Please could someone post me a proper link of PIT file and Original Stock ROM for:
GT-I9300
SSN - I9300GSMH
FCC ID - A3LGTI9300A
Also tried PIT file GT-I9300_mx_20120329.pit but keeps getting stuck.
THANK YOU
DEEPDOSHI
Why did you do a pit flash ? Search this thread , you will get the required files
Sent from my GT-I9300 with a BIG
Hans Kruger said:
Why did you do a pit flash ? Search this thread , you will get the required files
Sent from my GT-I9300 with a BIG
Click to expand...
Click to collapse
Hi thanx for replying back
I have to do a pit flash because whenever I want to install even original stock rom I can't it says PIT missing
And then shows FAIL in Red box...
I also tried mx.pit
Still didn't go on...
there's no need for a pit file for flashing roms just make sure to untick the repartition option befor flashing.
Sammobile.com for PIT .
PIT is the easy noob root to bricking a phone .
jje
Did you solve the problem?
I have the same device and the same problem.
Have found a link for pit file?
And for ROM?
Best regards
Fernando from Brazil
deepdoshi said:
Please could someone post me a proper link of PIT file and Original Stock ROM for:
GT-I9300
SSN - I9300GSMH
FCC ID - A3LGTI9300A
Also tried PIT file GT-I9300_mx_20120329.pit but keeps getting stuck.
THANK YOU
DEEPDOSHI
Click to expand...
Click to collapse
Related
i tried to install ICS..i am getting the yellow box..and added ..then i hav put the PDA file..the phone goes to download mode but not to recovery mode..wen i press recovery it freezes at galaxy S2..then i started the process in ODIN..the program fails..the phone does not start..wat should i do
Use the search function
First things first.
1) Check the sticker on the phone chassis under the battery. What does it say ?
2) What exactly did you flash ? If you want help, you're going to have to be a little bit (a lot actually) less vague.
MistahBungle said:
First things first.
1) Check the sticker on the phone chassis under the battery. What does it say ?
it says
model : GT : I9100G
SSN : I9100GGSMH
Rated : ...
FCC ID
2) What exactly did you flash ? If you want help, you're going to have to be a little bit (a lot actually) less vague.
Click to expand...
Click to collapse
i hav put the tar file in PDA
No PIT file
flashed auto and reboot
Stitch! said:
Use the search function
Click to expand...
Click to collapse
how do i contact u??i hav create this id noww...i am at beginner level..help me
Can you get to download mode when you push Power+Home+Volume down?
fxa5209 said:
Can you get to download mode when you push Power+Home+Volume down?
Click to expand...
Click to collapse
i can go to download mode..in recovery mode it freezes
Did you use the tar file that matches your Baseband version?
What was the file called, as in...what ROM did you flash?
Sent from a Galaxy S 2 far away.
fxa5209 said:
Did you use the tar file that matches your Baseband version?
Click to expand...
Click to collapse
how do i find now???i dont know my base version..just downloaded a file with I9100 firmware and tries it
MistahBungle said:
First things first.
1) Check the sticker on the phone chassis under the battery. What does it say ?
2) What exactly did you flash ? If you want help, you're going to have to be a little bit (a lot actually) less vague.
Click to expand...
Click to collapse
i switched off the phone
i put the phone in download mode
i download odin v1.85
and I9100PXXLPH_I9100PO2ULP4_I9100PXXLPC_HOME.tar
i started odin
the message came added once i connected the USB
the process started and finished in seconds
operation failed
then the phone freezes at GT I9100G galaxy S2
It goes to download mode but not to recovery mode..
truly saying : i dont know what is kernel ..wen i saw the video the method was easy and tried it
i did not use pit file
Monki said:
What was the file called, as in...what ROM did you flash?
Sent from a Galaxy S 2 far away.
Click to expand...
Click to collapse
I9100PXXLPH_I9100PO2ULP4_I9100PXXLPC_HOME.tar thisfile i used
praveentpk247 said:
it says
model : GT : I9100G
SSN : I9100GGSMH
Rated : ...
FCC ID
i hav put the tar file in PDA
No PIT file
flashed auto and reboot
Click to expand...
Click to collapse
You have an i9100G. Did you download an I9100G firmware? What did you download? I'm betting you downloaded an I9100 firmware instead of an i9100G one.
