JB 4.1.2 leaked root and CWM ready - Galaxy S II Q&A, Help & Troubleshooting

Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.

sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1998205
has su binary but not sure about superuser app. I think its the stock kernel but I'm not sure... you can do this if its needed but maybe not needed http://forum.xda-developers.com/showthread.php?p=34180283#post34180283
I mention that because if you want to avoid the yellow triangle and have a kernel that flashes things you can use Mobile Odin or extract the zImage and use hc-ktool to flash the below kernel.
Kernel for flashing; no CWM app though, so need to hold power home and volume up on boot: http://forum.xda-developers.com/showthread.php?t=1877270

sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
You're obviously also too lazy to search.
Just use Mobile Odin via your mobile, it will also re-root and inject SU etc anyway.

sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
Just used odin 3.07 to flash the fw,or mobile odin, with everroot on it.
http://download.chainfire.eu/267/SuperSU/CWM-SuperSU-v0.97.zip after you flash the fw downlod this zip rename it to update.zip place it to your sdard apply update to the recovery(stock)apply update to externalstorage.done you are rooted or flash phils kernel.
Sent from my GT-I9100 using xda premium

sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
There is one rooted version available which i downloaded ... I dont remember the thread though .. U have to search
Sent from my GT-I9100 using Tapatalk 2

Thread closed
sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
This is the wrong forum to admit you're too lazy to do your own work.

Related

Need Help fast. Mini usb port died. Need to unroot.

Is there s way for me to unroot this phone without the usb port?
Any takers on this issue? Or should I run the battery dead.
I have a stock rom on it but its rooted. Everything looks stock but it has superuser in the apps menu.
Use rootexplorer to delete SU app. Then download the siyah kernel cwm flashable zip. Replace the zimage inside with a stock one. Transfer it to your phone using Bluetooth. Flash it in recovery.
Once you reboot, you should be unrooted and having a stock kernel.
Sent from my GT-I9100 using Tapatalk
Thanks you are a life saver.
where do i get the siyah kernel cwm flashable zip?
DevilStrider said:
where do i get the siyah kernel cwm flashable zip?
Click to expand...
Click to collapse
http://www.gokhanmoral.com/gm/wp-content/uploads/2011/11/Siyah-v2.2beta6-CWM.zip
can I get the zimage off my phone or is it on the net? Also do I just find superuser and delete it or is there a uninstall?
DevilStrider said:
can I get the zimage off my phone or is it on the net?
Click to expand...
Click to collapse
Which stock firmware were you using? The zimage is available inside the tar file. Extract it using winrar.
I have the same problem that i highlighted in the thread below
http://forum.xda-developers.com/showthread.php?p=18614955#post18614955
I have been looking for the Stock Rom in a ZIP format so that i can flash it via Recovery.
Can anyone guide us on how to convert the STOCK ROM to a ZIP Format?? Android 2.3.4 version for Samsung Galaxy S2. I am sure there is a way as i have seen the zip files for other phones.
PLEASE HELP!!
EDIT: Thank you Silesh. I will try this out tonight. Many thanks.
RohitSGS2 said:
I have the same problem that i highlighted in the thread below
http://forum.xda-developers.com/showthread.php?p=18614955#post18614955
I have been looking for the Stock Rom in a ZIP format so that i can flash it via Recovery.
Can anyone guide us on how to convert the STOCK ROM to a ZIP Format?? Android 2.3.4 version for Samsung Galaxy S2. I am sure there is a way as i have seen the zip files for other phones.
PLEASE HELP!!
Click to expand...
Click to collapse
I can make one for you. But you will have to be rooted with a insecure kernel to flash it using cwm. After flashing it, you should be as good as stock.
It's not giving me a uninstall tab. It's giving me a install tab in root explorer
sileshnair said:
Which stock firmware were you using? The zimage is available inside the tar file. Extract it using winrar.
Click to expand...
Click to collapse
Is that the kernal version?
DevilStrider said:
It's not giving me a uninstall tab. It's giving me a install tab in root explorer
Click to expand...
Click to collapse
Long press on the Superuser.apk and delete. You may also have to delete the su binary and busybox to remove any signs of rooting.
Ok superuser is gone. Now to figure out this flash.
DevilStrider said:
Is that the kernal version?
Click to expand...
Click to collapse
No buddy. What did you exactly do to your phone to get it to the present state?
Did you flash any firmware using Odin? How did you root?
Also dial *#1234# and let me know the result.
I see the zimage in the siyah kernel cwm but I' having trouble finding a stock zimage
sileshnair said:
No buddy. What did you exactly do to your phone to get it to the present state?
Did you flash any firmware using Odin? How did you root?
Also dial *#1234# and let me know the result.
Click to expand...
Click to collapse
I flashed a kernal a while back to root and then flashed right back to stock and the root stayed. Also I dialed *#1234# and nothing happened.
sileshnair said:
I can make one for you. But you will have to be rooted with a insecure kernel to flash it using cwm. After flashing it, you should be as good as stock.
Click to expand...
Click to collapse
I am currently rooted and on Sensation ROM 1.8 using Siyah Kernel v 2.0
I would be very grateful if you can make a zip file for XXKI3 (2.3.5) or XXKH3 (2.3.4).
Thank you very much.
I can't find out what stock firmware I have. It's the stock one that came on the phone though.

