Wont boot... - Barnes & Noble Nook Tablet

I am having major major issues. I have an 8gb nook tablet xhhbntv250-a, and have my sdcard written but it just wont boot up with sdcard I have to take it out to turn it on I have tried other CWM's and redownloaded the one from this guide http://forum.xda-developers.com/showthread.php?t=1466583 but nothing works. I have burned many before for the color but this one just wont work. Someone please help me. I have succesfully restored from the sdcard but thats all i can do. I have formatted 8 and 2 gb sdcards nothing seems to work. Thanks for any help!

addictedhacks said:
I am having major major issues. I have an 8gb nook tablet xhhbntv250-a, and have my sdcard written but it just wont boot up with sdcard I have to take it out to turn it on I have tried other CWM's and redownloaded the one from this guide http://forum.xda-developers.com/showthread.php?t=1466583 but nothing works. I have burned many before for the color but this one just wont work. Someone please help me. I have succesfully restored from the sdcard but thats all i can do. I have formatted 8 and 2 gb sdcards nothing seems to work. Thanks for any help!
Click to expand...
Click to collapse
Any luck booting while plugged into wall charger?

addictedhacks said:
I am having major major issues. I have an 8gb nook tablet xhhbntv250-a, and have my sdcard written but it just wont boot up with sdcard I have to take it out to turn it on I have tried other CWM's and redownloaded the one from this guide http://forum.xda-developers.com/showthread.php?t=1466583 but nothing works. I have burned many before for the color but this one just wont work. Someone please help me. I have succesfully restored from the sdcard but thats all i can do. I have formatted 8 and 2 gb sdcards nothing seems to work. Thanks for any help!
Click to expand...
Click to collapse
have you set the sdcard partition to bootable?

ShinnAsuka said:
have you set the sdcard partition to bootable?
Click to expand...
Click to collapse
I'm rooting a NT for a friend using SD Card. I just did their kids' Nook Colors no sweat. This one boots CM7 when I plug it into the wall, but not otherwise. Is there a way to make this thing boot of the SD card all the time? How would I set the sdcard partition to bootable (it seems like it must be, for it to ever work).

Here is a video
addictedhacks said:
I am having major major issues. I have an 8gb nook tablet xhhbntv250-a, and have my sdcard written but it just wont boot up with sdcard I have to take it out to turn it on I have tried other CWM's and redownloaded the one from this guide http://forum.xda-developers.com/showthread.php?t=1466583 but nothing works. I have burned many before for the color but this one just wont work. Someone please help me. I have succesfully restored from the sdcard but thats all i can do. I have formatted 8 and 2 gb sdcards nothing seems to work. Thanks for any help!
Click to expand...
Click to collapse
This may help also, here's the video. "You don't need to install ubuntu to do this.
Basically quick format fat32 in windows on a spare sd card and not your main sd
extract the 4 files to sd
download and burn ubuntu cd, boot ubuntu cd you just made and skip 7:02 in video to demonstrate setting the two flags "boot and lba" apply the change to this on your sd card.
you are all set. Good luck:victory:

Related

New NT won't boot off of SD?

