Hi guys
I am currently struggling to flash to FXP XPERIA ROM using Sola. It's my first time flashing from ICS Sony Stock Rom.
I am getting Status 7
I have rooted my phone
Unlocked boatloader
Installed CWM
Could you please help?
Sent from my GT-P7500 using xda app-developers app
Mphidi said:
Hi guys
I am currently struggling to flash to FXP XPERIA ROM using Sola. It's my first time flashing from ICS Sony Stock Rom
I have rooted my phone
Unlocked boatloader
Installed CWM
Could you please help?
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
1) Extract the contents you will get 3 things in it .... boot.img (file) , system(folder) , meta-inf (folder)
2) Leaving the boot.img out repack the other two folders (system,meta-inf)
3) fastboot the boot.img file via fastboot by this command "fast boot flash boot boot.img" without quotes
4) then place the new packed zip file
The one without the boot image
5) try flashing it
6) factory reset and wipe delvik cache and reboot
Hope this will solve the problem
Sent From Xperia Sola White (MT27i)
Rooted Stock ICS
Hit Thanks If I Helped!!
it's because you are in stock kernel with recovery.
u must install CM kernel included in the zip file.
just do what soulhackereborn said
Thanks, I followed your advice and it worked
Sent from my MT27i using xda app-developers app
Status 7 problem not solved!
I have a Sony Xperia LT22i (nypon). I had the stock version of jb by sony i.e., 6.2.A.1.100.
I have been trying to flash FXP233-cm-10 for xpeira p on my phone but the process has not been successfull.
the cwm recovery kernel alongwith the ROM is 6.0.2.8
I also have a cwm recovery kernel version 6.0.3.2
I successfully pushed the files into the sdcard but the installation from zip failed due to status 7.
The error shown is:
assert failed: getprop("ro.product.device") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.product.device") == "LT22a" || getprop("ro.build.product") == "LT22a" || getprop("ro.product.device") == "nypon" || getprop("ro.build.product") == "nypon"
E:Error in /sdcard/update.zip
(Status 7)
Installtion aborted
I tried editing the updater-script & then running the installation but then the log shows:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
My current status of phone is:
Recovery= CWM v6.0.2.8
Wiped dalvik cache
Wiped system("I did that accidentally")
Factory reset also
I also have the zip file FXP228-cm-10 for xperia p
both of them use the same cwm version
when i tried installing it, it showed the same error as above
Please help
---------- Post added at 06:00 PM ---------- Previous post was at 05:24 PM ----------
the kernel version that i've is 3.0.8-FXP-g9426a6e
Pkeshin said:
I have a Sony Xperia LT22i (nypon). I had the stock version of jb by sony i.e., 6.2.A.1.100.
I have been trying to flash FXP233-cm-10 for xpeira p on my phone but the process has not been successfull.
the cwm recovery kernel alongwith the ROM is 6.0.2.8
I also have a cwm recovery kernel version 6.0.3.2
I successfully pushed the files into the sdcard but the installation from zip failed due to status 7.
The error shown is:
assert failed: getprop("ro.product.device") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.product.device") == "LT22a" || getprop("ro.build.product") == "LT22a" || getprop("ro.product.device") == "nypon" || getprop("ro.build.product") == "nypon"
E:Error in /sdcard/update.zip
(Status 7)
Installtion aborted
I tried editing the updater-script & then running the installation but then the log shows:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
My current status of phone is:
Recovery= CWM v6.0.2.8
Wiped dalvik cache
Wiped system("I did that accidentally")
Factory reset also
I also have the zip file FXP228-cm-10 for xperia p
both of them use the same cwm version
when i tried installing it, it showed the same error as above
Please help
---------- Post added at 06:00 PM ---------- Previous post was at 05:24 PM ----------
the kernel version that i've is 3.0.8-FXP-g9426a6e
Click to expand...
Click to collapse
Stop posting multiple replies about it
Sent from a JB Moonbreaker 3.5 device
AndroidNoob69 said:
Stop posting multiple replies about it
Sent from a JB Moonbreaker 3.5 device
Click to expand...
