NOT registered on network after updating to jellybeans - Galaxy S III Q&A, Help & Troubleshooting

after updating to jelly beans BTU firmware via Odin now my fone keeps saying NOT registered on network.iv tried CSC changer and factory resetting nothing works keeps saying NOT registered on network plzzzz helppp anyone??????

Question one is always have you the correct IMEI .
Question two likewise have you entered your network connection APN details .
jje

i got the same problem,i was using 4.1.1 till yesterday and it was rooted too, today i flashed official stock rom of 4.1.2 using odin. now system status changed from modified to normal and when i dial any number it says not registered to the network. imei is still the same. someone pls help

sahalmohd said:
i got the same problem,i was using 4.1.1 till yesterday and it was rooted too, today i flashed official stock rom of 4.1.2 using odin. now system status changed from modified to normal and when i dial any number it says not registered to the network. imei is still the same. someone pls help
Click to expand...
Click to collapse
Question two likewise have you entered your network connection APN details .
Correct CSC for your network correct firmware correct modem .
jje

JJEgan said:
Question two likewise have you entered your network connection APN details .
Correct CSC for your network correct firmware correct modem .
jje
Click to expand...
Click to collapse
APN details are correct, i was using a stock JB 4.1.1 for india.everything was fine then.i updated to stock jb 4.1.2 for india today. so csc and firmware should be correct. how do we know if its something wrong with modem drivers?

flash a different modem

Related

[Q] LOST 3G & Packet data after Rom change

I used MIUI ROM by rayglobe with siyah kernel and it worked perfect but when i changed back to cm10 i lost 3g and data network, everything its activated
everything its activated, and i still dont se3g icon or data package icon...
Can somebody please help me...i need to fix this so i can read my emails outside my wifi..
One is your IMEI correct .
Two do you have the correct Modem.
Three have you entered your network settings OR do you have the correct CSC for your network .
jje
[email protected] said:
I used MIUI ROM by rayglobe with siyah kernel and it worked perfect but when i changed back to cm10 i lost 3g and data network, everything its activated
everything its activated, and i still dont se3g icon or data package icon...
Can somebody please help me...i need to fix this so i can read my emails outside my wifi..
Click to expand...
Click to collapse
1) Check ur APN settings and see r they intact.
2) try a diff modem and see if it resolves ur issue
JJEgan said:
One is your IMEI correct .
Two do you have the correct Modem.
Three have you entered your network settings OR do you have the correct CSC for your network .
jje
Click to expand...
Click to collapse
I have the correct IMEI but i dont know if i have the correct MODEM, i dont know what you mean with MODEM and how do i change it ant to what should i change it to?
Search via the INDEX for MODEM thread .
You change to any modem you want and preferably the one that worked for you . Check your original firmware Baseband is the modem ..
jje
JJEgan said:
Search via the INDEX for MODEM thread .
You change to any modem you want and preferably the one that worked for you . Check your original firmware Baseband is the modem ..
jje
Click to expand...
Click to collapse
i uploded a screenshot so you can se my baseband, right know i have I9300XXDLH6 is that right or should i change it?
Right as in what ???
Right is the one that works for you or came with the firmware .
jje
JJEgan said:
Right as in what ???
Right is the one that works for you or came with the firmware .
jje
Click to expand...
Click to collapse
I just found the original firmware that came with the phone and flashed the phone to stock and fixed the APN.. i have the right modem and it still dont want to work..
@up
Friend from my polish forum has the same error see http://forum.xda-developers.com/showthread.php?t=1918601Maybr it will help
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
Try a diffrent modem
Sent from my HTC Incredible S using xda app-developers app

my s3 not registered on network

hello friends
i am installed JB V 4.1.2 (i9300JKELK4 - i9300XXELL4) on my galaxy s3 form sammobile.com
but when i call anyone it's not running & send massege (not registered on network)
reflash a modem.
check your imei.
check your csc
this has been discussed dozens of times
Glebun said:
reflash a modem.
check your imei.
check your csc
this has been discussed dozens of times
Click to expand...
Click to collapse
How can I do that?
Read the basics before you flash any rom or mod .
http://forum.xda-developers.com/showthread.php?t=1927113
Your IMEI should match under the battery if you have wrong then restore your backed up EFS folder . If you failed then its a samsung job .
If you did not flash firmware for your region then the modem and or CSC may not be compatible .
Suggest you restore your original saved firmware .
jje

[Q] Please help. Dont know what modem to use?