Hey Guys,
I just got my 16gb NT during ebay's $199 sale. I'm having a serious problem getting the thing to boot off of an SD card. It came stock with 1.4.1, but I think something's different because I've tried:
Restoring back to 1.4.0 with the acclaim_update.zip:
http://forum.xda-developers.com/showthread.php?t=1402190
And the NT root SD card
Nook Tablet Root SD Cards
No mater what I do, I can't get it to boot off of the SD card via the zip or into CWM, all I get are factory reset screens instead of CWM. I've tried 3 different SD cards.
I'm going to give this a shot next:
http://forum.xda-developers.com/showthread.php?t=1470910
I don't know if it's going to work, so any help would be greatly appreciated. What's stopping my NT from booting off of the SD?!
why go back to 1.4.0 you don't need to. use indirect method using his image writer tool supplied if your on windows it sounds like you are not formatting the sd card
nba1341 said:
why go back to 1.4.0 you don't need to. use indirect method using his image writer tool supplied if your on windows it sounds like you are not formatting the sd card
Click to expand...
Click to collapse
I've tried formatting the cards both using windows and the NT internal tool. I've also tried writing the image file both directly to the SD and to the SD mounted in the nook.
I'll try indirect's method first.
I wanted to go to 1.4.0 to snowball.
It is my understanding that BN made a change in the new 8 gig NT that somehow prevents booting from the sdcard. Check other threads. No one so far has been able to boot from sdcard. Making some changes in Indirect's setup may solve it so I read on one of the threads. good luck.
Singingdrum said:
It is my understanding that BN made a change in the new 8 gig NT that somehow prevents booting from the sdcard. Check other threads. No one so far has been able to boot from sdcard. Making some changes in Indirect's setup may solve it so I read on one of the threads. good luck.
Click to expand...
Click to collapse
Not an 8gig - full 16 gig.
nba1341 said:
use indirect method using his image writer tool supplied if your on windows it sounds like you are not formatting the sd card
Click to expand...
Click to collapse
Doesn't work. Formatted through the nook, connected through the nook, wrote the image through the nook, etc. Went to go boot up (power+n, screen on/off, eject/reinsert card, power on) - all I got was a factory reset option instead of CWM.
Something is amiss.
Singingdrum said:
It is my understanding that BN made a change in the new 8 gig NT that somehow prevents booting from the sdcard. Check other threads. No one so far has been able to boot from sdcard. Making some changes in Indirect's setup may solve it so I read on one of the threads. good luck.
Click to expand...
Click to collapse
That change is the bootloader locking up because it's the wrong bootloader.
AdamOutler said:
That change is the bootloader locking up because it's the wrong bootloader.
Click to expand...
Click to collapse
Again, this is a 16gb nook tablet, not an 8gb. It looks like, very very briefly, I may be getting something other than the factory reset screen - I see what looks like the start of the nook bootup animation, then a green arrow that flashes quickly, before I get the factory reset screen.
I bought the NT from the Ebay sale last week as well. Have you heard of anyone else having issues booting off the SD card?
I was planning to book the NT tomorrow. Sounds like I might be returning mine if that doesn't work...
Nikkie
Try turning it off completely, inserting the SD card, and plugging it into your computer.
Sent from my Nook Tablet using Tapatalk
so to clarify things. you put the acclaim update zip on the sd card. and did you let it reset your nook to 1.4.0 or not? Also you don't have the acclaim update zip on your memory card when you are trying to boot off the sd card do you?
It did not try to reset it. It didn't do anything other than boot normally.
I know it sees SD cards because i can look at files, but it did not boot from it.
ok. wipe your sd card. put on ONLY the acclaim update zip. nothing else. stick that in your nook then turn it off. (in that order) then when it powers back on, let it update your nook
once it's updated, turn your wifi off and check what version you are on. then delete the acclaim update zip from your sd card and report back. KEEP IN MIND. it's NOT "booting off the sd" for this. it's just resetting the software to 1.4.0. if you think it's supposed to boot off a sd for this, think again. expect to see something along the lines of a factory update. that's what it's supposed to do whenever the acclaim update zip is on your sd card.
pissinguoff247 said:
Again, this is a 16gb nook tablet, not an 8gb. It looks like, very very briefly, I may be getting something other than the factory reset screen - I see what looks like the start of the nook bootup animation, then a green arrow that flashes quickly, before I get the factory reset screen.
Click to expand...
Click to collapse
Yeah, you're not affected by it. Your problem is operator error. They can't change hard-coded IROM with a firmware update.
I don't know what I did but I finally got acclaim to wipe me back to 1.4.0.
I had 3 different SD's formatted in various ways through the pc, through the tablet, etc. Each time it was ONLY acclaim on there. 158th time's the charm, I guess.
Now to tackle the apk parse errors while trying to sideload stuff.
Parse errors are caused by selecting the first button option just once when installing an app and then the second option button which is the only one you should ever select will give you parse error as well. If you do a search on parse errors you will see it.
All the Best
I was having issues with my SD card not booting last night during my CM7 install. After checking my work in Gparted I knew it was OK. Finally I unzipped the files into the upper root and it booted. I know I had it boot with the zip before but this time I could not get it to work?
pepi4 said:
I was having issues with my SD card not booting last night during my CM7 install. After checking my work in Gparted I knew it was OK. Finally I unzipped the files into the upper root and it booted. I know I had it boot with the zip before but this time I could not get it to work?
Click to expand...
Click to collapse
What exactly do you mean by "upper root?" I'm trying to get CWM and CM7 installed now that I know this thing will boot something off of the SD but I'm back to square 1
pissinguoff247 said:
What exactly do you mean by "upper root?" I'm trying to get CWM and CM7 installed now that I know this thing will boot something off of the SD but I'm back to square 1
Click to expand...
Click to collapse
If you are on 1.4.0, go to http://nook1.adamoutler.com then nook2 and 3
Choose package installer. Then use some adb root
AdamOutler said:
If you are on 1.4.0, go to http://nook1.adamoutler.com then nook2 and 3
Choose package installer. Then use some adb root
Click to expand...
Click to collapse
Nice.
Finally got CWM using the APK. This is a f!cking nightmare. I swear this thing is messing with me.

