[q] get into locked phone? - AT&T Samsung Galaxy Note I717

So I just bought an at&t i717 note off eBay that was run over by a car or something. I pulled the logicboard out and swapped it into my note to test it and its working 100% so far. Problem is the seller had it locked with a pattern and now won't contact me. So I thought I could get the phone into recovery and do a factory reset or something, not even sure that would work.
Now I also can't get into recovery. No matter what I tried. I flashed a stock rom via odin, still nothing. I tried to root the phone and flash CWM and still the same thing....
When I try to enter recovery it goes immediately to the download screen. Any help would be great I need to get this puppy cracked. I'm pretty new to android so it's tough to know what to do.
Thanks :good:

Hold both volume buttons down when trying to get into recovery.

still stuck
Just flashed another stock ATT rom, this one was ICS. Then I flashed cwm recovery and still just goes to the download screen! Getting pissed.
If I wasn't locked out of the phone I could get ROM manager and boot into recovery..
Any help would be great!

Definitely holding both UP and DOWN volume buttons. I've tried multiple times and still same result.

OK I am thinking the volume UP on this logic board is not working...

Adb reboot recovery
Sent from my GT-P6210 using xda premium

MeestersPrime said:
So I just bought an at&t i717 note off eBay that was run over by a car or something. I pulled the logicboard out and swapped it into my note to test it and its working 100% so far. Problem is the seller had it locked with a pattern and now won't contact me. So I thought I could get the phone into recovery and do a factory reset or something, not even sure that would work.
Now I also can't get into recovery. No matter what I tried. I flashed a stock rom via odin, still nothing. I tried to root the phone and flash CWM and still the same thing....
When I try to enter recovery it goes immediately to the download screen. Any help would be great I need to get this puppy cracked. I'm pretty new to android so it's tough to know what to do.
Thanks :good:
Click to expand...
Click to collapse
Yep...."adb reboot recovery" should work fine.
If not, boot into download mode and reflash the stock ROM and recovery via ODIN.
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app

What about not being able to get into the phone to enable USB Debugging?

ANyone have any ideas? ADB is my only hope but there is currently no way to enable usb debugging without getting into settings. Can a ROM be customized so that the USB debugging option is ON by default?
If I can get into this baby then I didn't waste $100 :good:

If you can get into download mode, try using Odin to completely reflash the phone?

brilliantdonkey said:
If you can get into download mode, try using Odin to completely reflash the phone?
Click to expand...
Click to collapse
Nope no good, it doesn't get rid of the lock. Just comes right back to it. I've flashed stock at&t and stock bell rom multiple times.

Are you able to wipe with Odin? I would try that... hope you figure it out man sucks not having a phone
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

crazzysandman said:
Are you able to wipe with Odin? I would try that... hope you figure it out man sucks not having a phone
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure that I can but ill look into it one more time. I'm currently trying to download NOVENADXLJ2 rom, it has a boot to recovery on the power menu. Hoping I can flash it somehow with odin!

Unzip the file. It will have an odin .tar file. Rhat goes into the PDA slot in odin. No checkmarks except reboot.

He got it brother...
He used kies to restore and unlock the screen.....g

MeestersPrime said:
So I just bought an at&t i717 note off eBay that was run over by a car or something. I pulled the logicboard out and swapped it into my note to test it and its working 100% so far. Problem is the seller had it locked with a pattern and now won't contact me. So I thought I could get the phone into recovery and do a factory reset or something, not even sure that would work.
Now I also can't get into recovery. No matter what I tried. I flashed a stock rom via odin, still nothing. I tried to root the phone and flash CWM and still the same thing....
When I try to enter recovery it goes immediately to the download screen. Any help would be great I need to get this puppy cracked. I'm pretty new to android so it's tough to know what to do.
Thanks :good:
Click to expand...
Click to collapse
Here it is again...just in case someone else's having the same issue
Why don't you give this a shot....
If you are willing to unroot and root again, here's what I've been doing to return to stock.
1 - Put phone in "Download Mode" - phone connected to PC
2 - Start Samsung Kies (make sure you have the latest.....)
3 - From Kies, click on tools then "Firmware Upgrade and Initialization"
4 - You will be prompted to enter ESN and model number (it is ok to pull the battery out to get ESN and Model - phone won't die with battery pulled at that point)
5 - And follow the prompts
The process does take some time. I have successfully done this many times with success.
Try it out to see if that might help you.
Glad it worked.

