Related
WARNING : I have no time to translate to English so i use google to translate please translate it if you can !
Hello,
Today I would like to introduce to you a set of tools dedicated to Sony Xperia SP. Many of these features are essential to optimize your loved cricket, and hopefully this time I will be back with sony many contributions to her son: D
1. Version:
+ V1.0: The trial version first.
2. The function:
+ Root
+ Unlock BL
+ Backup TA (very important before Unlock BL)
+ Install CWM
3. Instructions to use:
- Download and install PC Companion: http://www.sonymobile.com/vn/tools/pc-companion/
- Connect your phone to the computer.
- Open PC Companion and click on the Start button to load the driver as the adb for the SP!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Disconnect the phone cable from the computer.
- Download and install FlashTool:
http://d-h.st/Kb8
Click to expand...
Click to collapse
- Download and extract tool Xperia SP Tool Kit:
http://www.mediafire.com/?h3cixdcihd2hy37
Click to expand...
Click to collapse
- Run the file disable_driver_signing.bat to disable security when installing drivers on Windows 8, Windows 7 does not need offline. Your PC will restart.
- Go to the directory you installed earlier FlashTool (usually C: \ FlashTool \ drivers) run Flashtool-drivers.exe and select flashmode and Drivers Fastboot Drivers to install!
- Run FlashTool up and thunder click> choose to flashmode and click OK> Click the button ... select the path to the folder Xperia_Tool_Kit> Firmware you will see the same two lines appear, choose which is Version is 12.0.A.1.257 and press Flash button.
- Turn the phone off, hold volume - and plug the cable into the computer. FlashTool to flash the kernel to the machine!
- Run as Administrator XperiaSP_ToolKit.exe up, by right clicking on the tool select Run as Administrator (if using Windows 7/8)
Enable USB debugging on your device in Developer options!
On Unknow sources of Security on the phone!
Click to expand...
Click to collapse
- Tool will automatically identify your computer and is up 5 choices.
- Select the number 1 is the Root to Root machine. If rooting fail please run it again !
- After rooting complete continue flash use flashtool as above but choose the kernel is Version is 12.0.A.2.245.
- Turn on your phone.
Next is the most important part is the Backup TA. Before you unlock your phone, you are advised to take back up later TA warranty or goes back to relock without losing DRM keys
Click to expand...
Click to collapse
- Select option 2 to backup or restore the TA. When backup or restore your noticed the phone screen will light up your screen and click unlock agree when asked root.
- Choose the third option to Unlock Bootloader. You will be prompted for the unlock sequence was taken from Sony. The phone will automatically into fastboot and do things: D
- Select option 4 to install CWM (install new bootloader unlock type). The phone will automatically into fastboot and do things: D
*PS: Guide to root plant is due to its complex root guide for computers running the latest firmware 12.0.A.2.245. The older firmware, you can skip two steps before and after flash kernel root!
** Tool have used a combination of tools such as Root and Backup TA DoomLord of DevShaft
================================================== =====
Link download the latest firmware Stock Xperia SP:
https://docs.google.com/uc?id=0BwIPr1kDYTctakx1RmNxVDBVd3M&export=download
Click to expand...
Click to collapse
Over 120 views but no one comment ?
Hi, thanks you for this tool kit.
It works fine for the moment for me, I try a backup TA and it works
I'll try the others options later. Good job :good:
Anyone can help me translate all #1 in english please ? i use google so may be not correct in here !
The English is fine.
Sent from my C5303 using xda app-developers app
haha good job ^^ do you try it ?
link is dead for flash tool
Done link fixed !
I successfully completed most steps until:
"Choose the third option to Unlock Bootloader. You will be prompted for the unlock sequence was taken from Sony. The phone will automatically into fastboot and do things"
On Toolkit I get:
Please enter an unlock code: (I press enter)
Rebooting to fastboot
Unlocking... (phone reboots)
< waiting for device >
and nothing... My laptop detects the phone as normal, but Toolkit does nothing, just says < waiting for device >
Also, even though it said rooting was successful, the root checker apps say my phone is not rooted...
Ypnos said:
I successfully completed most steps until:
"Choose the third option to Unlock Bootloader. You will be prompted for the unlock sequence was taken from Sony. The phone will automatically into fastboot and do things"
On Toolkit I get:
Please enter an unlock code: (I press enter)
Rebooting to fastboot
Unlocking... (phone reboots)
< waiting for device >
and nothing... My laptop detects the phone as normal, but Toolkit does nothing, just says < waiting for device >
Click to expand...
Click to collapse
What's is your unlock code ? you have to enter your unlock code here to unlock your phone ! Not enter without any code !
If you root fail after flash kernel 1.257 please root it again it's work
quangnhut123 said:
What's is your unlock code ? you have to enter your unlock code here to unlock your phone ! Not enter without any code !
