Increasing NEO /System and /Data partitions - Sony Ericsson Xperia Neo, Pro

Hello Team.
Not everyone knows that the NEO was somewhat offended. For some unknown reason to me NEO section /System and /Data partitions are smaller than on other models Xperia 2011.
It is should be fixed!
We will need:
- FlashTool latest versions (version above 8)
- Installed driver in the system (located in the flashtool\drivers)
- Downloaded NEO V (MT11) .587 FW (Find it in the header. Localization does not matter, I Used nordic) (another .587 FWfor NEO V)
- Installed CWM on the phone, or you can find it in the custom kernel (to make a backup of the installed firmware, and restore it after that)
1. Go to the CWM and do a full backup of your ROM. (you can skip, but will have to re-install the ROM again)
2. Run FlashTool and Flash previously downloaded FW from NEO V 587 with this markers:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. After flashing reboot and go back to CWM. Do factory reset, wipe cache, wipe dalvik cache. And restores the previously made backup.
So what we had:
And what we have now:
As you can see /System increased from 312.5 to 400MB, and /Data from 380 to 420mb.

Need someone to confirm …
Sent from my Xperia Neo using xda app-developers app

vinhpz0 said:
Need someone to confirm …
Sent from my Xperia Neo using xda app-developers app
Click to expand...
Click to collapse
Should work as many have confirmed. But be aware of the drawback before deciding if this mod is the right for you.
Me - not (explained in an another topic)
Sent from my MT15i using xda app-developers app

What's the drawback, I haven't experienced any problems and I've been using it for a few days now.

I just used the one from http://forum.xda-developers.com/showthread.php?t=1766539 but we need to fix the camera if we used stock ROM

MaxWorks said:
Hello Team.
Not everyone knows that the NEO was somewhat offended. For some unknown reason to me NEO section /System and /Data partitions are smaller than on other models Xperia 2011.
It is should be fixed!
We will need:
- FlashTool latest versions (version above 8)
- Installed driver in the system (located in the flashtool\drivers)
- Downloaded NEO V (MT11) .587 FW (Find it in the header. Localization does not matter, I Used nordic)
- Installed CWM on the phone (to make a backup of the installed firmware, and restore it after that)
1. We go to the CWM and do a full backup of your ROM. (you can skip, but will have to re-install the ROM again)
2. Run FlashTool and Flash previously downloaded FW from NEO V 587 with this markers:
3. After flashing reboot and go back to CWM. Do factory reset, wipe cache, wipe dalvik cache. And restores the previously made backup.
So what we had:
And what we have now:
As you can see /System increased from 312.5 to 400MB, and /Data from 380 to 420mb.
Click to expand...
Click to collapse
thanks mate ! it works ! ^^

Every Xperia Neo user should have done this. Great tutorial there. I've been using it for about 5 month now and never experience drawbacks or whatsoever.

where is the downloaded FW from NEO V 587 ?
i can't find it ?
can you give me link for download it
sorry for bad english

I've been using it for 2 months and no problems !

It's good that you didn't notice any drawback. it means this mod worked for you as you wanted.
Here is the reason I don't want that.
After the mod, /system increased from 312.5MB to 400MB (88MB difference) and /data from 380MB to 420MB (40MB increased).
From where the space from? It is from the partition intended for /system/vendor. After modding - /system/vendor mount point disappeared, means its contents is now in /system partition.
As I do not use stock rom, the 133MB partition intended for /system/vendor can be wasted. But thanks to alliance kernel, it is (automatically) mounted and used for dalvik cache (described HERE). Without it all the dalvik cache would occupy a lot of space in /data.
In MY CASE, the dalvik cache directory is as big as 98MB. By a simple calculation, I just think the mod can increase the data partition in 40MB, but will cause 98MB of dalvik cache to be moved to /data. So I decided that this new partitioning schema is not for me. I need more space in /data rather than /system.

Could I flash neo v kernel into neo ?

danisariandi said:
Could I flash neo v kernel into neo ?
Click to expand...
Click to collapse
I don't know about all.... But mostly it works!
Correct me seniors if I'm wrong
Sent from my MT11i using xda premium

For Locked bootloader the tutorial is much more long.
After flashing neo V system we need to flash .062 neo v kernel, make root, flash .587 neo kernel, install cwm, restore backup of the rom.
Sent from my MT15i using xda app-developers app

Bertellio said:
For Locked bootloader the tutorial is much more long.
After flashing neo V system we need to flash .062 neo v kernel, make root, flash .587 neo kernel, install cwm, restore backup of the rom.
Sent from my MT15i using xda app-developers app
Click to expand...
Click to collapse
You can шадфыр ROM without kernel, and load CWM via fastboot command:
fastboot boot kernel_with_cwm.img and restore ROM

i did but nothing happens
how could i check this method is working correctly

Confirmed.
It works. But flashing new firmware of Neo via Flashtool removes the partition and takes it back to old size.
So the solutions are:
1. Don't flash firmwares via Flashtool (flashing other ROMs via CWM doesn't crash the partition)
2. When you use flashtool,- just flash ROM from Neo V, and than any custom ROM via CWM.

engahmed91 said:
i did but nothing happens
how could i check this method is working correctly
Click to expand...
Click to collapse
Install any terminal emulator from the Market.
Enter to it and enter df command.
You will se full list of your partitions

MaxWorks said:
Install any terminal emulator from the Market.
Enter to it and enter df command.
You will se full list of your partitions
Click to expand...
Click to collapse
thank u
but now i`m sure that nothing change
any ideas?

