Related
Use it at your own risk!
This mod is NOT for XXJPM!
It has been made from the framework files of a JPQ and JPS, so on an odexed JPM rom it causes bootloop!
It's for XXJPQ and XXJPS.
So it wont make the Browser.apk crash like the older 5 Lockscreen Mod did it.
(Check out the last part of this post!)
(You must be rooted and know how to push files to the phone. And one more thing: first of all you should check the free space in /system (e.g. if you use RootExplorer), especially on the odexed roms.)
5 Lockscreen Mod and Extended Power Menu for Odexed XXJPQ and XXJPS.
5 Lockscreen Mod and Extended Power Menu for Deodexed XXJPQ and XXJPS.
(Framework-res.apk and Settings.apk are stock themed.)
Android LockScreen for odexed/deodexed JPS/JPQ* rom and also for odexed XWJPK is attached below.
* 'android.policy' has been made from JPS, but it works on JPQ too
HOW-TO:
5 Lockscreen Mod
It’s started from the point you have flashed a clean, stock JPS or JPQ via Odin: the device is already booted and you have unplugged the USB cable from it.
Getting root access
- Go to ’Settings > Applications > Development’ and enable ’USB debugging’
- Plug the USB cable back into the phone > run SuperOneClick.exe > press ’Root’ and wait
- When the ’Test?’ dialogue is popped up, say ’Yes’ > you can close SuperOneClick
- Your device has been rooted
- Directly after these steps, do the followings:
Pushing modified files to the phone
- Download the suitable zip for your odexed or deodexed JPQ or JPS rom
- Extract the downloaded zip
- Navigate into the extracted folder
- Run ’push_5lckscr....bat’ and wait*, your device will have rebooted
- Modded files are already pushed to the phone, now you can use your favourite lockscreen and the extended power menu
Of course there are other methods, RootExplorer etc.
*If you are on an odexed rom and see something like this in cmd: "failed to copy 'system\framework/framework.odex' to '/system/framework/framework.odex': No space left on device" and "rm failed for /system/framework/framework.jar, No such file or directory", don't panic, it's normal due to the low free space.
History:
Hi again! Now I have come with a very nice and well known mod. However this one is for people who want to have the 5 Lockscreen Mod and Extended Power menu, but don't want to have a deodexed rom!
So you can download this mod for your odexed XXJPQ/XXJPS from above. I've just realized that the only reason for me to deodex a rom is because of those damn lockscreens and the extended power menu. But I could not find this mod for odexed roms, so I had to odex it by myself.
---
Hello to All, I've attached an android.policy.odex for those who want stock Android lockscreen on their odex XWJPK.
---
Hi All!
After I had deodexed a stock (only rooted) XXJPQ rom, I tried to apply the 5 lockscreen mod on it. Seemed like everything was good... But when I had opened the "Internet", it force-closed immediately (nor factory reset didn't help).
So I had started to search the reason of this issue. After a while I figured out that the FCing of the Internet app was because of the "non-JPQ" framework.jar. So I took the JPQ's framework.jar and added a .smali file to its classes.dex what is necessary for the extended power menu (com\android\internal\app\ShutdownThread.smali).
The result: working 5 lock screen mod with extended power menu on JPQ without crashing of the Internet app!
If interested, you can download it from here. Framework-res.apk and Settings.apk are stock themed files, so you can delete that lines from the batch... Actually, the relevant file is the framework.jar.
Try 5lockscreen mod
mY custom rom has stock lockscreen :L
Stock lockscreen for stock XWJPI and XXJPQ: http://www.megaupload.com/?d=SNJ3ZI17
Credits by Halco
Here is the way to add Stock lockscreen on a firmware.
But care, on this step :
4. Replace the contents of this method with the attached file getLockScreenMode.txt.
Dont do this, juste replace on you method getLockScreenMode()Lcom :
PuzzleLock by TapLock
GlassLock by TapLock
Then follow the rest of the steps
I tried this tutorial with XWJPK, but when I try to deodex the file I always get this error:
Code:
Error occured while loading boot class path files. Aborting.
org.jf.dexlib.Util.ExceptionWithContext: Cannot locate boot class path file core
.odex
at org.jf.dexlib.Code.Analysis.ClassPath.loadBootClassPath(ClassPath.jav
a:237)
at org.jf.dexlib.Code.Analysis.ClassPath.initClassPath(ClassPath.java:14
5)
at org.jf.dexlib.Code.Analysis.ClassPath.InitializeClassPathFromOdex(Cla
ssPath.java:110)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:98)
at org.jf.baksmali.main.main(main.java:278)
Can you help me, please?
Which file do you try to deodex? Do you mean all of them? In that case, I use this one, so I recommend. It always works for me. Sorry, but I don't understand exactly the source of your problem (maybe I'm too tired)... What's your goal at all? 5 lockscreen mod on a deodexed XWJPK?
Sry, but I don't understand you exactly, too
I tried this Tutorial and therefore I need android.policy.odex and so a odexed framework, right?
But I'm sorry, at this topic I'm totally new at this topic. It would be nice if you could upload the modded files for JPK...
I am using stock rom jpm rooted by default..i want this 5 lock screen..
Can I get that..?
Please tell me the step by step procedure..
Sent from my GT-I5800 using XDA App
JPM is no problem!
You can use Kitchen 2.0!
GalaxyDrei said:
JPM is no problem!
You can use Kitchen 2.0!
Click to expand...
Click to collapse
Please give me the link to download kitchen 2
Sent from my GT-I5800 using XDA App
Sry, it was deleted...
I think it also should work with Kitchen 3.0...
