Related
If you ...
find a bug or problem on 2.2, post here
find a solution on how to fix the bug, post here
want to get help on how to fix the bug, post here
anything else, goes here
This thread are meant for bug/problem solution and reported bug list of 2.2 custom ROM which i will try to manage, so people are not posting same bug, and asking for same solution all over again in X10 Custom ROM AOSP thread.
Limitation
Cannot Mount via USB
2.2 Custom ROM put the SYSTEM partition on your phone memory and the DATA partition in your SD card. That is why you cannot dismount the SD card from Android to mount to your PC.
No App2SD
2.2 Custom ROM is still running on 2.1 Custom Kernel which not supporting this.
Bug list
#0001 - WiFi not working - Fixed on 2.2
#0002 - Random android.process.media force close - Fixed on 2.2
#0003 - Home button not working, and no Lock Screen - Fixed on 2.2
#0004 - Cannot install certain APK (Angry Bird)
#0005 - No radio, no network and flashing Home - New on 0.0.2
#0006 - ADB shell have SU access, but Titanium Backup cannot work - New on 0.0.2
#0007 - SD Card non-ascii folder show as ???
#0008 - Facebook Contact Sync not available
#0009 - CPU Governor set to performance by default
Solutions for bugs
#0001 - How to enable WiFi on 2.2 Custom ROM
1. Try to enable WiFi, of course it will not work.. just do it.
2. WiFi will goes off automatically
3. Run
Code:
adb shell /system/bin/wlan_tool
4. If the adb stucks, just press CTRL+C
5. Repeat step 4 until you crash the phone
6. After reboot, your WiFi will work.
or
Code:
adb shell killall servicemanager
Post Reference
#0002 - android.process.media FC solution
0.0.1 compiled with prefilled databases which invalid for your phone
Code:
adb shell
cd /data/data/com.android.providers.media/databases
rm *
reboot
or this will ensure no invalid data anymore but will remove fixes for bug #0003
Code:
adb shell
cd /data/
rm -r data
mkdir data
reboot
Post Reference
#0003 - Fix Home Button & Lock Screen
Download sqlite here
First pull the db file first.
Code:
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
Then add value to its content
Code:
sqlite3.exe settings.db
sqlite> INSERT INTO "secure" VALUES(67,'device_provisioned','1');
sqlite> .exit
Then push back the db
Code:
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
Then reboot.
Post Reference
#0004 - Solving installing APK problems
Currently the 2.2 Custom ROM does not support app2sd, and some APK may configure it self to be installed in sdcard.
So we force it to install on internal with code below
Code:
adb shell pm setInstallLocation 1
adb install -l com.rovio.angrybirds.apk
Post Reference
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
Post Reference
#0006 - Fixing SU access for Titanium Backup
Run this command
Code:
adb shell chmod 4755 /system/bin/su
Post Reference
#0007 - Fixing SD card mount command to show unicode letters
Modify your chargemon file so its enables utf8 for non ascii letter.
You need to do this on 2.1 ROM, not 2.2 ROM. The file is located in /system/bin
look for this
Code:
mount -t vfat -o rw,noatime,nodiratime /dev/block/mmcblk0p1 /sd
and change into this
Code:
mount -t vfat -o rw,noatime,nodiratime,utf8 /dev/block/mmcblk0p1 /sd
Notes:
You must use a Unix/Linux format capable text editor for this. Notepad will not work.
You can try ultraedit for it.
Post Reference
#0008 - Fix Facebook Sync
Download the ContactsProvider.apk here, then install to your Android using push command
Code:
adb push ContactsProvider.apk /system/app/ContactsProvider.apk
adb reboot
Post Reference
#0009 - Using SetCPU
By default is Performance, fast but wasting too much battery.
Use SetCPU and set to OnDemand.
Post Reference
2.2 Custom ROM FAQ
How and what happened if upgrade from 0.0.1 to 0.0.2?
Just copy data.img and system.img replacing your current one in FreeX10 folder.
This will replace all your 0.0.1 data, be sure to back up first with Titanium Backup
WiFi is running and connected, but cannot browser
This problem seems to be occurring on selected few.. You can set static IP to your android.
Go to Settings -> Wireless ... -> WiFi, then press menu button. From there you can se static IP
Is there a possibility of Timescape and Mediascape for 2.2 Custom ROM
The answer is yes, its possible.
I managed to install Mediascape.apk into 2.2 Custom ROM, but cannot run.
The reason it cannot run is because UX is using a lot of things in Framework-res.apk, images, layout, styles, and etc which cannot be copied directly from SE 2.1 into 2.2 AOSP. It requires someone to properly put all values, resolving conflicts inside Framework-res.apk before the UX can run, which will take months or at least weeks if someone dedicated his or her day job for it. Then after that we still need to deal with external files. So in conclusion, while it still possible, i don't think anyone will do it because of the time demanding process.
I want to help devs solving bugs, i found one but i don't know what actually happend.
