Like the title says, my phone is stuck on the CM10 boot animation after flashing. I have s-off after using DirtyRacun. I have tried to fastboot-flash the boot.img file. I have waited 20+ mins for this thing to boot, with no luck. I have been flashing and reflashing all day without any luck. Any insight or suggestions would be greatly appreciated.
krgross said:
Like the title says, my phone is stuck on the CM10 boot animation after flashing. I have s-off after using DirtyRacun. I have tried to fastboot-flash the boot.img file. I have waited 20+ mins for this thing to boot, with no luck. I have been flashing and reflashing all day without any luck. Any insight or suggestions would be greatly appreciated.
Click to expand...
Click to collapse
Did you do factory reset and full wipes before reflashing? What version twrp you running?
Sent from my EVO using xda premium
I had the problem also. Clean your case, that worked for me.
Sent from my HTC One X using xda app-developers app
steefbecker said:
I had the problem also. Clean your case, that worked for me.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Do you mean cache? because I dont see why a dirty case will prevent a phone from booting up
gmugrad04 said:
Did you do factory reset and full wipes before reflashing? What version twrp you running?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I RUU'd my device as part of the new DirtyRacun process, so a full reset was performed. I did wipe things during the flash as well. I am running TWRP 2.2.1
krgross said:
I RUU'd my device as part of the new DirtyRacun process, so a full reset was performed. I did wipe things during the flash as well. I am running TWRP 2.2.1
Click to expand...
Click to collapse
I would update to twrp 2.3.1.0 and give it another shot.
Sent from my EVO using xda premium
gmugrad04 said:
I would update to twrp 2.3.1.0 and give it another shot.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
You sir, are awesome. I have been fighting this for days and that did the trick. Thanks a ton
krgross said:
You sir, are awesome. I have been fighting this for days and that did the trick. Thanks a ton
Click to expand...
Click to collapse
Glad it worked :thumbup:
Sent from my EVO using xda premium
How do u update to twrp 2.3.1.0 from the device itself is there a flashable zip to do so... From recovery ? No real access to a comp at the moment
I have the twrp that regawmod installs
I'm on.hboot 1.19 got unlocked with s on.
SAME PROBLEM AFTER WIPES CM10 SITS ON BOOTLOGO NEVER BOOTS
Sent from my EVO using xda app-developers app
---------- Post added at 11:44 PM ---------- Previous post was at 11:39 PM ----------
I FOUND A.TWRP 2.3.1.0 OLYMPUS ZIP
UNDER ATRIX FOROM, WOULD THAT BE FINE TO FLASH ON THE EVO LTE TO GET THE LATEST TWRP OR SINCE IT'S FOR MOTO ATRIX SHOULD I NOT...
Sent from my EVO using xda app-developers app
Related
Please help! Want to flash jb rom but stuck on 1.58
Sent from my PG86100 using xda premium
You have to get s-off and downgrade boot. Lots of guides on how to do this. Try searching.
Sent from my PG86100 using xda app-developers app
Have s-off but no luck in finding downgrade hboot
Sent from my PG86100 using xda premium
demar01 said:
Have s-off but no luck in finding downgrade hboot
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Here are the CDMA hboots. http://forum.xda-developers.com/showthread.php?p=30014044
Here's a guide on how to flash an AOSP ROM. http://forum.xda-developers.com/showthread.php?t=1930770
Sent from my PG86100 using xda app-developers app
Thanks a lot fellas.
Sent from my PG86100 using xda premium
Okay I really give up! I've done everything. Downgrade, swipe, flash and nothing. Get stuck on boot loop. The only rom it picks up is SOS M.
Sent from my PG86100 using xda premium
demar01 said:
Okay I really give up! I've done everything. Downgrade, swipe, flash and nothing. Get stuck on boot loop. The only rom it picks up is SOS M.
Click to expand...
Click to collapse
Which hboot did you flash? Have you flashed the latest (2.89.651.2) firmware? Did you use 4EXT recovery and "format all partitions except SD card"?
ramjet73
ramjet73 said:
Which hboot did you flash? Have you flashed the latest (2.89.651.2) firmware? Did you use 4EXT recovery and "format all partitions except SD card"?
ramjet73
Click to expand...
