Title says it all. What's The Best CPU Clock Speed for Daily Use? At the moment I'm at 1.2GHz by the way. By best I mean highest without burning out ect. Cheers in advance.
Noone will be able to tell you what the best speed for your processor is because of the variations between processors even in the same batch. Besides, define "best"? What's best for you? The most stable? The quickest? In computer industry overclockers follow this rule - keep overclocking until the processor starts to fail, then either overwolt and make it stable or decrease the frequency slightly. Extreme overclocking involves extreme overwolting and pushing your proc. to the highest frequency it can possibly go. Different processors can handle different speeds because of the slight variations in them. Whenever you overclock you should remember that you are shortening the live of your processor and the more you overclock, the more you do it, due to the process called electromigration, your processor will gradually start to "leak" current.
i made 2 profiles.. use 1.5 ghz for games and surfing and 1.2 ghz when i use for playing videos or music..
Sent from my YP-G70 using xda app-developers app
Im using 1.5 Ghz @ 1.3V ( stock voltage) . Runs just fine , get about 2500 points in quadrant and fairly good battery life .
For those, who only uses the music function could go this way:
Set with antutu min 100 mhz max 200 mhz and ondemandx or interactivex governor. Battery life should be very nice. Poweramp was a battery drainer, but since 4 months of using this setup Pamp only uses 2-3% per hour. Battery life @standby is also better.
How do you guys make it to 1.5Ghz?
Im using Chips 1.5 and RJ's kernel..
using setcpu and no frills i can set it to 1.2Ghz..and cant go beyond that as there are no other options..
i've also used tegrak (not the ultimate version) and still the same..
I'd greatly appreciate if someone could help..
thanks in advance!
You guys use some high clock speeds lol. For music and videos you can get away with 200 mhz min to 400 mhz max and have no issues. Web surfing I keep both a 400 mhz and for gaming (like snes and genesis emulator no 3d ) I use 400mhz min to 800mhz max. I use smartassV2 or ondemamd for the governor.
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 07:12 PM ---------- Previous post was at 07:09 PM ----------
tried that and it lags or stutters when it goes to deep sleep the lowest I'd go for the min and max is 200 but you see some noticable slowdown lol
Sent from my GT-I9000 using xda app-developers app
jedz2005 said:
How do you guys make it to 1.5Ghz?
Im using Chips 1.5 and RJ's kernel..
using setcpu and no frills i can set it to 1.2Ghz..and cant go beyond that as there are no other options..
i've also used tegrak (not the ultimate version) and still the same..
I'd greatly appreciate if someone could help..
thanks in advance!
Click to expand...
Click to collapse
u must use ultimate version of tegrak..i use 1.5 ghz on 1310 mv core and internal 1125mv ..that is just tiny more then stock voltage (1300 and 1100) so i get veru good speed and good batery life...and i dont now how u use player on such low fq and so very slow speed and heavy lag..i use mine on 1.5 ghz and it gets all day no probem and i fill him when i go to sleep..
Sent from my YP-G70 using xda app-developers app
Be patient, kernel with overclocked gpu,bus and cpu from me incoming
Wysyłane z mojego YP-G70 za pomocą Tapatalk 2
KOala888 said:
Be patient, kernel with overclocked gpu,bus and cpu from me incoming
Wysyłane z mojego YP-G70 za pomocą Tapatalk 2
Click to expand...
Click to collapse
For which device?
Sent from my YP-G70 using xda app-developers app
Can anyone get Nova 3 with Chainfire going smooth with like 1.6GHz?
for 5.0 but I think I could do it for other devices as well.
It was smooth for me w/o chainfire with standard 4.04 kernel for our device
Wysyłane z mojego YP-G70 za pomocą Tapatalk 2
Related
Hey All,
I have installed Foxhound ROM for ICS and loaded the Siyah Kernal.. The ROM itself is great, I have also overclocked the CPU to 1.7Ghz, But i see some battery warming issues. I have installed NStools as well.