Click to collapse
I would rather appreciate being helped in trying to solve the problem i've encountered, than having someone check where n how i post!!!!!!!
plzz try to understand
It is quite frustrating that you do not use tge SEARCH option in XDA. As you can see, there is ALREADY multiple threads about this so you WAIT for an answer in one of them.
Sent from a JB Moonbreaker 3.5 device
Related
Totally new issue now...every ROM I try to flash, I get an error when installing the zip in CWM saying something along the lines of
assert failed: getprop("ro.product.device") == "aries" || getprop("ro.build.product") == "aries" || getprop("ro.product.board") == "aries" || getprop("ro.product.device")) == "fascinate"
And continues to repeat that pattern of the first three using "fascinate", "fascinatemtd" and "SCH-I500"
What's the deal?
kaze06 said:
Totally new issue now...every ROM I try to flash, I get an error when installing the zip in CWM saying something along the lines of
assert failed: getprop("ro.product.device") == "aries" || getprop("ro.build.product") == "aries" || getprop("ro.product.board") == "aries" || getprop("ro.product.device")) == "fascinate"
And continues to repeat that pattern of the first three using "fascinate", "fascinatemtd" and "SCH-I500"
What's the deal?
Click to expand...
Click to collapse
a little more information would be helpful... what rom were you currently on and what rom are you trying to flash? Also what version of cwm are you using?
Personally, i strongly dislike CWM recovery. I recommend using Odin or Heimdall instead. They are a lot more straight forward. I tried to install CWM recovery and it was just a huge mess. Although I've never had a problem with odin
killerkiwiHD said:
Personally, i strongly dislike CWM recovery. I recommend using Odin or Heimdall instead. They are a lot more straight forward. I tried to install CWM recovery and it was just a huge mess. Although I've never had a problem with odin
Click to expand...
Click to collapse
Huh? The majority of roms out there need cwm to flash. You odin the appropiate recovery, three finger into cwm, wipe all three, then flash the zip. Thats how most roms work unless they are tar'd up, then you can flash in odin, but only a few are that way... pwgb, geewiz, and stock rom packages are odin compatible.
I had the same issue when trying to update my wife's phone today. Turned out I just needed to run an updated clockwork mod recovery.
First of all, i searched but nothing close to mine..
i tried flashing paranoid android yesterday to try the rom and this came:
assert failed: getprop("ro.product.device") == "galaxys2" || getprop ("ro.build.product") == "galaxys2" || getprop("ro.build.product") == "galaxys2" || getprop("ro.product.device") == "GT-I9100" and so on...... getprop("ro.product.device") == "GT-I9100M" and so on.......... getprop("ro.product.device") == "GT-I9100T" and so on.........
E:Error in emmc/zzzips/Modem......................
(status 7)
Installation aborted.
i factory reset and it worked..
i reverted back to my backup and this day i tried changing my modem and again (status 7) appeared again in which i cant flash the modem..
any solutions guys?
im on rootbox ics v1.7 and siyah v4.0
So no one else experienced this or have a clue??
Are you sure the ROM you downloaded is for your own device, the GT-I9100, and not for any other variant?
Sent from my GT-I9100 using xda app-developers app
The messages he is getting show that the install is checking to make sure it is an i9100, or an i9100 variant that is not the i9100G.
OP, are you sure you have an i9100 device?
yep im very sure..
first i tried flashing paranoid android v1.97 and then that message came for the first time..
i tried factory reset in recovery and i was able to flash paranoid android..
after which i restored my backup of rootbox v1.7 with siyah v4...
as usual all is good until the next morning in which i try to flash a different modem and the message came out again.. i tried flashing other modems too and it aborted..
and yes im very sure what i flash is for gt-i9100 and i alwasy double check it coz i dont have money to buy new phone or repair it if brick so im very careful..