If you root fail after flash kernel 1.257 please root it again it's work
Click to expand...
Click to collapse
I don't have an unlock code...
Just go to sony website to got an unlock code !
Does unlocking bootloader erase the internal memory?
Sent from my C5303 using xda app-developers app
Yes it's does so you have to backup internal storage first !
quangnhut123 said:
Just go to sony website to got an unlock code !
Click to expand...
Click to collapse
A google search doesn't give any hits for unlock codes on the official sony website...
Ypnos said:
A google search doesn't give any hits for unlock codes on the official sony website...
Click to expand...
Click to collapse
http://unlockbootloader.sonymobile.com/instructions
how to backup TA on 2.254 kernel
Hi, Thanks you again for this tool.
I successfully backup TA and unlock my bootloader easily with your tool
Good Job :good:
thanks for this handy tool. it helped alot in installing CWM for unlocked bootloaders.
edit: cwm has some problems mounting sd card when doing a backup to external sd card. anyone facing this issue ?
How To Root Galaxy Win or Galaxy Grand Quattro (GT-I8552)
Best viewed in a Web browser. The pictures won't appear as intended in the XDA app.
One of the bit.ly/shortened URLs linked in this guide which directly leads to the download page of the file may be blocked by a security feature. They're all safe. Once you click a link you may be warned by your browser for accessing the URLs, but fortunately, the Warning page has a part where there's an option to proceed with accessing the page, just proceed and click the link. See example below.
bitly suggests that you
Change the original link, and re-shorten with bitly
Close your browser window
Notify the sender of the URL
Or, continue at your own risk to: http://download.clockworkmod.com/drivers/SAMSUNG_USB_Driver_for_Mobile_Phones.exe[/COLOR]
If you get no warnings, much better. Let's proceed.
The Preparation : Before you start, make sure that . . .1) You have a PC / Laptop running Windows Platform
2) Samsung USB Driver for Mobile Phones (click to DL from clockworkmod.com) is installed
3) Phone battery power is at least 70%. That's good enough to not run out of power during this whole process.
4) Its USB Debugging is enabled (Settings > Developer Options > USB Debugging)
5) You have a USB Cable to establish a connection between the phone & your computer
6) You have the files needed. Keep three files in one folder.
- twrp_2.8_material - 9185 KB (click to DL directly from its dev's (Gody) MediaFire drive)
- Odin3-v3.09.zip - 972 KB (click to DL from sammobile.com's MEGA shared cloud storage) This software runs only on Windows platform.
- SuperSU_v1.94.zip - 1,703 KB (click to DL direclty from chainfire website)7) A copy of that flashable zip file "SuperSU" must be saved in your phone's memory, internal or external .
1st Step : Flashing TWRP Recovery Via OdinWhat is Recovery? | The Two Android Recovery Agents (CWM & TWRP)
Here, we will use TWRP Recovery. We will install it on the device using the Odin software.
Required: your phone, Windows PC, USB cable, Odin, and TWRP (.tar file)
1) Boot phone to "Odin Mode, a.k.a. Download Mode" by pressing the buttons at the same time: Volume Down, Power, & Home. When the device vibrates, immediately release the Power button while still pressing the other two until the Download Mode's warning screen appears.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2) Press the "Volume Up" button to continue to Odin Mode
3) In your computer, using WinRar or 7-zip, extract the Odin zip file, then run Odin3 v3.09.exe as Administrator
4) Connect your phone to your PC via USB. It should say "Added" on Odin.
5) On Odin, click the "AP" button, find and select the "twrp_2.8_material.tar"
6) Click "Start" to proceed in flashing the TWRP Recovery. *This takes about a minute.
7) It's partially finished when it says RESET! with these three lines in the message box.
RQT_CLOSE !!
RES OK !!
Removed!!
Then, phone will reboot automatically to OS.
8) Sometimes it takes a few more seconds after the phone has rebooted for you to be able to completely close Odin. Just wait for Odin to change its status from RESET! to PASS! and say All threads completed. (succeed 1 / failed 0), as shown in the picture below.
Then, you may click Exit and disconnect cable.
TWRP 2.8.5.0 Recovery is now installed.
And this is how to boot to "Recovery Mode". Press the buttons at the same time: Volume Up, Power, & Home. When the device vibrates, immediately release the Power button while still pressing the other two until the SAMSUNG boot-screen appears. See photo instructions below.
By the way, see the pictures below for the difference between the Galaxy Win's stock recovery and TWRP's recovery.
