all the sudden i have no display it is blank everything else works meaning i can call my phone it rings even though i have no display if i slide my finger to unlock the ring i can answer all calls i change the display today along with the digitizer but still have no display what else could be bad
Maybe the motherboard? I'd take it to the Sprint store (or whoever your carrier is) for repairs.
1iwilly said:
all the sudden i have no display it is blank everything else works meaning i can call my phone it rings even though i have no display if i slide my finger to unlock the ring i can answer all calls i change the display today along with the digitizer but still have no display what else could be bad
Click to expand...
Click to collapse
If its not the hardware, it can be the kernel problem. Do you see anything in your bootloader (vol down + power while phone is off)?
mnomaanw said:
If its not the hardware, it can be the kernel problem. Do you see anything in your bootloader (vol down + power while phone is off)?
Click to expand...
Click to collapse
no it is all black only the bottom light are on is the there a way i can get into it using sdk even thought display is black.??? thanks
Remove and reinsert the battery then try to boot into bootloader and see If screen lights up. You might have fastboot turned on.
mnomaanw said:
Remove and reinsert the battery then try to boot into bootloader and see If screen lights up. You might have fastboot turned on.
Click to expand...
Click to collapse
no no go still black screen
1iwilly said:
no no go still black screen
Click to expand...
Click to collapse
hmmm..then maybe... what coal said
coal686 said:
Maybe the motherboard? I'd take it to the Sprint store (or whoever your carrier is) for repairs.
Click to expand...
Click to collapse
can't do that the phone is flash to metropcs from my donor phone
1iwilly said:
can't do that the phone is flash to metropcs from my donor phone
Click to expand...
Click to collapse
I've heard the cables in the 3d are very tiny. Maybe the cable that connects the motherboard to the display is broken or has a broken pin.
coal686 said:
I've heard the cables in the 3d are very tiny. Maybe the cable that connects the motherboard to the display is broken or has a broken pin.
Click to expand...
Click to collapse
somebody said maybe a kernel gone bad is there a way using sdk that i can get into the phone to do a wipe and install a fresh different rom.??
what command would i need if possible??
1iwilly said:
somebody said maybe a kernel gone bad is there a way using sdk that i can get into the phone to do a wipe and install a fresh different rom.??
what command would i need if possible??
Click to expand...
Click to collapse
You could always try going back to stock. If you are s-on, bout the phone into fastboot, connect to pc, relock the bootloader and run the ruu.exe. You'll have to HTC unlock again. If you're s-off, just run the ruu. You'll keep s-off, but be completely stock otherwise.
coal686 said:
You could always try going back to stock. If you are s-on, bout the phone into fastboot, connect to pc, relock the bootloader and run the ruu.exe. You'll have to HTC unlock again. If you're s-off, just run the ruu. You'll keep s-off, but be completely stock otherwise.
Click to expand...
Click to collapse
i'm s-off but if the screen is black how do i put it in fastboot.?? with sdk.?? if so what commands do i need to run to do what you are saying i do have a copy of the original stock rom and i do want to stay s-off
If you don't have a light at all(even the "black" one), I suggest to take your phone to service because if that is kernel problem, you would have a bit of light. If that is not possible, open your phone and check if there are any irregularities. If you dropped your phone, cable could detach from motherboard. It is not hard to disassemble..you can find youtube video.
Sent from my shooteru using xda premium
1iwilly said:
i'm s-off but if the screen is black how do i put it in fastboot.?? with sdk.?? if so what commands do i need to run to do what you are saying i do have a copy of the original stock rom and i do want to stay s-off
Click to expand...
Click to collapse
You can use adb. With the phone hooked up to the computer, at the command prompt, type adb reboot bootloader.
1iwilly said:
i change the display today along with the digitizer but still have no display what else could be bad
Click to expand...
Click to collapse
PROleev said:
If you dropped your phone, cable could detach from motherboard. It is not hard to disassemble..you can find youtube video.
Sent from my shooteru using xda premium
Click to expand...
