Hello im trying to unlock bootloader watch bbking77 video very helpful helped me last time when i unlocked and then went back to stock img the adroid version is 2.3.4 and still wont unlock again
C:android-sdktools>moto-fast*boot oem unlock … INFOOEM unlock is not implemented
OKAY [ 0.000s] and i have 2.3.4
please help get it unlocked need to put cwm recovery and flash a new radio thanks
Read the unlock part of this post and follow it exactly.
Kevets said:
Read the unlock part of this post and follow it exactly.
Click to expand...
Click to collapse
tried everything giving up on this phone i think its a 100% brick
tried flashing trouth rsd and wont give me unique id and tried everything
Never seen one that wouldn't give up an ID. You flashed the unlock.sbf and rebooted into fastboot? I think the correct key for fastboot is power+ vol down.
Kevets said:
Never seen one that wouldn't give up an ID. You flashed the unlock.sbf and rebooted into fastboot? I think the correct key for fastboot is power+ vol down.
Click to expand...
Click to collapse
the phone says its rooted but when i flash the sbf says fail on rtd lite and on the phone it says" sec_exception: b655,eddc,eb"
Starting RSD protocol suppurt
SVF: 106 : 1 : 2
sec_exception: b655, eddc, eb
then after pausing for a while the RSD lite program on my computer says:
Failed flashing process. Phone [0000]: phone did not re-enumerate after RAM-downloader was sent (0x703E); phone connected.
nikescomputers87 said:
the phone says its rooted but when i flash the sbf says fail on rtd lite and on the phone it says" sec_exception: b655,eddc,eb"
Starting RSD protocol suppurt
SVF: 106 : 1 : 2
sec_exception: b655, eddc, eb
then after pausing for a while the RSD lite program on my computer says:
Failed flashing process. Phone [0000]: phone did not re-enumerate after RAM-downloader was sent (0x703E); phone connected.
Click to expand...
Click to collapse
now says failed to boot1 in rdf doesnt let me flash anyfiles SVF: 106 : 1 : 2
sec_exception: b655, eddc, eb
Let's start over...
Are you sure you're using the correct files? The pack at https://www.box.com/s/92d6ac95e13febbe000d is what I used on a Photon this past weekend with no problems.
Kevets said:
Let's start over...
Are you sure you're using the correct files? The pack at https://www.box.com/s/92d6ac95e13febbe000d is what I used on a Photon this past weekend with no problems.
Click to expand...
Click to collapse
what do u want me to do first can u tell me the way u did it and did yours have failed to boot 1?
I can't read the post at the moment but I followed those instructions exactly, except that you get into fastboot via power and volume down, not up.
Sent from my MB855 using xda premium
You do, but that only brings up the menu. (Yes, we know that fastboot is the first thing that shows in the menu). When you see fastboot from power+vol down, let go and press volume up. It should then say starting fastboot protocol.
Sent from my Magical MoPho using xda premium
JohnH4 said:
You do, but that only brings up the menu. (Yes, we know that fastboot is the first thing that shows in the menu). When you see fastboot from power+vol down, let go and press volume up. It should then say starting fastboot protocol.
Sent from my Magical MoPho using xda premium
Click to expand...
Click to collapse
what happen is i accidentally formatted the partition in recovery twice on accident now only get 2 options fastboot and rsd and it says failed to boot1 tried everything flashing stuff and it wont flash at all i tried every method that was offered is there a way to expand the internal storage back to normal cause i think that's why its not working i really apericate it
I think the 'Compendium' thread has a link to a 2.3.4 SBF. I'm not sure there's any other way.
Sent from my MB855 using xda premium
im getting the same problem. it flashes. then when it tryes to reboot into bp mode the phone turns off and doesnt come back on. i have to pull the batt and hold the power button down while i put the battery back in.
i can get everything to flash and unlock but for the life of me i cannot fix having to pull the battery to boot the phone.
Related
I was following this video on instruction on unlocking my atrix on youtube titled "Motorola Atrix: Unlock and Upgrade to GB - Unlock P1"
My atrix was already updated to 2.3.4
Now Using RSD Lite.. idk what happened, the process failed.. and everytime I turn on my phone, it tells me "OS not found" or something like that.