Related

[Q] bricked samsung gt-b5510 (Galaxy Txt)

Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
bdec said:
Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
Click to expand...
Click to collapse
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
shimp208 said:
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
kudos for you my friend, it worked!
have some cookies
__________
/ YAY \
/ IT'S A \
\ COOKIE /
\__________/
sorry if my art sucks
Unable to enter Download Mode
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
caraconan said:
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
Click to expand...
Click to collapse
Are you able to get into recovery mode still? For download mode make sure your holding down the correct key combination to get into download mode. You can also try using a USB Download jig which you can get from here, which when plugged into the phone will force the phone into download mode. As a fair warning the download jig's don't usually work with newer model phones but for a couple bucks it's worth a try. Let me know if you still have questions.
Motherboard dead?
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
jfilippo said:
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
Click to expand...
Click to collapse
If your device can still access download mode and Odin can successfully connect to your device an flash the firmware your device's motherboard is not dead. Try re-flashing the firmware to your device and checking auto-reboot option in Odin this way when the firmware finishes flashing the device will automatically reboot and hopefully power on then.
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
jfilippo said:
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
Click to expand...
Click to collapse
To clarify did you put the firmware in the correct slot in Odin (PDA slot in this case) when flashing? Also double check your flashing the correct firmware for your device, as that could also be part of the problem.
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
jfilippo said:
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
Click to expand...
Click to collapse
You can try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
shimp208 said:
You try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
Click to expand...
Click to collapse
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
jfilippo said:
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
Click to expand...
Click to collapse
With the new COM port being recognized try the procedure again and see if it has any different results.
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
adisawant said:
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Click to expand...
Click to collapse
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
jfilippo said:
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
Click to expand...
Click to collapse
i dont think flashing it will help. Just try to download another firmware and flash it.
anyone can sell samsung galaxy 551 i want to buy please call me 7384388281(india/kolkata)

