I would like to have my phone in English language, but with different (Czech) regional setting - ie different date format (with dots instead of / to divide date and so on). But I couldnt find any way how to change it in Settings. Is it possible at all? If I remmember correctly it was possible on SGS3. Coming from iOS, so maybe I'm missing something?
Thanks for any advice!
Related
hello all,
im a frequent to this site, although i dont own a xda.. but i like what you guys accomplished till now ...
now.. my question is: in jeff's kitchen, there is an option "Lock all keys except power button while off " which works for pp2k2 devices.
anyone can tell me how this tweak works? is it a special programm or what?
thanks in advance, banshee
No, it is not a special programm, but you can also set it manualy in your settings of the xda. I think it will only set a Option in the registry...
Regards
Stefan
It's a registry setting. "Funny" thing is that WM2003 stores the setting in the same place in the registry, but somehow resets this registry value to its default when it cold-boots, which is why I made the setting "PPC2002 only".
hmm thats a pitty... i would have liked to enable the same setting on my ipaq...
could you show me where this is located?
im not in the position to create my own roms at the moment - but id still like to try it
As the "Lock Buttons" facility is under MORE on PHONE>OPTIONS in PPC2002 (along with auto-answer) and MORE does not exist under WM2003 (at least not with a 4.00.11/4.21 combination) is it possible to manually add a setting in the registry to activate auto-answer? If so, what? What is the entry for PPC2002? Could we try that?
I know you can set the sound to AUTOMATIC so its on vibrate for appointments in the calendar...but I can only seem to find that setting by going to the SETTINGS tab on the TF3D screen. I was trying to cleanup the tabs I don't use often (using the TF3D Advance Config program), and I think I can do away with the SETTINGS tab completely if I can find another way to set the sounds to AUTOMATIC. I have searched almost all of the icons in the START / SETTINGS area, but all I can find there are ways to change the ringer or change the type from ring to silent etc. Is there a way to set the ring type to AUTOMATIC without going through the TF3D settings tab?
Thanks!
heweaver said:
I know you can set the sound to AUTOMATIC so its on vibrate for appointments in the calendar...but I can only seem to find that setting by going to the SETTINGS tab on the TF3D screen. I was trying to cleanup the tabs I don't use often (using the TF3D Advance Config program), and I think I can do away with the SETTINGS tab completely if I can find another way to set the sounds to AUTOMATIC. I have searched almost all of the icons in the START / SETTINGS area, but all I can find there are ways to change the ringer or change the type from ring to silent etc. Is there a way to set the ring type to AUTOMATIC without going through the TF3D settings tab?
Thanks!
Click to expand...
Click to collapse
Post this here
Please dont start new threads for things such as this. Especially in the ROM development section.
apologize...
I apologize for posting here...I had been up for so long, I thought I was in another Raphael forum. I did search and found nothing even close to my question, which is why I started a new thread instead of adding a reply to an existing one. I will search a lot more since I have time and try to post an appropriate reply in another thread, in another forum. Sorry for the trouble. If you are able to delete this entire thread, go ahead and do so.
Thanks, and sorry again!
Please help!!!
Hi i just flashed new official rom: RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
released on 11 oct 2010 by htc. There is no longer screen setting in the options menu?
I have located in the registry under GUI where to place the entries 1 folder called Font smothing and one called clear type but what entries do i need to make to enable them both?
100. Enable Align Screen Calibration in Settings
Certain US roms or custom roms do not have the screen calibration option showing in All Settings, System, Screen. This allows you to tap on crosshairs to calibrate the screen. To enable it just use the registry tweak below:
HKLM\ControlPanel\Pen and change from 1 to 0.
xnifex said:
100. Enable Align Screen Calibration in Settings
Certain US roms or custom roms do not have the screen calibration option showing in All Settings, System, Screen. This allows you to tap on crosshairs to calibrate the screen. To enable it just use the registry tweak below:
HKLM\ControlPanel\Pen and change from 1 to 0.
Click to expand...
