hi im currently in process of porting a stock deodexed rom.
i have changed system files and the update script.for out i9305. at moment i am able to install the rom fine and loads up with or without wipe. i also included the ee modem.
my issue is that when the rom starts all is ok and there are no force closes however i get no network and imei shows null. to resolve this i just flash param.tar in odin and stock file and all is back to original with imei restored.
any ideas on whats causing the loss of imei number
in setting imei and baseband showbas unknown
edit whilst restoring to stock i did not have to restore imei backups so am asuming efs part is fine
Sent from my GT-I9305 using Tapatalk 2
Check 9500 partition layout and update install script. Dont rewrite the efn part.
Sent from my GT-I9305 using xda app-developers app
have done that part rom installs fine baseband is unknown
Sent from my GT-I9305 using Tapatalk 2
I think u need to Flash a baseband from our i9305 after flashing The Potter rom
but wouldnt that be the modem file iv tried flashing it on radio partition
Sent from my GT-I9305 using Tapatalk 2
right iv ported wanam lite rom to our device, the aroma works i boot up fine but baseband still unknown so annoyin
Sent from my GT-I9305 using Tapatalk 2
i am really into this thread. I opened a thread similar at the beginning but they moved it, hope this one stays in here otherwise it will get lost in the i9300 section...... this is really good lets all try get into this, like i said I am going to play around on monday when i return home, so far we got everything going exceept the Modem is not connecting to the Imei correctly, We need an experienced dev.
---------- Post added at 09:25 AM ---------- Previous post was at 09:14 AM ----------
Just think how many roms we can have if we get this going
Sent from my GT-I9305 using xda app-developers app
Try merging our system and framework so it picks it up as our xxali5 or xxali9 you have to get rid of there base and put our base instead but leave the edited files so maybe the system apps folder stays the i9300 as the apps are the same i think but change the rest into our firmware hmmmm so maybe a better idea would be to have a blank deodexed and zipaligned xxali5 rom move and overwrite our files with the edited files of the i9300 that way all our efs and imei doesnt get touched
Sent from my GT-I9305 using xda app-developers app
going to check ril today see if that sorts it
Sent from my GT-I9305 using Tapatalk 2
Great thread, wish I could contribute more.
At the moment I'm hanging to see what the more clued up guys around here work out!
added the ril files and qualcom ril files but basebands the same
also the serail number has changed on device tried reflashing modem but doesnt help
chwads2k8 said:
right iv ported wanam lite rom to our device, the aroma works i boot up fine but baseband still unknown so annoyin
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
Basically there are some intensely different changes within the services.jar, framework.jar, android-policy.jar and so forth. 4G LTE is sooo much different than the stock i9300. I am not saying it CAN'T be done. But I am saying it is going to be a complete bastard to do. Put it this way, you'd be better off looking into all of the modifications that have been done to create these ROMS and re-doing them to the i9305.
Trust me, I have looked into doing this with a "customised" build to from sources for ICS for the P7320T tablet that I had. It is the only 4G tablet released here in Australia. The closest I could find in sources for being able to make the connection was grabbing settings systemUI and the others I have listed above ^^^ from the S2 4G LTE. Then I was going to have to modify the systemUI specifically for tablet mode.
I no longer have the tablet nor the patience to want to take on anything like it again.
All I can say is good luck. Feel free to check my threads to confirm that my choices are not a conflict of motivation or lack of determination...god I can assure you that much
Just for a tip. I started today with decompiling the android-policy.jar file to see if I could enable the torch app double click home from lock screen feature....this has been done on i9300 right? Go take a look at the full guide on how to do it...go decompile 1 file that I am talking about and you will see just how different the methods are in all of the smali code. JOY!
---------- Post added at 03:34 AM ---------- Previous post was at 03:23 AM ----------
chwads2k8 said:
added the ril files and qualcom ril files but basebands the same
also the serail number has changed on device tried reflashing modem but doesnt help
Click to expand...
Click to collapse
What tools are you using to "port" this ROM to our device?
I have tools that can port ROMs in about 30-40min.
What have you got in the build.prop for this thing? Do you want to upload the ROM for me to take a look at? The least I could do is offer some help before raining on your parade lol.
Have you considered doing maybe a "splice" of the ROM. Rather than porting the full version, you could do a diff/compare of the modded ROM against it's stock counterpart. Then you migrate those changes over to your "stock i9305" base. That is going to be your best chance of doing this I reckon? also you won't be able to copy across the firmware version. That won't work. Your framework and the firmware version are going to be device specific.
The absolute best thing I can think of suggesting is to go with a known base equivilant?? Like it seems that there is a release of XXALI5 (for touchwiz at least?) on both devices. That would be where I would start first and foremost. I would port with that common version using what I described above and then migrating any further or additional functionality (developer made i.e. Wanams mods) that have been done since the XXALI5 release.
That is going to be your best bet.
Or you guys could just wait for me to release my ROM haha...subtle promotion? I think not.
btemtd said:
Try merging our system and framework so it picks it up as our xxali5 or xxali9 you have to get rid of there base and put our base instead but leave the edited files so maybe the system apps folder stays the i9300 as the apps are the same i think but change the rest into our firmware hmmmm so maybe a better idea would be to have a blank deodexed and zipaligned xxali5 rom move and overwrite our files with the edited files of the i9300 that way all our efs and imei doesnt get touched
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Exactly
I have a methodology that does this very easy. I wanted the OP to upload his work so far to save me a download. But I might just go ahead and do it anyway.
Have you guys got permissions from Wanam to use his work? I will ask on your behalf if not. He is a great contributor to this forum, I don't wish to have him offside.
What I mean is that I will go ahead and play, but I won't re-upload any test files to the forum without his consent This shouldn't be too hard
---------- Post added at 12:40 PM ---------- Previous post was at 11:53 AM ----------
Contacted Wanam. I will wait to see what he says and recommends. I have claimed I am not releasing anything of his, so this can be owned by you guys who want it. I am happy to help get the ball rolling to help yous though. I have my own dev team that I work with so that makes me kinda busy. That is why I haven't released my own ROM on here yet lol
Downloaded XXLAI5 Wanam, Downloaded XXLAI5 stock i9300, have already downloaded XXLAI5 stock i9305 and I am currently deodexeding it as we speak.
Will deodex i9300 XXALI5 next and then do a comparison to Wanams. Segregate changed files - > port to stock deodexed base = Wanam i9305 for you guys
That's if Wanam approves of course?