MaxWorks said:
You can шадфыр ROM without kernel, and load CWM via fastboot command:
fastboot boot kernel_with_cwm.img and restore ROM
Click to expand...
Click to collapse
?
For locked bootloader root user is given from the rom, not from the kernel. The same is for cwm, as we lose it if we format /system.
Sent from my MT15i using xda app-developers app

Bertellio said:
?
For locked bootloader root user is given from the rom, not from the kernel. The same is for cwm, as we lose it if we format /system.
Sent from my MT15i using xda app-developers app
Click to expand...
Click to collapse
with fastboot boot you didn't flash kernel, only load kernel into phone, and after restart it's gone.

Related

[ODEX] on Any ROM | Now support AOSP ICS

UPDATE AOSP ICS BOOTCLASSPATCH ODEX
Flash the zip using any CWM Recovery.
This zip should be compatible on ANY ANDROID DEVICE using CWM based Recovery.
Plase make backup before apply this zip.
There is plenty of free space on /system partition,what a waste if we don't use them. :-D
If you're planing to modify any framework on your device,do it before you apply this zip.after applying this zip you cannot modify the framework except /system/framework/framework.apk
This zip will only make odex on /system/framework and /system/app
App on /data partition will not affected
More info : DEODEX VS ODEX
NOTICE : SUPPORT UP TO GINGERBREAD ROM
download link : odex-cwm.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
puppet13th said:
Flash the zip using any CWM Recovery.
This zip should be compatible on ANY ANDROID DEVICE using CWM based Recovery.
Plase make backup before apply this zip.
There is plenty of free space on /system partition,what a waste if we don't use them. :-D
If you're planing to modify any framework on your device,do it before you apply this zip.after applying this zip you cannot modify the framework except /system/framework/framework.apk
NOTICE : SUPPORT UP TO GINGERBREAD ROM
download link : odex-cwm.zip
Click to expand...
Click to collapse
Any method to revert this mod without using backup from cwm? I mean like a reverter or sth like that
This method seems really nice and I wanna try it but I have few questions in my mind as I haven't used CWM recovery ever before
Can I use flash tool to format and recover my ROM back after using this zip file?
Can I revert the change by any means?
Will I be able to use flashtool to update my ROM further in future cause I don't know anything about CWM...
Thanks.....
neroyoung said:
This method seems really nice and I wanna try it but I have few questions in my mind as I haven't used CWM recovery ever before
Can I use flash tool to format and recover my ROM back after using this zip file?
Can I revert the change by any means?
Will I be able to use flashtool to update my ROM further in future cause I don't know anything about CWM...
Thanks.....
Click to expand...
Click to collapse
U can revert this by usinf flastool,but it will reset anything And yes u will able to update further apdate if u use flashtool. Im thinkin is there any other way to revert it aside from using flashtool and cwm
Black_jackss said:
Any method to revert this mod without using backup from cwm? I mean like a reverter or sth like that
Click to expand...
Click to collapse
The easy way to revert is using CWM advanced restore
Only restore the /system partition
Before you do make sure you have about 100mb free internal space.
Sent from my ST17i
Nice but if im right isnt it used to speed up first five boots.
EDIT: you made de-odex zip for X8 so why not work on Minis or Walkman
Sent from my WT19i using Tapatalk
XperianPro said:
Nice but if im right isnt it used to speed up first five boots.
EDIT: you made de-odex zip for X8 so why not work on Minis or Walkman
Sent from my WT19i using Tapatalk
Click to expand...
Click to collapse
I made odex zip for x8.i have rewrite the script. Now it's should be compatible with any android device using CWM based Recovery.
My friend just applied the zip on zte blade, he says the zip applied successfully.
The main reason to use odex is user space optimization. Take a look at the screen shot.
Sent from my ST17i
Do I have to wipe dalvik cache?
garduna said:
Do I have to wipe dalvik cache?
Click to expand...
Click to collapse