It says:
SVF:105:1:2
Failed to boot 0x1000
NO OS detected, going to RSD mode in 5 seconds
Press a key to stop count down
Available Modes are:
1.RSD
2. Fastboot
3. NvFlash
4. BP HW Bypass RSD
5. BP HW BYPASS QC DLOAD
6. BP HW Diag & Boot AP
7. BP HW Bypass BP Only
8. BP SW Bypass RSD
9. Android Recovery
10. Boot Android (No BP)
11. Device UID
12 console=ttyS0, 115200n8
13. Early USB Enumeration
14. BP Tools
Can someone please help my get my phone working again.. I can't even live like a day without my phone. Is my phone hardbricked or is there any way to revive it?
Any help would be appreciated.
Thanks
try the next step
Just continue the fastboot commands and you should be fine, same thing happen to me
Sent from my MB860 using XDA App
Javi97100 said:
Just continue the fastboot commands and you should be fine, same thing happen to me
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Which fastboot commands, because I tried to use the ones such
fastboot flash preinstall preinstall.img
fastboot reboot
but nothing worked.
Try this
fastboot oem unlock
(Then it will give you a code, and type it again with code at the end)
Then when phones says unlocked
Type
fastboot reboot
Sent from my MB860 using XDA App
cpatel90 said:
Now Using RSD Lite.. idk what happened, the process failed.. and everytime I turn on my phone, it tells me "OS not found" or something like that.
It says:
SVF:105:1:2
Failed to boot 0x1000
Click to expand...
Click to collapse
Guys, where do you get the courage to do the unlock process that bricked so many phones without reading instructions?
When flashing pudding over OTA 2.3.4, Failed to boot is a common error.
You need to redo the fastboot unlock commands and all will be fine.
This is explained in the pudding thread, and gets explained every day again and again with each new thread that newbies create.
xploited said:
Guys, where do you get the courage to do the unlock process that bricked so many phones without reading instructions?
When flashing pudding over OTA 2.3.4, Failed to boot is a common error.
You need to redo the fastboot unlock commands and all will be fine.
This is explained in the pudding thread, and gets explained every day again and again with each new thread that newbies create.
Click to expand...
Click to collapse
Also if you do some looking around you'll find this http://forum.xda-developers.com/showthread.php?t=1182871 which I think was a SUPER easy way to unlock my bootloader and I didn't run into any of the issues that so many have ran into.
From unlocked/rooted GB Atrix
thanks for the help guys.. but i think its over for my phone.
it doesn't even turn on anymore. the green light comes on for one second and turns back off. i think i'll just have to get a new phone.
cpatel90 said:
thanks for the help guys.. but i think its over for my phone.
it doesn't even turn on anymore. the green light comes on for one second and turns back off. i think i'll just have to get a new phone.
Click to expand...
Click to collapse
You weren't a hard brick. You just didn't complete the steps. Did you do something else to it since your initial post? Sounds like your battery is drained, which means you need to charge it externally.
cpatel90 said:
thanks for the help guys.. but i think its over for my phone.
it doesn't even turn on anymore. the green light comes on for one second and turns back off. i think i'll just have to get a new phone.
Click to expand...
Click to collapse
uhh... sounds like your battery is drained. find someone who can charger your battery (another Atrix owner, or a Droid X owner) and try again PROPERLY.
you were trying to flash PREINSTALL to your phone? that is NOT the OS. that roots your phone once it's already installed. you need to install the SYSTEM.img and related files. you really need to read the entire guide as it so far looks like you didn't read anything.
you need to use moto-fastboot to flash System images, not regular fastboot.
http://forum.xda-developers.com/showthread.php?t=1138092
use these images and this guide, which coincidentally warns you NOT to RSD from the stock 2.3.4 and is stickied at the top of the dev forum.
http://forum.xda-developers.com/showthread.php?t=1160408
i seem to have hard bricked my atrix, doing the same thing.. well, my brother did anyway. but i somehow forced it to download mode. and re-flashed it. Works perfectly.
caleb4992 said:
i seem to have hard bricked my atrix, doing the same thing.. well, my brother did anyway. but i somehow forced it to download mode. and re-flashed it. Works perfectly.