!HELP! Unroot SCH I545 w/ broken USB port

The USB port for my S4 recently stopped working. I called verizon for a replacement. Unfortunately, I am unable to unroot my S4 because it will not connect to ODIN. I could not find a mobile ODIN app compatible with the sch-i545. Does anybody have any suggestions how I could unroot my device. All and any help is greatly appreciated!!!!
I have TWRP and am running the Jelly "Beans" ROM
Mr Frog said:
The USB port for my S4 recently stopped working. I called verizon for a replacement. Unfortunately, I am unable to unroot my S4 because it will not connect to ODIN. I could not find a mobile ODIN app compatible with the sch-i545. Does anybody have any suggestions how I could unroot my device. All and any help is greatly appreciated!!!!
Click to expand...
Click to collapse
Did you try to do the factory reset?
Dolphlungegrin said:
Did you try to do the factory reset?
Click to expand...
Click to collapse
I don't believe that would work. I am rooted running a custom stock rom. I'll include that in the original post
not sure but maybe triangle away and try this http://www.youtube.com/watch?v=dBPUdazXh6c if you cant clear the bianary counter it will still say modified .. didnt realize mobile odin didnt work with sch-i545
Mr Frog said:
I don't believe that would work. I am rooted running a custom stock rom. I'll include that in the original post
Click to expand...
Click to collapse
What ROM? That will work if you still have access to a reset method inside the UI. If you have a ROM on there you must be running MDK, can't you just wipe the data off the phone with CWM or TWRP? The Root binary should be un-installed when you boot back up. Just delete the SuperSu app and you should be home free.
SO_dank said:
not sure but maybe triangle away and try this http://www.youtube.com/watch?v=dBPUdazXh6c if you cant clear the bianary counter it will still say modified .. didnt realize mobile odin didnt work with sch-i545
Click to expand...
Click to collapse
I have used triangle away successfully and it did reset the counter.
Dolphlungegrin said:
What ROM? That will work if you still have access to a reset method inside the UI. If you have a ROM on there you must be running MDK, can't you just wipe the data off the phone with CWM or TWRP? The Root binary should be un-installed when you boot back up. Just delete the SuperSu app and you should be home free.
Click to expand...
Click to collapse
Please correct me if im wrong or misunderstanding what you are saying but i dont believe that would work. If I boot into TWRP and clear all the data I don't believe there will be anything for the phone to boot into. There wont be a rom for it to boot into and it would still have a custom recovery instead of the stock one.
Mr Frog said:
I have used triangle away successfully and it did reset the counter.
Please correct me if im wrong or misunderstanding what you are saying but i dont believe that would work. If I boot into TWRP and clear all the data I don't believe there will be anything for the phone to boot into. There wont be a rom for it to boot into and it would still have a custom recovery instead of the stock one.
Click to expand...
Click to collapse
After the data wipe you could reinstall the original ROM couldn't you? Long as you have the file on your microsd card. That would probably just reflash your ROM though, it may not erase the binaries. Damn. Well I'm sure there is a way to do it like this. It's just been a while since I've messed around with the TWRP recovery mode.
Do you have cwm on the phone. . If you do your sol. You can't wipe that without an odin to my knowledge. . But if your just rooted.. triangle away. .undo root. Remove su factory reset. . Should be clear. .
Dolphlungegrin said:
After the data wipe you could reinstall the original ROM couldn't you? Long as you have the file on your microsd card. That would probably just reflash your ROM though, it may not erase the binaries. Damn. Well I'm sure there is a way to do it like this. It's just been a while since I've messed around with the TWRP recovery mode.
Click to expand...
Click to collapse
Hey so I'm in a similar boat - I have a Verizon S4 with the ME7 firmware that the usb port will no longer connect and won't charge unless the phone is off (and only when it's plugged in to a computer, not a wall). It was rooted so I followed the instructions above to unroot it.
But here's where I think I'm in trouble - I had loaded the TWRP bootloader before I found out it wouldn't work with the ME7 firmware, and never bothered flashing the phone back (stupid, I know). Is there no way to flash back to stock rom via the SD card? Right now when I go into recovery mode, it just goes to the "Downloading" screen. Does anybody know a way I can get TWRP off?
Sorry hope I'm not thread-jacking but this is the most relevant thread I've found to ask this in.
Sure it's not the cable.. if your in a position where you need to stock odin me7 you need usb.. Make sure it's not the cable although it could be phone usb is screwed due to your phone error.. you have insurance??
bretbretterson said:
Hey so I'm in a similar boat - I have a Verizon S4 with the ME7 firmware that the usb port will no longer connect and won't charge unless the phone is off (and only when it's plugged in to a computer, not a wall). It was rooted so I followed the instructions above to unroot it.
But here's where I think I'm in trouble - I had loaded the TWRP bootloader before I found out it wouldn't work with the ME7 firmware, and never bothered flashing the phone back (stupid, I know). Is there no way to flash back to stock rom via the SD card? Right now when I go into recovery mode, it just goes to the "Downloading" screen. Does anybody know a way I can get TWRP off?