While usb connected, from command prompt, type
Code:
adb logcat > logcat.txt
This will output a lot of debugging info into logcat.txt file, later if you find bug, you take a look inside the file.
See anything error or info related to the bug, and post here.. When writing the logcat.txt output, but them inside
Code:
brackets.
Do not post everything.. post few lines related to the bugs.
2.2 Custom ROM Testing Tools
Service Menu
WARNING: DO NOT INSTALL THIS UNLESS YOU DO DEVS, END USER DO NOT INSTALL
PURPOSE: MAYBE FOR TESTING DEVICE FEATURE, MIGHT BREAK SYSTEM APPS
Enable SE Service Menu for device testing. For devs only. You need to put adb stuff in the directory for install.bat to run.
Install framework
Code:
adb push permissions /system/etc/permissions
adb push lib /system/framework
adb reboot
Install applications
Code:
adb install app\bootinfo3.apk
adb install app\ServiceMenu2.apk
adb install app\com.laac.launcher.servicemenu.apk
Nice work. THis is handy
As i posted in the Main thread!
I think some of the force closes, (mainly acore and google framework) and the fact that the market crashes, come down to importing a vcard!
I imported vcard, get many force closes, market stops working, I clean install and don't install the vcard. Everything functions fine.
I do believe this is the reason!
Greeet ~~!! but can u tell me the seloution of this proplem :
i was run 2.2 001 ok ? then i back to to SE 2.1 to change old system.img & data.img by the new on FreeX10_alpha-release_0.0.2-UPDATE , ok ? then i reboot my phone into 2.2 , it run but like u make a refresh on computer ! evry 3 second !
thnx
Ahmed radi said:
Greeet ~~!! but can u tell me the seloution of this proplem :
i was run 2.2 001 ok ? then i back to to SE 2.1 to change old system.img & data.img by the new on FreeX10_alpha-release_0.0.2-UPDATE , ok ? then i reboot my phone into 2.2 , it run but like u make a refresh on computer ! evry 3 second !
thnx
Click to expand...
Click to collapse
Please read the main post!
sorry but no one answer me there
Thanks
Thanks for this ,hopefully a post like this is made for the 1st post on 2.1
http://forum.xda-developers.com/showpost.php?p=9134882&postcount=1
awesome thread, very helpful. Hopefully more people will read this rather than constantly posting the same bugs in the main thread.
Ahmed radi said:
sorry but no one answer me there
Click to expand...
Click to collapse
hey ahmed
grb el solution da
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
i think en da el 7l
bye
bsthost said:
hey ahmed
grb el solution da
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
i think en da el 7l
bye
Click to expand...
Click to collapse
i dont know how to use adb shell is there anythread for newbie user how to use adb ?
angry birds on my x10 is working well....i take it from a previous backup and restrored on 2.2 with mybackup pro
Please post to http://forum.xda-developers.com/showthread.php?t=835308&page=9999 thread instead.
We don't need to create two discussion thread.
i fixed the wifi and flashing problem and i have connected to wifi but i cant access internet or market any it seems i have connected to my modem netwok still cant access to internet any idea how to fix this?
17mayis said:
i fixed the wifi and flashing problem and i have connected to wifi but i cant access internet or market any it seems i have connected to my modem netwok still cant access to internet any idea how to fix this?
Click to expand...
Click to collapse
Code:
setprop ro.kernel.android.ndns 2
setprop net.eth0.dns1 8.8.8.8
setprop net.eth0.dns2 8.8.4.4
New crash this morning : i tried to connect my BT headphone after that i've activated BT => BT has desactivated itself then the phone reboots.
zephyrix said:
Code:
setprop ro.kernel.android.ndns 2
setprop net.eth0.dns1 8.8.8.8
setprop net.eth0.dns2 8.8.4.4
Click to expand...
Click to collapse
i appreciate your answer man if you could tell me how to do this ? through adb shell or something else?
17mayis said:
i dont know how to use adb shell is there anythread for newbie user how to use adb ?
Click to expand...
Click to collapse
Google is your friend!
i have flashPlayer10.1 problem it,s to slow when i play on any website any solution what might be ?
I was looking up the partition layout of the Galaxy S III while I stumbled upon this problem.
The first time you run a command in 'adb shell' everything is fine, but when you try to run a second command, it just hangs. It doesn't crash, it just hangs.
So, I tried to find out what could be wrong, by doing the following: Instead of going into the shell itself, I just entered a semi-random command 'adb shell mount', which returned the normal result.
Then, I typed 'adb shell' and guess what? It returns a commonly known error: 'error: protocol fault (status 72 6f 6f 74?!)'
The status code is HEX, which translates to: 'error: protocol fault (status root?!)'
So I suppose this has something to do with the fact that my SGS3 is rooted.
I don't feel like unrooting it, but if someone would be so kind to test this on an unrooted SGS3 and report back the results here so we can investigate this further that would be greatly appreciated.
it works without any error.
do you know what to backup which contains kernel and ramdisk ?