It will automatically wipe the dalvik-cache
Just reboot after flashed the zip
Ummm.... I think Sony Stock roms arent odex'd... At least thats what i gor from the the kitchen when i tried to use it. Yaffs2 isnt odexed. Could be wrong...
Sent from my ST17i using XDA App
dumraden said:
Ummm.... I think Sony Stock roms arent odex'd... At least thats what i gor from the the kitchen when i tried to use it. Yaffs2 isnt odexed. Could be wrong...
Sent from my ST17i using XDA App
Click to expand...
Click to collapse
what are you trying to say?i can't get it.
odex have nothing to do with file system.
if you want to use kitchen,it need deodex framework,that why i said if you want to play with framework you need to modify the framework before doing odex.
if the rom was odexed,you can't use kitchen anymore.
Black_jackss said:
U can revert this by usinf flastool,but it will reset anything And yes u will able to update further apdate if u use flashtool. Im thinkin is there any other way to revert it aside from using flashtool and cwm
Click to expand...
Click to collapse
Thanks for help but see the twist in story...
I installed CWM on my XMP ... and i installed Xperia Mod ROM and found that this [ODEX] is already present in that rom
I got 40 MB Used and 380 MB Free Memory after flashing...
neroyoung said:
Thanks for help but see the twist in story...
I installed CWM on my XMP ... and i installed Xperia Mod ROM and found that this [ODEX] is already present in that rom
I got 40 MB Used and 380 MB Free Memory after flashing...
Click to expand...
Click to collapse
i just check.that one is not odex.
Code:
- v1.6 : Add features to install Dalvik2Cache (increase free space of /data over 60MB for more application)
it just move dalvik cache from /data/dalvik-cache to /cache/dalvik-cache
so it can free up some space on data partition.
Sorry it has been some time since I did the procedure. The thing is that there are no .odex files in order to de-odex
So basically Odexing allocates some memory from Sytem to Internal? hmmm...
puppet13th said:
i just check.that one is not odex.
Code:
- v1.6 : Add features to install Dalvik2Cache (increase free space of /data over 60MB for more application)
it just move dalvik cache from /data/dalvik-cache to /cache/dalvik-cache
so it can free up some space on data partition.
Click to expand...
Click to collapse
Ohh This is nice news
hey friend can you please tell me if i use this [ODEX] through CWM then will it work now? and will i get more free space ? like more 20 MB free ?
Deodex vs odex
dex --> dalvik executeable
this is executeable in android device.
this file like exe file in windows
in every apk contain a classes.dex file
DEODEX
after we install the apk the dalvik-vm extract classes.dex and optimized it to run on the device.that optimized dex file we call dalvik-cache that reside on /data/dalvik-cache
example :
Code:
APK
/data/app/com.rovio.angrybirds-1.apk
Optimized dex
/data/dalvik-cache/[email protected]@[email protected]
ODEX
ODEX stand for optimized dex
every apk and jar have it's pair
example angry bird in odex form :
Code:
APK
/data/app/com.rovio.angrybirds-1.apk
odex
/data/app/com.rovio.angrybirds-1.odex
in odex there is no classes.dex inside the apk and there is no dalvik-cache
comparison deodex vs odex
com.rovio.angrybirds-1.apk size --> 14.58MB
deodex form :
Code:
/data/app/com.rovio.angrybirds-1.apk --> 14.58MB
/data/dalvik-cache/[email protected]@[email protected] --> 1.09MB
total size 14.58MB+1.09MB = 15.67MB
odex form :
Code:
/data/app/com.rovio.angrybirds-1.apk --> 13.59MB
/data/app/com.rovio.angrybirds-1.odex --> 1.09MB
total size 15.59MB+1.09MB = 14.68MB
limitation on odex :
- the apk and odex file only can be used on the same dalvik-vm/device
- there is noway to modify framework in odex form
Whats difference in speed compared to "integrate dalvik cache to system ROM" in Titanium?
It worked for me!
I'll try and see the results
Thank you!
Dr_Quake said:
Whats difference in speed compared to "integrate dalvik cache to system ROM" in Titanium?
Click to expand...
Click to collapse
It's look like that new feature in Titanium was able to create odex.
Thanks for detail info
now I understood the difference
Just the freedom to edit firmware should have to be and then this would be awesomest and wowest