Important : NANDroid Backup
At this point, with TWRP Recovery installed, you can now create a NANDroid backup. It's a backup of literally everything in your phone - System, Cache, Data, EFS, and Boot. It is considered to be the top priority of things to do before messing with your phone i.e. flashing ROMs, kernels, or apps. After you create a backup, the backup file would be located in "sdcard0/TWRP/BACKUPS/" for internally saved backup, and "extSdCard/TWRP/BACKUPS/" if it's saved to the external memory. This file can also be transferred to a different storage, say a hard-disk, if you need to have more space on your phone for something else. You may skip to the actual rooting part. But, in case you do want to create a backup just follow the simple steps below. 1) Boot phone to Recovery Mode
2) Select Backup
3) This part lets you name the backup file with whatever name you want, choose whether to save it internally or externally, and pick which stuff you'd like to backup. And when you're ready, swipe to backup.
*This may take 5-10 minutes depending on how big your whole current installation is.
4) Once done, you may proceed with the 2nd part of this rooting guide.
2nd & Final Step: Flashing SuperSUSuperSU allows for advanced management of Superuser access rights for all the apps on your device that need root.
Required: your phone, and SuperSU (.zip file)
1) Boot phone to Recovery Mode
2) Select Install
2) Locate the zip file SuperSU
3) Go ahead and swipe to install SuperSU *This takes just 5-10 seconds.
4) Reboot System
You now have root access. Good luck!
Important Reads After Rooting An Android Device:
What Is A Nandroid Backup and How Exactly Does It Work?
TriangleAway – Reset Flash Counter Tool
11 Things To Do After Rooting Your Android Smartphone | RootMyAndroid.Org
Suggested ROM:
COSMIC 2.0 ROM (released 4/27/15) (CM10). Rated to be the most stable custom ROM for the device.
Originally developed for Galaxy Core Duos by dev abhi922, then ported by dev gody420 to work on Grand Quattro.
Hey mate, thanks a lot! Your guide is very clean and objective. Links shown properly. You did a good job!
But I'm still facing a problem on my I-8552B. Whichever Recovery I try to flash, I keep getting a black screen.
I tried the one you posted and the 6.0.3.7 version, but nothing different. :/
Thanks! I'm as glad that this guide is helpful to us who need it.
When does this black screen appear?
What have you done so far?
Sent from my GT-I8552
The phone is working properly, I can boot into the system normally. But after I flash any custom recovery via Odin (all I tried, so far), and boot into recovery (phone off, VOL +, Home and PWR boot), I get a black screen.
I've read that people are getting this issue on devices bought after July/14...
Please refer to this thread for more ideas.
http://forum.xda-developers.com/showthread.php?t=2977978
Best of luck!
Sent from my GT-I8552
Hi. .when my galaxy win was rooted, the task manager was deleted. Is there a way to recover it plz. .tnx
Sent from my GT-I8552 using XDA Free mobile app
[Root ,Easy ,Fast No Pc! ]
:angel:Visit the link: http://forum.xda-developers.com/grand-quattro/general/root-grand-quattro-win-duos-t3091676
Good Share
Thanks for clear share;
1- Odin3-v3.09.zip link dead
2- I download the v3.07 and It works only AP = PDA
3-I like the TWRP screen
Thanks again
i'm too having the same problem..after flashing custom recovery, the screen goes black when i try to enter recovery mode
Samsung Galaxy Win GT-I8552B
Excellent tutorial, but I could not install SuperSU, my phone model is
Samsung Galaxy Win GT-I8552B
Version: 4.1.2
Can you help me?
Best regards
Roosevelt Paz Garcia
I am stuck at 'starting adb sideload features' in adb sideload. Please suggest what to do?
I am not getting the install option on the recovery boot
someone help plz
No need to unlock bootloader for samsung ???
Is it??
Hi all. I bought my Evo 3D phone from someone and the wifi is not working. Trying to turn it on just results in "Error". Apparently this is rooted and/or has custom firmware. The software is NegaLite BluROM with android 4.0.3. I was wondering if anyone could help a root/cfw newbie with step by step instructions on how to get wifi working again. My google research showed something about a Mobster ROM being the best firmware, but have no idea about anything.
i like negalite the best, but what release is it?
i also liked mobster lite and unsenseable.
negalite blurom cdma vm r115
try the official thread here:
http://forum.xda-developers.com/showthread.php?t=1745093
i use jcfunk's fork, its more recent and you might even get something hot off the press if you check out his svn.
midnight rom deserves a mention:
http://forum.xda-developers.com/showthread.php?t=2141207
i'm not sure where mobster went, i'll hunt a link down later if you need. same with unsenseable.
jawbonegroove said:
try the official thread here:
http://forum.xda-developers.com/showthread.php?t=1745093
i use jcfunk's fork, its more recent and you might even get something hot off the press if you check out his svn.
midnight rom deserves a mention:
http://forum.xda-developers.com/showthread.php?t=2141207
i'm not sure where mobster went, i'll hunt a link down later if you need. same with unsenseable.
Click to expand...
Click to collapse
I yes, latest is on svn, but latest zip negalite-funk_mod_v3.zip
hey jcfunk i replied to the official thread. i tried the update but wifi still won't work
Are you s-off or just unlocked?
jcfunk said:
Are you s-off or just unlocked?