Mine is rooted, with Omega Rom V3 and everything works perfect with adb.
Cranck said:
Mine is rooted, with Omega Rom V3 and everything works perfect with adb.
Click to expand...
Click to collapse
Have you tried multiple shell commands? I know adb functions, but it's about using adb shell.
I'm on the stock rom, rooted manually with CF's insecure kernel by the way.
I'm not sure this is related, but there is some very suspicious new functionality in the FactoryTest.apk, called "SysScope". Its some kind of service checking and verifying the authenticity of "something". But I have no idea of what, only that a related java file (ResultCode.class [sysscope.service] contain the following code segment:
Code:
[SIZE=2] arrayOfResultCode[0] = OK;
arrayOfResultCode[1] = ADB_RUNNING_AS_ROOT;
arrayOfResultCode[2] = PARTITION_TAMPERED;
arrayOfResultCode[3] = ROOT_PROCESS_FOUND;
arrayOfResultCode[4] = DANGEROUS_FILE_DETECTED;
arrayOfResultCode[5] = NOT_OFFICIAL_BINARY;
[/SIZE]
Then it looks for SysScope files in the SysScopeVerifyer.class like this:
Code:
[SIZE=2]/data/app/com.sec.android.app.sysscope-1.apk
/data/app/com.sec.android.app.sysscope-2.apk[/SIZE]
I suggest you to back these up, and then replace them, with empty files of the same name, and see what happens.
I have the exact same problem on the GS2, OneX, and OneS. I have no problem shelling into the devices using another system, but on one of my computers I have the same issue. Windows 7 64bit with jdk7 installed.
Also, I enabled adb trace to see what was being returned: set ADB_TRACE=all
-Entering ls three times on the OneX, the first time works correctly
Code:
ls
system/core/adb/commandline.c::stdin_read_thread():stdin_read_thread(): post uni
x_read(fdi=0,...)
system/core/adb/commandline.c::stdin_read_thread():stdin_read_thread(): pre unix
_read(fdi=0,...)
system/core/adb/commandline.c::read_and_dump():read_and_dump(): post adb_read(fd
=101): len=5
ls
system/core/adb/commandline.c::read_and_dump():read_and_dump(): pre adb_read(fd=
101)
system/core/adb/commandline.c::read_and_dump():read_and_dump(): post adb_read(fd
=101): len=32
acct
cache
config
cwkeys
d
system/core/adb/commandline.c::read_and_dump():read_and_dump(): pre adb_read(fd=
101)
system/core/adb/commandline.c::read_and_dump():read_and_dump(): post adb_read(fd
=101): len=318
data
default.prop
dev
devlog
etc
firmware_dsps
firmware_q6
firmware_radio
firmware_wcnss
init
init.elite.rc
init.goldfish.rc
init.qcom.rc
init.qcom.sh
init.rc
init.target.rc
init.usb.rc
mnt
proc
root
sbin
sdcard
sys
system
tombstones
ueventd.goldfish.rc
ueventd.rc
vendor
[email protected]:/ $ system/core/adb/commandline.c::read_and_dump():read_and_dump()
: pre adb_read(fd=101)
ls
system/core/adb/commandline.c::stdin_read_thread():stdin_read_thread(): post uni
x_read(fdi=0,...)
system/core/adb/commandline.c::stdin_read_thread():stdin_read_thread(): pre unix
_read(fdi=0,...)
ls
system/core/adb/commandline.c::stdin_read_thread():stdin_read_thread(): post uni
x_read(fdi=0,...)
system/core/adb/commandline.c::stdin_read_thread():stdin_read_thread(): pre unix
_read(fdi=0,...)
hi, i installed sshdroid on my galaxy s2 so i am wondering if there is any way to mess around with anything like start a fone call or send a text message from the terminal ?
i am looking for programs like netcat, sshfs, aplay, ... but none can be found.
i also notice this (not sure why):
Code:
/data/data/berserker.android.apps.sshdroid # ps auxw | grep tv
2594 system 0:59 /system/bin/tvoutserver
has anybody done anything cool from the android command line ?
is there someway i can run com.cooliris.media from the commandline ?
schneidz said:
hi, i installed sshdroid on my galaxy s2 so i am wondering if there is any way to mess around with anything like start a fone call or send a text message from the terminal ?
i am looking for programs like netcat, sshfs, aplay, ... but none can be found.
i also notice this (not sure why):
Code:
/data/data/berserker.android.apps.sshdroid # ps auxw | grep tv
2594 system 0:59 /system/bin/tvoutserver
has anybody done anything cool from the android command line ?
is there someway i can run com.cooliris.media from the commandline ?
Click to expand...
Click to collapse
I don't know what sshdroid does, but for sure you can use terminal emulator or adb shell to launch apps.
The "am" command can be used to launch applications.