Click to collapse
have you searched? can you read? am i overreacting? there are many guides.... ;(
Ramjet, I flashed hboot 1.50 and I'm using 4 ext recovery. Now about the firmware, do I need to flash the latest? The crazy thing is, I had lens jb rom and working great. But the Google voice was getting on my nerves. So I thought it was the rom. I flashed back to SOS M thinking I can get rid of goggle voice and still there. Well long story short, I disable Google voice and now when I try to flash back lens jb rom, it stays on boot loop.
Sent from my PG86100 using xda premium
demar01 said:
Ramjet, I flashed hboot 1.50 and I'm using 4 ext recovery. Now about the firmware, do I need to flash the latest? The crazy thing is, I had lens jb rom and working great. But the Google voice was getting on my nerves. So I thought it was the rom. I flashed back to SOS M thinking I can get rid of goggle voice and still there. Well long story short, I disable Google voice and now when I try to flash back lens jb rom, it stays on boot loop.
Click to expand...
Click to collapse
It would be a good idea to update to the current firmware (from the 2.89.651.2 build) if you haven't already, but I doubt that's your problem. Make sure to do a "format all partitions except SD card" in 4EXT right before flashing the JB ROM. Do not do a superwipe script as the latest AOSP ROM's don't seem to like that.
ramjet73
Thanks jet
Sent from my PG86100 using xda premium
Hi,
searched XDA but cannot find the correct answer.
I have a TF201 running on blackbean 7.1 (4.2)
I want to sell it because I hardly us it.
I know I cannot relock the bootloader but is there a way to bring the prime back to stock?
Stock rom and option to have OTA ?
Please help me with clear steps!
Thnx in advance
Ralph
twistednl said:
Hi,
searched XDA but cannot find the correct answer.
I have a TF201 running on blackbean 7.1 (4.2)
I want to sell it because I hardly us it.
I know I cannot relock the bootloader but is there a way to bring the prime back to stock?
Stock rom and option to have OTA ?
Please help me with clear steps!
Thnx in advance
Ralph
Click to expand...
Click to collapse
There is no way to relock the bootloader, and no way to get OTA updates after unlocking.
But you can bring the prime back to stock
Just go to the Asus site and download the latest ROM it is software # 10.4.2.18 then extract the zip file copy and paste the 10.4.2.18 zip file in your internal or external SD card boot into recovery wipe data factory reset then flash the zip file.
It will bring your prime back to stock, but it will still be unlocked.
Sent from my EVO using xda premium
Ok thnx for that. I was award of the fact you fanboy relock of. What about recovery? When I use stock Rom I should also need stock recovery I think.
Is that true? For desire and hox I used ruu to go back to stock rom.
Sent from my EndeavorU using xda premium
twistednl said:
Ok thnx for that. I was award of the fact you fanboy relock of. What about recovery? When I use stock Rom I should also need stock recovery I think.
Is that true? For desire and hox I used ruu to go back to stock rom.
Sent from my EndeavorU using xda premium
Click to expand...
Click to collapse
The 10.4.2.18 blob file you flash from the asus site comes with the stock recovery. The prime will be totally stock after you flash it other than being still unlocked. It will be like it was when you first pulled it out of the box. its exactly like a RUU
Sent from my EVO using Tapatalk 2
---------- Post added at 10:50 AM ---------- Previous post was at 10:29 AM ----------
ASAPSEVEN said:
The 10.4.2.18 blob file you flash from the asus site comes with the stock recovery. The prime will be totally stock after you flash it other than being still unlocked. It will be like it was when you first pulled it out of the box. its exactly like a RUU
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Here is the link to the firmware downloads
http://www.asus.com/Tablet_Mobile/Eee_Pad_Transformer_Prime_TF201/#support_Download_32
Sent from my EVO using xda premium
@ASAPSEVEN
Are you sure about this? because what I have read is, once you unlocked the prime you shouldn't flash stock ROMs that is taken from ASUS website. Doing so totally bricks your Prime. It has mentioned here.
Or does it mean when we have unlocked and ALSO installed CWM, we shouldn't flash stock blob file?
I use twrp so I Dont know. I flashed Asus blob files and they worked fine for me no problem at all.
Sent from my EVO using xda premium
ASAPSEVEN said:
I use twrp so I Dont know. I flashed Asus blob files and they worked fine for me no problem at all.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
But still its very risky. Because stock rom contains recover and bootloader which may corrupt the unlocked bootloader and custom recovery.
So I prefer, custom cooked JB ROM out of stock roms.
I don't think the Prime will get anymore OTAs anyway since it didn't get the last OTA the 700/300 got. And the Asus announcement of android 4.2 update left out the Prime too.
