PHP:
Hello newbie here. I am trying to flash ROM option on the latest CM10 release. CM10 rom install successfully but ROM option fails to install on aroma installer (status 0).
wanted to paste error log but the forum prevent it so please refer attachment
Tried to wiped partiions (data, cache, dalvik), checked MD5, but no luck. If someone can advice, I'd be very appreciated. Thanks for reading
beerippon said:
PHP:
Hello newbie here. I am trying to flash ROM option on the latest CM10 release. CM10 rom install successfully but ROM option fails to install on aroma installer (status 0).
wanted to paste error log but the forum prevent it so please refer attachment
Tried to wiped partiions (data, cache, dalvik), checked MD5, but no luck. If someone can advice, I'd be very appreciated. Thanks for reading
Click to expand...
Click to collapse
Make sure to use the correct recovery. Do not use ROM manager whatsoever. What are you using?
Sent from my SCH-R950 using XDA
na7q said:
Make sure to use the correct recovery. Do not use ROM manager whatsoever. What are you using?
Sent from my SCH-R950 using XDA
Click to expand...
Click to collapse
Hi, thanks or replying.
I'm using cwm 5.5.0.4. I installed all the previous roms byt this without any problem but when I came to this romoption, it did not install the gsm/ storage option correctly.
Just tried out the latest cm10 11.2 rom, this rom includes all options and is in one go. Install went ok and now having correct gsm setting. Maybe there were some steps missing when I install 10.30 rom?
Try doing all the steps over again and make sure your not missing anything. Also make sure you have the correct rom for the phone you're trying to use. (ie. Don't use a rom made for a nexus s if you have an evo)
Sent from my MB855 using xda app-developers app
beerippon said:
Hi, thanks or replying.
I'm using cwm 5.5.0.4. I installed all the previous roms byt this without any problem but when I came to this romoption, it did not install the gsm/ storage option correctly.
Just tried out the latest cm10 11.2 rom, this rom includes all options and is in one go. Install went ok and now having correct gsm setting. Maybe there were some steps missing when I install 10.30 rom?
Click to expand...
Click to collapse
tried updating cwm by th3bill uploaded as well, but still no luck. some of the roms works though...
Not sure what factors are contributing installing tweaks.
tiltospe said:
Try doing all the steps over again and make sure your not missing anything. Also make sure you have the correct rom for the phone you're trying to use. (ie. Don't use a rom made for a nexus s if you have an evo)
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
I wiped cache, data, system, dalvik, then put factory wipe (I think factory wipe is not required but just incase), Then rom flash. (for aroma installer, I choose full wipe in here too, so effectively wiping at least twice)
I use photon ROMs for my Photon, though my photon is from KDDI while nearly all of forum member use either from sprint or USSC. This might be the reason I am stuck.
The problem persist in CM10 11/04.
Related
Hi,
I am on cm10 since this morning (GSM build) absolutely fantastic( Thanks to jokersax and th3bill and whoever else) but after flashing the latest gapps v3 i am getting fcs in google play music and apollo. Any solutions
Did a davlik cache wipe and installed cm10 and gapps fresh and the fcs are gone
Sent from my MB855 using xda app-developers app
How to
karamathdr said:
Hi,
I am on cm10 since this morning (GSM build) absolutely fantastic( Thanks to jokersax and th3bill and whoever else) but after flashing the latest gapps v3 i am getting fcs in google play music and apollo. Any solutions
Click to expand...
Click to collapse
Hi can you please tell me the steps you followed to install CM10 on your motorola photon... I already tried and avoided CM9 installation. because the phone stucked in the boot menu itself...
SO please help me to install CM10 please
ganeshshas said:
Hi can you please tell me the steps you followed to install CM10 on your motorola photon... I already tried and avoided CM9 installation. because the phone stucked in the boot menu itself...
SO please help me to install CM10 please
Click to expand...
Click to collapse
Boot into cwm, wipe cache, system, data, dalvik, install the ROM, install gapps. Make sure you're unlocked and have cwm recovery installed.
GSM error
Acvice said:
Boot into cwm, wipe cache, system, data, dalvik, install the ROM, install gapps. Make sure you're unlocked and have cwm recovery installed.
Click to expand...
Click to collapse
Yes I got CM10 in my motorola photon. But I have issues I cant able to get mobile "Signal" It showing error in network search. I'm using Airte network.Dont know how to fix this ?
ganeshshas said:
Yes I got CM10 in my motorola photon. But I have issues I cant able to get mobile "Signal" It showing error in network search. I'm using Airte network.Dont know how to fix this ?
