[Q] Stuck at Boot Screen - Motorola Photon 4G

hi i just flashed cna Jellybean for my photon but its stuck at bootscren for 3 hours already.Can anybody solve this Im very desperate now guys

Did u fullwipe before flash
Sent from my MB855 using xda app-developers app

MIONS said:
Did u fullwipe before flash
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
yeah i did it 3 times already but still stuck :crying:

Try to Flash again by doing full wipe...,and njoy

koushi2012 said:
Try to Flash again by doing full wipe...,and njoy
Click to expand...
Click to collapse
i already try it 2 times already :crying:

Are you coming from stock
Did you try other jb roms
Sent from my MB855 using xda app-developers app

Reply
szayell22 said:
hi i just flashed cna Jellybean for my photon but its stuck at bootscren for 3 hours already.Can anybody solve this Im very desperate now guys
Click to expand...
Click to collapse
I too had the same issue few days before....
Just follow these steps,
1.Flash TWRP recovery
2.format system,cache
3.wipe data and cache , dalvik cache
4.flash JB ROM for two times
5.flash Gapps
6.Fix Permissions
7.Reboot
Now you will enjoy JB...
Thank if it's helpfull...

Related

HOW To Install ICS CM9 (MY WAY) (flashing twice)

HOW To Install CM9
1- download rom
2- go to recovery and wip data / factory reset
3- clear cache then wip dalvik cache from advanced menu
4- instal rom
5- clear data then reboot then wait for a little while then turn of ur ace
6- go to recovery and clear data and wip cache then wip dalvic cache then install the rom again then clear data and reboot and wait for a moments
7- u got cm9 ics rom
sorry for my long discrption
sorry for my baaad english
Sent from my GT-S5830 using xda premium
When I've installed, I've cleared the dalvik cache at "Advanced" menu. I think it's important.
mother abdulsamad said:
HOW To Install CM9
1- download rom
2- go to recovery and wip data / factory reset
3- clear cache
4- instal rom
5- clear data then reboot then wait for a little while then turn of ur ace
6- go to recovery and clear data then install the rom again then clear data and reboot and wait for a moments
7- u got cm9 ics rom
sorry for my long discrption
sorry for my baaad english
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Thanks for that........and ur English is norlt so baaad.....like u said.....once again thanks....
Sent from my GT-S5830 using xda premium
brunogdb said:
When I've installed, I've cleared the dalvik cache at "Advanced" menu. I think it's important.
Click to expand...
Click to collapse
i.have forget it i will edit it thx
Sent from my GT-S5830 using xda premium
mother abdulsamad said:
i.have forget it i will edit it thx
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I thank you for making this post
Cyanogenmod 9
Can u use it for everyday usage?
ErKo_Ace said:
Can u use it for everyday usage?
Click to expand...
Click to collapse
No ,it's not ready for everyday usage.
Ayushbhatiapro said:
No ,it's not ready for everyday usage.
Click to expand...
Click to collapse
but everything works .. except of the camera....
nevermind.. i will wait for the final version of cm9 rom from wayland's team..
ErKo_Ace said:
but everything works .. except of the camera....
nevermind.. i will wait for the final version of cm9 rom from wayland's team..
Click to expand...
Click to collapse
Yep, but have various bugs. The Twitter apps doesn't works, and some Facebook apps have the same problem. Have a some areas lags and the 3G connection not is 100% when we say about velocity. But, I will wait too the final version or the RC version. This version of system is perfect.
How untill the final version?
did i miss something? for what rom are we talking about ???
Why flash twice? Whats the point?
Sent from my GT-S5830 using xda premium
itasoulas said:
did i miss something? for what rom are we talking about ???
Click to expand...
Click to collapse
The ROM's CM9, based on ICS.
LuisDuarte said:
Why flash twice? Whats the point?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Cuz the first flash will take a hill lot of time to start
Sent from my GT-S5830 using XDA App