Click to expand...
Click to collapse
i never knew what s-off was. i rebooted into recovery and it turns out i have s-on. then i googled and found Unrevoked, but the download doesn't work.
Here I can quick fix your phone, download recovery on computer.
ReBoot phone into bootloader.
From computer,
fastboot boot recovery.img
This will upload recovery.img to phone, and boot recovery with write access to boot partition. Which HTC has locked, this is first method found to by pass. Other would be dumb-lock. But that's your wifi issue, because your still using stock kernel, but wifi drivers are built for my kernel
jcfunk said:
Here I can quick fix your phone, download recovery on computer.
it just says Bootloader, Reboot, Reboot Bootloader. those are my options i'm not sure what to do
Click to expand...
Click to collapse
Also, can use Flashify to install a boot.img but won't work with installer zip for my kernel, because boot.img is made during install.
May look like this, fastboot shows when usb is plugged in.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yeah the screens look like that but i tried all the options. i don't know how to install your image
InvisiSource said:
Home of the ORIGINAL hboot 1.50 'how to flash'
less than 48 hours after HTC released their web based unlocker, i walked a user thru the process below in public chat (the public Synergy Chat room) - two hours later some one posted it on XDA and claimed creait for it, even copied/pasted my spelling errors. when called out with screen shots of the chat with timestamps, they still claimed credit. - this is the ORIGINAL.
This is a cleaned up and detailed version of the chat, I included it as 2nd post to my roms and always posted it when someone needed help. so a few weeks later, i finally decided to make a post here.
---
so, you unlocked using HTC's unlocker located at HTCDEV.com
some background on this unlock method:
-when you unlock using HTC's unlock method, the boot partition is still read only, and you cant flash to it. (kernels and ramdisks go here - so no 2.3.3 rom will boot, and most 2.3.4 roms will not work correctly)
when you unlocked your bootloader using HTC's method, you should have downloaded a file that contained some program files, mainly fastboot.exe and adb.exe, as well as the device drivers you would have to install to unlock
- you will need these
to get around this problem HTC has created, we will be using the fastboot.exe program to force the ramdisk/kernel onto the phone. anytime you use fastboot to flash a partition, you risk bricking your phone, so please do this at your own risk.
I have walked several people thru this, and no one had any problems, but if something dont go right, or the connection between the pc and the phone gets interrupted, your phone may become bricked.
I am going to assume you know the basics of flashing a rom, and that you have either teamwin or clockwork's recover tool installed on your phone (and you know how to use them). if not please see series #3 below.
SERIES 1 - INSTALL A ROM AND RAMDISK/KERNEL
Step 1 - backup everything on your phone, nandroid backup
step 2 - if you want to flash the ext4 optimizer for /data, read the info and directions here -> http://forum.xda-developers.com/show...postcount=6329
------>everything should be backed up now
Step 3 - flash Virus's superwipe tool.
Step 4 - flash the /data optimizer tool - the download can be found in the post linked in step 2
Step 5 - open the rom you downloaded using winrar, or 7zip, and copy the boot.img file somewhere (the same folder that contains the tools you used to unlock your phone would be a perfect place)
Step 6 - open a command prompt (or terminal window), and goto the window that contains the tools you used to unlock your boot loader
Step 7 - reboot your phone into fastboot (adb reboot bootloader)
Step 8 - from the command prompt enter the following command:
fastboot flash boot boot.img
then press [enter]
Step 9 - once complete, exit fastboot, and boot back into recovery
Step 10 - flash the rom's zip file using recovery
Step 11 - enjoy
SERIES 2 - INSTALL A RAMDISK/KERNEL (ROM ALREADY FLASHED)
*signs of a failed ramdisk flash include broken wifi, 4g, poor performance and just weirdness in general. the updater scripts used to install a rom will not flash ramdisk with S-ON.
Step 1 - open the rom you downloaded using winrar, or 7zip, and copy the boot.img file somewhere (the same folder that contains the tools you used to unlock your phone would be a perfect place)
Step 2 - open a command prompt (or terminal window), and goto the window that contains the tools you used to unlock your boot loader
Step 3 - reboot your phone into fastboot (abd reboot bootloader)
Step 4 - from the command prompt enter the following command:
fastboot flash boot boot.img
then press [enter]
Step 5 - reboot your phone and enjoy (fastboot reboot)
SERIES 3 - INSTALL A RECOVERY TOOL
*you may need to do this before each flash, some phones somehow break recovery after a rom is flashed, and recovery will not launch until re-flashed for some reason (Kathy.. )
Step 1 - download TeamWin's recovery here (IMG format) -> http://dl.dropbox.com/u/24995663/recovery.img
Step 2 - copy this file to the same directory as your fastboot and adb files HTC had you download to unlock your phone.