Click to expand...
Click to collapse
Try typing *#*#4636#*#* in dialer and changing to 'any gsm prl'. Also make sure your running the GSM version of cm10. I have no idea where you live or what kind of network airte is but I would assume its GSM.
I have an AT&T Note that I rooted using the Odin method. I was running stock ICS and I know the root worked because I was able to install Google Now and it worked fine.
So I decided I wanted to try a different ROM. I just wanted to install bigfau's cleaned up stock rom found here. I put the zip file on my phone, booted into CWM, did a wipe, found the zip, said it installed fine and then I rebooted. At boot it just sits at the Samsung screen. I let it sit for 30 minutes, still nodda.
So I grab odin and flash back to stock ICS. Use the same method to root and I try a different ROM. This time the Pure Stock ICS from bigfau, same problem.
Odin back to stock, root, and I try parandoidandroid found here - same problem.
Do it all again and try a ROM from another site called HYFR Only One, which is a SGS3 based rom. Same deal.
The only thing I can get it to do is ODIN to stock. Am I missing something?
(I have another rooted galaxy note that I do not have any issues with flashing roms but it was already rooted when I got it.)
berdo said:
I have an AT&T Note that I rooted using the Odin method. I was running stock ICS and I know the root worked because I was able to install Google Now and it worked fine.
So I decided I wanted to try a different ROM. I just wanted to install bigfau's cleaned up stock rom found here. I put the zip file on my phone, booted into CWM, did a wipe, found the zip, said it installed fine and then I rebooted. At boot it just sits at the Samsung screen. I let it sit for 30 minutes, still nodda.
So I grab odin and flash back to stock ICS. Use the same method to root and I try a different ROM. This time the Pure Stock ICS from bigfau, same problem.
Odin back to stock, root, and I try parandoidandroid found here - same problem.
Do it all again and try a ROM from another site called HYFR Only One, which is a SGS3 based rom. Same deal.
The only thing I can get it to do is ODIN to stock. Am I missing something?
(I have another rooted galaxy note that I do not have any issues with flashing roms but it was already rooted when I got it.)
Click to expand...
Click to collapse
Rooted has nothing to do with flashing a ROM, having CWM or TWRP will give you the cap to flash a ROM.
I have used these Recovery types for flashing:
Touch CWM: http://forum.xda-developers.com/showthread.php?t=1584576
TWRP: http://forum.xda-developers.com/showthread.php?t=1647575
After you have CWM of some type ensure you are doing a clean wipe, this is how I perform my wipes:
1. Download to sdcard
2. Reboot to CWM-based Recovery
3. Wipe data/factory reset
4. Wipe Cache partition
5 Go into advanced> Wipe Dalvik Cache
6. Go into> Mounts & Storage
a. Format /data
b. Format /system
c. Format /cache
Install rom & Reboot
After the first boot up let it sit for a few min to build...then do your set ups.
btw there is a Q&A section.
bigjoe2675 said:
Rooted has nothing to do with flashing a ROM, having CWM or TWRP will give you the cap to flash a ROM.
I have used these Recovery types for flashing:
Touch CWM: http://forum.xda-developers.com/showthread.php?t=1584576
TWRP: http://forum.xda-developers.com/showthread.php?t=1647575
After you have CWM of some type ensure you are doing a clean wipe, this is how I perform my wipes:
1. Download to sdcard
2. Reboot to CWM-based Recovery
3. Wipe data/factory reset
4. Wipe Cache partition
5 Go into advanced> Wipe Dalvik Cache
6. Go into> Mounts & Storage
a. Format /data
b. Format /system
c. Format /cache
Install rom & Reboot
After the first boot up let it sit for a few min to build...then do your set ups.
Click to expand...
Click to collapse
I apologize if I did not make this clear but I have Rom Manager installed and CWM was updated to the latest version. I would reboot into CWM, do a factory reset, wipe cache, dalvik caceh, install rom and reboot. It would just sit at the samsung screen. I did not go into mounts and storage and do that but I will now. The process I use on my AT&T note is the same process I used on my Rogers note and I am able to install any ROM i want on my rogers note.
I have flashed roms probably over 100 times since my samsung captivate. I just didn't know if the note had another step involved. Like S-Off on HTC phones for example.
I have been using the standard version of cwm but I am trying the touch version now. Will update.