Any recommendations what under volting can i use with this config?
mateenf said:
Hey All,
I have installed Foxhound ROM for ICS and loaded the Siyah Kernal.. The ROM itself is great, I have also overclocked the CPU to 1.7Ghz, But i see some battery warming issues. I have installed NStools as well.
Any recommendations what under volting can i use with this config?
Click to expand...
Click to collapse
Why overclock,do u experience any difference in speed in daily use,except in benchmark..
Btw an app is installed with siyah called STweaks,it controls all kernel features.read first page post 4-5 by droidphile,excellent guide
zodiaxe66 said:
Why overclock,do u experience any difference in speed in daily use,except in benchmark..
Btw an app is installed with siyah called STweaks,it controls all kernel features.read first page post 4-5 by droidphile,excellent guide
Click to expand...
Click to collapse
Yes I have observed changed after overclocking.. The s3 boots up way faster plus for gaming it showed me real difference specially playing real racing 2 with 1.4 and 1.7..Now I only need to undervolt correctly so I can save on my batter life.. Can we set a custom voltage for 1.7 below stock values??
Sent from my GT-I9300 using xda app-developers app
mateenf said:
Yes I have observed changed after overclocking.. The s3 boots up way faster plus for gaming it showed me real difference specially playing real racing 2 with 1.4 and 1.7..Now I only need to undervolt correctly so I can save on my batter life.. Can we set a custom voltage for 1.7 below stock values??
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
stock voltage for 1.7 ghz is 1400mv, try undervolting by -50mv to -100mv and stick with one which is stable
use setcpu
keep changing it down in increments of 12.5mv and do the strees test keep doing that till u find a value that works
ps once u've done that let's us know what it is.
1088mv for 1200mHz that's the top freq I use so I never played with the voltages for the freq above it.
Hope this helps
remember thanks if it did
Sent from my GT-I9300 using xda premium
---------- Post added at 02:58 PM ---------- Previous post was at 02:01 PM ----------
k did the testing for ya
on MY DEVICE (Every device slightly diff)
1704MHz voltage 1288mv (put in 1290mv it will round it down)
if that don't work or is not stable for u then the next step up is to 1300mv .
775 mv for 100MHz .
hope this helps and if it did thanks is only 1 click away.
Sent from my GT-I9300 using xda premium
bala_gamer said:
stock voltage for 1.7 ghz is 1400mv, try undervolting by -50mv to -100mv and stick with one which is stable
Click to expand...
Click to collapse
Thanks Bala, Stressing the phone to -50mv at the moment.. Have you tried at -100mv? whats the result so far?
Also when charging I observe my phone warming a little.. Is that good?
We all know that our ace sucks on battery & after finding that calibration is a myth, I was kinda broken The only thing that helps us long on our battery is underclocking. There was no thread for this, so I decided to create one ! So guys, please share your frequencies, governors, I/O scheduler, rom name, kernel used & battery life for varied usages ( less, moderate & heavy ). If underclocking hasn't decreased your performance but at the same time if it has improvised battery life then it's worth sharing ! Help people love their battery that hate it like hell now
Sent from my GT-S5830 using xda premium
Rom: REVOLUTiON Ultimate Xperia Edition.
Cpu: min 245 - max 787
Governer: SmartassV2 or sometimes OndemandX
I/O: deadline
Still Very Fast, very smooth, no lag, less ram uses and definately get atleast 1 day battery backup with some heavy uses...
Sent From REVOLUTiON Ultimate Xperia Edition Rom..
:beer:
You can try 614-245 Mhz. Still smooth and fast.
Kakashi Hatake said:
You can try 614-245 Mhz. Still smooth and fast.
Click to expand...
Click to collapse
On which rom?
Sent From REVOLUTiON Ultimate Xperia Edition Rom..
:beer:
kranti.ace said:
On which rom?
Sent From REVOLUTiON Ultimate Xperia Edition Rom..
:beer:
Click to expand...
Click to collapse
MIUIXXX
Kakashi Hatake said:
MIUIXXX
Click to expand...
Click to collapse
Will take up time to entering into an heavy app..not able to do hard multitasking..
Sent From REVOLUTiON Ultimate Xperia Edition Rom..