EDIT: Hey Mr OP can you please contact me? I cannot send you PMs? Holy smokes you've been around this place since 09!
Ok Analysis done on Wanam compared to stock XXALI5 and have all the of the files seperated and within their directory structure that had changes.
There is going to be some work needed to be done on these main files:
/system/framework/android.policy.jar
/system/framework/framework2.jar
/system/framework/services.jar
/system/app/systemUI.apk
As I expected
Now the fun n games start I will decompile all of these files and then diff them against the standard i9300 smali coding and then *attempt* (and I say that with all great intension too) to migrate the changes across into decompiled i9305 files.
I can tell this is going to be a head ache!
Otherwise though....I can honestly say that what I have got so far I know for certain will boot and you will not have baseband issues. You won't however have 15 toggle mod as it stands. Services.jar and Android policy.jar both control this feature. I see that this *IS* available as a mod already on this forum but I am not certain that the creators realise that these modifications (mentioned here) actually do need to be performed.
Lidroid-res.apk within framework will have no rights to control the toggle on the systemUI cause it won't have permissions due to conflicting signature checking. note...toggles may appear, but they won't do anything when you touch the widget toggle, it will be non-responsive.
Thanks guys
Thats what i said we should just try copying over the whole system app folder and replacing it with our deodexed rom. Try doing that as the firstt step
Sent from my GT-I9305 using xda app-developers app
btemtd said:
Thats what i said we should just try copying over the whole system app folder and replacing it with our deodexed rom. Try doing that as the firstt step
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
System app is fine, but that isn't where the changes are that make Wanams ROM. You'd have your self a standard ROM otherwise. As in no difference. Or if you just copied the system/app folder ROM would boot but systemUI would force close. You would also have no reboot menu and no USB read from the phone. That would equal disasterous....cause as we all know we don't have SD mount in recovery do we?
Fancy doing an adb push on a phone that doesn't install USB connection files?
See I wouldn't be stupid enough to do that without having at least a clockwork recovery backup lol.
It's ok. for the android.policy.jar they are identical (well for XXALI5 they are anyway) to the i9300. So simple trade in there.
Only 4 more files to go and I will have you guys a port
Wanam still has not contacted me back yet though so I we need approval before anything.
Reset scrolling caches. In framework2.jar
This took a bit of work because my notepad++ kept crashing running compare. If you guys ever have this issue, right click the executable in program files go to properties and compatibility and then check the boxes for:
- disable visual themes
- disable desktop composition
- disable high dpi scaling.
Apply.
No more crashing. Windows 7 aero apparently doesn't like the compare dll?
Anyway not related. I am back on track. last jar file and then it should be ready to package up and it will be the same as Wanam ROM XXALI5
Got approval from Wanam. Just about to test flash now. Will upload it here if everything works out
Well, I had a few mishaps with my own device. Namely no root access and also lost hardware ID...meaning no Android Market. This all happened sometime during my lengthy list of modifications so I was not sure where. That mean flash back to stock and restore my data bit by bit until I was set up again. This take for EVER!
So yeah no real feedback from anyone in here so have decided to finish off my own ROM instead. XXALI9 (newer) and a heap more mods than stock Wanam. So far so good.
I can upload what work I did on getting Wanam's up and running (I have not flashed it yet) but will wait till someone actually wants before I go ahead and do that.
Thanks guys
James
Related
*** This thread is now outdated ***
Please follow this link for a much better solution - Also, be sure to hit the Thanks! button to show your support for DizzyDen's excellent work!
********************************************************************************
I have removed all the files from this post and I encourage everyone to migrate to DizzyDen's superior solution. If for some reason you are unable to use Dizzy's tool you can PM DizzyDen or myself (Martian21) and one of us should be able to get you want you need.
********************************************************************************
[Original Thread]
I have seen several threads regarding this topic and thought I'd try to consolidate as much as I can in one place.
Credit for the original IMEI work goes to mthe0ry His original thread is here.
Because the NOOK Color is not a phone it does not have an IMEI number. This is why some apps that check for an IMEI number do not work on the NOOK.
Thanks to the work of mthe0ry and now DizzyDen it is possible to modify the framework.jar file in order to create a fake IMEI number on the NOOK Color. Doing so will allow programs such as Swype Beta, the free version of the XDA app, HBO GO, and the Xfinity app to work on the NOOK Color.
Unfortunately you need to have a framework.jar file that matches the ROM you are running as changes to the framework between ROMs can (and probably will) cause problems.
[See DizzyDen's thread for the IMEI generator tool]
*** This is mostly obsolete now that Dizzy's tool handles replacing the framework.jar file and backs up your original file - but I will leave it here just in case it is still useful to someone. ***
Installation:
You will need a file manager with Root access such as Root Explorer.
Download the framework.jar file for your Rom.
Unzip the file and transfer the framework.jar file to your NOOK Color.
Navigate to /System/framework using Root Explorer.
Mount the /System/framework folder R/W.
Rename the original framework.jar to framework.jar.bak.
Using Root Explorer, copy the new framwork.jar file.
Paste the modified framework.jar into /System/framework.
Long press the newly copied framework.jar and select "Permissions".
Change the permissions to match framework.jar.bak [rw-r--r--].
Mount the /System/framework folder R/O.
I recommend you reboot your NOOK although resetting the launcher may be enough.
For those that used my original files or the ones from mthe0ry, the original IMEI used in those files is "12-34567-89012-45". If you wish to continue using this IMEI number [NOT RECOMMENDED] you can manually enter it into Dizzy's tool.
Martian21
Request pls
I know that nightly 78 was the last nightly that runs on .29 kernel all the new nightlys 80,82,83 and 84 need uboot 1.2 and .32 kernel. I have read that some people have been experiencing problems on these builts. Also being that .32 kernel is still label beta i would like to ask you if you could please make a framework for nightly 78. I have attached the framework file from my nightly 78. Thank you
Finally was able to reboot after copying framework82. Was able to sign in but have yet to play a movie. I get stuck in the spinning circle.
Sent from my Vision using XDA Premium App
MACLUIS1 said:
Finally was able to reboot after copying framework82. Was able to sign in but have yet to play a movie. I get stuck in the spinning circle.
Sent from my Vision using XDA Premium App
Click to expand...
Click to collapse
I did a total wipe, stock 1.2 install, then a second total wipe before n82. I then added the modded framework and HBO GO worked really well! But, after adding Dal's 5/13 OC, I then got the spinning circle problem you describe.