It will be a hard choice. Would like stock instead of a custom one. Simply because it will sell more easy.
Thnx for all the info guys!
Will think it over tonight and take the change.
Sent from my EndeavorU using xda premium
htcplussony said:
I don't think the Prime will get anymore OTAs anyway since it didn't get the last OTA the 700/300 got. And the Asus announcement of android 4.2 update left out the Prime too.
Click to expand...
Click to collapse
Yeah I know its a shame because the prime is a awesome tablet
Sent from my EVO using xda premium
---------- Post added at 10:37 AM ---------- Previous post was at 10:35 AM ----------
twistednl said:
It will be a hard choice. Would like stock instead of a custom one. Simply because it will sell more easy.
Thnx for all the info guys!
Will think it over tonight and take the change.
Sent from my EndeavorU using xda premium
Click to expand...
Click to collapse
What recovery do you have cwm or twrp?
Sent from my EVO using xda premium
ASAPSEVEN said:
Yeah I know its a shame because the prime is a awesome tablet
Sent from my EVO using xda premium
---------- Post added at 10:37 AM ---------- Previous post was at 10:35 AM ----------
What recovery do you have cwm or twrp?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I have Blackbean 7.1 which is Android 4.2 so I needed twrp (like cwm more personally. use it on my hox as well).
Can I flash a blob file via twrp ?
twistednl said:
I have Blackbean 7.1 which is Android 4.2 so I needed twrp (like cwm more personally. use it on my hox as well).
Can I flash a blob file via twrp ?
Click to expand...
Click to collapse
Yeah I would use twrp to flash the blob file just to be safe. I use twrp and have flashed blob files from the asus site, and had no problem at all went as smooth as butter.
Sent from my EVO using xda premium
ASAPSEVEN said:
Yeah I would use twrp to flash the blob file just to be safe. I use twrp and have flashed blob files from the asus site, and had no problem at all went as smooth as butter.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
My fingers are crossed (types pretty hard btw ) cause the restore is running
twistednl said:
My fingers are crossed (types pretty hard btw ) cause the restore is running
Click to expand...
Click to collapse
Good luck let me know how it goes.
Sent from my EVO using xda premium
GRMBL!
I downloaded WW_epaduser_10_4_2_18UpdateLauncher.zip from http://www.asus.com/Tablet_Mobile/Eee_Pad_Transformer_Prime_TF201/#support_Download_32
I unzipped it and copied the zip inside the zip (WW_epad-user-10.4.2.18.zip) to external SD.
Rebooted to twrp, wiped everything I could wipe (dalvik, cache, factory default) and started to install
After a small minute it shows me;
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
Updating partition details...
E:Unable to mount '/staging'
Where am I going the wrong way?
I hope to sell it tomorrow but when I brick it, I can't....
Thnx again!
Should be OK just hit reboot system then a blue line will fill up and it will reboot itself
Sent from my EVO using xda premium
ASAPSEVEN said:
Should be OK just hit reboot system then a blue line will fill up and it will reboot itself
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Great! I see its updating now. Thnx for the very quick responce. F5 button on laptop is heated up a bit
I was waiting for a response cause I did not dare to do that
Thnx again.
Back in stock and ready to sell
Ralph
Sent from my EndeavorU using xda premium
twistednl said:
Great! I see its updating now. Thnx for the very quick responce. F5 button on laptop is heated up a bit
I was waiting for a response cause I did not dare to do that
Thnx again.
Back in stock and ready to sell
Ralph
Sent from my EndeavorU using xda premium
Click to expand...
Click to collapse
It should reboot after the blue line fills up and everything should be stock again
Did it reboot yet?
Sent from my EVO using xda premium
ASAPSEVEN said:
It should reboot after the blue line fills up and everything should be stock again
Did it reboot yet?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Yes I did!
Its up and running again. Thnx a lot!
Sent from my HTC Desire using xda premium
twistednl said:
Yes I did!
Its up and running again. Thnx a lot!
Sent from my HTC Desire using xda premium
Click to expand...
Click to collapse
Good glad I could help you out
Sent from my EVO using xda premium
Hey people. I'm having a hard time flashing roms on my 4GLTE. Ill wipe, factory reset and wipe the cache but when I install the Rom it doesn't do anything. I've only been able to flash 2 roms the stock with goodies rom and the viper rom. And ideas on what's going on or help? Thanks
Sent from my EVO using xda app-developers app
Follow the tutorials under General and start with posting details such as current specs, SON, SOFF, Hboot etc., then which ROMs you have tried and steps you have done to attempt installing them.