Ask benzyniarz1
GalaxyDrei said:
I tried this tutorial with XWJPK, but when I try to deodex the file I always get this error:
Code:
Error occured while loading boot class path files. Aborting.
org.jf.dexlib.Util.ExceptionWithContext: Cannot locate boot class path file core
.odex
at org.jf.dexlib.Code.Analysis.ClassPath.loadBootClassPath(ClassPath.jav
a:237)
at org.jf.dexlib.Code.Analysis.ClassPath.initClassPath(ClassPath.java:14
5)
at org.jf.dexlib.Code.Analysis.ClassPath.InitializeClassPathFromOdex(Cla
ssPath.java:110)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:98)
at org.jf.baksmali.main.main(main.java:278)
Can you help me, please?
Click to expand...
Click to collapse
You got this error because when you tried to deodex android.policy, you forgot to pull all the .odex files from /system/framework. For some reason it is not enough to pull only the android.policy.odex
No, I pulled the whole framework, so I can't understand why I get this error!
Strange... By the way, I've uploaded the modified file you asked for.
Thanks a lot
Is there any tutorial about pushing this to the phone? I didnt see it anywhere...
I will update my first post as soon as I have enough time. It will be a few days since now I have to work...
Hi,
Can you make a only Android Lockscreen for XXJPS? I dislike the Extended Powermenu and the Option of more lockscreens, but only want Android Lock.
Hopefully someone can provide me that!
Stylooo
Nice job could you please post some basic instructions for porting this to some other stock(odexed) rom I know how about compiling and decompiling using smali etc just tell me which files to edit .
Sent from my GT-I5800 using Tapatalk
Hi all.
First, all credits go to Kyrillos and Hillbeast cause they show me how to fix that
Sooo here we go : You wanna enable 9 lockscreen mod without these ugly small bug icons and you want that with every deodexed JPU rom ?
Follow those steps !
* Download this .zip : Download here
It contains the framework and the libs that enable 9 lockscreen mod.
* Now you have two choices:
- Either you flash by CWM directly, without changing anything, so you will have by default the theme of Kyrillos v9.0+.
If you do so, then you can flash all themes that are compatible with 9 lockscreen mod (Delete all the .jar files in the update !! And follow the theme installation of course )
- Either you change the .zip, by adding your own framework-res.apk and twframework-res.apk (Do not forget your themed apps, add a folder 'app' in /system (Use 7-Zip to do so))
WARNING : Do not remove / modify the lib folder or these three files from framework folder : framework.jar, services.jar and android.policy.jar
* Reboot your phone, and enjoy
Credits :
Kyrillos for helping and his modified framework
Hillbeast for show me the way of missing libs
___________________________________________________________________
Got problems ? Read this :
I flash my theme and I got a bootloop ???
Click to expand...
Click to collapse
Try wipe dalvik cache.
If it doesnt work, check that you have removed all .jar in the .zip of your theme. You only need jars files from my zip that you downloaded.
Then if it doesnt work too, post in the thread, the community will help you
You should add that it works on JPU. On any other froyo firmware it may be buggy.
Ah sorry yes..
I always forgot that Indians got an other firmware... Sorry, will modify that ^^'
If someone on ddjp6 could try and tell us, would be great
Sent from my Elora galaxy 3
Is this 9 lockscreen MOD?
Yes, it's a way to enable it in JPU (with a default theme : Kyrillos v9.0+, and all libs required)
After flash it, u can flash every theme which requires 9 lockscreen mod, like Miui 1.4.5 by Ghost in the Ruins for example
I'm currently on a stock JPU deodexed with the Miui 1.4.5 theme
So do i have to install kyrllios 9+?
Sorry for questions. I'm noob.
Certainly not
You can just flash this .zip from CWM without modified anything and enjoy with 9 lsm. By default, you'll get Kyrillos v9.0 THEME, just the theme ^^
Then, you can flash every theme you want that requires 9lsm
Nice share mate. This should solve the confusion. I will redirect my theme threads to here for users who are not on custom ROMs.
Is every lib file is necessary in the package you provided, because I noticed that one lib file is of terminal emulator.
I put libs files from Hillbeast.
I will modify it when i can
Sent from my Elora galaxy 3
After flashing the file (wiping dalvik-cache and cache) and rebooting my bootanimation appears but after that booting stucks and all I see is a black screen. It won't start at all.
I tried flashing the zip as it is and a zip containing my framework-res.apk and twframework-res.apk from a UOT-Kitchen-Theme. I also did a third zip containing my SystemUI.apk (which is not affected by my UOT Theme)
For replacing I used 7zip as recommended and also Total Commander.
I'm using a Custom deodexed JPU with converted filesystem as follows:
stl6 ext2
stl7 ext4
stl8 ext2
Any idea on fixing this? (I have a CWM-Backup, so nothing can get lost )
t-rip said:
I tried flashing the zip as it is and a zip containing my framework-res.apk and twframework-res.apk from a UOT-Kitchen-Theme. I also did a third zip containing my SystemUI.apk (which is not affected by my UOT Theme)
For replacing I used 7zip as recommended and also Total Commander.
Any idea on fixing this? (I have a CWM-Backup, so nothing can get lost )
Click to expand...
Click to collapse
Is the framework that you put in the zip 9 lockscreen modded?? Either flash the zip as it is or put a framework-res.ap that is 9 lockscreen modded into the zip and flash,
And SystemUI.apk?? We don t have SystemUI.apk in Froyo. Please don t put that.
I flashed it as it is AND with my modded framework-res.apk and twframework-res.apk. So I flashed 2 different zips with restoring system and wiping caches between the flash operations. Both zips didn't work.
The SystemUI.apk I used is the one I took from my phone and I replaced the one in the zip for testing purposes.
Do I only have to replace the framework-res.apk and have to leave twframework-res.apk untouched?
t-rip said:
I flashed it as it is AND with my modded framework-res.apk and twframework-res.apk. So I flashed 2 different zips with restoring system and wiping caches between the flash operations. Both zips didn't work.
