[Q] Failing to flash with TWRP - Huawei MediaPad, T-Mobile SpringBoard

Was running the official ICS rom from Huawei but decided to update to either CM10 or AOKP. When I first did CM10 it simply kept on the boot screen with CyanomodGen circling forever. So I wiped and tried with AOKP.... it showed failed on TWRP
Now I have NO OS on the Mediapad and am unable to flash either CM10 or AOKP as they both show 'failed' on TWRP.
Any help would be very much gratefully received.

Mistahg said:
Was running the official ICS rom from Huawei but decided to update to either CM10 or AOKP. When I first did CM10 it simply kept on the boot screen with CyanomodGen circling forever. So I wiped and tried with AOKP.... it showed failed on TWRP
Now I have NO OS on the Mediapad and am unable to flash either CM10 or AOKP as they both show 'failed' on TWRP.
Any help would be very much gratefully received.
Click to expand...
Click to collapse
OK, since writing this I did a few things and it ended up working. AOKP didn't work with Facebook but now CM10 is happily working.

I had this same problem a few times. I think it's a problem with the zip file. Whent this happens i redownload the rom, always works...

Related

[Q] CM10.1 Nightly's stuck on boot animation

I've been running the Cyanogen Mod 10.1 nightly's and yesterday my tablet crashed and rebooted but would not go past the boot animation. I tried restarting it many time but it only boots to the animation. I booted into bootloader mode and wipted everything and tried installing an older nightly and the wingray gapps. It still is stuck not booting up only showing the spinning boot animation. Anyone have any ideas on what I can do? Any help would be greatly appreciated
Is there a way to update to a working rom though odin? I can't figure out how to do that.
Guys I installed the latest nightly, except for the keyboard problem, the resolution seems to be wrong: the writing in fact are blurred. is it a known problem?
Patfors613 said:
Is there a way to update to a working rom though odin? I can't figure out how to do that.
Click to expand...
Click to collapse
Yes, you can use odin to flash a rom, but it must be a stock rom, after which you will need to root your device again, install CWM recovery and then flash the nightly again. To use odin, you will need to put the device in download mode connect to the pc after activating odin and when the device is recognised (one of the boxes will light up in yellow) then put the extracted firmware in PDA of odin and click start. If successful, a green PASS will show in odin. Disconnect the device and wait for the device to boot up. You can try ICS 4.0.4 which is commonly available in Samsmobile.
Sent from my GT-P7500 using xda app-developers app
Mine just died too. Went back to stock 4.0.4
Sent from my GT-P7500R using xda app-developers app
For the bootloop, you can try to Wipe Cache/Dalvik.
But honestly, every new update that is pushed out, it's harder for our tabs to manage. So unstable to keep it up-to-date with every version, haha.
Thanks! I'll be going back to stock when I return home from work. Does anyone know where I can get CM 9 or 10 nightlies or stable ROM?

t mobile amaze stuck on stock ruu boot

So I flashed cm10 mod on my amaze and had made a backup.somehow the cm10 didn't work as i thought it would so i restored to my previous rom(ics) then I tried to flash the speed butter 9.0 rom and then again i restored back to ICS.then lastly i flashed Aokp rom but it kept saying ""the process com.android.phone has stopped" so I restored it to my stock rom(ICS).When I rebooted,it got stuck at htc t mobile android screen. Please help
First off are you s-on or off? Also, what recovery are you using..
4EXT and S on.Apparently I have managed to save my device. What happened was that,I relocked the boot loader,downloaded the latest stock ruu and flashed it through the HTC amaze tool kit. All of the roms which I tried had problems,cm 10 would freeze a bit if I would swipe on the home screen,speed rom 9,wouldn't show me contacts when I would type a name and AOKP jelly bean rom kept giving me the "the process com.android.phone has stopped" error" . I don't think I will ever try flashing a custom rom now. But I wonder why it got stuck at boot screen when I restored the stock ICS rom in the end?. I thank you for your reply.
wahid beg said:
4EXT and S on.Apparently I have managed to save my device. What happened was that,I relocked the boot loader,downloaded the latest stock ruu and flashed it through the HTC amaze tool kit. All of the roms which I tried had problems,cm 10 would freeze a bit if I would swipe on the home screen,speed rom 9,wouldn't show me contacts when I would type a name and AOKP jelly bean rom kept giving me the "the process com.android.phone has stopped" error" . I don't think I will ever try flashing a custom rom now. But I wonder why it got stuck at boot screen when I restored the stock ICS rom in the end?. I thank you for your reply.
Click to expand...
Click to collapse
I think the problem was that when you flashed cm10 and aokp etc, 4ext flashed the cm kernel (obviously). But what 4ext is unable to do is restore a kernel (boot.img) when you are simply restoring a backup. Therefore you still had the cm kernel which isnt compatible with your stock rom you have backed up.
I think if you had just found a download for the stock ics kernel and flashed it you would have been fine. Or of course simply flashing the RUU will usually always fix anything too

