Introduction:
Hello, I have solely prepared this ROM for LTE users although I don't own the LTE variant, this ROM is meant for people who want a stock feel with minimal tweaks, for people who want to have my mod for the MultiWindow Complete Control found in the international forums, or for modders/ROM cookers for me to provide them with a good base.
Click to expand...
Click to collapse
Features:
- Completely Stock
- Non-Wipe
- Deodexed
- Zipaligned applications
- Fully Rooted
- Installs busybox automatically
Click to expand...
Click to collapse
Notes:
I repeat that I don't have the LTE variant, so I was unable to test it, If someone is interested in providing me with information after installing the ROM so I can be sure everything works as it should, that would be superb.
I will provide you with simple instructions to test some things in the ROM.
Click to expand...
Click to collapse
Downloads:
LJ5 (Link Added again, please post any issues you face)
Click to expand...
Click to collapse
One last thought:
Enjoy the ROM, I'll be happy to provide any necessary help.
A question: Would you be interested in an LJ4 version, although LJ5 is newer?
Click to expand...
Click to collapse
Maybe I'll need this, who knows?
First! Thx Legendk95
Good news, just booted into your ROM successfully.
Bad news, status 7 on modem and kernel stage of your install script.
Update: broke gapps. Lost root.
---------- Post added at 02:12 PM ---------- Previous post was at 01:16 PM ----------
Okay, I am not sure how this occured, but the following issues also occured.
When realised I had no root, went to get it back in CWM
When trying to get into CWM would hang.
Could not get in at all.
When trying to plug into PC using ADB, PC could not recognise USB device.
Phone only said charging.
Booted phone into Odin
Odin shown an increase of 1 on flash counter
I flashed recovery file from Toolkit and have everything working again.
Not sure how above is possible, but don't go flashing this on your phone until LegendK95 has looked into it.
cvtem said:
Good news, just booted into your ROM successfully.
Bad news, status 7 on modem and kernel stage of your install script.
Update: broke gapps. Lost root.
---------- Post added at 02:12 PM ---------- Previous post was at 01:16 PM ----------
Okay, I am not sure how this occured, but the following issues also occured.
When realised I had no root, went to get it back in CWM
When trying to get into CWM would hang.
Could not get in at all.
When trying to plug into PC using ADB, PC could not recognise USB device.
Phone only said charging.
Booted phone into Odin
Odin shown an increase of 1 on flash counter
I flashed recovery file from Toolkit and have everything working again.
Not sure how above is possible, but don't go flashing this on your phone until LegendK95 has looked into it.
Click to expand...
Click to collapse
Not sure what I did wrong.
Thank you for your feedback, I will look into that as fast as possible!
LegendK95 said:
Not sure what I did wrong.
Thank you for your feedback, I will look into that as fast as possible!
Click to expand...
Click to collapse
Just so your aware, still running your ROM, but had to do above and re flash gapps.
Been able to stick aosp components in now, so the deodex etc.. all worked well.
thank you so much for the great job.
Warren87 said:
thank you so much for the great job.
Click to expand...
Click to collapse
Glad you like it. Did you have any problems?
Thanks in advance! Would love to see LJ5 on N7105.
So...
Have u solved the problem earlier.
Sent from N7105, at the corner of this rounded earth.
flashing from rooted lj3 rom with perseus alpha 25 kernel and cwm.
Same issue with cvtem :
"Good news, just booted into your ROM successfully.
Bad news, status 7 on modem and kernel stage of your install script.
Update: broke gapps. Lost root. "
Could not enter CWM , model is not updated , however perseus kernel is updated to stock kernel after flashing this rom
souless88 said:
flashing from rooted lj3 rom with perseus alpha 25 kernel and cwm.
Same issue with cvtem :
"Good news, just booted into your ROM successfully.
Bad news, status 7 on modem and kernel stage of your install script.
