i wiped everything including a factory reset then installed liquid rc8 i used correct one for my phone it rebooted but never booted up to the samsung logo doesnt seem to vibrate or anything when i press power wtf?
now when i plug it into pc it shows my external drive then it vanishes then re-appaears and tells me to format it but that doesnt work either
Put in download mode and Odin back to stock.
How full was your battery when you started? May have drained it
Sent from my SAMSUNG-SGH-I717 using xda premium
leo5111 said:
i wiped everything including a factory reset then installed liquid rc8 i used correct one for my phone it rebooted but never booted up to the samsung logo doesnt seem to vibrate or anything when i press power wtf?
Click to expand...
Click to collapse
If you can get back into recovery mode, try reflashing the rom or flashing another rom. I've had cases where a rom just wouldn't work for me (I too, have the AT&T Note). Never had the patience to try to figure out why. I usually try to flash several times (making sure I do a factory wipe) but if it still didn't work, I would just flash another rom.
If you can't get into recovery mode, then you may need to flash a stock rom via ODIN (in download mode) and then start all over from scratch (root the phone, install CMW or TWRP,flash custom rom, etc.). Please search the forums for a stock rom and all the files / instructions on flashing via ODIN if you aren't already familiar with it.
Since your PC recognizes the phone to some degree (it at least recognizes that the phone was connected and interacts with the sd card), it sounds like you have a soft brick which is fixable via one of the methods above. If your phone was hard bricked, then the PC more than likely wouldn't recognize it at all, it would do absolutely nothing and you would basically have a paper weight. It doesn't sound like you have a hard brick.
If anyone else has more insight, please chime in. I'm definitely no expert here.
it wont even light up to samsung logo or even vibrate also the sd is recognised but it randomly connects and disconnects odin does not see phone
leo5111 said:
it wont even light up to samsung logo or even vibrate also the sd is recognised but it randomly connects and disconnects odin does not see phone
Click to expand...
Click to collapse
Perhaps your cable is defective. All of my cables eventually get to the point where I have to twist them and hold them a certain way to work. When that happens I know it's time to replace the cable. You may just need to use another cable.
no i tried with 2 differnt cables also battery was at like 99% when this happened also windows keeps finding my sd for a moment and then vanishes could this be stuck power button? if so i dont see how i didnt touch power button when it rebooted
show tnsraet
leo5111 said:
no i tried with 2 differnt cables also battery was at like 99% when this happened also windows keeps finding my sd for a moment and then vanishes could this be stuck power button? if so i dont see how i didnt touch power button when it rebooted
Click to expand...
Click to collapse
having the exact same issue, did you get this resolved?
Dark_lupus said:
having the exact same issue, did you get this resolved?
Click to expand...
Click to collapse
in star trek speak, she,s dead jim :crying:
leo5111 said:
in star trek speak, she,s dead jim :crying:
Click to expand...
Click to collapse
I'm sorry man hopefully I can fix mine I've been told I performed my whole process of flashing roms right but I don't understand why my phones dont work one new and the other a couple months old...
I put up a thread but not much help from anybody.
Hummmm this just don't sound right.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Related
I have never bricked it before, and I cannot go into download mode... I tried the the Vol up and vol down, didn't work, so I have been using ADB and just ****ed something up....
Now I need to know a way how I can revert back to stock, please and thank you, I will forever owe you one.
EDIT: Okay there is some confusion, to simplify it I will take it step by step:
I replaced an APK file from my system/apps and ever since it has been force closing process.android.acore, so I tried reflashing to stock, it froze while doing so now I have a picture of a caution sign, a phone and a computer coming up on my Vibrant, it will not start up.
It is hardware locked because I have never been able to access download mode via hardware keys(I have always been using ADB).
Is there any way I can reinstall stock? Or is my vibrant now destroyed?
what exactly were you doing when your phone stopped working? "just ****ed something up" makes it hard to pinpoint problems...
I don't know I replaced my phone.apk with another one then ever since then it keeps saying process.android.acore has stopped working. It wouldn't stop showing up so I tried to reflash with Odin to stock but it froze and now it is bricked.
bumping a little bit, I have never bricked it before so I have 0 experience.
What do you mean by froze? On what screen? How far can you get into booting?
bigragu said:
What do you mean by froze? On what screen? How far can you get into booting?
Click to expand...