Click to collapse
Unless he's made a habit of dropping his phone in the exact same way, I very much doubt that would help.
If it were a kernel issue your boot loader would have worked all the same (boot loader loads the kernel and is independent of it)
As it's not the screen itself and not a software problem it's probably either the GPU being fried or some other piece of electronics between it and the screen connector ( maybe even the connector itself). As far as I know the "fix" for this is replacing the motherboard or the entire phone. As you've opened the phone I'm going to assume you're not under warranty in which case either repair option is quite expensive... a new PCB is generally over 50% of the phone's value and will most often prevent you from ever unlocking the phone via htcdev;
Related
So hard to type. I'm using a mhl cable. Screen is black. Works on tv tho. Just trying to wipe phone before sprint gets it. Root etc. Any help?
just run the RUU on it, once thats done if your S-Off, just get your phone into hboot, press power that should get you into fastboot, plug usb in, issue command to turn S-ON.
Honestly I would just take it in, they can't deny insurance on rooted phones. They might fight with you on, but you are paying for insurance, they have to fix it.
Saw your on HBoot 1.50, doesn't matter what you do they can tell, it'll say Re-locked in the hboot menu.
I don't care about root and unlocked they already ordered me a new phone I just want my other stuff off. Just looking for an easy way.
eyeisdasteve said:
I don't care about root and unlocked they already ordered me a new phone I just want my other stuff off. Just looking for an easy way.
Click to expand...
Click to collapse
RUU then
10 chars
Try a magnet.
Sent from my PG86100 using XDA App
Use adb to wipe your phone. Take your sdcard out before it sending it to Assurion.
I doubt they will even look at the internal memory before they completely wipe and RUU and replace the screen. they won't care.
it's a hardware problem anyway, nothing memory related
if you are worried about your personal info being stolen, if they do steal your personal info off the phone they will have some big legal troubles
z50king said:
I doubt they will even look at the internal memory before they completely wipe and RUU and replace the screen. they won't care.
it's a hardware problem anyway, nothing memory related
if you are worried about your personal info being stolen, if they do steal your personal info off the phone they will have some big legal troubles
Click to expand...
Click to collapse
Right but proving they did would be difficult.
So got my new phone. Now its time to root and such. Haha.
Chuki82 said:
just run the RUU on it, once thats done if your S-Off, just get your phone into hboot, press power that should get you into fastboot, plug usb in, issue command to turn S-ON.
Honestly I would just take it in, they can't deny insurance on rooted phones. They might fight with you on, but you are paying for insurance, they have to fix it.
Saw your on HBoot 1.50, doesn't matter what you do they can tell, it'll say Re-locked in the hboot menu.
Click to expand...
Click to collapse
I unrooted my old one and still show s-off... How do you issue a command to turn s-on?
Sent from my PG86100 using xda premium
OK so I did the HTCDev unlock perfectly fine, then flashed the Leedroid rom (using cwm) and the kernel (using fastboot), it loaded up and was working great until I made a phone call! Within about 2 minutes of the call it cut out completely (had about 70-75% battery), and I mean it literally just completely shut off and now it won't turn back on. I have done battery pulls, tried a different battery, plugging into charger (but light doesn't even come on!). What is going on?
Sounds like leedroid is your problem
Sent from my PG86100 using XDA
fpineda101 said:
Sounds like leedroid is your problem
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Yeah I guessed that problem is I can't boot the phone at all, so can't get into fastboot or recovery to get rid of it
Atomix86 said:
Yeah I guessed that problem is I can't boot the phone at all, so can't get into fastboot or recovery to get rid of it
Click to expand...
Click to collapse
Weird... Have u tried vol down+power?
What you could try, take the SD card out and use either another phone or sd adaptor and place on it the PG86IMG.zip file (you can find this in one of the root threads)..........try the volume-down, power button method to see if it boots into recovery.........if this works, then it will read the .zip file.
---------- Post added at 08:34 AM ---------- Previous post was at 08:33 AM ----------
of course, after placing the .zip file on the card, put back into your phone before trying to boot into recovery.
wikdNoob said:
Weird... Have u tried vol down+power?