The SystemUI.apk I used is the one I took from my phone and I replaced the one in the zip for testing purposes.
Do I only have to replace the framework-res.apk and have to leave twframework-res.apk untouched?
Click to expand...
Click to collapse
No. twframework-res.apk is not modded for 9 locks. Its the same. If you flashed the zip as it is without replacing any files and it still didn t work?? Then I don t have any idea.:/
That's the problem. The provided zip doesn't work. I tried it.
alternative download link possible?
Hi all,
the link given in the first posting is dead -> goes to megaupload.
Would it be possible to get a mirror download link?
That would be very great.
Thanks in advance.
Cheers
qaysed
Yup, sorry. Due to down of MU, i'll give us an alternate download link, but it's not on this PC.
If someone else could up it for me (i could up it in 2 days) thanks in advance for all.
Here's a mirror while megaupload is down or you reuped the zip by yourself.
http://ul.to/ku5rvvya
runs perfect!
thanks for the quick mirror!
works like a charme.
No stopping services, no reboots or freezes.
Libs are also exchanged... that´s new to me.
I assume that is the root cause for my problems, in exchanging the frameworks.
Have to accustom myself to the four symbols on lock screen. First try: opened the phone
and thanks to halco for distributing the file
and of course hillbeast and kyrillos mentioned already in the first posting
Cheers
qaysed
hi, can you upload to other websites plz! Megaupload is dead
For All Defy and Defy + JB Roms
*****Disclaimer***
- Before flashing the BM.Memfree.Defy.zip please patch your service.jar first and place it in the zip /system/framework/
You can get your services.jar from the rom you're currently using with a root explorer. It is located in system/framework/
To Patch it read from *Optional Memfree tweak* in the quote....
Thanks to Husi10 for the heads up
Please thank brainmaster for the zips - Here
Also lambgx02 for his work on the seeder - Here
Below is the original quote from brainmaster read it to know more about the tweaks
brainmaster said:
Here is the description of the Tweaks:
Scripts in the /system/etc/init.d folder:
08dalvik - Moves the Dalvik cache from the ext4 /data/dalvik to the faster yaffs /cache/dalvik partition
95zipalign - This is more enhanced zipaligning method. Its zipaligning the apps in the /system/app and /data/app. It also creates the database that contains infos on apps that are already zipaligned, and checks that databe on reboot. If all apps are zipaligned, it skips the zipalign process. Zipaligning is useful because its reducing the amount of used RAM
99bmtweak - Contains the tweaks that I've collected and enhanced over the time. Included are IO tweaks, TCP tweaks, SDCard ReadAhead tweak, SQLite Vacuum Database tweak
hosts file in the /system/etc folder:
Hosts file makes your Phone ADFree.
resolv.conf file in the /system/etc folder:
Google DNS Servers
placeholders in the /system/app and /data/app folders:
If you want to add a system app or install data/app with the CWM Zip file, just drop the apk in the /system/app or /data/app folder in the CWM Zip file and they will be installed when you flash the CWM Zip.
/kernel folder:
Enables the init.d script support.
updater-script in the /META-INF/com/google/android folder:
Deletes the Cache and Dalvik Cache, mounts the /data and /system partitions, copying the needed files. It sets the permissions. If you are editing that file, be SURE to use the Notepad 2 or Notepad ++ and use the Unix file system encoding when saving the file, not the regular Notepad Windows app.
build.prop tweaks Injector in the /tmp folder:
Injects the values in the /system/build.prop file. The /tmp/mytweaks.sh file shouldn't be edited! The file /tmp/misc contains the buildprop tweaks. You can add your own build.prop tweaks in that file.If you are editing that file, be SURE to use the Notepad 2 or Notepad ++ and use the Unix file system encoding when saving the file, not the regular Notepad Windows app, also IF you use comments (#Disable.ADB.Notification.Icon), DON'T use spaces, use ONLY the underline or dot character! These tweaks are included:
Code:
#Disable.ADB.Notification.Icon
persist.adb.notify=0
#Disable.Google.OTA.Checkin
ro.config.nocheckin=1
#Disable.Google.Reports
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
#Enable_Google_DNS_Servers
net.dns1=8.8.4.4
net.dns2=8.8.8.8
#HSPA.Tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hsdpa.category=16
ro.ril.hsupa.category=8
#Dalvik.Optimization
dalvik.vm.execution-mode=int:jit
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v
Installation
Step 0: You must be rooted!
Step 1: Download the Busybox installer app and install the Busybox to /system/xbin. Again - install the Busybox to /system/xbin not to /system/bin!
Step 2: Reboot to recovery and install the BM.Tweaks.NEXUS.S.zip file.
Optional Memfree tweak - set to 100 MB:
In order to use the Memfree tweak on every ROM, extract the /system/framework/services.jar from the ROM and upload it to android.mimic.ca, let the site edit the file, download the edited services.jar and put it in the BM Memfree zip file. Then flash the BM Memfree zip in the Recovery.
The attached Memfree zip is for the stock JZO54K ROM.
Optional BM Seeder:
You can read everything about the tweak here.
This is my version adjusted for the Nexus S.
How can I be sure that the tweaks are working?
Open the RootExplorer and click on the /cache folder. IF the dalvik-cache folder is present, THEN the tweaks are working properly. Check also your /system/build.prop file for the #Brainmaster Tweaks area.
The tweaks are universal - not ROM version related, and can be flashed over any ROM but ONLY for NS or NS4G.
Disclaimer:
ALWAYS make a NANDroid Backup of your current ROM so that you can go back if you don't like the tweaks.
I will NOT reply any users PM's regarding this thread or my ROMs, only the DEVs should contact me over PM.
If you are user and have questions, write HERE in the thread.
BEFORE asking any questions, make sure that you read this post.
Click to expand...