Click to collapse
Alright let me start over with more detail:
I tried to replace the dialer so I replaced the phone.apk and then process.android.acore kept force closing so then I tried reflashing with stock, during that I don't know what happened but I think my phone froze, so then it shut off and turned back on, I only found a screen with a computer on it... I am assuming it is bricked.... I also know it is hardware locked because I tried going into debug mode with vol up and vol down, how can I unbrick it?
Try moving the stock rom into the phones internal memory via adb. And flash it after a wipe.
I am Also having this same problem
I Flashed my Vibrant through Rom Manager to Froyo 2.2 from eugene373 and sombionix.
After flashing to both ROMS for Froyo I wanted to revert back to 2.1.
I tried to put sombionix 1.3 eclair ROM back on to my phone using clockwork mod.
The flash was not successful it stopped in the middle but the phone came on with a Force close error of an android process.
I tried to reboot through adb reboot recovery with usb debugging enabled.
The phone shut down like it would reboot into recovery mode and now it gets stuck on boot at the samsung vibrant screen.
I tried to use ODIN to flash back to the stock Rom but the phone is recognized in ODIN but will not flash.
ODIN sees the phone but will not get past flash analysis. (Sat for 8 Hours)
I believe this is the definition of bricked. Please Help!!!!!
sheek360 said:
Try moving the stock rom into the phones internal memory via adb. And flash it after a wipe.
Click to expand...
Click to collapse
It isn't even being read by my computer... nothing...
sympala said:
I Flashed my Vibrant through Rom Manager to Froyo 2.2 from eugene373 and sombionix.
After flashing to both ROMS for Froyo I wanted to revert back to 2.1.
I tried to put sombionix 1.3 eclair ROM back on to my phone using clockwork mod.
The flash was not successful it stopped in the middle but the phone came on with a Force close error of an android process.
I tried to reboot through adb reboot recovery with usb debugging enabled.
The phone shut down like it would reboot into recovery mode and now it gets stuck on boot at the samsung vibrant screen.
I tried to use ODIN to flash back to the stock Rom but the phone is recognized in ODIN but will not flash.
ODIN sees the phone but will not get past flash analysis. (Sat for 8 Hours)
I believe this is the definition of bricked. Please Help!!!!!
Click to expand...
Click to collapse
Excuse me sir, make your own thread, don't jack mine...
Smokexz said:
It isn't even being read by my computer... nothing...
Excuse me sir, make your own thread, don't jack mine...
Click to expand...
Click to collapse
lol Sorry Smokexz didn't mean to jack your thread just trying to consolidate phone bricked threads. I will create my own NO PROBLEM.
sympala said:
lol Sorry Smokexz didn't mean to jack your thread just trying to consolidate phone bricked threads. I will create my own NO PROBLEM.
Click to expand...
Click to collapse
Thanks, regardless both our situations are bad .
Please? I really need help with this.
Smokexz said:
Please? I really need help with this.
Click to expand...
Click to collapse
If there is an answer, which I am not sure that there is, it would be here: http://forum.xda-developers.com/showthread.php?t=782739. You may have already seen it, but if not it gives many different processes to try. Good luck!
hourst2 said:
If there is an answer, which I am not sure that there is, it would be here: http://forum.xda-developers.com/showthread.php?t=782739. You may have already seen it, but if not it gives many different processes to try. Good luck!
Click to expand...
Click to collapse
Yep, I'm screwed thanks for the help though.
Can you get the phone in download mode?
Did you try this:
Pull battery
hold the volume up and down
reinsert the battery whiles still holding down the volume up n down
plug in usb cord
it should put you back in to DL mode
Open ODIN and unplug phone from PC and plug back in hopefully it will notice it then.
I am not sure if you can get in DL mode and it just wont let you do anything, but if you have already tried this my apologies.
gthmcty1 said:
Can you get the phone in download mode?
Did you try this:
Pull battery
hold the volume up and down
...
Click to expand...
Click to collapse
Did you even read the OP? He is HARDWARE LOCKED ie BUTTONS DON'T WORK geeze people learn how to read!
And on topic, if you can't ADB and you are Hardware Locked, you are SOL. Try to get an exchange from T-Mobile since it appears that they regard being Hardware Locked as a defect.
Alright thanks
Sent from my Motorola_i1 using Tapatalk
gravis86 said:
Did you even read the OP? He is HARDWARE LOCKED ie BUTTONS DON'T WORK geeze people learn how to read!