The example below is to open Email app:
Code:
su
Code:
am start com.android.email
to dig in more:
http://forum.xda-developers.com/showpost.php?p=30175170&postcount=3
easy for sms less easy to make a direct call:
Code:
su
Code:
service call phone 2 s16 "123456789"
where 123456789 is the number you want to call
fyi, sshdroid turns your fone into an ssh server so i can log into my fone via wifi from my fedora machine and use an actual keyboard to issue commands instead of an on-screen keyboard.
its also useful for things like scp/sftp... i can mount the fones harddrive/sd-card with sshfs on my pc but i cant mount my pc's harddrive to the fone with sshfs. is there a solution for this yet (i think the problem is that there is no fuse module for android yet) ?
this is weird:
Code:
~ # am start com.cooliris.media
sh: am: not found
~ # which am
/system/bin/am
~ # /system/bin/am start com.cooliris.media
sh: /system/bin/am: not found
~ # whoami
root
~ # service call phone 2 s16 "0151234567"
Result: Parcel(
0x00000000: ffffffff 00000022 006e004f 0079006c '...."...O.n.l.y.'
0x00000010: 00530020 0061006d 00740072 00610063 ' .S.m.a.r.t.c.a.'
0x00000020: 00640072 00410020 00490050 006d0020 'r.d. .A.P.I. .m.'
0x00000030: 00790061 00610020 00630063 00730065 'a.y. .a.c.c.e.s.'
0x00000040: 00200073 00490055 00430043 00000000 's. .U.I.C.C.....')
made a little bit more progress:
Code:
/system/bin/am start com.cooliris.media
Starting: Intent { act=android.intent.action.VIEW dat=com.cooliris.media }
Error: Activity not started, unable to resolve Intent { act=android.intent.action.VIEW dat=com.cooliris.media flg=0x10000000 }
schneidz said:
fyi, sshdroid turns your fone into an ssh server so i can log into my fone via wifi from my fedora machine and use an actual keyboard to issue commands instead of an on-screen keyboard.
its also useful for things like scp/sftp... i can mount the fones harddrive/sd-card with sshfs on my pc but i cant mount my pc's harddrive to the fone with sshfs. is there a solution for this yet (i think the problem is that there is no fuse module for android yet) ?
this is weird:
Code:
~ # am start com.cooliris.media
sh: am: not found
~ # which am
/system/bin/am
~ # /system/bin/am start com.cooliris.media
sh: /system/bin/am: not found
~ # whoami
root
~ # service call phone 2 s16 "0151234567"
Result: Parcel(
0x00000000: ffffffff 00000022 006e004f 0079006c '...."...O.n.l.y.'
0x00000010: 00530020 0061006d 00740072 00610063 ' .S.m.a.r.t.c.a.'
0x00000020: 00640072 00410020 00490050 006d0020 'r.d. .A.P.I. .m.'
0x00000030: 00790061 00610020 00630063 00730065 'a.y. .a.c.c.e.s.'
0x00000040: 00200073 00490055 00430043 00000000 's. .U.I.C.C.....')
Click to expand...
Click to collapse
Informative.. thanks!!
Do someone or developer kindly explain
this.After rooting with kingoapp in my gionee
pioneer p1. I found this on system file -
>advanced_meta_init.rc and opened as text
and get some interesting infos which i dont
really understand .. Is the phone supports tv
out?
# change MTKFB permission for Settings App
JNI functions to set TVOut related status
chmod 0666 /dev/graphics/fb0
#TV-out
chmod 0664 /dev/TV-out
I add photo attachment. I found this hidden
settings by installing holo launcher and
selecting activity
.. Is there a way to enable it?..
Well, i struggled for half a day relentlessly and finally got Reaver Working on my Xiaomi Mi4 android phone with a big help from the below mentioned link , everything is going good and fine, i got the Reaver app working on my Rooted app without bcmon and it worked and i'm ready to hack the network but just as i bypassed "Test Monitor" successfully(by loading a few scripts and debugging) and hit "Start Attack" this thing showed up, below i've written down the issue as it appeared since i'm not allowed to post screenshots & Links untill i make 10 posts(i'm a new user) and the scripts that i used to bypass Test Monitor are attached below, i'm basically a noob but good at technical things, the guide mentioned in the below link isn't as easy as it is told there, there are a few more steps that aren't added in the guide!!
HELP URGENTLY!!!! I waisted a whole day trying to get it working, i'd be so grateful :laugh: if you could help me out with it! PLEASE!! :crying:
Here are those scripts i loaded and put the phone on debug mode
Custom activation script:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
Custom Warm-up Script
#!/bin/bash
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
Custom stop Script:
#!/bin/bash
svc wifi enable
echo “rfasuccess”
1. this happened first but i continued anyway.
Stdout:
"rfa success"
StdErr:
Control the Wifi manager
usage: svc wifi [enable[disable] Turn wifi on or off.
svc wifi prefer
set Wifi as the preferred data network
.//srart.shl[4]: sh :not found
.//start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : No Such File or Directory
./start.sh[6]: ./enable_bcmon : not found
2. and then this happened in the processing window
sh: <stdin>[3]: sh: not found
CANNOT LINK EXECUTABLE: could not load library "libcap.so.1" needed by "./reaver"; caused by library "libcap.so.1" not found
3. and finally when i hit stop, this message showed up
Stdout:
?rfasuccess?