:beer:
I use sgs 2 v10.1, battery extender kernel 1.5.1 oc, governor : smart ass v2 , i/o scheduler : sio, max : 614 & min : 122. Opera mobile takes a bit time to load but works fine then on. I use go launcher ex with many themes installed & it runs flawlessy ! Battery backup was good but not great...
Sent from my GT-S5830 using xda premium
Current governor : conservative. I/O scheduler : deadline on the same rom & kernel as stated before & with the same max, min set. Battery was @ 46% after 16 hrs which included an hour of browsing on edge, calls & messages.
Sent from my GT-S5830 using xda premium
Why underclock the whole thing if you can just set a screen off profile? Using the phone while under clocked won't really give much battery. The Ace is a battery hog during screen on either way no matter what clock it's set at. All of you guys use your phone differently so that's why your battery usage varies.
Y U NO CHECK MY SIGNATURE?!
SuperAce609 said:
Why underclock the whole thing if you can just set a screen off profile? Using the phone while under clocked won't really give much battery. The Ace is a battery hog during screen on either way no matter what clock it's set at. All of you guys use your phone differently so that's why your battery usage varies.
Y U NO CHECK MY SIGNATURE?!
Click to expand...
Click to collapse
You are right.
I never over and underclock my ace..still it is fast and good battery..
Sent From REVOLUTiON Ultimate Xperia Edition Rom..
:beer:
SuperAce609 said:
Why underclock the whole thing if you can just set a screen off profile? Using the phone while under clocked won't really give much battery. The Ace is a battery hog during screen on either way no matter what clock it's set at. All of you guys use your phone differently so that's why your battery usage varies.
Y U NO CHECK MY SIGNATURE?!
Click to expand...
Click to collapse
Thanks for this useful post ! I'll try setting profiles as you said & hope that my battery lasts a bit longer than now. What app do you recommend to set the profiles ?
Sent from my GT-S5830 using xda premium
i use Apocalyse ROM final which is the fastest I found so far and set to
CPU min 122
CPU max 787
Govenor smartassV2
Battery keeps normally 16-24h (no flight mode in the nigh) depending on usage.
I load battery until 4pm and can use phone until next day up to 24h
---------- Post added at 03:42 PM ---------- Previous post was at 03:32 PM ----------
Venomous Viper 119 said:
Thanks for this useful post ! I'll try setting profiles as you said & hope that my battery lasts a bit longer than now. What app do you recommend to set the profiles ?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
i tried but all apps for profile settings shortened the battery life. With smartassV2 and CPU settings in der ROM it is enough. This is my experience with my ACE
lavemetoo said:
i use Apocalyse ROM final which is the fastest I found so far and set to
CPU min 122
CPU max 787
Govenor smartassV2
Battery keeps normally 16-24h (no flight mode in the nigh) depending on usage.
I load battery until 4pm and can use phone until next day up to 24h
---------- Post added at 03:42 PM ---------- Previous post was at 03:32 PM ----------
i tried but all apps for profile settings shortened the battery life. With smartassV2 and CPU settings in der ROM it is enough. This is my experience with my ACE
Click to expand...
Click to collapse
It is always a bit confusing when you find different reviews like this. Anyways, I'll try it & if it works, fine. If not, I'll back off...
Sent from my GT-S5830 using xda premium
How to set screen off profiles ? Using tasker ?
Sent from my GT-S5830 using xda premium
Venomous Viper 119 said:
How to set screen off profiles ? Using tasker ?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
umm, go to my signature thread maybe It can help you :S
HOW TO SAVE YOUR BATTERY WITHOUT ANY APP!
I was thinking about doing a Extreme version with 614-245 MHz uc
Viper The Ripper said:
umm, go to my signature thread maybe It can help you :S
HOW TO SAVE YOUR BATTERY WITHOUT ANY APP!
I was thinking about doing a Extreme version with 614-245 MHz uc
Click to expand...
Click to collapse
Thanks buddy. I think I had gone through this thread of yours before. Thanks for reminding me of this, will give it a try later !