And on topic, if you can't ADB and you are Hardware Locked, you are SOL. Try to get an exchange from T-Mobile since it appears that they regard being Hardware Locked as a defect.
Click to expand...
Click to collapse
Your a dumb ass, His thing actually does work.. I was "hardware locked" like 5 times That DOES work, you sir are a DUMB ASS < Had to say it again
(Make sure that your USB is plugged into your computer & not your phone)
Remove the back cover & remove the battery along with your sim & micro SD
Hold the VOL Up & VOL Down
(Keep holding those buttons) Now insert the battery
Plug the usb into your phone.
It will put you back in to DL mode
Open ODIN and unplug phone from PC and plug back in hopefully it will notice it then.
^^Do that
gravis86 said:
Did you even read the OP? He is HARDWARE LOCKED ie BUTTONS DON'T WORK geeze people learn how to read!
And on topic, if you can't ADB and you are Hardware Locked, you are SOL. Try to get an exchange from T-Mobile since it appears that they regard being Hardware Locked as a defect.
Click to expand...
Click to collapse
Wow you come in and try to offer up help and you get some one that feels the need to police the "suggestions"........ Have a coke and a smile my friend...and relax!
gthmcty1 said:
Wow you come in and try to offer up help and you get some one that feels the need to police the "suggestions"........ Have a coke and a smile my friend...and relax!
Click to expand...
Click to collapse
Not to mention that what that guy said actually works...
Some people just make me laugh
(Make sure that your USB is plugged into your computer & not your phone)
Remove the back cover & remove the battery along with your sim & micro SD
Hold the VOL Up & VOL Down
(Keep holding those buttons) Now insert the battery
Plug the usb into your phone.
It will put you back in to DL mode
Open ODIN and unplug phone from PC and plug back in hopefully it will notice it then.
^^Do that
I was trying to use odin to get back to a stock rom (UVJFD). Phone was in download, odin was running. Odin suddenly said "not connected" and nothing was listed where com is usually displayed. I unplugged my phone and it immediately displayed a phone, exclamation, computer.
I tried the three button reboot, but it immediately went back to this screen. I've tried all of the options in the 'So you've bricked your phone' stickey, except the soldering method and I can't get it to do ANYTHING.
What do I do? I'm trying to get back to factory. At this point, I may need to send it in.
Just do what you would normally do to get back to download mode. I can't specifically remember the buttons but just jeep trying until it shows up on odin.
Actually I read somewhere that the phone "!" Cpu means that it will already work with odin so I guess try that. Im not certain that it will work immediately. If that doesn't work then do what I said first lol. Don't worry its not bricked this happened to me the day I got my phone hahaha
Sent from my SGH-T959 using XDA App
Phone....!.....PC is just like download mode. I was able to recover from it, when it happened to mine. Maybe the JFD you had was faulty?
But ODIN should recognize your phone.
Completely bricked?
shelbydz wrote: I tried the three button reboot, but it immediately went back to this screen
Click to expand...
Click to collapse
Does that imply that you saw some sort of life in the screen such as any light on the display? If that is the case it is probably worth trying the 301k Resistor method to get to the download screen.
On the other hand if your phone is exactly in the same shape as my phone is then I really feel for you. My screen never shows any life. It appears like the battery is dead and I've tried everything and I know the battery is fully charged.
So my next step is either finding someone with a jtag interface or send it off for repair.
Anyone have suggestions in that next step? Any weekend warriors with a jtag interface where we can send it? Any suggestions as to where to send it (t-mobile is not an option since I'm not using t-mobile)
It keeps rebooting to the icon screen (phone ! computer). I tried plugging it back in, but odin didn't see it.
I'll have to play around with it a bit more to see if I can get it to work.
thx
shelbydz said:
It keeps rebooting to the icon screen (phone ! computer). I tried plugging it back in, but odin didn't see it.
I'll have to play around with it a bit more to see if I can get it to work.
thx
Click to expand...
Click to collapse
Odin should recognize it, try using a different ODIN. Make sure ODIN is running first, with the proper files already loaded "PDA, MODEM, CSC" then plug in phone.
that seemed to work. (loading the files to odin, then connecting) Apparently I had a bad ROM image. It's booting up now.
Thanks for all of the help.
Please Help me out.