StdErr:
Control the Wi-fi manager
usage: svc wifi[enable[disable]
Turn Wi-Fi on or off
svc wifi prefer
Set Wi-Fi as the preferred data network
These are the Steps i followed to get the monitoring mode done.
1.Download bcmon- (link)
2.Save the app on your sdcard but don’t install it.
3.download Reaver apk(RFA) and install it.- (link)
4.Download root explorer by speed speed software and install it.- (link)
6.Install and open bcmon app
keep it open for 5s and then press home.
(This will surely create a com.bcmon.bcmon folder in/Data/data)
7.Open root explorer and browse to the bcmon apk.
8.Select it and press view.
9.Open assets.
10.Copy all the files to /Data/data/com.bcmon.bcmon/files.
#If any file or folder of the same name is found then delete it#
/Now you’ll have to add custom scripts that I have given below(just copy them in a note editor and save with a .sh extension)
Start script-
Start script- mentioned above in custom start script
Warm script- mentioned above in custom warm up script
Stop script- mentioned above in custom stop script
#Now open root explorer
Browse to com.bcmon.bcmon/files/tools/reaver
Long press on it and press permissions and then check the execute boxes(all 3).now click OK.
Now in tools long press enable_bcmon and give it execute rights (all 3).now click OK .
#All set….now open reaver and scan for networks press on one with green color and with a good range.
Go to settings and monitor mode setting and unchek the use bcmon and load all the scripts properly.
#while loading scripts start.sh is the activation script,warm.sh is the warm up script and stop.sh is the stop script. #
Now scroll down and check the debugging mode.
#Go back to the attack screen and press test monitor mode.
Rfasuccess comes then press OK and press start attack.
#All done,now wait until it finds the routers key for you.
#This worked on my I ball slide 6318i,Alcatel ot 918n and redmi note.
goodpeace said:
Well, i struggled for half a day relentlessly and finally got Reaver Working on my Xiaomi Mi4 android phone with a big help from the below mentioned link , everything is going good and fine, i got the Reaver app working on my Rooted app without bcmon and it worked and i'm ready to hack the network but just as i bypassed "Test Monitor" successfully(by loading a few scripts and debugging) and hit "Start Attack" this thing showed up, below i've written down the issue as it appeared since i'm not allowed to post screenshots & Links untill i make 10 posts(i'm a new user) and the scripts that i used to bypass Test Monitor are attached below, i'm basically a noob but good at technical things, the guide mentioned in the below link isn't as easy as it is told there, there are a few more steps that aren't added in the guide!!
HELP URGENTLY!!!! I waisted a whole day trying to get it working, i'd be so grateful :laugh: if you could help me out with it! PLEASE!! :crying:
Here are those scripts i loaded and put the phone on debug mode
Custom activation script:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
Custom Warm-up Script
#!/bin/bash
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
Custom stop Script:
#!/bin/bash
svc wifi enable
echo “rfasuccess”
1. this happened first but i continued anyway.
Stdout:
"rfa success"
StdErr:
Control the Wifi manager
usage: svc wifi [enable[disable] Turn wifi on or off.
svc wifi prefer
set Wifi as the preferred data network
.//srart.shl[4]: sh :not found
.//start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : No Such File or Directory
./start.sh[6]: ./enable_bcmon : not found
2. and then this happened in the processing window
sh: <stdin>[3]: sh: not found
CANNOT LINK EXECUTABLE: could not load library "libcap.so.1" needed by "./reaver"; caused by library "libcap.so.1" not found
3. and finally when i hit stop, this message showed up
Stdout:
?rfasuccess?
StdErr:
Control the Wi-fi manager
usage: svc wifi[enable[disable]
Turn Wi-Fi on or off
svc wifi prefer
Set Wi-Fi as the preferred data network
These are the Steps i followed to get the monitoring mode done.
1.Download bcmon- (link)
2.Save the app on your sdcard but don’t install it.
3.download Reaver apk(RFA) and install it.- (link)
4.Download root explorer by speed speed software and install it.- (link)
6.Install and open bcmon app
keep it open for 5s and then press home.
(This will surely create a com.bcmon.bcmon folder in/Data/data)
7.Open root explorer and browse to the bcmon apk.
8.Select it and press view.
9.Open assets.
10.Copy all the files to /Data/data/com.bcmon.bcmon/files.
#If any file or folder of the same name is found then delete it#
/Now you’ll have to add custom scripts that I have given below(just copy them in a note editor and save with a .sh extension)
Start script-
Start script- mentioned above in custom start script
Warm script- mentioned above in custom warm up script
Stop script- mentioned above in custom stop script
#Now open root explorer
Browse to com.bcmon.bcmon/files/tools/reaver
Long press on it and press permissions and then check the execute boxes(all 3).now click OK.