Click to expand...
Click to collapse
Yes it was one of the first things I tried.
ycats said:
What you could try, take the SD card out and use either another phone or sd adaptor and place on it the PG86IMG.zip file (you can find this in one of the root threads)..........try the volume-down, power button method to see if it boots into recovery.........if this works, then it will read the .zip file.
of course, after placing the .zip file on the card, put back into your phone before trying to boot into recovery.
Click to expand...
Click to collapse
I wish I could do that but I can't boot using any button combination at all
the volume-down/power button method, hold them both down simultaneously for awhile................in the past I've had to do this for about a minute to get it to work.............you may have tried that already but doesn't hurt to try again.
ycats said:
the volume-down/power button method, hold them both down simultaneously for awhile................in the past I've had to do this for about a minute to get it to work.............you may have tried that already but doesn't hurt to try again.
Click to expand...
Click to collapse
Counted two whole minutes while holding them down, nothing :/ beginning to regret buying this now.
that sucks.........did you try finding that .zip file, put on the sdcard, then hold down those buttons for awhile? bTW, when you plug in the charger, do you get a red light?
ycats said:
that sucks.........did you try finding that .zip file, put on the sdcard, then hold down those buttons for awhile? bTW, when you plug in the charger, do you get a red light?
Click to expand...
Click to collapse
Yes I tried placing the file on the memory card, no dice. And no I don't get a red light when plugging into charger. It's as if the ROM or whatever the issue is, has completely destroyed it.
Atomix86 said:
Counted two whole minutes while holding them down, nothing :/ beginning to regret buying this now.
Click to expand...
Click to collapse
Sounds like a hardware issue. How long did you have it before unlocking it? Did you even make sure that the phone ran a few days before screwing around with installing a ROM and Kernel?
Would you buy a new car and not break it in before replacing the factory parts with aftermarket parts?
tgruendler said:
Sounds like a hardware issue. How long did you have it before unlocking it? Did you even make sure that the phone ran a few days before screwing around with installing a ROM and Kernel?
Would you buy a new car and not break it in before replacing the factory parts with aftermarket parts?
Click to expand...
Click to collapse
Used it for about an hour as stock, but that is irrelevant. I wasn't "screwing around" either, I have flashed many phones in my time and always follow the guides provided to completion. The car analogy isn't anything like this, rooting or installing a ROM wouldn't cause a hardware issue any different to a stock ROM would.
Atomix86 said:
The car analogy isn't anything like this, rooting or installing a ROM wouldn't cause a hardware issue any different to a stock ROM would.
Click to expand...
Click to collapse
That is halfway correct. But you said in your original post that you installed a kernel. The kernel is what runs the hardware. If the kernel is set to run the phone out of spec, this could cause hardware issues.
Did you change the max CPU? What about undervolting?
tgruendler said:
That is halfway correct. But you said in your original post that you installed a kernel. The kernel is what runs the hardware. If the kernel is set to run the phone out of spec, this could cause hardware issues.
Click to expand...
Click to collapse
The kernel was the leedroid one, but I thought it only started running that if you booted regularly eg not into fastboot?
Atomix86 said:
The kernel was the leedroid one, but I thought it only started running that if you booted regularly eg not into fastboot?
Click to expand...
Click to collapse
If you installed the ROM and Kernel, you were running it when you made the phone call and the phone went dead. Leeroids kernel, even though he is an excellent developer and I am not saying anything bad about him or his work, changes cpu and undervolting settings which could cause issues with the phone. I am not saying that that is what caused your issue, but it could have been your phone not playing nice with the kernel.
only other thing I would try is leave the battery out for an hour and try again...........but you've probably been down that road.
Yep... sounds to me like a hardware failure. Shiat! :-/
tgruendler said:
If you installed the ROM and Kernel, you were running it when you made the phone call and the phone went dead. Leeroids kernel, even though he is an excellent developer and I am not saying anything bad about him or his work, changes cpu and undervolting settings which could cause issues with the phone. I am not saying that that is what caused your issue, but it could have been your phone not playing nice with the kernel.
