Hi everyone,
To make this short I am having an issue with ALL helly bean roms on my samsung fascinate
I continuously get the error "com.android.phone has stopped unexpectedly" after 1st flashing the ROM,
I have tried working with it to see if it would go away but every time I open a 3rd party app it would pop up.
Also I have tried deleting the phone app but it would mess up my signal bars and then I could not use the dialer (obviously)
Within clockwork recovery I have mounted everything and did a full wipe, wipe cache and wiped dalvik cache multiple times, then flashed the ROM then gapps but it has lead to the same outcome.
I am running helly bean 11/02/12 (4.1.2), stock 377mb ram, 1GHz stock clocked, devil kernel 1.8.1
How can I fix this?
Thanks.
P.S. I would had asked this in the helly bean forum but I am still a noob in XDAs eyes.
I believe others are having issues with this particular build too... try one or two older versions
What were you running prior to this update?
sent from my swagger
aokp milestone 1 / devil kernel 1.8.0
Had this same problem on a Captivate. Unfortunately, 10/23 is the last one that works properly for me.
Related
I've been using jokersax's CM9 mod for the past 3 months, and I decided to try out the CM10 mod. When i try to install it, (the 1105 update CM10) I always get the Status 7 error. Then when I try the epinter CM10, it installs, but I dont like the performance of it (glitchy at times, games and apps speed up at random times, then slow down).
What I do before trying the jokersax cm10 is:
-wipe data/factory reset
-wipe cache
-fix permissions
-wipe davik(sp?) cache
-install
and I always get Status 7 error. Does anyone know what to do?
(ps. if not, which is the best CM9 mod?)
Hi, what recovery are you using. I am thinking the dowloaded file might be corrupted. Th3 Bills roms tend to be very good and regularly updated for improvements. The are few issues with using CM9/CM10 is that they do not support fingerprint login and navigation. Secondly the Hardware Accelration is not very good so not all games work.!
im using clockwork recovery 5.0.2.0 if that answers your question. the mod i am using is Th3Bill's 1105 CM10 mod...and with the game problem, it works fine when i use CM9, but when I use CM10 is when it gets all glitchy, so would it even be worth it to try a different CM10 mod?
poojiggles7 said:
im using clockwork recovery 5.0.2.0 if that answers your question. the mod i am using is Th3Bill's 1105 CM10 mod...and with the game problem, it works fine when i use CM9, but when I use CM10 is when it gets all glitchy, so would it even be worth it to try a different CM10 mod?
Click to expand...
Click to collapse
Well all CM9/Cm10 mods have the glitchy problem. This is due to HWA drivers not completely perfected in leak and not available from NVIDIA. As much as I want to use CM9/Cm10 I am sticking with CM7 less problems and very stable builds are around especially MROM.
poojiggles7 said:
I've been using jokersax's CM9 mod for the past 3 months, and I decided to try out the CM10 mod. When i try to install it, (the 1105 update CM10) I always get the Status 7 error. Then when I try the epinter CM10, it installs, but I dont like the performance of it (glitchy at times, games and apps speed up at random times, then slow down).
What I do before trying the jokersax cm10 is:
-wipe data/factory reset
-wipe cache
-fix permissions
-wipe davik(sp?) cache
-install
and I always get Status 7 error. Does anyone know what to do?
(ps. if not, which is the best CM9 mod?)
Click to expand...
Click to collapse
There is an error on script in the last ROM, causing the "Status 7" error.
I already have fixed and posted http://forum.xda-developers.com/showpost.php?p=33812203&postcount=423
Hi, I just recently came back to this forum, pleased to find that we now have CM10 working on Amaze ! (Thank you sportsstar!)
However I did have a couple issues when installing, and seeing as how a lot of people in the CM10 thread asked to redirect questions here, I figured I make a thread.
My problem is that it seems as though no matter what I install, there is always a problem. As far as I know, I am using the basic ICS-Ruby kernel that was dumped 6+ months ago. I installed the CM10 rom using 4EXT, with no issues.
However when I installed the Gapps (gapps-jb-20130301-signed) I constantly had the Android keyboard force close on me. So instead I tried to install the JB-4.2-Gapps-signed. With these, the Android keyboard would not force close but the Google Now search app would force close everytime.
I've also tried installing the DARK GLASS 0.6 ROM by jose, but then the wifi would not turn on. (When I would try to turn it on, it would just hang saying "Turning on Wifi").
It is probably worth mentioning that I did do a full wipe everytime I installed the CM10 rom. I was sure to be very thorough. When I installed DARK GLASS 0.6 ROM, again, I did a full format of partiitions, and a wipe. Still the issues above arise.
Can someone maybe help me out as to what I'm doing wrong? Thanks!
------------------------------------------------------------------------------------------------------------------------------------------------------
EDIT: I just looked at my phone info, and apparently the kernel I'm using is 3.0.53-gd28c6eb. Is this okay or do I need to flash a new kernel ?