Sorry hope I'm not thread-jacking but this is the most relevant thread I've found to ask this in.
Click to expand...
Click to collapse
The only way I know to solve your problem is to reflash ME7 using ODIN. If you have the ME7 firmware already you can't use the TWRP or CWM recovery partitions at all. With out those operating your stuck using ODIN and your USB port. Have you tried another cable?
Dolphlungegrin said:
The only way I know to solve your problem is to reflash ME7 using ODIN. If you have the ME7 firmware already you can't use the TWRP or CWM recovery partitions at all. With out those operating your stuck using ODIN and your USB port. Have you tried another cable?
Click to expand...
Click to collapse
Yeah I've tried a couple different cables, a couple different pc's, a couple different chargers. It will only charge when it's off, connected to a pc. When turning it on "usb cable connected" flashes up top, even though it's not. When it is connected and turned on and below 15%, it tells you to connect to a power source. I searched this and low and behold, several other s4 owners are having the same issue. It started happening two nights ago after I didn't get the phone on a charger before it died, then I charged it overnight - next morning it wouldn't start up. I don't think it has anything to do with having the twrp bootloader though, because it had been on there a couple weeks and restarted more than once with no issues.
If anyone knows how to fix the usb thing, I've got...lets say a $50 reward up for grabs. Not much but it's all I can afford to not void my warranty.
bretbretterson said:
Yeah I've tried a couple different cables, a couple different pc's, a couple different chargers. It will only charge when it's off, connected to a pc. When turning it on "usb cable connected" flashes up top, even though it's not. When it is connected and turned on and below 15%, it tells you to connect to a power source. I searched this and low and behold, several other s4 owners are having the same issue. It started happening two nights ago after I didn't get the phone on a charger before it died, then I charged it overnight - next morning it wouldn't start up. I don't think it has anything to do with having the twrp bootloader though, because it had been on there a couple weeks and restarted more than once with no issues.
If anyone knows how to fix the usb thing, I've got...lets say a $50 reward up for grabs. Not much but it's all I can afford to not void my warranty.
Click to expand...
Click to collapse
The problem with the custom recovery partition you have on there is that it prevents you from doing a factory reset in the settings menu. At least as far as I'm aware. If mobile ODIN worked on our phones I would say download that and re-flash with the tar file on your msd card. SafeStrap might be a way to give this a try. I can't link to another forum in here but I would look into that.
Maybe replace the usb port yourself
https://www.youtube.com/watch?v=F5e3r_2N15c
Dolphlungegrin said:
The problem with the custom recovery partition you have on there is that it prevents you from doing a factory reset in the settings menu. At least as far as I'm aware. If mobile ODIN worked on our phones I would say download that and re-flash with the tar file on your msd card. SafeStrap might be a way to give this a try. I can't link to another forum in here but I would look into that.
Click to expand...
Click to collapse
Well I'm not exactly sure what did it, but I used a small flathead screwdriver to bend the connector inside the usb port up a little, as I read that can be an issue with these phones, and used an old cable from a blackberry, and one of the two let me get it connected to the pc and flashed back to the stock rom via ODIN. Still won't charge with any combination of wall chargers/cables, so I'm going to take it in to Verizon. But it's a huge sigh of relief knowing that they won't be able to claim I damaged it by putting a custom bootloader on. Thanks for the input. Hope OP gets his problems sorted also.
bretbretterson said:
But here's where I think I'm in trouble - I had loaded the TWRP bootloader before I found out it wouldn't work with the ME7 firmware, and never bothered flashing the phone back (stupid, I know). Is there no way to flash back to stock rom via the SD card? Right now when I go into recovery mode, it just goes to the "Downloading" screen. Does anybody know a way I can get TWRP off?
.
Click to expand...
Click to collapse
If you were on me7 you shouldn't have been able to get twrp as your recovery. So if you are on me7 then your recovery is still stock even if you tried to flash twrp.
Sent from my VZW Galaxy S4 using Tapatalk 4
nativi said:
If you were on me7 you shouldn't have been able to get twrp as your recovery. So if you are on me7 then your recovery is still stock even if you tried to flash twrp.
Sent from my VZW Galaxy S4 using Tapatalk 4
Click to expand...
Click to collapse
That may have been true, I might have been trying the wrong buttons to get to recovery. Still learning some stuff. But the twrp loader definitely changed the splash and download screen enough that I needed to get it off so that no red flags will be thrown when I take it in to Verizon to have them look at it.
Thanks for everybody's help! I managed to connect to ODIN by pushing the usb in different ways until I got a connection and sent it back to Verizon completely stock
Sent from my SCH-I545 using xda app-developers app