If you download an i9100G firmware and try again, it should work.
Try this.
Then if you decide to try installing ICS again, make sure you download one for the i9100G, and not the i9100.
praveentpk247 said:
I9100PXXLPH_I9100PO2ULP4_I9100PXXLPC_HOME.tar thisfile i used
Click to expand...
Click to collapse
Yup, that is a firmware for the i9100P that is O2 branded. See my post above.
By the way, FYI: i9100G is NOT compatible with other i9100 models in respect to firmwares and kernels
praveentpk247 said:
how do i find now???i dont know my base version..just downloaded a file with I9100 firmware and tries it
Click to expand...
Click to collapse
Sorry man, but you should have made some reading before you do this as there are many files with XX_I9100_XX and each belongs to baseband version which is included in the file name which should match your baseband version in settings> about phone.
ctomgee said:
By the way, FYI: i9100G is NOT compatible with other i9100 models in respect to firmwares and kernels
Click to expand...
Click to collapse
after downloading this file ..i should go to download mode and try this in odin v1.85 without pit file ??
praveentpk247 said:
after downloading this file ..i should go to download mode and try this in odin v1.85 without pit file ??
Click to expand...
Click to collapse
Just follow the instructions I linked you to.
fxa5209 said:
Sorry man, but you should have made some reading before you do this as there are many files with XX_I9100_XX and each belongs to baseband version which is included in the file name which should match your baseband version in settings> about phone.
Click to expand...
Click to collapse
Baseband doesn't have anything to do with his situation. He attempted to flash a firmware for the wrong version phone.
guys thx for the help ..i hav to download this file it comes around 340Mb ....Gud night everyone..thx for the replies ...
Hi,
I have a little, maybe silly question, i was reading a thread of Odia, and i just want to understand that if I use .Pit for flashing and tick Re-Partition, do I need to flash a Stock ROM (Im ony using stock roms) that comes with bootloader? or can I get the latest ICS Stock Rom from intratech or sammobile and flash it with the .Pit ?
Resuming;
Will my bootloader get erased in this process?
Will all the system files be erased because of the re-partition? (Like when we create a new partition in Windows and everything that was on HD gets lost forever lol) ??
Thank you in advance ! =D
Danpamio said:
Hi,
I have a little, maybe silly question, i was reading a thread of Odia, and i just want to understand that if I use .Pit for flashing and tick Re-Partition, do I need to flash a Stock ROM (Im ony using stock roms) that comes with bootloader? or can I get the latest ICS Stock Rom from intratech or sammobile and flash it with the .Pit ?
Resuming;
Will my bootloader get erased in this process?
Will all the system files be erased because of the re-partition? (Like when we create a new partition in Windows and everything that was on HD gets lost forever lol) ??
Thank you in advance ! =D
Click to expand...
Click to collapse
No. Never click repartitions or play with pit files. Judging by you not knowing how Odin is spelled, you do not know how to use it
Sent from my GT-P7510 using xda premium
Odia is a user here on xda, but your point is still valid.
kilometers4 said:
No. Never click repartitions or play with pit files. Judging by you not knowing how Odin is spelled, you do not know how to use it
Click to expand...
Click to collapse
Yeah.. i was talking about a thread started by Odia (Xda member) in developers area... I cant post there yet coz im new here in this forum, but i read it very often since i got my SGSII in 2011..
We can't play with .Pit but We should use when phone is bricked and u cant go on recovery mode (only in download mode), that happens when Nand-rw is broken, and thats can only be fixed re-partitioning your phone with .Pit.
Now my question is.. re-partitioning will reset my bootloader so I will have to flash a Rom with one or not..?
Thank you by ur concern anyway ! =D
Ps: Judging is not cool..
Hey, if u got here in this thread and has the same question as I did, i got the answer..
After reading this thread (Guide)
I found that the bootloader is NOT erased when using .Pit and re-partitioning, bootloader is only replaced if u flash a new one using Odin. So there is no need to use .Pit and re-partition with a bootloader at the same time.
If u are new and dont know what .Pit files are or how to use them, read carefully the thread i linked above.
Thank You to everybody who read this post and took a minute thinking about the answer !
