before i made the update i did a backup of the root with voodoo ota rootkeeper.
now after the update rootkeeper the box "root permission granted" is unchecked and i dont know how to change it.
i tried to delete the "su backup" but it didnt work.it is written that the su backup is deleted but when i restart the rootkeeper it is still there.
i found a thread which could help me :http://forum.xda-developers.com/showthread.php?t=1911261
(For those with 'partial' root after JB update - regain root).
with adb the command su works.
but the problem is when i start adb shell there is no device listed anymore.i still can browse through the directory of my asus prime but i cannot push files because then there is no device error.
when i quit adb and restart adb to run "adb devices" the device is listed but after i start adb shell there isnt any device listed anymore.
cheers
lumpilumpe
Don't delete the SU backup - that is all you have with root at the moment.
It isn't clear which steps you can do.
Push files to device (in any state, /data/local/tmp for example?)
SU within ADB shell?
remount /system within ADB?
Seems like you can make it, if you work out the right things to do...
thx for the fast reply. yeah su within adb.
step 1:adb shell
step 2:su
step 3: yeaaaaahh... i found my mistake!!!
thx again for your answer , i solved it now.
for everyone who has the same problem.follow the steps from these link :http://forum.xda-developers.com/showthread.php?t=1911261
i made a mistake before .
last question:what can i do next time to prepare myself a better way?
cheers
lumpilumpe
Q
UOTE=tshoulihane;34224306]Don't delete the SU backup - that is all you have with root at the moment.
It isn't clear which steps you can do.
Push files to device (in any state, /data/local/tmp for example?)
SU within ADB shell?
remount /system within ADB?
Seems like you can make it, if you work out the right things to do...[/QUOTE]
lumpilumpe said:
before i made the update i did a backup of the root with voodoo ota rootkeeper.
now after the update rootkeeper the box "root permission granted" is unchecked and i dont know how to change it.
i tried to delete the "su backup" but it didnt work.it is written that the su backup is deleted but when i restart the rootkeeper it is still there.
i found a thread which could help me :http://forum.xda-developers.com/showthread.php?t=1911261
(For those with 'partial' root after JB update - regain root).
with adb the command su works.
but the problem is when i start adb shell there is no device listed anymore.i still can browse through the directory of my asus prime but i cannot push files because then there is no device error.
when i quit adb and restart adb to run "adb devices" the device is listed but after i start adb shell there isnt any device listed anymore.
cheers
lumpilumpe
Click to expand...
Click to collapse
I like SuperSU instead of SuperUser.
Check to see if you still are rooted by installing another app that requires root. (SuperSU will do).
What I did was simply have SuperSU forget OTA Rootkeeper, then close OTA Rootkeeper completely meaning ending it completely and then opening it again and having SuperSU ask if I want to grant it SU permissions again.
I don't remember if SuperUser lets you forget an app so it asks you again or not.
Related
Okay, so I've noticed that this rooting method is a little unconventional. It works through a compromised Fota.pkg which has setuid on /system/bin/sh as root. This is not a very safe, as any application that runs sh will gain root access to your system. Scary... :S Anyway, in order to fix this we need to take a few steps.
It is important that you do these in order, otherwise you may lose root access
Install a proper SU with whitelist
1. Download http://bit.ly/aWgALL
2. Unzip the system folder.
3.
Code:
adb shell mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
adb push system/bin/su /sdcard/su
adb push system/app/Superuser.apk /sdcard/Superuser.apk
adb shell dd if=/sdcard/su of=/system/bin/su
adb shell dd if=/sdcard/Superuser.apk of=/system/app/Superuser.apk
adb shell chmod 6777 /system/bin/su
adb shell chmod 644 /system/app/Superuser.apk
4. Reboot your phone.
Fix sh to not setuid to root
1.
Code:
adb shell mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
adb shell chmod 0755 /system/bin/sh
Properly install busybox
1. Here, it's easier to look for the busybox installer app from the market and then install from there. If you did everything correctly, then after you hit install in the busybox app a prompt will come up asking you to allow the app to have root. Hit allow.