Click to expand...
Click to collapse
That is very true, I was just hoping that the kernel "boot up" so to speak could be avoided by opening fastboot and flashing a stock rom back. But as you stated perhaps the undervolting has messed something up. Thank you very much for your insight and help.
ycats said:
only other thing I would try is leave the battery out for an hour and try again...........but you've probably been down that road.
Click to expand...
Click to collapse
Funnily enough this is what i'm going to do now, having a quick google search shows a few people suggesting to do this (im not quite sure what it does, something to do with the phone dispersing the charge it has inside it or some such?), so thanks for the suggestion!
Jakedude2011 said:
Yep... sounds to me like a hardware failure. Shiat! :-/
Click to expand...
Click to collapse
Indeed
ycats said:
only other thing I would try is leave the battery out for an hour and try again...........but you've probably been down that road.
Click to expand...
Click to collapse
Holy crap, this actually worked! Now I just have to find a way of removing that nasty kernel xD
AWESOME! I believe the stock kernel would be in that .zip file if it flashed from recovery.
Ok I was having trouble getting S-off, it was getting stuck at the first reboot and was saying waiting for device, well i fianall got to where it said to do the wire trick, and well, now the usb port isnt working on the phone! I can't reflash anything, i can get to fastboot, but my computer doesn't detect it! I'm Screwed! Please help!
Db0y505 said:
Ok I was having trouble getting S-off, it was getting stuck at the first reboot and was saying waiting for device, well i fianall got to where it said to do the wire trick, and well, now the usb port isnt working on the phone! I can't reflash anything, i can get to fastboot, but my computer doesn't detect it! I'm Screwed! Please help!
Click to expand...
Click to collapse
Make sure you close all terminal windows and reset the computer. I was having this problem too and simply restarting the computer and phone seemed to solve their inability to talk to each other.
Also, I was having the same problem of it hanging on "waiting for device" before I even got to do the wire trick. Oddly enough, it seemed to be related to the kernel I was using (SebastianFMs OC based off the latest ICS kernel). As soon as I tried using an earlier ICS kernel before I tried again, all the sudden it was detecting my phone correctly and would go on to the wire trick part immediately.
a.mcdear said:
Make sure you close all terminal windows and reset the computer. I was having this problem too and simply restarting the computer and phone seemed to solve their inability to talk to each other.
Also, I was having the same problem of it hanging on "waiting for device" before I even got to do the wire trick. Oddly enough, it seemed to be related to the kernel I was using (SebastianFMs OC based off the latest ICS kernel). As soon as I tried using an earlier ICS kernel before I tried again, all the sudden it was detecting my phone correctly and would go on to the wire trick part immediately.
Click to expand...
Click to collapse
I've tried this already. still nothing:/
It won't even charge. I've tried 3 different computers, usb cords and still nothing, I'm trying to reflash my Boot.img and my recovery.img through the PH98IMG.zip method, but I can't seem to get either of them working. I'm running GB, and all the PH98IMG.zip files i've found are all for ICS.
Db0y505 said:
I've tried this already. still nothing:/
It won't even charge. I've tried 3 different computers, usb cords and still nothing, I'm trying to reflash my Boot.img and my recovery.img through the PH98IMG.zip method, but I can't seem to get either of them working. I'm running GB, and all the PH98IMG.zip files i've found are all for ICS.
Click to expand...
Click to collapse
Real quick, when you say it won't charge. Do you mean if you plug it into a wall it won't charge, even when turned off?
Pull out the battery entirely, connect the phone to the computer, and turn on the phone. You should be able to get to HBOOT via USB power. Does this work?
Think this is the one you want
View attachment PH98IMG.zip
sindroidx said:
Real quick, when you say it won't charge. Do you mean if you plug it into a wall it won't charge, even when turned off?
Click to expand...