I tried re-flashing just n83 to fix it (without Dal's OC), and re-installing the modded framework, but the spinning circle problem remains.
I can't say for sure that the OC kernel broke it -- it could be one of a dozen apps I installed? -- but it's certainly the leading culprit in my case. The 5/13 OC kernel also appeared to break a few of my other apps as well (360 Live failed too, but started working again after I returned to vanilla n83).
I'm going to start the entire process over again tonight to try and narrow down the problem...
I have the 5/13 OC installed but HBO GO is now working on my Nook. Just need to uninstall and reinstall HBO GO. Worked like a charm for me.
Sent from my Vision using XDA Premium App
MACLUIS1 said:
I have the 5/13 OC installed but HBO GO is now working on my Nook. Just need to uninstall and reinstall HBO GO. Worked like a charm for me.
Sent from my Vision using XDA Premium App
Click to expand...
Click to collapse
Didn't work for me -- still stuck on spinning circle after intro clip plays.
I used TiBu to wipe data, uninstall, then install app. Did you reboot in between, or take any other steps?
martian21 said:
I am using the same IMEI of "12-34567-89012-45" that mthe0ry used.
Click to expand...
Click to collapse
So every one gets the same IMEI?
We are going to fix this in CM soon. Please don't break every other program that uses IMEI to identify a UNIQUE device! I suggestion that no-one uses this. You are really playing with fire here.
nemith said:
So every one gets the same IMEI?
We are going to fix this in CM soon. Please don't break every other program that uses IMEI to identify a UNIQUE device! I suggestion that no-one uses this. You are really playing with fire here.
Click to expand...
Click to collapse
I do appreciate your warning (and, as always, all your hard work), but Dal came out and stated plainly that an IMEI solution would not get added to cm7 builds, so the rest of us took his word for it and had to solve the problem some other way.
Now, if you're saying that the solution WILL be built into one of the next few nightlies -- with unique IMEI's -- then that's fantastic!!
However, without it, there's currently no other way to run HBO GO, Swype, etc -- unless we compile our own framework.jar... which isn't an option for some of us noobs.
Has work already begun on a better solution?
paleh0rse said:
I do appreciate your warning (and, as always, all your hard work), but Dal came out and stated plainly that an IMEI solution would not get added to cm7 builds, so the rest of us took his word for it and had to solve the problem some other way.
Now, if you're saying that the solution WILL be built into one of the next few nightlies -- with unique IMEI's -- then that's fantastic!!
However, without it, there's currently no other way to run HBO GO, Swype, etc -- unless we compile our own framework.jar... which isn't an option for some of us noobs.
Has work already begun on a better solution?
Click to expand...
Click to collapse
I meant the static IMEI hack as presented in this thread. This hack will not be added to CM7.
We are working on a real solution as we speak.
dalingrin said:
I meant the static IMEI hack as presented in this thread. This hack will not be added to CM7.
We are working on a real solution as we speak.
Click to expand...
Click to collapse
You're a good man, thank you!
dalingrin said:
I meant the static IMEI hack as presented in this thread. This hack will not be added to CM7.
We are working on a real solution as we speak.
Click to expand...
Click to collapse
This is great news!!!
I will cease and desist as soon as it it completed. Obviously the best thing would be for people to follow mthe0ry's instructions and do this themselves (it's really not that hard) using their own unique IMEI number. That said I'm happy to continue the "hack" method for those who don't wish to do it themselves.
Yes, having multiple devices with the same IMEI could become problematic but so far it's worked for the apps people want. I do appreciate the warning as I probably wasn't as clear about the "hack" nature of this in the OP as I should have been.
Martian21
jzibit17 said:
I know that nightly 78 was the last nightly that runs on .29 kernel all the new nightlys 80,82,83 and 84 need uboot 1.2 and .32 kernel. I have read that some people have been experiencing problems on these builts. Also being that .32 kernel is still label beta i would like to ask you if you could please make a framework for nightly 78. I have attached the framework file from my nightly 78. Thank you
Click to expand...
Click to collapse
Attached:
enjoy
slide it
please disregard below. in reading the thread better I can see it's not for swype at all but for setting the nook up with an IMEI.
I don't mean to be rude, but why not just use slide-it? I'm cognisant of the simplicity of swype as I use it daily on my Galaxy S, but slide-it is nearly as good and works without fault on the nook (rooted stock and CM7) without any mods.
smiley1960 said:
please disregard below. in reading the thread better I can see it's not for swype at all but for setting the nook up with an IMEI.
I don't mean to be rude, but why not just use slide-it? I'm cognisant of the simplicity of swype as I use it daily on my Galaxy S, but slide-it is nearly as good and works without fault on the nook (rooted stock and CM7) without any mods.
Click to expand...
Click to collapse
Many of us use this hack for HBO GO, not just Swype...
First zip file is for which Rom?
Sent from my NookColor using Tapatalk
RASTAVIPER said:
First zip file is for which Rom?
Click to expand...
Click to collapse
Opps - Typo. It is for CM7 Stable 7.03
I added a note to the first post. I'll try to fix the file name when I get home tonight. I'm sure there will be 1 or two more nightly builds as well.
paleh0rse said:
Many of us use this hack for HBO GO, not just Swype...
Click to expand...
Click to collapse
It's also needed for a number of Gameloft titles.
Rodney
Concerns about unique devices make me wonder... I have a broken HTC Kaiser sitting on a shelf above my desk. It will never again be a functional device, but yet it has it's own unique IMEI.
Does the IMEI alone tell apps anything about what sort of device belongs to the number? If not, then it seems that I could use the IMEI from that Kaiser or the broken G1 I have.
It doesn't seem like these apps know anything about the device from the IMEI alone, given that people have been implementing this fix with no repercussions. That means apps probably don't check any hypothetical IMEI-device info against what's recorded in the build.prop, so this seems like a safe, workable solution for those of us with defective devices on our shelves.
Is there a way to make this work on a ManualNootered nook with 1.2, or does it only work if you have a custom rom.
Thanks
integrate in CM7
could you not ask the maintainers of CyanogenMod to integrate this in the future nightlies?
they would probably welcome the added functionality
*Updated to Sensation fingerprint*
Can't download or even play certain apps or games such as Gameloft's N.O.V.A.3?
Follow the below steps to make your HTC ETO 4G LTE disguise itself as a HTC Sensation to get the best of the Google Play Store.