Enquiry about ROOT for Galaxy SIII

Dears,
I would like to ask how to root my Samsung SIII with stock rom. Just wish to that the mobile device is smoother, battery efficient and power saving. I read some thread and slightly understand the step, first download ODIN and install it into pc. Second, put CF-ROOT into the TAR column. Meanwhile, I also found FRANCO for kernel. So, what should I do??
The other things will be, the same stuff above can be use in Samsung galaxy SII as well?
Thanks and pending the response.
peterlsc said:
Dears,
I would like to ask how to root my Samsung SIII with stock rom. Just wish to that the mobile device is smoother, battery efficient and power saving. I read some thread and slightly understand the step, first download ODIN and install it into pc. Second, put CF-ROOT into the TAR column. Meanwhile, I also found FRANCO for kernel. So, what should I do??
The other things will be, the same stuff above can be use in Samsung galaxy SII as well?
Thanks and pending the response.
Click to expand...
Click to collapse
Yeah pal use cf root here:
http://forum.xda-developers.com/showthread.php?t=1695238
Read instructions properly in 2nd post it very simple method
Sent from my GT-I9300 using xda app-developers app
Install odin
Download cwm recovery for your phone model
Flash it with pda button in odin
Then press volume up and power button to go recovery mode
Then install superSU with install zip from sdcard option
Done.
You can set root privilages in supersu program
*search more carefully and do it with your responsibility
*personally i dont prefer root because official updates wont install anymore. I once rooted then flashed to stock
Sent from my GT-I9300 using xda app-developers app
U can go back to complete stock anyway by flsshing your official firmware from sammobile.com. u will need triangle away also as your system status will still say MODIFIED.
Sent from my GT-I9300 using xda app-developers app
amour1991 said:
Install odin
Download cwm recovery for your phone model
Flash it with pda button in odin
Then press volume up and power button to go recovery mode
Then install superSU with install zip from sdcard option
Done.
You can set root privilages in supersu program
*search more carefully and do it with your responsibility
*personally i dont prefer root because official updates wont install anymore. I once rooted then flashed to stock
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
however, with the stock rom but modified kernel also will affect the normal update??
peterlsc said:
however, with the stock rom but modified kernel also will affect the normal update??
Click to expand...
Click to collapse
Not sure i understand 100% but flashing cfroot will alter your binary counter, hence change device status to modified yes.
Sent from my GT-I9300 using xda app-developers app
Maybe a video guide is better for you
http://www.youtube.com/watch?v=59UNMwCts3Y&feature=related
Using CF root you will still be able to get official updates through Kies no problem, u just need to run cf root again after an official update. OTA updates I dont use anyway but just to be safe dont try and install OTA updates as the usually seem to fail. If the phone notifies u of a ota update just hook up kies and get it.
If you plan to install other root kernels I cant advice as I only use cf root.
CF-Root is a stock-kernel with Root enabled, so if you want to increase "smoothness" and battery saving, then you're on the wrong kernel since it behaves exactly like stock.
I can recommend Siyah kernel. You don't even need to use CF-Root to root your device before, since it already comes with a Odin-flashable version and auto-installs root.
d4fseeker said:
CF-Root is a stock-kernel with Root enabled, so if you want to increase "smoothness" and battery saving, then you're on the wrong kernel since it behaves exactly like stock.
I can recommend Siyah kernel. You don't even need to use CF-Root to root your device before, since it already comes with a Odin-flashable version and auto-installs root.