Click to expand...
Click to collapse
that's a soft brick.
svf :105.1:2
failed to boot 0x1000
show this..........
i cant to move it to android recovery cause there no option to move
after showing this error automatically switch off my phone.....
any solution
bivrat said:
svf :105.1:2
failed to boot 0x1000
show this..........
i cant to move it to android recovery cause there no option to move
after showing this error automatically switch off my phone.....
any solution
Click to expand...
Click to collapse
Yea, thats a hard brick
Sent from my MB860 using XDA App
bivrat said:
svf :105.1:2
failed to boot 0x1000
show this..........
i cant to move it to android recovery cause there no option to move
after showing this error automatically switch off my phone.....
any solution
Click to expand...
Click to collapse
bivrat,
You've asked this same thing maybe like 5 times already and each time we've told you that there is no fix and you have to get a new phone.
Need urgent reply
Guys.. i have a favour to ask!
m in a search for a second hand moobile and found this ATRIX 4G unlocked edition which has run into this problem!
"A recent Over The Air upgrade 2.3.6 to the phone (which should have been avoided on a rooted phone) has made the phone non working.
The phone does not boot, and displays the message:
Failed to Boot 1...
Entering RSD Mode."
Guys please let me know if this coud be fixed or not, as i am in a real mood to buy this one!
bivrat said:
svf :105.1:2
failed to boot 0x1000
show this..........
i cant to move it to android recovery cause there no option to move
after showing this error automatically switch off my phone.....
any solution
Click to expand...
Click to collapse
Did you try the Unlock v4.2 app from this site? Option 3 of the menu very well might fix it for you. Well worth a shot if you haven't tried it yet.
I was trying to unlock the BL in my Atrix via Fastboot OEM Unlock, and when that failed I moved on to other, more complicated methods including RSD Lite 5.5 and sbf flashing.
Now when I power up my Atrix I get no logo, just "failed to boot 0x1000
No OS detected, going to RSD mode in 5 seconds."
And literally everything I do will not work. Fastboot does nothing. RSD fails everything, says "Unable to retrieve interface handle (0x7027); phone connected"
When I connect in RSD Mode now, my Atrix shows up as SE Flash Olympus under the Model column, as it did before, rather than the typical NS Flash Olympus.
I'm trying to flash the full 4.5.91 sbf from the IHOP thread that includes an unlocked BL, but it keeps failing.
Edit: It gets to 99% And then says "Switching phone to BP Passthrough mode," but my phone still fails to boot (0x1000) and I have to pick what mode to put it in. I see now it's not BP HW Bypass RSD. Does anyone know?
Did you try to pull the battery and then boot into fastboot (Hold Vol down & Power) and then issue the unlock commands?
Mecharuva said:
I was trying to unlock the BL in my Atrix via Fastboot OEM Unlock, and when that failed I moved on to other, more complicated methods including RSD Lite 5.5 and sbf flashing.
Now when I power up my Atrix I get no logo, just "failed to boot 0x1000
No OS detected, going to RSD mode in 5 seconds."
And literally everything I do will not work. Fastboot does nothing. RSD fails everything, says "Unable to retrieve interface handle (0x7027); phone connected"
When I connect in RSD Mode now, my Atrix shows up as SE Flash Olympus under the Model column, as it did before, rather than the typical NS Flash Olympus.
I'm trying to flash the full 4.5.91 sbf from the IHOP thread that includes an unlocked BL, but it keeps failing.
Click to expand...
Click to collapse
Of course, that's the first thing I did. If it had worked, I wouldn't have a bricked Atrix now. I read somewhere else here on XDA that if your Atrix shows up as "SE" in RSDLite, rather than "NS," you have an Atrix that ATT used to use for testing and support. Not sure how correct that is, but it's possible, considering this is a refurb I bought as a part of the ATT 3rd Party Reseller concession line program. (sub-$50 bill with Unlimited web ftw)
Edit: And now.. for whatever reason, fastboot oem unlock worked. But will my phone boot? It just pops up the M logo, with "Unlocked" in the upper corner. Doesn't appear to be doing anything though.
