Related
So, quick backstory. I have two PC's at home. A brand new win 7 64 bit laptop, and an older XP desktop. Neither will recognize my vibrant, and never have. At work, I have a win XP desktop, and I can connect the phone to that and use mass USB storage and move stuff around just fine, so I've gotten by in that regard in these 6 long months.
Then comes this #$%%^$#$ Froyo update. Who thought it would be easy?
I have downloaded kies on each machine. (As well as ODIN, but same issues.....computer/phone wont communicate). I cannot get my two home computers to connect to the phone, no matter what settings. BTW, I have rooted my phone with OCLF and subsequently un-rooted before trying any of the following. I have not flashed or updated the phone otherwise with any other software, other than what apps are available in the market.
I've tried
-USB Debugging on/off
-all 10 USB ports between the three PC's in all configurations
-deleted all USB drivers and restarted on both computers
-installed the appropriate drivers from samsung for each pc
-wasted 7 hours with samsung support troubleshooting to no avail
The USB cable is fine. The most promising progress is on my work PC, where I got Mini Kies going, connected and started the update, it finished decompressing the binary files, but then a USB not recognized warning pop up and kies kicked out the update.
I have installed, reinstalled the drivers for each system several times with samsung support. Nothing is working.
I don't know what else to do. This is the most frustrating experience in my life. Any suggestions or similar experiences that have been remedied?
I was having promblems also but eventually got it to work for me on an xp machine on stock jfd. It updated me to ji6 then I did the ka6 update when it was released. I gave up on my win7 system lol. Is your xp system 32bit or 64?
Sent from my SGH-T959 using XDA App
same here i have a win7 64 bit machine, i can connect to normal kies 1.51. i tried to update, it downloaded the files and just got stuck when it started putting it on the phone (luckily, it did not start the installation so i was okay).
mini kies shows that it recognizes my phone but crashes immediately after that.
i do not think the vibrant is supported by newer versions of kies, like 2.0.
I solved my problem by using my 32bit xp system.
edit: just FYI, i can connect to normal kies 1.51, sync my data and all that stuff. i also updated to ji6 thru normal kies, and I can transfer files and whatnot thru usb. I do not even think i needed to install the drivers manually
I downloaded Mini Kies 2.0 onto my windows 7 64bit machine and installed the Samsung drivers I have everything worked smoothly. I upgraded 3 phones to Froyo with no issues. here are the drivers I have
http://71.228.63.153/download/usb_drivers_GalaxyS_x64.zip
toeshot said:
I downloaded Mini Kies 2.0 onto my windows 7 64bit machine and installed the Samsung drivers I have everything worked smoothly. I upgraded 3 phones to Froyo with no issues. here are the drivers I have
http://71.228.63.153/download/usb_drivers_GalaxyS_x64.zip
Click to expand...
Click to collapse
I did the Same thing it worked for me as well
The only luck I've had is on a winXP 32 bit machine, but then it cuts off the installation when it suddenly says "USB Not Recognized" (despite, um, the fact that it recognized it at the beginning, otherwise I wouldn't have been able to initiate the update!)
I'll give those Win7 64 drivers a try at home, although I'm pretty sure I have downloaded the same ones in my quest for a solution.
Do you suggest plugging in the phone, then installing the drivers, or leaving the phone unconnected and restarting the computer then trying to connect, or ???? The biggest issue on the Win7 machine is the phone not communicating with it AT ALL. Not even showing up in device manager as unknown or anything.
Moved of: Samsung Vibrant > Vibrant General
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
SOLVED
I finally got it to work, after about 15 attempts! (on a win XP machine)
Here's what I did in case it will help someone else:
When I plugged in my phone, I saw two items in the USB list in device manager. One said "Samsung Android USB Composite Device" (internal SD?), and the other said "USB Mass Storage Device" (external SD?). In this configuration, I got kicked out of the install each time after it "decompressed the binary files".