Hey, guys. I'm one of the unfortunate lads that isn't able to unlock his bootloader. So I thought I'd give MIUI a try (2.8.10) since it claims to be able to flash on to lockedBL through CWM. So the problem is this, once the phone is rooted and in android 4.0.4 (for the right kernel) I go to CWM and follow the steps which should allow me to flash the rom (wiping cache, data, system etc.). However, the problem is this error right here,
"asset failed: getprop("ro.product.device") == "LT26i" | | getprop("ro.build.product") == "LT26i"
E: error in /sdcard/miuiandroid_LT26i-2.8.10.zip (status 7)
Installation aborted
No matter what I try, nothing gets rid of this error code. No one else is having this issue are they? I'm sick fed up of stock 4.0 on Sony, not optimised enough. Need a custom rom, especially since my bootloader is locked.
Thanks in advance for the help.
Can you install another cwm or it's the only recovery available for locked BL???
The problem is that the update script is made for another cwm.
Sent from my LT26i using Tapatalk 2
keewanchoapsss said:
Hey, guys. I'm one of the unfortunate lads that isn't able to unlock his bootloader. So I thought I'd give MIUI a try (2.8.10) since it claims to be able to flash on to lockedBL through CWM. So the problem is this, once the phone is rooted and in android 4.0.4 (for the right kernel) I go to CWM and follow the steps which should allow me to flash the rom (wiping cache, data, system etc.). However, the problem is this error right here,
"asset failed: getprop("ro.product.device") == "LT26i" | | getprop("ro.build.product") == "LT26i"
E: error in /sdcard/miuiandroid_LT26i-2.8.10.zip (status 7)
Installation aborted
No matter what I try, nothing gets rid of this error code. No one else is having this issue are they? I'm sick fed up of stock 4.0 on Sony, not optimised enough. Need a custom rom, especially since my bootloader is locked.
Thanks in advance for the help.
Click to expand...
Click to collapse
you can try 2 things:
1. in the CWM, choose mount -> format /system (careful) and then try flashing the rom or
2. open the zip file using 7zip, navigate to \META-INF\com\google\android\ folder edit "updater-script". remove assert(getprop("ro.product.device") == "LT26i" | | getprop("ro.build.product") == "LT26i" . You must use notepad++ for this
Sent from a neXus
I already tried your first suggestion and it failed on me horribly ha! So I guess I must have to try stage two thanks <3
edit: Right so I did your second suggestion and i had a different outcome, just simply says 'Installation aborted'. Any more ideas. I cant find another 'Locked Booloader' recovery.
Sent from my LT26i using xda premium
keewanchoapsss said:
I already tried your first suggestion and it failed on me horribly ha! So I guess I must have to try stage two thanks <3
edit: Right so I did your second suggestion and i had a different outcome, just simply says 'Installation aborted'. Any more ideas. I cant find another 'Locked Booloader' recovery.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
I replaced update-script from older version of miui and it work for me ...
I had the same problem today after unsuccessfully trying to install CM 9.0.
Luckily I had the SSpeed Kernel and KA ROM on the internal storage, so after doing a wipe and cleanup dalvik, I was able to flash the Kernel and then the ROM
keewanchoapsss said:
Hey, guys. I'm one of the unfortunate lads that isn't able to unlock his bootloader. So I thought I'd give MIUI a try (2.8.10) since it claims to be able to flash on to lockedBL through CWM. So the problem is this, once the phone is rooted and in android 4.0.4 (for the right kernel) I go to CWM and follow the steps which should allow me to flash the rom (wiping cache, data, system etc.). However, the problem is this error right here,
"asset failed: getprop("ro.product.device") == "LT26i" | | getprop("ro.build.product") == "LT26i"
E: error in /sdcard/miuiandroid_LT26i-2.8.10.zip (status 7)
Installation aborted
No matter what I try, nothing gets rid of this error code. No one else is having this issue are they? I'm sick fed up of stock 4.0 on Sony, not optimised enough. Need a custom rom, especially since my bootloader is locked.