Edit 2: Now my Atrix shows up as NS in RSDLite. Perhaps there is hope. Flashing the full 4.5.91 sbf from the IHOP thread.
Edit 3: Worked. Now my Atrix is unbricked. Pardon my naivete.
That's quite alright. The only reason I asked is because for people who flash pudding on an Atrix that's already been updated to GB will encounter a "soft brick" in which they need to go through a separate procedure. That's all. Didn't mean to imply you didn't know what you were doing. Glad you got it working.
Mecharuva said:
Of course, that's the first thing I did. If it had worked, I wouldn't have a bricked Atrix now. I read somewhere else here on XDA that if your Atrix shows up as "SE" in RSDLite, rather than "NS," you have an Atrix that ATT used to use for testing and support. Not sure how correct that is, but it's possible, considering this is a refurb I bought as a part of the ATT 3rd Party Reseller concession line program. (sub-$50 bill with Unlimited web ftw)
Edit: And now.. for whatever reason, fastboot oem unlock worked. But will my phone boot? It just pops up the M logo, with "Unlocked" in the upper corner. Doesn't appear to be doing anything though.
Edit 2: Now my Atrix shows up as NS in RSDLite. Perhaps there is hope. Flashing the full 4.5.91 sbf from the IHOP thread.
Edit 3: Worked. Now my Atrix is unbricked. Pardon my naivete.
Click to expand...
Click to collapse
Of course, thanks live.
Ok so apparently I flashed a the kitchen sink rom and when phone booted up it stop and said fail to boot 2 but I flashed the and files in the video from qbking77 and now it says fail to boot 4 can anybody help me please. It the only phone I got and I'm not available for an upgrade till february
Robert5686 said:
Ok so apparently I flashed a the kitchen sink rom and when phone booted up it stop and said fail to boot 2 but I flashed the and files in the video from qbking77 and now it says fail to boot 4 can anybody help me please. It the only phone I got and I'm not available for an upgrade till february
Click to expand...
Click to collapse
What version soft ware did you start with.
the android version ? i was running on 2.3.5 it first said fail to boot 2 and thn after i flashed the sbf file it went to boot 4 do u know how i can fix this
Robert5686 said:
the android version ? i was running on 2.3.5 it first said fail to boot 2 and thn after i flashed the sbf file it went to boot 4 do u know how i can fix this
Click to expand...
Click to collapse
You can't flash custom ROMs with a locked bootloader
Sent from my MB855 using xda app-developers app
Yeah i didnt know that but idk y does the bootloader have to be unlocked cuz i flashed the beats audio one and didnt do this
What sbf did you flash?
Sent from my MB855 using xda app-developers app
mof9336 said:
What sbf did you flash?
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Also having the same issue, I just got root, and I tried to install Jellybean from Jokersax with my battery at 5% which was dumb, but anyways now I get failed to boot 4, I can get it into fastboot protocol support, or rsd mode, and that's it, I've tried to flash some stock files, but no good, I also have a locked bootloader & am on 2.3.5
i flashed the one from qbking77 video i only flashed the one and my batery was drained cuz it wasnt full but the proccess said succes but it went to fail to boot 4 and now it says battery to low to flash but i can get a new battery real quick i jux need to know wat sbf file to flash do u know any that i can flash and would work like i said its the only phone i have and im not available for an upgrade till later and i need my phone
Failed to boot 4 Starting RSD Mode
The Story:
I started having issues with the phone becoming slower and slower and crash prone so i figured this would be a good time to flash an alternate rom. I have had root for some time and i unlocked the boot loader probably about two weeks ago. I had tried a few roms by Th3Bill and i kept having issues so i thought id try to re-lock the boot loader as i couldn't flash any of his roms even with is recovery in place to see if unlocking it again would solve my issue. Also i was running 2.3.4 NOT 2.3.5 so it wasn't due to that.