I was using CynogenMod7 ROM. Could not write on my external SD card or mount it .
So decided to go back to Stock froyo firmware.
Tried ODIN to flash to my stock froyo firmware.
Had done it many many many a times earlier with success.
But ODIN could'nt complete the process, it kept on getting struck at Kernel and Factory some times.
Later thought there might be something wrong with bootloader.
Downloaded stock froyo bootloader.
Tried to ODIN the bootloader and got Struck at SBL many times ,Kept on trying then got struck at PARAM.
Removed the battery.
From than on NO Response what so ever combination buttons used.
No battery indicators,No light on Home keys, No signs of any power. Nothing Visible on screen & keys.
Tried usb JIG - no response.
Tried Ultimate UnBrick Resurrector-No response.
No lights .
Please solve my problem.
This may not work because I discovered this by accident. I bricked my phone so bad it looked like it wouldn't even turn on too. So, hopefully this works. Make sure you have your samsung drivers installed. Open Odin and connect the USB to the computer but not to the phone. Do a battery pull and do the three button boot, simultaneously connecting the USB to the phone. Most likely, nothing will happen. Hopefully, the phone will connect to Odin. Then, click start. That's right. Don't put any pit or tar files in, just click start. Hopefully, your phone will reboot to the vibrant screen and is stuck there. If it does, now you can reboot to download mode and Odin whatever files you wanted. If it doesn't work, just keep messing with the three button boot. I apologize for wasted time if it doesn't work. These steps are what I personally did on my phone. Hopefully, it works for you.
Sorry to say but I believe you have hard bricked your phone. If installing bootloaders goes wrong then your phone can turn into a paper weight. You could maybe try a jtag repair but I'm not sure it would help. You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Sent from my SGH-T959 using Tapatalk
dr_rp1234 said:
Please Help me out.
I was using CynogenMod7 ROM. Could not write on my external SD card or mount it .
So decided to go back to Stock froyo firmware.
Tried ODIN to flash to my stock froyo firmware.
Had done it many many many a times earlier with success.
But ODIN could'nt complete the process, it kept on getting struck at Kernel and Factory some times.
Later thought there might be something wrong with bootloader.
Downloaded stock froyo bootloader.
Tried to ODIN the bootloader and got Struck at SBL many times ,Kept on trying then got struck at PARAM.
Removed the battery.
From than on NO Response what so ever combination buttons used.
No battery indicators,No light on Home keys, No signs of any power. Nothing Visible on screen & keys.
Tried usb JIG - no response.
Tried Ultimate UnBrick Resurrector-No response.
No lights .
Please solve my problem.
Click to expand...
Click to collapse
OK first, the stock images are 2.1 eclair not 2.2 froyo. Are you sure you have the right files? Are you sure your phone is a t959(3g, no front camera)and not t959v(4g, has front camera). Second, it sounds like a hard brick, if all else fails go to www.mobiletechvideos.com and check out the unbrickable mod and JTAG repair.
If you get your phone in DL mode and you have the correct Odin images, check the repartition box as well as others and run it.
Good luck
sent from my magic box to yours
Remove battery and sim and microsd. Leave out and press and hold power for 30 seconds or so. Leave battery out for a few minutes.
Put battery in and if you are on GB bootloader hold volume up and plug in USB. Might get you to download mode.
I did that with a friends phone about a year ago and got lucky. Odin recognized it. I read that somewhere here on XDA. May be a shot in the dark... but when you get desperate any new ideas to try can be a relief right?
Good luck to you.
After I messed with bootloaders and then tried to get back to stock with Kies I had this problem.
iTz KeeFy said:
You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Click to expand...
Click to collapse
I called Samsung and told them that I was just trying to upgrade to 2.2 with their software and they replaced my PCB (printed circuit board) for no cost (including shipping). I have no idea if they tried to figure out if I had really used Kies (if they could even figure it out with the state my phone was in) or if they just replaced the PCB blindly. Worth a shot, I'd say!
Thanks for your concern.
Zeferden said:
This may not work because I discovered this by accident. I bricked my phone so bad it looked like it wouldn't even turn on too. So, hopefully this works. Make sure you have your samsung drivers installed. Open Odin and connect the USB to the computer but not to the phone. Do a battery pull and do the three button boot, simultaneously connecting the USB to the phone. Most likely, nothing will happen. Hopefully, the phone will connect to Odin. Then, click start. That's right. Don't put any pit or tar files in, just click start. Hopefully, your phone will reboot to the vibrant screen and is stuck there. If it does, now you can reboot to download mode and Odin whatever files you wanted. If it doesn't work, just keep messing with the three button boot. I apologize for wasted time if it doesn't work. These steps are what I personally did on my phone. Hopefully, it works for you.