Thanks in advance for the help.
Click to expand...
Click to collapse
this happen to me too.i m not able to flash any version of CM9 rom now.i m running on unlock bootloader.anny idea?
o
Older CWM compatible?
gm007 said:
Can you install another cwm or it's the only recovery available for locked BL???
The problem is that the update script is made for another cwm.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Which CWM version should work? How can you tell? I have 5.0.2.0, which is the latest for N1, but I can't flash MIUI.us_passion_v4.1_2.11.23_Eng_Deo_ZipA_Signed_0xD34D
I get a Status 7 abort error
Status 7 problem not solved!
I have a Sony Xperia LT22i (nypon). I had the stock version of jb by sony i.e., 6.2.A.1.100.
I have been trying to flash FXP233-cm-10 for xpeira p on my phone but the process has not been successfull.
the cwm recovery kernel alongwith the ROM is 6.0.2.8
I also have a cwm recovery kernel version 6.0.3.2
I successfully pushed the files into the sdcard but the installation from zip failed due to status 7.
The error shown is:
assert failed: getprop("ro.product.device") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.product.device") == "LT22a" || getprop("ro.build.product") == "LT22a" || getprop("ro.product.device") == "nypon" || getprop("ro.build.product") == "nypon"
E:Error in /sdcard/update.zip
(Status 7)
Installtion aborted
I tried editing the updater-script & then running the installation but then the log shows:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
My current status of phone is:
Recovery= CWM v6.0.2.8
Wiped dalvik cache
Wiped system("I did that accidentally")
Factory reset also
I also have the zip file FXP228-cm-10 for xperia p
both of them use the same cwm version
when i tried installing it, it showed the same error as above
Please help
the kernel version that i've is 3.0.8-FXP-g9426a6e
Pkeshin said:
I have a Sony Xperia LT22i (nypon). I had the stock version of jb by sony i.e., 6.2.A.1.100.
I have been trying to flash FXP233-cm-10 for xpeira p on my phone but the process has not been successfull.
the cwm recovery kernel alongwith the ROM is 6.0.2.8
I also have a cwm recovery kernel version 6.0.3.2
I successfully pushed the files into the sdcard but the installation from zip failed due to status 7.
The error shown is:
assert failed: getprop("ro.product.device") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.product.device") == "LT22a" || getprop("ro.build.product") == "LT22a" || getprop("ro.product.device") == "nypon" || getprop("ro.build.product") == "nypon"
E:Error in /sdcard/update.zip
(Status 7)
Installtion aborted
I tried editing the updater-script & then running the installation but then the log shows:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
My current status of phone is:
Recovery= CWM v6.0.2.8
Wiped dalvik cache
Wiped system("I did that accidentally")
Factory reset also
I also have the zip file FXP228-cm-10 for xperia p
both of them use the same cwm version
when i tried installing it, it showed the same error as above
Please help
the kernel version that i've is 3.0.8-FXP-g9426a6e
Click to expand...
Click to collapse
I'm curious, put a copy of the updater script on here please. . .
Nathan.7118391 said:
I'm curious, put a copy of the updater script on here please. . .
Click to expand...
Click to collapse
Actually i successfully completed the process bydoing the following:
i flashed the jb stock rom for xperia p again...
unlocked the bootloader again,
then copied the rom.zip & gapps.zip to sdcard,
flashed cwm v6.0.2.8 (provided with the rom),
flashed the zip files
& voila! everything worked fine....
though i still don't understand why it didn't install first 'coz, i followed the procedure to edit the 'updater-script' to the word....but nothing happened
guess i managed to get lucky a bit!
by now i've successfully flashed & tried the following roms:
FXP233 (cm10) ["THE BEST ON THE LIST"]
Pac man rom(based on cm10.1, pa, aokp) ["Buggy, can't install purchased apps, problems in installing apps on sdcard, bluetooth doesn't work, but overall customization, performance is pretty good, though i would've been glad if the devs had included some sort of inbuilt battery saver mode, like the battery stamina in stock jb roms for 2012(some models) & 2013 xperia series)
Revolution v33.4 (lagged a lot on my phone, hope someone else had a better time using this one)
Good for you! You have to be careful when dealing with scripts, its very easy to insert a space or forget to close quotes and it doesn't work. Format could have been amend instead of edify but that's provably not likely.