I just followed the steps outlined here from Link:
Relocking without Full SBF flash
Factory reset phone Menu/Settings/Privacy/Factory Data Reset DO NOT SKIP THIS STEP
Reboot phone into fastboot mode: VOL down/Power. Use VOL down to scroll though options til you see "fastboot" then VOL up to enable. and connect phone to computer
Open command prompt in the moto-fastboot folder and type the following using the <enter> key after each command:
moto-fastboot devices
moto-fastboot erase recovery
moto-fastboot flash recovery stock_recovery.smg
moto-fastboot reboot
Disconnect phone from computer
Start RSD Lite on your computer
Reboot phone into RSD mode: VOL down/Power. Use VOL down to scroll though options til you see "RSD" then VOL up to enable.
Connect phone to computer.
Flash nopudding4u.sbf.
Close RSD Lite and disconnect phone.
Reboot phone
Once i completed the Flash nopuding4u.sbf step it failed giving the status: "Failed flashing process. Failed Flashing process. Phone[0000]: THe "Secure_Motorola_Flash" Interface could not be found. The super-file is secure and for re-flash; the phone needs a super-file that is not secureand not for reflash. (0x7066);Phone connec"
It is not just booting to the first Motorola Dual Core Technology splash screen and showing:
Failed to boot 4
Starting RSD Mode
I've been looking for a solution to the issue for about 30 minutes and have found nothing helpful.
Nopudding4u.sbf relocks your phone, however I would recommend using the 198_7.sbf file instead. U can still unlock with pudding.sbf but you will be able to get back running.. after u flash the stock sbf u will probably need to go into recovery and do a factory reset.
Sent from my MB855 using xda app-developers app
Did you fix,
Tempest_Inc said:
The Story:
I started having issues with the phone becoming slower and slower and crash prone so i figured this would be a good time to flash an alternate rom. I have had root for some time and i unlocked the boot loader probably about two weeks ago. I had tried a few roms by Th3Bill and i kept having issues so i thought id try to re-lock the boot loader as i couldn't flash any of his roms even with is recovery in place to see if unlocking it again would solve my issue. Also i was running 2.3.4 NOT 2.3.5 so it wasn't due to that.
I just followed the steps outlined here from Link:
Relocking without Full SBF flash
Factory reset phone Menu/Settings/Privacy/Factory Data Reset DO NOT SKIP THIS STEP
Reboot phone into fastboot mode: VOL down/Power. Use VOL down to scroll though options til you see "fastboot" then VOL up to enable. and connect phone to computer
Open command prompt in the moto-fastboot folder and type the following using the <enter> key after each command:
moto-fastboot devices
moto-fastboot erase recovery
moto-fastboot flash recovery stock_recovery.smg
moto-fastboot reboot
Disconnect phone from computer
Start RSD Lite on your computer
Reboot phone into RSD mode: VOL down/Power. Use VOL down to scroll though options til you see "RSD" then VOL up to enable.
Connect phone to computer.
Flash nopudding4u.sbf.
Close RSD Lite and disconnect phone.
Reboot phone
Once i completed the Flash nopuding4u.sbf step it failed giving the status: "Failed flashing process. Failed Flashing process. Phone[0000]: THe "Secure_Motorola_Flash" Interface could not be found. The super-file is secure and for re-flash; the phone needs a super-file that is not secureand not for reflash. (0x7066);Phone connec"
It is not just booting to the first Motorola Dual Core Technology splash screen and showing:
Failed to boot 4
Starting RSD Mode
I've been looking for a solution to the issue for about 30 minutes and have found nothing helpful.
Click to expand...
Click to collapse
Hello, did you fix your phone. i am in the same issue now.. please guide me or help me to fix the phone.I have been trying for 3 days,, thanks.
Tried to flash MIUI without unlocking the bootloader
keljoe2804 said:
Also having the same issue, I just got root, and I tried to install Jellybean from Jokersax with my battery at 5% which was dumb, but anyways now I get failed to boot 4, I can get it into fastboot protocol support, or rsd mode, and that's it, I've tried to flash some stock files, but no good, I also have a locked bootloader & am on 2.3.5
Click to expand...
Click to collapse
It is was initially stuck on failed to boot 2 and Starting RSD mode. Then I used RSD lite to flash the stock sbf, and my computer went to sleep in the middle of the flash and failed. Now it is stuck on Failed to boot 4, Starting RSD mode, Battery is too low to flash.
I am not in the US right now, so cannot take it to the Sprint store. PLEASE HELP!!!