Click to expand...
Click to collapse
Cf root is NOT a kernel it just pushes supersu, cwm and cwm manager to your device
Sent from my GT-I9300 using xda app-developers app
laneyofdeath said:
Cf root is NOT a kernel it just pushes supersu, cwm and cwm manager to your device
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
The same CF-ROOT can be use is Samsung Galaxy SII too?? Ya ... I understand CF-ROOT is added in CWM, SuperUser and even Titanium Backup to ur device. Meanwhile, the franco kernel is with voodoo sound system. Btw, what are those official download or OTA that you all mentioned above.
thanks.
peterlsc said:
what are those official download or OTA that you all mentioned above.
thanks.
Click to expand...
Click to collapse
OTA means over the air..which again means you will get a notification saying you have a software update ...when you click on it will download the update file and update your phone without connecting to PC..other way is you connect to PC open Kies..download the update in Kies and update your phone..
zoot1 said:
OTA means over the air..which again means you will get a notification saying you have a software update ...when you click on it will download the update file and update your phone without connecting to PC..other way is you connect to PC open Kies..download the update in Kies and update your phone..
Click to expand...
Click to collapse
Let say, I would like to have stock ROM and with FRANCO kernel.. It is possible and how should I do it??
Thanks..
peterlsc said:
Let say, I would like to have stock ROM and with FRANCO kernel.. It is possible and how should I do it??
Thanks..
Click to expand...
Click to collapse
Flash franco kernel via Odin .
If that kernel is available in Odin format tar file .
jje
peterlsc said:
Let say, I would like to have stock ROM and with FRANCO kernel.. It is possible and how should I do it??
Thanks..
Click to expand...
Click to collapse
I think it would work...just read the OP..it will state with which ROMs it works..it it says Stock then you can flash it...anyways take a nandroid backup..so you can revert back if anything goes wrong.
zoot1 said:
I think it would work...just read the OP..it will state with which ROMs it works..it it says Stock then you can flash it...anyways take a nandroid backup..so you can revert back if anything goes wrong.
Click to expand...
Click to collapse
I don't think he is rooted so nandroid isn't possible
zoot1 said:
I think it would work...just read the OP..it will state with which ROMs it works..it it says Stock then you can flash it...anyways take a nandroid backup..so you can revert back if anything goes wrong.
Click to expand...
Click to collapse
Edit: If you are not rooted..then follow the steps mentioned by JJE..i hope everything goes fine..but if i were you mate i would have rooted and made a backup before playing with my hard earned money :fingers-crossed:..just in case.....
JJEgan said:
Flash franco kernel via Odin .
If that kernel is available in Odin format tar file .
jje
Click to expand...
Click to collapse
How do I backup all the stock stuff such as ROM, kernel or even those Stock files... Just in case any thing goes wrong that I can still flash to the stock version...
thanks.
*The same FRANCO tar's file can use in Samsung Galaxy SII too??
peterlsc said:
The same CF-ROOT can be use is Samsung Galaxy SII too?? Ya .
NO its a different phone use the correct CF root for the phone .SGS2 forum is where to start .
. I understand CF-ROOT is added in CWM, SuperUser and even Titanium Backup to ur device.
NO TB does not have root but it requires root to run .
jje
Click to expand...
Click to collapse
I think you should read more before you ruin your phone. I would start reading the cf root thread. I would root with cf first then make a nandroid backup in recovery. Then from there you can flash whatever you like i.e kernels, ROMS.
Sent from my GT-I9300 using xda premium

How can i root this s2 ?