Tested working on stock ROM with Root and SU.
Modern Combat 3, N.O.V.A. 3 tested to work perfectly. All other Gameloft games should work and show up in market.
Please note, if you have a custom ROM, you probably do not want to use this. It will overwrite your ROM creator's settings. It will probably work, but it will take away certain features of their build.prop tweaks.
Users are saying that this kills Google Wallet. I cannot confirm this since I don't use it. Use at your own risk. Please update us if it does or not.
You must be rooted!
BACKUP YOUR CURRENT BUILD.PROP
1. Clear Google Play Store Data (Settings, Apps, All, Google Play Store, Clear Data)
2. Download the build.prop I have attached at the end of this post.
3. Unzip it
4. Use a file explorer such as ES File Explorer and navigate up to /system
5. Copy and paste it over your current build.prop in/system
6. Reboot phone
Clear as mud
*Edit*
Removed manual way to update (Hardcore DIY'ers can Google it)
Updated build.prop to HTC Sensation (pyramid). Apps were showing up before with the Galaxy SII build.prop changes, but downloaded files weren't compatible with our phone. Sensation makes for a better fingerprint.
Thanks for this! Only one thing:
People need to understand that if they're not on the stock ROM (that this build.prop is based off of) that they are risking losing whatever modifications their ROM devs added into build.prop.
Different devs do different things in there....blindly replacing your ROM's build.prop is usually a bad idea.
smw6180 said:
Thanks for this! Only one thing:
People need to understand that if they're not on the stock ROM (that this build.prop is based off of) that they are risking losing whatever modifications their ROM devs added into build.prop.
Different devs do different things in there....blindly replacing your ROM's build.prop is usually a bad idea.
Click to expand...
Click to collapse
True... which is why it's important to manually make the change to the build.prop on your rom. Takes a little work, but worth it.
If you follow these instructions, you cant mess it up.
smw6180 said:
Thanks for this! Only one thing:
People need to understand that if they're not on the stock ROM (that this build.prop is based off of) that they are risking losing whatever modifications their ROM devs added into build.prop.
Different devs do different things in there....blindly replacing your ROM's build.prop is usually a bad idea.
Click to expand...
Click to collapse
Meaning such as CM and MIUI and such? Anything based off of 1.13 or even 1.12 is OK right? Im just curious about that, thats all. Ive been wanting to plat Tigers Woods, and for a $5.24 game, im pretty pissed they wont even remburse me for that ****. Thannks brotha. Thanks to the OP as well
reverepats said:
Meaning such as CM and MIUI and such? Anything based off of 1.13 or even 1.12 is OK right? Im just curious about that, thats all. Ive been wanting to plat Tigers Woods, and for a $5.24 game, im pretty pissed they wont even remburse me for that ****. Thannks brotha. Thanks to the OP as well
Click to expand...
Click to collapse
Meaning anything that's not stock. Viper, PokeROM, Fresh, whatever.
Each developer tends to make their own build.prop edits. If you just make the changes to the stock build.prop that the OP attached and you're running any custom ROM you're overwriting whatever they may have done. Unless your Dev puts the change into his/her ROM, or someone makes a flashable zip for you, for your ROM, just grabbing a random build.prop and using it because it has the edits you want is a bad idea.
I'm using Joelz9614 rom just manually edit. A safe rule is never paste over the prop when you can do the edits yourself if you're not sure if it's modded
Sent from my GT-P6210 using Tapatalk 2
Oh and great post op. You're a life saver!
Sent from my GT-P6210 using Tapatalk 2
Kidromulous said:
I'm using Joelz9614 rom just manually edit. A safe rule is never paste over the prop when you can do the edits yourself if you're not sure if it's modded
Sent from my GT-P6210 using Tapatalk 2
Click to expand...
Click to collapse
Exactly.
One more note guys this will kill google wallet mine was still stuck so not sure about those already set up but changing your device to a non wallet device means no wallet. Just thought I'd add this though we are bound to see people ask about it anyway. Perhaps that can be added to the op
Sent from my GT-P6210 using Tapatalk 2
so i screwed up! i edit manually didnt work maybe i mis spelled.. and then thought i could just flash that build prop posted...and i had just flashed FRESH 5.0 and just kinda now read that i should have changed the build prop with that rom untill the developer had that built in.. any ideas what the hell i can do now?
BAttitude7689 said:
so i screwed up! i edit manually didnt work maybe i mis spelled.. and then thought i could just flash that build prop posted...and i had just flashed FRESH 5.0 and just kinda now read that i should have changed the build prop with that rom untill the developer had that built in.. any ideas what the hell i can do now?
Click to expand...
Click to collapse
OPen the zip for the Fresh ROM, go to /system and pull out build.prop. Push that to your phone, and change the permissions.
Or, flash Fresh over your current installation without wiping.
You could push the original build.prop to your phone from the Rom you are using or reflash
Not Sent
Kidromulous said:
One more note guys this will kill google wallet mine was still stuck so not sure about those already set up but changing your device to a non wallet device means no wallet. Just thought I'd add this though we are bound to see people ask about it anyway. Perhaps that can be added to the op
Sent from my GT-P6210 using Tapatalk 2
Click to expand...
Click to collapse
Won't Gameloft eventually make the market change so that the One-X variants are downloading the HD versions? I would only do this if you have to have it now...
BAttitude7689 said:
so i screwed up! i edit manually didnt work maybe i mis spelled.. and then thought i could just flash that build prop posted...and i had just flashed FRESH 5.0 and just kinda now read that i should have changed the build prop with that rom untill the developer had that built in.. any ideas what the hell i can do now?
Click to expand...
Click to collapse
You could reflash your ROM or ask the dev for this build.prop file to paste over your corrupted one.
it was a damn brick and i could even get to recovery screen... i did volume down and power and the bottom buttons would flash and then finally stopped i then press volume down and power and magiclly i got to the bootloader then the recovery and reflasheed
You removed the changes that needed to be made manually? I applied the Samsung changes and now would like to apply the new sensation changes. I guess I'll dig through the build.prop and check which lines are different
To the OP, why would you remove the changes to the file that can easily be done manually??? It's a simple mod that can be done. Users NOT in the know will replace their their file with yours, only to end up with a mess because they are on a different rom that has somewhat different parameters than what's in your attachment.
gpz1100 said:
To the OP, why would you remove the changes to the file that can easily be done manually??? It's a simple mod that can be done. Users NOT in the know will replace their their file with yours, only to end up with a mess because they are on a different rom that has somewhat different parameters than what's in your attachment.