I am having a problem. I was trying to upgrade to Jelly bean 4.1 on this Atrix 4g. I tried to go through the steps that it gave online with the CM10 n Cyro and all. Long story short it couldn't find the rom within the zip or something of that nature. In other words, it screwed me over. I can't get back into recovery. It's been giving me this error:
SVF 108:1:2
Failed to boot 3
Starting RSD mode
Before it was giving me just:
Failed to boot 4
Starting RSD mode
I had tried reseting to factory through the moto-fastboot but of course it failed. I have been tryin like crazy to flash various SBF from 2.3.5 to 2.3.6. I was originally at 2.3.6 but for what ever reason when I try the RSD lite it gives me the error after it executes "Phone did no re-enumerate after RAM downloader was sent". (0x703e). I have been reading forums literally all day. Perhaps I am not understanding something therefore I am missing it but maybe one of you guys could help me out with this? Maybe there is a real simple fix or maybe I completely ruined it? Either way it would be nice to get some help on this. Basically when I was trying to upgrade to 4.1 I followed "How to upgrade the Atrix 4G to Android 4.1.1 Jelly Bean via CyanogenMod 10" off of the androidauthority website. I got to step 9 but it couldn't find the ROM, by then it was too late.
UPDATE: So I got just that and RSD was flashing it until it reached yet another error:
failed flashing process. Failed flashing process. Phone[0000]: error switching phone BP pass through mode (0x70BE); phone disconnected.
Help?
majorrazer said:
Help?
Click to expand...
Click to collapse
I'm no expert, you can wait for an expert response but what i couldnt understand is why you try to flash a SBF. The manual you refer to is a CWM based installation, with a zip file, not a SBF.
So do you have CWM recovery flashed? Do you have the related zip file downloaded to sdcard?
saldirai said:
I'm no expert, you can wait for an expert response but what i couldnt understand is why you try to flash a SBF. The manual you refer to is a CWM based installation, with a zip file, not a SBF.
So do you have CWM recovery flashed? Do you have the related zip file downloaded to sdcard?
Click to expand...
Click to collapse
I don't have anything flashed at the moment. I can't boot into anything at the moment. I am confused perhaps with what will solve my problem.
majorrazer said:
I don't have anything flashed at the moment. I can't boot into anything at the moment. I am confused perhaps with what will solve my problem.
Click to expand...
Click to collapse
Do you have an unlocked bootloader? Does the word "Unlocked" appear when you power the phone on? You must have an unlocked bootloader for sure. IF not, you must unlock it.
his is the guide you were following;
http://www.androidauthority.com/atrix-4g-mb860-android-4-1-1-jelly-bean-cyanogenmod-10-cm10-106639/
As said there, it requires unlocked, rooted Atrix with with ClockworkMod Recovery installed
I guess you can still unlock the bootloader and install cwm recovery. Just search and find instructions.
HEY
i have the same problem also.... and the same error...
is your phone fix already?
could you tell me how?
SVF: 108:failed to boot 3 starting RSD mode
Hi,
I have Atrix 4G AT&T, last night rooted it and from recovery mode install custom rom cm-7.2.0-olympus after reboot its not booted and showing "SVF: 108:failed to boot 3 starting RSD mode". Removing battery also not solve this problem, Andriod recovery mode also not working by pressing down volume key on restarting. RSD Lite procedure also not working for my phone. RSD Lite 5.6 or other versions (i tried most of all) also not deducted my phone when i connected to PC in Fastboot mode. I m new and have not to much information about software version of this Motorola Atrix 4G but before its bricking mode it was on Gingerbread 2.3.6.
I have also tried "cmd prompt" stock frame version and other procedures but all failed to start my Phone to normal.
salimdawar said:
Hi,
I have Atrix 4G AT&T, last night rooted it and from recovery mode install custom rom cm-7.2.0-olympus after reboot its not booted and showing "SVF: 108:failed to boot 3 starting RSD mode". Removing battery also not solve this problem, Andriod recovery mode also not working by pressing down volume key on restarting. RSD Lite procedure also not working for my phone. RSD Lite 5.6 or other versions (i tried most of all) also not deducted my phone when i connected to PC in Fastboot mode. I m new and have not to much information about software version of this Motorola Atrix 4G but before its bricking mode it was on Gingerbread 2.3.6.