[Q] Bricked Nook Tablet Assistance

I have an 8GB Nook Tablet and made the foolish mistake of attempting to try and root it with acclaim-update.zip. Now my Nook will no longer boot and I've tried every unbricking method available. No progress was made.
I was a bit too eager to eager and rushed headfirst into it without researching it more thoroughly. If there's no fix for it, then that's fine. I just wanted to run through ever resource possible before giving up on it. I have spent the past few hours scouring the internet and coming up with little to nothing.
Have you tried booting CM7 from sdcard?
What things have you tried to make it boot?
Sent from my Nook Tablet using xda premium
Shouldn't you just be able to put the unmodified acclaim_update.zip on your sdcard? It should work and fix your nook. When you put the sdcard in, make sure the device is off, and then connect it to the power adapter to get it to turn on
IF its completly dead/ erased boot erea then your only option will be jtag.
http://dl.dropbox.com/u/64885133/bn_142_factory_recovery.zip
put that image on a sd card and boot by plugging in the usb cable into the charger
soshite said:
Shouldn't you just be able to put the unmodified acclaim_update.zip on your sdcard? It should work and fix your nook. When you put the sdcard in, make sure the device is off, and then connect it to the power adapter to get it to turn on
Click to expand...
Click to collapse
Wrong he has 8GB model if you do that you will brick your device AS OP DID!!!
READ THE FAQ - link in my signature
~ Veronica
Sent from my Nook Tablet using xda premium
lavero.burgos said:
Have you tried booting CM7 from sdcard?
What things have you tried to make it boot?
Sent from my Nook Tablet using xda premium
Click to expand...
Click to collapse
So far I've tried the Ubuntu method of unbricking it, factory reset, and booting with the 1.4.2 zip file to return it to factory settings. None of them have worked.
But I'll try CM7 and see if it works.
Am in the the same shoes... got a bricked NT 8GB... looking forward to restoring 1.4.2...
attempts to restore the firmware to factory:
Cyanoboot + altboot + B&N 1.4.2
Followed guide here http://forum.xda-developers.com/showthread.php?t=1562130 , using (a) the img from dropbox and (b) nooktablet_1_4_2_update.zip from B&N. No luck. The process stops on the initial screen on cyanoboot, where it shows 'Loading (sd)...'. I don't even get to enter the menu that shows the boot options.
flashing_boot + B&N 1.4.2 update in ext3 partition
Next I downloaded the img link above, http://forum.xda-developers.com/showpost.php?p=24912163&postcount=5 , no luck also, the tick appeared on the flash 'Installing new software' screen after 4 minutes. After I removed the mSD card, the NT did a data cleanse, and got an error message about 40% into the factory restore prompting me to contact B&N. It then goes into the reboot loop (this is where I am now).
Ubuntu unbrick
No luck. NT don't even boot up to mSD with the mSD card slotted in.
I've tried the above multiple times, downloading the files few times as well. Am still stuck in the reboot loop.
Would like to seek help from gurus here for pointers... Am stuck at this point.
Thanks alot!
self-help said:
Ubuntu unbrick
No luck. NT don't even boot up to mSD with the mSD card slotted in.
Click to expand...
Click to collapse
just a note : when i made it the first time with my xp pro pc, it did not work ( boot ) and then i made it in mint - ubuntu os - and the little sd card then worked.
.
something about windoze...
I have a tablet that appers to be bricked I put Cm7 on internal flashed it worked then I needed to flash the gaps and when I went to recovery and tried to flash and since then it boots up to the N screen then I see the white busy box screen then blank. Nothing nada. So now I have a $250.00 paper weight:banghead::banghead:
Sent from my SAMSUNG-SGH-I997 using xda premium
Can you get to CWM using Indirect's NT-CWM-SD package from here: http://forum.xda-developers.com/showthread.php?t=1466583
Get a micro SD card, fire up gParted (or whatever partition manager), put a new MSDOS partition table on it. Then make a new FAT32 partition at the beginning of the disk. Set the boot and lba flags. Copy the contents of Indirect's zip onto the disk. Stick it in the NT. Hold power + n for 10 seconds and wait for the grey "n" to show up on the screen for a second. Then turn it on.
If that takes you to CWM, then you've got options.
using a properly formatted SD card should solve most issues.. its the great thing about the nook.
1.make sure your using a good SD card. sandisk 8gb class and up would be best
2. make sure you grab the 8gb nook cm7 image.
3. preferably use a component based card reader. by that i mean one other then a laptops.. the laptop ones tend to be picky and lots of people in the nook color days had issues and most were resolved by using a computer one over a laptop one
4. with the nook OFF plug the usb cable into the nook then into the usb port on a computer
check out stickies too
Bricked NT8
grrmisfit said:
using a properly formatted SD card should solve most issues.. its the great thing about the nook.
1.make sure your using a good SD card. sandisk 8gb class and up would be best
2. make sure you grab the 8gb nook cm7 image.
3. preferably use a component based card reader. by that i mean one other then a laptops.. the laptop ones tend to be picky and lots of people in the nook color days had issues and most were resolved by using a computer one over a laptop one
4. with the nook OFF plug the usb cable into the nook then into the usb port on a computer
check out stickies too
Click to expand...
Click to collapse
Negative. I wish you were correct but - in this case - you are not.
Your advice is probably appropriate for those who cannot get an SDCard to boot properly. However, the O.P. has a bricked device and his original post is most descriptive. His NT8 will not boot to the INTERNAL EMMC. (I have the same problem.)
There are several of us here on XDA who are not novices with this issue. The O.P. has listed the various steps that he has followed and they are much more involved than a simple SDCard format issue.
BTW, most formatting issues are when users are attempting to format with Windows. I use Linux exclusively and I can ALWAYS build a boot SDCard without issues.
Also in the same boot as the O.P.
I also am having this problem. Been going through it for mths now. I've tried every possible fix people could come up with. I have been talking to a youtuber albertwertz. he would like me to send in my nook tablet to him to fix and try out different things. I would like to but cant afford it at the moment. Dang I hope someone finds a fix for this or make a cm9 sd bootale img or something dont get me wrong i like booting cm7 from sd but is this all im subject too. HELP SOMEONE. what are these developers working on. lets get this fix my people. PS thanks for all you all hard work on all roms.
Lost Nook 1.4.0 partition
Hi, Lavero.
I think I may have accidentally deleted the default nook partition. I can still boot up via SDCard and goes into CM7. How can I recover those default partition? Do you have those commands within Terminal Emulator or any other options?
If I do not put in my SDCard, with power cable connected, the nook tablet 16GB keep rebooting. I still want to recover my Nook default OS so that I can repartition it the next time I go to BN.
Hope to hear from you. Thanks.