[ROM][GUIDE][RAY/ARC/ARC-S/NEO/NEO-V] JJ's Hybrid ROM 3.2 Stable (LOCKED BOOTLOADERS)

New:
BANNERS: Put this in your Signature ..Thanks OverLo4d for the banner
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PHP:
[IMG]http://img3.imageshack.us/img3/1434/jjhybridbanner.png[/IMG]
Click to expand...
Click to collapse
DONT REPORT BUGS IN ROM HERE. HEAD TO ORIGINAL THREAD FOR SUPPORT
Click to expand...
Click to collapse
Hi,
I got many PMs from Ray/ARC-S/ARC/Neo/Neo-V users to find a Method to install JJ's Hybrid ROM for Those with Locked Bootloaders...
YOU MUST HAVE OFFICIAL ICS INSTALLED ALREADY..
Before trying this method, you should know how to restore Phone using SEUS update for just incase if anything goes wrong...
I got idea from Arc user Flyig who gave a method and that might work... its not tested yet...
Follow the Steps as described below...
1) Root with 'Root_Exploit_OneClick'.
If you have already Rooted then there is no need to Root again...
If not then Follow Steps Blelow
a) Turn ON USB Debugging mode on your Xperia Phone and
b) Tick mark Unknown Resources
c) Extract the zip file Root_Exploit_OneClick.zip to your desktop
d) Attach the phone to pc, Open the 'run me' batch file. Phone will restart few 2-3 times and when it boots to Desktop, you will have Superuser application installed which is sign of successfull Root..
2) Install CWM Recovery
Again if you have CWM Recovery installed then you dont need to do this step
If not then just download the Application
Now download 'Xperia CWM Auto-installer' by pvyParts to install CWM recovery..
3) Download CWM Backups (THESE ARE NOT FLASHABLE ZIPS)
FOR XPERIA RAY
JJ's Hybrid ROM 3.2 Stable CWM Backup FOR Xperia Ray
(thanks Roio for the CWM Backup)
ORIGINAL SUPPORT THREAD: HERE
Click to expand...
Click to collapse
OR
FOR XPERIA ARC/ARC-S
JJ's Hybrid ROM 3.2 Stable CWM Backup FOR Xperia ARC/ ARC-S
(thanks rafu997 for the CWM Backup)
ORIGINAL SUPPORT THREAD: HERE
Click to expand...
Click to collapse
OR
FOR XPERIA NEO/NEO-V
JJ's Hybrid ROM 3.2 Stable CWM Backup FOR Xperia NEO
(thanks fr33styl3r7 for the CWM Backup)
NEO-V Patch 3.2 (For Neo-V users, Flash this patch after Restoring backup)
ORIGINAL SUPPORT THREAD: HERE
Click to expand...
Click to collapse
Extract it and copy to the SD Card to folder clockworkmod/backup/
4) Reboot to Recovery by pressing Volume Down key when blue LED light blinks or the Display brights up
5) In CWM Recovery, First do Full wipe then Go to Backup and Restore Menu.
Choose Restore and Select JJ'sHybrid ROM (if you copied it in correct path) and RESTORE...
Now Boot the ROM after Restore is complete...
Hopefully the ROM will be rooted by default.. If not then Follow One click Root method and Root it.. and Install CWM Recovery again using Xperia CWM Auto-installer..
INCASE THE METHOD DOESNT WORK OR YOU ARE STUCK WITH A BOOTLOOP then JUST RESTORE VIA SEUS UPDATE OR FLASH FTF..
Now Follow the guide test it yourself and Let me know if it works...
DONATORs: Hall of Fame (Thank you for your support)
Tarzan ,
ervin929,
Telis ,
funeiwski,
varben ,
verkuil,
calgior,
Eduardo,
sucker for sony's,
justmpm,
a4rocks,
f_zurzolo,
mortenchristensen,
fjdlcg,
pnlarsson,
Franz Bergen
Alfonso Chao Liu
Bertil Munkeby
Kloosek
Andrew Davies
jimbo777
Josef Behr
Click to expand...