GT-I9100
android 4.0.4
i9100BVLPE
3.0.15-9100BVLPH
How can i root this?
Have you tried searching?
Look for rachmat3's method. Safest and simplest one around.
Sent from my GT-I9100 using xda app-developers app
By installing su/busybox or by flashing a rooted kernel......lol
theunderling said:
By installing su/busybox or by flashing a rooted kernel......lol
Click to expand...
Click to collapse
Dosen't work your root ics from signature..
RobyRc said:
Dosen't work your root ics from signature..
Click to expand...
Click to collapse
dwnld and flash the .tar file of siyah kernel v4.1.5 from odin, ur phone will be rooted
Sun90 said:
dwnld and flash the .tar file of siyah kernel v4.1.5 from odin, ur phone will be rooted
Click to expand...
Click to collapse
I'm not at home,so i can't do this..any ideea without odin?
RobyRc said:
Dosen't work your root ics from signature..
Click to expand...
Click to collapse
It can be a bit tempremental,but it works.Download a siyah kernel for now(say v.4 in .zip form).
Then
Boot into stock recovery.....
Run rachmats cwm.zip(which is temporary cwm).Use the touch facility to scroll.
Then run the su/busybox.zip file.
Dont reboot,then flash the siyah.zip file.
That should be you rooted (with permanent cwm)and with safe kernel.
theunderling said:
It can be a bit tempremental,but it works.Download a siyah kernel for now(say v.4 in .zip form).
Then
Boot into stock recovery.....
Run rachmats cwm.zip(which is temporary cwm).Use the touch facility to scroll.
Then run the su/busybox.zip file.
Dont reboot,then flash the siyah.zip file.
That should be you rooted (with permanent cwm)and with safe kernel.
Click to expand...
Click to collapse
siyah kernel v4
I can't find it..:-s
RobyRc said:
siyah kernel v4
I can't find it..:-s
Click to expand...
Click to collapse
If you can't find the 4.1.5 version of Siyah kernel, then you shouldn't be rooting your phone.
Jokes aside
http://forum.xda-developers.com/showthread.php?t=1555259
Something like siyah-s2-v4.0.1-cwm.zip.
I only quoted v4 so you would know roughly which one to go for.
The main thing is to get a safe kernel with permanent cwm.
why go hungry when you can be spoon fed

root xxlsj???

how to root leaked xxlsj 4.1.2 for s2??
gdstheking said:
how to root leaked xxlsj 4.1.2 for s2??
Click to expand...
Click to collapse
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Sun90 said:
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Click to expand...
Click to collapse
what about "Siyah-s2-v4.1.5"???
i flashed using philz kernal but no supersu >>??
Why not make a 3rd thread about that......you might get lucky.
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
given give a download link for supersu for philz kernel
Youu will not get root access if you flashed it via odin, download cmw version of it and.flash
Sent from my GT-I9100 using xda premium
philz kernel
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
droid_s2 said:
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
Click to expand...
Click to collapse
Here is the link bro sorry for late reply btw thanks for your thanks
http://forum.xda-developers.com/showthread.php?t=2031042
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
aboalghool said:
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
Click to expand...
Click to collapse
Yeah after flashing the firmware via odin ur phone will be unrooted
That 'exynos exploit' by 'chaingire' can also be used to root XXLSJ in just one click, without any flashing etc.
Sent from my GT-I9100 using xda premium
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
match_stick said:
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
Click to expand...
Click to collapse
When u flashed that leaked firmware, ur phone was already in stock but with TW 5 unrooted condition.
Secondly, for that triangle problem....Use the 'triangle away' app from play store.
Also, if u want official update then for few weeks more :/
Sent from my GT-I9100 using xda premium
Cool. I've heard some stories of hardbrick when using that app... but will most likely wait for the official update
sent from the unknown