I have also tried "cmd prompt" stock frame version and other procedures but all failed to start my Phone to normal.
Click to expand...
Click to collapse
Did you unlock the bootloader the right way?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Did you unlock the bootloader the right way?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Not fully under stand "unlock bootloader" the right way? As mention earlier i m not an expert or more knowledge about Rooting and hacking of Andriod Phones, Please tell me in Details, thanks
salimdawar said:
Not fully under stand "unlock bootloader" the right way? As mention earlier i m not an expert or more knowledge about Rooting and hacking of Andriod Phones, Please tell me in Details, thanks
Click to expand...
Click to collapse
did you flash pudding sbf via rsd and use fastboot to oem unlock?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
did you flash pudding sbf via rsd and use fastboot to oem unlock?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
No i didnt use RSD methode because RSD Lite not deducting my Phone, tried different versions of RSD for flash pudding, I have Windows 8-64bit.
Also Flash the Mobile throw following procedure
Boot the Atrix into “Fastboot Mode” (hold power + vol down)
plug your Atrix into your PC via USB
Navigate to your fastboot folder via command prompt
type “moto-fastboot flash boot boot.img” press enter
type “moto-fastboot flash system system.img” press enter
type “moto-fastboot -w” press enter
type “moto-fastboot reboot” press enter.
But it also not Boot my phone in normal, Its stuck in Start menu,
SVF 108:1:2
Failed to boot 3
Starting RSD mode
salimdawar said:
No i didnt use RSD methode because RSD Lite not deducting my Phone, tried different versions of RSD for flash pudding, I have Windows 8-64bit.
Also Flash the Mobile throw following procedure
Boot the Atrix into “Fastboot Mode” (hold power + vol down)
plug your Atrix into your PC via USB
Navigate to your fastboot folder via command prompt
type “moto-fastboot flash boot boot.img” press enter
type “moto-fastboot flash system system.img” press enter
type “moto-fastboot -w” press enter
type “moto-fastboot reboot” press enter.
But it also not Boot my phone in normal, Its stuck in Start menu,
SVF 108:1:2
Failed to boot 3
Starting RSD mode
Click to expand...
Click to collapse
ok so its telling you what to do. Since you haven't flashed a sbf, chances are you are not unlocked, so how do you expect to flash anything on a locked device?
Did you install motorola device manager for the drives?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
ok so its telling you what to do. Since you haven't flashed a sbf, chances are you are not unlocked, so how do you expect to flash anything on a locked device?
Did you install motorola device manager for the drives?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Yes already install this file from Net
"Motorola_End_User_Driver_Installation_5.1.0_64bit "
and not expect any thing else about flashing of my device.
Before Motorola Atrix 4G, i were used in passed Samsung S1, S2, S3, & T989 (T-Mobile S2 version). All these andriod sets were very easily hack or Root and can install Roms easily .
But Moto Atrix 4G can me upset and sad.
kindly help me to re-connect my self to the andriod world by this Motorola Atrix 4G, thanks
Hey guys I'm having trouble getting to RSS mode my phone comes on then it says entering nv flash recovery mode then the phone dies so I need help trying to get into my phone to flash the sbf file
Sent from my GT-N7105 using XDA Premium 4 mobile app
Need Help regarding Motorola Atrix Mb 861.
salimdawar said:
No i didnt use RSD methode because RSD Lite not deducting my Phone, tried different versions of RSD for flash pudding, I have Windows 8-64bit.
Also Flash the Mobile throw following procedure
Boot the Atrix into “Fastboot Mode” (hold power + vol down)
plug your Atrix into your PC via USB
Navigate to your fastboot folder via command prompt
type “moto-fastboot flash boot boot.img” press enter
type “moto-fastboot flash system system.img” press enter
type “moto-fastboot -w” press enter
type “moto-fastboot reboot” press enter.
But it also not Boot my phone in normal, Its stuck in Start menu,
SVF 108:1:2
Failed to boot 3
Starting RSD mode
Click to expand...