[Q] went back to factory to return phone, it updated to 4.3...froze on loading screen

so i was planning on turning in my note 2 tomorrow to get a new phone...so i wanted to put the stock image back on it...went back to 4.1.2, no problem. then it updates to 4.3 and it's stuck in bootloop...just shows the "note 2" logo...i can't get into the volume up + power + home to erase the cache...it won't even get to that screen...all i can do is get into the odin menu...i have reloaded 4.3 about 6 times, trying different combinations of partitioning and not partitioning, neither works.
if i choose the "nand erase all" box...am i just asking for trouble? i've been messing with this for about 5 hours now...any help is greatly appreciated, i tried googling for at least 2 hours but i can't find anyone that has this specific issue...
also, i've tried using kies, it won't recognize the phone...i can't do the one where you put in the model number, says my phone can't initialize the update...grr...
RONxBURGUNDY said:
so i was planning on turning in my note 2 tomorrow to get a new phone...so i wanted to put the stock image back on it...went back to 4.1.2, no problem. then it updates to 4.3 and it's stuck in bootloop...just shows the "note 2" logo...i can't get into the volume up + power + home to erase the cache...it won't even get to that screen...all i can do is get into the odin menu...i have reloaded 4.3 about 6 times, trying different combinations of partitioning and not partitioning, neither works.
if i choose the "nand erase all" box...am i just asking for trouble? i've been messing with this for about 5 hours now...any help is greatly appreciated, i tried googling for at least 2 hours but i can't find anyone that has this specific issue...
Click to expand...
Click to collapse
RONxBURGUNDY said:
also, i've tried using kies, it won't recognize the phone...i can't do the one where you put in the model number, says my phone can't initialize the update...grr...
Click to expand...
Click to collapse
if i remember correctly, i stumble something like this a while back with my cousin phone.
what i do back then is to odin cwm recovery, and after that for some reason i could get to recovery
Bonkurei said:
if i remember correctly, i stumble something like this a while back with my cousin phone.
what i do back then is to odin cwm recovery, and after that for some reason i could get to recovery
Click to expand...
Click to collapse
just tried to put cwm on it...odin won't let it work...says "nand write start"...then says "fail!"...could it be because i "think" it's on 4.3 now? there's a message that says "knox warranty void: 0"...i think that's a new thing on 4.3...?
i'm about to just smash it and squaretrade warranty it lol
RONxBURGUNDY said:
just tried to put cwm on it...odin won't let it work...says "nand write start"...then says "fail!"...could it be because i "think" it's on 4.3 now? there's a message that says "knox warranty void: 0"...i think that's a new thing on 4.3...?
i'm about to just smash it and squaretrade warranty it lol
Click to expand...
Click to collapse
lol kinda sad to see it smash, sorry it dont work for you.
also if my memory serve me right, my cousin phone are s3 with 4.3 on it, so in my case it work on 4.3
RONxBURGUNDY said:
just tried to put cwm on it...odin won't let it work...says "nand write start"...then says "fail!"...could it be because i "think" it's on 4.3 now? there's a message that says "knox warranty void: 0"...i think that's a new thing on 4.3...?
i'm about to just smash it and squaretrade warranty it lol
Click to expand...
Click to collapse
That would be correct.. You are on a 4.3 bootloader
You need to flash via odin..MJ9 Kies tar.. Also use the pit when flashing
Sent from my SCH-I605 using xda app-developers app
lacoursiere18 said:
That would be correct.. You are on a 4.3 bootloader
You need to flash via odin..MJ9 Kies tar.. Also use the pit when flashing
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
used the pit...flashed I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 that i downloaded from here...still stuck on note II splash logo, can't get into recovery, can still get in odin. computer will recognize it's hooked up, but kies won't connect either. think i'm giving up on it
RONxBURGUNDY said:
used the pit...flashed I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 that i downloaded from here...still stuck on note II splash logo, can't get into recovery, can still get in odin. computer will recognize it's hooked up, but kies won't connect either. think i'm giving up on it
Click to expand...
Click to collapse
Recovery meaning stock recovery? Bc your on 4.3 bootloader so you won't be able to have a custom recovery unless on safe strap.. see if you have stock recovery and do a factory reset once Odin goes though fine
Sent from my SCH-I605 using xda app-developers app
lacoursiere18 said:
Recovery meaning stock recovery? Bc your on 4.3 bootloader so you won't be able to have a custom recovery unless on safe strap.. see if you have stock recovery and do a factory reset once Odin goes though fine
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
yup i think what he meant is stock recovery, and after taking ota 4.3 his phone goes bootloop and he cant perform factory reset because he cant get in to stock recovery. cmiiw.
Bonkurei said:
yup i think what he meant is stock recovery, and after taking ota 4.3 his phone goes bootloop and he cant perform factory reset because he cant get in to stock recovery. cmiiw.
Click to expand...
Click to collapse
yup, exactly right. pretty close to giving up here but that's ok...i can just break it. i've already traded in another phone...got myself an m8...
thanks anyways.
After my grand daughter got my SCH-i650 into TWRP recovery mode and then proceeded to really (&#$^@# it up, needless to say it was totally screwed. My fault though. I ended up flashing with odin back to stock and used the MJ9 4.3 version.I didn't know that the boot loader was locked up tight on this one so I am stuck with it. I rooted, then put the new safe strap on it and got stuck in a splash screen. I could hear messages coming through but my screen was locked. Long story short, what finally worked was what you all said to do in this thread and then stock recovery and factory reset. At least I have my phone back. I really miss Alliance and Trent's rom but glad to at least have my phone working. Thank you all for all the help and suggestions.