Click to expand...
Click to collapse
Well I hope these heed his warning or perhaps the thread and they should be ok.
Sent from my EVO using Tapatalk 2
Deleted
fldash said:
Won't Gameloft eventually make the market change so that the One-X variants are downloading the HD versions? I would only do this if you have to have it now...
Click to expand...
Click to collapse
I have nova 3 now so I needed to do it before this it didn't work on my phone
Sent from my EVO using Tapatalk 2
I installed the s voice from S4 system dump last week and it worked great but after the easter holiday , S voice keeps saying that no network , anyone has the same problem and how could i fix it.
Sent from my GT-I9300 using xda app-developers app
Me too .my original and new one don't work now
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
+1
+1
i reverted back to the original s voice (version 10) packaged with S3 roms.
it is working fine.
I have an idea but nothing conclusive.
I think the server is filtering to only allow s4's to be used with version 11.
I heard similar restrictions for siri where initially only the 4s were able to use it unless hacked to be used with other older gen devices.
Any thoughts?
Yeah it's not working anymore for me :/
Had anyone thought of editing the build prop and changing the model number? I'd reckon that would fix it.
Sent from my GT-N7105T using Tapatalk 2
I wish there was a way to do it without rooting my phone.
Sent from my Nexus 10 using Tapatalk HD
Seems like the same exact thing happened with the first S-Voice
Heres an article talking about it and how to fix it:
http://www.theandroidsoul.com/fix-network-error-problem-s-voice-app-galaxy-s3/
Sounds like we need to do some tweaking in the APK, unfortunately I do not have those skills. Maybe some dev will be interested in it and help us out, but I'm sure they have other things to do that are a little more important
Jelly Bean??
The link that you provided states that is good for 4.0 ICS. What about later versions, like 4.1.2, Jelly Bean? Does it work for that version also?
Thanks.
s4 s voice 100% working
find zip here and flesh via cmw link
http://d-h.st/sSj
thanks 4 zoot1 for making zip
sam77744 said:
find zip here and flesh via cmw link
http://d-h.st/sSj
thanks 4 zoot1 for making zip
Click to expand...
Click to collapse
It didn't work for me after flashing the whole zip (fc when opening weather card). So I restored all files to default and simply installed just S-Voice_Android_phone_J.apk (as a normal app), now it works great. Btw i'm on Omega v43.2 (XXEMC2, 4.1.2).
Here is the extracted S-Voice...http://forum.xda-developers.com/showthread.php?t=2208996
MMWolverine said:
It didn't work for me after flashing the whole zip (fc when opening weather card). So I restored all files to default and simply installed just S-Voice_Android_phone_J.apk (as a normal app), now it works great. Btw i'm on Omega v43.2 (XXEMC2, 4.1.2).
Here is the extracted S-Voice...http://forum.xda-developers.com/showthread.php?t=2208996
Click to expand...
Click to collapse
brother its working 100% but u flesh it after delate svoice 10 or when u flash rom do not select s voice.
---------- Post added at 09:35 PM ---------- Previous post was at 09:00 PM ----------
sam77744 said:
brother its working 100% but u flesh it after delate svoice 10 or when u flash rom do not select s voice.
Click to expand...
Click to collapse
S-Voice_Android_phone_J.apk its not working nework errar. cmw zip is 100 working.
I got the network error in another s4 s-voice version, after I updated the rom. As I said in my previous post, the cwm flashable zip didn't work for me, installing only the apk did.
It's best that users on different roms try it out for themselves and see what works.
MMWolverine said:
It didn't work for me after flashing the whole zip (fc when opening weather card). So I restored all files to default and simply installed just S-Voice_Android_phone_J.apk (as a normal app), now it works great. Btw i'm on Omega v43.2 (XXEMC2, 4.1.2).
Here is the extracted S-Voice...http://forum.xda-developers.com/showthread.php?t=2208996
Click to expand...
Click to collapse
Thank you so much, it works by installing the apk file in the zip.
Does this work for anyone currently.
I installed the apk both in the system/apps folder and normally , and both times i get a no network connection.
have they done anything more to prevent anyone but s4 users?
No network connection for S-Voice for galaxy S3
I found out that by uninstalling the update that the apk has recentlly aquired it will fix the network issue since I could not uninstall the program it self. It is a sure fire fix.:fingers-crossed::fingers-crossed:
Touchwiz 4.3
This is Stock WITHOUT any added Note3 features
Download Link
R.A.H.TW_4.3_11-27-13-1908.zip - 1.09 GB
First Boot can take a while be patient.
Known TWRP issue ( and possible CWM ) attempting to preform a restore of TW4.3 may cause bootloop
Bugs
WiFi bug (see wifi patch section)
Signal bar does not show accurate signal (if any)
Possible root lost on first boot (see Root section)
WIFI PATCH FIX
Here's how to get Wifi working. Do this after installing the ROM. Thanks to seanzscreams for the fix and stvn1337 for posting the info. What this fix does is adds the paramaters needed for Wifi to work on TouchWiz 4.3 based ROMs while still allowing us to flash to other ROMs outside of the TouchWiz 4.3 stuff. Be forwarded that these steps do need to be followed pretty much dot on especially when it comes to apply the patch. Deviating on that part might cause some major issues including bricking your device. I will not be held liable if that were to happen or will XDA. You've been pretty well warned. Don't worry this is a pretty easy patch to apply so don't worry too much about it. Smile, eat a Kit Kat, and just do what I tell you. In no time you'll have working Wifi on this ROM.
FILES
4.3param_tz.zip - 690.83 KB
INSTRUCTONS
1 - Download Odin3 and the WiFi Fix files.
2 - Extract Odin3 and the WiFi Fix files. For the WiFi fix you just need to extract 4.3param_tz.zip so the 4.3param_tz.tar file is ready for us with Odin3.
3 - Download and install Samsung drivers if you don't have them already.
4 - Turn off Note 2. After turned off press Volume Down + Home Button + Power to boot into the bootloader.
5 - Plug Note 2 into PC with Odin3 running.
6 - Once your PC has detected and installed drivers your Note 2 should show up in Odin3.
7 - Load the Wifi fix file (should be named 4.3param_tz.tar) into the PDA option in Odin3.
8 - Hit the Start button. It'll only take seconds for the file to do its magic then your Note 2 will reboot into recovery.