Update: broke gapps. Lost root. "
Could not enter CWM , model is not updated , however perseus kernel is updated to stock kernel after flashing this rom
Click to expand...
Click to collapse
I'm working on that..
Thanks for your feedback
Thanks for this rom, will await an update before testing
Sent from my GT-N7105 using xda app-developers app
stil status 7 on modem and kernel
assert failed: write_raw_image ("/tmp/boot.img","/dev/block/mmcblk0p8"
Hey LegendK95
I haven't looked at your script but try this for you kernel and modem flash. I attached flash_image to this post.
assert(package_extract_file("boot.img", "/tmp/boot.img"),
write_raw_image("/tmp/boot.img", "/dev/block/mmcblk0p8"),
delete("/tmp/boot.img"));
package_extract_file("flash_image", "/tmp/flash_image");
set_perm(0, 0, 0777, "/tmp/flash_image");
ui_print("Installing modem...");
assert(package_extract_file("modem.bin", "/tmp/modem.bin"),
run_program("/tmp/flash_image", "/dev/block/mmcblk0p10", "/tmp/modem.bin"),
delete("/tmp/modem.bin"));
delete("/tmp/flash_image");
cmenard said:
Hey LegendK95
I haven't looked at your script but try this for you kernel and modem flash. I attached flash_image to this post.
assert(package_extract_file("boot.img", "/tmp/boot.img"),
write_raw_image("/tmp/boot.img", "/dev/block/mmcblk0p8"),
delete("/tmp/boot.img"));
package_extract_file("flash_image", "/tmp/flash_image");
set_perm(0, 0, 0777, "/tmp/flash_image");
ui_print("Installing modem...");
assert(package_extract_file("modem.bin", "/tmp/modem.bin"),
run_program("/tmp/flash_image", "/dev/block/mmcblk0p10", "/tmp/modem.bin"),
delete("/tmp/modem.bin"));
delete("/tmp/flash_image");
Click to expand...
Click to collapse
Thanks but that's not the problem.
I'm not having enough time to check this out, but I will very soon.
Shall await patiently for your great work to be release again with much stabilisation in the rom.
Second that, waiting for your update Legend.
Related
[ROM][STOCK][4.1.2][N7105] XXDLL7 || Deodexed & Odexed, Rooted, Busybox [01/09/13]
ONLY FLASH THIS IF YOU HAVE N7105.
This is a 4.1.2 Stock Rom made from Factory Image, N7105XXDLL7 (CSC N7105OLBDLL2), released 01/09/13.
Both Deodexed and Odexed versions are available. Both of them are rooted with unsecured boot (N7105) with init.d support and includes busybox.
Wipe cache/dalvik. Flash via CWM or TWRP. Your data will be preserved.
Deodexed: Link 1
Odexed: Link 1
Please credit if you plan to use this as a base.
Thanks
::RESERVED::
Top Job keep up the good work
The same question as in the DLL4 thread: Is there some kind of branding in this rom?
hashcheck said:
Top Job keep up the good work
Click to expand...
Click to collapse
Thanks!
EnhancerFIN said:
The same question as in the DLL4 thread: Is there some kind of branding in this rom?
Click to expand...
Click to collapse
No.
Exploit Fixed?
NightHawkUndead said:
Exploit Fixed?
Click to expand...
Click to collapse
Haven't touched the boot. This is Stock.
if the changeset is the same as DLL4 then this is just the exploit fix like the n7100
Hi
When I try to flash from internal SD, using CWM it starts de process but only for a few seconds, and then reboots...I still get the previous stock (Odexed) DLL4
No error message whatsoever...
pasil.pt said:
Hi
When I try to flash from internal SD, using CWM it starts de process but only for a few seconds, and then reboots...I still get the previous stock (Odexed) DLL4
No error message whatsoever...
Click to expand...
Click to collapse
Did you check if your download wasn't corrupted? Try opening the zip file with 7-zip.
teshxx said:
Did you check if your download wasn't corrupted? Try opening the zip file with 7-zip.