You're done!
this might be stupid questions, i know. But where should I unzip the system folder that mentioned to? And where to type those command?
chai_archer said:
this might be stupid questions, i know. But where should I unzip the system folder that mentioned to? And where to type those command?
Click to expand...
Click to collapse
If you followed the root guide you can put it in the step 4 folder.
Then hit windows key + r and in the box type CMD
A console window comes up.
in the console window type cd <path.to.your.step.4.folder>
then go from there.
zephyrix said:
Properly install busybox
1. Here, it's easier to look for the busybox app from the market and then install from there. If you did everything correctly, then after you hit install in the busybox app a prompt will come up asking you to allow the app to have root. Hit allow.
You're done!
Click to expand...
Click to collapse
i did everything as mentioned but it dint ask me for permission wen installin busybox is it because i had it installed sometime before runnin this guide?
yea i knw im a noob after all
bcool15 said:
i did everything as mentioned but it dint ask me for permission wen installin busybox is it because i had it installed sometime before runnin this guide?
yea i knw im a noob after all
Click to expand...
Click to collapse
yep.
if you check the superuser app it should already be there.
zephyrix said:
yep.
if you check the superuser app it should already be there.
Click to expand...
Click to collapse
all i see in superuser app is titanium backup pro
that's strange. does busybox report that it's installed?
zephyrix said:
that's strange. does busybox report that it's installed?
Click to expand...
Click to collapse
nope it doesnt
well i tried all this and now i lost my root. Did EXACTLY what's written. Anyway to reverse this and get my root back?
unknown13x said:
well i tried all this and now i lost my root. Did EXACTLY what's written. Anyway to reverse this and get my root back?
Click to expand...
Click to collapse
i think i lost mine too but to reactivate there is command or prolly i just messed up summmwhere n redid my whole root with v3 update
bcool15 said:
i think i lost mine too but to reactivate there is command or prolly i just messed up summmwhere n redid my whole root with v3 update
Click to expand...
Click to collapse
use "su" to get root access... allow when the Superuser Whitelist notification pops up.
it worked for me....followed the steps, after i downloaded the busybox app i opened it and a box popped up "Superuser Request", it had discription of the busybox app and then asked whether to allow or deny the request....i then checked the superuser app and was able to see the busybox app in thr....
can anyone confirm if these steps were added in the new root method? please
bcool15 said:
can anyone confirm if these steps were added in the new root method? please
Click to expand...
Click to collapse
I'd like to know that too, I mean, in 2v2 do we still need to do the whitelist thing?
root in adb
I tried this on the last root (ROOT_F2v2) and I lost root in adb..
I still had regular root
I had to revert it back with "chmod 6777 /system/bin/sh" to get adb do admin task again.. (I use adb regularly)
Does anyone know how to secure sh and still have root in adb?
Regards.
th4r said:
I tried this on the last root (ROOT_F2v2) and I lost root in adb..
I still had regular root
I had to revert it back with "chmod 6777 /system/bin/sh" to get adb do admin task again.. (I use adb regularly)
Does anyone know how to secure sh and still have root in adb?
Regards.
Click to expand...
Click to collapse
adb shell su
And after superuser popup add "unknown application" to the whitelist.
Chillest said:
adb shell su
And after superuser popup add "unknown application" to the whitelist.
Click to expand...
Click to collapse
Yes that give me root in adb shell but adb is still running unprivileged.
I believe it's because we can't patch the bootloader yet, so we still have getprop ro.secure 1. :'(
I did a little script to toggle setuid on /system/bin/sh when I'm doing root stuff from adb
Sent from my rooted X10i
I have installed this to protect the system.
The only concern I have is i cannot run for example my cleaning script.
If i type into cmd ;
"adb shell su" it comes up with a # and freezes. If i type in
"adb shell<enter>
su" it works fine. and i can paste all the commands in line by line.