Click to collapse
Correct, the LED light won't go on.
a.mcdear said:
Pull out the battery entirely, connect the phone to the computer, and turn on the phone. You should be able to get to HBOOT via USB power. Does this work?
Click to expand...
Click to collapse
Nope, this doesn't work.
Khayos said:
Think this is the one you want
View attachment 1021148
Click to expand...
Click to collapse
I'm going to try this now.
Db0y505 said:
I've tried this already. still nothing:/
It won't even charge. I've tried 3 different computers, usb cords and still nothing, I'm trying to reflash my Boot.img and my recovery.img through the PH98IMG.zip method, but I can't seem to get either of them working. I'm running GB, and all the PH98IMG.zip files i've found are all for ICS.
Click to expand...
Click to collapse
It's going to be ok, just take a deep breath and calm down. If you're stressed out, take a break and put your feet up. Panic and stress are the only thing that will brick a rezound. Anything else can be fixed, besides of course hardware failure, and that's not your issue.
Khayos said:
Think this is the one you want
View attachment 1021148
Click to expand...
Click to collapse
Do i put my boot.img in here, or do i just flash it as is?
CharliesTheMan said:
It's going to be ok, just take a deep breath and calm down. If you're stressed out, take a break and put your feet up. Panic and stress are the only thing that will brick a rezound. Anything else can be fixed, besides of course hardware failure, and that's not your issue.
Click to expand...
Click to collapse
I'm not really stressed out, I mean i switched back my Droid 4 while the Rezound is down so i have a working phone, I just want to get my rezound up an running again...
What do you think could be causing this if it's not hardware failure?
Db0y505 said:
I'm not really stressed out, I mean i switched back my Droid 4 while the Rezound is down so i have a working phone, I just want to get my rezound up an running again...
Well what do you think could be causing this?
Click to expand...
Click to collapse
Honestly I'm concerned that your phone doesn't see power or respond to USB at all anymore. Is it possible that you've broken the little tab inside the port on your phone, or is it possible that some piece of debris is shorting out the contacts in there?
you say its still possible to get to HBOOT, which means if you can remove your SDCARD and put a PH98IMG.zip file on it with the correct boot.img you can get it booting again - but I'm concerned that the USB port is damaged and therefore the phone may be useless once the battery is depleted.
a.mcdear said:
you say its still possible to get to HBOOT, which means if you can remove your SDCARD and put a PH98IMG.zip file on it with the correct boot.img you can get it booting again
Click to expand...
Click to collapse
Technically you can, it's just a huge pain in the ass, I've done it before. You have to pull the battery out at like a 45 degree angle but make sure there's enough pressure on it so it still makes contact, then slide out the sdcard with your fingernail and get the sdcard. Place the battery back in, get a card reader and put it on there, then reverse the process.
a.mcdear said:
Honestly I'm concerned that your phone doesn't see power or respond to USB at all anymore. Is it possible that you've broken the little tab inside the port on your phone, or is it possible that some piece of debris is shorting out the contacts in there?
you say its still possible to get to HBOOT, which means if you can remove your SDCARD and put a PH98IMG.zip file on it with the correct boot.img you can get it booting again - but I'm concerned that the USB port is damaged and therefore the phone may be useless once the battery is depleted.
Click to expand...
Click to collapse
I just looked at usb port, and it's perfect, i blew some compressed air so it's clean.
And yeah i can get into hboot, but im having a problem flashing a PH98IMG.zip, it keeps saying "Parsing" when it finds the file, and it doesn't flash the boot.img
And I'm not worried about the battery depleting, I have a Thunder Bolt to charge the battery. But the fact that my pc won't detect my phone is worrying me.
Db0y505 said:
I just looked at usb port, and it's perfect, i blew some compressed air so it's clean.
And yeah i can get into hboot, but im having a problem flashing a PH98IMG.zip, it keeps saying "Parsing" when it finds the file, and it doesn't flash the boot.img
And I'm not worried about the battery depleting, I have a Thunder Bolt to charge the battery. But the fact that my pc won't detect my phone is worrying me.