Click to expand...
Click to collapse
Yes, it opens either with 7-zip or win rar
Previous ROM has xposed enabled. Shoul I uninstal it first?
PROBLEM SOLVED. IT WAS MY FAULT
I was using philz_touch_3.99-n7105 (which has nicer interface) but I replaced it by CWM 6.0.1.2.5 and it flashes ok.
Many thanks for the ROM and suport and sorry for the trouble
pasil.pt said:
Yes, it opens either with 7-zip or win rar
Previous ROM has xposed enabled. Shoul I uninstal it first?
PROBLEM SOLVED. IT WAS MY FAULT
I was using philz_touch_3.99-n7105 (which has nicer interface) but I replaced it by CWM 6.0.1.2.5 and it flashes ok.
Many thanks for the ROM and suport and sorry for the trouble
Click to expand...
Click to collapse
haha. NP. I am glad it's working.
Dazog said:
if the changeset is the same as DLL4 then this is just the exploit fix like the n7100
Click to expand...
Click to collapse
Thanks. That's what I was wondering.
NightHawkUndead said:
Thanks. That's what I was wondering.
Click to expand...
Click to collapse
I'll stick with DLL4 for now as I'm running the perseus kernel which already has the exploit fixed. Thanks for the upload thougt teshxx :good:
can anyone tell me why the links always bring me to goo.im and just loops there?
can anyone help to upload the odexed version on an alternative link please?
i've also tried using goomanager on my note2 to download it but it always pops up 'invalid MD5 sum'
teshxx,
May i know this rom including modem, stock rom release by Sammobile including new modem or not?
saints5354 said:
teshxx,
May i know this rom including modem, stock rom release by Sammobile including new modem or not?
Click to expand...
Click to collapse
This doesn't include modem. It's the same one as DLL4.
Sent from my GT-N7105 using Tapatalk 2
Hi
I flashed the xxdll4 with no problems and would like to update to this one. I now know there is no modem which is good but I am confused by the CSC.
It looks different in this ROM would this be a problem or nothing to worry about
Thanks
Sent from my GT-N7105 using Tapatalk 2
machmandp said:
Hi
I flashed the xxdll4 with no problems and would like to update to this one. I now know there is no modem which is good but I am confused by the CSC.
It looks different in this ROM would this be a problem or nothing to worry about
Thanks
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
Nope. Should be fine.
Thanks for the reply
Flashed it no problems
Sent from my GT-N7105 using Tapatalk 2
I decided to start a new thread to keep the CM thread a bit more cleaner and also to allow those who did the N4 conversion to be able to apply the the fixes found on the CM thread. The V1 zip file is universal, so you can flash on top of any ROM made for the N4(AOSP, CM, AOKP, etc). V2 will only work on stock 4.2.1 roms(stock framework-res.apk)
What fixes included?
LTE & GPS(JB AT&T modem)(4.2.2)
Volume keys
APNs(AT&T)
SD card fix (stock 4.2.1 & 4.2.2 based roms only for now)
NFC(Might or might not work)
WARNING
This program/created n4fixanyrom.zip comes with NO WARRANTY (express or implied), and NO GUARANTEE OF FITNESS for any particular task. I have made every effort I can to make this a safe process for users however the author disclaims any liability for damage to your phone or other materials or devices used during this process. The entire risk of flashing the created n4fixanyrom.zip lies with you, the user. By downloading and/or flashing the n4fixanyrom.zip, you acknowledge and accept that the author is not liable for any loss, material or otherwise howsoever caused.
Click to expand...
Click to collapse
Download:
Version 1[Universal]
Link
Version 2 SD\NFC Fix[Capacitive keys fix coming soon]Thanks to dvhexer.
Flash only on N4 stock base ROMs. Do not flash over CM, AOKP or any roms with modified framework. You have been warned.