If i do either in a bat or cmd file it crashes. How do i run scripts as su
Here are the answers....
bcool15 said:
can anyone confirm if these steps were added in the new root method? please
Click to expand...
Click to collapse
No they were not. The reason is that many of the rooting steps rely on a setuid "sh"
gfgodoy said:
I'd like to know that too, I mean, in 2v2 do we still need to do the whitelist thing?
Click to expand...
Click to collapse
Yes
Chillest said:
adb shell su
And after superuser popup add "unknown application" to the whitelist.
Click to expand...
Click to collapse
So what? The uid for the shell application launched after invoking "adb shell" is not going to match any of the installed applications anyways. The thing is that Superuser.apk installs a mechanism by which the user (human) can detect when an application is requesting root access. Based upon the nature of the application you may or may not want to grant root access. That is the whole point.
th4r said:
Yes that give me root in adb shell but adb is still running unprivileged.
I believe it's because we can't patch the bootloader yet, so we still have getprop ro.secure 1. :'(
I did a little script to toggle setuid on /system/bin/sh when I'm doing root stuff from adb
Sent from my rooted X10i
Click to expand...
Click to collapse
Oh yeah? I just use "su" whenever I want root access... and I didnt have to write any scripts to enable/disable it.
k1ckn1ck said:
I have installed this to protect the system.
The only concern I have is i cannot run for example my cleaning script.
If i type into cmd ;
"adb shell su" it comes up with a # and freezes. If i type in
"adb shell<enter>
su" it works fine. and i can paste all the commands in line by line.
If i do either in a bat or cmd file it crashes. How do i run scripts as su
Click to expand...
Click to collapse
Then you shouldn't be rooting in the first place. Take my advice, lay off the rooting. It definitely doesn't have anything that will be of advantage to you.
j4mm3r said:
Then you shouldn't be rooting in the first place. Take my advice, lay off the rooting. It definitely doesn't have anything that will be of advantage to you.
Click to expand...
Click to collapse
easy now, it's a fair question, would be nice to be able to run cleaning scripts on a protected system. no need to be a prick
in answer to the question though, once the batch starts adb shell, it won't continue till that process ends
I did some googling for some comandline tools that might allow sending keystrokes to a process, but nothing easy appeared, looks like your only option is to use a linux friendly notepad to create some shell scripts you can execute from the sdcard. i.e. on device
su
chmod 755 /sdcard/myscript.sh
./sdcard/myscript.sh
easiest way to do scripts on a secured root IMO
Edit: Im stuck. I cannot root my phone because something is wrong with Superuser.apk, and I can't uninstall superuser because I can't get root. And if I try to install Superuser it just fails because it's already in there. So I have no idea what to do now, I need to return this phone to the Verizon store and I can't get the Superuser app off the phone. Any ideas?
http://ip208-100-42-21.static.xda-developers.com/showthread.php?p=6978379
should work. I did this to upgrade from market the version that came with the lag fix from the market.
I couldn't get that to work..
What happens when you adb shell into the device, and do 'su'. If you get a # prompt, you have root.
You don't need Superuser.apk to have root access. You can always run the rage.bin process to get a root shell. From there you should be able to at least rename Superuser.apk to something like Superuser.apk.old.
Yeah, I can type su and get the # prompt. Is this what runs the rage.bin:
adb shell
cd /data/local/tmp
chmod 0755 rage.bin
./rage.bin
?
Sorry, Im new to the ADB process. How would I go about renaming? I wanted to use something like root explorer to find the file and remove or rename it, but I can't get any root apps to work. Obviously because Superuser doesnt function I don't get permission prompt. Root explorer either crashes or says to restart to get the permission prompt.
GHII said:
Yeah, I can type su and get the # prompt. Is this what runs the rage.bin:
adb shell
cd /data/local/tmp
chmod 0755 rage.bin
./rage.bin
?
Sorry, Im new to the ADB process. How would I go about renaming? I wanted to use something like root explorer to find the file and remove or rename it, but I can't get any root apps to work. Obviously because Superuser doesnt function I don't get permission prompt. Root explorer either crashes or says to restart to get the permission prompt.