[Q] Recovery Mode is broken. Phone won't boot properly.

I'll first list specs of my phone so it gives you some information you might need to help me solve my problem.
Verizon Galaxy S4
Android 4.3 MK2
Download mode works properly. Phone will not turn on unless it is plugged in via micro USB. Recovery mode boot loops.
(Recovery mode) I hold volume up and power after I plug in the micro usb to turn the phone on, and it shows the samsung logo, and the blue text pops up in the corner and says "Recovery Booting". After about 2 seconds of it showing that, it'll just black screen and repeat this boot loop of the samsung logo popping up and the blue text as if I have the recovery keys held down.
What led up to all of this is, my phone crashed and it turned off and tried to reboot, and crashed during the reboot. That's where I ran into the problem with the phone not turning on unless it was plugged in(battery is fully charged). At that time, if I plugged it in and didn't touch any keys, it would vibrate, and then a battery icon with a gray circle loading thing would pop up in a frozen picture. Then after about 8 seconds, it'd black screen and boot loop that. I couldn't get into Recovery at that time, but download worked fine. So then I googled a little and I flashed something onto my phone using Odin and Download mode. The file is supposed to make the default boot sequence go to recovery mode. This worked, but since Recovery mode is broken, it doesn't work entirely. After this, I didn't do anything for a day, and then I read some posts and tried flashing both a Wipe and No-wipe stock firmware MK2. Both of which did not work, since still, the phone was defaulting its boot to the broken recovery mode.
So as far as I know, the only way to do anything to the phone is through Odin and Download mode since nothing else works. I'm really hoping I'll be able to fix this, because I'd rather not pay $100 for a new phone :/
Basically what I'm asking for is what I should do next.. My only last thought is(If its possible) to wipe the phone using Odin, then putting the stock firmware back onto it. (The wipe of course getting rid of that stupid file that makes it go into recovery mode.
Baurblades43 said:
I'll first list specs of my phone so it gives you some information you might need to help me solve my problem.
Verizon Galaxy S4
Android 4.3 MK2
Download mode works properly. Phone will not turn on unless it is plugged in via micro USB. Recovery mode boot loops.
(Recovery mode) I hold volume up and power after I plug in the micro usb to turn the phone on, and it shows the samsung logo, and the blue text pops up in the corner and says "Recovery Booting". After about 2 seconds of it showing that, it'll just black screen and repeat this boot loop of the samsung logo popping up and the blue text as if I have the recovery keys held down.
What led up to all of this is, my phone crashed and it turned off and tried to reboot, and crashed during the reboot. That's where I ran into the problem with the phone not turning on unless it was plugged in(battery is fully charged). At that time, if I plugged it in and didn't touch any keys, it would vibrate, and then a battery icon with a gray circle loading thing would pop up in a frozen picture. Then after about 8 seconds, it'd black screen and boot loop that. I couldn't get into Recovery at that time, but download worked fine. So then I googled a little and I flashed something onto my phone using Odin and Download mode. The file is supposed to make the default boot sequence go to recovery mode. This worked, but since Recovery mode is broken, it doesn't work entirely. After this, I didn't do anything for a day, and then I read some posts and tried flashing both a Wipe and No-wipe stock firmware MK2. Both of which did not work, since still, the phone was defaulting its boot to the broken recovery mode.
So as far as I know, the only way to do anything to the phone is through Odin and Download mode since nothing else works. I'm really hoping I'll be able to fix this, because I'd rather not pay $100 for a new phone :/
Basically what I'm asking for is what I should do next.. My only last thought is(If its possible) to wipe the phone using Odin, then putting the stock firmware back onto it. (The wipe of course getting rid of that stupid file that makes it go into recovery mode.
Click to expand...
Click to collapse
are you an unrooted stock ROM??
I'm sure someone smarter then me will know exactly what is going on here but things I'd try in the mean time is another Odin file possibly. I believe Surge has said that if MK2 file doesn't work to try the MJ7 full wipe/Re-Partition one. At this point what you got to lose?
Sent from my SCH-I545 using Tapatalk
decaturbob said:
are you an unrooted stock ROM??
Click to expand...
Click to collapse
I am rooted with safestrap installed. Using the Hyperdrive ROM
Mistertac said:
I'm sure someone smarter then me will know exactly what is going on here but things I'd try in the mean time is another Odin file possibly. I believe Surge has said that if MK2 file doesn't work to try the MJ7 full wipe/Re-Partition one. At this point what you got to lose?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I believe I've already done this? I'm not sure. I'll have to check once I get home later in the day.
Baurblades43 said:
I believe I've already done this? I'm not sure. I'll have to check once I get home later in the day.
Click to expand...
Click to collapse
I would strongly suggest the Full Wipe method back to MK2. As long as you can boot into Download mode this is probably the best way to get a clean OS working again. From there you know the drill, Saferoot, SS, etc.
http://forum.xda-developers.com/showthread.php?t=2578209
Use sp flash tool and install another recovery. That will surely work. Just download sp flash tool and drivers for your device and install these files in your pc. After that download recovery.img and scatter file.txt for your device. First load the scattered file.txt using sp flash tool, now uncheck all the tick box except the recovery. Now click on recovery and select the recovery.img which you have downloaded. Now take out your phone's battery and connect it via usb cable. Make sure you have installed your phone's drivers. Click on download button on sp flash tool. If not works then remove the usb cable and reconnect again. You will see a green circle saying its done. Click on ok. And try to get into recovery again.
Sent from unnamed ROM using xda premium app