So what I did on a hunch was go to the device manager and "update" the driver for the USB Mass storage device to the "ssadadb2.inf" file included in the Vibrant USB drivers available directly from Samsung's Vibrant page.
Selected "Samsung Kies" on the USB settings on the phone, turned on USB Debugging, opened Kies on the computer, plugged in the phone, and it did it's thing.
Only took 3 days to figure it out!
Yeah its been a hit or miss. I have win7 x64 on two laptops and my desktop. It works in the desktop and only one of the laptop and I installed the same drivers for all 3
Sent from my SGH-T959 using XDA App
toeshot said:
I downloaded Mini Kies 2.0 onto my windows 7 64bit machine and installed the Samsung drivers I have everything worked smoothly. I upgraded 3 phones to Froyo with no issues. here are the drivers I have
yeah it works for me too, i just installed these drivers and put usb debugging mode. upgrading just now. thanx
Click to expand...
Click to collapse
W/ WIN 7 64 Bit I upgraded my phone to Froyo.
I'm running win 7 SP1 64 bit.
Samsung told me that Kies mini and the driver is not compatible to 64 bit.
After some research this is what I have done and able to upgrad my phone to Froyo.
1. check the USB debugging.
- Samsung says to uncheck it. but if you do, you probably have MTP USB device error. So make sure your USB debugging is on.
2. After the you connect your phone, Samsung Kies Mini keeps crashing??
-Uninstall IE 9.
Solution is...
*Check the USB Debugging and Uninstall IE 9.
**Make your the battery is fully charged.
Connect phone
Start Kies Mini
I got so sick of Windows I switched to Ubuntu Linux. It's free and just as easy to use as windows. No crashes, no viruses, and it sets up as a dual boot so I can use windows when necessary.
Hi,
I was using the stock ROM on my Galaxy SII, Windows XP detecting the phone just fine and I can do internet teethering and etc... I subsequently flash my rom to NDT MIUI v4.1, my windows XP did not like the phone anymore and started to ask me to provide drivers. Last week, I flashed the rom again to NDT MIUI v8.1, the problem persist. Below is what I had attempted to resolve the problem but unsuccessful. I hope someone can shed some light...
Attempts made to resolve the problem:
1. unplug the phone, uninstall Kies and Samsung drivers on Windows XP. Reboot, then reinstall Kies and Samsung drivers. Reboot again, then plug in my phone, Windows XP detected the device as "Galaxy S2" then prompt a window to search driver. Regardless where i go from there, no driver found.
2. Turned the phone into storage mode after connecting to windows xp. Can read the sd cards, but unable to do anything futher, like teethering.
3. Downloaded latest Kies from Samsung website and repeated step 1. No success as well....
I hope someone can help me...
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
I would backup my files and factory reset the tab. Should help.
i have done factory reset twice
Make sure debugging is unchecked.. What version of windows are you running?
I find that my tablet will not recognize on XP or Window 7 since I have owned it. (Google I/O bought in July of last year) Once I installed CM9 it would then be recognized through Macbook Pro Android transfer.. (something like that. I sold the Macbook awhile back) I resort to Dropbox.. Its a *****.. But I don't complain and I stream most of my files anyway...
ammad53 said:
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
Click to expand...
Click to collapse
I often connect my tablet to my Win7 PC so I can copy TV shows from Media Center to the tablet. Sometimes the PC doesn't recognise the tablet unless I power down the tablet and turn it back on again. No idea why though.
follow this
download samsung 7510 usb drive, then download kies and last download windows media 11. if your xp its not original, follow some tutorial on youtube about how to install windows media player 11.
i has this issue with windows xp few days ago..
z31k said:
Make sure debugging is unchecked.. What version of windows are you running?
I find that my tablet will not recognize on XP or Window 7 since I have owned it. (Google I/O bought in July of last year) Once I installed CM9 it would then be recognized through Macbook Pro Android transfer.. (something like that. I sold the Macbook awhile back) I resort to Dropbox.. Its a *****.. But I don't complain and I stream most of my files anyway...
Click to expand...