Sent from my LG-P769 using xda-developer's app. Hit thanks' cause it makes me feel good.
status 7 error
I m updating from MIUI version 4.2.23 to version 4.3.4 ota updat.
The error Msg says
Verifying current system.
Assert failed. apply patch check and bla bla bla... n then
error in sd card location and then
Status 7
Kindly help...
Well this has been a fight every step of the way....
Im bootloader unlocked
CWM installed (although ive only manager to get into it once)
when i did i got an error status 7 when i tried to flash
googled it - apparently it could be something to do with baseband being wrong/need updating??
Hopefully someone can help
Cheers
Comfy
status ,7 error mostly occurs due to incompatible kernel
which rom are u trying to flash
have u flashed any kernel?
Sent from my Xperia U using Tapatalk 2
First flash included kernel in ROM install ROM now flash desired kernel...
Hi - i kinda got there in the end. When i got the error i was on CWM 5.something (cant remember which one exactly) then i flash Nemesis CWM 2.1 which upped my CWM version to 6.0.1.2 then it let me flash "FireCyano 4.0"
So whats the deal then - i cant just find a rom and flash - i have to find its corresponding kernel...?
I have a Sony Xperia LT22i (nypon). I had the stock version of jb by sony i.e., 6.2.A.1.100.
I have been trying to flash FXP233-cm-10 for xpeira p on my phone but the process has not been successfull.
the cwm recovery kernel alongwith the ROM is 6.0.2.8
I also have a cwm recovery kernel version 6.0.3.2
I successfully pushed the files into the sdcard but the installation from zip failed due to status 7.
The error shown is:
assert failed: getprop("ro.product.device") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.product.device") == "LT22a" || getprop("ro.build.product") == "LT22a" || getprop("ro.product.device") == "nypon" || getprop("ro.build.product") == "nypon"
E:Error in /sdcard/update.zip
(Status 7)
Installtion aborted
I tried editing the updater-script & then running the installation but then the log shows:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
My current status of phone is:
Recovery= CWM v6.0.2.8
Wiped dalvik cache
Wiped system("I did that accidentally")
Factory reset also
I also have the zip file FXP228-cm-10 for xperia p
both of them use the same cwm version
when i tried installing it, it showed the same error as above
Please help
the kernel version that i've is 3.0.8-FXP-g9426a6e
Pkeshin said:
I have a Sony Xperia LT22i (nypon). I had the stock version of jb by sony i.e., 6.2.A.1.100.
I have been trying to flash FXP233-cm-10 for xpeira p on my phone but the process has not been successfull.
the cwm recovery kernel alongwith the ROM is 6.0.2.8
I also have a cwm recovery kernel version 6.0.3.2
I successfully pushed the files into the sdcard but the installation from zip failed due to status 7.
The error shown is:
assert failed: getprop("ro.product.device") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.product.device") == "LT22a" || getprop("ro.build.product") == "LT22a" || getprop("ro.product.device") == "nypon" || getprop("ro.build.product") == "nypon"
E:Error in /sdcard/update.zip
(Status 7)
Installtion aborted
I tried editing the updater-script & then running the installation but then the log shows:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
My current status of phone is:
Recovery= CWM v6.0.2.8
Wiped dalvik cache
Wiped system("I did that accidentally")
Factory reset also
I also have the zip file FXP228-cm-10 for xperia p
both of them use the same cwm version
when i tried installing it, it showed the same error as above
Please help
the kernel version that i've is 3.0.8-FXP-g9426a6e
Click to expand...