Click to collapse
Yes But even then font smothing is not visible, that was only availiable through the quick preferences-screen not in all settings screen in previous roms
just dont want to have flash back to an old rom then back just for these settings after spending most of a day re-installing programs back on and changing settings to find these two missing.
where exactly was the font smoothing setting? i don't think i've ever seen anything labeled like that. just cleartype which says "smoothes the edges of screen fonts"
reg for cleartype is....
create the registry branch
hklm/system/GDI/CLEARTYPE
it doesn't need any keys or values, the branch existing is enough to turn on cleartype
hklm/system/GDI/CLEARTYPE already exists yet is not activated so how do you enable it? what entries need to be made in this folder?
font smoothing setting is also under hklm/system/GDI/ the same again this entry exists what entries need to be made in this folder?
in cleartype settings is only offonrotation
some apps require cleartype turning on within them. resco explorer for instance. scan your registry for "cleartype" there are a few hits.
Update half way there
Managed to get cleartype working in all progs and enabled thanks to another forum,
Just now need help to get font smothing working
how you did it?
How you managed to enable clear type in new rom. Pls help i cannot.
anttaz said:
hklm/system/GDI/CLEARTYPE
Click to expand...
Click to collapse
nothing else goes in that folder, the folder itself is all that is required to tell winmo to use cleartype. (At least thats how its supposed to work, thats how it works on non 3.14 roms)
Hi all,
using a physical Bluetooth Keyboard is a good choice, but only if you have the right Keyboard-Layout.
As I am not living in US (but instead in Europe/Germany) I am strongly looking for a way to change the used Keyboard Layout. Is there an easy way to change it to get the ability to use a typical German (Hardware) Keyboard on the Atrix 4G (AT&T Version)?
Can I modify: /system/usr/keylayout/evfwd.kl
What are the possible risks?
Which file I have to change for the Webtop mode?
BTW: I tried the App “Keyboard Language” which doesn’t work.
wanted Layout see here: en.wikipedia.org/wiki/Keyboard_layout#Germany_and_Austria_.28but_not_Switzerland.29
I use SwiftKey. There are options in the settings to change it
Sent from my MB860 Atrix using XDA App.
Hi,
thanks for your answer, but...
Swiftkey is a Software Keyboard, but I am talking about an Bluetooth Hardware keyboard...
The question is: How I can change the mapping of the keys on the Hardware...
Is there any kind of solution for this problem?
Thanks a lot!
Possible Solution for Keyboard Layout for external USB-Keyboard with Multimedia Dock
Hi!
I had the problem that the external GERMAN USB Keyboard couldn't be used as a GERMAN keyboard. And changing the setting to german wouldn't work.
I found this
android-hilfe.de/zubehoer-fuer-das-motorola-atrix/157808-webtop-problem-mit-tastaturlayout.html
and i somehow solved my problem by doing this:
copy "kbd_de_basic.kcm.bin" from /system/usr/keychars/ to /data/usr/keychars/ and rename it to (the already existing!! - so, better make a backup)
"usb_keyboard_102_en_us.kcm.bin" and leave the setting of external keyboard to "US International" (or similar..). Reboot.
For me, it worked. You'd better uncheck all the options at the "physical keyboard" settings menu.
cheers!
Hello everyone.
I've recently bought my dad the prime with a keyboard dock and I can't find a quick and easy way to change the input language of the keyboard when it's docked.
There is an option to change the device's language to our local one (Hebrew if that matters), but then it changes everything to Hebrew.
I just want the device's language to be English and have something like alt+shift to switch between the languages when it's docked.
However, so far it's either stuck on English (if the device's language is set to English), or alternates randomly between Hebrew and English (probably depends on the context of the text) with no real way to change it.
Is this a known issue? Is there a way to solve this?
Well, apparently ctrl+space does the trick when the keyboard is docked, at least for me.
Eternal Thought said:
Hello everyone.
I've recently bought my dad the prime with a keyboard dock and I can't find a quick and easy way to change the input language of the keyboard when it's docked.
There is an option to change the device's language to our local one (Hebrew if that matters), but then it changes everything to Hebrew.
I just want the device's language to be English and have something like alt+shift to switch between the languages when it's docked.
However, so far it's either stuck on English (if the device's language is set to English), or alternates randomly between Hebrew and English (probably depends on the context of the text) with no real way to change it.
Is this a known issue? Is there a way to solve this?
Click to expand...
Click to collapse
if you go to ASUS keyboard setting, and only check Hebrew keyboard (without English Keyboard), you can simply switch back and forth between English and Hebrew by pressing alt key which is right next to space bar.
when alt key is pressed, it shows which keyboard has activated via little dialog box on the center of the screen.
This is the control + shift hassle free of doing it.