9 - Reboot out of recovery.
10 - ????
11 - Wifi should work now!
12 - ????????
13 - PROFIT!
Click to expand...
Click to collapse
Lost root?
Flash SuperSU from this thread
[2013.11.26] SuperSU v1.80 by Chainfire
Features And Mods
Wanam Xposed
Credit
wesamothman for the base and passing ideas back and forth
lacoursiere also for passing ideas back and forth
stvn1337 for finding the sec-ril from Spint Note2
Nice!!!!
Sent from my SCH-I605 using xda app-developers app
Sweet...if u need help let me know...I'm willing to do what I can to help even test...
Nice I'll keep an eye on this thread.
Why haven't people been working on 4.3? I wish I knew how to
Sent from my SCH-I605 using xda app-developers app
m0j09987 said:
Why haven't people been working on 4.3? I wish I knew how to
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
What does your comment mean?...
4.3 aosp is out...
4.3 TW JUST LEAKED WITHIN 24hrs ago...
And I guess im NOT working on 4.3??? Wtf man
No offense bro. U stated that your not working on it and its for Dev. That's all I'm saying . I mean if you got it then by all mean mad props to u and looking forward to using your work.
Sent from my SCH-I605 using xda app-developers app
m0j09987 said:
No offense bro. U stated that your not working on it and its for Dev. That's all I'm saying . I mean if you got it then by all mean mad props to u and looking forward to using your work.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Please tell me where I said im not working on it? You know cause the port was done all by itself...
I mean no disrespect but its comments like yours why less and less people release crap, why not just get it working for myself and thats it... why do other people need to use devs hard work and not give a hoot. Then make threads about where did all the TW devs go? I havent seen what I deem as enough updates or some other ungrateful soundsing posts
Gentleman please stay OT and inline. No disrespect allowed.
Thank you for your cooperation.
EFM
runandhide05 I just want to say thanks for all the hard work you have shared with us so far on bringing the Touchwiz 4.3 leak to our Verizon Note 2.
AngryManMLS said:
runandhide05 I just want to say thanks for all the hard work you have shared with us so far on bringing the Touchwiz 4.3 leak to our Verizon Note 2.
Click to expand...
Click to collapse
Thanks for the initial push, whether it becomes anything or not. You're helping to keep the note 2 alive.
Runandhide. I'm sorry about what I said. I didn't mean it the way you took it. I thank you for what u got to our phone.
Sent from my SCH-I605 using xda app-developers app
can't wait to try this. I'm tempted to flash and make a nan so when it's in alpha/beta stage i can just flash that over it lol
OP, thanks for making this available to DEVs. So sorry that some people just don't get it or appreciate it!
Nice!! Thanks for giving me/us hope on seeing a TW 4.3 ROM before Big Red gets around to releasing one :beer:
Sent from my SCH-I605 using xda app-developers app
@runandhide05
Thank you man. Really appreciate what you're doing.
Dave
This is good news. Thanks for sharing.
Sent from my SCH-I605 using Tapatalk 4
@runandhide05 I am in the same boat as you I have everything working except data/signal.. I have ported from n7100 before but the process seems to be different in this case..4.3. I am still trying to get it corrected with different methods. Can you tell me what you have done so far so we can compare? I started with stock base 4.3 N7100.. Added our csc files, build.prop edits for cdma and a couple lib files and our modem. When I boot it boots fine.. In mobile networks I have option to select cdma/lte but still no signal.. We our missing something that i cant seem to find. Some files that we usually port over have been changed or are non existant in 4.3... and btw what kernel are you using I think this maybe the source of our problem..I can only seem to flash it and get it to boot with the 4.3 stock kernel and I am not skilled or have enough knowledge to know whether kernels have anything to do with lte capabilities.. I would assume so.. And if thats the case we will have to wait for the n7105 leak to get kernel source..
lacoursiere18 said:
@runandhide05 I am in the same boat as you I have everything working except data/signal.. I have ported from n7100 before but the process seems to be different in this case..4.3. I am still trying to get it corrected with different methods. Can you tell me what you have done so far so we can compare? I started with stock base 4.3 N7100.. Added our csc files, build.prop edits for cdma and a couple lib files and our modem. When I boot it boots fine.. In mobile networks I have option to select cdma/lte but still no signal.. We our missing something that i cant seem to find. Some files that we usually port over have been changed or are non existant in 4.3... and btw what kernel are you using I think this maybe the source of our problem..I can only seem to flash it and get it to boot with the 4.3 stock kernel and I am not skilled or have enough knowledge to know whether kernels have anything to do with lte capabilities.. I would assume so.. And if thats the case we will have to wait for the n7105 leak to get kernel source..
Click to expand...
Click to collapse
Its looking like we will need to wait for a n7105 for the lte.
Using stock kernel. All others fail to boot.
runandhide05 said:
Its looking like we will need to wait for a n7105 for the lte.
Using stock kernel. All others fail to boot.
Click to expand...
Click to collapse
I do have a friend that I have developed a rom with said that he got it booted and signal.. SO let me talk to him today and maybe we can crack this thing.. I was thinking maybe n7105 saber kernel..I will try and let you know.. I have wifi working as well as gps..
This is my first ROM for this device, the plan is to modify the stock ROM like I did with my ROM for the TAB 3.
ChangeLog:
UPDATED ON 5/2/18
-changed notification layout
UPDATED ON 4/22/18
-added screenshot to power menu
-added 5 way reboot to power menu
UPDATED ON 4/17/18
-enabled app ops
-added system app remover (venkat) to developer settings
-added boot on/off sounds
-changed bootanimation
-updated busybox
*More mods coming soon!*
Download(s):
-Full ROM- (flash with TWRP)
https://drive.google.com/open?id=1tsnPB1RqxLhIbg6-JRVrrSfSBUQau9eN
-TWRP2.8.7.0- (built by Blazer64)
[Flash with Odin]
https://drive.google.com/open?id=1Y8lK-LOKqBBDt4MXqFikLvb98uAZlBbK
[Flash with Flashify or dd command mmcblk0p17]
https://drive.google.com/open?id=1cs4fdQXy9AamwYxSmbljY-hROHmFhd7j
Hey RealWelder,
thanks so much for working on this device, I coudn't believe when I saw someone was posting about it so recently. I am still desperately searching for a SM-G360P ROM without carrier lock. Could you tell me which Stock-Rom (Boost/Sprint/Virgin etc.) this ROM is based on? Do you think it's possible to deactivate the carrier lock in a ROM at all?