Omega installation problems

Hello guy im having some issues installing omega v12 to my gs3 my phone is GT-I9300 model and rooted, I downloaded the room to my internal sdcard and install it via cwm, the installation secced every time but when it reboot it gets stuck at samsung logo and returns to recovery, whats wrong with my phone? or what am I doing wrong?
Anyone pls.!!!!!:crying::crying::crying::crying:
Have you wiped it before flashing the Rom e.g. factory reset wiped cache and delvik cache also they flashing it twice straight after each other
Sent from my GT-I9300 using xda premium
There should be no need to install it twice in a row. Try what was first suggested.. when in recovery, wipe data/ factory reset, wipe cache, wipe dalvik, flash ROM... reboot.
Did you make a nandroid backup before flashing?
Sent from my Galaxy Nexus using xda premium
Coreym said:
There should be no need to install it twice in a row. Try what was first suggested.. when in recovery, wipe data/ factory reset, wipe cache, wipe dalvik, flash ROM... reboot.
Did you make a nandroid backup before flashing?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yup I did all wipe and flash ROM, the Rom flashes perfectly, when it reboots goes to samsung logo twice, than it send me again to recovery mode, and yes, I made a nandroid backup, but its not working, im flashing criskelo ROM to see if it works. Any other Ideas?
Thanks for youre reply!
Keymab said:
Yup I did all wipe and flash ROM, the Rom flashes perfectly, when it reboots goes to samsung logo twice, than it send me again to recovery mode, and yes, I made a nandroid backup, but its not working, im flashing criskelo ROM to see if it works. Any other Ideas?
Thanks for youre reply!
Click to expand...
Click to collapse
Bummer. Yeah flash another ROM if you have it on your SD card.. try to boot into something. If it was a bad DL of the omega rom it shouldn't flash, and the fact that your getting successful is weird
Next step is maybe pushing a files onto your phone via ADB and try to flash again. You got recovery so your not too bad off
Sent from my Galaxy Nexus using xda premium
Coreym said:
Bummer. Yeah flash another ROM if you have it on your SD card.. try to boot into something. If it was a bad DL of the omega rom it shouldn't flash, and the fact that your getting successful is weird
Next step is maybe pushing a files onto your phone via ADB and try to flash again. You got recovery so your not too bad off
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Guess what? Ive just install Criskelo ROm and it worked!! maybe omega ROM is wrong, I really wanted to try it, About criskelo ROM I went here http://forum.xda-developers.com/showthread.php?t=1714091 but no kitchen option appear, I installed normally and I rebooted, what do I have to do?
chek ur md5 of omega rom .. it must be bad download .. its happens when u flash bad downloaded file so always chek md5 before flashing any rom .. nice habit to chek
Sent from my GT-I9300 using xda premium
hisee said:
chek ur md5 of omega rom .. it must be bad download .. its happens when u flash bad downloaded file so always chek md5 before flashing any rom .. nice habit to chek
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Checked, and its the same md5, anout criskelo I downloaded the full ROM not the kitchen!!! LOL
Keymab said:
Checked, and its the same md5, anout criskelo I downloaded the full ROM not the kitchen!!! LOL
Click to expand...
Click to collapse
then try again. wipe data wipe cache wipe dalvik and flash omega it will work if its nt a bad download
Sent from my GT-I9300 using xda premium
Another question, I came from a Gnex and there I knew all ROmS, about gs3 I know nothing, so, whats the best room right now? Omega, Criskelo? I like touchwiz Rom.
see its depen upon u what u want ...looks with good battery (omega)or stock exp (check rom)or very good battery(rgui)..
Sent from my GT-I9300 using xda premium
Damn phone, I just Install criskelo kitchen ROM and I got stuck on samsung screen!! Maybe something is wrong with my s3, i just could install criskol full rom and thats it!!
Keymab said:
Damn phone, I just Install criskelo kitchen ROM and I got stuck on samsung screen!! Maybe something is wrong with my s3, i just could install criskol full rom and thats it!!
Click to expand...
Click to collapse
u have gt i9300 only na. ??? or other version?
Sent from my GT-I9300 using xda premium
---------- Post added at 07:58 AM ---------- Previous post was at 07:57 AM ----------
insll latest cwm. or cf root .
Sent from my GT-I9300 using xda premium
hisee said:
u have gt i9300 only na. ??? or other version?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Yup, GT-I9300.Ill try to post a video.
Maybe you can try formatting your system partition.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Maybe you can try formatting your system partition.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Done. Still the same. It wont boot
Mi stock firm its XXXXALFE something, does it has to do with it?
as I said try to flash latest cf root and flash rom
Sent from my GT-I9300 using xda premium
hisee said:
as I said try to flash latest cf root and flash rom
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I root it with cf-6.4 is that the latest?
Also re-rooted again, and no luck.