Click to expand...
Click to collapse
Yeah it sounds like something is definitely wrong with the phone... has me wondering if the USB issue and the hanging on "parsing" are related by a common malfunction or failure of the device.
Either that, or the PH98IMG.zip file you have on there is bad? I suppose that is entirely possible too... Or if somehow the installed kernel became corrupt, I could see the phone behaving the way it is.
I would try re-downloading another kernel as a PH98IMG.zip file, putting it on the SDCARD and trying all over again with a completely new download. Don't use the one you've been using, just to eliminate a bad PH98IMG.zip as the possible culprit.
a.mcdear said:
Yeah it sounds like something is definitely wrong with the phone... has me wondering if the USB issue and the hanging on "parsing" are related by a common malfunction or failure of the device.
Either that, or the PH98IMG.zip file you have on there is bad? I suppose that is entirely possible too... Or if somehow the installed kernel became corrupt, I could see the phone behaving the way it is.
I would try re-downloading another kernel as a PH98IMG.zip file, putting it on the SDCARD and trying all over again with a completely new download. Don't use the one you've been using, just to eliminate a bad PH98IMG.zip as the possible culprit.
Click to expand...
Click to collapse
Same problem trying to flash the new kernal.
I think something is went wrong the phone's hardware.
DO you think i could make an Asurin claim on it? It already has a broken screen.
Db0y505 said:
Same problem trying to flash the new kernal.
I think something is went wrong the phone's hardware.
DO you think i could make an Asurin claim on it? It already has a broken screen.
Click to expand...
Click to collapse
If it has a broken usb/charging port, hell yes I'd definitely try for an exchange first on the basis that a critical part failed. If they give you grief over the damaged screen then definitely do an insurance claim on it, assuming you got insurance on it..
a.mcdear said:
If it has a broken usb/charging port, hell yes I'd definitely try for an exchange first on the basis that a critical part failed. If they give you grief over the damaged screen then definitely do an insurance claim on it, assuming you got insurance on it..
Click to expand...
Click to collapse
Alright, I'll try for an exchange, But would they get mad because it boots to the green arrow screen?
Db0y505 said:
Alright, I'll try for an exchange, But would they get mad because it boots to the green arrow screen?
Click to expand...
Click to collapse
oh yeah, its stuck on the juopunutbear screen? that could make it a little obvious then huh? I suppose that is a bit of a risk - perhaps just an insurance claim would be best in your case. I exchanged my last unlocked/rooted Rezound, but the screen was broken and wouldn't turn on anymore. no problems for me though...
a.mcdear said:
oh yeah, its stuck on the juopunutbear screen? that could make it a little obvious then huh? I suppose that is a bit of a risk - perhaps just an insurance claim would be best in your case. I exchanged my last unlocked/rooted Rezound, but the screen was broken and wouldn't turn on anymore. no problems for me though...
Click to expand...
Click to collapse
Yeah lol. Well what I suppose i could try it, or just run the battery out so it won't turn on and they can't charge it.
Well thanks for helping out, Ill post back what happens when i get off the phone.
Ok so Ive searched for help at phandroid, but, I think I might need some XDA help !
I repair phones at CPR loveland colorado.
Routine digitizer replacement on a Rezound. Turn the phone on. Everything looks great. HTC splash screen comes on nice and bright and then cuts out.
The phone is still on and booted into the Android OS. Its just that the LCD is out.
Replaced LCD and i got the same thing. Even tried changing digitizers. Nothing. LCD only stays on for 5 seconds after booting or in the Bootloader.
If I go into the bootloader, the LCD stays on. If i go into recovery it turns off again!
I have ADB/Fastboot set up. But when i use the command "adb devices" while in fastboot usb mode, nothing is shown. I have the latest HTC drivers and HTC SYNC turned off.
I've tried using the leaked ICS RUU through the sd card. It loaded the img and completed, but, still no LCD after boot.
After no luck, I unlocked the bootloader and flashed Amonra. Still, when i go into recovery, the LCD cuts out again. So I relocked the phone.