Link
Version 2 PA Fix[Paranoid Android Fix 4.2.1]:
PA Fix
Version 3(Includes GPS Fix) [4.2.2 Stock based roms only]
4.2.2 Fix
New PA fix by BoostedSR20, please thank him:
Link to post
Instructions:
1- Boot into recovery
2-Factory reset(Or just flash right after flashing any rom since you did a wipe anyway)[If you dont do a factory reset the LTE settings will not stick]
3-flash .zip and fix permissions
4-Reboot system
5-Reboot back into recovery and fix permissions
Credits:
SnowLeopardJB for the original zip.
dvhexer ext SD and NFC.
sk8erwitskil .
The CM team for the APNs.
Houstonn for N4 modems used in previous/future testing.
If you need a fix for a rom that is not supported you can make your own fix in less than 1 minute! Just follow this instructions:
Download and install 7z
Grab the framework-res.apk from the rom you want to run and right click it and go to the 7z menu and select open archive.
A new window will open, browse to res/xml/ and copy this file(right click and save as) in there.
It will ask to to overwrite, click yes.
Replace the framework-res.apk in my zip file with the one you just edited.
Flash it.
Re: [FIX]N4 conversion flashable fix.
Awesome might have to convert over again. The GPS issue is what killed it for me.
Sent from my LG-E970 using Tapatalk 2
So I have to factory reset every time i flash a nightly?
obtained said:
So I have to factory reset every time i flash a nightly?
Click to expand...
Click to collapse
depends if the build.prop gets over written when you flash a nightly.
how is this any different than the zip i made here?: http://forum.xda-developers.com/showpost.php?p=36818642&postcount=32
Re: [FIX]N4 conversion flashable fix.
sk8erwitskil said:
how is this any different than the zip i made here?: http://forum.xda-developers.com/showpost.php?p=36818642&postcount=32
Click to expand...
Click to collapse
Check your thread sk8...
Sent from my LG-E970 using Tapatalk 2
I have a request, can this be made for only volume keys.
Thanks
Re: [FIX]N4 conversion flashable fix.
sk8erwitskil said:
how is this any different than the zip i made here?: http://forum.xda-developers.com/showpost.php?p=36818642&postcount=32
Click to expand...
Click to collapse
GPS lock
Sent from my Nexus 4 using xda app-developers app
sk8erwitskil said:
how is this any different than the zip i made here?: http://forum.xda-developers.com/showpost.php?p=36818642&postcount=32
Click to expand...
Click to collapse
It's the one that I added the APNs and updated the binaries to. I put it here because it got lost on your thread and some people didn't even know it existed...
By the way I was able to open the modem.img file and inside there is another .img file that seems to be the root of the GPS problem.. the thing is I cant get that open for some reason... maybe is encrypted somehow, I dont know it is my first time messing with modems..
Re: [FIX]N4 conversion flashable fix.
Any way to get the nfc and ext sd stuff baked in?
Sent from my Nexus 4 using xda app-developers app
Is anyone working on the on screen buttons? I really hate those lol
Re: [FIX]N4 conversion flashable fix.
Main Target said:
Any way to get the nfc and ext sd stuff baked in?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
That would be awesome
Sent from my Nexus 4 using xda premium
Main Target said:
Any way to get the nfc and ext sd stuff baked in?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Working on it. there will most likely have to be multiple fixes since framework can be rom specific.
Gotroot said:
Is anyone working on the on screen buttons? I really hate those lol
Click to expand...
Click to collapse
Just flash Paranoid Android and get rid of the nav bar in Hybrid Settings.
jhotmann said:
Just flash Paranoid Android and get rid of the nav bar in Hybrid Settings.
Click to expand...
Click to collapse
But does the hard keys at the bottom work now? cause when i was on the convertion they didnt even light up
So i did the convertion and unlocked ,root and then installed v2 and now im in a boot loop? any thoughts? Can i go to recovery and flash PA som then install v2 cause i really need sdto work?