[Q] SGT-P7500 3G Doesn't boot anymore -err:0x4

This morning as took my tablet the screen did not switch on, i tried to reboot then it stuck on bootanimation, then i tried to wipe; it still stuck on
bootanimation. Next I tried a complete wipe and installed a new Rom --> same Problem only goes to the bootanimation.
Then I tried to flash with odin, it tells me "complete write operation failed" and err:0x4. Nvflash isn't working too. So what can I do. I was on CM 10.1 nightly before, and evertything worked very well till this morning. I still can go to Download mode but twrp is not working anymore.
Thanks in advance in sorry about my poor english.
Regards.
Maybe the last edit will give you a hint:
http://forum.xda-developers.com/showthread.php?t=1276873
@dvb127 This morning the same happend to my Tablet. Could you find a way to fix it?
I have been running a CM-Version of january and switched to nightlies a couple of days ago. I can't remember anything else I changed
What I tried: flashed a new version of CWM (6.0.3.2) via ODIN and installed the january & newest CM via CWM. Both worked fine.
Still the same problem. When I boot the tablet it reboots several times and gets stuck in the CM bootanimation. Factoryreset and wiping /data causes a reboot.
NetZwerg said:
@dvb127 This morning the same happend to my Tablet. Could you find a way to fix it?
I have been running a CM-Version of january and switched to nightlies a couple of days ago. I can't remember anything else I changed
What I tried: flashed a new version of CWM (6.0.3.2) via ODIN and installed the january & newest CM via CWM. Both worked fine.
Still the same problem. When I boot the tablet it reboots several times and gets stuck in the CM bootanimation. Factoryreset and wiping /data causes a reboot.
Click to expand...
Click to collapse
I flashed a Stock Rom with Odin first, i had to too this in a win XP PC, because it didn't work in win8, rooted again, now I'm in cm again without any pproblems.
Hey, thanks a lot - worked for me as well

Status 7 Error won't go

Hey,
I got a problem with my S2g. I'm currently on Android 4.1.2, with cwm 6 and blazing v-5 kernel. Both were flashed per odin and work fine. However I can't flash a custom rom. Every time I try it I'll get a Status 7 error. I've already tried 4 different ROMs and I'm really annoyed by now. I also tried to factory reset the phone before I flash the ROM, but it didn't make any difference. I also tried deleting the assert command in the updater-script file but somehow my changes in the file won't be saved.
If anyone could help me I would be really thankful!
http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884
I've just tried this, didn't work also. I even had to flash the recovery and the kernel again after trying to flash the file in the link, because the phone wouldn't boot normal or in recovery mode.
mcb25 said:
Hey,
I got a problem with my S2g. I'm currently on Android 4.1.2, with cwm 6 and blazing v-5 kernel. Both were flashed per odin and work fine. However I can't flash a custom rom. Every time I try it I'll get a Status 7 error. I've already tried 4 different ROMs and I'm really annoyed by now. I also tried to factory reset the phone before I flash the ROM, but it didn't make any difference. I also tried deleting the assert command in the updater-script file but somehow my changes in the file won't be saved.
If anyone could help me I would be really thankful!
Click to expand...
Click to collapse
Try using philz recovery on your phone. It should flash most ROMs fine.
gsstudios
gsstudios said:
Try using philz recovery on your phone. It should flash most ROMs fine.
Click to expand...
Click to collapse
I just did, I still get the Status 7 error. I tried to flash the cm 12.1 and the cm 13.0 nightly rom. I also tried deleting the assert command in the updater-script file but it still won't work. There was no Status 7 error but it still said "Installation aborted".
Does anyone else got an idea how to fix this?
http://forum.xda-developers.com/galaxy-s2/development/kernel-blazing-kernel-v16-t2275275
I used this Kernel, I just noticed, that it's only compatible with Android 4.1, 4.2 or 4.3.
I then tried to install the DorimanX Kernel for LP and MM (http://forum.xda-developers.com/galaxy-s2/development-derivatives/kernel-dorimanx-lp-5-x-x-t3145879) but my phone stucks at the boot screen.
mcb25 said:
http://forum.xda-developers.com/galaxy-s2/development/kernel-blazing-kernel-v16-t2275275
I used this Kernel, I just noticed, that it's only compatible with Android 4.1, 4.2 or 4.3.
I then tried to install the DorimanX Kernel for LP and MM (http://forum.xda-developers.com/galaxy-s2/development-derivatives/kernel-dorimanx-lp-5-x-x-t3145879) but my phone stucks at the boot screen.
Click to expand...
Click to collapse
Apologies, I only just noticed you have a i9100g, not a i9100. You can't just flash i9100 kernels as they simply won't work!
You can follow the guide in the CM13 OP here:
http://forum.xda-developers.com/galaxy-s2/development/rom-cyanogenmod-13-0-t3381511
gsstudios

[SOLVED] stuck on boot up sequence, different roms all the same

Hi there, i'm writing this in hopes of someone reading it who give me some pointers.
i was running for the last years on CM 10.2.1 but i thought it was time for an update. update to CM 11.2 worked but my installed apps were making some weird troubles so i decided to do a factory reset and there my trouble started.
i flashed to boot.img in fastboot, cleared cache with fastboot cmd
format \system, \data, \cache and of course dalvik
flashed rom CM 11.2 (from official cyanogenmod site) via recovery sideload
rebooted and as my thread title says was stuck on CM boot sequence
i tried different CM roms, but always the same result. system wont end the bootup.
i even suspected a problem with CMW v6.0.4.8 and flashed TWRP from the CM 12.1 thread here in the forum.
so in short i can flash boot.img, recovery, different roms but in the end can't get it to work.
i would really appreciate some hints what i could do differently or maybe were i go wrong.
if you need more info i'm happy to supply them to you.
Thanks in advance.
solved by installing a TWRP backup and boot.img what i found on a german android site.
i was also able after that to install CM 12.1 unofficial and its running now. but i'm totally stumped what caused this weird problem to begin with. doesn't really matter now, i'm relieved it worked in the end.

Categories

Resources