[Q] Nook Tablet 1.4.0 stuck on boot loop

hi new to the forums so please be nice. i have a nook tablet 1.4.0 which was rooted before with the first cm7 release im guessing. well yeah i recently gone back to college and wanted to update my nook so i wanted to delete everything to restore it to stock, idk what program i used or what i did but it didnt work. i think by that time i was stuck on a boot loop where the n logo just goes on and off after that i saw a thread about a total wipe by using ubuntu i tried that and it worked perfectly i was back in stock. my stupidy lead me to want cm7 back since the apps in nook tablet stock wont let me read the books i have online. as soon as i tried to get cm7 i was stuck in a boot loop again i wanted to see if the ubuntu thing was gonna be the solution for my stupidity but this time it didnt work. it was stuck in "writing all zeros". i tried another boot loop solution by ray waldo it didnt work. i can still run cwm but it has some errors in the background saying "can't mount recovery/command/log/log/last_log/last_log. i want my tablet back just to get it to stock is the best solution i would want and i would just keep it that way. ty for your time.
norkiz23 said:
hi new to the forums so please be nice. i have a nook tablet 1.4.0 which was rooted before with the first cm7 release im guessing. well yeah i recently gone back to college and wanted to update my nook so i wanted to delete everything to restore it to stock, idk what program i used or what i did but it didnt work. i think by that time i was stuck on a boot loop where the n logo just goes on and off after that i saw a thread about a total wipe by using ubuntu i tried that and it worked perfectly i was back in stock. my stupidy lead me to want cm7 back since the apps in nook tablet stock wont let me read the books i have online. as soon as i tried to get cm7 i was stuck in a boot loop again i wanted to see if the ubuntu thing was gonna be the solution for my stupidity but this time it didnt work. it was stuck in "writing all zeros". i tried another boot loop solution by ray waldo it didnt work. i can still run cwm but it has some errors in the background saying "can't mount recovery/command/log/log/last_log/last_log. i want my tablet back just to get it to stock is the best solution i would want and i would just keep it that way. ty for your time.
Click to expand...
Click to collapse
First thing I'd try would be to make a bootable CM7 SD ROM. If you can boot into that SD ROM, you'll at least have an operating system for the time being, and you can still try to figure out/fix the problem that was created in the internal system.
Sent from my Slider SL101
Solar.Plexus said:
First thing I'd try would be to make a bootable CM7 SD ROM. If you can boot into that SD ROM, you'll at least have an operating system for the time being, and you can still try to figure out/fix the problem that was created in the internal system.
Sent from my Slider SL101
Click to expand...
Click to collapse
i have a cm7 booted in a sd card (32 gb) im guessing you cant take the sd card off and you cant use the sd card for storage purposes because it has cm7 files in it. or is there a way to get it back that idk about? ty for your reply btw.
norkiz23 said:
i have a cm7 booted in a sd card (32 gb) im guessing you cant take the sd card off and you cant use the sd card for storage purposes because it has cm7 files in it. or is there a way to get it back that idk about? ty for your reply btw.
Click to expand...
Click to collapse
You can still put files on your SD card. The let me try to explain:
The CM7 image that you wrote to your SD card created 4 partitions. By using a free software called MiniTool Partition Wizard on a PC, you can extend the 4th partition (the one for user data) of your SD card to consume the rest of your storage space. The software is really easy to use, you shouldn't have any trouble with it.
Again, I know this all isn't fixing your main issue yet, but at least you'll have a tablet again until it hopefully gets fixed up.
Solar.Plexus said:
You can still put files on your SD card. The let me try to explain:
The CM7 image that you wrote to your SD card created 4 partitions. By using a free software called MiniTool Partition Wizard on a PC, you can extend the 4th partition (the one for user data) of your SD card to consume the rest of your storage space. The software is really easy to use, you shouldn't have any trouble with it.
Again, I know this all isn't fixing your main issue yet, but at least you'll have a tablet again until it hopefully gets fixed up.
Click to expand...
Click to collapse
tysm for helping me solar. imma do it fresh from the start right now i have a clean 32 gb micro sd card. i downloaded the cm7 for the sd. i have minitool partition wizard installed. whats my next move. im sorry for the trouble im giving you.
No trouble for me, my friend. We're all here to help.
Okay, so I assume you're running Windows here:
1.) Write the CM7 SD .img to your microSD card using the Win32DiskImager tool found in the opening post of the CM7 ROM thread.
2.) After that's finished, open up the Partition Wizard software and find your SD card disk (make sure it's the right one!)
3.) Choose the option to resize the 4th partition of your SD card. Resize it so that all off the unallocated space becomes part of that last partition.
4.) After you're satisfied with that, click the option to apply those changes and wait for it to perform those actions.
5.) You should now be good to put the SD card into your NT and boot up into your new CM7 ROM!
Solar.Plexus said:
No trouble for me, my friend. We're all here to help.
Okay, so I assume you're running Windows here:
1.) Write the CM7 SD .img to your microSD card using the Win32DiskImager tool found in the opening post of the CM7 ROM thread.
2.) After that's finished, open up the Partition Wizard software and find your SD card disk (make sure it's the right one!)
3.) Choose the option to resize the 4th partition of your SD card. Resize it so that all off the unallocated space becomes part of that last partition.
4.) After you're satisfied with that, click the option to apply those changes and wait for it to perform those actions.
5.) You should now be good to put the SD card into your NT and boot up into your new CM7 ROM!
Click to expand...
Click to collapse
im at step 3 im kind of confused on what to do at that part. this is what im looking at right now. tysm
norkiz23 said:
im at step 3 im kind of confused on what to do at that part. this is what im looking at right now. tysm
Click to expand...
Click to collapse
Okay, you're good there. Go to Disk 2, and the 4th partition down. Click on it then click the Move/Resize button on the toolbar of the program. Then just drag the bar all the way across and you will see that you're changing the storage of the 4th partition.
Report back if you get stuck.
Solar.Plexus said:
Okay, you're good there. Go to Disk 2, and the 4th partition down. Click on it then click the Move/Resize button on the toolbar of the program. Then just drag the bar all the way across and you will see that you're changing the storage of the 4th partition.
Report back if you get stuck.
Click to expand...
Click to collapse
ok sorry is the 4th partition the 26.09 gb unallocated?
No, that 26.09GB is unused right now (unallocated space).
The fourth partition is simply the fourth one down, it has a capacity of 1.30GB. You want to resize that one.
Solar.Plexus said:
No, that 26.09GB is unused right now (unallocated space).
The fourth partition is simply the fourth one down, it has a capacity of 1.30GB. You want to resize that one.
Click to expand...
Click to collapse
god dude your the best. thanks a bunch even though its a temporary fix its still a big help!
No problem. At least now you still have a tablet to work with!
nook wont turn on
my nook tablet wont turn on i downloaded that 1.4.0 and my nook went dead did the power button for 20 sec and kept it charge over nite and still nothing did all the button and held them still nothing wont turn on
jesse1627 said:
my nook tablet wont turn on i downloaded that 1.4.0 and my nook went dead did the power button for 20 sec and kept it charge over nite and still nothing did all the button and held them still nothing wont turn on
Click to expand...
Click to collapse
Are you using the official Barnes and Noble USB cable and wall charger?
Sent from my Slider SL101

