Related
Hi! I have problem with perseus Kernel If I overclock cpu a little bit, All the same the problem (If I start play game some time it will restart), it does not matter how much overclocked. I tested 1.7Ghz clock and test it For 1375mv, 1400mv, 1425mv, and it's not effective and between a perseus rom freezes lock screen and I have to restart it :S, siyah kernel will not let me even overclock more than 1.5GHz can someone help me with this problem :laugh:, I love overclocking :silly:
SiyahKernel S3 v1.5 CPU over/underclock: 100-1800MHz 18-steps , GPU over/underclock: 54-800MHz ,Perfect to play , i have been using for a long time and i had never any problems ........
devid801 said:
SiyahKernel S3 v1.5 CPU over/underclock: 100-1800MHz 18-steps , GPU over/underclock: 54-800MHz ,Perfect to play , i have been using for a long time and i had never any problems ........
Click to expand...
Click to collapse
Okay But, why I'm not able to overclock 1.8GhZ its show me 200-1.5GhZ I tried overclock stweaks, cpu master, set cpu, and Foxhound extras but not help I try flash siyah again If that help.. Block story max settings eat really MUCH performance
I'm not even able hit over the 1.5GhZ and it show me 25-1.5GhZ (((
Anyone?
Anyone know what I do wrong if I'm not able hit 1.8GhZ?
yes,, your cpu isn't up to it, simple. With overclocking make small steps, note what you are doing, experiment with voltages, but all chips are different so experimentation is the only way, along with lots of reading and learning, skill aided by searching
slaphead20 said:
yes,, your cpu isn't up to it, simple. With overclocking make small steps, note what you are doing, experiment with voltages, but all chips are different so experimentation is the only way, along with lots of reading and learning, skill aided by searching
Click to expand...
Click to collapse
okay But why this perseus give me overclock more than 1.5GhZ But Perseus is so buggy :S and I can normally overclock Gpu with siyah kernel but If I run test I am not note difference, 1 better fps for 700MhZ GPU Clock My Phone is so strange
saletan said:
okay But why this perseus give me overclock more than 1.5GhZ But Perseus is so buggy :S and I can normally overclock Gpu with siyah kernel but If I run test I am not note difference, 1 better fps for 700MhZ GPU Clock My Phone is so strange
Click to expand...
Click to collapse
you have to understand the fact that the kernel is in alpha stage, so if you dont know what you are doing you shouldnt have flashed it. and also all chips are not capable of handling higher frequency, 1.6 ghz should be asafe bet for all processors..
700mhz in siyah makes a big impact depending on the benchmark you run.. check the thrread in my sig for more info.
Thanks all for posts! I figured it out, I give more juice for all these steps for perseus alpha And not anymore reboots. 1.8 GhZ 1450mv 1.7GhZ 1400mv, 1.6GhZ 1350mV, 1.5GhZ 1300mV, I run now 1.7GhZ for dual core mode, I'll try soon run my phone quad core mode . But I can't overclock my gpu with perseus and siyah rom doesn't give me overclock more than 1.5ghZ DD so strange Ps: 1.7 GhZ Dual core My Cpu score is 8123 and memory 5538 on quandrant benchmark.
Edit: If my phone a little bit overheat it reboot same thing is 1.6GhZ, 1.7GhZ, 1.8GhZ. 1.6GhZ I run stability test about 1-2min and it reboot, Battery About 41 degrees Celsius :S
Why in the name of all that is holy would you overclock your CPU, and then run it in dual core mode??
You would be better off leaving it at 1.4ghz in quad core mode.
That seems pointless.
Sent from my GT-I9300 using xda premium
I make video today
Sent from my GT-I9300 using xda app-developers app
http://www.youtube.com/watch?v=glPp2ORTvFo&feature=youtu.be Sorry for poor video my video editing software doesn't working But If I run test about 1 min device reboot My video will not be saved if it shuts down so I had to stop Stability Test before a turn off.
I will do later in the evening siyah kernel video for overclocking problem
Hello forum,
I have followed through the steps to root my Galaxy 5 player and I'm interested in over clocking it for better performence towards games and all around use. Can someone guide me on which application, what speed to set it on, or a break down about the good and bads of overclocking? This would be my first time doing so and I would appreicate the guidence.
Thank you for your time.
You will need to flash a custom kernel. Look in the development section. It will give you easy answers.
Sent from my YP-G1 using Tapatalk 2
There are applications that can do this, what would the kernel have to do with me over clocking?
potatoman83 said:
You will need to flash a custom kernel. Look in the development section. It will give you easy answers.
Sent from my YP-G1 using Tapatalk 2
Click to expand...
Click to collapse
Jexifta said:
I have followed through the steps to root my Galaxy 5 player and I'm interested in over clocking it for better performence towards games and all around use. Can someone guide me on which application, what speed to set it on, or a break down about the good and bads of overclocking? This would be my first time doing so and I would appreicate the guidence.
There are applications that can do this, what would the kernel have to do with me over clocking?
Click to expand...