how to root BaseBand XXELLA galaxy s3

hi guys..
i am old s2 user in forum but new to s3 section as i just bought s3 after my s2 fell down and got its lcd broken.
so its 4.1.2 officially updated.it is xxella and built is xxellb so i want it to root.so what steps should i follow to root it.
would be thankful to those who will reply it.thanks.
Chainfire's CF-Auto-Root:
http://forum.xda-developers.com/showthread.php?t=1957273
Or CF-Root:
http://forum.xda-developers.com/showthread.php?t=1695238
Helpful Thread:
http://forum.xda-developers.com/showthread.php?t=1911726
coax ydramplo
komjin said:
Chainfire's CF-Auto-Root:
http://forum.xda-developers.com/showthread.php?t=1957273
Or CF-Root:
http://forum.xda-developers.com/showthread.php?t=1695238
Helpful Thread:
http://forum.xda-developers.com/showthread.php?t=1911726
Click to expand...
Click to collapse
Hi Xda!! I have a problem with odin stuck at get pit for mapping and I'm running on Android 4.1.2 XELLA and really want to root my phone
why did you tick "re-partition"?
Not tick re-partition
Glebun said:
why did you tick "re-partition"?
Click to expand...
Click to collapse
The re-repartition was not ticked but odin stuck at get pit for mapping :,-(
interesting. what file did you flash? does the phone work?
cf root 6.4
Glebun said:
interesting. what file did you flash? does the phone work?
Click to expand...
Click to collapse
The file is cf root 6.4 Thanks for the reply.
and the second question?
yes it's work perfectly
Glebun said:
and the second question?
Click to expand...
Click to collapse
Yes it's a great chance that the phone is still working but don't know how to root it cause odin stuck at get pit for mapping
Is the phone working after the failed flash, or not?
you can also flash cwm recovery(only) from odin separately and then superuser.zip from that recovery.
sent from my GT-I9300 running CM10.1 RC4.1 by Temasek
_PR3DATOR_ said:
Yes it's a great chance that the phone is still working
Click to expand...
Click to collapse
you didn't try turning it on?
ok thanks I will try to flash cwm recovery
sriram231092 said:
you can also flash cwm recovery(only) from odin separately and then superuser.zip from that recovery.
sent from my GT-I9300 running CM10.1 RC4.1 by Temasek
Click to expand...
Click to collapse
Hope it not brick my phone by Flash the cwn recovery (it sounds like ics method)
Ok then thanks for the reply and i would like to have the link to download superuser.zip
_PR3DATOR_ said:
Hope it not brick my phone by Flash the cwn recovery (it sounds like ics method)
Ok then thanks for the reply and i would like to have the link to download superuser.zip
Click to expand...
Click to collapse
a very small google search can get you that buddy anyways here's one of the links: http://helpitbd.blogspot.in/2013/04/root-samsung-galaxy-s3-with-cwm.html
_PR3DATOR_ said:
Hope it not brick my phone by Flash the cwn recovery (it sounds like ics method)
Ok then thanks for the reply and i would like to have the link to download superuser.zip
Click to expand...
Click to collapse
you didn't answer
ok big thanks both of you
Glebun said:
you didn't answer
Click to expand...
Click to collapse
My phone still working it turns on all good god bless and hope my phone will not brick cause I know what it is. I have bricked my galaxy note several times and the last time was really bad cause I have done with factory reset and it hard bricked. The Galaxy s3 is an amazing phone love it so much I really want to gain best out of it too. I'm running on jelly bean XELLA 4.1.2 for a while now I want 4.2.2 jelly bean, but before I have to root this jelly bean 4.1.2 XELLA
no, you don't have to root to install 4.2.2
it cause I love custom rom
Glebun said:
no, you don't have to root to install 4.2.2
Click to expand...
Click to collapse
I love android cause you feel free with it and I love xda developers for their works thanks and I really want to flash a custom rom cwm recovery method not odin.... so tell me what should I do to root my galaxy s3 xella 4.1.2? please
again, you don't need to root your phone for that. flash a recovery through Odin.
really interesting
Glebun said:
again, you don't need to root your phone for that. flash a recovery through Odin.
Click to expand...
Click to collapse
So I flash cwm recovery via odin and then flash a custom rom with cwm?? Wow nice

Categories

Resources