Also: Have you found any custom roms for the 360P or tweaked some to work on the device?
I installed your modded ROM and really like the modifications you did. Great job! Now, if the phone would accept my SIM-Card instead of showing "Invalid SIM", I'd be totally satisfied
Thanks again & keep up the good work!
jaytheman said:
Hey RealWelder,
thanks so much for working on this device, I coudn't believe when I saw someone was posting about it so recently. I am still desperately searching for a SM-G360P ROM without carrier lock. Could you tell me which Stock-Rom (Boost/Sprint/Virgin etc.) this ROM is based on? Do you think it's possible to deactivate the carrier lock in a ROM at all?
Also: Have you found any custom roms for the 360P or tweaked some to work on the device?
I installed your modded ROM and really like the modifications you did. Great job! Now, if the phone would accept my SIM-Card instead of showing "Invalid SIM", I'd be totally satisfied
Thanks again & keep up the good work!
Click to expand...
Click to collapse
I'm not too sure about the carrier lock, I would think with a SIM it would work on any GSM network, but that's not always the case. This is the Boost Variant and the firmware is the latest, G360PVPS2APE2.
So far I've not found anything other than modified stock ROMs for the device, but we have everything we need besides someone who can actually build it from source. At one time Blazer64 had CM11 on his Core Prime, (his was s820l through Straight Talk) but I think the project was abandoned. I can modify, but building from source isn't even possible with my current dinosaur of a PC. Lol
Sent from my SM-G360P using Tapatalk
RealWelder said:
I'm not too sure about the carrier lock, I would think with a SIM it would work on any GSM network, but that's not always the case. This is the Boost Variant and the firmware is the latest, G360PVPS2APE2.
So far I've not found anything other than modified stock ROMs for the device, but we have everything we need besides someone who can actually build it from source. At one time Blazer64 had CM11 on his Core Prime, (his was s820l through Straight Talk) but I think the project was abandoned. I can modify, but building from source isn't even possible with my current dinosaur of a PC. Lol
Sent from my SM-G360P using Tapatalk
Click to expand...
Click to collapse
I'm not 100% sure my SIM-card isn't detected because of a carrier-lock. I brought the phone from the US and now use it in Germany, so that may be why...
Having Lineage on my SM-G360P would be a dream, maybe some day a dev feels up to the task. I'd even invest some money, if somebody was willing. It's not even because I particularly love the phone (I actually have a working Huawei phone), but simply because I don't feel like throwing it away. Damn all these manufacturers for abandoning their models so shortly after release.
Do you perhaps know how one would get into ROM-building and Modding? Are there any decent resources you know of?
jaytheman said:
I'm not 100% sure my SIM-card isn't detected because of a carrier-lock. I brought the phone from the US and now use it in Germany, so that may be why...
Having Lineage on my SM-G360P would be a dream, maybe some day a dev feels up to the task. I'd even invest some money, if somebody was willing. It's not even because I particularly love the phone (I actually have a working Huawei phone), but simply because I don't feel like throwing it away. Damn all these manufacturers for abandoning their models so shortly after release.
Do you perhaps know how one would get into ROM-building and Modding? Are there any decent resources you know of?
Click to expand...
Click to collapse
Shoot me a PM and when I have time I'll give you the tools I use and point you in the right direction.
Sent from my SM-G360P using Tapatalk
Holy Moly!
Holy moly! I can't believe that people still remember this phone! Haha! I have the same phone with my own Modified Stock Rom. Would you guys like to take a look? More so, I would like to ask you that how did you get the RealWelder Rom Controls?? :laugh: :good:
---------- Post added at 03:50 PM ---------- Previous post was at 02:55 PM ----------
GrapeJuice123 said:
Holy moly! I can't believe that people still remember this phone! Haha! I have the same phone with my own Modified Stock Rom. Would you guys like to take a look? More so, I would like to ask you that how did you get the RealWelder Rom Controls?? :laugh: :good:
Click to expand...
Click to collapse
Just realized that you made it yourself (RealWelder ROM Controls) , awwesome man! Is it possible that I can do something like that on my phone?
GrapeJuice123 said:
Holy moly! I can't believe that people still remember this phone! Haha! I have the same phone with my own Modified Stock Rom. Would you guys like to take a look? More so, I would like to ask you that how did you get the RealWelder Rom Controls?? [emoji23] :good:
---------- Post added at 03:50 PM ---------- Previous post was at 02:55 PM ----------
Just realized that you made it yourself (RealWelder ROM Controls) , awwesome man! Is it possible that I can do something like that on my phone?
Click to expand...
Click to collapse
Yes, check out @tdunham Unified TouchWiz Guides and Mods thread. There you will find (near the bottom of the 1st page) a link to Custom Settings by @ficeto. You can download it and use it instead of ROM Control (which is for 5.0+) to use the mods. Also @venkat kamesh has a signing tool that I used to resign the Custom Settings app after I modified it.
Sent from my SM-G360P using Tapatalk
RealWelder said:
Yes, check out @tdunham Unified TouchWiz Guides and Mods thread. There you will find (near the bottom of the 1st page) a link to Custom Settings by @ficeto. You can download it and use it instead of ROM Control (which is for 5.0+) to use the mods. Also @venkat kamesh has a signing tool that I used to resign the Custom Settings app after I modified it.
Click to expand...
Click to collapse
Alrighty, I looked through the list (holy cow that's crap ton of customization, suck on that Apple!) And I couldn't find where I could make my phone's notification area look more modern, just like you have on your modified ROM. Do you know where can I find that? Thanks!
GrapeJuice123 said:
Alrighty, I looked through the list (holy cow that's crap ton of customization, suck on that Apple!) And I couldn't find where I could make my phone's notification area look more modern, just like you have on your modified ROM. Do you know where can I find that? Thanks!
Click to expand...
Click to collapse
I did that on my own, you can decompile my SystemUI_ESS.apk with apktool and check it out. Most of the changes are in Notification_Header.xml, Status_Bar.xml, and Status_Bar_Expanded.xml as well as /values/Colors.xml and /values/Drawables.xml.
Make sure you search through all of the various values folders because there are different Colors.xml and Drawables.xml for each screen size. Same with /layout which is where the other 3 files are. (mdpi, hdpi, etc.)