Click to collapse
Ok So what I have done here is to modify the updater-script to work for the defy.... That's it
I haven't really touched anything else as am not a dev so can't tweak it specially for our defy but since our hardware is similar to the nexus s then I think it should be fine
Notes -
- People with a lot of apps installed on the phone either delete the 08dalvik file from the zip before flashing or after because you may not be able to install apps after this is due to the tweak using the /data partition for dalvik-cache.
- If you have already flashed the zip then Delete 08dalvik from system/etc/init.d.
-You want want to also check this out Don't use this and seeder zip at the same time.
Instructions - Flash zips in recovery and reboot
Don't forgot to patch your services.jar if your using the BM.Memfree.Defy.zip
Changelog
Seeder -
Updated rngd binary for seeder ---- It deepsleeps now noticeable reduced battery drain
BM tweaks & Memfree -
updated to the latest version from brainmaster
Downloads
http://www.mediafire.com/?k0gxranyqnt9w
Mirrors are always welcome
Credits for the original work :
Brainmaster
Lambgx02
Patch the services.jar? How would I do that? I understand the rest
Thank U For the Brainmaster's Tweaks for our Defy
ldnjoe said:
Patch the services.jar? How would I do that? I understand the rest
Click to expand...
Click to collapse
Updated OP with more tips
Kayant said:
Updated OP with more tips
Click to expand...
Click to collapse
In order to use this tweaks should I remove the tweaks that I have from pimp my rom first?
There is any difference with the included in pimp my rom?
This ones are better?
Edit: I don't think that the memfree or seeder binary is included in pimp my rom. I'll give it a try in PAC.
I'm currently using some tweaks I have been collecting and they give me some good results.
Hope this will increase the performance even more.
So, any feedback on results yet? I know it's a fresh mod, but still
Nailtrail said:
So, any feedback on results yet? I know it's a fresh mod, but still
Click to expand...
Click to collapse
Haven't really tested it fully yet but when I tested CM10 with chrome & a some apps in the background it was smooth I mean there was not lag in scrolling for me on chrome when browser theverge.com but as always there was whitespace because of our slow phone
The BM seeder thing really does work I think because one place I see the phone being me optimized is when you wipe dalvik cache for instance It takes ages for it to optimize the apps again if you have many but with the BM seeder tweak installed the process for me was at least two times faster
Btw I had all tweaks installed.......
Thank you Kayant for the release, that was really fast!
I flashed everything, seem to be great as excepted! I don't know if it's placebo effect but when I saw "optimizing app" during 3 time less than usual I think that's powerful.
We need more time to debate about stability or battery but my first impressions are great.
Thank you again for your awesome work.
Sent from my MB526 using xda app-developers app
Husi10 said:
Thank you Kayant for the release, that was really fast!
I flashed everything, seem to be great as excepted! I don't know if it's placebo effect but when I saw "optimizing app" during 3 time less than usual I think that's powerful.
We need more time to debate about stability or battery but my first impressions are great.
Thank you again for your awesome work.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
+ 1 its the same here.. just testing now..
Nailtrail said:
So, any feedback on results yet? I know it's a fresh mod, but still
Click to expand...
Click to collapse
At the moment am just testing...
I only install the seeder binary but I can say that i had seen an improvement in the default browser and in the play store.
I don't see much lag on it. I don't have much bandwidth so could be it that prevent me from seeing the hole potential of the seeder.
Sometimes stuck from loading the play store content for example but it doesn't bother at all.
I'm very happy with the results.
will be testing this and report back later.
here the link for services.jar mod for cna 4.0 by kayant.
credits to blk_jack
Seems to be working
Thanks Kayant! :good:
Seems to be working... the browser works faster and the lock screen waking is much faster....
There seems to be an improvement in gaming performance....
still testing...
do I need to wipe cache or dalvik before or after installation?
Edit: never mind, I'm testing it now, first impression the load of apps is super fast, I have 170 apps loaded in less than 2 minutes, awesome!
thanks for sharing.
modified a version from brainmaster's zips cause I don't like all build.prop changes and I'm to lazy to patch service.jar
the seeder mod with init.d script from brainmaster works better than the original one load only, it makes the phone faster in response and loading apps.
the zipaglin works and the other tweaks else, but need more testing.
@Kayant
The website for modding services.jar says its for ICS and I had read in V6 thread that the website method wont work for JB. In his second post he gives alternate method.
zopeon said:
@Kayant
The website for modding services.jar says its for ICS and I had read in V6 thread that the website method wont work for JB. In his second post he gives alternate method.
Click to expand...
Click to collapse
Thanks.... Will update the OP later ....
Edit - OP updated now checking to see if the tweaks need updating (v6)
Let's Go ^_^
zopeon said:
@Kayant
The website for modding services.jar says its for ICS and I had read in V6 thread that the website method wont work for JB. In his second post he gives alternate method.
Click to expand...
Click to collapse
Agree, since i modified the services file and put the mem tweak started to get much more lag than without it.
It won't work in PAC.
I just put the 08dalvik in init.d, along with 95zipalign and the zipalign file into xbin. That should do right? I mean I want just the dalvik to /cache and the zipalign tweaks.
So I have been using V6 supercharger for ages. Now I turned off the supercharger zipalign option and then realized there is no zipalign in /xbin for CM10, it has never been running till now!
So, guys... One should probably disable V6 Supercharger completely, for these tweaks to work as they should? Or not?
I've finally supercharged my phone after a couple of months and now, a week after flashing, it's still running at the same smooth speed, where it would slow down after half of that time without the supercharger...
Want to try this, anyway, so, are the two compatible in any way..?
Cheers, Kayant, for the Defy version!
niksy+ said:
So, guys... One should probably disable V6 Supercharger completely, for these tweaks to work as they should? Or not?
