I've searched everywhere but I cannot get the answer to whether or not I can flash any ROM on a Windows Phone with a Goldcard. I recently installed a custom ROM using one. But that was just for downgrading the SPL.
I want to know if I can simply use any nbh file to flash a ROM?
Related
Guys , some people are reporting that they are unable to revert to stock rom after flashing custom rom.
If you want to save your phone , then i highly recommend you to make a complete backup before flshing stock rom
go to cwm recovery and select backup/restore then backup (it will make your stock rom backup)
whenever you want to revert , go again to clockworkmod recovery and select restore under, backup/restore option
now last and most important thing to run stock rom ---> flash stock kernel using fastboot method
first grab stock kernel to do that , download your phones stock firmware from here = http://forum.xda-developers.com/showthread.php?p=10885406#post10885406
using 7zip extract kernel.sin file from .ftf firmware file
connect your phone in fastboot mode and run this command
fastboot flash boot kernel.sin
I'm doing it again and again without any problem.. just be sure to flash stock kernel before flashing stock rom.
thanks, i will try this method too
first flash stock kernel , then using flashtool flash firmware , am i right ?
Stock kernel (kernel.sin) is included in the package (of official stock firmware). So everytime you flash an official stock firmware, kernel.sin is also flashed. No need to flash kernel.sin before flashing stock firmware. Correct me if im wrong.
I also think same , i tried that method by noooooob and it worked too
hello, can someone give me a link to a tutorial on how to install CWM Recovery on our x-ray? do i have to unlock bootloader first before installing CWM? thanks
lets try the Cynaogen
kizsleg said:
hello, can someone give me a link to a tutorial on how to install CWM Recovery on our x-ray? do i have to unlock bootloader first before installing CWM? thanks
Click to expand...
Click to collapse
yes you have to unlock boot-loaders first
i recommend to unlock by this method = http://androidflip.com/unlock-xperia-phones-bootloader-without-losing-drm-data-track-id-working/
if you want to install clockwork mod recovery then follow this = http://forum.xda-developers.com/showthread.php?t=1384200
Install CWM without unlocking bootloader
You don't need to unlock the boot loader to install CWM.
Follow instructions here to root First
http://forum.xda-developers.com/showthread.php?t=1320350
Install CWM using this tool
http://forum.xda-developers.com/showthread.php?t=1346190
This is how I did it on my Ray
I always considered flashing with Wotanserver to be the best way to go back to stock. It basically takes care of everything. Sure, you'll have to root again afterwards, but that's not exactly very hard.
wotan server is also a good choice
How can i revert back to stock rom from custom rom if i havent made any backups of stock rom??
elf.rb said:
How can i revert back to stock rom from custom rom if i havent made any backups of stock rom??
Click to expand...
Click to collapse
download firmware which you have before installing custom rom, then flash it using flashtool.
Hey everyone, I've been using my hox+ rooted for some time now, never flashed a ROM and was wondering if I update to the new att software will I lose root?
Yes. Just make sure you have a custom recovery and flash the root installer zip. Or if you have TWRP, after a the flash, it will ask to install root.
Hey thanks for the response, I'm running twrp 2.4 the thing is I don't know whether to to let the phone update through its regular way of updating or do I flash this http://forum.xda-developers.com/showthread.php?t=2235248, the problem with flashing this is I don't
Know how to flash boot IMG. Sorry I'm a noob any help would be greatly appreciated.
Use this command in fastboot.
fastboot flash boot /location/of/boot.img
If your bootloader is unlock and your phone has a custom Recovery, the official AT&T update won't install on your phone. If you want the update, or you wait for a custom ROM with the update to be available, or you relock bootloader, and flash the latest RUU to recover the original state of your phone. Then you can still unlock with the same token and install a custom recovery to root your device.
Thanks much fellas, you've been a great help!
So, never had a Sony-Device, the guides and instructions here are a bit unclear to me.
As far as i understood before going custom:
Downgrade to .532 with flashtool -> run BackupTA -> upgrade to latest again (rly neccessary?) -> then unlock Bootloader
Pretty straight forward up until here.