Sent from my GT-S5830 using xda premium
Rom : PacMan Rom v22.0.0
CPU Max : 748MHz
CPU Min : 122MHz
Governor : Smartass V2
Stable and less never heats (which means less crashes)
I use Screen off Profile for underclock, Smartass, around 700 max and 200 min..
Dont use now as I amon ultimatum rom and I am testing it so dont need that but mostly I use these settings and Battery lasts 2 days
I dont play games
After trying out many ROMs and trying various combinations of Clock Speed and Govnors, i personally feel that:
FOR BETTER BATTERY LIFE- Clock Speed: 245 - 787, Govenor- ONDEMAND (am getting 1d 5 hrs battery life with 2 hrs talktime, full time 2G connected and 3 hrs wi-fi browsing using Battery Extender 1.2)
FOR PERFORMANCE: clock: 245- 806, Govnor- SMARTASSV2
To save Battery you can further UnderClock it but I feel 787 is apt.
cennation4apprentice said:
I use Screen off Profile for underclock, Smartass, around 700 max and 200 min..
Dont use now as I amon ultimatum rom and I am testing it so dont need that but mostly I use these settings and Battery lasts 2 days
I dont play games
Click to expand...
Click to collapse
I've been hearing of these profiles for quite a time. How do you set them? Using set CPU app or something ? Can anyone elaborate?
Sent from my GT-S5830 using xda premium
So guys, how good does your YP-G70s do while running "heavy" games such as Asphalt 7, Modern Combat 4 and Nova 3, for example?
Most of the times I get huge lag while playing those games...some long freezes and quite annoying lags, even if I'm using Chainfire. I'm guessing this happens thanks to the fact that this device has only 376MB RAM, but that is just a rough guess. The lags occur even if I run games when I had more than 200mb free RAM, so I don't see how I could help it.
Also, please don't forget to post your system specs!
I'm currently running the GingerBread stock rom, overclocked to 1.5ghz and with a 256mb SD Ram Swap.
So, can you guys get a good performance while running heavy games?
Rizera said:
So guys, how good does your YP-G70s do while running "heavy" games such as Asphalt 7, Modern Combat 4 and Nova 3, for example?
Most of the times I get huge lag while playing those games...some long freezes and quite annoying lags, even if I'm using Chainfire. I'm guessing this happens thanks to the fact that this device has only 376MB RAM, but that is just a rough guess. The lags occur even if I run games when I had more than 200mb free RAM, so I don't see how I could help it.
Also, please don't forget to post your system specs!
I'm currently running the GingerBread stock rom, overclocked to 1.5ghz and with a 256mb SD Ram Swap.
So, can you guys get a good performance while running heavy games?
Click to expand...
Click to collapse
Since our player is only single cored and only has 1/2 a GB of ram, performance demanding games do not work as well. NOVA 3 runs somewhat well, but Asphalt 7 is unplayable. Using a custom ROM is the best way to go if you want a bit extra performance.
Sent from my YP-G70 using xda app-developers app
Running on CM10.1 with overclocked GPU seems to work, Dungeon Hunter 4 which was jerky on stock based rom and custom kernel hardly helped but on CM10.1 with Sultan Kernel, it runs it perfect!
Using chain fire maxes out the graphics on games which causes extra lag such as on Nova 3
Sent from my YP-G70 using xda premium
Try using CM10.1 and Sultan's kernel overclocked to 1.6GHz(1.7 is unstable)
I´m want it...
phckopper said:
Try using CM10.1 and Sultan's kernel overclocked to 1.6GHz(1.7 is unstable)
Click to expand...
Click to collapse
Hi, where can I get it?
Regards...
stonerax said:
Hi, where can I get it?
Regards...
Click to expand...
Click to collapse
Here it is: http://forum.xda-developers.com/showthread.php?t=2252851
Just remember this kernel is only for the CM10.1 ROM.
I got GTA vice city and it works better than my galaxy tab 2, currently using Mercurius reborn RC1 since it seems a bit more stable than sultan, any I/O Scheduler and CPU governor recommendations?
You have only SIO scheduler in my kernel
About governor, when you play then the performance should do the thing. It keeps your device at maximum frequency.