Step 3 - goto your dos prompt (or terminal if on linux)
Step 4 - change directories to the folder your files are in (recovery.img and fastboot)
Step 5 - flash your recovery using the following command
fastboot flash recovery recovery.img
Step 6 - reboot your phone (fastboot reboot)
*disclaimer - you do this at your own risk. as of yet, the processes listed above work 100% and not 1 failure has been reported. make sure your usb cable is good, and your pc has good power during any fastboot process. most of this comes from a chat i had in the synergy public/general chat room 2 hours prior to it being posted on XDA by others claiming credit. kangers goto hell.
fastboot for mac and linux attached below:
ADB and FASTBOOT for windows:
View attachment 330
Click to expand...
Click to collapse
Here is a quote from other site
I assume Series 3 is the part I need to follow? Do I do this during recovery mode or normal phone mode? Because I don't know the file directory of my phone
kracovwolf said:
I assume Series 3 is the part I need to follow? Do I do this during recovery mode or normal phone mode? Because I don't know the file directory of my phone
Click to expand...
Click to collapse
Yes, but post was very old, use recovery I posted. Also if you use command
Code:
fastboot boot recovery.img
instead of
Code:
fastboot flash recovery recovery.img
It will load/run recovery from computer, then install kernel from recovery.
Who took the credit for your guide?, just wondering
PiggyFlooper said:
Who took the credit for your guide?, just wondering
Click to expand...
Click to collapse
What do you mean? The quote I posted?
Disclaimer: Im new and i'm not that good at english,im not responsible for bricked devices.
So for the past month i've been through a journey of tryng to break through huawei's draconian security and i can proudly say that i finally did it, i installed a custom rom on my FIG-LX1
I've read a lot of sources and it all seems to be all over the place so i'm going to try and make this as easy as i can for you.
1.First of all ,if you want a custom rom go to OpenKirin ( https://openkirin.net/devices/) and choose your rom and see if you need to upgrade/downgrade your emui and also if your device is supported.
2.For the bootloader you have two options
a) The paid one, use sigma key or dc unlocker
b) The free and geeky one. Attention you'll need to open up your phone, which is honestly not that hard and you can pay a pro to do this for you for like 5 bucks .This method is pretty straight forward:\
1.Go to Potato NV (https://github.com/mashed-potatoes/PotatoNV) , see if your device is supported and download the software
2. Now comes the hard part, you need to take off the back cover of your device. Shut down your phone, then take your phone cover off, then you need to search google for your test point. For example for me it was Fig lx1 test point (device model+ test point)
3. When you located the test point youll need to short it with the motherboard shield. In their tutorial they said that youll need to solder it ,but it can be done easier. You need just a very small piece of wire and someone to plug the device
Here's how the process looks:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4.Open potato nv software. Now you need another person to help you. Hold the phone , touch the test point and the motherboard shield and keep them shorted while the other person plugs the usb cable from pc to phone. U should hear the connection sound from windows and the CHARGING LOGO SHOULDN'T APPEAR.
5. Now you can stop shorting the test point and the shield, but keep the phone connected to PC.
6. In potato Nv choose your cpu and unlock bootloader
7.Now your bootloader is unlocked ,if any problems you still have the bootloader unlock code
Back to roms and twrp .
Now you should see this messagge appear:
This menu is very important for changing the rom ,cause every rom needs emui 9 or 8 to be installed and from here you can reinstall the stock emui after flashing custom rom but we'll talk about it later.
Now for flashing twrp.
Boot the device into bootloader mode(shut down ,then hold power+ volume down until huawei appears on screen or Better and easier and useful for later download android platform tools from SDK Platform Tools release notes | Android Developers (developer.android.com/studio/releases/platform-tools).Plug the device into pc,enable usb debugging . Open a cmd and open the folder location .Example
Code:
cd C:\Users\USerName\Desktop\platform-tools
and type
Code:
adb reboot bootloader
. You should see that your bootloader is unlocked
Download android platform tools (developer.android.com/studio/releases/platform-tools)
Now find your twrp img for your phone , rename it to recovery.img and put it in in the platform-tools folder
Now in terminal open cmd in platform tools folder and type
Code:
fastboot flash recovery_ramdisk recovery.img
Now you have twrp installed
Note that you wont use it neither for rooting with magisk neither with installing custom rom.
Installing custom rom:
Open kirin has a very good user guide and i suggest you to follow it: OpenKirin (openkirin.net/user_guide/openkirin-rom-installation-instructions/)
Btw their rom works with twrp
But it doesn't say how to switch your rom or go back to stock for switching you need to be on stock)
1.Go to Android File Host - Free file hosting for Android developers ( androidfilehost.com) and search for your build number (eg: FIG-LX1) and download a firmware emui 8 or 9.