I've finally supercharged my phone after a couple of months and now, a week after flashing, it's still running at the same smooth speed, where it would slow down after half of that time without the supercharger...
Want to try this, anyway, so, are the two compatible in any way..?
Cheers, Kayant, for the Defy version!
Click to expand...
Click to collapse
I suppose you should turn off V6 if you choose the Memfree tweak, and also zipalign.
But see my post above, zipalign probably isn't running if you are using CM10, check system/xbin to make sure!
But personally I let V6 handle the memfree and stuff, I know it works so I'd rather not try something else
Hi All !!
I was using this ROM for quite a while, thought i'll share my work with you all.
This is for i9200, But i am not sure if it would work for i9205.
Its based of stock i9200 i9200XXUDNK1 KitKat 4.4.2 from sammobile.com.
Its a mixture of Odexed and deodexed.
==============================================
The S5 features it has are,
Systemui of S5
Note 4 launcher (actually S5 launcher, i just themes the page navigator icons to look like Note 4)
Lockscreen of Note4
Settings of S5
Note 4 weather
Some S5 apps like Magazine, Group play, Group Camcoder, S5 gallery, S5 music, S5 contacts and dialer, SPlanner, SVoice, Voice Recorder, etc etc..
===============================================
Oops! lot of Note 4 mentioned above, but mainly its all got from S5.
Currently i am trying to search forums on how to make an Update.zip Rom so that you can all just flash it.
All i have now is just a backup of my Rom which i made using PhilzTouch 6.48
Please see the screen shots. attached.
Internet connection is slow.. so please gimme time to upload.
Will post the links soon on mediafire.
ROM Download Link & steps to flash
ROM Links and Steps to flash.
Modem and Boot.img included in the download links.
Two methods:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
First Method
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
==================================================================================
1: Download the Backup named "2015-01-16.07.49.38_KOT49H.I9200XXUDNK1.7z" from Mediafire using the link below.
Link = https://www.mediafire.com/folder/qrtmbymle0c0d/Bevin_ROMs
The file has an extension 7z.
Extract the folder inside the zip file using 7Zip to your desktop.
Make sure the contents are extracted to a folder with the name " 2015-01-16.07.49.38_KOT49H.I9200XXUDNK1 " on your desktop
There are totally 12 files inside " 2015-01-16.07.49.38_KOT49H.I9200XXUDNK1 " folder.
2: Download PhilzTouch recovery version 6.48 and flash it
Reboot to the Phiztouch recovery and go to philzsettings-> uncheck md5 verification (thanks to Fredo2000)
3: Backup your current ROM (full backup - if in case anythin goes wrong) to sdcard or external sdcard (sdcard1).
4: Reboot to your current rom and connect your phone to the computer.
5: Now from your computer... Go to Computer->locate your phone-> go to memory card->clockwordmod folder->backup folder->paste here (the folder " 2015-01-16.07.49.38_KOT49H.I9200XXUDNK1 ) which was extracted on your desktop.
6: Reboot phone to Philz Recovery.
Click Wipe Factory Reset -> Clean to install a new ROM.
Click Backup and Restore - Restore from sdcard1
you should see the rom you pasted from your desktop here.
Restore 2015-01-16.07.49.38_KOT49H.I9200XXUDNK1 ROM
7: Reboot phone
8: Phone will boot with the new Lollipop Screen.
9: Wait for a minute till everythin looks fine and then go to settings add wifi networks and add account - Google
10: All the S5 customization will be intact in this method.
==================================================================================
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Second Method
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
===================================================================================
1: Download the CWM Flashable zip ROM named " S5ROMforMEGAi9200_17Jan2014.zip " from the below link
Link : https://www.mediafire.com/folder/qrtmbymle0c0d/Bevin_ROMs
2: Reboot to PhilzTouch Recovery
3: Wipe Factory Reset Phone -> clean to install a New ROM
4: Install Zip -> install from sdcard/sdcard1 -> S5ROMforMEGAi9200_17Jan2014.zip and flash.
5: Reboot to recovery again.
6: Re-root system using Philz touch miscellaneous settings.
7: setup wizard comes up and proceed till you get to the home screen.
8: You will find the navigation bar. Do not disable it in build.prop instead follow step 9.
9: Install Xposd Framework apk (search it and download it from google), open the app, install framework. reboot.
10: Install GravityBox KK apk from the download section of xposd app. Install it. Enable it in modules. Restart
11: go to gravitybox app reduce the size of the navbar to like 0 or 1 .. prefered is 0 using the slider.
12 That will get rid of the navigation bar (this is important for the dialer) and wil stil have the overflow menu enabled everywhere.
13: download AppSettings from xposed app under download section and install it. enable it in the modules section. reboot.
14: open App settings app and look for contacts.
15: change the dpi from 0 to 320 and save (this is important for the phone dialer to become full screen)
16: thats pretty much you have to do. everythin else is present already in the ROM.
17: to explore the various features.. long press the notification toggle icons.. it ll open a new menu which is not present in the settings.
18: using xposd app you can download even floating windows to make windows float like note 4.
===================================================================================
Some of the Apps are preloaded as I like it that way. You can uninstall them as you please.
This ROM has no bugs so far, so if you do find bugs - I will be happy to fix them and release another ROM later on.
If you Factory Reset your phone, you might lose certain customizations done on XPosed Framework. (Hence i suggest you not to unless you know what you are doing)
====================================================================================
If something does not work fine related to network bluetooth or Wifi (most unlikely) - Flash XXDNK1 modem.
====================================================================================
:good:
This ROM is stock Samsung ROM i9200XXUDNK1 (latest release of 4.4.2 from samsung) with S5 built in apps.
I use the stock baseband (modem) i9200XXUDNK1 and have face no issues so far.