The more details you give the more XDA can help.
Please give us some more information. Are you s-off? Are you on the most recent firmware? Have you updated your touch panel driver? What do you mean by "nothing happens"? Are you getting boot loops or is the phone not booting at all or is the touch panel unresponsive?
garfilo said:
Please give us some more information. Are you s-off? Are you on the most recent firmware? Have you updated your touch panel driver? What do you mean by "nothing happens"? Are you getting boot loops or is the phone not booting at all or is the touch panel unresponsive?
Click to expand...
Click to collapse
Sorry I'm on S-On I do have the latest hboot. I've pretty much tried every updated Rom in the forum. It will either 1, stay on the HTC screen, 2 it will boot loop or 3 ill just have a black screen where ill have to restart back into recovery and go back to my previous backup. I have the Viper Rom right now. I can try to attach a screen shot of the roms I've downloaded and all of them gave me 1 of those 3 problems except viper and the stock with goodies Rom
Sent from my EVO using xda app-developers app
Being that you are s-on you have to flash the kernel/boot.img first use flash image gui from the playstore or fastboot flash the kernel.
I suggest getting s-off it will save you so many headaches
bigdaddy619 said:
Being that you are s-on you have to flash the kernel/boot.img first use flash image gui from the playstore or fastboot flash the kernel.
I suggest getting s-off it will save you so many headaches
Click to expand...
Click to collapse
You beat me to it
Some ROMs (like Viper and MeanBean) include a kernel installer for S-on. For those that don't you'll need to follow bigdaddy's advice above.
Sent from my EVO using xda premium
FinZ28 said:
You beat me to it
Some ROMs (like Viper and MeanBean) include a kernel installer for S-on. For those that don't you'll need to follow bigdaddy's advice above.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
you got ninja'd
bigdaddy619 said:
you got ninja'd
Click to expand...
Click to collapse
Hehehe, yup
:beer:
Sent from my EVO using xda premium
FinZ28 said:
You beat me to it
Some ROMs (like Viper and MeanBean) include a kernel installer for S-on. For those that don't you'll need to follow bigdaddy's advice above.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Cool thanks everybody!
Sent from my EVO using xda app-developers app
So I recently rooted my phone and I tried to install the CM 10.1 mod. I did everything correctly except I didn't backup my original rom. So now the custom rom won't boot up because it gets stuck at the HTC startup screen and stays there. I went back into the twrp and tried to re-install the custom rom and again it didn't work. Now I went back and all my files are gone including the custom rom! So basically I think that the phone is booting because there is nothing on there. I tried to change the recovery image back to the original htc rom according to htcevohacks.com and i tried doing a factory reset but it didn't work. is it possible to fix this if so how? Thanks.
k_yara said:
So I recently rooted my phone and I tried to install the CM 10.1 mod. I did everything correctly except I didn't backup my original rom. So now the custom rom won't boot up because it gets stuck at the HTC startup screen and stays there. I went back into the twrp and tried to re-install the custom rom and again it didn't work. Now I went back and all my files are gone including the custom rom! So basically I think that the phone is booting because there is nothing on there. I tried to change the recovery image back to the original htc rom according to htcevohacks.com and i tried doing a factory reset but it didn't work. is it possible to fix this if so how? Thanks.
Click to expand...
Click to collapse
If you can get into twrp you can mount usb storage and put the Rom zip back on and the reason it won't boot is because you are s-on you need to fastboot flash the boot.img first
Sent from the "Blue" One
bigdaddy619 said:
If you can get into twrp you can mount usb storage and put the Rom zip back on and the reason it won't boot is because you are s-on you need to fastboot flash the boot.img first
Sent from the "Blue" One
Click to expand...
Click to collapse
^This.
Check out the link in my sig. It has info on how to flash the kernel (boot.img) while S-on.
Sent from my EVO using xda premium
bigdaddy and fin are my heros
*Information IS the most dangerous weapon of all*
drlzanej said:
bigdaddy and fin are my heros
*Information IS the most dangerous weapon of all*
Click to expand...
Click to collapse
:beer:
Sent from my EVO using xda premium
ok so as you guys said I can put the rom back on and install it and I have tried it. I got the initial set up of the new rom but the touchscreen doesn't work. I tried 2 other roms too and the touchscreen doesn't work on all of them. Do i just have to keep trying out roms? If you guys could post any roms that you have tried before that'd be great. I just want my phone to run something right now.