Hello,
I own a samsung galaxy s3 gt i9300. I rooted my phone and stuck to stock modem for a while. I then flashed paranoid android 3.15 on it which still used the stock modem. Then i flashed omega rom on it which changed the modem I guess and now I cannot connect to my local number. My IMEI number is there so my EFS is secure ( I have backups of it too). I tried flashing XXELLA modem first since that came stock with the phone when it came. I tried multiple other modems like XXEMB6 and XXEMC2. But it wont connect to my mobile number. I live in Pakistan and bought it factory unlocked from samsung.
Can someone please guide me as to which modem to flash? This is a modem problem right? Because that means I can never flash custom software with different modems. Or is it a CSC problem?
This is the thread i used for flashing/downloading modems! http://forum.xda-developers.com/showthread.php?t=2076857
First attachment is the stock configuration the phone came with
Second is the new ROM i put in which is omega rom.
I even restored my nandroid backup of the stock working official samsung ROM. But still no connectivity. Someone help please!?
omgbuffguy said:
Hello,
I own a samsung galaxy s3 gt i9300. I rooted my phone and stuck to stock modem for a while. I then flashed paranoid android 3.15 on it which still used the stock modem. Then i flashed omega rom on it which changed the modem I guess and now I cannot connect to my local number. My IMEI number is there so my EFS is secure ( I have backups of it too). I tried flashing XXELLA modem first since that came stock with the phone when it came. I tried multiple other modems like XXEMB6 and XXEMC2. But it wont connect to my mobile number. I live in Pakistan and bought it factory unlocked from samsung.
Can someone please guide me as to which modem to flash? This is a modem problem right? Because that means I can never flash custom software with different modems. Or is it a CSC problem?
This is the thread i used for flashing/downloading modems! http://forum.xda-developers.com/showthread.php?t=2076857
First attachment is the stock configuration the phone came with
Second is the new ROM i put in which is omega rom.
I even restored my nandroid backup of the stock working official samsung ROM. But still no connectivity. Someone help please!?
Click to expand...
Click to collapse
Multiple modems suggests you have not entered the correct network APN settings for your network .
Or Sim is faulty .
jje
JJEgan said:
Multiple modems suggests you have not entered the correct network APN settings for your network .
Or Sim is faulty .
jje
Click to expand...
Click to collapse
Called up the network. Everything is fine on their end. And I was told APN settings is just for Mobile Internet (GPRS/Edge yeah I know Pak doesnt have 3G yet lol). It happened right after flashing the new modem. Any other solutions?
omgbuffguy said:
Called up the network. Everything is fine on their end. And I was told APN settings is just for Mobile Internet (GPRS/Edge yeah I know Pak doesnt have 3G yet lol). It happened right after flashing the new modem. Any other solutions?
Click to expand...
Click to collapse
Usual suspects .
Wrong IMEI .
Sim Faulty
CSC or mobile settings APN etc wrong .
Modem .
jje
JJEgan said:
Usual suspects .
Wrong IMEI .
Sim Faulty
CSC or mobile settings APN etc wrong .
Modem .
jje
Click to expand...
Click to collapse
I checked the IMEI. Still there.
Sim works properly on another phone.
CSC settings I tried of many regions (through CSC changer app) from EUR to PAK to even MID (middle east)
As for modem, I flashed stock firmware from sammobile for Pakistan, the latest one, and it still refuses to connect. APN is fine according to network.
P.S. I dont know if this holds importance or not, but I did experience SDS. And my local repair shop (owing to the abysmal samsung warranty policy in pakistan) repaired it. But they did not change the motherboard. They changed the 'chipset' only and upgraded it to 4.1.2 firmware with the sds patch fix. Might be a stupid question, but could it be that the new chip hardware they put in is from a different region, so they had to flash a different regions firmware, and the answer to all my problems could be flashing the one they flashed after i ask them!?
Thank you!
anyone?
Read the rules, do not bump before 24 hours has passed. I will report it next time.
omgbuffguy said:
I checked the IMEI. Still there.
IMEI as under the battery .
A guess is that service centre broke something .
A guide on how to reinstall stock firmware without flashing by using KIES
http://forum.xda-developers.com/showthread.php?t=1978840
jje
Click to expand...
Click to collapse
Try (Ariza Pach ) from xda, it solved my network problem. Push Thanks Button if I Helped :thumbup:

Galaxy S3 Android 4.3 no signal

Yesterday I updated my i9300 to android 4.3
Baseband version I9300BUUGMJ3
Build number JSS15J.I9300XXUGMJ9
..and since then I haven't had any reception. My imei number, serial number, and everything else is same and still there, but I just can't get it to get reception again... When I go to my Mobile Networks, it says registered on network, but again, no reception. Then I tried installing the modem BUUGMJ3 with odin which didn't work. What can help? Stock firmware? Please help.
Thanks in advance.
currently experiencing the same issue mate. I can't seem to find a workaround/solution for this -__-
Is that base band supposed to work in your country? Find an modem later than EMGx, without a RIL, for your country and install that to test.
boomboomer said:
Is that base band supposed to work in your country? Find an modem later than EMGx, without a RIL, for your country and install that to test.
Click to expand...
Click to collapse
I've probably made a big mistake there, no it's meant for mine country, it's for the county near mine, Croatia, but I read somewhere that this doesn't matter.. :/
And by 'later than EMGx' I'm not sure what you mean, but I've flashed EMG4 modem which didn't seem to work.
Found something about flashing a previous modem and restoring your EFS folder, but I do not have my EFS folder backed up - I forgot to.
A few days ago I paid about $30 for a repair on my phone, I don't really want to send it off for repairs again, I really wonder if there is an fix to this
Follow the guides in general forum, stickies on how to flash back to 4.1.2 stock rom. Make sure it's at least EMG4 base band.
boomboomer said:
Follow the guides in general forum, stickies on how to flash back to 4.1.2 stock rom. Make sure it's at least EMG4 base band.
Click to expand...
Click to collapse
Yeah, about that...
first of all, sorry for bugging you so much..
but I downloaded the right stock firmware for my country, I9300XXEMG4_I9300BHTEMH1_I9300XXEMG4, but after I flash it via odin when the phone turns on it gets stuck in a loop showing the Samsung logo repeatedly...
Edit:
Okay, I managed to install the stock firmware 4.1.2 but it still is showing 'Emergency calls only', the modem is xxemg4...
Delko said:
Yeah, about that...
first of all, sorry for bugging you so much..
but I downloaded the right stock firmware for my country, I9300XXEMG4_I9300BHTEMH1_I9300XXEMG4, but after I flash it via odin when the phone turns on it gets stuck in a loop showing the Samsung logo repeatedly...
Edit:
Okay, I managed to install the stock firmware 4.1.2 but it still is showing 'Emergency calls only', the modem is xxemg4...
Click to expand...
Click to collapse
how about your IMEI/Serial numbers? are they still the same before you downgrade and flashed the XEMG4 modem? mine are the same with SN/IMEI so I guess that's why it worked. I just took the risk cause I was really pissed experiencing the lag and the battery drain in 4.3.
Do factory reset from settings option in touch wiz, make sure the imei and serial number match the label under your battery.
If still no good then try another SIM in your phone, final steps would be restore efs backup then repair centre.
thehavoc said:
how about your IMEI/Serial numbers? are they still the same before you downgrade and flashed the XEMG4 modem? mine are the same with SN/IMEI so I guess that's why it worked. I just took the risk cause I was really pissed experiencing the lag and the battery drain in 4.3.
Click to expand...
Click to collapse
Well it's all the same as it used to be. Could it be that the modem I had before EMG4 changed the format of my efs folder?
boomboomer said:
Do factory reset from settings option in touch wiz, make sure the imei and serial number match the label under your battery.
If still no good then try another SIM in your phone, final steps would be restore efs backup then repair centre.
Click to expand...
Click to collapse
Did a factory reset, imei, s/n same.
Android 4.1.2 EMG4 modem still no reception.
It seems that MGX modem has change ur IMEI from /efs1 to /efs2. MGX modem seems to support only 4.3 roms (due to some security issue).
It is not recommended,but u could flash an older rom with modem (get from www.sammobile.com) then restore an efs backup (if u did some) from /efs2 to /efs1
Sent from my GT-I9300 using xda app-developers app
Samsung Galaxy S3 i9300 "not Registered on Network" after 4.3 I9300XXUGMJ9 Update
I recently installed 4.3-official-I9300XXUGMJ9 on my Samsung Galaxy S3 (i9300) and everything went fine. I was upgrading from 4.1.2 but now I am facing “Not Registered on network” Issue. I tried Arzia Patch, tried falshing Modems (I9300XXLG8 and BUUGMJ3 ) nothing Works.
FYI: My serial Kay or IMEI is not 0000 they are fine.
Here’s the list from Setting->About Device->Status<br>
Network: unknown<br>
Service State: Out of service<br>
Mobile Network State: disconnected<br>
Device Status: Official
Also My Sim works fine in other Phones. Any help will be greatly appriciated.
dmarkweb said:
I recently installed 4.3-official-I9300XXUGMJ9 on my Samsung Galaxy S3 (i9300) and everything went fine. I was upgrading from 4.1.2 but now I am facing “Not Registered on network” Issue. I tried Arzia Patch, tried falshing Modems (I9300XXLG8 and BUUGMJ3 ) nothing Works.
FYI: My serial Kay or IMEI is not 0000 they are fine.
Here’s the list from Setting->About Device->Status<br>
Network: unknown<br>
Service State: Out of service<br>
Mobile Network State: disconnected<br>
Device Status: Official
Also My Sim works fine in other Phones. Any help will be greatly appriciated.
Click to expand...
Click to collapse
Ariza patch only works on older modems (efs v1 modems). So, that wont help.
You said you flashed the zuluman modems but.... did you flash the patched kernels too? You need the patched kernels for the patched modems to work. I don't know why, but that's what zuluman says (according to him, the kernel has a modem signature check and it wont work if the modem was modified).
Gonzakpo said:
Ariza patch only works on older modems (efs v1 modems). So, that wont help.
You said you flashed the zuluman modems but.... did you flash the patched kernels too? You need the patched kernels for the patched modems to work. I don't know why, but that's what zuluman says (according to him, the kernel has a modem signature check and it wont work if the modem was modified).
Click to expand...
Click to collapse
Sorry didn't tried flashing kernal. since I didn't find that file, because wasn't available for download. can you help me find a combination of Modem+kernal??
Thanks
dmarkweb said:
Sorry didn't tried flashing kernal. since I didn't find that file, because wasn't available for download. can you help me find a combination of Modem+kernal??
Thanks
Click to expand...
Click to collapse
Here are all the patched modems and kernels made by zuluman.
https://drive.google.com/folderview...&usp=sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8
In my opinion you should flash the latest official firmware and download the appropiate modem and kernel from that google drive.
You can download the latest official firmware from the general section of this forum.
Good luck.
Remember to always have an efs backup!
Great thanks!
Gonzakpo said:
Here are all the patched modems and kernels made by zuluman.
https://drive.google.com/folderview...&usp=sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8
In my opinion you should flash the latest official firmware and download the appropiate modem and kernel from that google drive.
You can download the latest official firmware from the general section of this forum.
Good luck.
Remember to always have an efs backup!
Click to expand...
Click to collapse
Flashing the Modem + Kernal after rooting the Phone works for me. I have flashed it using CWM.
Thanks once again.
the same problem with signal
hello,
i've the same problems with my s3. i flashed it OTA to Android 4.3
After this i had no signal. ...
When i found this thread i was so happy. BUT!!!
i downloaded all the modem and kernel files from the google drive and wanted to flash them (Patched_XXUGMK6_xxx.zip) with cwm recovery (latest version).
whenever i want to do this, i get the following message and the update aborts: "E:Can't copy META-INF/com/google/android/update-binary"
what can i do? Can i flash them with odin, too? Or does anybody have another idea?
here are some Infos about my Phone:
Android-Version: 4.3
Baseband: I9300XXUGMK6
Kernel: 3.0.31-2191747
[email protected] #1
Tue Nov 26 16:57:12 KST 2013
Build: JSS15J.I9300XXUGMK6
hmm...
can nobody help me? ...
sorry for spamming, but i've got a problem without a phone
greetz,
Carpe.
You said your imei & serial is ok but you cannot register to network. Have you paid your bills?
But if it's corrupted serial number.
Try this guide.
thx for your answer.
Payed my bills? ... uuuuuups!
back to topic: i've flashed my phone back to 4.1.2 for the moment. Network seems to work. ... i'll try some things and give a feedback here. ...
You have to flash an Android 4.3 modem for it to work I think but as your on 4.1.2 now I guess it doesn't matter anymore
Sent from my GT-I9300 using Tapatalk