Gotroot said:
So i did the convertion and unlocked ,root and then installed v2 and now im in a boot loop? any thoughts? Can i go to recovery and flash PA som then install v2 cause i really need sdto work?
Click to expand...
Click to collapse
4.2.1 or 4.2?
It was the October file ... I just flashed PA so I was thinking bout tring the V2 zip over this and see what happens
---------- Post added at 12:28 AM ---------- Previous post was at 12:06 AM ----------
ok flashed it over PA lol BOOTLOOP lmfao so i will try to find a factory rom the flash that and then flash v2 on that see what happens
Gotroot said:
It was the October file ... I just flashed PA so I was thinking bout tring the V2 zip over this and see what happens
---------- Post added at 12:28 AM ---------- Previous post was at 12:06 AM ----------
ok flashed it over PA lol BOOTLOOP lmfao so i will try to find a factory rom the flash that and then flash v2 on that see what happens
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2010887 stock 4.2.1.
xxgmon3yxx said:
http://forum.xda-developers.com/showthread.php?t=2010887 stock 4.2.1.
Click to expand...
Click to collapse
Thanks I will try this
---------- Post added at 01:02 AM ---------- Previous post was at 12:46 AM ----------
xxgmon3yxx said:
http://forum.xda-developers.com/showthread.php?t=2010887 stock 4.2.1.
Click to expand...
Click to collapse
Ok that worked thanks alot!!! Now going to try to install PA over what I have now without wiping see what happens
---------- Post added at 01:05 AM ---------- Previous post was at 01:02 AM ----------
Ya installed Pa over the working sd on stock so now I guess I am going to have to flash stock again and do the sd fix and leave it as is until further dev is done on the fix.. Thanks for all the help
This is a Deodexed Version Of the newest JellyBean 4.1.2 N5110UEDMD1
Kinda Bored and Noticed you guys have nothing to flash so figured id help out a bit
I currently dont have the tablet but plan on getting one soon, please let me know how it goes it should be perfect
Features:
Rooted
insecure boot.img
BusyBox
Zipaligned
Deodexed
Init.d support
adb as root
Bash
Nano
Download: http://www.androidfilehost.com/?fid=22926241640220009
md5: b5a83f9c4aecc2fee0f2bdf4784a7223
Disclaimer: nothing has been edited this is a full stock rom that you would expect to get from samsung just rooted and deodexed for easy modability,themability
Thanks to:
SamMobile - for the basefirmware package
Dsixda - for the kitchen used to deodex
ChainFire - for superSU
Reserved
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
rfb813 said:
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
Click to expand...
Click to collapse
great news i was hoping it would be good the only thing i was worried about was the update binary file but sense we have the same partitions as the note 10.1 i used a known working one and apparently all is good GREAT NEWS!! and ps thanks a bunch
This is what I am talking about flashing now
Edit: Works perfect thanks cant wait for you to get this device Mr Beanstown106
Can international version (N5100) flash this? Will I lost the 3g ability or it does not matter?
Thanks
rfb813 said:
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
Click to expand...
Click to collapse
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
shaoran_ojo said:
Can international version (N5100) flash this? Will I lost the 3g ability or it does not matter?
Thanks
Click to expand...
Click to collapse
WILL LOOSE 3g i will make a n 5100 version roday
itd be easier if u dump partitioni ask itin general
Sorry for asking here, can someone upload:
framework/framework-res.apk
usr (folder)
vendor (folder)
build.prop
bin/sdcard; rild
etc/vold.fstab
desantim said:
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
I Flashed CWM 5110 Ex#4 with Odin on my Note with auto reboot off. Rebooted into Recovery to check that I had CWM, I did and then rebooted. CWM asked if I wanted to make this my permanent recovery. I said yes. Note then rebooted. I installed Goo Manager so I could easily reboot into Recovery. Did a nandroid backup of my Note's Rom for safety, downloaded the zip file and saved it to my external sdcard (you could use your internal memory) and flashed it. Worked perfectly. I did have to reformat my 64gb sdcard to Fat32 for CWM to recognize it.
desantim said:
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
Flashed with emwno CWM #4 port http://forum.xda-developers.com/showthread.php?t=2244252
Made a backup first wipe and flash there is no progress bar at least it doesn't work properly n CWM so you just have to wait.
emwno said:
Sorry for asking here, can someone upload:
framework/framework-res.apk
usr (folder)
vendor (folder)
build.prop
bin/sdcard; rild
etc/vold.fstab
Click to expand...