Click to collapse
I need your help regarding Motorola Atrix Mb 861. My phone is not boot and show..
SVF: 108:1:2, Failed to boot 3
Starting RSD mode.
also not able to hard reset. My phone detail are.
My model is KT Atrix MB861
Not sure which is the build number
s/w version: 4.5.2A-KT-75
Android version: 2.3.4
Kernel version: 2.6.32.9-00001...
Please Help regarding that matter.....
kamal.navigator said:
I need your help regarding Motorola Atrix Mb 861. My phone is not boot and show..
SVF: 108:1:2, Failed to boot 3
Starting RSD mode.
also not able to hard reset. My phone detail are.
My model is KT Atrix MB861
Not sure which is the build number
s/w version: 4.5.2A-KT-75
Android version: 2.3.4
Kernel version: 2.6.32.9-00001...
Please Help regarding that matter.....
Click to expand...
Click to collapse
Were you bootloader unlocked before getting this message?
after flashing 1FF-sunfire-user-2.3.5-4.5.1A_SUN_USC_19.0-19-release-keys-signed-USC-US i get failed to boot 4
tried http://androidforums.com/4545287-post3.html with no rezult
tried to flash SBF: 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US , rds lite 5.6 writes - waiting for re-enumeration,
phone writes - svf : 106:1:2 sec_exeption: b655, eddc, eb
plus nothing hepens when i try to power on phone with vol-, vol+ and both keys
i have already delete rsd and drivers and reinstall them
please help me
you cant flash 2.3.4 on a phone with 2.3.5. it does not work. not sure where to start but can you get to fastboot or rsd mode?
---------- Post added at 07:59 PM ---------- Previous post was at 07:49 PM ----------
also was your bootloader unlocked? any customizations at al re.....recovery or rom etc....can you give a lttle more info.
If I understand correctly you are no longer able to get to rsd mode (power and vol +) when booting correct? If so you are pretty much S.O.L. When you flashed the 2.3.4 sbf it tried to revert your locked bootloader back to 2.3.4 which is a no-no on a locked 2.3.5. Your best bet is to start coming up with a good excuse and take it back to sprint.
Truely need more info. I just a week ago did the same thing to an electrify. I at this time cant tell you the exact steps i took took fix it but it can be fixed. You are not completly screw as of yet and if you look around you will find all you need to fix this but it comes from different sources and some of the info was for different phones but worked on the photon which made it work on the electrify.
Like i said the given info is not enough to give you what you need to do and although the mopho and electrify are similar in almost every way there are a few things that differ.
I dont believe that your "S.O.L." because i just did the same thing and brought it back.
Open a command prompt as administrator and plug your phone into you computer and see if its recognized by fastboot or adb or rsd lite.
hoslayer13 was helping me with this issue and had a lot of info that helped. maybe he will chime in who knows.
More info!!!!!
After the phone says failed to boot 4 if you leave it at that screen for about a minute does it say "starting rsd mode" under failed to boot 4? If so your best bet would be to follow the steps here: (http://forum.xda-developers.com/showthread.php?t=1798145) as long as you originally started with a Photon running 2.3.5. I you can flash via rsd, make sure you remove your sd and sim card. For some reason it seams to work better. Also plug the USB cable directly to the computer (no hubs, no usb extension cables) they can cause issues with rsd. I hope you've already resolved the issue and I'm giving you advice you don't need.
@ rhewins2268. That is exactly the reason I asked "If I understand correctly you are no longer able to get to rsd mode (power and vol +) when booting correct?" If he can boot to rsd then the link I provided is a fix. Which by the looks of it may be what he was trying to do in the first place considering the electrify sbf he mentions is the first step in bringing a Photon back to stock, or back from a soft brick. You are correct more info would be helpful, but by reading what he did it sounds like more than likely he was on 2.3.5 which is an unlock-able bootloader (for the time being) and trying to downgrade (SBF: 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US) on a locked 2.3.5 bootloader can and more than likely will perma brick the photon. If when booting he can not see the boot options, i.e. fastboot, android recovery, rsd mode etc. he's bricked. There is no way to flash anything if the device has no, or a corrupted bootloader to start those processes.