2.Open the zip ,go to software and from here youll see a folder called dload, extract it somewhere
3.Now youll need a sdcard in your phone,plug your phone into pc and put the dload folder on your sdcard (it should bee on the root directory ,basically dont put it in another folder in sdcard)
3.You should've noticed already that every time you restart your phone there is a warning message sayng that your phone is unlocked( image above)
4.Press volume up for 3 seconds and it should take you to huawei recovery ,from here press wipe data and factory reset to kinda reinstall huawei recovery which youll use for dload
5.After wipe restart your phone ,press vol up + vol down + power until huawei logo to enter force update
6.Now wait for it to do its job and install emui.
*If it doesnt do anything , take the sd card out ,put it in another device ,open dload folder,find update.zip and put it on the sdcard instead of dload folder
7. To switch the rom repeat the steps from open kirin,note that if u had twrp youll need to install it again
Now the hardest part ,rooting...NOte that i tested root only on stock so your process can be diffrent but im not sure ,you cand try for other rom this process
For stock and no twrp:
1.Force update emui with dload method , needed for a recovery img.
2.On pc open dload folder ,open update.zip and extract UPDATE.APP
3.Now download huawei app extractor from here [TOOL] Huawei Update Extractor [UPDATED: v0.9.9.5] | OPEN-SOURCE LIBRARY | XDA Developers Forums (xda-developers.com) (forum.xda-developers.com/t/tool-huawei-update-extractor-updated-v0-9-9-5-open-source-library.2433454/)
4.Open the app and go to settings and untick every box you see
5.Now go to extract and extract the UPDATE.APP file
6.Now you should see a lot of nonsense,find recovery_ramdis.img ,left click it once, then right click for options and select extract selected
7. Now u should have a recovery_ramdis.img file.Move this file on your phone and install magisk manager.
8.Open magisk and press install in the tab with the mask(the first install button) tick the box with recovery mode, then select patch a file and select the recovery_ramdis.img file .Now it patches it. Then move the patched file to the pc again, to the platform tools folder
9.Enable usb debugging on the device and plug device to pc
10.Open cmd on pc and type
Code:
adb reboot bootloader
, or simply reboot to bootloader(shut down phone,then hold power + vol down until huawei logo appears)
11. In cmd type
Code:
fastboot flash recovery_ramdisk magisk_patched_yourfile.img
Dont forget to change the yourfile into your file name mine had something like this : jhfdU
12.Reboot your phone and voila u have root, if doesn't work go back to magisk press again install,tick recovery mode, but this time select direct install and this should resolve problems
Magisk official guide(kinda hard to understand) : Installation | Magisk (topjohnwu.github.io) (topjohnwu.github.io/Magisk/install.html#huawei)
Note that by this you'll remove your custom recovery .
IF U WANT TWRP i assume that you patch the twrp img file with magisk and flash i,t you can try it out and post your results or u can try to just flash twrp as is.
Hope i helped you !!
The BL unlocking tool for realme GT Neo based on realme UI 2.0 (Android 11) is here !
I AM NOT LIABLE FOR ANY DAMAGES, BRICKED PHONES, OR ANYTHING ELSE THAT HAPPENS. IT IS YOUR CHOICE TO FOLLOW THIS GUIDE, AND THE CONSEQUENCES ARE YOUR RESPONSIBILITY.
Support unlocking models
realme GT Neo (RMX3031)
[BL Unlocking Instructions] (Important!!!)
1. After unlocking, it may cause unpredictable effects on the phone;
2. The third-party firmware may make some functions of the mobile phone not work properly, for example, the camera function is not available, and may cause damage to the device;
3. It may cause the leakage of private personal information on the mobile phone;
4. After unlocking, it will affect the system upgrade, and users cannot receive the subsequent updated version of realme UI;
5. After unlocking, the phone status is equivalent to restoring the factory settings, all user personal data will be cleared, it is recommended to back up the data in advance;
6. After the phone is rooted, if necessary, you can contact the realme service center to assist in flashing the phone. If you can flash back to the official version, the warranty status of the phone will not be affected, but you cannot enjoy the return and exchange service; if you can’t flash back to the official version or the result Mobile phone hardware failure is not covered by the warranty and needs to be paid for repair according to the situation.
Click here to check offline service outlets https://www.realme.com/support/services
How to unlock BL?
Ready to work:
1. Download realme GT Neo special unlock tool APK:
2. Download and apply to unlock APK
Link: https://pan.baidu.com/s/1F7ZGGh9OmDoEhJmMPwO79w
Extraction code: h0xt
Link: https://lanzoui.com/b00o2iupa
or
https://drive.google.com/drive/folders/1Jp-tNhEuRNkRrj_juzv4-VgFmX9MA6Tc?usp=sharing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Keep the battery power of the mobile phone above 60%
3. Prepare a USB data line
4. Prepare a PC/Macbook
Officially begin:
Step 1. Open developer mode
Go to "Settings" → "About Phone" → "Version Information", click "Version Number" 7 times to open the developer mode;
Step 2. Open oemlock
Enter "Settings" → "Other Settings" → "Developer Mode", open OEM unlock;
Step 3. Use APK to enter fastboot mode
Connect to the network, open the APK, and apply for unlocking in the APK.