Click to collapse
CREDITS:
Special thanks to
1) hansip87 for some of his Mods I used
2) Sirkay for Providing ICS Kernel with CWM
3) KANG Team for ROM Control
Instructions for Making CWM Backup for Those with UNLOCKED Bootloaders who want to help those with Locked Bootloaders..
its Simple and Easy..
1) Flash a STOCK Kernel with CWM recovery of your phone. Stock Kernel is a must as Locked bootloader guys are using Stock ones.
2) Go to Recovery, do a FULL WIPE (factory reset) and Flash My Latest ROM from the Thread.
4) Boot into ROM and wait till you see First Screen, i.e Language Setup Screen..Dont choose any language or do anything else.. Just press power and reboot to Recovery
5) In Recovery Make a CWM Backup. it will be located in SDCard/clockworkmod/backup
6) Zip that and Upload to Mediafire.com and send me the Download Link..
Simple as that...
it works!!! thanks jjdoctor
will there be a mod to add sweep panorama and sony keyboard ?
Works without no problems, thanks jjdoctor!
what the differ from the original JJ's ROM?
desaturated said:
what the differ from the original JJ's ROM?
Click to expand...
Click to collapse
This is for locked bootloader.
It must extract the .zip files..
work flawless
i hope this thread get the same update with the original ROM
It works flawless, i hope more devs makes stockkernel roms, like on the old X8 and X10 Mini times.
Finally we can install custom roms. Thnx alot JJ.
Sent from my ST18i using XDA
why xperia s theme doen't work on it? s: i just want the xperia s music player but it crash ,any idea?
Edit: Sony stuff doesn't work s:
p.d: srry for my bad english
Great Idea ! Thanks JJ
Thank
but i have 2 questions:
- the rom you posted is named arc, so is that the same for Arc S ?
- What do u mean by full wipe ? Cache or all ? ....
THAnk again
xparanoidx said:
why xperia s theme doen't work on it? s: i just want the xperia s music player but it crash ,any idea?
Edit: Sony stuff doesn't work s:
p.d: srry for my bad english
Click to expand...
Click to collapse
I am just worried how am I going to handle guys who never used a custom rom before...:-/
AxoO69 said:
Thank
but i have 2 questions:
- the rom you posted is named arc, so is that the same for Arc S ?
- What do u mean by full wipe ? Cache or all ? ....
THAnk again
Click to expand...
Click to collapse
BL unlocked ROM is obviously for ARC S users... ARC doesnt have official ICS update yet..
jjdoctor said:
JJ's Hybrid ROM 2.4b CWM Backup FOR Xperia ARC
(thanks goce.nakov for the Link)
Click to expand...
Click to collapse
It's a modified or a standard CWM v5 backup?
Finally created a rom for locked bootloader. It works on my Arc S. Thanks a lot JJ
Edit: I apply this solution but my contacts lost after 2-3 reboots
http://forum.xda-developers.com/showpost.php?p=25919953&postcount=1214
why i can't download the ROM?
The 2g toogle is not working...
Envoyé depuis mon Xperia ray avec Tapatalk
Seriously guys this thread was just a TEST.... head to original one for support.... dont reort bugs in Rom here...
just reply Rom worked or not..... thats it...
i m closing this thread after a few confirmations..........
Ok sorry, it's working thanks ^^
I'm french so I don't understand all ...
Envoyé depuis mon Xperia ray avec Tapatalk
I was forget the wipe thing, but is working fine..