Click to expand...
Click to collapse
If you can do "su" and get the # prompt, forget about rage.bin. You have root access, it's just Superuser that's screwed up.
go to your # prompt and do the following
cd /system/app
mv Superuser.apk Superuser.apk.old
See if that gets you any further as far as being able to re-install
I appreciate your help more than you know, really, thanks. I tried that and I get 'failed on 'Superuser.apk' - No such file or directory. Can it be installed anywhere else, like in a temporary directory?
When I try adb install Superuser.apk it starts to then says:
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
So I tried what you just mentioned but using the above directory:
#
cd /data/local/tmp
mv Superuser.apk Superuser.apk.old
and it didn't give me any errors, just the #..but when I went and tried to install Superuser again I got the same error as above.
Ok, new update! I remember someone asking me to do ls in adb shell to get a list of what's in there..so, I did that with /system/app and I got a list...at the very bottom of the list was superuser.apk..this whole time i've been messing with Superuser.apk, a capital S. So, I used your mv method on the lower case version, seemed to work..but when I did adb install Superuser.apk I get Failure [INSTALL_FAILED_UPDATE_INCOMPATIBLE]
Didn't work but I feel Im getting closer
Wow, i just happen to look and the superuser app was no longer showing up in my apps..problem solved. Thanks again for everyone's help in this thread and others.
ok guys so i wanted to post this because ive been sitting here for two days trying to regain root on my prime after doing a factory reset to speed it up! It was pretty damn slow so i bit the bullet and its much faster now but unfortunately no root I tried to use the debugfs root method and it wasnt working multiple errors and still no root. Now a few things first i had used voodoo in the past to protect root, it sorta worked, voodoo stated my device had root but no program could actually get root. Also like i said the debugfs method was a no go and a few other options i tried. Im currently locked and rooted with full permissions. These are not my instructions but they solved my problem way too easily so i had to share. I found this over in the tf300 forums at this thread Nooktablets tf300 rooting thread i dont know if this will work if u have never rooted or never once backed up.. But i was having problems with errors in other methods so try it out and let me know how it works..
directions:
1) Download the unsure su from here and put it somewhere on your C Drive. It will be used in the following push step (Assuming windows) (This is a WIDE OPEN su without any controls). (sparky root i believe?)
https://www.dropbox.com/sh/jcpilpgoeta516e/tCB-Ep-3YQ
2) start a CMD window and logon to adb
3) su -
4) verify you have root:
id
uid=0(root) gid=0(root)........
If you don't you can try these instead of 'su':
"/system/su-backup" or "/system/su_backup"
5) remount system as RW:
mount -o remount,rw /dev/block/mmcblk0p1 /system
6) make a backup of current su just in case in adb
cat /system/bin/su > /system/bin/su1
7) open a new CMD window and push the su binary from step 1 to the sdcard using the path from where ever you put it.
adb push c:\<some path>\su /sdcard/
8) Then copy it to /system/bin from the adb session where you su'd.
cat /sdcard/su > /system/bin/su
9) Change permissions for SU
chmod 6755 /system/bin/su
10) download superuser (NOT SUPERSU) from play store if you do not have it already.
11) have superuser upgrade the su binary. It may fail to remount system as RO. Just rerun the update in superuser and it will work the 2nd time. You don't need to remount system as RO manually since superuser update of SU will do that for you.
12) congrats. your now rerooted.