naveen6252 said:
Use sp flash tool and install another recovery. That will surely work. Just download sp flash tool and drivers for your device and install these files in your pc. After that download recovery.img and scatter file.txt for your device. First load the scattered file.txt using sp flash tool, now uncheck all the tick box except the recovery. Now click on recovery and select the recovery.img which you have downloaded. Now take out your phone's battery and connect it via usb cable. Make sure you have installed your phone's drivers. Click on download button on sp flash tool. If not works then remove the usb cable and reconnect again. You will see a green circle saying its done. Click on ok. And try to get into recovery again.
Sent from unnamed ROM using xda premium app
Click to expand...
Click to collapse
If he's using Safestrap, it most likely means he can't flash a recovery image. He could brick his phone.
Was just going to say that. I don't know much about that flash tool myself... Is it an alternative to Odin? From the little I read... You can flash an entire rom or just something in particular to repair a phone. Either way I don't think the OP should try that method. Stick with Odin.
Sent from my SCH-I545 using Tapatalk
riker147 said:
If he's using Safestrap, it most likely means he can't flash a recovery image. He could brick his phone.
Click to expand...
Click to collapse
+1, the only safe option is to flash a clean factory image via Odin. Otherwise say hello to your new doorstop if you mess with Recovery on MK2 locked bootloader
Flash new image >> 15-25 minutes
Root >> 2-3 minutes
SS >> 3-5 minutes
HD RLS15 (for example) >> 15 minutes
In about an hour or so phone is back up and running. No brainer..........
cbmggm said:
+1, the only safe option is to flash a clean factory image via Odin. Otherwise say hello to your new doorstop if you mess with Recovery on MK2 locked bootloader
Flash new image >> 15-25 minutes
Root >> 2-3 minutes
SS >> 3-5 minutes
HD RLS15 (for example) >> 15 minutes
In about an hour or so phone is back up and running. No brainer..........
Click to expand...
Click to collapse
The thing is.. I've tried flashing new images before, and all its doing is overwriting my old one, but the stupid factory thing I flashed makes the default path the broken recovery so I don't think this will work.
Baurblades43 said:
The thing is.. I've tried flashing new images before, and all its doing is overwriting my old one, but the stupid factory thing I flashed makes the default path the broken recovery so I don't think this will work.
Click to expand...
Click to collapse
Are you sure you flashed the full wipe tar file? I've successfully used this method numerous times.
http://www.androidfilehost.com/?fid=23269279319198294
Make sure you download to PC first then copy to your external SD card on your phone.
Sent from my SCH-I545 using xda app-developers app
cbmggm said:
Are you sure you flashed the full wipe tar file? I've successfully used this method numerous times.
http://www.androidfilehost.com/?fid=23269279319198294
Make sure you download to PC first then copy to your external SD card on your phone.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Umm.. Why would I want to put that on my external SD card? Wouldn't I want to just use it through ODIN?
Oops sorry I meant to leave the tar file on the PC.
Sent from my SCH-I545 using xda app-developers app
cbmggm said:
Oops sorry I meant to leave the tar file on the PC.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Haha alright. I'll go ahead and download this file and give it a go. Wish me luck.
cbmggm said:
Oops sorry I meant to leave the tar file on the PC.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Also, can you give me a quick guide on how to flash this through Odin? I just wanna make sure I'm not doing anything wrong.
Baurblades43 said:
Also, can you give me a quick guide on how to flash this through Odin? I just wanna make sure I'm not doing anything wrong.
Click to expand...
Click to collapse
Directions are in the thread: http://forum.xda-developers.com/showthread.php?t=2578209
Oishikatta said:
Directions are in the thread: http://forum.xda-developers.com/showthread.php?t=2578209
Click to expand...
Click to collapse
I followed the directions for everything as they were given and I got the same result I've gotten after flashing anything. Everything works fine, then the big blue "RESET" icon appears on Odin, then the phone reboots, I get samsung logo, and then the blue "recovery booting" text shows up.. and then the screen blacks out, and boot loops that same thing.
Baurblades43 said:
I followed the directions for everything as they were given and I got the same result I've gotten after flashing anything. Everything works fine, then the big blue "RESET" icon appears on Odin, then the phone reboots, I get samsung logo, and then the blue "recovery booting" text shows up.. and then the screen blacks out, and boot loops that same thing.
Click to expand...
Click to collapse
Make sure you're using the Full Wipe image (SCH-I545_VZW_1_20131212083410_mwx72ql56g_fac.zip), and have extracted it to a .tar.md5
Also download the JFLTE_USA_VZW_16G.pit (assuming you have the 16GB version of the S4).
Put the .tar.md5 in the AP section and the PIT file in the PIT section.
Leave the other checkboxes in Odin at their defaults.
Take a screenshot at this point, click Start, and then take another screenshot when it completes or gives an error.
Oishikatta said:
Make sure you're using the Full Wipe image (SCH-I545_VZW_1_20131212083410_mwx72ql56g_fac.zip), and have extracted it to a .tar.md5
Also download the JFLTE_USA_VZW_16G.pit (assuming you have the 16GB version of the S4).
Put the .tar.md5 in the AP section and the PIT file in the PIT section.
Leave the other checkboxes in Odin at their defaults.
Take a screenshot at this point, click Start, and then take another screenshot when it completes or gives an error.
Click to expand...
Click to collapse
Alright. I did a lot between your post and now. All of the information for everything I did is underneath each picture thats posted. So read them carefully.
http://imgur.com/3c4YZoz,CjiLmlY,Gfjx7Tc,TO1xSMV#0
EDIT: I looked up the battery icon problem and I found some interesting news. After all of the struggling with the darn phone, this is a common problem with this phone on 4.3. Its an overheating issue to the PBA(Motherboard I think). Thanks everyone for the help, I'm just gonna send it in and get a new phone.