Features of this ROM - Unlike any other
Things you will notice on this ROM
=======================================================================
1: I made a unique tweak with air view turned on, Thers always a feedback on the screen whereever your finger moves be it lockscreen or any other window.
2: Power Saving in Settings shows Different options and Power Saving in Notification Toggle shows greyscale options.
3: Viper audio to boost the Audio output.
4: 31 toggles. Even S5 doesn't have so many toggles. But 31 looks best for our big screen.
5: funcitonal Quick connect and SFinder.
6: Watch on remote control on notification panel when turned on.
7: Life Companion (smaller font)
8: First available Ported Note 4 look launcher with no stupid pullup app to screw with it.
9: Note 4 weather widget (fully transparent)
10: Group Camcoder works
11: All the Apps are updated to their latest release.
12: Device Status - Official (but do not update)
13: No branding what so ever. I dint do it as i hate it when i have to see others Name or their logos on my phone. Its so annoying!!
14: Double tap the staus bar to sleep
15: 4 way reboot options
16: Haptic feedback enabled by default with sound for air view.(power saving can disable it)
17: Android Version shows 4.4.4 (but its just a tweak)
18: S5 icons on settings and S5 settings.. all working.. no bugs!!
19: First working S5 keyboard for our phones with all working functionality.
20: Some awesome things i did to the ROM that i am forgetting right now to mention.
21: I did no tweaks to the performance of the ROM as I dont wanna play with that part. You can do it yourself.
22: Floating windows and all other tweaks are part of XPOSD
=======================================================================
Why didn't i share this earlier?
I was too busy flashing lollipop ROMs..and just realised this was better than everythin else.
So, spent more time fixin problems on the phone and now i share my work with all of you.
Hope you Enjoy my ROM as i do - but then it really doesn't matter to me if you do not.
If you dislike my work, just remember that no one ever shared a stupid S5 ROM before while all the other phones like S3 s4 and Note 2 Note 3 etc all had developers making S5 and note4 roms for these devices and none for us.
Feel free to rip my ROM apart and do whatever you want with it.
Thanks to Blekota for his Samsung S3 ROM. It made my Mega alive!!
Thanks to unclefab too.
You don't need to make a zip if you are rooted.
From your phone, open your android terminal and type:
su
dd if=/dev/block/mmcblk0p20 of=/sdcard/system.img
Wait a bit, after a while you'll have your system.img in your sdcard (but make sure you have sufficient storage as it's a pretty big file).
Then, to anyone wanting to push it on one's phone, put the img file on your sd and type:
su
dd if=/sdcard/system.img of=/dev/block/mmcblk0p20
You can do it from adb too, just type adb shell before su.
If the phone doesn't boot after flashing the img you'll have to wipe wipe data and cache.
Did you keep the original boot.img or did you flash the S5's?
In case you used the S5's boot.img and want to add it to your rom, type this:
dd if=/dev/block/mmcblk0p13 of=/sdcard/boot.img
@bevinabraham :
my connection is pretty slow too so I'd like to ask you 2 questions before I attempt to download:
1-did you replace the whole system/app and the whole system/framework folders?
2-how is the multi windows function? Any difference compared to the stock Mega 4.4.2?
Do you have that note 4 feature that enables to resize full screen windows from the screen edges (swiping down from either top left or top right)?
The proper way is to use an android kitchen (e.g. http://forum.xda-developers.com/showthread.php?t=633246) but it seems that may be out of your wheel house. There are also ways to make a full update zip of your ROM via nandroid and some play store apps.
Sent from my GT-I9205 using Tapatalk
unclefab said:
You don't need to make a zip if you are rooted.
From your phone, open your android terminal and type:
su
dd if=/dev/block/mmcblk0p20 of=/sdcard/system.img
Wait a bit, after a while you'll have your system.img in your sdcard (but make sure you have sufficient storage as it's a pretty big file).
Then, to anyone wanting to push it on one's phone, put the img file on your sd and type:
su
dd if=/sdcard/system.img of=/dev/block/mmcblk0p20
You can do it from adb too, just type adb shell before su.
If the phone doesn't boot after flashing the img you'll have to wipe wipe data and cache.
@bevinabraham :
my connection is pretty slow too so I'd like to ask you 2 questions before I attempt to download:
1-did you replace the whole system/app and the whole system/framework folders?
2-how is the multi windows function? Any difference compared to the stock Mega 4.4.2?
Do you have that note 4 feature that enables to resize full screen windows from the screen edges (swiping down from either top left or top right)?
Click to expand...
Click to collapse
Hi,
Actually thats not what i am trying to do.
How to people get the starting new set up wizard etc when you just flash a rom? how do i export all the folders such as the whole system folder with the boot.img in it into a update.zip?
any code for that?
To answer your second question..
I did not replace the whole System APP PrivAPP and the framework folders as its a larger resolution that ours..
So, I just ported only a few files from the system app and a few files from the priv app and a lot of lib and etc files and twframework files.
Then i modded the stock frameworkres.apk file from the framework folder with the s5 frameworkres,apk .
So its pretty much the whole that we see outside is all of s5 stuff..but everythin under it which we cant see (are the stock functions)
and its not themed if thats what u meant.. the lockscreen is of note4..
The floating windows i got using Xposed framework. i can resize it..
The multiwindow is stock multi window.. from the DNK1 rom.. its slightly diff that the old ones i guess as u can add and edit items,.
AndroidSlave said:
The proper way is to use an android kitchen (e.g. http://forum.xda-developers.com/showthread.php?t=633246) but it seems that may be out of your wheel house. There are also ways to make a full update zip of your ROM via nandroid and some play store apps.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
Yes.. i ll try this.. i saw it in the recovery of PhilzTouch.. to clone the ROM.
trying it now.
The boot.img, if I understood well you kept the one from the mega so you can forget that part.
Then, there's no need for any starting wizzard, people just flash your system.img and get whatever tweaks you put inside, that's it.