Click to expand...
Click to collapse
Thanks for your concern.
But it did not work for me.
thanks
iTz KeeFy said:
Sorry to say but I believe you have hard bricked your phone. If installing bootloaders goes wrong then your phone can turn into a paper weight. You could maybe try a jtag repair but I'm not sure it would help. You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Thanks for your concern
Its T mobile vibrant T959.
Its T-mobile Vibrant T959 without a front camera.
Totally no response.
No lights on soft keys ( Menu,Home,Back,Search)
No response even When connected with wall charger or PC.
Please help.
Thanks
dr_rp1234 said:
Its T-mobile Vibrant T959 without a front camera.
Totally no response.
No lights on soft keys ( Menu,Home,Back,Search)
No response even When connected with wall charger or PC.
Please help.
Thanks
Click to expand...
Click to collapse
Sorry to say this but your phone is hard bricked, as in nothing can save it but a JTAG or warranty service. You can try to call Samsung and say you hard bricked your phone cause of kies, it worked for another.
Sent from Mount Olympus via Hermes.
you can try this, it works for many user
http://forum.xda-developers.com/showthread.php?p=17858853#post17858853
HELP!
I need help with my Samsung galaxy SGH-T959 Vibrant I got bricked so I was fixing it with odin until my phone fell and it disconnected and red letters and numbers came out. when I try turning my phone on it doesn't until I press the buttons to go to download mode those red numbers come out and I can't do anything. Please Help
When you pulled the battery, after it hung up with Odin, you corrupted the primary Bootloader, because it wasn't completely written in......Last weak possible option is to try every rocker/battery/cable sequence ETC, to get Odin to handshake with the phone!!.....If there's still no sign of life after doing that....Your only option will be to have it JTAG,d in order to rewrite the primary bootloader file back in it.....it'll never power on unless the primary bootloader executes properly!!....you can corrupt the 2ndary BL and the phone will only be soft bricked, but a primary BL corruption is phone DEATH!!....Only place I know of that's reliable is: mobiletechvideos.com....send it to them, they'll rewrite the primary BL back in it and I think 2.1 or 2.2 for you and mail the phone back to you!!....Good luck let us know if you got it powered on with any combination, as that could save another Bricker from having to send it out!!
Randomness Guy........Start your own thread in the troubleshooting forum, AND QUIT TRYING TO HIJACK THIS THREAD!!
Like subject says, all i can do is get to download mode with a jig. When i plug it into the pc windows shows a gadget serial device, but heimdall and odin won't work. ADB doesn't show any devices plugged in. What can i do?
You could provide more information if you want someone to help.
What exactly did you do to try to get into recovery mode? And what were the results?
If the jig works, then it is probably a bad port, bad cable, or driver issue.
all i can do is try the 3 button combo which fails. all it does is show the s2 logo and go black. i have a epic 4g touch which loads up fine on the same port, same cable. Do the ATT ones use different drivers?
acme64 said:
all i can do is try the 3 button combo which fails. all it does is show the s2 logo and go black. i have a epic 4g touch which loads up fine on the same port, same cable. Do the ATT ones use different drivers?
Click to expand...
Click to collapse
The driver is apparently OK, but it could still be a variety of things, including the cable, or the microusb port on the phone. Sounds like it might be something different though. But how to trouble shoot the issue without knowing anything about the phone?
We need to know everything you can possibly tell us about the phone. How long have you had it? What was installed on it? What did you do to it just before it failed? What were the symptoms when it failed? And probably a thousand other questions. Tell us everything you can think of.
well its not my phone so i don't know much. It crashed about 3 weeks ago so i don't remember all the details. I know it was running cm7.2 when it suddenly rebooted, the launcher kept FCing repeatedly. the 3 button combo for recovery didn't work, so i put it in download mode and used ADB to flash something, i forgot what it was, but that failed, and now the 3 button combo for download mode doesn't work either. The Jig enables download mode, but the device doesn't seem to show up right in windows.
acme64 said:
well its not my phone so i don't know much. It crashed about 3 weeks ago so i don't remember all the details. I know it was running cm7.2 when it suddenly rebooted, the launcher kept FCing repeatedly. the 3 button combo for recovery didn't work, so i put it in download mode and used ADB to flash something, i forgot what it was, but that failed, and now the 3 button combo for download mode doesn't work either. The Jig enables download mode, but the device doesn't seem to show up right in windows.