Now in tools long press enable_bcmon and give it execute rights (all 3).now click OK .
#All set….now open reaver and scan for networks press on one with green color and with a good range.
Go to settings and monitor mode setting and unchek the use bcmon and load all the scripts properly.
#while loading scripts start.sh is the activation script,warm.sh is the warm up script and stop.sh is the stop script. #
Now scroll down and check the debugging mode.
#Go back to the attack screen and press test monitor mode.
Rfasuccess comes then press OK and press start attack.
#All done,now wait until it finds the routers key for you.
#This worked on my I ball slide 6318i,Alcatel ot 918n and redmi note.
Click to expand...
Click to collapse
let me know as well if you find any solution.
i get frist error
Start .sh not found plzzz help me bro
Same here pal!
The person who posted this method is my frnd on FB , whenever I tried to connect he ignored my text.
Stucked at the same..
So I was having the same error as the couple people above me, but I was able to get Reaver to recognize where my files were. I moved it off of the SD card to: /data/data/com.bcmon.bcmon
Then I manually typed in the location path of my .sh files:
/data/data/com.bcmon.bcmon/start.sh
/data/data/com.bcmon.bcmon/warm.sh
/data/data/com.bcmon.bcmon/stop.sh
Obviously you'll want to put in whatever you named those files there.
So I've gotten past that hurtle. I am however stuck with this new set of errors now, although it will allow me to progress to "start attack".
I'm new so the site is preventing me from posting these links normally but here are the two errors I'm getting:
Code:
Stdout: rfasuccess
StdErr: Control the Wi-Fi manager
usage: svc wifi [enable|disable]
Turn Wi-Fi on or off
./data/data/com.bcmon.bcmon/start.sh[4]: sh : not found
./data/data/com.bcmon.bcmon/start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : no such file or directory
.data/data/com.bcmon.bcmon/start.sh[6]: ./enable_bcmon : not found
After this I am able to progress and next see:
Code:
tmp-mksh: <stdin>[3]: sh: not found
error: only position independent executables (PIE) are supported.
Any suggestions?
- HTC One M7vzw
PacMan Rom 5.1.1
Stucked at same place
:silly::silly:
Libcap.so.1 error please sort it out soon..
Does anyone managed to solve this?
Your scripts shebang points to /bin/bash you could try changing to #!/system/bin/sh which should hopefully solve the sh not found error. More recent android versions force pie executables as a tool to help lower hack risks, the option there is to try to bypass pie systemwide or get a pie executable. Libcap error is due to the file not being present I'm not sure if your app is supposed to include it but it's not a standard android library.
Hey please help can I use in Micromax canvas nitro A310
Err msg displayed... Plzzz help
:Hi, m a general user of an android phone (without much technical skills). I have tried the method suggested step by step for using Reaver Rfa without bcmon and it enabled monitor mode but after that a popup appeared, which was as followed (unable to attach screenshot)
Stdout:
StdErr:
bmon_wrapper_loaded
K_Shell/10118:1442:<Stdin>[4]:
iwconfig:not found
I am unable to understand it. Please help
goodpeace said:
Well, i struggled for half a day relentlessly and finally got Reaver Working on my Xiaomi Mi4 android phone with a big help from the below mentioned link , everything is going good and fine, i got the Reaver app working on my Rooted app without bcmon and it worked and i'm ready to hack the network but just as i bypassed "Test Monitor" successfully(by loading a few scripts and debugging) and hit "Start Attack" this thing showed up, below i've written down the issue as it appeared since i'm not allowed to post screenshots & Links untill i make 10 posts(i'm a new user) and the scripts that i used to bypass Test Monitor are attached below, i'm basically a noob but good at technical things, the guide mentioned in the below link isn't as easy as it is told there, there are a few more steps that aren't added in the guide!!
HELP URGENTLY!!!! I waisted a whole day trying to get it working, i'd be so grateful :laugh: if you could help me out with it! PLEASE!! :crying:
Here are those scripts i loaded and put the phone on debug mode
Custom activation script:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
Custom Warm-up Script
#!/bin/bash
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
Custom stop Script:
#!/bin/bash
svc wifi enable
echo “rfasuccess”
1. this happened first but i continued anyway.
Stdout:
"rfa success"
StdErr:
Control the Wifi manager
usage: svc wifi [enable[disable] Turn wifi on or off.
svc wifi prefer
set Wifi as the preferred data network
.//srart.shl[4]: sh :not found
.//start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : No Such File or Directory
./start.sh[6]: ./enable_bcmon : not found
2. and then this happened in the processing window
sh: <stdin>[3]: sh: not found
CANNOT LINK EXECUTABLE: could not load library "libcap.so.1" needed by "./reaver"; caused by library "libcap.so.1" not found
3. and finally when i hit stop, this message showed up
Stdout:
?rfasuccess?