[Q] Galaxy S3 "Not Registered on Network" Problem

I am using an international version of galaxy s3 in Pakistan. my previous stock ROM was I9300XXUGMK6 which is UK based and it was working fine in pakistan. Today I downloaded I9300XXUGNB6_I9300OJVGNB3_PAK ROM from sammobiles and flashed the ROM on my phone using Odin. After installing that stock ROM my phone is giving error of "Not Registered on Network" whenever i try to make a call. my IMEI number is same as printed on the back of the phone. signal bar is also full. when I manually search for networks then it also shows me all the network name in the area and when I select the network it give me message that network registered. but I could not make the call after that.
Plzzz help me....
Search and read there is no easy solution. Try a patched modern and kernel, which are usually needed when the efs has been broken.
Thanks
boomboomer said:
Search and read there is no easy solution. Try a patched modern and kernel, which are usually needed when the efs has been broken.
Click to expand...
Click to collapse
Thanks bro...
I have found patched modem and kernel. installed it using twrp recovery and now my phone is working fine.
mubashirsaeed said:
Thanks bro...
I have found patched modem and kernel. installed it using twrp recovery and now my phone is working fine.
Click to expand...
Click to collapse
Can you share me the modem and kernel, which helped you solve the problem. ¡Thanks!

Categories

Resources