You can of course use android kitchen, but the method I gave you is by far the easiest and the fastest.
Nowadays I use this method, I make my rom the way I like it and add this or that, then I make an .img image ready for flashing, and I only use android kitchen if I need to edit my boot.img.
Lat but not least, once you have a system.img you can pass it through 3 commands and make it an odin flashable file for people that aren't rooted.
Reagrding note 4, I'm not interested in lockscreen stuff, I just wanted to know if the multi windows function in your rom is the same than in the stock mega Kk or if it has new features.
unclefab said:
The boot.img, if I understood well you kept the one from the mega so you can forget that part.
Then, there's no need for any starting wizzard, people just flash your system.img and get whatever tweaks you put inside, that's it.
You can of course use android kitchen, but the method I gave you is by far the easiest and the fastest.
Nowadays I use this method, I make my rom the way I like it and add this or that, then I make an .img image ready for flashing, and I only use android kitchen if I need to edit my boot.img.
Click to expand...
Click to collapse
oh okay.. i guess i ll do this then.
thanks.
Right now its still creating an update zip...but i can see a line that says system.ext4.tar.a
so..probably thats not what i expected.
i ll use your method..
thanks a lot.
wow pls port to gti9205. me to try port this to gti9205
djraz said:
wow pls port to gti9205. me to try port this to gti9205
Click to expand...
Click to collapse
I am onot sure if it would work on i9205, but then there is no reason why it should not work as this rom does not have the baseband/modem file etc.. just the boot and the system.
hy man . used base stock MegaKatI9205Deodex v18 and added s5 apps features so work nex apps : svoice,calculator bug layout, loockscreen partiality, launcher partiality bug icons, and can't change wallaper, file manager, calculator bug layout, music player, video player,group palyer,browser,album,bootscreen, app manager but not work keyboard.. gallery don't work.. so now i need fix next bug. layout. so i need redit dpi
s5 rom for mega
Uploading my Rom to mediafire.
Will post the links soon by tomorrow afternoon.
bevinabraham pls share with me ur systemui.apk ,tw or launcher4,loockscreen,dialer+contacts,secsettings,camera. u used for ur porting..and keyboard. because i have somproblem with this files for my porting.. pls send me and reply
djraz said:
bevinabraham pls share with me ur systemui.apk ,tw or launcher4,loockscreen,dialer+contacts,secsettings,camera. u used for ur porting..and keyboard. because i have somproblem with this files for my porting.. pls send me and reply
Click to expand...
Click to collapse
Hi,
I just saw ur S5 sway ROm for i9205.
Congrats dude.
So both i9200 and i9205 will have the S5 rom features. Awesome
i got the apps frm here
http://forum.xda-developers.com/showthread.php?t=2690997
pls share me this files.. because u some files edit and putt in ur rom.. so i need them for mi pack pls.i write u in pm message
Hey man..(bevinabraham)... This becomes fantastic certainly!! If it can hardly wait for my Mega to the S5. To make Mega
Micha71 said:
Hey man..(bevinabraham)... This becomes fantastic certainly!! If it can hardly wait for my Mega to the S5. To make Mega
Click to expand...
Click to collapse
Hi thanks dude.
Wait for 24 hours.. i ll reach office tomorrow and upload the ROM (they have fast internet connection)
Good luck with your ROM :good:
blekota pls support me djraz and bevinabraham to recompile file system ui, dialer+call e secsettings.calculatyor and tw layout display..
Installation guide of microG services in three ways:-On ROMs with signature spoofing option.
-On Deodexed ROMs without signature spoofing option.
-On Odexed ROMs without signature spoofing option.
I'm using win10 all the time here, and this guide is for Nougat ROMs only.
Hi everybody! Two months ago I discovered the awesome world of microG, a life without original google play services, without any of my data on google and with better battery life (we all know how google services drains battery). For more general information, refere please to these threads and forums:
https://forum.xda-developers.com/android/apps-games/app-microg-gmscore-floss-play-services-t3217616
https://microg.org/
https://shadow53.com/no-gapps/
Today I present you my guide (none of this work is done by me, I'm just showing the way I install these services) to install microG features.
The first thing we need is a ROM without gapps included. Then is needed to know if it supports signature spoofing out-of-the-box, you can see if the ROM is present on this list: https://forum.xda-developers.com/android/general/index-list-custom-roms-offering-t3557047 or ask developer in his own thread. If it supports it, you can directly go to the instructions num 1) . If else, you need to know if the ROM is odexed or deodexed, for this, you can ask on the dev thread or unpack the rom yourself.
How to unpack the ROM:
You can unpack it with 7-zip and then decompress it with this tool: https://forum.xda-developers.com/android/software-hacking/tool-tool-unpack-repack-dat-img-v2-0-t3284806. You must place the system.transfer.list and the system.new.dat you'll find in the decompressed folder in the Input_dat folder of the tool given, then open the tool with usage permission and mark option 1, then wait until process is finished and you'll have the output in the System_unpack folder.
Then you only need to go to the /system_/framework/ folder and see if there's any arm, arm64, folder with .oat files inside. If there isn't, congratulations, your rom is deodexed and you can follow path 2). If there is any of these folders mentioned with .oat files, your rom is odexed, and you'll need to follow path 3).
Note: on all this process we will be using the @Shadow53 files placed on https://shadow53.com/no-gapps/downloads/, I personally use the "microG with playstore" and the "calendar and contacts" flashable zips (I've modified the calendar and contacts zip because of some issues with sync that i don't know if were solved, I let the modified flashable zip later in this post) please, before asking or complaining, read his page fully, his work is awesome.
1) ROMs with signature spoofing option:
This is the easy way. We only need to install the clean ROM and then flash the microG and the sync packages we've donwnloaded before. Once booted, we only need to active signature spoofing option and check microG Self-Check and we are ready to go. In order to install backends for network location, please, refer to proper threads.