NT 8GB Can't get root

yonu said:
any one having a problem with a boot loop to a black screen no box or anything it reboots shows the n then flashes white real fast the goes to black screen? I have tried the recovery sd but it doesn't seem to do anygood
Click to expand...
Click to collapse
yea im having a heck of a time trying to get my NT 8GB to root no matter what thread i go to or what i put on any of my sds it just boots like normal. i have tried holding the n button down with the power button and using every usb port on my comp. i have been searching forums here, on tabletroms, and youtube. i have 1.4.3. im about to go nuts here. any advice would help and be greatly appreciated.
o0oXDAo0o said:
yea im having a heck of a time trying to get my NT 8GB to root no matter what thread i go to or what i put on any of my sds it just boots like normal. i have tried holding the n button down with the power button and using every usb port on my comp. i have been searching forums here, on tabletroms, and youtube. i have 1.4.3. im about to go nuts here. any advice would help and be greatly appreciated.
Click to expand...
Click to collapse
For info/pointers on how to root your NT see http://forum.xda-developers.com/showpost.php?p=31271965&postcount=240 and also http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31.
digixmax said:
For info/pointers on how to root your NT see http://forum.xda-developers.com/showpost.php?p=31271965&postcount=240 and also http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31.
Click to expand...
Click to collapse
thanks digimax, i have read that several times over and have tried everything i can think of. i have used different sd cards, different usb cables, usb ports on my machine. i even went out and bought a brand new 8 and 16GB class4 sds and still nothing. i have used win 32 disk imager, acronis dd, ubuntu live, and fedora core that i have dual boot on my machine. i have downloaded the image from 4 different sources( using alberts method) and tried each of them numerous times. is it possible that my NT is unrootable? would it help if i downgraded from 1.4.3? if anyone has a verified working link on an image ill try that. if i can get CWM going then i can take it from there as far as kernels and roms, its just getting to that point that is so frustrating
o0oXDAo0o said:
thanks digimax, i have read that several times over and have tried everything i can think of. i have used different sd cards, different usb cables, usb ports on my machine. i even went out and bought a brand new 8 and 16GB class4 sds and still nothing. i have used win 32 disk imager, acronis dd, ubuntu live, and fedora core that i have dual boot on my machine. i have downloaded the image from 4 different sources( using alberts method) and tried each of them numerous times. is it possible that my NT is unrootable? would it help if i downgraded from 1.4.3? if anyone has a verified working link on an image ill try that. if i can get CWM going then i can take it from there as far as kernels and roms, its just getting to that point that is so frustrating
Click to expand...
Click to collapse
Just to confirm: what you burn to the SD card (using win32diskimager) is the .img file extracted from inside the downloaded zip file, and not the zip file itself?
digixmax said:
Just to confirm: what you burn to the SD card (using win32diskimager) is the .img file extracted from inside the downloaded zip file, and not the zip file itself?
Click to expand...
Click to collapse
I extracted the zip which contained win32diskwhatever and the image file i used win32 in admin mode to write the image and create the partition on the sd card. im currently abandoning that route though and am just going to try breaking down and flashing CM10.1 on it. i saw a post where you had stated that that was an old way so im going to try something newer. i have all the files downloaded and have built the partitions using mini tool partition manager im copying them over now but i think it will be tomorrow before i try to flash ill let you know if it works, and just to be clear when i flash the CM10 on the sd card i can remove it and the NT will still boot CM10?
o0oXDAo0o said:
...
and just to be clear when i flash the CM10 on the sd card i can remove it and the NT will still boot CM10?
Click to expand...
Click to collapse
If you flash onto and run CM off an SD card (e.g., as described in http://forum.xda-developers.com/showpost.php?p=36685310&postcount=1), that CM10 SD card has to stay in the SD card slot in order for your NT to run CM10.
If you want to be able to run CM10 without an SD card you'd have to flash CM10 internally on EMMC (e.g., see http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123) to replace whatever ROM (stock or otherwise) you currently have.
Note thatSD-based installation and EMMC-based installation use different versions of ROM zip files which are not interchangeable, so make sure you pick the right version.
digixmax said:
If you flash onto and run CM off an SD card (e.g., as described in http://forum.xda-developers.com/showpost.php?p=36685310&postcount=1), that CM10 SD card has to stay in the SD card slot in order for your NT to run CM10.
If you want to be able to run CM10 without an SD card you'd have to flash CM10 internally on EMMC (e.g., see http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123) to replace whatever ROM (stock or otherwise) you currently have.
Note thatSD-based installation and EMMC-based installation use different versions of ROM zip files which are not interchangeable, so make sure you pick the right version.
Click to expand...
Click to collapse
ok i tried using the premade image and putting it on the sd card to boot from. i made sure card was flagged as primary active 0x0C LBA and it was set to boot( if that makes any sense, been up too long lol ) that didnt work. so i tried to build the card my self reading through several times and double checking as i went. still nothing when i try to boot up with the usb cable. i have been using the stock cable could that be a problem? this is what i came up with when the NT booted normal (attachment below) can you tell did i do something wrong? would it be easier to throw CM onto the eMMC? if so can you link me to a version of CM that would work on the NT 8GB? thanks in advance!
Personally, I had trouble booting & running SD cards. I'm convinced it wasn't hardware but my noobness! Since then I've always loaded only to emmc. I also had trouble going directly & straight to CM10 roms from the B&N 1.4whatever OS.
So, looking for a recovery + rom that matched, I used Indirect's app to get cwm 5, then had no trouble loading a CM9 rom (all to emmc). Once CM9 was up & running good, I used Goo Manager to load an updated TWRP recovery suitable for CM10, then Cm10.1, etc. That's what worked for me & to this day I see no need to boot from SD's. Just me tho.
Sent from my Nexus 7 using Tapatalk 2
o0oXDAo0o said:
ok i tried using the premade image and putting it on the sd card to boot from. i made sure card was flagged as primary active 0x0C LBA and it was set to boot( if that makes any sense, been up too long lol ) that didnt work. so i tried to build the card my self reading through several times and double checking as i went. still nothing when i try to boot up with the usb cable. i have been using the stock cable could that be a problem? this is what i came up with when the NT booted normal (attachment below) can you tell did i do something wrong? would it be easier to throw CM onto the eMMC? if so can you link me to a version of CM that would work on the NT 8GB? thanks in advance!
Click to expand...
Click to collapse
If booting of a pre-made image does not work, there might be a flaw with your NT that precludes it from booting off SD card, and if this is true I am not aware of any way to root or flash stock ROM onto emmc if your NT is currently running stock.