Wysyłane z mojego Nexus S za pomocą Tapatalk 2
Tried performance but I was getting some random reboots @ 1320, I'm using interactive at it works pretty smooth so far
Sent from my YP-G70 using xda app-developers app
and with 1520?
Yup I choosed too low voltages because my device undervolts very well. You can use voltagecontrol from play store or wait for new version which will be probably today
Wysyłane z mojego Nexus S za pomocą Tapatalk 2
KOala888 said:
and with 1520?
Yup I choosed too low voltages because my device undervolts very well. You can use voltagecontrol from play store or wait for new version which will be probably today
Click to expand...
Click to collapse
Just tried and the game was kind of laggy then it crashed after 30 sec, didnt reboot though
I am really surprised that there is such a difference between two devices. I can run gpu even at 260mhz.
Wysyłane z mojego Nexus S za pomocą Tapatalk 2
What IO Scheduler you are using?? To use in games.
Personally I recommend SIO.
Wysyłane z mojego Nexus S za pomocą Tapatalk 2
The ram is the biggest problem, when you fill the galaxy goes slow, if it had been larger, the performance they would have benefited greatly
over 440 dedicated to user is a probles? Wouldn't say so, really on gb you had abot 360mb!
BUS is the biggest problem, cpu a bit too
Wysłane z mojego Nexus S za pomocą Tapatalk 2
Guys I'm running original ROM and kernel and I have been able to overclock all the way to 2.0ghz STABLE
NO lag on any of those games and running at full detail
Sent from my YP-G70 using xda app-developers app
bassbrick15 said:
Guys I'm running original ROM and kernel and I have been able to overclock all the way to 2.0ghz STABLE
NO lag on any of those games and running at full detail
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
You haven't encountered any games that won't run on android 2.2 froyo?
Sent from my YP-G1 using Tapatalk 2
stop trolling
Wysłane z mojego Nexus S za pomocą Tapatalk 4
My aim is to make kind of minimalistic, debloated kernel which will be perfect for daily usage and it will be speed demon whenever you would like to play some games
Please respect my time spend on doing that kernel and read at least those few opening posts
You probably would like to have the best kernel possible so please left here TONS of feedback and opinions, suggestions, etc
I won't write that my kernel is super and the fastest and that every feature/update give +50% performance, it is stupid attitude.
FEATURES:
*BFS (brain**** scheduler) - doesn't give too much cpu boost but make performance more stable
*fsync disabled
*o3 and ofast optimiaztion - I will stick to classy,old,good toolchains, I won't use LINARO ones because I don't see any point in doing so
*removed slowdown in downloading files when device is locked
*forced fast AC charging (device charges faster via USB)
*only available iosched is SIO
*440mb of ram - I won't fight for every mb 440 or 445 doesn't really make big difference and it is huge value already, but I will try to expand it in future
*20% UV for LCD
*changed readahead for optimal sd performance
*LOAD_FREQ (4*HZ+61) avoids loadavg Moire
*nonblocking for entropy tweaks and some entropy changes
*debugging diabled (gpu too)
*frandom
FREQUENCIES (cpu,gpu,voltage)
1520mhz - 253,3mhz - 1375000mV
1320mhz - 220mhz - 1300000mV
1096mhz - 219,2mhz - 1200000mV
800mhz - 200mhz - 1075000mV
400mhz - 200mhz - 1000000mV
TO DO:
*rework voltages, they suck as for now
*rework cpu frequencies - I don;t like removing 200mhz but was needed to fix SODs
*rework lowmemory killer and ram management
*find and add good scheduler or tweak on of existing ones and delete rest of them
*add BLN (backlight notification)
*tweak touchscreen - I have to find optiomal values
*other stuff
I now there are many things to do yet, but kernel is really fine to use for now. I have limited time because I have my finals ATM. cheeres and peace
There is a problem with uploading... so I will post it here for a while:
usa
http://www71.zippyshare.com/v/88900215/file.html
intl
http://www48.zippyshare.com/v/79863885/file.html
FAQ
Q: How to install it?