Phone is currently TAMPERED/RELOCKED.
If anyone has any ideas, please, throw them at me.
Thanks for reading my post guys. Again, any help would be great. Thanks for providing a great community here at XDA!
Synergy-7 said:
Ok so Ive searched for help at phandroid, but, I think I might need some XDA help !
I repair phones at CPR loveland colorado.
Routine digitizer replacement on a Rezound. Turn the phone on. Everything looks great. HTC splash screen comes on nice and bright and then cuts out.
The phone is still on and booted into the Android OS. Its just that the LCD is out.
Replaced LCD and i got the same thing. Even tried changing digitizers. Nothing. LCD only stays on for 5 seconds after booting or in the Bootloader.
If I go into the bootloader, the LCD stays on. If i go into recovery it turns off again!
I have ADB/Fastboot set up. But when i use the command "adb devices" while in fastboot usb mode, nothing is shown. I have the latest HTC drivers and HTC SYNC turned off.
I've tried using the leaked ICS RUU through the sd card. It loaded the img and completed, but, still no LCD after boot.
After no luck, I unlocked the bootloader and flashed Amonra. Still, when i go into recovery, the LCD cuts out again. So I relocked the phone.
Phone is currently TAMPERED/RELOCKED.
If anyone has any ideas, please, throw them at me.
Thanks for reading my post guys. Again, any help would be great. Thanks for providing a great community here at XDA!
Click to expand...
Click to collapse
just thinking out loud...would a messed up/blocked proximity sensor be involved. At what point in the boot process or even in recovery does the sensor become active?
Looks like bad hardware
Sent from my ADR6425LVW using Tapatalk 2
Yeah there is a problem that probably can't be easily fixed. The proximity sensor is a good thought tho might want to check that out
they proximity sensor should only kill the screen when an application such as the dialer calls upon it to do so. seeing as the screen works when you are booting and fails after boot, have you considered reflashing the phone back to factory?
Or doing a factory reset if u can wing it from hboot
Sent from my ADR6425LVW using xda premium
Kidney Poker said:
Or doing a factory reset if u can wing it from hboot
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Would an exe RUU process be able to run with his screen situation? Con could really provide some good info but I bothered him on gtalk all night the last two nights working on the venom stuff so I'm not messaging him right now lol.
Does the screen work in recovery?
con247 said:
Does the screen work in recovery?
Click to expand...
Click to collapse
Does not work in recovery.
I would love to flash a gingerbread ruu on it. Official.Signed. Any idea where I can find that?
Synergy-7 said:
Does not work in recovery.
I would love to flash a gingerbread ruu on it. Official.Signed. Any idea where I can find that?
Click to expand...
Click to collapse
I think these should do.
http://www.filefactory.com/f/c2e320ee1d5c7886/
Hi everyone just a few hours ago my phone was still working, it was stock firmare no root). Once I removed the back plate I turn it On and it was working perfectly but once I put it on the other one a black one start with the boot loop. I din't damage any cable. I hope some can help me. thanks in advance.
So you took the back off the phone? Backing which is not supposed to come off ? I think you've done something to your phone very few of us here could help you with.
craighwk said:
So you took the back off the phone? Backing which is not supposed to come off ? I think you've done something to your phone very few of us here could help you with.
Click to expand...
Click to collapse
This happened to me with the HTC One X but because it was the international model I used the RUU and it was fixed.
Gospelfrances said:
This happened to me with the HTC One X but because it was the international model I used the RUU and it was fixed.
Click to expand...
Click to collapse
I don't get what you're saying. If you're talking about the One X, you're in the wrong forum.
Sent from my HTC One using xda premium
jonathan3579 said:
I don't get what you're saying. If you're talking about the One X, you're in the wrong forum.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
I said that happened with my past phone, now I have the new HTC one which is the one that I have this issue
Gospelfrances said:
I said that happened with my past phone, now I have the new HTC one which is the one that I have this issue
Click to expand...