13) remove the backup after you know your OKAY.
mount -o remount,rw /dev/block/mmcblk0p1 /system
rm /system/bin/su1
mount -o remount,ro /dev/block/mmcblk0p1 /system
franky_402 said:
ok guys so i wanted to post this because ive been sitting here for two days trying to regain root on my prime after doing a factory reset to speed it up! It was pretty damn slow so i bit the bullet and its much faster now but unfortunately no root I tried to use the debugfs root method and it wasnt working multiple errors and still no root. Now a few things first i had used voodoo in the past to protect root, it sorta worked, voodoo stated my device had root but no program could actually get root. Also like i said the debugfs method was a no go and a few other options i tried. Im currently locked and rooted with full permissions. These are not my instructions but they solved my problem way too easily so i had to share. I found this over in the tf300 forums at this thread Nooktablets tf300 rooting thread i dont know if this will work if u have never rooted or never once backed up.. But i was having problems with errors in other methods so try it out and let me know how it works..
directions:
1) Download the unsure su from here and put it somewhere on your C Drive. It will be used in the following push step (Assuming windows) (This is a WIDE OPEN su without any controls). (sparky root i believe?)
https://www.dropbox.com/sh/jcpilpgoeta516e/tCB-Ep-3YQ
2) start a CMD window and logon to adb
3) su -
4) verify you have root:
id
uid=0(root) gid=0(root)........
If you don't you can try these instead of 'su':
"/system/su-backup" or "/system/su_backup"
5) remount system as RW:
mount -o remount,rw /dev/block/mmcblk0p1 /system
6) make a backup of current su just in case in adb
cat /system/bin/su > /system/bin/su1
7) open a new CMD window and push the su binary from step 1 to the sdcard using the path from where ever you put it.
adb push c:\<some path>\su /sdcard/
8) Then copy it to /system/bin from the adb session where you su'd.
cat /sdcard/su > /system/bin/su
9) Change permissions for SU
chmod 6755 /system/bin/su
10) download superuser (NOT SUPERSU) from play store if you do not have it already.
11) have superuser upgrade the su binary. It may fail to remount system as RO. Just rerun the update in superuser and it will work the 2nd time. You don't need to remount system as RO manually since superuser update of SU will do that for you.
12) congrats. your now rerooted.
13) remove the backup after you know your OKAY.
mount -o remount,rw /dev/block/mmcblk0p1 /system
rm /system/bin/su1
mount -o remount,ro /dev/block/mmcblk0p1 /system
Click to expand...
Click to collapse
This procedure worked for my TF201 with partial root after updating to 4.1.1. The only issue was step 11, the forced update of Superuser's su binary. The message was “Making sure new su works..." but the result after several minutes was still "Waiting....". Should I rerun the forced su update? Despite this Vodoo OTA Rootkeeper did restore root without problem and Root Checker says thumbs up.
At this point, is there anything to do like switching to SuperSU that would make the root more future-proof?
Thank You! I have been trying to regain root after jellybean ota on my Motorola Atrix HD for the last week and a half. Finally success . I cant thank you enough!
After I upgraded ota to jb. Su ceased to work entirely the binary would not update. and all root apps were no longer working. i did have a su-backup but was getting nowhere in my attempts to use the app. i was only able to invoke a root prompt. i looked all over the internet not just the xda forums. i tried mattigriffs root restore. i typed into a command prompt for several hours each day.. all i ever got was a root prompt in adb shell. no prompt on the phone emulator. this is the only page that has worked for me. i noticed right away that the code was written differently than any other that i tried. also the su used is different(it is described as wide open) any way because of this i felt that others who were /are in the same boat. no root. may be able to get root back. I hope that answers your question. have a great day! .
You should be able to switch to a different root app. Never used this method but I have switched from superuser to supersu. Install superuser and run the binary update. Should tell you your binary is out of date with the name of the binary for the other root app. Update and reboot, then go back to superuser and check the binary update again. If it says it's up to date, uninstall the old root app and move superuser to /system/app. Reboot and you're good to go!
Sent from my Atrix HD MAXX
i think i tried that. istalling and uninstalling and subdstituting su and supersu. was not updating no matter what. also my adb push was not working so i copy pasted the su with my laptop while in adb shell. also updated su binary while in shell. it was already a system app from my previous attempts. anyway im good now
any one get it to work with no root/first time root? my prime wouldnt update via ota once on ics so i had to use the sd card update method to update. and from then on i never rooted again i then updated to jb and until 2 days ago i wanted to reroot but noticed there was no root method for jb yet. voodo root keeper just has super user app installed and ./system supports root protection both checked.