I have been using Omega rom for many months however recently the phone started to lag very bad, so I tried updating it to the latest update of Omega,however there was no improvement even after a clean fresh install.
So I decided to go back to a stock rom not realising I needed certain functions that only a custom rom provides.
However ever since the loading of the stock rom and re-rooting the phone, every custom rom I have tried, Omega and Sensation, after start up when installing the rom, within 5min the phone just crashes and I cannot do anything unless I take the battery out.
Why would this crashing keep occuring and what could I do to resolve this issue?
Just tried tried flashing Sensation again and installed fine but within 2mins of completing the install, it crashed and I had to take out the battery and reinsert to finish my first time setup, which this time completed.
I then allowed the phone to reload apps trhough google play and within 5mins of installing it again crashed although the charging icon is moving but I cannot select anything on the screen...
mobad said:
I have been using Omega rom for many months however recently the phone started to lag very bad, so I tried updating it to the latest update of Omega,however there was no improvement even after a clean fresh install.
So I decided to go back to a stock rom not realising I needed certain functions that only a custom rom provides.
However ever since the loading of the stock rom and re-rooting the phone, every custom rom I have tried, Omega and Sensation, after start up when installing the rom, within 5min the phone just crashes and I cannot do anything unless I take the battery out.
Why would this crashing keep occuring and what could I do to resolve this issue?
Click to expand...
Click to collapse
did you try full wiping ur s3 and then reinstall omega
Sent from my Supercharged V12 Samsung Galaxy S3 using Tapatalk
When you say full wipe, do you mean through CWM?
I did wipe data, wipe cache, wipe dalvik.
Installed rom will full wipe selected.
After installing, wipe data and cache again.
Still crashing...
Omega problem ask in the Omega thread makes a lot more sense .
jje
I had the same issue with Android Revolution.
Since reverting to stock rom, things seem fine now...
mobad said:
I had the same issue with Android Revolution.
Since reverting to stock rom, things seem fine now...
Click to expand...
Click to collapse
user error or faulty download .
jje
I just recently flashed my Verizon Galaxy Nexus with PARANOIDANDROID 3.15 [Toro] 25-MAR-2013
I love this rom, but unfortunately, I've been getting random reboots, and numerous freezes, which require removing the battery. I get these freezes, and have to remove the battery 4 to 5 times a day (which gets old as you imagine). I just came from a stock JB 4.1.1 Verizon Rom, but have used CM10 and CodenameAndroid ROMS in the past with success.
I'm using TWRP v2.4.1.0. and flashed pa_gapps-full-4.2-20130308.zip along with the PA 3.15 zip (I downloaded both zips from goo.im). I did a factory reset , and cleared the dalvik / cache.
I've done some googling, but haven't found any answers. in all the forums that I have read, people have had no stability issues with this ROM. I really want to stick with this rom, but may be forced to go back to stock if I can't get this rom to run stable.
Any help from the dev community would be much appreciated!
I followed all of the instructions. I bought the Note when it came out, for a pretty penny. I may not be a developer, (yet), but the point I'm making is that I've been doing this for a while now.
TWRP - Running a 4.1 Rom Black Jelly
Fixed my batter charger port - navigation keys don't work
Looking for my beloved AOKP that should have it - I want 4.3
Wipe everything - Reboot into CWM recovery
Wipe everything, the Dalvik, system, cache, data, everything
Updating apps - 92 then right before I'm about to reach the promised land, it reboots!
Next time it reboots there are 60 something apps, still reboots
Reboot loops!
Even when I go back to wipe everything all over again in CWM like Cache Dalvik, and even system, it simply does not boot.
I even formatted system and re-installed the entire operation, twice!
So what's the problem? This is exasperating. I just want a navigation bar, and 4.3.
Thanks.
Have you followed the AOKP thread? Fuze haz developed his own version of CWM recovery to help with the hangups that done are experiencing with 4.3.
Sent from my Big Ass Outlaw Phone.
Thanks. Yes but i am such a lurker i havent asked enough questions to go to that vip forum. I also have read the forum and cant find the fix. Im on a 4.1 stable rom blackjelly now with the customized cwm recovery they provided. I have a floating navbar that is annoying and im surviving just fine. So i guess its no big deal, just frusterating.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
So you are wanting AOKP 4.3 and wanting the navigation bar correct? You can haz. Give the custom recovery that Fuze posted in his op.
When I flashed with TWRP I had a similar boot issue. The message read updating app #of 40... which was odd.Then I rebooted and it read updating app #of 80.
After that I got a 20 minute bootloop and figured I better restore my nandroid and wait. While attempting to get into recovery it then booted and was good to go.
Give the custom cwm in the AOKP thread a shot.
Sent from my Big Ass Outlaw Phone.