I just want to say thank you to this forum for telling me how to root. get super su, cwm, flash kernals install cool jelly bean roms, even transform my m250s to a i9100 and unlock the sim. now here is my questions how do i transform my cellphone back to an skt m250s(korean version) what kind of roms do i need. i didn't make a backup before the transformation to the i9100. any help would be appreciated or any leads on where to go.
Sorry for the Edit:
I want to go from M250S --->I9100 ---> back to M250S(SKT) NOT M250K(Olleh KT) or M250L(LGU+)
If you want to revert back, go to sammobile.com and download a firmware there flash the .tar file using odin
Sent from my GT-I9300 using xda premium
sammobile only has the files for M250K the one i'm looking for is M250S
if you had spent a few minutes searching by typing this:
Samsung ms250s firmware, it would have led you to :
http://www.apkforandroids.com/samsung-m250s-firmware/
Cosmic Blue said:
if you had spent a few minutes searching by typing this:
Samsung ms250s firmware, it would have led you to :
[ururl]
Click to expand...
Click to collapse
i did spend a few minutes searching. and i did find that file. so instead of assuming help would have been more appreciated. i need the pit file. the pit file i found makes my phone into a olleh kt s2. not an skt s2. i also need the csc tar file. at bootup it still says i9100
you need to be a member of this forum
i found the list of stock firmwares for your model
http://gsmsolution.biz/forum/android_os/9613-korean_shw_m250s_galaxy.html
...and all i did was googling it:victory:
dbswjdgh27 said:
I just want to say thank you to this forum for telling me how to root. get super su, cwm, flash kernals install cool jelly bean roms, even transform my m250s to a i9100 and unlock the sim. now here is my questions how do i transform my cellphone back to an skt m250s(korean version) what kind of roms do i need. i didn't make a backup before the transformation to the i9100. any help would be appreciated or any leads on where to go.
Sorry for the Edit:
I want to go from M250S --->I9100 ---> back to M250S(SKT) NOT M250K(Olleh KT) or M250L(LGU+)
Click to expand...
Click to collapse
Hi! I want to know what kind of procedure did you performed about converting M250S to I9100?
Because i have Galaxy S anycall M110s and maybe you can help me to convert it to i9000.
Thank you!
sent using "Creed 3.5+merruk kernel"
davidroid03 said:
Hi! I want to know what kind of procedure did you performed about converting M250S to I9100?
Because i have Galaxy S anycall M110s and maybe you can help me to convert it to i9000.
Thank you!
sent using "Creed 3.5+merruk kernel"
Click to expand...
Click to collapse
I used the following.
remember to take out the spaces inbetween
wecanfixyour mobile.com/2012/02/sch-m 250s-succesf ully-debrand-to-i9100.html
dbswjdgh27 said:
i did spend a few minutes searching. and i did find that file. so instead of assuming help would have been more appreciated. i need the pit file. the pit file i found makes my phone into a olleh kt s2. not an skt s2. i also need the csc tar file. at bootup it still says i9100
Click to expand...
Click to collapse
I'm having the same issue. After I flash M250S firmware, it boots saying i9100 and stuck there Did you find a solution?
Kasun Anuradha said:
I'm having the same issue. After I flash M250S firmware, it boots saying i9100 and stuck there Did you find a solution?
Click to expand...
Click to collapse
this seem to be a one way trip. i also have a M250S that was converted to i9100 and now im fighting to get it back to M250S. i have the M250K pit file and the i9100 pit file but nothing i do will get the phone to flash via odin back to M250S. maybe i have to use RIFF or MEDUSA box to get it back to normal
I am a noob using a sgs2(international version) running CM9 stable and for certain reasons I want to restore it to the state i got it, i already used the Triangle Away app and removed the triangle and reset the counter and i also understand that flashing the stock rom doesn't increase the count but I don't know about the matter related to restoring to stock I watched a couple of videos and I am confused in some cases they are using 3 or more files in the procedure, like in Odin they have a file for PDA, Kernel, Csc likewise and some are just talking about using only the PDA file, so could someone explain what is happening?
It would be greatly appreciated if someone could give me a link to a unbranded US or UK stock gingerbread 2.3.6 (i cant understand what to select from the other forums because I can't understand files named KHJS_LHDG ..... Etc ) and a way to use that rom with Odin to go back to perfect out of the box situation.