Click to collapse
if you can't connect to a pc, then how were you able to install cm9?
mawells787 said:
if you can't connect to a pc, then how were you able to install cm9?
Click to expand...
Click to collapse
Actually you can. I don't know how he did it but if you want to know here's what I did.
Go here: http://forum.xda-developers.com/showthread.php?p=15693193.
You can root through an update.zip, flashed from the stock recovery (at least for the 3g version). After that install rom manager and flash cwm. Finally download cm9 or aokp or everything else you want and flash away!
Btw, I have no problem connecting to PC. I just did it that way.
Sent from my amazing 10.1 galaxy tab
PC recognizes the tablet but...
The pc recognizes my tablet, but even after it says safe to use, the tablet never shows up under my computer to transfer files. Any suggestions?
Dominus357 said:
The pc recognizes my tablet, but even after it says safe to use, the tablet never shows up under my computer to transfer files. Any suggestions?
Click to expand...
Click to collapse
Do you have MTP enabled under storage > USB computer connection?
Same Problem
ammad53 said:
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
Click to expand...
Click to collapse
I bought a new Samsung Galaxy Tab GT-P7500 yesterday, unboxed it and when i connected it to my laptop for the first time, it showed this problem.. When i connect it to my laptop, it says MTP Initialization, with a message on my laptop "USB Device not recognised" & a 'X' on the battery of my tablet.
I have tried to reinstall the usb drivers & kies several times, but still i am having this problem.. i have bought a new one and not able to use it for 2 days now.. feeling very sad.... Please Help....!!
deepakgupta said:
I bought a new Samsung Galaxy Tab GT-P7500 yesterday, unboxed it and when i connected it to my laptop for the first time, it showed this problem.. When i connect it to my laptop, it says MTP Initialization, with a message on my laptop "USB Device not recognised" & a 'X' on the battery of my tablet.
I have tried to reinstall the usb drivers & kies several times, but still i am having this problem.. i have bought a new one and not able to use it for 2 days now.. feeling very sad.... Please Help....!!
Click to expand...
Click to collapse
XDA is no longer worth my time.
TimOster said:
Read the Kies information on Sammy's site. Make sure you have the settings as they tell you. You can make the tab act like this if USB Debugging is turned on for instance.
Click to expand...
Click to collapse
Thanks for your advice, but i have done everything right as descibed in manuals, but still i am unable to connect my tab to my laptop, as usb connection is the only way to connect, i am feeling very disturbed.... Please help......!!
Sent from my GT-P7500 using xda app-developers app
Problem with computer not seeing phone
deepakgupta said:
Thanks for your advice, but i have done everything right as descibed in manuals, but still i am unable to connect my tab to my laptop, as usb connection is the only way to connect, i am feeling very disturbed.... Please help......!!
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
I had problem with my phone not being seen by my computer, I tried almost everything I read on these forums,
and nothing work, uninstalled drivers, changed settings on my phone, still nothing, then at last I change the setting
by dialing *#7284# (phone utility) made sure UART was set to PDA, USB set to PDA then Qualcomm USB Settings set to MTP,
now my computer sees my phone, I hope this will help others, it worked on mine, I have a Sprint Galaxy Note 2 flashed to Page plus,
with the help of Viper32, I get 3g service, pic messaging etc....
As stated in the title, my Windows 7 64-bit does not detect my SGS3 while in download mode. It does when I boot the phone and connect the USB cable. It also detects my wife's Galaxy S2 which I rooted some months ago. My SGS3 is not fully charged, only 15%. I have downloaded and installed the last USB drivers (1.5.40), but not Kies. Maybe I should wait until it is completely charged or it isn't necessary at all?
Any help would be appreciated.
Thanks.
joanquro said:
As stated in the title, my Windows 7 64-bit does not detect my SGS3 while in download mode. It does when I boot the phone and connect the USB cable. It also detects my wife's Galaxy S2 which I rooted some months ago. My SGS3 is not fully charged, only 15%. I have downloaded and installed the last USB drivers (1.5.40), but not Kies. Maybe I should wait until it is completely charged or it isn't necessary at all?