Same problem. I am uploading a video to youtube now. I will post in a minute or so.
did you check if bootloader is unlocked?
berdo said:
Same problem. I am uploading a video to youtube now. I will post in a minute or so.
Click to expand...
Click to collapse
U have busy box installed?
Sent from my SAMSUNG-SGH-I717 using xda premium
animatechnica said:
did you check if bootloader is unlocked?
Click to expand...
Click to collapse
elry567 said:
U have busy box installed?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Animatechnica - It is my understanding that the bootloader is not locked on the Galaxy Note. I have not seen anything about unlocking the bootloader in any thread on the i717.
elry567 - do not have busy box installed - never saw anything requiring it to be installed. I will try that as well.
Well this time I got a status 7 error in CWM which can be a lot of different things. I am up to date on CWM, the rom I know works for the galaxy note (I am running it on my other one AND I have seen video of it working on an AT&T branded Note) so I don't know. I did a google search on the error and everything I found does not seem to apply. It is really starting to piss me off. Any help is appreciated.
Here is the video, sorry about my cam skills but you get the gist. I took this video with a i717r that is running the rom I want to install on the phone in the video.
Are you entering recovery with the phone off then using the buttons, or flashing from rom manager?
You should be doing it by the button method.
rangercaptain said:
Are you entering recovery with the phone off then using the buttons, or flashing from rom manager?
You should be doing it by the button method.
Click to expand...
Click to collapse
Done both, doesn't seem to make a difference. I will definitely use the button method from here on out though.
Try using TWRP? It seems CWM doesn't want to work for you, so try using TWRP instead.
Sent from my SAMSUNG-SGH-I717 using xda premium
Zwarx said:
Try using TWRP? It seems CWM doesn't want to work for you, so try using TWRP instead.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
HOLY F&(%*&G $&!t twrp may have worked. I had to go full back to 100% stock with 3e recovery and 0 flash counter. Use a new root method, flash twrp via goo app and so far so good.
Seriously I do not know who you are but I could kiss you. I wonder why CWM wouldn't work? I have used it to load custom roms on just about every other android phone I have had.
OH well, consider this solved.
Zwarx said:
Try using TWRP? It seems CWM doesn't want to work for you, so try using TWRP instead.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
+1
berdo said:
HOLY F&(%*&G $&!t twrp may have worked. I had to go full back to 100% stock with 3e recovery and 0 flash counter. Use a new root method, flash twrp via goo app and so far so good.
Seriously I do not know who you are but I could kiss you. I wonder why CWM wouldn't work? I have used it to load custom roms on just about every other android phone I have had.
OH well, consider this solved.
Click to expand...
Click to collapse
Sir, he is one of many, that is part of this great Community the GNote. As you can see we just provide the tools and point you to the way we went...it is up to you to get it going, and you did by the see of it....slap a thanks to all these that posted in your thread, (not me) due to the fact, I have seen threads go viewed many times that have no one replies to it, but not around here....
glad it worked out..
bigjoe2675 said:
+1
Sir, he is one of many, that is part of this great Community the GNote. As you can see we just provide the tools and point you to the way we went...it is up to you to get it going, and you did by the see of it....slap a thanks to all these that posted in your thread, (not me) due to the fact, I have seen threads go viewed many times that have no one replies to it, but not around here....
glad it worked out..
Click to expand...
Click to collapse
Done.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Hey guys, last week I installed MROM (http://www.montuori.net/android-mrom/atrix-mrom/) and had been using it without having any problem, I loved it. Yesterday, I heard a kernel that can be good for battery life so I wanted to install it. (http://www.montuori.net/android-mrom/atrix-kernels/ sv build) I installed it and first boot took about 10+ mins. but after first reboot it was normal. And I started having problems like it freezes and the phone shut down itself. sometimes restarts itself. and when using an application (like facebook, dolphin browser, games etc.), it suddenly closes the application.
I also tried to install other kernels but it gives me an error when I try to install it (installation aborted error) . how can I go back to my first MROM times? but I don't want to lose any data in my phone like my applications and settings. How can I do it? Can anybody give me some advice?
Also, what's that MROM update.zip? Is there anybody who knows it? If I install it, does it solve the problem that I'm having?
If I install MROM again, does it delete the apps in my phone? Its an emergency guys, I can't use my phone normally. Thanks in advance.
Happy new year!!
Wipe cache & dalvik cache, then reinstall mrom. Your apps, etc should be unaffected.
LāvLab / HostileSlothRecords
LavLab said:
Wipe cache & dalvik cache, then reinstall mrom. Your apps, etc should be unaffected.