Sent from my GT-I9100 using xda app-developers app
Status : Solved
Solution : Read every thread below there ain't much.
Oh god!!! sorry for posting in the general section I did it carelessly please could the moderator move the question to the q&a section.. Sorry again..
Edit : Thanks for moving it moderator.
Sent from my GT-I9100 using xda app-developers app
there are 2 formats for the stock rom. 1 .rar archive with all CODE MODEM KERNEL CSC as tar.md5 files compressed in a .rar archive.. and the other is the single .tar.md5 file that inside have all in one (kernel, modem...).
if you flash the single tar.md5 it will replace your entire ROM including kernel & modem.
if you flash the multiple file inside the .rar you must put the files you unzipped in their respective slots. be careful with that. I think for this method is needed also a PIT file but I'm not sure.
I always flash the single .tar.md5 file because it's easier
Sent from my GT-I9100G using xda app-developers app
Thanks a bunch that cleared up many of my doubts, so that's it people whoever is confused and reading this, I am perfectly satisfied.
Stock firmware flashing after reseting the counter does remove all traces of root and sammobile gives all the stock firmware needed for your phone. Just be careful enough to select the right version for your model and region and also if present your carrier brand.
Using GT - I9100
I thank those who give helpful comments
exactly buddy
Sent from my GT-I9100G using xda app-developers app
CODE MODEM KERNEL CSC
Click to expand...
Click to collapse
PIT
Bootloader
Phone
Code
CSC
that's the right list.
if you flash the single tar.md5 it will replace your entire ROM including kernel & modem
Click to expand...
Click to collapse
No. One tar.md5 file means only CODE, so it won't replace your modem. Kernel of course, but not modem.
Ive flashed a few stock roms and SU icon is still there.Whether Samsung would knock back warranty because of that I dont know.
theunderling said:
Ive flashed a few stock roms and SU icon is still there.Whether Samsung would knock back warranty because of that I dont know.
Click to expand...
Click to collapse
Then you didn't wipe properly.
Be sure to wipe /data, /system & /cache from your custom recovery before flashing stock firmware to be sure. Just a factory reset after flasing probably is enough but why not take advantage of the custom recovery to wipe all and be sure
Sander M said:
Then you didn't wipe properly.
Be sure to wipe /data, /system & /cache from your custom recovery before flashing stock firmware to be sure. Just a factory reset after flasing probably is enough but why not take advantage of the custom recovery to wipe all and be sure
Click to expand...
Click to collapse
Thanks for the info on modem, is it necessary that I do something about it? I haven't touched it yet.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
przemcio510 said:
PIT
Bootloader
Phone
Code
CSC
that's the right list.
No. One tar.md5 file means only CODE, so it won't replace your modem. Kernel of course, but not modem.
Click to expand...
Click to collapse
yes it is the right list but at least all the single tar.md5 files I've downloaded have a modem file inside so that is why I said that those files modifies the modem
Sent from my GT-I9100G using xda app-developers app
crzr said:
yes it is the right list but at least all the single tar.md5 files I've downloaded have a modem file inside so that is why I said that those files modifies the modem
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Please could you tell me the whether Android gingerbread 2.3.6 Australia unbranded version
GT-I9100_XSA_I9100XWKK2_I9100XSAKK1_I9100XXKI4
Contains the modem file,
And will it effect negatively in my region(india)
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
I think that the rom with many files like code modem csc and pit are mostly used to unbrick
And the single md5 required baseband version to flash or otherwise they will not be able to flashed
ankur.co.in said:
I think that the rom with many files like code modem csc and pit are mostly used to unbrick
And the single md5 required baseband version to flash or otherwise they will not be able to flashed
Click to expand...
Click to collapse
Agreed it's what is implied, after all pit files are used to partition out the internal eMMc, i read that people recovered from the eMMc brick on faulty chips by using this.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
Please could you tell me the whether Android gingerbread 2.3.6 Australia unbranded version
GT-I9100_XSA_I9100XWKK2_I9100XSAKK1_I9100XXKI4
Contains the modem file,
And will it effect negatively in my region(india)
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Click to expand...
Click to collapse
No it doesnt contain modem file its just contained 1 .md5 file and it will not effect negatively in ur region
Thanks again people.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
ankur.co.in said:
No it doesnt contain modem file its just contained 1 .md5 file and it will not effect negatively in ur region
Click to expand...