Click to collapse
Follow steps
- Replace Metainf folder of FXP 233 with that of previous build FXP 228
- fix permissions in CWM and reboot
- Enter recovery den do wipes and install rom from zip
kalyan_kadari said:
Follow steps
- Replace Metainf folder of FXP 233 with that of previous build FXP 228
- fix permissions in CWM and reboot
- Enter recovery den do wipes and install rom from zip
Click to expand...
Click to collapse
i tried your method, but now the msg shown is:
Opening update package...
Installing update...
Installation aborted
Pkeshin said:
i tried your method, but now the msg shown is:
Opening update package...
Installing update...
Installation aborted
Click to expand...
Click to collapse
create a new zip file with compression rate to store and try that new zip........
kalyan_kadari said:
create a new zip file with compression rate to store and try that new zip........
Click to expand...
Click to collapse
can u please elaborate
coz i've already tried nearly everything like editing the updater-script, renaming the rom, everytime i've done it after factory reset
Pkeshin said:
can u please elaborate
coz i've already tried nearly everything like editing the updater-script, renaming the rom, everytime i've done it after factory reset
Click to expand...
Click to collapse
Just follow these
- extract FXP 233
- It contains MetaInf, system and boot.img.... replace metainf from previous FXP build dat u have...
- now select all 3 folders(metainf, system and boot.img).....
- using 7zip right click aft selecting select 7Zip-- add to archive...
- new window popouts and in dat set compression to store and click ok
copy zip----- wipes----- install zip
kalyan_kadari said:
Just follow these
- extract FXP 233
- It contains MetaInf, system and boot.img.... replace metainf from previous FXP build dat u have...
- now select all 3 folders(metainf, system and boot.img).....
- using 7zip right click aft selecting select 7Zip-- add to archive...
- new window popouts and in dat set compression to store and click ok
copy zip----- wipes----- install zip
Click to expand...
Click to collapse
Actually i've already tried this,
But i still can't seem to figure out the reason why the installation is cancelling????
I've the gapps signed zip file compatible with the cm10 rom tht i've, i tried installing it without installing the rom, and surprisingly the process completed and showed tht gapps have been installed....
after this i did a factory reset,
pushed the zip file into the sdcard
rebooted the phone into recovery
mount /system
mount /data
mount /data /sdcard
install zip from sdcard
chose the zip file i pushed earlier
confirmed the installation
but the same msg appears
Installing update...
Installation aborted
---------- Post added at 07:18 PM ---------- Previous post was at 07:09 PM ----------
Pkeshin said:
Actually i've already tried this,
But i still can't seem to figure out the reason why the installation is cancelling????
I've the gapps signed zip file compatible with the cm10 rom tht i've, i tried installing it without installing the rom, and surprisingly the process completed and showed tht gapps have been installed....
after this i did a factory reset,
pushed the zip file into the sdcard
rebooted the phone into recovery
mount /system
mount /data
mount /data /sdcard
install zip from sdcard
chose the zip file i pushed earlier
confirmed the installation
but the same msg appears
Installing update...
Installation aborted
Click to expand...
Click to collapse
is it possible that i can flash the stock jb rom 6.2.A.1.100 again, then repeat the process to flash fxp233 rom
if yes can you tell me how?
Pkeshin said:
Actually i've already tried this,
But i still can't seem to figure out the reason why the installation is cancelling????
I've the gapps signed zip file compatible with the cm10 rom tht i've, i tried installing it without installing the rom, and surprisingly the process completed and showed tht gapps have been installed....
after this i did a factory reset,
pushed the zip file into the sdcard
rebooted the phone into recovery
mount /system
mount /data
mount /data /sdcard
install zip from sdcard
chose the zip file i pushed earlier
confirmed the installation
but the same msg appears
Installing update...
Installation aborted
---------- Post added at 07:18 PM ---------- Previous post was at 07:09 PM ----------
is it possible that i can flash the stock jb rom 6.2.A.1.100 again, then repeat the process to flash fxp233 rom
if yes can you tell me how?
Click to expand...