digixmax said:
If booting of a pre-made image does not work, there might be a flaw with your NT that precludes it from booting off SD card, and if this is true I am not aware of any way to root or flash stock ROM onto emmc if your NT is currently running stock.
Click to expand...
Click to collapse
ok that doesnt really make sense, i havent seen anyone else complaining about having trouble and not being able to get it to go at all. im not saying impossible more improbable i guess, anything is possible. i have been working with my wifes NT today and im not having any luck getting hers to boot android or root. ray waldo said that team b has a version of cm7 that will boot without root but i cant even get that to come up. her NT is 8GB as well. if there is some kind of work around that anyone knows of please share. id be willing to donate if you guys think of a fix. thanks
o0oXDAo0o said:
ok that doesnt really make sense, i havent seen anyone else complaining about having trouble and not being able to get it to go at all.
Click to expand...
Click to collapse
It's indeed true that there really doesn't seem to be anyone not being able to get their NT to boot from sd, provided they follow suggestions. So I repeat the questions I asked in your own topic (and please, try to stay within one thread to maximize the chance of getting this sorted!):
1. Are you 100% you are dealing with a Tablet and not a Color? (Model no fr Tablet 8GB is 250A)
2. Are you using a SanDisk class 4 sd card? (And burn it according to instructions)
3. Have you tried turning the device off, inserting the card and then insert USB cable connected to power (not computer!)
asawi said:
It's indeed true that there really doesn't seem to be anyone not being able to get their NT to boot from sd, provided they follow suggestions. So I repeat the questions I asked in your own topic (and please, try to stay within one thread to maximize the chance of getting this sorted!):
1. Are you 100% you are dealing with a Tablet and not a Color? (Model no fr Tablet 8GB is 250A)
2. Are you using a SanDisk class 4 sd card? (And burn it according to instructions)
3. Have you tried turning the device off, inserting the card and then insert USB cable connected to power (not computer!)
Click to expand...
Click to collapse
Another thing to try is using a different SD card reader/writer.
asawi said:
It's indeed true that there really doesn't seem to be anyone not being able to get their NT to boot from sd, provided they follow suggestions. So I repeat the questions I asked in your own topic (and please, try to stay within one thread to maximize the chance of getting this sorted!):
1. Are you 100% you are dealing with a Tablet and not a Color? (Model no fr Tablet 8GB is 250A)
2. Are you using a SanDisk class 4 sd card? (And burn it according to instructions)
3. Have you tried turning the device off, inserting the card and then insert USB cable connected to power (not computer!)
Click to expand...
Click to collapse
I've been having problems with my 8gb tablet as well. I have tried all three of your suggestions above. Is there any way to set the 8gb tablet back to a later version like 1.4.0? I've only seen resets for the 16gb.
JayKenobiZX said:
I've been having problems with my 8gb tablet as well. I have tried all three of your suggestions above. Is there any way to set the 8gb tablet back to a later version like 1.4.0? I've only seen resets for the 16gb.
Click to expand...
Click to collapse
The repart .img works on 8GB as well.
Sent from my BNTV600 using Tapatalk 4
asawi said:
The repart .img works on 8GB as well.
Sent from my BNTV600 using Tapatalk 4
Click to expand...
Click to collapse
And where can I find that?
Use the search function.
ok through a series of unfortunate events and through no fault of my own i now no longer have a NT but i do have a nook color now. for those of you wondering i DID have a tab but the screen ended up mysteriously shattering. wife was trying to be nice and ordered me what she believed to be a tablet but a color shipped instead. still trying to decide if i want to do anything with that but thats for a different thread. so i still dont know what happened the tab wouldnt boot CM10 before it broke ( or after either lol ) but i pulled the sd out and tried it again in my wifes tab using the wall charger to jumpstart it and it booted CM right up. so i guess i just got the crap draw out of the nooks we bought at the exact same time. still trying to figure out how i can pin this on best buy for selling me a faulty device lol, but i just wanted to say thanks for everyones help and feedback. when i threw the sd into my wifes tab it loaded CWM and CM10 just fine. ordered her a class 6 san disk sd to put in it to see if that helps with some of the lag issues.:good:
Ok, so I'd like to piggyback off this before starting my own thread. I have a bunch of Nook Colors that I have no problem booting off of SD cards for my kids. Now the 8gb Tablet is proving much harder for me. I've redone the SD card method 4x by two different methods and I keep getting the same result: It boots up fine, allows me to create the google account and even dowload apps. However, out of nowhere it will reboot and then I am stuck on the CM10 boot screen that just loops forever. I am repartioning a 16 GB card, making it active, windisk img the zip file to the card fine.... Does my symptom sound specific of something? Let me know. Thanks!
o0oXDAo0o said:
ok through a series of unfortunate events and through no fault of my own i now no longer have a NT but i do have a nook color now. for those of you wondering i DID have a tab but the screen ended up mysteriously shattering. wife was trying to be nice and ordered me what she believed to be a tablet but a color shipped instead. still trying to decide if i want to do anything with that but thats for a different thread. so i still dont know what happened the tab wouldnt boot CM10 before it broke ( or after either lol ) but i pulled the sd out and tried it again in my wifes tab using the wall charger to jumpstart it and it booted CM right up. so i guess i just got the crap draw out of the nooks we bought at the exact same time. still trying to figure out how i can pin this on best buy for selling me a faulty device lol, but i just wanted to say thanks for everyones help and feedback. when i threw the sd into my wifes tab it loaded CWM and CM10 just fine. ordered her a class 6 san disk sd to put in it to see if that helps with some of the lag issues.:good:
Click to expand...
Click to collapse
marmasatt said:
...
Now the 8gb Tablet is proving much harder for me. I've redone the SD card method 4x by two different methods and I keep getting the same result: It boots up fine, allows me to create the google account and even dowload apps. However, out of nowhere it will reboot and then I am stuck on the CM10 boot screen that just loops forever. I am repartioning a 16 GB card, making it active, windisk img the zip file to the card fine.... Does my symptom sound specific of something? Let me know. Thanks!
Click to expand...
Click to collapse
I encountered this same problem for the first time yesterday when I tried out a CM10.2 SD build.
If you are using 10.2 you might want to go back to using 10.1 for a while longer.
Yeah, but what if I'm on CM 10.1? I used one build from June (2x) then one from Aug (2x) and now have the same symptoms. This does not sound indicative of something specific? Like aren't some 8gb tablets troublesome from SD? Or is this a user error still of some sort?
digixmax said:
I encountered this same problem for the first time yesterday when I tried out a CM10.2 SD build.
If you are using 10.2 you might want to go back to using 10.1 for a while longer.
Click to expand...
Click to collapse