LāvLab / HostileSlothRecords
Click to expand...
Click to collapse
I still can't install even MROM. gives an error, exactly like;
--Installing: /sdcard/atrix-MROM-20121111.zip
Finding update package...
Openin update package...
E:Can't open /sdcard/atrix-MROM-20121111.zip
(bad)
Installation aborted.--
I'm about to lose my mind. :/
you could try to re-install MROM and see where this gets you - do not wipe any data/system when installing and you should have everything still on your phone.
IF that fails to solve problem you could try and use Titanium back up to save YOUR apps (not system apps) and then do a full wipe of your phone and re-install MROM
I'm around for a bit so will check on how you're doing
good luck
when i try to reinstall, it gives me the same error. now im going to back up my all apps and after that factory reset and finally will try to reinstall mrom. I'll write when I do this. thanks
I did everything right, wiped all data cache and tried to reinstall mrom but it gives me the same error :/
koline said:
I did everything right, wiped all data cache and tried to reinstall mrom but it gives me the same error :/
Click to expand...
Click to collapse
what happens when you turn on phone?
are you able to install another rom?
It might be an idea to download a fresh copy of MROM and see if that helps?
also, after putting the new rom on the phone but before installing go to 'mounts and storage' (in the CWM menu list) and format the following 'pre-install, system, osh, data and cache'
I hope that helps.
barry_ said:
what happens when you turn on phone?
are you able to install another rom?
It might be an idea to download a fresh copy of MROM and see if that helps?
also, after putting the new rom on the phone but before installing go to 'mounts and storage' (in the CWM menu list) and format the following 'pre-install, system, osh, data and cache'
I hope that helps.
Click to expand...
Click to collapse
really thank you for your advices. I did everyting you said step by step. I tried to install other ROM (CM7.2) after formatting the parts that you said, and it was succesfull. after that i tried to install google apps but it's giving me the same error. anyway, I tried to install MROM again but still the same, same error, unfortunately. I'm out of my mind. :/
koline said:
really thank you for your advices. I did everyting you said step by step. I tried to install other ROM (CM7.2) after formatting the parts that you said, and it was succesfull. after that i tried to install google apps but it's giving me the same error. anyway, I tried to install MROM again but still the same, same error, unfortunately. I'm out of my mind. :/
Click to expand...
Click to collapse
glad that you got somewhere, If i were you I might try and repeat the steps you used with success (install cm 7.2) and then just add what google apps you need separately and see where that takes you.
Happy new Year!!
barry_ said:
glad that you got somewhere, If i were you I might try and repeat the steps you used with success (install cm 7.2) and then just add what google apps you need separately and see where that takes you.
Happy new Year!!
Click to expand...
Click to collapse
I thought, If I try all these steps from the begining, maybe it'd be successful (from stock rom!!) so that I installed back my stock rom with RSD Lite. and rooted, unlocked, installed CWM Recovery. and I have just tried to install MROM but it's still giving me the same error. I really can't understand why... It was like my first day of my phone, I did every single step from the begining, but still the same error. omg
Have you tried re-downloading mrom?
LāvLab / HostileSlothRecords
LavLab said:
Have you tried re-downloading mrom?
LāvLab / HostileSlothRecords
Click to expand...
Click to collapse
yes, still the same...
Guys I have solved the problem by installing goo manager and touch recovery. Now I'm using MROM! YES! really thank u all for ur advices
Sent from my MB860 using xda app-developers app
koline said:
Guys I have solved the problem by installing goo manager and touch recovery. Now I'm using MROM! YES! really thank u all for ur advices
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
strange.. what made the difference?
toyota86 said:
strange.. what made the difference?
Click to expand...
Click to collapse
I really didn't understand how. Although I went back my stock rom and reinstalled everything(unlock, root, cwm etc), it didn't work but after installing that goo app it did
Sent from my MB860 using xda app-developers app
I recently attempted to root my HTC thunderbolt, and to do so I used the htc dev unlocker and then this "HTC Thunderbolt Tool'
rootzwiki.com/topic/27310-all-in-one-the-htc-thunderbolt-tool
After that I downloaded a rom and installed it through the 4ext recovery, it all install fine and I did do a factory/data reset but whenever I reboot after the rom install, I get the HTC white bootloader and then the screen become black with a back light to it.
I have tried a number of times to re-install the rom and have tried to use other roms but all of them seem to end the same way.