Click to collapse
ya it is possible
just download flashtool and original .ftf file
---------- Post added at 07:43 PM ---------- Previous post was at 07:39 PM ----------
just follow dis guide
http://xperiafirmware.com/8-firmware/20-sony-xperia-p-lt22
Hi,
I am using hTC Amaze 4g status: S-NO
I unlock my bootloader from your toolkit and I install recovery then I took backup and then I wipe all the thing and did a factory reset. And trying to change my rom but unfortunately I am getting this error:
Status 7 installation aborted
1st Rom Error:
file_getprop: failed to stat "/system/build.prop": No such file or directory
E:Error in /internal_sdcard/OTA_RUBY_ICS_35_S_Videotron_CA_2.14.1530.6-1.46.1530.1_R2_release_2630972v8tnj4gaksgm0w5.zip
(Status 7)
Installation aborted
2nd Rom Error:
assert failed: getprop("ro.product.device") == "marvel" || getprop("ro.build.product") == "marvel"
E:Error in /internal_sdcard/pa_marvel-2.54-beta1-08NOV2012-164651.zip
(Status 7)
Installation aborted
3rd Rom Error:
assert failed: getprop("ro.product.device") == "grouper" || getprop("ro.build.product") == "grouper"
E:Error in /internal_sdcard/RasSaber_grouper_ota_2013-05-27.zip
(Status 7)
Installation aborted
I am not able to install any rom. I installed this ViperA.1.6.9_2.zip but this rom is not working properly camera & sound both are not working in this rom.
after this I tried to change my recovery first I installed TWRP 2.3.3.0 then I installed 4EXT but getting same issue in both.
I took backup of my hTC Amaze 4g orignal rom but unfortunately I lost my backup in wiping and factory reseting now I don't have my orignal rom which I backup in my phone.
I really need help me. Its urgent my phone is off.
kumaillakhani said:
Hi,
I am using hTC Amaze 4g status: S-NO
I unlock my bootloader from your toolkit and I install recovery then I took backup and then I wipe all the thing and did a factory reset. And trying to change my rom but unfortunately I am getting this error:
Status 7 installation aborted
1st Rom Error:
file_getprop: failed to stat "/system/build.prop": No such file or directory
E:Error in /internal_sdcard/OTA_RUBY_ICS_35_S_Videotron_CA_2.14.1530.6-1.46.1530.1_R2_release_2630972v8tnj4gaksgm0w5.zip
(Status 7)
Installation aborted
2nd Rom Error:
assert failed: getprop("ro.product.device") == "marvel" || getprop("ro.build.product") == "marvel"
E:Error in /internal_sdcard/pa_marvel-2.54-beta1-08NOV2012-164651.zip
(Status 7)
Installation aborted
3rd Rom Error:
assert failed: getprop("ro.product.device") == "grouper" || getprop("ro.build.product") == "grouper"
E:Error in /internal_sdcard/RasSaber_grouper_ota_2013-05-27.zip
(Status 7)
Installation aborted
I am not able to install any rom. I installed this ViperA.1.6.9_2.zip but this rom is not working properly camera & sound both are not working in this rom.
after this I tried to change my recovery first I installed TWRP 2.3.3.0 then I installed 4EXT but getting same issue in both.
I took backup of my hTC Amaze 4g orignal rom but unfortunately I lost my backup in wiping and factory reseting now I don't have my orignal rom which I backup in my phone.
I really need help me. Its urgent my phone is off.
Click to expand...
Click to collapse
Do you people even read before doing this stuff. In every guide it tells you that you need to run an ics ruu before running roms and to do that you need to s-off. If your phone is the international version, no you cant change your rom unless you are s off.
Sent from my Amaze 4G using xda app-developers app
Well one of the main problems Is that the "roms" you are trying to flash in recovery, are all ruu's! Lol^^^
Read my guides, they are stickied in the general section... learn a little more nout what's going on then try again
Sent from my SCH-I535 using xda app-developers app