Try running a ROM based on the 3.16 OTA such as ViperROM or MeanBean. What version of TWRP are you on?
Also note if you use either of the ROM's listed above, they have S-on kernel installers. Just follow the installation instructions.
Sent from my EVO using xda premium
I'm using twrp 2.5.0.0 and I'm planning on trying the MeanBean ROM
k_yara said:
I'm using twrp 2.5.0.0 and I'm planning on trying the MeanBean ROM
Click to expand...
Click to collapse
Give it a shot. The 3.16 OTA included a touch panel driver update. If you have the updated driver you can only run 3.16 base ROM's and also must use TWRP 2.4+, otherwise, your touch panel won't work. If you gain S-off you can downgrade the driver and run whatever ROM you want.
Once S-off you don't have to fool with flashing the kernel separately, either
Sent from my EVO using xda premium
So according to the MeanBean developer the kernel installer is built in, so all i have to do is flash the .zip file and it will take care of everything correct?
k_yara said:
So according to the MeanBean developer the kernel installer is built in, so all i have to do is flash the .zip file and it will take care of everything correct?
Click to expand...
Click to collapse
I think, if I recall correctly, you have to flash the ROM zip twice. After you flash the first time, you will be prompted to flash it again.
Sent from my EVO using xda premium
FinZ28 said:
I think, if I recall correctly, you have to flash the ROM zip twice.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Yep, you're right on that. Alright well once my download is done I'll give it a shot and hope it works. I'll post if I succeeded or not once its done, thanks for all the help so far.
k_yara said:
Yep, you're right on that. Alright well once my download is done I'll give it a shot and hope it works. I'll post if I succeeded or not once its done, thanks for all the help so far.
Click to expand...
Click to collapse
Not a problem
Sent from my EVO using xda premium
FinZ28 said:
Not a problem
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Success! It's functioning properly! Thanks for all the help guys!
k_yara said:
Success! It's functioning properly! Thanks for all the help guys!
Click to expand...
Click to collapse
Anytime. Glad to see you're up and running
Sent from my EVO using xda premium
Hey guys I have a note ii but one of my friends has an HTC One and she's having some trouble and I am unfamiliar with HTC stuff and need some help. She rooted and unlocked and has TWRP installed. I've tried flashing Roms thru TWRP and I can only get a stock build to flash sucessfully and even that failed on the first try but when I try to flash clean ROM it always fails and won't work. Any ideas what's going on? Thanks
Sent from my SCH-I605 using xda app-developers app
billymaloney3 said:
Hey guys I have a note ii but one of my friends has an HTC One and she's having some trouble and I am unfamiliar with HTC stuff and need some help. She rooted and unlocked and has TWRP installed. I've tried flashing Roms thru TWRP and I can only get a stock build to flash sucessfully and even that failed on the first try but when I try to flash clean ROM it always fails and won't work. Any ideas what's going on? Thanks
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Possibly an outdated twrp recovery. Try installing the newest version and see how that goes.
Sent from my HTC One using xda app-developers app
What all are you wiping in twrp? What rom are you trying to flash? Maybe she needs s-off?
Sent from my HTC One
Is her one S-off? If not, I believe you'll need to flash the bootIMG/kernel seperately thru fastboot . I'm guessing cuz I have HTC Evo LTE and it's the sane way if you're not S-off.
If you're unfamiliar, I bet there's guides stickied in general or Q&A.
Good luck.
Sent from my EVO using xda premium
spitfire2425 said:
What all are you wiping in twrp? What rom are you trying to flash? Maybe she needs s-off?
Sent from my HTC One
Click to expand...
Click to collapse
I wipe everything when I do it. I've been rooting for a long time now and I'm pretty good but I've never owned an HTC device so I'm not sure how to check if she has s-off but she is rooted. I was able to flash a bone stock 4.3 ROM but I couldn't get clean ROM to flash
Sent from my SCH-I605 using xda app-developers app
mito8485 said:
Possibly an outdated twrp recovery. Try installing the newest version and see how that goes.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I update that thru the goo app right?
Sent from my SCH-I605 using xda app-developers app
You Do NOT need s-off to flash any current ROM's on the one. And you don't have to flash kernels separately like on older htc phones, so don't worry about that.
Honestly I really don't see why your having trouble with clean rom... What exactly is it doing when you try to flash it?
Sent from my HTC One using xda app-developers app