Click to collapse
so you changed the housing of the htc one to black one??
htc fan89 said:
so you changed the housing of the htc one to black one??
Click to expand...
Click to collapse
Yes, actually when I took it off, I turn on the phone to check if there was any damage and it was working perfectly but one I put it into the new housing I turned on it start the boot loop.
Gospelfrances said:
Yes, actually when I took it off, I turn on the phone to check if there was any damage and it was working perfectly but one I put it into the new housing I turned on it start the boot loop.
Click to expand...
Click to collapse
Maybe something related to the wires, can you boot into bootloader? then from there you can do a factory restore...otherwise you need to flash a ruu
htc fan89 said:
Maybe something related to the wires, can you boot into bootloader? then from there you can do a factory restore...otherwise you need to flash a ruu
Click to expand...
Click to collapse
I had been reading some threads and I think im going to need the RUU becuase the phone was intact I was very careful not to damage it
wait!! how did you remove the back, did you buy it in the us on tmoble?
qzan7 said:
wait!! how did you remove the back, did you buy it in the us on tmoble?
Click to expand...
Click to collapse
I used this method to open it :
"To open the HTC One i used an iSesamo tool and a long plastic spudger. Start from the top right corner and insert the blade (or any other thin tool) in between the white plastic back cover. Then take one side of the volume button out (preferably the +) and then insert the plastic spudger in between the back cover and the mother board. "
http://www.youtube.com/watch?v=xTkedw4_27k
This is how it looks.
Did you get it?
If you can get into the bootloader try a factory restore.
Sorry to get off topic , but to be honest im shocked you were able to pull that off and make it look that good. Did you have to re-glue anything? Most of us are under the impression that you basically have to destroy the phone to take it apart. Did the black plastic on the side come with the black back plate. More info please. Good luck, i hope you are able to get it working again. If its bootlooping its most likely a soft brick that is fixable. Is the power button maybe not in correctly sticking down?
adezd00 said:
If you can get into the bootloader try a factory restore.
Sorry to get off topic , but to be honest im shocked you were able to pull that off and make it look that good. Did you have to re-glue anything? Most of us are under the impression that you basically have to destroy the phone to take it apart. Did the black plastic on the side come with the black back plate. More info please. Good luck, i hope you are able to get it working again. If its bootlooping its most likely a soft brick that is fixable. Is the power button maybe not in correctly sticking down?
Click to expand...
Click to collapse
Yes the black plastic on the side does comes with the back plate and well I just followed the instructions that were on the video description.
I did not have to re-glue anything actually it was just like a snap case when I put it on the new back plate. I already tried a factory reset but still is bootlooping, I already checked and the power botton is not sticking down, I think is a soft brick but Im just going to wait for the RUU.
Try fastboot erase cache and reflash twrp.
Sent from my HTC One using xda app-developers app
isaster1 said:
Try fastboot erase cache and reflash twrp.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Can I use an International RUU or the AT&T ones?
Simply no
Gospelfrances said:
Can I use an International RUU or the AT&T ones?
Click to expand...
Click to collapse
You will have to wait for the tmobile ruu to be released. You can attempt s-off and change your cid ,it you do that you can run any ruu for the htc one. Unfortunately, i don't think you will be able to do that if cant get it to boot into hboot or recovery.
adezd00 said:
You will have to wait for the tmobile ruu to be released. You can attempt s-off and change your cid ,it you do that you can run any ruu for the htc one. Unfortunately, i don't think you will be able to do that if cant get it to boot into hboot or recovery.
Click to expand...
Click to collapse
Well I'm going to wait for the tmobile ruu
Gospelfrances said:
Well I'm going to wait for the tmobile ruu
Click to expand...
Click to collapse
Can you power the phone completely off? Otherwise the bootloop will run the battery completely down, which is not good for LiPoly.
stevedebi said:
Can you power the phone completely off? Otherwise the bootloop will run the battery completely down, which is not good for LiPoly.
Click to expand...
Click to collapse
Ah yes i can turn it off, do you know if when is off can I charge it?