Click to expand...
Click to collapse
Well, then I probably can't help you much. Don't know much about problems with CyanogenMod as I've never used it. You don't even remember what you flashed, but whatever it was it probably included a bootloader for a different phone since your button combination stopped working right after flashing. Maybe someone else can give you some help. Unless you can connect to Odin or Heimdall, you can't use the normal route of flashing back to stock.
I'm not even convinced that you have the SGH-I777 model phone, because our phone doesn't use three buttons to get into download mode.
it's the ATT s2, isn't that the sgh-i777? whats the combo to get into recovery and stuff then? on my e4gt its just volume up + power (iirc)
oh you mean one of the questions covered in the FAQ?
http://forum.xda-developers.com/showthread.php?t=1288112
Pirateghost said:
oh you mean one of the questions covered in the FAQ?
http://forum.xda-developers.com/showthread.php?t=1288112
Click to expand...
Click to collapse
Sent from Team Pirate Headquarters. AKA yer moms basement.
acme64 said:
it's the ATT s2, isn't that the sgh-i777? whats the combo to get into recovery and stuff then? on my e4gt its just volume up + power (iirc)
Click to expand...
Click to collapse
This isn't the epic 4G dude
Sent from Team Pirate! Using Tapatalk 2
Phalanx7621 said:
Sent from Team Pirate Headquarters. AKA yer moms basement.
Click to expand...
Click to collapse
Fail meme
Sent from Team Pirate's Transmitter Thingy
It sounds like your drivers are incorrect. Try downloading the Android sdk and downloading the driver from there.
If that doesn't work then I recommend using Heimdall since it uses its own drivers.
Sent from my SGH-I777 using xda premium
acme64 said:
it's the ATT s2, isn't that the sgh-i777? whats the combo to get into recovery and stuff then? on my e4gt its just volume up + power (iirc)
Click to expand...
Click to collapse
Unless you have a skyrocket, which is also an AT&T S2 but has very little in common with the 777.
i have the sdk, and i tried heimdall with its own driver, didn't work. I'll try it in linux and see what happens
Like others have pointed out and asked... MAKE SURE BEFORE YOU DO ANYTHING ELSE that you have the sgh-i777 Galaxy S2 and NOT the sgh-i727 Galaxy S2 Skyrocket.
Open up the battery cover, remove the battery, look at the sticker underneath and look at the MODEL #
This may JUST SAVE YOUR phone before you flash something more that will PERMENTLY RUIN IT...
Sent from My SGH-I777 Running Red Reaper Rom
Nick281051 said:
This isn't the epic 4G dude
Sent from Team Pirate! Using Tapatalk 2
Click to expand...
Click to collapse
I am having the same issue, cant go to download mode..here is my situation
I was on latest shostock 5.2 with Siyah,copied few songs to my external sd card, phone was 95% charged, after few mins the screen went blank
I tried rebooting but nothing happened, went to recovery and tried to clear dalvik cache but it never completed. Tried reflashing the ROM but it got stuck on the dalvik cache clearing, tried to rebbot again and the boot screen started flickering.
Took out the battery for sometime and tried again..now the phone doesnt poer on at all
Have tried to go to download mode by taking battery out, volume up + down and connecting to USB cable on PC..nothing happenss
Tried my USB jig which I used before to remove the triangle, nothing happens.
Please help
vineet381 said:
I am having the same issue, cant go to download mode..here is my situation
I was on latest shostock 5.2 with Siyah,copied few songs to my external sd card, phone was 95% charged, after few mins the screen went blank
I tried rebooting but nothing happened, went to recovery and tried to clear dalvik cache but it never completed. Tried reflashing the ROM but it got stuck on the dalvik cache clearing, tried to rebbot again and the boot screen started flickering.
Took out the battery for sometime and tried again..now the phone doesnt poer on at all
Have tried to go to download mode by taking battery out, volume up + down and connecting to USB cable on PC..nothing happenss
Tried my USB jig which I used before to remove the triangle, nothing happens.