Step 4. Click "Start Application", please read the "Disclaimer" carefully and manually tick agree.
Step 5. Click "Submit Application" and then click "Return" to return to the application interface, and wait for about 15 minutes. You can check whether you have passed the review through "Query review status" on the application interface.
Step 6. Unlock fastboot
After the review is passed, click "Start Deep Test", the phone will restart to the START interface
(The following is a real shot of the unlocking process)
Step 7. Connect to the computer and run: fastboot flashing unlock
a. Go to https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads/ to download platform-tools for Windows
b. After downloading, unzip it to the root directory of drive c
c. Keyboard Win + R, enter CMD and then Enter
d. Enter cd.. and then Enter until C:\ is displayed
e. Enter cd platform-tools and then Enter
f. Enter fastboot flashing unlock and then Enter to continue step 8 of this post
Step 8. Follow the prompts on the phone interface, press the volume up button to select unlock, and after a three-second countdown, the phone will enter the interface of the picture on the right.
Step 9. The computer adb runs the command: fastboot reboot, and the phone will automatically restart.
Note: This restart will clear all user data.
Four, lockback tutorial
method one:
In the shutdown state, press the volume down button and the power button at the same time to enter the BootLoader interface, connect to the computer, and enter: fastboot flashing lock
The phone will enter the lock interface, the volume up key selects lock bootloader, after a three-second countdown, the phone will enter the interface of the picture on the right
The computer adb runs the command: fastboot reboot, the phone will automatically restart.
Method Two:
When the phone is turned on and connected to the computer, enter: adb reboot bootloader
The phone will enter the BootLoader interface
Input: fastboot flashing lock
The phone will enter the lock interface, the volume up key selects lock bootloader, after a three-second countdown, the phone will enter the interface of the picture on the right
The computer adb runs the command: fastboot reboot, the phone will automatically restart.
After the Bootloader is locked by either of the above two methods, please download and unlock the APK to complete the installation, and apply to exit the in-depth test on the application interface.
Once again, there will be the following risks when operating BL unlocking! ! ! Very important, must see!
1. After unlocking, it may cause unpredictable effects on the phone;
2. The third-party firmware may make some functions of the mobile phone not work properly, for example, the camera function is not available, and may cause damage to the device;
3. It may cause the leakage of private personal information on the mobile phone;
4. After unlocking, it will affect the system upgrade, and users cannot receive the subsequent updated version of realme UI;
5. After unlocking, the phone status is equivalent to restoring the factory settings , all user personal data will be cleared , it is recommended to back up the data in advance ;
6. After the phone is rooted, if necessary, you can contact the realme service center to assist in flashing the phone. If you can flash back to the official version, the warranty status of the phone will not be affected, but you cannot enjoy the return and exchange service; if you can’t flash back to the official version or the result Mobile phone hardware failure is not covered by the warranty and needs to be paid for repair according to the situation.
If the phone is abnormal after rooting, you can contact the realme service center for assistance. Service center outlets:
https://www.realme.com/support/services
For unlocking projects, if you have communication needs with the realme development team, please send an email to [email protected].
Source
Hello Guys, i found some new files related to new version of GT NEO coming from chinese website.
Link: https://www.realmebbs.com/post-details/1393555294172655616
Files: https://pan.baidu.com/s/1REDL0xw4ssb1SKhB19l4vg
Unlock code: 6a6b
I think GT NEO is currently on RMX3031_11_A.25 and i found files related to A.25 on link provided above. I hope someone can try this.
Screenshot:
The detailed version of BL unlocking guide
One, three deadly questions
1. Do you know what is to unlock BootLoader and what is root authority?
If you don’t know, it is recommended that you do not unlock BootLoader, let alone root.
2. Will you use adb and fastboot? Will you use TWRP? Do you know how to do double-clearing, card swiping, etc.?
If not, it is recommended that you do not unlock BootLoader, let alone root.
3. What do you do after unlocking Bootloader & root?
If you don't even know what to do, I advise you not to try it with curiosity, and unlock it only for people who really need it.
The important thing is said three times, there are risks in playing the machine, and you need to be cautious when you refresh the machine. Read the notes for this post carefully. Please be at your own risk for serious consequences such as the phone's failure to turn on or data loss, and the official after-sales service can help you flash back the official firmware. (If the hardware of the phone is damaged due to flashing, do I need to send the phone for repair, and may need to pay for repairs)
Two, unlock preparation
1. Apply for a realme account
Apply for Portal → https://id.realme.com/index.html
2. Download and apply to unlock APK
Link: https://pan.baidu.com/s/1F7ZGGh9OmDoEhJmMPwO79w
Extraction code: h0xt
3. Install APK and apply for unlock qualification
After reading the risk warning carefully, wait for the official release of the unlocking authority (about 15 minutes), and you can check whether it has passed the review through the "Check review status" on the application interface. After issuing the unlocking authority, apply for the APP to write the relevant information into the system, and then the following unlocking operations can be performed.