From there on i can use [NUTS]s XZDualRecovery if i want to stay on stock-kernel and flash custom roms frem there without any problem as far as i understood.
Is this correct?
But what if i want to use a custom kernel at some point?
DooMKernel for example is flahsed via Fastboot, but only compatible with Stock-Sony-Roms
PimpedKernel for example on the other hand is CM-based only and only uses a recovery flashable zip
I'm a little bit confused because of that.
Is a Kernel and / or recovery included in every ROM? (Edit: Yep Kernel is..)
Can i just use [NUTS] recovery and then flash any ROM / Kernel trough it? And afterwards a custom Kernel if the one included in ROM (if any?) lacks any features i want?
competent devs who maintain roms for this phone would include a recovery in their package
slimrom does this and i don't have to worry about losing trwp recovery
alia5 said:
So, never had a Sony-Device, the guides and instructions here are a bit unclear to me.
As far as i understood before going custom:
Downgrade to .532 with flashtool -> run BackupTA -> upgrade to latest again (rly neccessary?) -> then unlock Bootloader
Pretty straight forward up until here.
From there on i can use [NUTS]s XZDualRecovery if i want to stay on stock-kernel and flash custom roms frem there without any problem as far as i understood.
Is this correct?
But what if i want to use a custom kernel at some point?
DooMKernel for example is flahsed via Fastboot, but only compatible with Stock-Sony-Roms
PimpedKernel for example on the other hand is CM-based only and only uses a recovery flashable zip
I'm a little bit confused because of that.
Is a Kernel and / or recovery included in every ROM? (Edit: Yep Kernel is..)
Can i just use [NUTS] recovery and then flash any ROM / Kernel trough it? And afterwards a custom Kernel if the one included in ROM (if any?) lacks any features i want?
Click to expand...
Click to collapse
The downgrading is no longer necessary, use the easyroot tool. Or use the dualrecovery installer for locked bootloaders then flash superuser zip from recovery. Once you have it rooted then back up TA and unlock bootloader. You should be able to flash boot.img from flashtool, if you wanted to download a rom and pull it from zip. I mention that because most roms only have one recovery, so if you flash the img from the rom you want to install first with flashtool you could make a backup that could be restored with new recovery. One other thing that I learned the hard way is a backup made before unlocking bootloader will relock it if restored.
No downgrading, just root and back up TA, great
So i need to flash boot.img from the ROM every time i want to install a new ROM? Or just the first time going from stock to custom? Or just if i have twrp n current rom and the rom i wanna flash is only compatible with CWM?
alia5 said:
No downgrading, just root and back up TA, great
So i need to flash boot.img from the ROM every time i want to install a new ROM? Or just the first time going from stock to custom? Or just if i have twrp n current rom and the rom i wanna flash is only compatible with CWM?
Click to expand...
Click to collapse
Here is a brand spanking new guide to check out that is up to date.
http://forum.xda-developers.com/xperia-z-ultra/general/guide-everything-root-4-4-4-t2938098
I will try to put forth an example to try and demonstrate what I trying to convey in regards to flashing boot.img.
Example.... You are on a rom that contains CWM and you are going to flash a rom that contains TWRP and you wish to have a backup of first rom that could be restored you would flash the img. with TWRP then make backup. Another option would be to just go ahead and use CWM to make backup but you would need to flash that img. in order to be able to restore. I think most roms can be flashed from either recovery at the moment, the concern is your backup being compatible with whichever one is in your current rom.
So, in the boot.img is Kernel+Recovery, alright, and i only need to worry about flashing boot.img für backup reasons.
Pretty much answers what i was wondering, thanks guys
Title.
I'm looking for this too ..
No there isn't. Stock recoveries will only flash versions signed by the oem
Unlock the device's bootloader and have it installed in the custom rom. I want to install stock rum now.but, the flashtool application does not recognize the software and does not install stock rom.
Does zip software downloaded from XperiaFirm be flashing directly with twrp?
Thanks,some english,google translate