Bricked bad

Hi I was running jellybean on my NT and it was awesome.After an update I got the E cant load message long story short. My OS is gone I have tried Adams method I tried Meg's method. I followed Ray Waldo and. Veronica . By the way thank all of you guys for your hard work. Nothing has worked. It is not the first time I have rooted a device I read and read and try to follow directions. I have screwed up my NT .Is there anyway to get a remote session with someone that can help me
Sent from my LG-MS770 using xda app-developers app
stillblaze01 said:
Hi I was running jellybean on my NT and it was awesome.After an update I got the E cant load message long story short. My OS is gone I have tried Adams method I tried Meg's method. I followed Ray Waldo and. Veronica . By the way thank all of you guys for your hard work. Nothing has worked. It is not the first time I have rooted a device I read and read and try to follow directions. I have screwed up my NT .Is there anyway to get a remote session with someone that can help me
Sent from my LG-MS770 using xda app-developers app
Click to expand...
Click to collapse
Did you try this thread? http://forum.xda-developers.com/showthread.php?t=1605664
I will check it out
sagirfahmid3 said:
Did you try this thread? http://forum.xda-developers.com/showthread.php?t=1605664
Click to expand...
Click to collapse
Have not been online in a minute But I am going to check it out right now Thank you!
done that.
Yea I tried that I must have been doing it wrong though I would get everything built but it would be in my micro sdcard not on my nook. I am sure I am doing something wrong just cant figure out what. Anyway thanx for the thread!!!!
To get help, you need to provide more info: e.g., what error condition/message you got when trying out the various fixes.
More specific....
digixmax said:
To get help, you need to provide more info: e.g., what error condition/message you got when trying out the various fixes.
Click to expand...
Click to collapse
First thanks for taking time to read my post. How I got in my position, cant tell ya . I should of done more research but to tell you the truth I was in love with my crazy cool Nook Tablet running JB and I got careless. Adams Ubuntu sd card it would load a lit black screen and no more left it overnight, nothing .Megd repart .img I would get the red X as soon as it popped up. I never created did the windows version when I tried parted I never got the error just some messed up version of what used to be a partition I had use of adb when in cwm recovery no serial # just 00 Icant mount anything followed Veronicas threads got Ubuntu on virtual box I would be able to do some steps and then I would not be able to load something like sdcard . I thought I had gotten lucky when I found the recovery .img with the tools already loaded. By The way THANK YOU soooo much for taking the time to make cool @SS stuff and let us play!! well I tried loading scripts to sdcard mounts and what not was not getting any thing out of my sdcard. I did the steps were you erase the partitions then remake everything my partitions looked sweet when I reboot nothing sdcard has the partitions and I ast thing I did was used the step to erase that was a few weeks ago I had given up on it .then as a long shot decided to pm Veronica and ask for some help. started trying stuff again loaded cyanoboot from there loaded twrp for some reason I lost my adb I cant load drivers but I can LOad some .img files from cyanoboot so my partitions and mounts are gone adb not working (but I can fix that )I have a sixteen gb nook tablet 1.4.3 rooted with nook and zergy. Is their a rom that I can load from cyanoboots boot menu that will fix everything. wishful thinking
look what i found
I don't know if this helps but I did a cwm back up brfore getting bricked and then I copied my sdcard to my gf's pc I forgot all about it she pointed it out
stillblaze01 said:
...
I did the steps were you erase the partitions then remake everything my partitions looked sweet when I reboot nothing
...
Click to expand...
Click to collapse
If you erased (without first backing up) the 2 partitions /rom and /factory then you have wiped out your NT's factory-installed individual device data (MAC address, security encryption keys, serial no., etc.) without which the NT will not function. The backup made using CWM only covers the 4 partitions /boot, /recovery, /system, and /data, so you won't be able to restore this data using CWM backup. See http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31 for more info.
So trash it.?
digixmax said:
If you erased (without first backing up) the 2 partitions /rom and /factory then you have wiped out your NT's factory-installed individual device data (MAC address, security encryption keys, serial no., etc.) without which the NT will not function. The backup made using CWM only covers the 4 partitions /boot, /recovery, /system, and /data, so you won't be able to restore this data using CWM backup. See http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31 for more info.