Click to collapse
Emwro, here are the files from the Deodexed Rom you asked for:
https://www.dropbox.com/sh/bnxyel2l6t9lm56/X-0cOX2ZFA
beanstown106 said:
WILL LOOSE 3g i will make a n 5100 version roday
itd be easier if u dump partitioni ask itin general
Click to expand...
Click to collapse
Done, hope that help and thanks for your work
shaoran_ojo said:
Done, hope that help and thanks for your work
Click to expand...
Click to collapse
thanks will do the 5100 version when i get home from dinner
Do I need to wipe everything or just cache ?
Nanaki666 said:
Do I need to wipe everything or just cache ?
Click to expand...
Click to collapse
I just wiped cache and dalvik cache and installed.
worked fine
beanstown106 said:
thanks will do the 5100 version when i get home from dinner
Click to expand...
Click to collapse
Yeah N5100 version is much more interesting, because 8 " is portable with 330 g
rfb813 said:
I just wiped cache and dalvik cache and installed.
worked fine
Click to expand...
Click to collapse
did the same just now, working well!
Just as an aside, if you do flash this, some of the prepackaged samsung apps will detect root and will exit upon trying to run them. I dont use those apps anyway, but if you do its just a forewarning
beanstown106 said:
great news i was hoping it would be good the only thing i was worried about was the update binary file but sense we have the same partitions as the note 10.1 i used a known working one and apparently all is good GREAT NEWS!! and ps thanks a bunch
Click to expand...
Click to collapse
One of the best Roms for the S3 was developed by enewman. He started out with the base Rom like you provided and then did a cookbook approach where he provided zippable Mods for things like 4 way reboot, battery icons, etc. This allow you to flash and modify the rom to your choosing. He later developed his own Rom, the Devils Reject. But the initial effort was successful in giving us the ability to modify our Rom. Any chance we can get something like this started until you have the opportunity to develop you own Rom?
Anyone noticed samsung is going backwards with this firmware with regards to auto brightness slider?
JKAY DELUXE [I9300 JB 4.1.2]
Q&A for Rom MIUI V5 V11.18 4.4.4
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Rom MIUI V5 V11.18 4.4.4. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
mila4me said:
and if u like u can also flash miui-Hide Navigation Bar
Click to expand...
Click to collapse
How can I make transparent Navigation Bar?
/7ABEJI said:
How can I make transparent Navigation Bar?
Click to expand...
Click to collapse
go to themes app and looks online for free themes maybe u will find something idk
or try mi-tools apk but i'm not sure if its can do that
also check here maybe there http://xiaomi.eu/community/threads/mod-extended-settings-menu-options.7738/
mila4me said:
or try mi-tools apk but i'm not sure if its can do that
Click to expand...
Click to collapse
I'm try mi-tools apk (Nexus navbar options), but it's not work.
My phone has brick
i'm on .167 but when i flash miui rom my phone turn off and can't turn on. i flashed stock!
Crown.Krystal said:
i'm on .167 but when i flash miui rom my phone turn off and can't turn on. i flashed stock!
Click to expand...
Click to collapse
Looks like you haven't wiped data.
no i had wiped done then i flashed rom
no i had wiped done then i flashed rom
Crown.Krystal said:
no i had wiped done then i flashed rom
Click to expand...
Click to collapse
Then you either have a wrong kernel or your rom didn't install correctly.