I'm in the same situation as fcortes626, I had to upgrade via sdcard method, and voodoo root keeper didn't maintain the root. I can't find any su backup in my filesystem.
I wonder if we can downgrade using the sd card update then root and go on from there........?
Sent from my SGH-T999 using xda app-developers app
HOW TO HAVE ROOT AFTER JELLY BEAN OTA"Only for those who did OTARootKeeper process and still have no root."
For those who did OTARootKeeper process, and is not able to have root working properly.
I did all this after breaking my head for a few hours. Many are in this same situation that I was, hope i can help all.
Process:
. Once you have made the process of Backup and Temp-UnRoot in OTARootKeeper
. Once you have upgraded to the OTA Jelly Bean and restored root in OTARootKeeper
. And still having problems with root access.
. Open the PlayStore and search for SuperUser
. You will see that an update is available. Just update the SuperUser app and open it.
. On the main screen of SuperUser is showing the version of the binary that you have early installed via OTARootKeeper (ver. 3.0.3.2)
. Will be available an update of the binary (ver. 3.1.1). Just update the binary version.
. Once updated the root binaries, the root will work normally, giving permissions to all applications that you need.
OBS:
If you have problems with SuperUser, after do the process above, install the SuperSU app via PlayStore, and use it for root permissions.
I hope that I helped! If so, just thanks! :good:
This is not development selection..
Please move to general area..
Sent from my XT910 using Tapatalk 2
Please change the name of the thread (system version and leak) and move it to general section
Hit the thx button if i helped ya in anyways
That's a bit sad, but it still does not help me. I've definitely protected root with Voodoo, as it still says I have root, but when I click "temp unroot" it does nothing. Might Superuser from Koush do something wrong?
EDIT: Huh, I've found the way around. If you have backed up root with OTA Rootkeeper like me, but cannot restore it follow these steps:
1. Download Android Terminal from Play Store.
2. Open it, type in "cd /system/usr/we-want-root", confirm with Enter.
3. Type "./su-backup", confirm with Enter.
4. You should now see different prompt - ending with "#" instead of "$".
5. Type "mount -o remount,rw /system", confirm with Enter
6. Type "cp su-backup /system/xbin/su", confirm with Enter
Congratulations, you are now rooted. Beware, this method works only if you have backed up you root before OTA! If something is wrong after second step type "ls -l" and you should see "rwsr-s--- su-backup" - those "s" are is important, they mean you are able to get root access.
Here's my situation...I had 2 rezounds...One perfectly OK, rooted and Titanium backed up, but my kids poured milk into it...yaay. The 2nd rezound which was my wife's seems to have something physically wrong with it where I can't connect to it with fastboot (but adb works ok when the phone is fully booted), which means I can't dev unlock it, or apply most of the root methods out there...
So I decided to try some other things...
I downloaded the Cydia Impactor...
Drop Su didn't work
but,
start telnetd as root on port 22 did work!
so I then went in and remounted /system as RW
and copied su to /system/bin and the Superuser.apk to /bin/apps.
I then performed a echo ro.kernel.qemu=1 >/data/local.prop.
Now when I reboot, I get the root shell if I adb in to my phone...
But, on the screen only the status bar at the top comes up and if I try to swipe down, I get
"Unfortunately, System UI has stopped".
After this, I went into adb shell and noticed the su was gone from /system/bin...So this time I pushed it to /system/xbin, changed to root owner and chmod'd it to 06755..I removed the local.prop since I think that was causing the problem with the launch screen.
After rebooting, the Rezound had deleteed the su again, but the launcher comes up OK.
So I'm thinking, maybe I need to name the su something else...nope that won't work.
I guess for now I can be happy I can get temp root...
1. Run Cydia Impactor and select start telnetd as root on port 22.
2. copy su to /system/xbin and chmod 06755 /system/xbin/su
3. Run Titanium backup, and allow SU access.
works until phone reboot when su is removed by something.
Any ideas for next steps anyone?
Thanks,
Scott