Sent from my SM-G360P using Tapatalk
Excellent work with this rom. I was finally able to get xposed working on this phone after flashing your rom. And the twrp for this rom works great. I like the bootanimation you made, I tried to change it and was unable to. Any suggestions? I tried putting bak at the end of every file and even added my zip to the folder with no avail. Help me please @RealWelder And one last thing, I get this annoying pop-up that my software has been updated every time the phone boots and I can't get rid of it. The xposed apps notify clean and receiver stop are useless for it. I tried disabling system software update apps with root uninstaller pro and still nothing.
elwhiteboy01 said:
Excellent work with this rom. I was finally able to get xposed working on this phone after flashing your rom. And the twrp for this rom works great. I like the bootanimation you made, I tried to change it and was unable to. Any suggestions? I tried putting bak at the end of every file and even added my zip to the folder with no avail. Help me please @RealWelder And one last thing, I get this annoying pop-up that my software has been updated every time the phone boots and I can't get rid of it. The xposed apps notify clean and receiver stop are useless for it. I tried disabling system software update apps with root uninstaller pro and still nothing.
Click to expand...
Click to collapse
The bootanimation should be pretty easy, just replace bootanimation.zip in /system/media/ with you own. (Or use an app like JRummy's Bootanimation app.) I'm not sure what's up with the update, unless Boost finally did one. I don't have a SIM or service on mine so I would be unable to get it currently. I'll see what I can figure out, though.
Sent from my SM-G360P using Tapatalk
RealWelder said:
The bootanimation should be pretty easy, just replace bootanimation.zip in /system/media/ with you own. (Or use an app like JRummy's Bootanimation app.) I'm not sure what's up with the update, unless Boost finally did one. I don't have a SIM or service on mine so I would be unable to get it currently. I'll see what I can figure out, though.
Click to expand...
Click to collapse
I did put my zip in system/media and even put bak at the end of every boot file. Before that I tried the Samsung boot animation app and it didn't work. Hence the reason why I tried other options. I'm going to try.again one last time. I'll let you know if I have any progress. And thanks for your response and also great rom.
elwhiteboy01 said:
I did put my zip in system/media and even put bak at the end of every boot file. Before that I tried the Samsung boot animation app and it didn't work. Hence the reason why I tried other options. I'm going to try.again one last time. I'll let you know if I have any progress. And thanks for your response and also great rom.
Click to expand...
Click to collapse
Hey just don't worry about the boot animation. Once I got Xposed and all the Xposed apps up and running, I did a backup. Good thing too, messing with the boot animations made the phone to work real slow. I said to hell with it and just did a restore in twrp. As much as I would want this phone to boot like my Samsung tab 4 with the Stargate animation, it doesn't seem worth the effort. So don't trouble yourself messing with it @RealWelder. I appreciate what you did with this rom. Changing the architecture to an arm7 I believe. Well anyways, Xposed accepts it now. I can't thank you enough!
Hey, I have been trying to figure out how to edit my ROM on my computer, and I can't seem to do it? Can you help me out or at least give me tips?
GrapeJuice123 said:
Hey, I have been trying to figure out how to edit my ROM on my computer, and I can't seem to do it? Can you help me out or at least give me tips?
Click to expand...
Click to collapse
You're gonna need some tools. Apktool.jar or other program which uses apktool to decompile and recompile apks. It's also a good idea to keep newer and older versions of smali and baksmali.jar(s) because smali code has changed a bit and sometimes you have to baksmali with an older version and then smali with the newer version to convert code. Next you'll want to go check out TDunham's Ultimate TouchWiz guides and mods thread. There you will find all of the tutorials and mods.
Sent from my SM-G360P using Tapatalk
RealWelder said:
You're gonna need some tools. Apktool.jar or other program which uses apktool to decompile and recompile apks. It's also a good idea to keep newer and older versions of smali and baksmali.jar(s) because smali code has changed a bit and sometimes you have to baksmali with an older version and then smali with the newer version to convert code. Next you'll want to go check out TDunham's Ultimate TouchWiz guides and mods thread. There you will find all of the tutorials and mods.
Click to expand...
Click to collapse
Sweet! Can you link me the Apktool.jar? Sorry I have never edited ROMs before. Thanks!
---------- Post added at 09:25 PM ---------- Previous post was at 09:25 PM ----------
GrapeJuice123 said:
Sweet! Can you link me the Apktool.jar? Sorry I have never edited ROMs before. Thanks!
Click to expand...
Click to collapse
..well I have but with Gravity Box if that counts! Haha
GrapeJuice123 said:
Sweet! Can you link me the Apktool.jar? Sorry I have never edited ROMs before. Thanks!
---------- Post added at 09:25 PM ---------- Previous post was at 09:25 PM ----------
..well I have but with Gravity Box if that counts! Haha
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B3XczzpnAnvwdlFvYURXMl8tbUk/view?usp=drivesdk
Sent from my SM-G360P using Tapatalk
RealWelder said:
https://drive.google.com/file/d/0B3XczzpnAnvwdlFvYURXMl8tbUk/view?usp=drivesdk
Sent from my SM-G360P using Tapatalk
Click to expand...
Click to collapse
Ok, I have installed the zip that you gave me. Am I supposed to use the TWRP Backup that I have to edit the ROM?
---------- Post added at 08:59 PM ---------- Previous post was at 08:43 PM ----------
GrapeJuice123 said:
Ok, I have installed the zip that you gave me. Am I supposed to use the TWRP Backup that I have to edit the ROM?
Click to expand...
Click to collapse
Should I follow this link? Or is there an easier way to mod the ROM? https://forum.xda-developers.com/showthread.php?t=2195858
Thanks!
GrapeJuice123 said:
Ok, I have installed the zip that you gave me. Am I supposed to use the TWRP Backup that I have to edit the ROM?
---------- Post added at 08:59 PM ---------- Previous post was at 08:43 PM ----------
Should I follow this link? Or is there an easier way to mod the ROM? https://forum.xda-developers.com/showthread.php?t=2195858
Thanks!
Click to expand...
Click to collapse
You don't install that zip just extract it into a folder on your computer and then find a thread that explains how to use it. My instructions will help some, but it was written for a different device so the frameworks that you install be different.
Sent from my SM-G360P using Tapatalk
Hey man, I was just wondering. Can I install a custom ROM from a different phone? Like Sm-g360h? I don't care if I can make phone calls as long as the ROM works? You think it will boot loop or even worse, brick my phone?
Edit: if anything happens to my phone, I will NOT hold anyone responsible besides me. Don't worry lol