disappearing sound

hello poeple i have pac rom and its working great except the sound
its disappearing after few hours of booting phone or letting it away
no sound in music , no sound in viber , no sound in vid
i reflashed but nothing happened
please help
edit:: it doesnt work again unless i reboot
Start from the basics back up your apps and reinstall the Rom and kernel.
Maybe it's a app you have installed that's causing the problem, so install them one at a time if the above options fails
Sent from my YP-G70 using xda premium
and if you suggest a full wipe so would you recommend pac rom or what other rom??
An1mus said:
Start from the basics back up your apps and reinstall the Rom and kernel.
Maybe it's a app you have installed that's causing the problem, so install them one at a time if the above options fails
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
hey
thanks for your help, i reflashed this rom but the problem is still there i also wiped cache and dalvic cache but its the same
do you mean i have to do a full wipe??
rashad543 said:
hey
thanks for your help, i reflashed this rom but the problem is still there i also wiped cache and dalvic cache but its the same
do you mean i have to do a full wipe??
Click to expand...
Click to collapse
Do a full wipe, everything except EMC AND SD
Redownload your rom to make sure, do you have that problem on CM10. 1?
Sent from my YP-G70 using xda premium
An1mus said:
Do a full wipe, everything except EMC AND SD
Redownload your rom to make sure, do you have that problem on CM10. 1?
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
thanks for your reply
i'll try the full wipe even though i dont like installing everything again
and i dont know about cm10.1 because i didnt try and rom other than pac rom
Give cm10 a try and go from there
Sent from my YP-G70 using xda premium
Please read rule 15
Development is for developers to post work
Thread moved
An1mus said:
Give cm10 a try and go from there
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
for sure i will if you say so but do you have any rom in your mind my friend??:fingers-crossed:

Gapps is not installing on ANY rom :(

Hi guys
I've tried installing many version of Gapps on my S3 inc. minimal version.
I clear the 3 catchs each time, but the Gapps dont appear.
I've tried on slimbean, PAC and PA roms but the same happens on each one
Its driving me crazy as this is a new phone and want to start using it
What am I doing wrong?
cramhead said:
Hi guys
I've tried installing many version of Gapps on my S3 inc. minimal version.
I clear the 3 catchs each time, but the Gapps dont appear.
I've tried on slimbean, PAC and PA roms but the same happens on each one
Its driving me crazy as this is a new phone and want to start using it
What am I doing wrong?
Click to expand...
Click to collapse
Are u sure you are using the right provided gaaps?
Whats your phone model exactly?
Sent from my GT-I9300 using xda premium
Its a GT-I9300
and for example I use http://forum.xda-developers.com/showthread.php?t=1933804 for the rom and gapps
Ver3go said:
Are u sure you are using the right provided gaaps?
Whats your phone model exactly?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
and what is this S3 inc. minimal version you are using? is it a stock rom or a custom rom?
Sent from my GT-I9300 using xda app-developers app
cramhead said:
Its a GT-I9300
and for example I use http://forum.xda-developers.com/showthread.php?t=1933804 for the rom and gapps
Click to expand...
Click to collapse
That's an HTC Desire ROM!!!
Yeah I noticed that RASH error as well. That was just a quick google search I used for an example.
I'm not that stupid
krs360 said:
That's an HTC Desire ROM!!!
Click to expand...
Click to collapse
custom rom
just now I tried to flash
with gapps-jb-20130301-signed.zip
cleared catchs. Nothing
what rom are you currently using? based on CM? do you have CWM recovery pre-installed??
Sent from my GT-I9300 using xda app-developers app
My BB is i9300XXEMC2
I'm trying to get PACman rom to work and flashing with CMW
currently downloading cyanogenmod to see if that works
sriram231092 said:
what rom are you currently using? based on CM? do you have CWM recovery pre-installed??
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
boot into CWM recovery. wipe data, cache and dalvik cache. apply zip from sdcard. choose zip and installing..then again choose zip from sdcard and select gapps.zip. is this the procedure you are following? I do the same everytime and faced no problems till now. you ahould have the gapps.zip of the respective rom you flash prior to it.
Sent from my GT-I9300 using xda app-developers app
what recovery?
Thats exactly what I've been doing!
I've just tried cm-10.1-20130522-NIGHTLY-i9300.zip
with CM 10.1 Gapps
booted into CWR
cleared the 3 catches
installed CM10.1
install Gapps
cleared 3 catchs again
....zero Gapps
sriram231092 said:
boot into CWM recovery. wipe data, cache and dalvik cache. apply zip from sdcard. choose zip and installing..then again choose zip from sdcard and select gapps.zip. is this the procedure you are following? I do the same everytime and faced no problems till now. you ahould have the gapps.zip of the respective rom you flash prior to it.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
after flashing rom, just flash gapps and there's no need to wipe anything before or after flashing gapps. just reboot.
Sent from my GT-I9300 using xda app-developers app
I always try both....I'm that desperate now
CMW is 5.5.0.4
Just tried RC1 and install fails
going to try a nightly
sriram231092 said:
after flashing rom, just flash gapps and there's no need to wipe anything before or after flashing gapps. just reboot.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
flash the latest touch version of CWM and you should be good to go.
Sent from my GT-I9300 using xda app-developers app
Thanks. I'm booting into cwr and installing cwm-touch-6.0.3.1-d2tmo.zip
I then go to advance and reboot recovery but im still on 5.5
sorry for the n00b like manor
that is a .tar file buddy. You can't flash it thriugh recovery. you have to put your mobile into download mode , connect to pc via uab. start desktop odin, select pda and then CWMtouch.tar file and hit start. then once you see the pass, it is done.
Sent from my GT-I9300 using xda app-developers app
you sure you got the recovery for the i9300?
found this
will give it a shot
Glebun said:
you sure you got the recovery for the i9300?
Click to expand...
Click to collapse
yes. flashing the wrong recovery kills the phone