Neo L [JB] [Kernel][Multibootable][TWRP][Dropped- Official is out]

Going official
Pls navigate to here.. http://forum.xda-developers.com/showthread.php?t=2138419
Code:
##############T&C#####################
By Unlocking the bootloader you warranty is void-->From SOny
This is free kernel from my side took me some time to figure
out how to /what to do to make this kernel
IF something happen with your device you will have to figure it out yourself..
I won't be held responsible if You Hard Brick your device.
Free advice:Soft brick
can be recovered by flashing firmware so keep that in handy--http://d-h.st/Vft
#####################################
All credit goes to cosmicDan
I just took his code from git and made few modifications to work for Neo L
As per this post http://forum.xda-developers.com/showpost.php?p=37372130&postcount=806 he will be making Turbo Kernel for All Xperia Devices... If that happens that will be cool
This one has
Dual Recovery-issues are there--Fixed in Feb Release
Working Camera
App2sd -Failed in JB
Dual boot video https://www.youtube.com/watch?v=9Cn6pBzxiXg
How to install see second post...
How to install
Please follow carefully. This Rom supports multibooting. It uses TWRP Recovery. The whole code is taken from CosmicDans Repo and compiled/Tweaked to boot for Neo L. The device name is Xperia Play but it will work good with our device.
JB Kernel Folder Dropbox Link-https://www.dropbox.com/sh/susu60gzzwo6cvz/AxXCJsygxW?m
1. Flash the kernel https://www.dropbox.com/s/hn09cipbff3nrai/boot.img
2. Boot into Recovery
Do a full wipe- Even wipe system if you are coming from another Rom
3. Flash any of the below Roms in first Slot(I have tested them both, you are free to experiment-thank Dev CosmicDan for his great work)
http://forum.xda-developers.com/showthread.php?t=1999484 Turbo UI
http://forum.xda-developers.com/showthread.php?t=2021373 [ROM][JB][AOSP]
http://forum.xda-developers.com/showthread.php?t=1975851 SlimBean
Known Bugs
TWRP can only restore COMPRESSED backups right now. Make sure you select "Use Compression" checkbox when making a TWRP backup! Will be fixed when my Linux machine is repaired.
TWRP "Factory Reset" option will erase sd-ext - be careful! Only way to *only* wipe data right now is to do it manually via shell. Final version will have "Factory Reset" button changed to "Wipe Data".
Detailed Report on CosmicDans post
http://forum.xda-developers.com/showpost.php?p=37372130&postcount=806
Youtube Link -Multibooting https://www.youtube.com/watch?v=xyWwshatX1I
Notice
If you are using app2sd factory resetting in any slot will wipe your ext partition so Change Recovery to Clockwork and do Factory reset
ScreenShots
Code:
Dual Booting Video-- https://www.youtube.com/watch?v=xyWwshatX1I
A little Dark Though have a look at it
Reserved
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dropbox error dev
Re: Neo L [JB] [Kernel]26-Jan-2013
Dropbox is fine, but the link is wrong.
Sent from my GT-P6200 using xda app-developers app
wifi WORK
but wifi tether NOT WORK
everything else OK
i hope u meant to give https://www.dropbox.com/sh/ciseft98kefq8ug/sonJMVGwAb/JB/boot.img this link??
ctnami said:
Dropbox is fine, but the link is wrong.
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
yep thanks for pointing out the error .. I have added the link to dropbox folder...
https://www.dropbox.com/sh/susu60gzzwo6cvz/AxXCJsygxW
Pls use the kernel named boot.img
harrier3 said:
wifi WORK
but wifi tether NOT WORK
everything else OK
Click to expand...
Click to collapse
Also native app2sd will give error.. I will try to get a fix may be in next release...
dude.. can i use this kernel for this rom http://forum.xda-developers.com/showthread.php?t=1957427 ??
belat01 said:
dude.. can i use this kernel for this rom http://forum.xda-developers.com/showthread.php?t=1957427 ??
Click to expand...
Click to collapse
no i guess ...
sagar.bendale said:
no i guess ...
Click to expand...
Click to collapse
ow. thnx dude..
getting process.android.phone has stopped. and many other apps stopped msg
sagar.bendale said:
getting process.android.phone has stopped. and many other apps stopped msg
Click to expand...
Click to collapse
you need to install non multiboot supported Roms in first slot.. other multiboot Roms on other slots..(not tested)
I am using this with Turbo UI in first slot and its workign perfect.. .. need to do a full wipe before installing the rom on first slot..
b00tbu9 said:
you need to install non multiboot supported Roms in first slot.. other multiboot Roms on other slots..(not tested)
I am using this with Turbo UI in first slot and its workign perfect.. .. need to do a full wipe before installing the rom on first slot..
Click to expand...
Click to collapse
first time :: did same... flashed cosmic dan's kernel.. then installed turbo ui then flashed ur kernel.. didnt work.
2nd try :: flashed ur kernel, installed turbo ui .. again no luck
3rd try : again no luck
now gonna try again downloading all the files
Nope.. not working
sagar.bendale said:
first time :: did same... flashed cosmic dan's kernel.. then installed turbo ui then flashed ur kernel.. didnt work.
2nd try :: flashed ur kernel, installed turbo ui .. again no luck
3rd try : again no luck
now gonna try again downloading all the files
Nope.. not working
Click to expand...
Click to collapse
Okey buddy flash my kernel Get into recovery in the 4th option select Recovery as CWM(system will reboot) and enter into TWRP-- Select Wipe tab do a full wipe install Turbo UI it will work..:good:
b00tbu9 said:
Okey buddy flash my kernel Get into recovery in the 4th option select Recovery as CWM(system will reboot) and enter into TWRP-- Select Wipe tab do a full wipe install Turbo UI it will work..:good:
Click to expand...
Click to collapse
didnt get u, so u mean i should flash ONLY install ur kernel and install turbo ui in SLOT 4 .. right???
plzzzzzzzzzz
can any one say me about multi booting and process of that multibooting in neo l:crying:
sory for my numb question
lots of FC upon boot up. :crying: reverted back to cm7.
Guys don't try multiboot now.. it won't boot :d I tested yesterday..
Install rom only in the first slot...
Getting FC I got it never... follow the steps... else you will get FC
Get the Turbo Kernel flash it.. Install Turbo UI or asop JB by cosmicDan(and thank him for the work) Do the normal full wipe(wipe data system-partition etc)
Then flash My kernel given in the link.. flash boot.img only