4. Backup data
Before unlocking, you can back up personal data, open-Settings-Backup Settings-Other Settings-Backup and Restore, back up important data, and then copy the built-in storage Backup directory to the computer or mobile storage, anyway, don't put it in the operation On your mobile phone, you can also backup very important data such as contact call records, short messages, etc. to the cloud. After unlocking the BootLoader, you can restore the data by yourself after you perform the required gaming operations.
5. Mobile phone settings and data preparation
①Settings-About the phone-Tap the version number 5 times in a row-prompt the developer option has been opened;
②Settings-other settings-developer options-turn on OEM unlocking and USB debugging;
③Download adb & fastboot command:
https://developer.android.google.cn/studio/releases/platform-tools
●Download SDK Platform-Tools for Windows window operation
●Download SDK Platform-Tools for Mac Mac operation
●Download SDK Platform-Tools for Linux Linux operation
After the download is complete, restart the phone to enter Fastboot mode.
Three, unlocking process
1. Decompress the file just downloaded on the computer, open it, and put it in the C:Windows\System32 directory of the C drive, as shown in the figure;
2. Win+R open the cmd window, enter adb reboot bootloader / open the depth test APP, click to start the depth test (both methods are available);
3. When the phone restarts, you see DEVICE STATE: locked, indicating that the BootLoader is in a locked state at this time;
4. Start unlocking:
After connecting to the computer, enter fastboot flashing unlock or fastboot flashing unlock_critical in the computer cmd window
5. Ask if you want to unlock, use the volume key to select UNLOCK THE BOOTLOADER to confirm the unlock, and select DO NOT UNLOCK THE BOOTLOADER for "No" (it’s too late to regret at this time), and confirm with the power button;
6. At this time, the phone will restart and enter the recovery mode to format the data partition, and then automatically power on. Congratulations, the phone has been unlocked successfully.
Fourth, check the unlock status
1. Open the cmd window on Win+R, enter adb reboot bootloader /open the depth test APP, click to start the depth test; (both methods are available);
2. Enter Fastboot mode again, you can see DEVICE STATE: unlocked;
3. It means that BootLoader is unlocked at this time, and you can use fastboot flash [partition name] [file path] to flash the file;
4. Flashing TWRP into the player in FastBoot mode. Flashing twrp.img into the recovery partition. (twrp needs a competent person to compile);
5. fastboot flash recovery twrp.img;
6. Select recovery mode with the volume button, press the power button to confirm, and enter TWRP (recovery mode).
Five, lethal science
1. What is to unlock BootLoader?
BootLoader runs before the operating system kernel runs. It can initialize hardware devices and establish a memory space map, so as to bring the system's software and hardware environment to a suitable state, so as to prepare the correct environment for the final call of the operating system kernel. In embedded systems, there is usually no firmware program like BIOS, so the loading and starting tasks of the entire system are completely completed by BootLoader.
2. What is root authority?
Root authority means that the mobile phone has the highest authority. For example, the administrator of the computer can modify the mobile phone software and some functions of the mobile phone at will.
3. How to use adb and fastboot?
We don’t use much here:
adb reboot bootloader reboot into, bootloader mode
fastboot flashing unclock unlock bootloader mode
fastboot flash recovery xxx flash files to recovery partition or boot partition
fastboot flashing lock lock bootloader mode
4. How to use TWRP? How to perform double-clearing, card swiping and other flashing operations? What can I do after rooting?
①TWRP uses double clearing: Homepage->Clear->Slide to restore factory settings (this operation will delete files in your data partition except the built-in storage).
②Format Data: Homepage ->Clear ->Format Data ->Enter yes (this operation will clear all files in your data partition, including built-in storage.
③Card swiping: Homepage -> Installation -> Browse to the card swiping package you need, click and swipe to swipe in.
④Backup: Homepage -> Backup -> Select the partition you need to back up -> Slide backup.
⑤Restore: Homepage ->Restore ->Select the version to be restored ->Select the partition to be restored ->Slide to restore.
⑥Advanced: Homepage->Advanced->File Management; Homepage->Advanced->Terminal command line can enter terminal commands.
⑦After rooting, we can modify: software, user data, system, or flash into the three-party system. (Three-party system needs to be adapted)
Do I need to rollback to A.19 version before applying the scripts to my GT Neo?
Any TWRP supported file link?
hello. Does Realme GT Neo have any rom ? i cant find anything about this phone ? So weird