Please help
Click to expand...
Click to collapse
Double posting is not necessary, and is against the rules. Please go back to your original thread.
So my phone started restarting randomly. It will only show the Samsung logo turn off and do the same thing again. Its not rooted and I am pretty sure that its not from something I installed recently (Everything was from the play store and no immediate problems after any of them). When I did the hold volume up,down and power it would only keep on restarting still. But when I just hold volume down it comes to something else that asks if I want to install a new rom. So I was wondering what I should do. Install a new ROM and then revert back ? or will that not work? Also I have a extra I717 with a broken screen I could swap the insides and see if that would help. Also I don't know much about rooting and stuffs. Lemme know what I should do guys! :highfive:
Klmnnoooooo said:
So my phone started restarting randomly. It will only show the Samsung logo turn off and do the same thing again. Its not rooted and I am pretty sure that its not from something I installed recently (Everything was from the play store and no immediate problems after any of them). When I did the hold volume up,down and power it would only keep on restarting still. But when I just hold volume down it comes to something else that asks if I want to install a new rom. So I was wondering what I should do. Install a new ROM and then revert back ? or will that not work? Also I have a extra I717 with a broken screen I could swap the insides and see if that would help. Also I don't know much about rooting and stuffs. Lemme know what I should do guys! :highfive:
Click to expand...
Click to collapse
Could be stuck power button. I know, I know, " but its clicking just fine". That doesnt mean anything. Flick the back of your phone a few times.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Thats not it
Yeah I read that It might be the problem but Its still happening with the case removed.
Klmnnoooooo said:
Yeah I read that It might be the problem but Its still happening with the case removed.
Click to expand...
Click to collapse
Take out the battery. Insert the battery without touching anything else. Does it just power on itself or does it stay off? If it does turn on, you might have a stuck power button. Let us know what happens
did that too :/
I did that too. It would turn off and on again but only show the Samsung logo then restart again. Also I have the case removed so It cant be the power button being stuck and I have tried the battery thing still nothing.
Whatcha mean? It would turn on by itself once the battery is inserted or you would have to press the power button. Once the battery is out and then inserted back in, it is not supposed to be powered on by itstelf. If it does turn on by itself, then the power button is most likely pressed in.
Yayodroid said:
Whatcha mean? It would turn on by itself once the battery is inserted or you would have to press the power button. Once the battery is out and then inserted back in, it is not supposed to be powered on by itstelf. If it does turn on by itself, then the power button is most likely pressed in.
Click to expand...
Click to collapse
I have a I717 doing the same thing. (Eg. device boots and seems to function for a about 2 minutes locks up and reboots. )
As the device was stock when it started having this issue I figured it might be an OS issue Factory reset to it would leave the device booting to optimize applications then reboot. Checked power button checked it was clean.
Also staied on when in recovery without issue.
As I figured this was an OS issue I installed CWM
Downloaded and installed SlimBeam
Device booted and completed instlation and operated for about 2 minutes and rebooted.
Device will does not have any issues with in CWM or Odin. I
I read alsowhere that the internal SD-Card filesystem might have become corrupted and need to be reformated however I have yet to find instruction or confirmantion.
Anyone have some ideas?
.
to Tal Star.
1. When you were in CWM and were about to flash, did you wipe data/factory reset, wipe cache and dalvik cache then do the flash? Or just flash?
2. So either os it would do the same? Stay on for about two minutes, then reboot? Would it reboot back into the os and do the same?
Yayodroid said:
to Tal Star.
1. When you were in CWM and were about to flash, did you wipe data/factory reset, wipe cache and dalvik cache then do the flash? Or just flash?
2. So either os it would do the same? Stay on for about two minutes, then reboot? Would it reboot back into the os and do the same?
Click to expand...
Click to collapse
Full Wipes every time tried a few diffirent roms no diffirnace.Stock, SlimBean & a couple CM ports.
Tal_Star said:
Full Wipes every time tried a few diffirent roms no diffirnace.Stock, SlimBean & a couple CM ports.
Click to expand...
Click to collapse
So right now you can boot up into the os and it will turn off in 2 minutes? or just given enough time? Will it boot into the os each time? I dont think ill have an answer for it, but i bet someone that does will want to know the same things to possibly narrow it down
Yayodroid said:
So right now you can boot up into the os and it will turn off in 2 minutes? or just given enough time? Will it boot into the os each time? I dont think ill have an answer for it, but i bet someone that does will want to know the same things to possibly narrow it down
Click to expand...