A:Simply apply via CWM
Q: What does not work?
A:You tell me, should be exact as "stock" cm10.1 JackpotClavin's kernel
Q: What is O3 optimization?
A:
Mevordel said:
O3 is a compiler flag telling it to optimize for speed. Other options include O2 and O1, which do less optimization, and Osize, which tries to generate the smallest output. In stock, the graphics drivers were compiled with Osize. He changed it to O3.
Click to expand...
Click to collapse
-Well said
CHANGELOG
Is there a download link?
Link? Can't wait to try on pacman's latest!
Sent from my Galaxy Nexus using xda app-developers app
Karim.younus said:
Is there a download link?
Click to expand...
Click to collapse
jeffc83 said:
Link? Can't wait to try on pacman's latest!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
What is it with people and NOT READING? I believe the OP states that download links will come later. In other words not available now! Read, people! Read!
Sent from my XT862
Yup I can't understand it too
If you really want to flash something please read the opening post.
I hope I will post kernels today.
But nice enthusiasm though
Wysyłane z mojego Nexus S za pomocą Tapatalk 2
Short answer/opinion:
Voltages should be higher to support more unlucky devices (like mine), we can undervolt next; overvolting kernel default values instead of UV to reach stability is not safe imho.
Frequencies like: 200, 400, 800, 1200, 1500, aren't good? GPU, asaik should be: 200, 200, 200, 220, 250, no float.
And about SoD (maybe can help): I'm currenty using untouched jackpot's kernel with range 100~1200 (stock voltages); SoD appear rarely, but not "real SoD", if I push some hw button for some seconds the device turns alive. I experienced real SoDs immediately after undervolt all the freqs. This make me think that is not a low frequency problem.
Where did you cherry pick BFS from? I haven't been able to find the 3.0.X patch for BFS so I've never added it
Sent from my HTC Sensation using xda app-developers app
Download links in OP
zardak said:
Short answer/opinion:
Voltages should be higher to support more unlucky devices (like mine), we can undervolt next; overvolting kernel default values instead of UV to reach stability is not safe imho.
Frequencies like: 200, 400, 800, 1200, 1500, aren't good? GPU, asaik should be: 200, 200, 200, 220, 250, no float.
And about SoD (maybe can help): I'm currenty using untouched jackpot's kernel with range 100~1200 (stock voltages); SoD appear rarely, but not "real SoD", if I push some hw button for some seconds the device turns alive. I experienced real SoDs immediately after undervolt all the freqs. This make me think that is not a low frequency problem.
Click to expand...
Click to collapse
I changed voltages a little bit, will uptade soon in OP
I will rework frequencies sometime but I don't think 800-1200 is good idea
no, I know what is the reason for SOD, partially
android1234567 said:
Where did you cherry pick BFS from? I haven't been able to find the 3.0.X patch for BFS so I've never added it
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
I think mathkid95 repo
Maybe I uv'ed too much, check if it work for you ppl
Overclocking on sultan kernel always causes my device to reboot randomly or sod.
Any chance of this being different with your kernel?
Sent from my YP-G70 using xda app-developers app
Nothing stops you from trying
Hard to say if we don't know the reason of such bad behavior.
Wysyłane z mojego Nexus S za pomocą Tapatalk 2
BTW, KOala, your kernel doesn't have fastcharge. The commit you cherry-picked modified the mach-herring.c file, not mach-venturi.c; to fix this, manually copy the changes made in mach-herring.c to mach-venturi.c.
Higgs_Boson said:
What is it with people and NOT READING? I believe the OP states that download links will come later. In other words not available now! Read, people! Read!
Sent from my XT862
Click to expand...
Click to collapse
My apology...I only had a short break and a small screen to boot. Chill.
Sent from my YP-G70 using xda app-developers app
saw that already but thank you
I will fix it too
Wysyłane z mojego Nexus S za pomocą Tapatalk 2
Yay glad you brought it back ^^ or should say upgraded he he. Love this kernel!
So far on pac rom working best. Getting a lot of free memory even with multitasking!
Better than sultan kernel so far as well as far as speed smoothness and other problems.