Click to collapse
Thanks, but what I meant was whether the modem package is included within the tar.md5 file since the rest (CSC, Pit, ..) are apparently included.
Hmmm maybe if I try extraction of the tar file could I get my answer? Or will it be complicated jibberish or can I extract it at all?
I plan on Reaming tar.md5 to just tar for extraction.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
For choosing your rom take a look for yourself here;
http://forum.xda-developers.com/showthread.php?t=1075278
But i think that DXKL3 will fit your needs, it is a multi CSC so no need for a specific region (and it is the most recent
2.3.6 listed among the non region specific 2.3.6 roms):
http://skywanker.net/download/downl...9100_THL_I9100DXKL3_I9100OLCKL2_I9100DXKL1.7z
Here is the stock kernel coming with it:
http://skywanker.net/download/download.aspx?link=GT-9100/Kernels/Kernel_I9100DXKL3.7z
Password: [email protected]
For the question about modem, if you open the archive you can see if there is a "modem.bin" inside or not.
Harsher said:
For choosing your rom take a look for yourself here;
http://forum.xda-developers.com/showthread.php?t=1075278
But i think that DXKL3 will fit your needs, it is a multi CSC so no need for a specific region (and it is the most recent
2.3.6 listed among the non region specific 2.3.6 roms):
http://skywanker.net/download/downl...9100_THL_I9100DXKL3_I9100OLCKL2_I9100DXKL1.7z
Here is the stock kernel coming with it:
http://skywanker.net/download/download.aspx?link=GT-9100/Kernels/Kernel_I9100DXKL3.7z
Password: [email protected]
For the question about modem, if you open the archive you can see if there is a "modem.bin" inside or not.
Click to expand...
Click to collapse
Excellent help thank you
Sent from my Galaxy Tab 7.0 Plus
I thank people who write helpful posts, so i expect the same.
You are welcome.
A note about the pit when you have it:
most of the time, you don't have (and should not) tick these boxes
in Odin.
I used a pit once because I though it would repair my filesystem,
and in someway it did, but most of the time in all flashing tutorial the advice
is not using it.
Hi,
Thanks for this post i found it really helpful,i messed up my custom kernel settings if i flash the stock rom will it also reset the kernel settings.
Sorry i post here but i939 doesnt have a forum.
I clearly followed these instructions to update it 4.1 using odin:
http://androidjinn.com/how-to-install-kedma1-android-4-1-1-jelly-bean-on-i939-galaxy-s3.html/2
but it allways fails at modem.bin... i still can enter download mode and try it again but it allways fails the same.
I hope you can help me =)
IE-coRe said:
Sorry i post here but i939 doesnt have a forum.
I clearly followed these instructions to update it 4.1 using odin:
http://androidjinn.com/how-to-install-kedma1-android-4-1-1-jelly-bean-on-i939-galaxy-s3.html/2
but it allways fails at modem.bin... i still can enter download mode and try it again but it allways fails the same.
I hope you can help me =)
Click to expand...
Click to collapse
Not I9300 so as a guess flash a different file .
or do not flash modem .
Use Google search .
Contact the actual forum / post / thread you are using .
jje
JJEgan said:
Not I9300 so as a guess flash a different file .
or do not flash modem .
Use Google search .
Contact the actual forum / post / thread you are using .
jje
Click to expand...
Click to collapse
The instructions are for i939 =)
how can i exclude modem? This is a one file flash...
Googeling doesnt really help. This is a china\taiwan phone so about all i can find is in chinese...
IE-coRe said:
The instructions are for i939 =)
how can i exclude modem? This is a one file flash...
Googeling doesnt really help. This is a china\taiwan phone so about all i can find is in chinese...
Click to expand...
Click to collapse
Well its not a I9300 pointless posting here as i said ask the one that is giving you the firmware .
Any recommendations mods firmware from I9300 may brick your phone .
his is a china\taiwan phone so about all i can find is in chinese. GOOGLE TRANSLATE
AW: i939 Odin fail at modem
I flashed back to the ics firmware, that worked without problems. But that means i am not gonna have jelly bean cuz jelly bean firmware always gives me this error..
Sent from my MT27i using xda app-developers app