Click to collapse
Naw it starts optimzing the Applications and lasts a few minutes reboots locks up and starts again. SlimBean completes the process and makes it all the way to the launcher but after a same amount of time it reboots. back to the launcher. (Slim bean has a resonable number less Apps and that's why it completes or is my best guess)
Tal_Star said:
Naw it starts optimzing the Applications and lasts a few minutes reboots locks up and starts again. SlimBean completes the process and makes it all the way to the launcher but after a same amount of time it reboots. back to the launcher. (Slim bean has a resonable number less Apps and that's why it completes or is my best guess)
Click to expand...
Click to collapse
I really wouldnt know about that. Hopefully someone will come by and help you out. I wonder being on the latest recovery would help if youre not already and then doing it all over? Hopefully someone more experienced will chime in.
Could be a corrupt download.
Again, I always flash rom 2 times. You can get different reactions from 2 seperate flashes. 2 time seems to get a more solid installation.
Wait your 10 and reboot.
Still think its a power button issue. It can act normal but still be the problem. Hows you battery?
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
HAAAAA I hope some one finds this trouble... having the same issue Here... Does your phone starts up correctly when sim card removed? Mine does when sim card removed and pluged into coputer or wall plug.... Did the same steps you did with no effect either... could it be a power management problem ??? :silly: This is getting me nuts...
captemo said:
Could be a corrupt download.
Again, I always flash rom 2 times. You can get different reactions from 2 seperate flashes. 2 time seems to get a more solid installation.
Wait your 10 and reboot.
Still think its a power button issue. It can act normal but still be the problem. Hows you battery?
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Click to expand...
Click to collapse
I dobut it's a download. I use CWM to flash from an external SD card. However I did try reflashing like you suggest with no change. The battery is fine as far as I can tell, like I said it will stay online in recovery on battery for what seems like forever.
daversv09 said:
HAAAAA I hope some one finds this trouble... having the same issue Here... Does your phone starts up correctly when sim card removed? Mine does when sim card removed and pluged into coputer or wall plug.... Did the same steps you did with no effect either... could it be a power management problem ??? :silly: This is getting me nuts...
Click to expand...
Click to collapse
Nope I am working on the one I have with the SIM Card out & SD card out.
happens
So what I done so far is taken out the sim and sd card. Took out the battery put it back in and when I power to turn it on It vibrates (like it normaly would when it starts) then shows Samsung logo turns off and loops. I tried doing the hold volume up down power thing and it does not work. But what does work is when I hold volume down it takes me to a custom OS thing. I don't know what that is but I cant get there. So maybe put a custom OS in and then revert it back?
So I used Odin and put 4.1.2 Jelly Bean Official Firmware but its still doing what it was doing before.Used 3.07 and it said it passed fine. Should I try a different rom or something else? Also the first time it starts up after installing the rom it goes past the logo to the ATT ball animation logo freeze there and turns of then when I turn it on from there it will loop at the samsung logo again.
You can try the firmware upgrade and initialization feature in kies. It will return your device to the original factory firmware, software, and settings. If it still loops after that you have hardware issues.
Ok so I guess im making progress now. After I put the stock rom (Different one from befor) It DIDNT BOOT LOOP well it did but only looped 3 times then stoped. Also there are 2 Samsung logos. the frist one was just normal logo ( same one I was having befor ) then the screen turns off and shows the same logo but this time its a little bigger its white with a blue glow! ( Made it further this time but still crashes afterwards) BUT now I can actualy get into the Manual mode. I did a wipe data/factory reset in that mode which didnt help i wiped the cache too. Still didnt help.
Now in manual mode my computer does recognize that something is connected to it now but it tries to configure it and keeps on failing. And so samsun kies cant connect to it either.
But from where I started at its a improvement
My Note is doing the same thing too now, but I know the reason why. I was trying to install clockworkmodrecovery so I would be able to upgrade to jellybean and I think I flashed a kernel that was meant for rooted phones (pretty dumb of me I guess). So now the phone is stuck and I'm going to try to install the original jellybean 4.1.2 for rogers and hopefully that will fix it.
As long as you can get into Odin download mode, your phone can be fixed.