Crown.Krystal said:
i'm on .167 but when i flash miui rom my phone turn off and can't turn on. i flashed stock!
Click to expand...
Click to collapse
idk man go back to stock /root/dualboot recovery then from PhilzRec. Clean to install new rom then flash stock rooted 167 boot it up turn of then again Clean to install new rom from Philz /flash rom chose your model unlocked or locked /flash gaps then restart your phone 1st boot can take a while or if your battery low it can not boot it up too. If you need rooted with dualboot recovery stock 167 4.4.4 i can upload it
good luck
here is a 167. (US - Unbranded) 4.4.4 root and dual recovery if you need it https://mega.co.nz/#!f9AyiayQ!vfHne7yyTiZl3Sql0pOPoERDJYSQXIXJEtjRllZzB6U
can you have me a kernel for miui
pec0ra said:
Then you either have a wrong kernel or your rom didn't install correctly.
Click to expand...
Click to collapse
can you give me a kernel for miui
Crown.Krystal said:
can you give me a kernel for miui
Click to expand...
Click to collapse
If you have an unlocked bootloader, the one in the zip should work fine. Otherwise you need to flash the kernel from a .167 ftf (with flashtool; select only the kennel.sin and don't check wipe data)
hey guys im interested in flashing this rom can someone give me a step by step of how to flash and what to flash, i currently have an unlocked bootloader, running eXistenZ Ultimate 4.5.0, with nut dual recovery in case anyone wanted to know, also how is the battery life and camera quality?
port miui to xperia z3
Can we port miui buy using Z2 to Z3 Rom Patcher from z3 threat...
MIUI6 - 4.4.4 for Locked and Unlocked Bootloader
Hi , i can't post in the good topic and i can't post the link too (i have less than 10 posts ...) but there's a MIUIV6 4.4.4 based released for the Z2
Try to copy miui.com/thread-2529681-1-1(.html) without the "( )"
Hope there will be a complete guide soon , thanks
miui v6
No just install boot.img in miui v6 folder join revocery and flash rom
---------- Post added at 01:06 AM ---------- Previous post was at 12:52 AM ----------
Anyone has tryed miui v6 xposed with another kernel i have lb and not working xposed
Does Anybody Have An Idea How To Get Away With Navbar On Lockscreen.?
Sent from my D6502 using XDA Free mobile app
MIUI V6
i can't do the OTA update from 5.5.1 to 5.5.8 and all the zips that i found and download on my computer are corrupted ...
It's me or general ?
Sorry for my english :angel:
I personnaly use GMD auto hide softkeys , it's a paid app but it works fine , just allow pop-up and make it unkillable .
Sent from my D6503 using XDA Free mobile app
xjerem34x said:
i can't do the OTA update from 5.5.1 to 5.5.8 and all the zips that i found and download on my computer are corrupted ...
It's me or general ?
Sorry for my english :angel:
Click to expand...
Click to collapse
I had a problem installing the ota too. Once it failed, I just went to recovery and flashed manually the zip in the "downloaded_rom" folder.
miui 6
pec0ra said:
I had a problem installing the ota too. Once it failed, I just went to recovery and flashed manually the zip in the "downloaded_rom" folder.
Click to expand...
Click to collapse
That's my error :
assert failed : apply_patch_check ("/system/app/QuickSearchBox.apk" , ... )
E: Error executing updater binary in zip '/external_sd/miui_ota_Z2_liupan_5.5.1_5.5.8_b93b291540_4.4.zip
Error flashing zip '/external ...blabla
I tried with the zip in the external sd and in the "downloaded rom" folder , same error
After a lot of failure, i found the working version of UX contacts (dialer) for our phone Stock MM. So i decided to make a flashable zip. If there is already a flashable made by someone here, i am sorry for posting again, but i didn't have time to check.
Make no mistake, it has no bugs! And the app itself is much faster and much more attractive.To make things clear, i will not be held responsible for anything that happens to your phone!