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
Well, I have done the following: I have connected the phone to another computer (a laptop), which has windows 7 32 bit but with an older version of the Samsung USB Drivers (1.4.103) and Odin detects the phone correctly. So It looks like using the 1.5.4.0 version of the drivers does not work. I'm going to uninstall the last version and reinstall the 1.4.103 version and see if it works. I'll post results here.
Solved!
It was a flawed usb cable!
It's not the stock usb cable that comes with the phone, it's a cable I had used for years with my older phone without problems.
When I tested the phone in the laptop, I used a different cable (the Samsung cable). That's the reason why it worked ok with the laptop.
Hi there,
I have the same problem. I am using the stock cable that came with the device. When I plug it into my laptop the phone detects that it is connected, however there is no response from my laptop. There is no device picked up in My Computer.
I'm sure this is just some n00b mistake I've made in some setting somewhere but I'll be damned if I can figure out what it is.
Any help would be greatly appreciated. (USB debugging is ticked).
Have you installed samsung kies to get the drivers for the sgs3?
I've just installed Samsung Kies this minute. The application is open however it seems to be stuck on the 'Connecting...' title screen...
Waiting.....
I've noticed that when I first plug it in, Windows searches for the drivers but is having trouble installing the SAMSUNG Mobile MTP Device.
[UPDATE]
... Just running device troubleshooter. Hopefully that will sort it out.
:s
[UPDATE, UPDATE]
Sorted it... Completely rebooted my laptop and then completely rebooted my phone. This time it installed the MTP Device successfully with no errors. Thanks for the help.
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Might be stating the obvious but is your phone set at usb debugging? I have the same issue from time to time but when I unplug and plug back it fixes itself.
Hope you get your stuff fixed soon.
Sent from my GT-I9300 using xda app-developers app
Thanks for your response.
Yes, USB Debugging is enabled.
Jiraiya-08 said:
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Click to expand...
Click to collapse
That's odd.. I use Ultima ROM and have updated to 8.1.1. I just checked just to make sure (my last update was done OTA) and yeah, computer recognized phone right away.. heard a little computer sound and everything. I am also running Windows 8
The base changed in v8. If you haven't done a fac reset since then you should try that.
Ok I just tried to make a factory reset, nothing changes...
Oh, and if that can help: when the phone's booting, Windows says "Unrecognized device". When it's booted up, it disapears.
Anyone ?
Drivers...
I used these drivers.
It worked for me...
http://forum.xda-developers.com/showthread.php?t=1564104
Work for me too! THX
Thanks for your help !
Unfortunately it didn't work for me.... :/
Any other ideas ?
Sorry to keep rising this thread but this issue is really annoying... :/
Up
I still have the same problem. No other ideas please ?
? :/
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Glebun said:
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Click to expand...
Click to collapse
Thank you for your response !
- Easy UMS doesn't seem to work, even if the app doesn't show any error on the phone
- How do I connect via ADB ? I tried to connect the phone while it is in Download Mode, nothing appears on Windows or Odin
- As I said, in Download Mode, Odin doesn't seems to recognize anything...
And of course, I already tried to change the cable, the USB port, or even the computer i'm connecting the phone to...
Thanks again for your help
Starting to sound like a damaged micro USB port on the phone possibly, or a driver's problem
Oh, and there's a thing: when I reboot the phone, while the Samsung logo appears on the screen with the short jingle, the PC makes 3 or 4 times a sound like something has been plugged, and showes a "Unrecognized device" warning window. When the boot is finished, and the rom is loaded, everything just disappears and no sound is any longer made by the PC.
Also, please note that when I connect the phone to the PC (using the same PC, cable and USB port of course), the phone charges up just like before, without any problem.
have you tried the old drivers?
search Google for " Samsung USB drivers 1.4.6.0 "
disconnect your computer from the internet
Install the drivers.
don't reconnect to the internet.
connect your phone and let windows find the drivers