2) Deodexed ROMs without signature spoofing option.
Here we will follow the steps as if we had a signature spoofing option (as the previous paragraph) but obiously we won't active nothing when booted and we will use this tool: https://forum.xda-developers.com/android/development/tingle-fork-needle-t3438764 (please, read carefully before asking) if your ROM is deodexed and you follow the steps carefully, you'll have patched the ROM in a few minutes. Then you just need to reboot and check with microG Self-Check.
3) On Odexed ROMs without signature spoofing option.
This is my "original" way, as nobody explained fully how to do it. Here, you need to deodex the framework folder and then flash the rom with the tingle patch already applied. Let's begin.
First, you need to get the /system_/framework and the build.prop you unpacked when checking if the rom was or not odexed. Then you need to deodex it by using this tool https://forum.xda-developers.com/android/software-hacking/tooll-03-12-fulmics-deodexer-1-0-t3512081 (I have to say sometimes it only works for me the 1.1 version) it's easy, you'll need to download the tool and the backsmali, smali 2.2 or later (already compiled in .jar, I let them later in this thread) and run it.
Once you have the framework deodexed (erase the arm, arm65 and oat folder if there is any left) you just need to get the framework.jar and patch it with tingle (option 2 in the script, the patched file will be in the output folder), then replace the patched framework in the deodexed framework folder.
Now you just need to pack it in a flashable zip that must erase the current framework folder of your ROM and then place the one you deodexed, for this, I let you all a flashable zip I made modifying the one the ZIPme app made. Yo must unpack it and replace the framework folder in "system" with the deodexed one with the patched file and repack it.
Then you just need to flash the clean ROM and afte that the framework-replacer.zip and all microG flashable zips you need, once booted you can directly check microG and you'll se it is already patched.
Suggestions are welcome on this guide!
Many thanks to all devs and people made all this possible:
Marvin for microG.
Shadow53 for his guide and flashable zips.
ale5000 for tingle.
xpirt for fulmics deodexer.
Kritsada Chaitan for his unpacking tool.
Primokorn for his signature spoofing support list.
JRummy Apps for ZIPme.
kevinkvothe (I gess)
Anyone else feeling he/she should be on this list, please, tell me.
Downloads.
https://mega.nz/#F!id1jlZoS!6Su8IJeGQnYO_3olQmQMTg
Reserved
Pole
Thanks for the concise, resource-rich guide. I've been trying to patch an odexed ROM for the past few weeks, and never thought to try and flash it with the patched framework.jar. Cheers! I'm going to give this a try first thing tomorrow!
Thx for this guide, worked for me...
Best regards
@kevinkvothe
Hi,
have you tried my Google Sync Add-on?
It would be nice to know if it is working for everyone.
That was one hell of a long ride but I got the signature spoofing working.. Thanks a lot.
I got the Error [RH-01] with play store but after rebooting it was fixed somehow.
ikzouhetnietweten said:
That was one hell of a long ride but I got the signature spoofing working.. Thanks a lot.
But my Play Store aint working! it says Error [RH-01] , I tried everything from deleting cache, data, enabled google device registration in micro settings, enabled google cloud messaging.. etc etc Everything is checked in Self checked.
Click to expand...
Click to collapse
Enable "Google device registration" in micro settings, then clear data of Play Store, termintate it and remove it from recent apps.
Then run it again.
ale5000 said:
@kevinkvothe
Hi,
have you tried my Google Sync Add-on?
It would be nice to know if it is working for everyone.
Click to expand...
Click to collapse
I tested it once, when I started to learn about microG and it didn't work, but I'm not sure all was working and if I had signature spoofing support so... I'll test it when possible.
Hi all,
I'm using RR + Magisk + NanoMod which can achieve this faster. However, I was dumbfounded when I couldnt get sync properly to work, however flashing the google sync adapter work. I urge anyone who want to use microG to use nanomod version, as it is simpler. you only have to flash via twrp and let it sit.
ale5000 said:
@kevinkvothe
Hi,
have you tried my Google Sync Add-on?
It would be nice to know if it is working for everyone.
Click to expand...
Click to collapse
thank you
xiiihyou13 said:
Hi all,
I'm using RR + Magisk + NanoMod which can achieve this faster. However, I was dumbfounded when I couldnt get sync properly to work, however flashing the google sync adapter work. I urge anyone who want to use microG to use nanomod version, as it is simpler. you only have to flash via twrp and let it sit.
thank you
Click to expand...
Click to collapse
It depends what you mean, both are flashable zip so as simplicity should be the same.
kevinkvothe said:
I tested it once, when I started to learn about microG and it didn't work, but I'm not sure all was working and if I had signature spoofing support so... I'll test it when possible.
Click to expand...
Click to collapse
In the latest version I have fixed permission problems, so it will most likely work out of the box.
xiiihyou13 said:
Hi all,
I'm using RR + Magisk + NanoMod which can achieve this faster. However, I was dumbfounded when I couldnt get sync properly to work, however flashing the google sync adapter work. I urge anyone who want to use microG to use nanomod version, as it is simpler. you only have to flash via twrp and let it sit
thank you
Click to expand...
Click to collapse
But unfortunately Nanomod Patcher does not work on odexed and deodexd ROMs, I don't know yet if mine is odexed or deodexed but will have to check It's the unofficial LinageOS 14.1 for lt03lte - the official nightly does unfortunately not detect my external SD Card!
Juat FIY, now that nougat supports xposed, this is much easier when using Fakegapps module [emoji106]
Lähetetty minun MI 5 laitteesta Tapatalkilla
Seems like noone mentioned this but microG have own fork of LineageOS with already build in microG services.
https://lineage.microg.org/