Hi sorry if this has already been covered but I have a friend who has the korean version s2 currently on 2.3.5 but wants to run unbranded international version of 4.0.4 on it mainly to get past the 90 character sms limit build in, among other things. I attempted to flash the latest unbranded version of 4.0.4 but odin crashes right as it is finishing flashing the factory image. I am back into download mode now, I assume the problem is the korean firmware? ie I can only flash a korean version of ics? is this correct?
Thanks for any help
Dont worry everyone sorted it myself, bit more reading and found out I needed an additional pit file. working fine now.
Related
Earlier in June I received a Galaxy SII that was unbranded, but I had to return it due to a little circle that seemed to be 'burned' into the screen.
Now I finally received my new Galaxy S II but to my great disappointment it's loaded with Vodafone crap, and branded:
PDA:KE5 / PHONE:KE1 / CSC:KE2 (VDF)
I want to replace the branded FW for the official non branded FW and I was wondering how to do that.. I went to this thread but i'm not quite sure which FW i'll need.. Does anyone happen to know?
Use the XEN version of XWKF3 firmware, it's for the Netherlands.
As intratech said flag stock unbranded firmware for your country
You can also try latest 2.3.4 based roms as batista 70, cognition or vilian
Search on the development section
Sent from my GT-I9100 using XDA App
Thanks for the quick replies, i'm downloading the Kernel and FW now, but before I get to work with that:
how do i backup the complete kernel/fw of my phone as it is right now, in case I ever have to send it in for repairs and don't want to void my warranty?
Will I be able to update future firmwares with KIES or will i have to keep doing it manually once I install the unbranded firmware?
After flashing the XWKF3 XEN firmware on my phone instructions say i need to flash the insecure kernel before i can flash the stock XWKF3 kernel. I was wondering which Chainfire version I have to get. I think it's the KF3 one from this post but I'd like to make very sure before I start doing things.
Then after flashing the Chainfire kf3 kernel I can use Odin in the same way to flash the stock KF3 kernel, correct?
Once all this is done, will KIES recognise my phone and offer me updates when they become available or will i have to keep doing it manually?
Is it possible to backup my current FW/Kernel with Odin so that I can put those back on in case I ever need to return my phone for repairs and don't want to get any trouble with warranty?
Hi, Im kind of new to this.
I looked in a couple forums on how to flash the Official ICS rom. but I would like to know can I just pick any official ICS firmware and flash it?
my phone is:
android version- 2.3.6
Baseband version- I9100XXKI1
I know the firmware I have now is the Chinese one but would like to flash the European one. The person I bought the phone off of seemed to have flashed the Chinese firmware 2.3.6 themselves and I couldn't use Kies to update it, not sure if the phone was originally the Chinese firmware or not.
These were the two sites I was looking at to flash it:
http://forum.xda-developers.com/showthread.php?t=1075278&page=2
and
http://forum.xda-developers.com/showthread.php?t=1544487
also is there a difference between those websites for the latest ICS firmware?
any help would be appreciated. thank you!
mrpug said:
Hi, Im kind of new to this.
I looked in a couple forums on how to flash the Official ICS rom. but I would like to know can I just pick any official ICS firmware and flash it?
my phone is:
android version- 2.3.6
Baseband version- I9100XXKI1
I know the firmware I have now is the Chinese one but would like to flash the European one. The person I bought the phone off of seemed to have flashed the Chinese firmware 2.3.6 themselves and I couldn't use Kies to update it, not sure if the phone was originally the Chinese firmware or not.
Click to expand...
Click to collapse
Shouldn't matter. The reason Kies won't update it now though is probably because the original owner flashed a firmware that has a CSC that doesn't match your location/carrier. You should be able to flash any I9100 firmware you wish, as long as it is NOT an I9100G firmware.
mrpug said:
These were the two sites I was looking at to flash it:
http://forum.xda-developers.com/showthread.php?t=1075278&page=2
and
http://forum.xda-developers.com/showthread.php?t=1544487
also is there a difference between those websites for the latest ICS firmware?
any help would be appreciated. thank you!
Click to expand...
Click to collapse
Those two are pretty much the same, if you are looking at the same versions. (e.g. XWLP4) They are just hosted on different sites. I think the one on Intratech's thread may have the older bootloaders included instead of the newer ones (newer ones which prevent USB jigs from resetting the binary flash counter), and the one on Faryaab's thread probably has the newer bootloaders, but that should be the only difference.
And that difference probably doesn't matter much, as I believe with ICS, you can use Chainfire's "Triangle Away" app to reset the counter regardless of which bootloaders you have. (but I don't know that info for sure)
Thanks for the help, just flashed it and works great !