StdErr:
Control the Wi-fi manager
usage: svc wifi[enable[disable]
Turn Wi-Fi on or off
svc wifi prefer
Set Wi-Fi as the preferred data network
These are the Steps i followed to get the monitoring mode done.
1.Download bcmon- (link)
2.Save the app on your sdcard but don’t install it.
3.download Reaver apk(RFA) and install it.- (link)
4.Download root explorer by speed speed software and install it.- (link)
6.Install and open bcmon app
keep it open for 5s and then press home.
(This will surely create a com.bcmon.bcmon folder in/Data/data)
7.Open root explorer and browse to the bcmon apk.
8.Select it and press view.
9.Open assets.
10.Copy all the files to /Data/data/com.bcmon.bcmon/files.
#If any file or folder of the same name is found then delete it#
/Now you’ll have to add custom scripts that I have given below(just copy them in a note editor and save with a .sh extension)
Start script-
Start script- mentioned above in custom start script
Warm script- mentioned above in custom warm up script
Stop script- mentioned above in custom stop script
#Now open root explorer
Browse to com.bcmon.bcmon/files/tools/reaver
Long press on it and press permissions and then check the execute boxes(all 3).now click OK.
Now in tools long press enable_bcmon and give it execute rights (all 3).now click OK .
#All set….now open reaver and scan for networks press on one with green color and with a good range.
Go to settings and monitor mode setting and unchek the use bcmon and load all the scripts properly.
#while loading scripts start.sh is the activation script,warm.sh is the warm up script and stop.sh is the stop script. #
Now scroll down and check the debugging mode.
#Go back to the attack screen and press test monitor mode.
Rfasuccess comes then press OK and press start attack.
#All done,now wait until it finds the routers key for you.
#This worked on my I ball slide 6318i,Alcatel ot 918n and redmi note.
Click to expand...
Click to collapse
Please explain step by step on how you did this I'm stuck. Thanks.
BiteMyCAPTCHA said:
So I was having the same error as the couple people above me, but I was able to get Reaver to recognize where my files were. I moved it off of the SD card to: /data/data/com.bcmon.bcmon
Then I manually typed in the location path of my .sh files:
/data/data/com.bcmon.bcmon/start.sh
/data/data/com.bcmon.bcmon/warm.sh
/data/data/com.bcmon.bcmon/stop.sh
Obviously you'll want to put in whatever you named those files there.
So I've gotten past that hurtle. I am however stuck with this new set of errors now, although it will allow me to progress to "start attack".
I'm new so the site is preventing me from posting these links normally but here are the two errors I'm getting:
Code:
Stdout: rfasuccess
StdErr: Control the Wi-Fi manager
usage: svc wifi [enable|disable]
Turn Wi-Fi on or off
./data/data/com.bcmon.bcmon/start.sh[4]: sh : not found
./data/data/com.bcmon.bcmon/start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : no such file or directory
.data/data/com.bcmon.bcmon/start.sh[6]: ./enable_bcmon : not found
After this I am able to progress and next see:
Code:
tmp-mksh: <stdin>[3]: sh: not found
error: only position independent executables (PIE) are supported.
Any suggestions?
- HTC One M7vzw
PacMan Rom 5.1.1
Click to expand...
Click to collapse
Dude..
This is the same error that mentioned in the post
---------- Post added at 08:54 AM ---------- Previous post was at 08:53 AM ----------
10258Smoker said:
Libcap.so.1 error please sort it out soon..
Click to expand...
Click to collapse
find out libcap.so.1 from bcmon assets and put it on system/lib
How to copy bcmon files from rootex, there's no copy option, only extract.
goodpeace said:
Well, i struggled for half a day relentlessly and finally got Reaver Working on my Xiaomi Mi4 android phone with a big help from the below mentioned link , everything is going good and fine, i got the Reaver app working on my Rooted app without bcmon and it worked and i'm ready to hack the network but just as i bypassed "Test Monitor" successfully(by loading a few scripts and debugging) and hit "Start Attack" this thing showed up, below i've written down the issue as it appeared since i'm not allowed to post screenshots & Links untill i make 10 posts(i'm a new user) and the scripts that i used to bypass Test Monitor are attached below, i'm basically a noob but good at technical things, the guide mentioned in the below link isn't as easy as it is told there, there are a few more steps that aren't added in the guide!!
HELP URGENTLY!!!! I waisted a whole day trying to get it working, i'd be so grateful :laugh: if you could help me out with it! PLEASE!! :crying:
Here are those scripts i loaded and put the phone on debug mode
Custom activation script:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
Custom Warm-up Script
#!/bin/bash
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
Custom stop Script:
#!/bin/bash
svc wifi enable
echo “rfasuccess”
1. this happened first but i continued anyway.