I have used:
BAMF FOREVER 1.1
BAMF MECHA ICS
AIRBORNE GOUI
Killsense 3.7.19
Lightning501
few more
My phone is a HTC Thunderbolt and when I attempted to root the phone it had a hboot version of 1.0.8 and had a stock version of ICS installed.
Sadly I have a phone without a working rom and I had forgot to make a backup so if anyone can help it would be greatly appreciated. Preferably I would like to keep the phone rooted but its not necessary.
Thank You
I'm a total xda-developor noob, so I hope I didn't mis a thread with a the solution all ready on it.
Make sure you do the factory reset, wipe dalvik and cache. Flash the ROM and reboot. Sounds like your missing a step somewhere 8)
Sent from my ADR6400L using xda app-developers app
tburns said:
Make sure you do the factory reset, wipe dalvik and cache. Flash the ROM and reboot. Sounds like your missing a step somewhere 8)
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
I have tried clearing everything but still doesn't seem to work.
One thing I forgot to mention is sometimes if I wait long enough on the blank screen It boots me back into the 4ext recovery, don't know if that makes much of a difference.
The way I have been installing the rom
Load ROM onto the SD
Do a "wipe data/factory reset"
Go into install sd and choose the Rom which is in a .zip file
I think this is how its supposed to be done, but not sure.
aplysenko said:
I have tried clearing everything but still doesn't seem to work.
One thing I forgot to mention is sometimes if I wait long enough on the blank screen It boots me back into the 4ext recovery, don't know if that makes much of a difference.
The way I have been installing the rom
Load ROM onto the SD
Do a "wipe data/factory reset"
Go into install sd and choose the Rom which is in a .zip file
I think this is how its supposed to be done, but not sure.
Click to expand...
Click to collapse
You need to wipe cache and dalvik cache too.
Sent from my Nexus 7 using Tapatalk 2
disconnecktie said:
You need to wipe cache and dalvik cache too.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I have done that.
Problem is you were coming from the ICS OTA.
The All In One Tool alone will not get you rooted after taking the OTA.
In order to fully root and s-off after having the OTA loaded, you would need to follow the steps outlined HERE
santod040 said:
Problem is you were coming from the ICS OTA.
The All In One Tool alone will not get you rooted after taking the OTA.
In order to fully root and s-off after having the OTA loaded, you would need to follow the steps outlined HERE.
Click to expand...
Click to collapse
Your link dont work for me, id assume you were pointing to this wonderful thread
Milimbar said:
Your link dont work for me, id assume you were pointing to this wonderful thread
Click to expand...
Click to collapse
Correct Thanks I fixed the link in my first post.
I am using the thread and so far its working, just one last question. Do I have to install and use 4ext, or can I just use clockwork mod?
aplysenko said:
I am using the thread and so far its working, just one last question. Do I have to install and use 4ext, or can I just use clockwork mod?
Click to expand...
Click to collapse
You can use whatever Recovery you want, Clockwork Mod is old and not really suggested to use, especially with newer roms.
I miss the RA recovery I had on my first bolt. I use the ext4 recovery now. Glad Santod was able to help you out!!
Sent from my ADR6400L using xda app-developers app
Suddenly I cannot flash ROMs. I've downloaded, and have tried to flash, 2 ROMs. They are downloaded correctly, too. I've downloaded them multiple times as well.
When I try to flash, it gives me a bunch of prop errors and then gives me an error that the ROM cannot be flashed. I am able to restore backups, though.
I'm not sure what's causing this, as it happened out of the blue. A few days ago I flashed a ROM fine but reverted back to my original ROM because I did not like the other ROM.
I always wipe data and wipe system, and have even wiped cache. Really I'm at a loss her so any help would be greatly appreciated.
what two roms are you trying to flash and on what recovery/version?
B_I_N_G_E said:
what two roms are you trying to flash and on what recovery/version?
Click to expand...
Click to collapse
Tried the Pac-Man ROM and another ROM that I forgot the name of. Recovery is TWRP but I'm not sure what version. It's the version that installed a long time ago when I first rooted and unlocked the device, so it's definitely not the newest version.
BoostinBen said:
Tried the Pac-Man ROM and another ROM that I forgot the name of. Recovery is TWRP but I'm not sure what version. It's the version that installed a long time ago when I first rooted and unlocked the device, so it's definitely not the newest version.
Click to expand...
Click to collapse
Download goo manager from play store. Open, menu button, install OpenRecoveryScript. That will update TWRP. Then try again.
