Dear All
Today i did update my ROM via KIES to JB 4.1.1
The ROM is :
AP: I9300XXDLJA
CP : I9300XXDLID
CSC : I9300OJVDLJ1
The Problem : i feel the phone start Heat when i use it normal use !
no custom kernel it is STOCK
Normal use : it is like check gmail , see some RSS via Google reader .
Heat : you feel the phone worm near home button , and kip increasing, to be hot !
History :
I did flash some roms ... al stock / ICS / JB .. Each time i install JB .. i feel heat started!
I did use Triangle a way one time | but i dont think it is related cos before using Triangle a way and when installing JB heat start present !
I did NOT flash any custom kernel ever !
How can i be sure it is not a hardware problem ! the phone is working fine and fast but this worm problem headache me.
I did activate the Show CPU Load
the load average is
when i turn on the phone the load is
22.4 / 15.33 / 7.54 and kip going down while using the phone :
13.4 / 4.33 / 2.54
4.25 / 3.47 / 2.4
but the heat kip going up !
PS : the phone is formatted "Wipe Data" /User /Cash
PS : I did set the developer section - > Limit process -> 3 (Just to see if this will help cooling the phone it is under test !)
The phone is not rooted / "BTW" if i want to root the phone via "CF-Root-SGS3-v6.4" how can i flash the official Kernel back !
Please advice
Please kindly advice
Advice is to read all the other my phone is to hot threads and not start yet another one .
jje
Related
DISCLAIMER : I donno much about rooting and ROMS and all , pl forgive my ignorance and innocence ;P
Hi i have this fascinate which came to me with latest ROM , ( the one in which at boot screen you can see honeycomb )
i guess it was 2.9.2
accidently i hit the factory reset in the PRIVACY option of the settings , now the phone is in emergency mode with just two options EMERGENCY and SEND
as the number in it is alreday activated , so whenevr i hit send all i hear is your number is alreadyactivated but then the phone showz programming unsuccessful.
pl help me remove that
also in my quest to actiate i even updated a new ROM myself with ODIN : with EB01_DXC.tar.md5 ROM , still same thing about emergency mode only.
what i want now is
1.. how to reemove that emergency mode
2.. how to get and install the latest most stable ROM for indian reliance services
regards
Hello guys ,
I have been facing this problem for quite some time now . I installed the official MIUI 2.1.20 with all the necessary instructions and step performed . The ROM works just fine , but all of a sudden a process named " Download Manager" starts and it boggs down the CPU with 50% usage , the phone heats up then . here is what i already did
*Installed OS monitor
*Formatted the internal/external memory
*Clear data for Download manager
*Installed Siyah Kernal
Now after all of the above steps the download manager process goes away , but after a few hours it come back , and the battery starts to drain very quickly and the pone gets v hot. This problem is also present with the Galnet version of MIUI .
I need some help guys , i love MIUi and want to use it more . I would be very thank full if anyone can point me in the right direction to fix .
Try the MIUI forums for support.
Will surely do that !
In the meantime if someone here can help me out ?
As soon as i download something from the market this process comes back
Hi there,
I have been using Arta's ROM for a long time (with lots of GPS issues though, despite trying to fix it the way Arta's explained it...), I finallly installed a new ROM (Pacman "pac_p760-4.3_kitkat-20140128" if i'm right), I already had some doubts about my battery (BL-53QH / 2150mAh) and it seems that it is down for good
I can't even start the phone after all I tried (thought I could roll it back to the latest firmware but the LG software said it was already installed...)
I already tried everything possible : hard reset (which doesn't work since i installed "CWMv6.0.4.5Touch"...), fastboot didn't get me farther though, the only thing I can see when I start it is the LG Logo...
The power adapter works fine on an Xperia M2, so I checked the battery and here is what I get after trying to full charge it on the phone :
Saying that 1 is the + :
1 to 2 : 2.49v
1 to 3 : 2.65v
1 to 4 : 2.05v
Battery specs : 3.8v / 2150mAh / 2013.01.17(L) / EAC61898401 LLL
Anyone could confirm my doubts ?
Thanks
Helloo..hi guys..
Im Zaighi Chohan From Pak. I built my own custom roms and their mods...
I recently bought an S6 s6 edge and s6 edge plus.....
Preety cool phones . . . But many users reported overheating and other lagging or something like issues..
So 'im here to solve all your problems with these galaxy devices..may work with other devices too..
Ok so lets start...
1)download a correst csc rom for your device from sammobile.com.
2) flash it through latest odin...odin 3.07 wont work use odin 3.10.6 or 3.10.7?
3) next insert the downloaded rom to the AP section on odin..
4) make sure u have checked the ( Nand Erase All ) from options button.?..pit file is not required skip it..
5) when the phone boots up ..setup it ....on setting up uncheck all the dialog boxes...remeber to do this....
6) after all setup .... go to playstore and update all apps including system apps bcauz newly updated apps comes with more stabilities and improvements...
7) i know your phone is overheating at that moment .it is fine.do not plug phone on charger when apps are being updated.
8)once u have done updating all the apps.reboot the device.
9)go to settings and more connection setting ..turn off nearby devices option there to save battery..also the printing service is must be disabled to save more juice.
10) give your phone a 1-2 hours rest after doing all these things...dont plug your charger..u must have to charge it before start reading my thread..
11) after some days ..u will see no more lags..home power button fast wake locks..
12)apply a black colour wallpaper on your homescreen..i prefer to search on google (the iphone 6 flower wallpaper )
Set it on homescreen..and save more juice of battery...
NO ROOT REQUIRED HAHAHA..JUST MANAGED THE DEVICES CAREFULLY IS THE BIGGEST THING!
DO WHATEVER U WANT TO DO WITH YOUR PHONE ...
THNXX .BY
Im pretty sure that this thread will help u....!
For questions.= write down
Hello, i have XOLO Q700S ( android 4.4.2 ) with stock rom. ( rooted several times in the past and unrooted )
PROBLEM :
Phone gets stopped for a couple of seconds and screen is not responding. ( touchpad )
i see " slot2 " & "slot1" : " no sim found" message . it should happen only when we get out of airplane mod or restart the phone ( or power on the phone if its off )
so why does this happen? it happens like every 10-15 minutes.
( i havent flashed any custom ROM yet, BUT i had the phone dropped off from 3-4 feet < accident > once )
should i re-flash the stock ROM ?
Kernal version : 3.4.67
Build number : XOLO_Q700S_S006_28072014
(( if any further informations are needed, leave a reply. i will try to give that detail asap ))
Thanks in advance!
17-10-2016 ( update) - i have noticed significant increase in boot time.