Hi,
I tried to search for this but couldn't get a result. I hope it's okay to create a new thread.
I went from stock to a Samsung ICS build with a CSC code of "SEK" (Ukraine, I think), then to Samsung ICS build for T-Mobile UK and finally yesterday I went back to the official UK XEU Samsung ICS build. Each time I have done a full wipe as per the instructions in the sticky.
Nevertheless when I use Power+VolUp+FaceButton it shows "SEK" CSC applied.
Shouldn't this have been overwritten by the XEU one? I would be very appreciative if anyone can tell me if this normal and if it will cause me any problems with upgrades etc in the future?
Hey guys!
So I've had my S3 for a few weeks now and i bought it online from Kogan and assumed that the CSC would be XSA because i chose Australia for the firmware update thing when i first booted my phone up.
However Kies shows my phone as being ORS which is the CSC for Slovakia.
I decided that I'm going to flash my phone to another CSC but I'm stuck on whether to change it to XSA (Australian) or to flash an European stock ROM. This is because Australia is horribly slow at receiving updates and most countries in Europe are the first to get them.
So since I have never flashed my S3 before, I would really appreciate it if someone could explain how and where to download the appropriate files from. Basically I want to be able to get updates quickly without having problems here in Australia. Any comment is welcome.
Thanks!
you may find this thread helpful
http://forum.xda-developers.com/showthread.php?t=1683668
Australian Galaxy S3 Thread.
samuel9kim1 said:
Hey guys!
So I've had my S3 for a few weeks now and i bought it online from Kogan and assumed that the CSC would be XSA because i chose Australia for the firmware update thing when i first booted my phone up.
However Kies shows my phone as being ORS which is the CSC for Slovakia.
I decided that I'm going to flash my phone to another CSC but I'm stuck on whether to change it to XSA (Australian) or to flash an European stock ROM. This is because Australia is horribly slow at receiving updates and most countries in Europe are the first to get them.
So since I have never flashed my S3 before, I would really appreciate it if someone could explain how and where to download the appropriate files from. Basically I want to be able to get updates quickly without having problems here in Australia. Any comment is welcome.
Thanks!
Click to expand...
Click to collapse
If you want JB now you need to flash the Polish ROM, either ICS and update or just flash one of the ODIN images. Or you can use a custom ROM based on that official release. Start with the sticky threads, then have a look in the development forum.
Ok I went to update my phone through kies and forgot that i have a different kernal than before. Kies told me i cant update through it. I assume thats cause im using a different kernal.
Here is the details from my phone.
Model - GT-I9100
Android Version - 4.0.4
Baseband Version - I9100XXLQ6
Kernal Version - 3.0.15-I9100XWLPT-CL941023
Build Number - IMM76D.XWLPT
I am locked on O2 UK i think.
I have noticed since flashing this kernal last july that my phone performance has been poor in terms of it switching off by itself and so on.
What I want to know is how can i get the original firmware back on my phone so i can update via kies. And I also want to know how to install Jelly Bean on this phone and how I go about it?
Can anyone help?
Thanks
Aaron.
Hey,
i have found out that the latest rom O2 UK has released is android 4.0.4
you can download the firmware from here
http://www.hotfile.com/dl/159884527/f4d3bd8/I9100XWLPD_I9100O2ULP7_O2U.zip.html
You will have to flash that with Odin, just unzip the file and put it in the pda section on Odin.
After that kies should be able to recognize your phone,
if you want to update to 4.0.4 from kies you will have to pick an earlier firmware from
http://www.sammobile.com/firmwares/1/?model=GT-I9100&pcode=O2U#firmware
same precedure as above for flashing it, i have not used kies since i bought my gs1 2 years ago but i believe it will work
Good luck friend!
Thanks for that dude, much appreciated
Is this a Jelly Bean ROM or just original stock ROM for O2??????????
no, just Ice Cream Sandwich, but it is stock Touchwiz. (Samsung Rom)
but the Jelly Bean update must be around the corner i guess.
if not you could allways flash a stock Samsung JellyBean rom that is open for europe,
the main difference may be a different modem and that there is no O2 apps prebaked into the Rom.
i think the one for nordic counties should work well since you are in the uk,
you can find it at
http://www.sammobile.com/firmwares/1/?model=GT-I9100&pcode=0#firmware
Thanks again man, you have been very very helpful.
Thanks
no problem mate, glad i could help you out,
and please let me know if it works with kies afterwards
What will the difference in modems do? Will there be any affect on what I can do with my phone?
What is the modem for? Internet connection i take it?
Kies doesn't let you update with the nordic counties rom at all. But it works sweet on my S2 so I'm happy.