Thanks to @Albe95 for App.Instructions
Boot into TWRP
Flash the zip.
Done!
Ragazzza said:
After a lot of failure, i found the working version of UX contacts (dialer) for our phone Stock MM. So i decided to make a flashable zip. If there is already a flashable made by someone here, i am sorry for posting again, but i didn't have time to check.
Make no mistake, it has no bugs! And the app itself is much faster and much more attractive.To make things clear, i will not be held responsible for anything that happens to your phone!
Thanks to @Albe95 for App.Instructions
Boot into TWRP
Flash the zip.
Done!
Click to expand...
Click to collapse
hey buddy.. thanks for your work.. any screenshots if u dont mind..
pheonixxdark said:
hey buddy.. thanks for your work.. any screenshots if u dont mind..
Click to expand...
Click to collapse
Ah sorry bud, here it is
Ragazzza said:
Ah sorry bud, here it is
Click to expand...
Click to collapse
oh... looks good.. ill flash it tonight... thanks again,, it should work fine with stock S5 G900F running on Boeffla kernel i hope.....
@Ragazzza bro i flashed but no change in the dialer.. What could be the issue?
Does it work on SM-G900H Stock MM?
Thanks in advance ^_^
Ragazzza said:
After a lot of failure, i found the working version of UX contacts (dialer) for our phone Stock MM. So i decided to make a flashable zip. If there is already a flashable made by someone here, i am sorry for posting again, but i didn't have time to check.
Make no mistake, it has no bugs! And the app itself is much faster and much more attractive.To make things clear, i will not be held responsible for anything that happens to your phone!
Thanks to @Albe95 for App.Instructions
Boot into TWRP
Flash the zip.
Done!
Click to expand...
Click to collapse
Have you tried any InCallUI that is UXed?
sk1887 said:
Have you tried any InCallUI that is UXed?
Click to expand...
Click to collapse
Yup, and it is working amazing on my stock mm
Ragazzza said:
Yup, and it is working amazing on my stock mm
Click to expand...
Click to collapse
Can you share that as well please? Thanks
I flashed this on my rooted marshmallow d5... it didnt change anythung... sorry I mean i had lollipop, lroably why it didnt work
Flashed it in TWRP, rebooted, nothing changed..
I'm on SuperLite Rom, that's stock rom without crap apps.
Isaac_T said:
Flashed it in TWRP, rebooted, nothing changed..
I'm on SuperLite Rom, that's stock rom without crap apps.
Click to expand...
Click to collapse
You need to do it manually.
1. Start a root explorer (any file manager with root access; my personal fav is Solid Explorer);
2. Extract Grace_UX_Phone_app__fully_working.zip;
3. Copy [Grace_UX_Phone_app__fully_working]/system/priv-app/SecContacts_M.apk to the /system/priv-app/SecContacts_M/ folder;
4. Change the attributes of the /system/priv-app/SecContacts_M/SecContacts_M.apk file to 644 (rw-r--r--);
5. Clear data of the Contacts app (e.g. go to Settings>Applications>Application Manager, choose Contacts>Storage>Clear data).
That should do it. Good luck!
Doesn't work on Stock Rom SM-G900F 6.0.1!
Sent from my Galaxy S5 using XDA Labs
Doesn't work on the g901f stock MM.
---------- Post added at 11:15 AM ---------- Previous post was at 11:14 AM ----------
The zip is not set up properly. It flashes a file directly into the priv-app folder. It needs to be into its own folder.
Is it compatible with G-900F lineage os 14.1?
I doesn't work on SuperLite rom, the default contact/dialer app is located in "/system/priv-app/SecContacts_M_OSup_Legacy/SecContacts_M_OSup_Legacy.apk" and when I replace it, Phone and Contacts completely disappear from the phone! I had a backup so I could restaure it, but indeed it still doesn't work unfortunately... Do you think there's a way?