Sent from my YP-G70 using xda premium
Pity...
Also giving me random reboots when overclocking more than standard.
Sent from my YP-G70 using xda app-developers app
My device underolts well so I may choosed too low voltages. I will update kernel probably today. Maybe it is just your device
Wysyłane z mojego Nexus S za pomocą Tapatalk 2
ratyfu said:
Pity...
Also giving me random reboots when overclocking more than standard.
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
Overclocking is not a universal feature; not all devices can handle the same overclock. Your device's overclocking abilities will be exactly the same between my kernel and KOala's kernel (unless our GPU frequencies are different from one another).
Does this kernel contain android1234567's WiFi fix?
Sent from my YP-G70 using xda premium
Friends,
Help me, I am using Xperia Ray.
How to Configure CPU Control in my Ray.?
Is there any way to improve performance of phone using CPU control?
Which is best min Frequency and max Frequency for xperia Ray.
Thanks.
aravin said:
Friends,
Help me, I am using Xperia Ray.
How to Configure CPU Control in my Ray.?
Is there any way to improve performance of phone using CPU control?
Which is best min Frequency and max Frequency for xperia Ray.
Thanks.
Click to expand...
Click to collapse
hope u r already rooted..if not follow any rooting procedures in general tips and tricks forum..(one click root method was very successful in my wT19i,thanks to senior Nabeel :good
after rooting u can download setCPU or no frills cpu from playstore, to control ur CPU speeed..
very very detailed and easy descriptions regarding cpu control are already in those pages..so just check it out and dont wait simply till some experts reply to ur post..:good:
:good:
aravin said:
Friends,
Help me, I am using Xperia Ray.
How to Configure CPU Control in my Ray.?
Is there any way to improve performance of phone using CPU control?
Which is best min Frequency and max Frequency for xperia Ray.
Thanks.
Click to expand...
Click to collapse
I use Xperia Ray and
For rooting:
I used eRoot, you literally connect your phone to PC and pres ROOT
Before that you have to enable USB Debugging in Settings->Developer Options.
After four green circles get checked your phone is rooted
For CPU control:
I installed Custom ROM and there i have "no frills CPU control" installed. I don't recommend you to do overclocking or do anything with your processor because you can brick and mess up your device if you don't know what you'r doing.
Also, man already answered, you can download do frills from playstore
If i helped you, please don't forget to hit Thanks button
Cheers
Google link for eRoot, I'm still not able to post links
If you want to decrease lag raise the minimum frequency. Overclocking does absolutely nothing except making your phone hotter and processor life shorter
Sent from my LT18i using xda premium
tangosierra_ said:
If you want to decrease lag raise the minimum frequency. Overclocking does absolutely nothing except making your phone hotter and processor life shorter
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
With overclock you are not 100% right with 1 ghz oc on ics some times i get scroll lagg and apps opens slower and with 1,4 ghz oc phone works perfect.
Ainster said:
With overclock you are not 100% right with 1 ghz oc on ics some times i get scroll lagg and apps opens slower and with 1,4 ghz oc phone works perfect.
Click to expand...
Click to collapse
The benefits of overclocking are still minimal.
Sent from my LT18i using xda premium
if you just want to reduce the lag , use SeederEntropy app , It's AWESOME !
*requires Root Permissions*
Hope It'll help
aravin said:
Friends,
Help me, I am using Xperia Ray.
How to Configure CPU Control in my Ray.?
Is there any way to improve performance of phone using CPU control?
Which is best min Frequency and max Frequency for xperia Ray.
Thanks.
Click to expand...
Click to collapse
CpU control lets u control ur phone cpu and its frequency and volatage.
increasing max freq. will increase speed but consume more battery.and risk of burning is also noteable.
so set it after doing research on ur cpu and itr limit.
and u need to be rooted and have a kernel to accses cpu
im using stock kernel. Can i overclock without flash custom kernel?
V4mpjr3 said:
im using stock kernel. Can i overclock without flash custom kernel?
Click to expand...
Click to collapse
No.
Sent from my Xperia Arc S using xda premium