[Q] Stuck at CM booting Logo After RESET FACTORY SETTING

Goodevening!
Ma'am/Sir,
Anyone can help me fix my device "S2 I9100"..
It was already Rooted.. And it happned that I feel some hang ups so I've decided to reset factory settings.
Andafter that when I turn on my phone its stucks @ the CM loading Logo.
What happen to my phone?
Can anyone give me some instruction on how to fix this..
Hoping for your support.
Regards,
Efpraim
Go into recovery and look for mounts and storage. Go into that and format data and cache. Come out of that and go into advanced and wipe cache there too. Reboot.
If that don't work reflash the rom and gapps. If that don't work flash stock with Odin. Standard stuff really. :thumbup:
Sent from my GT-I9300 using xda premium
andrewwright said:
Go into recovery and look for mounts and storage. Go into that and format data and cache. Come out of that and go into advanced and wipe cache there too. Reboot.
If that don't work reflash the rom and gapps. If that don't work flash stock with Odin. Standard stuff really. :thumbup:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
THANK YOU SIR!
now its continuing to boot. but sir there is another problem.
my launcher is gone. and stuck in plane black screen and i can't access my SETTINGS.. T_T
ebanayo said:
THANK YOU SIR!
now its continuing to boot. but sir there is another problem.
my launcher is gone. and stuck in plane black screen and i can't access my SETTINGS.. T_T
Click to expand...
Click to collapse
Reflash rom and gapps mate. If it still does it grab another rom and flash that. Also make sure the gapps you're flashing is for the os you're using :thumbup:
Sent from my GT-I9300 using xda premium
Goodevening!
Sir,
Can I request instruction on how to reflash the rom and gapps?
Im think my phone runng os is jelly bean.
Thanks in advance!
ebanayo said:
Goodevening!
Sir,
Can I request instruction on how to reflash the rom and gapps?
Im think my phone runng os is jelly bean.
Thanks in advance!
Click to expand...
Click to collapse
Was or are you on cm rom?
Sent from my GT-I9300 using xda premium
Goodnews Sir,.. Ive found my eay fixin my phone.. Hehe.
Yes sir,..im running in cynogenmod 10.1.2 nightie..
Its just happend that the rom and gapps is already in my internal memory and get into recovery mode wipe out the date/factory reset and install the rom and gapps.. Reboot.. Hehe thank you very BIG! ^_^
ebanayo said:
Goodnews Sir,.. Ive found my eay fixin my phone.. Hehe.
Yes sir,..im running in cynogenmod 10.1.2 nightie..
Its just happend that the rom and gapps is already in my internal memory and get into recovery mode wipe out the date/factory reset and install the rom and gapps.. Reboot.. Hehe thank you very BIG! ^_^
Click to expand...
Click to collapse
Glad you sorted it if you have any more problems just post on this thread and I'll get back to you:thumbup:
Sent from my GT-I9300 using xda premium
Sir.., stk was missing in my phone. And add'l other network is not working on my phone. T_T
ebanayo said:
Sir.., stk was missing in my phone. And add'l other network is not working on my phone. T_T
Click to expand...
Click to collapse
Pls stop calling me sir. :thumbup:
Check Imei and see if it's the same as on the back of the phone. Don't post a ss of you're Imei.
Sent from my GT-I9300 using xda premium
It has the same imei..
Download a rom for you're model of phone and flash that. Make sure the gapps match. Or return to stock with Odin.
Sent from my GT-I9300 using xda premium
Could you give me some advice what rom should i replace?
Im running gapps-jb-20130301-signed.zip
Thanks!
Have a look over here perhaps:
http ://galaxys2root.com/category/galaxy-s2-roms/
If you are very uncertain or very new to placing Roms, checkout the reviews before installing.
I'd like the wizzkat rom but I cant find the file.zip >_<
ebanayo said:
I'd like the wizzkat rom but I cant find the file.zip >_<
Click to expand...
Click to collapse
Whizzkat is a little unstable, after booting it hangs.
You can find the zip here for the INTL Samsung Galaxy S2 (Being the GT-I9100): http: //d-h.st/rUc WizzedKAT_v1.2.zip - 370.36 MB
Make sure you have the newest CWM or comparable (6.0.4.5 or higher)
Make sure you know what you are doing
Hmm.. Okay thanks for the info.
How about the SIV Series v2.05-1.ZIP?
By the way what is CWM?
Im running in CWM 6.0.3.2 >.< how can I up grade it to .4.5?
ebanayo said:
Im running in CWM 6.0.3.2 >.< how can I up grade it to .4.5?
Click to expand...
Click to collapse
Did you try to google your solution already? Try this:#q=upgrade+cwm+recovery

Categories

Resources