Sent From My Sticky Note, Too?
B_I_N_G_E said:
what two roms are you trying to flash and on what recovery/version?
Click to expand...
Click to collapse
BoostedB18C said:
Download goo manager from play store. Open, menu button, install OpenRecoveryScript. That will update TWRP. Then try again.
Sent From My Sticky Note, Too?
Click to expand...
Click to collapse
Unfortunately I got the same error, albeit it seemed to move along a little more than before. The exact error is as follows:
"file_getprop: failed to stat /sdcard/kernal.pro. Error flashing zip (and a few other irrelevant things)"
BoostinBen said:
Tried the Pac-Man ROM and another ROM that I forgot the name of. Recovery is TWRP but I'm not sure what version. It's the version that installed a long time ago when I first rooted and unlocked the device, so it's definitely not the newest version.
Click to expand...
Click to collapse
In the older Casual root methods the installed recovery was for the international Note 2. and caused some issues on our VZW version.
As was mentioned, install the newest TWRP or CWM and you should be fine.
Also.... remember flashing between a 4.3 ROM and 4.2 and earlier have some differences. Make sure to really read and reread the OP to any ROM you are flashing as most have subtle differences in the recommended method to flash and recovery suggested.
Milimbar said:
In the older Casual root methods the installed recovery was for the international Note 2. and caused some issues on our VZW version.
As was mentioned, install the newest TWRP or CWM and you should be fine.
Also.... remember flashing between a 4.3 ROM and 4.2 and earlier have some differences. Make sure to really read and reread the OP to any ROM you are flashing as most have subtle differences in the recommended method to flash and recovery suggested.
Click to expand...
Click to collapse
Right now I'm on JellyBeans, which is a great ROM. I just wanted to try something different. That ROM is 4.1.2, IIRC.
CWM works? Hrm...gotta give that a try considering I bought it a while ago.
BoostinBen said:
Right now I'm on JellyBeans, which is a great ROM. I just wanted to try something different. That ROM is 4.1.2, IIRC.
CWM works? Hrm...gotta give that a try considering I bought it a while ago.
Click to expand...
Click to collapse
Tried CMW and I get the same error about the kernal.prop
I'm running Saber's kernal. Could it be something with that?
BoostinBen said:
Tried CMW and I get the same error about the kernal.prop
I'm running Saber's kernal. Could it be something with that?
Click to expand...
Click to collapse
I'm going to say the quote.
"Its time for a date with Odin." - @droidstyle
http://forum.xda-developers.com/showthread.php?p=34891181
Just start from scratch and you will be good.
Sent from my Nook Tablet
BoostedB18C said:
I'm going to say the quote.
"Its time for a date with Odin." - @droidstyle
http://forum.xda-developers.com/showthread.php?p=34891181
Just start from scratch and you will be good.
Sent from my Nook Tablet
Click to expand...
Click to collapse
Thanks. I'll give this a try and report back.
Sent from my SCH-I605 using Tapatalk 2
Interesting. I am able to load ROMs with the Aroma installer just fine, just not any that are regular ZIP files.
BoostinBen said:
Interesting. I am able to load ROMs with the Aroma installer just fine, just not any that are regular ZIP files.
Click to expand...
Click to collapse
Any ideas why zip installs give me a kernal.prop error?
BoostinBen said:
Any ideas why zip installs give me a kernal.prop error?
Click to expand...
Click to collapse
Have you tried just flashing a new kernel? there was some issues with a few versions of sabre kernel.... get the newest one or Perseus or something else.
Install the newest version of your recovery (CWM or TWRP)
Boot into recovery.
Clear dalvik/cache
Flash your kernel
Clear dalvik and cache again (just because thats what i do, no idea if its needed)
Test your installed ROM or just install a new ROM following the instructions in the OP of the ROM thread...
If there is no install instructions, I always:
Make a nandroid backup!
Clear dalvik/cache
Factory reset (wipe all but SD card, depending on your recovery)
Install ROM
Clear dalvik and cache again
Install GAPPS (Google Apps package) if not included in ROM
Reboot system
Profit?
Good Luck, report success/failure
BoostinBen said:
Any ideas why zip installs give me a kernal.prop error?
Click to expand...
Click to collapse
What kernel are you using?
Sent from my SCH-I605 using Tapatalk 2
michigan66 said:
What kernel are you using?
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
I'm using Saber's overclocked one. I will grab another kernal and give it a shot and report back.
Got this fixed by switching to another kernel.