[HELP]ODIN Stock Firmware Flash Issue. Virgin GT-I9300

I'm having real issues trying to get a stock ROM on my Virgin Mobile S3 (GT-I9300) and I'm hoping you guys can help me. I've looked absolutely everywhere for a solution but so far nothing has worked.
OK so a little history about the problem:
Using phone as normal, and then randomly turns off. Turn it back on and I get the two Samsung splash screens loop booting constantly. I boot into recovery mode and do a factory reset - same problem. Clear the cache - same problem. Send phone back to Virgin and they tell me I've rooted and installed a custom ROM which I absolutely have not but they have a screenshot with the custom counter showing '1'.
I've no idea how this is possible, but I would have remembered if I'd installed a custom ROM. Anyway, they send it back because I'm not going to fork out £100 for them to flash it.
So...lots of research later, I download the latest Odin (3.09), find the most likely stock ROM that will work with my phone (Carrier is Virgin Mobile UK). I find this ROM on SamMobile: I9300XXUGMK6_I9300OXAGMK6_BTU. Cannot for the life of me find an actual Virgin rom so this apparently should be fine as it's a generic EU build.
Fine, so I apply it using the AP selection in Odin, connect phone, it goes through and applies fine "PASS" etc.. and phone reboots automatically.
Now, it just sits at the Samsung splash screen (the static white text) and doesn't go any further. I've left it upwards of 10 minutes but no dice. So look online and find threads that suggest booting to recovery and doing a factory reset will do the trick. So try that (Power+volume up+home) and same problem - static splash screen. Balls.
So now I don't know what to do. I either need to try an actual Virgin ROM which doesn't seem to exist(?!) or my phone is truely bricked and I'll finally have a good reason to destroy the thing.
Can anyone let me know what the next steps should be? I would be eternally grateful.
Thanks in advance.
I found the s3 to be a pain when doing a reset. Basically do it twice. Wipe, flash, wipe then boot. As far as I know btu is correct but virmin mobile used to rent their airspace from tmobile who are now half ee. Such a minefield..
Sent from my GT-I9300 using Tapatalk
shivadow said:
I found the s3 to be a pain when doing a reset. Basically do it twice. Wipe, flash, wipe then boot. As far as I know btu is correct but virmin mobile used to rent their airspace from tmobile who are now half ee. Such a minefield..
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
When you say 'wipe' do you mean factory reset via recovery mode? Because I'm not able to access that. All I can get to is Download Manager to use with Odin...
I thought you said you could access recovery and you had cleared cache. In that case you are buggered. If it goes through the flashing phase and reboots but you still cannot get into recovery then you have 3 options..
1. Flash another rom but no lower than 4.3. Carrier shouldn't matter.
2. Full on flash with pit file (dangerous and can perma brick).
3. Return the phone under warranty and state that the flash counter also clocks official flashes too, samsung should know this as they make the phone.. staff need training if they say otherwise.
Sent from my GT-I9300 using Tapatalk
Try the rescue firmware from general forum, follow the instructions exactly as it includes a pit.
It sounds like nand failure, so it's possible that you won't be able to fix it.
Sent from my GT-I9300 using Tapatalk
I thought you said you could access recovery and you had cleared cache.
Click to expand...
Click to collapse
Apologies for not being clearer, before sending it back to Virgin for the warranty repair I could access the recovery mode fine, when I got it back I couldn't - whether that was caused by the flashing of the firmware or something Virgin did I don't know unfortunately.
Try the rescue firmware from general forum, follow the instructions exactly as it includes a pit.
Click to expand...
Click to collapse
Thanks for the tip - I've flashed the stock recovery and I can now get into recovery mode! Looks slightly different but I can now access the factory reset/wipe cache options so that's some improvement.
I'm just downloading the stock international ROM as per this thread http://forum.xda-developers.com/galaxy-s3/general/fix-s3-to-factory-unroot-stock-recovery-t2323847 but it's going to take a few hours. Thanks so much for your advice so far i'll report back once the download completes.
No joy
I can however get into download mode and recovery mode now. Is there anything else I can try? Is it possible I can get a custom recovery image on there and flash it with something other than the stock rom?
I've got a feeling you're correct and it could be a hardware fault. Virgin say I can pay £100 to get it fixed, if they have to replace the entire phone that would prove it wasn't 'tampering' that caused it so I could potentially get my money back I guess, if I complained. I think that might be my only option now.
Ok I just booted into recovery mode and I was greeted with this error:
Any ideas what this could mean?
crispin85 said:
Ok I just booted into recovery mode and I was greeted with this error:
Any ideas what this could mean?
Click to expand...
Click to collapse
I say this to people who have this sort of problem but I mention the dreaded word and they tend to ignore it but will tell you what to try anyway.
Install Kies 3 for android 4.3 (there I said it Kies) on the top menu bar click Tools then Firmware Upgrade and Installation
Follow the on screen instructions, this process will wipe the phone and install the most up to date original carrier / phone firmware, after this the phone should work and you can then root, flash roms etc , it may work for you so try it, don't just dismiss it because it refers to the use of Kies
ag4751 said:
I say this to people who have this sort of problem but I mention the dreaded word and they tend to ignore it but will tell you what to try anyway.
Install Kies 3 for android 4.3 (there I said it Kies) on the top menu bar click Tools then Firmware Upgrade and Installation
Follow the on screen instructions, this process will wipe the phone and install the most up to date original carrier / phone firmware, after this the phone should work and you can then root, flash roms etc , it may work for you so try it, don't just dismiss it because it refers to the use of Kies
Click to expand...
Click to collapse
Unfortunately I've already tried Kies, and it doesn't recognise the device when in recovery mode.
crispin85 said:
Unfortunately I've already tried Kies, and it doesn't recognise the device when in recovery mode.
Click to expand...
Click to collapse
Make sure you are using the USB cable supplied with the phone and it is connected direct to your PC USB port, ideally the ones on the back but don't connect through any multi USB port connectors.
The USB cables and how you connect can make a difference

Categories

Resources