Click to expand...
Click to collapse
Ok so no Nandroid to the rescue I have the serial# with the original paper work ,mac address I should be able to get from my routers history I am grasping at straws here ! I would hate to throw away it was my source of entertainment .I let my daughter use my laptop. work is slow and I cant afford to get another one. well can it be turned into something else another model tablet a game emulator
Any way I appreciate you getting back to me if its trashed its my fault for not asking for help before I was trying to use what the devs had in the forum and not be the noob that gets told to do a better search. lol. Hopefully I will get some good news. If not well thank all of you
If you have an SD card on hand I'd suggest that you first burn a SD image of Succulent's CM10.1 (http://iamafanof.wordpress.com/2013/02/18/cm10-1-jellybean-android-4-2-2-for-nook-tablet-0218/) or CM10.2 (http://iamafanof.wordpress.com/2013...id-4-3-for-nook-tablet-imgsdc-boot-09aug2013/) and see if your NT would boot and run CM off SD card.
If it does boot and run off SD then the device data is probably intact and you can proceed to flash stock or CM internally (or simply just continue to run CM off SD).
If it doesn't I'd suggest you contact @AdamOutler for help with restoring a copy of romdata.zip to your NT's /factory partition.
digixmax said:
If you have an SD card on hand I'd suggest that you first burn a SD image of Succulent's CM10.1 (http://iamafanof.wordpress.com/2013/02/18/cm10-1-jellybean-android-4-2-2-for-nook-tablet-0218/) or CM10.2 (http://iamafanof.wordpress.com/2013...id-4-3-for-nook-tablet-imgsdc-boot-09aug2013/) and see if your NT would boot and run CM off SD card.
If it does boot and run off SD then the device data is probably intact and you can proceed to flash stock or CM internally (or simply just continue to run CM off SD).
If it doesn't I'd suggest you contact @AdamOutler for help with restoring a copy of romdata.zip to your NT's /factory partition.
Click to expand...
Click to collapse
Well I have not been able to t get far this route but here it goes
result
stillblaze01 said:
Well I have not been able to t get far this route but here it goes
Click to expand...
Click to collapse
ok the only thing I have been able to get to work have been recoveries. tried to boot Cm 10.2 sdcard you recommended the sd card did not boot so I used one that loads up CYANOBOOT went into boot menu took that sd card out put in the rom sd go into boot. My nook tablet's screen went black lit internally. Is it loading rom? or am I SOL?
When you boot up the CM10 SDcard it should boot into Cyanoboot which in turn should load SD CM10 ROM (and should indicate that it's "loading SDC ..."), then the screen should black out for up to about 3 min before boot-animation (counter-rotating CM circles) appears.
If Cyanoboot does not appear then the SD card is not bootable (see Notes section of http://forum.xda-developers.com/showpost.php?p=36685310&postcount=1 for some potential causes). Also you might have to boot the NT from its power off by inserting a powered USB cable.
If Cyanoboot loads SDC ROM but the screen goes dark for over 5 min then the CM10 boot has failed.
Tried and tried no luck
Thank you for your time
Sent from my LG-MS770 using xda app-developers app
replaced nook
digixmax said:
When you boot up the CM10 SDcard it should boot into Cyanoboot which in turn should load SD CM10 ROM (and should indicate that it's "loading SDC ..."), then the screen should black out for up to about 3 min before boot-animation (counter-rotating CM circles) appears.
If Cyanoboot does not appear then the SD card is not bootable (see Notes section of http://forum.xda-developers.com/showpost.php?p=36685310&postcount=1 for some potential causes). Also you might have to boot the NT from its power off by inserting a powered USB cable.
If Cyanoboot loads SDC ROM but the screen goes dark for over 5 min then the CM10 boot has failed.
Click to expand...
Click to collapse
hey wantd to thank you for the help you provided, my old nook was possesed wound up breaking charging port frying the battery lol total dissaster... believe it or not all my devices are rooted and rommed that nook just got away from me. long story short bought the same model 1.4.3 16 gb off of craigslist for $ 40 had iy running cm7 10 minutes after i got it home ran for a day installed Succulents cm 10.0 then downloaded cm 10.1.3 from cyanogenmod had to flash gapps twice besides adb being offline everything is groovy!I am not sure if its repartitioned rite I have 5.50 gb internal 7.45.45gb internal my big microsdc are all corrupt so im using a 2gb (work is slow so gonna have to wait for a 16gb). Is there anything cool I can add mods kernel;to make it even better shoot me a message or reply if anything comes to mind

Categories

Resources