Testers needed for Xperia Nexus Rom

Hi everyone,
I don't need any testers for now.
I require some testers to test my rom and give feedback. The devices are :-
1. Xperia Mini ST15i ( Confirmed to be working by me )
2. Xperia Mini Pro SK17i ( Confirmed to be working by stikki )
3. Xperia LWW WT19i ( Not tested )
4. Xperia Active ST17i ( Confirmed to be working by pedala_02 )
Download link - http://d-h.st/Asc
File size - 190.01MB
Bootloader : - Will work on both.
Instructions : -
1. Download the all-in-one zip of the rom.
2. Place both on your SD card.
3. Go to CWM, wipe data/factory reset, wipe cache partition, advanced---> wipe dalvik cache, mounts & storage-----> format /system.
4. Install zip from SD card.
5. Choose Xperia Nexus V4.zip
6. BE SURE TO SELECT THE CORRECT DEVICE AND BOOTLOADER IN AROMA!
6. Reboot your device and please tell me if the rom works.
Things to test
1. Booting on devices other than ST15i.
2. Camera Flash working or not working.
3. Dial *#*#7378423#*#* and check the model info. ( It must show your device model )
4. Proximity Sensor during a call.
5. If you come across any other bug then please inform me.
Changelog
-- Changed base to anerik's .587 Aroma Zip
-- Cleanly built with a single zip for all devices
-- Fixed flashlight, service menu bugs.
-- Back to kill added in Setting--> Developer Options
-- Updated SystemUI ( AOSP Status icons )
-- Added options to recovery menu
-- Changed to Nova Launcher
-- Added Crossbreeder for better performance
-- Updated build.prop tweaks
-- Included Project Fluid by mv_style
-- AOSP Keyboard with gesture input ( even better than Xperia Keyboard )
-- Nexus 4 Official stock boot animation
-- Added CWM in the rom for those on locked bootloader
-- Updated some icons
-- Included Qualcomm's Official BatteryGuru App
Screenshots of V4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanking you,
abcdjdj.
Lww, active and base rom uploaded. Currently uploading mini pro patch.:thumbup:
Sent from my LT26i using xda app-developers app
Changelogs please
Sent from my WT19i
mbahchen said:
Changelogs please
Sent from my WT19i
Click to expand...
Click to collapse
Updated. This is the V3.5 of my rom which I hope will work on all the devices.
Sent from my LT26i using xda app-developers app
abcdjdj said:
Updated. This is the V3.5 of my rom which I hope will work on all the devices.
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
So there is no new mod or app in v4, right?
Sent from my WT19i
mbahchen said:
So there is no new mod or app in v4, right?
Sent from my WT19i
Click to expand...
Click to collapse
Absolutely wrong. V4 will ofcourse have new mods. This is V3.5 only. I with great difficulty made new patches for all devices and only want to confirm if it is working. Don't you think that before adding new features it is better to first make sure that the rom boots on all devices?
Sent from my LT26i using xda app-developers app
abcdjdj said:
Absolutely wrong. V4 will ofcourse have new mods. This is V3.5 only. I with great difficulty made new patches for all devices and only want to confirm if it is working. Don't you think that before adding new features it is better to first make sure that the rom boots on all devices?
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Ok bro, i'll try this rom tonight. Hope it will be great :beer:
Sent from my WT19i
Mini pro patch uploaded!
Sent from my GT-P3100 using xda app-developers app
hi
i install in lww but phone not load and screen is on but nothing
ali14904 said:
hi
i install in lww but phone not load and screen is on but nothing
Click to expand...
Click to collapse
Could you please be a bit more specific? What is the problem?
Doesn´t boot on active. Gets past kernel logo, but then the screen goes blank (backlight is working(I assume ali14904had the same problem)).
Tai11 said:
Doesn´t boot on active. Gets past kernel logo, but then the screen goes blank (backlight is working(I assume ali14904had the same problem)).
Click to expand...
Click to collapse
I think that there is no bootanimation. Please wait for 5 mins and tell me if you see the home screen laucher. If nothing happens for 5 mins then it is a serious problem.:crying:
i install according to order that above listed
after reboot phone not loaded and after logo panic phone not load
ali14904 said:
i install according to order that above listed
after reboot phone not loaded and after logo panic phone not load
Click to expand...
Click to collapse
If the backlight works, then just let the phone take it's own time to boot. First boot takes around five minutes. This must only be a problem in the bootanimation.
Sent from my LT26i using xda app-developers app
ok, i lets the phone 10 minute but not load.
i think the patch is problem
I let it boot for 45 mins and still no use. Still blank screen. It appears to be something more serious.
Tested on Mini Pro SK17i
Installed and booted fine
Correct device model displayed
Bugs - no flash on camera and selecting flashlight in quick panel causes System UI to stop - as far as I can tell they're the only bugs.
Runs quicks, games & videos play good with really good picture quality.
Sound is crisp and clear on videos and music player.
Doesn't seem laggy and good power use.
Other than the fact I don't like the launcher (but thats just my preference) seems a good rom - with some tweeking for my preferences I'd use it.
Its always stuck (black screen) after lupus logo
Sent from my Xperia Live with Walkman using xda premium
Firstly, a really big thanks to all the testers. This rom doesn't seem to work on lww and active. Here is what you can try-
1. Extract the base rom to a folder, say Nexus.
2. Inside the Nexus folder you will find system folder, Meta-inf, data folder.
3. Delete the entire Meta-inf folder.
4. Then extract your device patch to the Nexus folder. You will be asked to overwrite a few files. Just say yes to all.
5. At.this point, you will have the Meta-inf folder of your patch. Then using winrar, make a zip file of all the folders and files - system, Meta-inf, data, busybox, fixpermissions etc.
6. Try flashing this on your phone and see if it works.
Once again, I would like to deeply thank all of you.
Thanking you,
abcdjdj
Sent from my LT26i using xda app-developers app
abcdjdj said:
Hi everyone,
I require some testers to test my rom and give feedback. The devices are :-
1. Xperia Mini ST15i ( Confirmed to be working by me )
2. Xperia Mini Pro SK17i ( Confirmed to be working by stikkki )
3. Xperia LWW WT19i ( Not booting )
4. Xperia Active ST17i ( Not booting )
Download link - http://d-h.st/users/abcdjdj/?fld_id=11304#files
I am currently still uploading the files. Please wait if you don't find your device's patch in the link.
Bootloader : - Will work on both. Note that for locked bl, you will lose CWM after installing this rom.
Instructions : -
1. Download the base rom and your respective device patch.
2. Place both on your SD card.
3. Go to CWM, wipe data/factory reset, wipe cache partition, advanced---> wipe dalvik cache, mounts & storage-----> format /system.
4. Install zip from SD card.
5. First install the base rom, then without rebooting, directly install the patch for your device.
6. Reboot your device and please tell me if the rom works.
Things to test :-
1. Booting on devices other than ST15i.
2. Camera Flash working or not working.
3. Dial *#*#7378423#*#* and check the model info. ( It must show your device model )
4. If you come across any other bug then please inform me.
Changelog - http://forum.xda-developers.com/showpost.php?p=37246084&postcount=2
Thanking you,
abcdjdj.
Click to expand...
Click to collapse
screen shots plz