Stdout:
"rfa success"
StdErr:
Control the Wifi manager
usage: svc wifi [enable[disable] Turn wifi on or off.
svc wifi prefer
set Wifi as the preferred data network
.//srart.shl[4]: sh :not found
.//start.sh[5]: cd: /data/data/com.bcmon.bcmon/files/tools : No Such File or Directory
./start.sh[6]: ./enable_bcmon : not found
2. and then this happened in the processing window
sh: <stdin>[3]: sh: not found
CANNOT LINK EXECUTABLE: could not load library "libcap.so.1" needed by "./reaver"; caused by library "libcap.so.1" not found
3. and finally when i hit stop, this message showed up
Stdout:
?rfasuccess?
StdErr:
Control the Wi-fi manager
usage: svc wifi[enable[disable]
Turn Wi-Fi on or off
svc wifi prefer
Set Wi-Fi as the preferred data network
These are the Steps i followed to get the monitoring mode done.
1.Download bcmon- (link)
2.Save the app on your sdcard but don’t install it.
3.download Reaver apk(RFA) and install it.- (link)
4.Download root explorer by speed speed software and install it.- (link)
6.Install and open bcmon app
keep it open for 5s and then press home.
(This will surely create a com.bcmon.bcmon folder in/Data/data)
7.Open root explorer and browse to the bcmon apk.
8.Select it and press view.
9.Open assets.
10.Copy all the files to /Data/data/com.bcmon.bcmon/files.
#If any file or folder of the same name is found then delete it#
/Now you’ll have to add custom scripts that I have given below(just copy them in a note editor and save with a .sh extension)
Start script-
Start script- mentioned above in custom start script
Warm script- mentioned above in custom warm up script
Stop script- mentioned above in custom stop script
#Now open root explorer
Browse to com.bcmon.bcmon/files/tools/reaver
Long press on it and press permissions and then check the execute boxes(all 3).now click OK.
Now in tools long press enable_bcmon and give it execute rights (all 3).now click OK .
#All set….now open reaver and scan for networks press on one with green color and with a good range.
Go to settings and monitor mode setting and unchek the use bcmon and load all the scripts properly.
#while loading scripts start.sh is the activation script,warm.sh is the warm up script and stop.sh is the stop script. #
Now scroll down and check the debugging mode.
#Go back to the attack screen and press test monitor mode.
Rfasuccess comes then press OK and press start attack.
#All done,now wait until it finds the routers key for you.
#This worked on my I ball slide 6318i,Alcatel ot 918n and redmi note.
Click to expand...
Click to collapse
Could anyone tell me how to copy bcmon assets files from sd card to data, because all the options says is extract.
Please help meeee...!
Possible Fix for libcap.so.1 problem
By moving "libcap.so.1", "libsqlite3.so.0" from "/data/data/com.bcmon.bcmon/files/libs" to "/system/lib" and setting the wifi-interface in the "Monitor-Mode settings" to "wlan0". I was able to solve the "libcap.so.1" error.
Straight afterwards, I got the "<stdin>[3] : not found" error.
By changing the "start.sh" script from :
Code:
#!/bin/bash
svc wifi disable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
--to--
Code:
#!/bin/bash
svc wifi enable
LD_LIBRARY_PATH=/data/data/com.bcmon.bcmon/files/libs
LD_PRELOAD=/data/data/com.bcmon.bcmon/files/libs/libfake_driver.so sh
cd /data/data/com.bcmon.bcmon/files/tools
./enable_bcmon
echo “rfasuccess”
exit
I was able to pass the "<stdin>[3] : not found" error but now it is stuck on "Waiting for beacon from <Mac Address here>".
I've tried multiple router and waited around 15 minutes on that screen for each router with my phone next to them but it will not get pass that line.
Galaxy s3 i9300 here.
script errors
start.sh, warm.sh and stop.sh are not functioning properly, I am stuck at the same stage as you are and a can't even run the scripts on the terminal emulator.
I have tried granting permissions to the scripts but is is giving errors, if you enable "debug mode", you will see that not even one command is being issued without errors.
BatDroid said:
After this I am able to progress and next see:
Any suggestions?
- HTC One M7vzw
PacMan Rom 5.1.1
Dude..
This is the same error that mentioned in the post
---------- Post added at 08:54 AM ---------- Previous post was at 08:53 AM ----------
find out libcap.so.1 from bcmon assets and put it on system/lib
Click to expand...
Click to collapse
How do I fix the PIE problem? I'm using a Moto E LTE Surnia with CM13.
I cant copy files from extracted folder/asset folder of "bcmon" from any root explorer even from premium root explorer by speedspeed software. Please help me with this. Thank you in advance.
No app in market that can hack wifi password.
Don't waste time.
New wifi routers have WPA 2PSK highest security current time. To crack this type of password may take 2 mintues to many of years depend on which type of character and length have been chosen. All the procedure of cracking password done on linux platform.
In my opinion there are lots of apps on playstore are fake promising to crack wifi password.
Because wifi wpa2psk generate new reandoms keys with 24 or more characters changes with time to time (2-5 sec). And this keys doesn't not save in android in any way. So, how can you say this app hack wifi passwords.
If wifi router has WEP protected security then it can be easily cracked in 2 min any password.