[MOD]{CM10.1}{CM10.2}{CM11}{AOSP}Working Int2Ext for Xperia 2011 [ART-compatible]

After days of looking for a solution to the problem of every 2011 device I've finally managed to do it!
Many of you wanna enable ART functionnality in 4.4.2 because the device start "flying" with such a pill. So I've managed to modify the Int2Ext v2 script to run it lagless and conserving initial performance.
Prerequesites:
1. You have to make an EXT partition (I've got an EXT4 1 GB partition)
2. Flash the script BEFORE the first boot (like any other package such as gapps).
3. (Optionnal) Reboot once, and enable ART in developement menu.
4. Enjoy!
What it does exactly?
1. Increase the readahead cache for your sd to 4096 kb
2. Transfers /data/app & /data/app-private to the ext partition of the SD
3. Everything that a CronMod-INT2EXT script does
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All credits goes to the creator of the original script. Ive simply deleted a line inside
You're welcome for testing.:good:
Small FAQ & corrected verision to avoid signal loss:
nos1609 said:
1. Tested in couple with Vanir/Carbon - unstable under ART, Dalvik recommanded
Tested on PAC working like a charm on both ART & Dalvik
2. To avoid reboots / FCs try flashing ART compatible gapps
3. About the "internal memory waste" Guys, please check the description of what the script is doing and what folders are moved onto EXT-partition. If everything would so simle as that, even ART mode couldn't overcome the laggynes and the lack of performance after moving everything to sdcard. The script is moving ONLY APKs to the EXT-partition. Dalvik, libs etc remains on the 470 Mb NAND to conserve initial performance. But enen that amount of free space is not enough to run ART experience at it full potential. because of very large dalvik-cache size.
4. EXT partition. Just google, XDA contains tons of manuals and tools to create one. If you'd like to simply try ART 512 MB one will be enough, you'll reach the internal NAND limitation. If you want using it in normal mode you can make the partition as large as you like.
5. Concerning the loss of signal, I think there are some lack of time for the device itself to get the new location of the files, so try this new package.
Click to expand...
Click to collapse
UPDATE: Working fix for signal loss
It's running brilliantly onthe latest CarbonRom on my Satsuma. The partitions now mean I don't need Link2SD. Seems stable so far. Many thanks. Great idea.
nos1609 said:
After days of looking for a solution to the problem of every 2011 device I've finally managed to do it!
Many of you wanna enable ART functionnality in 4.4.2 because the device start "flying" with such a pill. So I've managed to modify the Int2Ext v2 script to run it lagless and conserving initial performance.
Prerequesites:
1. You have to make an EXT partition (I've got an EXT4 1 GB partition)
2. Flash the script BEFORE the first boot (like any other package such as gapps).
3. (Optionnal) Reboot once, and enable ART in developement menu.
4. Enjoy!
What it does exactly?
1. Increase the readahead cache for your sd to 4096 kb
2. Transfers /data/app & /data/app-private to the ext partition of the SD
3. Everything that a CronMod-INT2EXT script does
All credits goes to the creator of the original script. Ive simply deleted a line inside
I'll upload some screens tomorrow. Meanwhile, you're welcome for testing.:good:
Click to expand...
Click to collapse
Do I have to flash script immediately after install the rom?
Edsephiroth said:
Do I have to flash script immediately after install the rom?
Click to expand...
Click to collapse
Yes, just before booting first time
nos1609 said:
Yes, just before booting first time
Click to expand...
Click to collapse
I experimented, and found that it only worked if I flashed after first boot.
-Flash Kernel
-Flash Rom
-Flash GApps
-Boot
-Flash Script
-Reboot
-Turn on ART
-Reboot
Wow it looks great I wanna try but whether it should work only in a fresh install of Rom??
Sent from my WT19i using XDA Premium 4 mobile app
---------- Post added at 06:04 AM ---------- Previous post was at 05:43 AM ----------
And have anyone try it on Ext3?
Sent from my WT19i using XDA Premium 4 mobile app
Mine got problem storage running out and can't install any app (from Play Store & apk) even with fresh installation.
any idea?
Problem!!
I flashed the script before booting first time after flashing the rom but it dod not work. Then i flashed the script after first boot,it worked. But now my phone is not detecting sim card and also in settings baseband version,IMEI number are gone. Please help!!
-deleted-
acoongg said:
-deleted-
Click to expand...
Click to collapse
Thank you bro.Flashing kernel again worked. But everytime i restart the phone i have to flash kernel again to make phone detect sim card
Its work...
thanks :good:
Coconut90 said:
Its work...
thanks :good:
Click to expand...
Click to collapse
did'nt face error like unknown baseband?
acoongg said:
did'nt face error like unknown baseband?
Click to expand...
Click to collapse
Nope
I think
Just check my screenies before and after flash script
Im tested it with VanirAOSP 4.4.2 | Unofficial.
Now im testing with Carbon so after check give u report.
Sent from my WT19i using xda premium
Coconut90 said:
Nope
I think
Just check my screenies before and after flash script
Im tested it with VanirAOSP 4.4.2 | Unofficial.
Now im testing with Carbon so after check give u report.
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
It didn't work on Beanstalk 4.4.270. I flashed before and after first bot, always clean install, but it stucks on boot logo.
Sorry for my noob but can someone please guide me through making an ext4 partition? (._.)
I would love to use ART without lack of space
Sent from my WT19i using XDA Premium 4 mobile app
Some more confirmation pics for other friends to try out
Sent from my WT19i using xda premium
coolancool said:
Sorry for my noob but can someone please guide me through making an ext4 partition? (._.)
I would love to use ART without lack of space
Sent from my WT19i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
use this link
Some One Can You help me
I'm Use CM11 Than I Do instal Your Script But My Signal (3G) Has been Lost & No Signal, How About This Problem?
This My Steps :
1. I' m Flash CM11 In My Smultron Device...
2. Than Flash Gapps, & Restart First
3. I'm Flash Your Script
5. I'm Restart My Device But (3G) Signal Has been Lost...
6. I'm Remove Your Script Signal Has been Normaly
7. The Script is Working But my Network Lost
8. How About This?
SigitCGumilars said:
Some One Can You help me
I'm Use CM11 Than I Do instal Your Script But My Signal (3G) Has been Lost & No Signal, How About This Problem?
This My Steps :
1. I' m Flash CM11 In My Smultron Device...
2. Than Flash Gapps, & Restart First
3. I'm Flash Your Script
5. I'm Restart My Device But (3G) Signal Has been Lost...
6. I'm Remove Your Script Signal Has been Normaly
7. The Script is Working But my Network Lost
8. How About This?
Click to expand...
Click to collapse
How big is your ext4 partition?
Sent from my Xperia Mini Pro using Tapatalk
acoongg said:
How big is your ext4 partition?
Sent from my Xperia Mini Pro using Tapatalk
Click to expand...
Click to collapse
Before I did much as 728MB FAT32 partition. This is caused because I did not do a partition with label Ext-4?

Categories

Resources