Click to collapse
There are many applications in google play to help you overclock(OC)/underclock(UC). The most popular ones seem to be Tegrak Ultimate and SetCPU. Both pretty much do the same thing (with a few exceptions one being SetCPU tends to give you a bit more information to look at), however these two you have to pay for. Some free alternatives (albeit you will only get the basic functionality) are AnTuTu CPU Master (Free) and No-Frills CPU Control. These two give (along with the ones mentioned before) you the basic functions to OC/UC, Undervolt, Set the Governor, Set the I/O scheduler, and some other tweaks you can do.
The good thing about overclocking is that it has the potential fix lag problems on your device, make games run smoother, and etc
The bad thing about overclocking is that it makes your CPU work harder (meaning that it could damage it if you OC for very long periods of time), makes your device run hotter, and reduces battery life.
The kernel is the thing that gives you the ability to OC/UC. Most kernels are setup default to OC to 1.2 ghz. But you can go much higher than that. I know with Tegrak Ultimate you can OC to 1.3 ghz, however some people have OC'ed the 5.0 to 1.5 ghz. You must install (Flash) a kernel in order to overclock or underclock the CPU.
This is a list of all the custom kernels/roms for all the Galaxy Players currently out. I believe most have instructions to help you flash a new kernel/rom. Just make sure you are flashing one that is meant for YOUR DEVICE, or you will brick it. http://forum.xda-developers.com/showthread.php?t=1720457
This is from XDA http://www.youtube.com/watch?feature=player_embedded&v=HMdOlxOee0o that talks about Rooting and Overclocking
This is another video showing you how to overclock http://forum.xda-developers.com/showthread.php?t=1720457 (pretty much the same thing for all android devices.
Hope this helps you out.
Tegrak Overclock works fine. Overclocked to 1.3GHz with no problem at all. Needs root and custom kernel.
If you have money buy tegrac overclock ultimate..i use on 1.5 ghz just with tiny more voltage and other fq i undervolted so very good speed and battery is also good.
Sent from my Nexus 7 using xda app-developers app
I use Tegrak Overclock ultimate to reach up to 1.5 GHz. But do you really need a custom kernel to overclock?
I think so, I gave No-Frills CPU control and only got the default my player runs on. I just don't like the custom kernal for the USA Galaxy Player 5 because it doesn't last as long (charging and discharging) as the stock kernal does.
Hollow_Ninja said:
I use Tegrak Overclock ultimate to reach up to 1.5 GHz. But do you really need a custom kernel to overclock?
Click to expand...
Click to collapse
Jexifta said:
I think so, I gave No-Frills CPU control and only got the default my player runs on. I just don't like the custom kernal for the USA Galaxy Player 5 because it doesn't last as long (charging and discharging) as the stock kernal does.
Click to expand...
Click to collapse
Well that's strange because I remember before I flashed a new kernel I was still able to overclock past stock
Jexifta said:
I think so, I gave No-Frills CPU control and only got the default my player runs on. I just don't like the custom kernal for the USA Galaxy Player 5 because it doesn't last as long (charging and discharging) as the stock kernal does.
Click to expand...
Click to collapse
No frills cpu control is NOT overclocking tool..onlu overclocking tool on galaxy player is tegrack overclock.And depends what you want ..slow device but few hours more to last or much faster device but recharging almost every night..difference in speed on GP betwen 1 ghz and 1.5ghz is just huge.
Sent from my Nexus 7 using xda app-developers app
DZonikg said:
If you have money buy tegrac overclock ultimate..i use on 1.5 ghz just with tiny more voltage and other fq i undervolted so very good speed and battery is also good.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Can you share your voltages please?
Thank you.
i been using that on my GP 5.0 international and it works pretty smoothly
Sent from my YP-G70 using xda app-developers app
zardak said:
Can you share your voltages please?
Thank you.
Click to expand...
Click to collapse
1496mhz 1310mv 1125mv
1000mhz 1245mv 1100mv
800mhz 1190mv 1100mv
400mhz 1040mv 1090mv
200mhz 930mv 1070mv
100mhz 870mv 930mv
It can probably go even lower but i did not go lower yet..i use this fq for few months with no single reboot.
Edit: I lower even more core voltage for 400mhz to 1040mv and for 200mhz to 1000mv and works normaly so far.
Sent from my Nexus 7 using xda app-developers app
DZonikg said:
1496mhz 1310mv 1125mv
1000mhz 1245mv 1100mv
800mhz 1190mv 1100mv
400mhz 1040mv 1090mv
200mhz 930mv 1070mv
100mhz 870mv 930mv
It can probably go even lower but i did not go lower yet..i use this fq for few months with no single reboot.
Edit: I lower even more core voltage for 400mhz to 1040mv and for 200mhz to 1000mv and works normaly so far.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
those voltages are pretty high.
these are mine
1500mhz 1310mv 1125mv
1200mhz 1210mv 1100mv
800mhz 1050mv 1100mv
400mhz 950mv 950mv
200mhz 800mv 950mv
100mhz 750mv 950mv
Sent from my YP-G70 using xda app-developers app
gskillivenom said:
those voltages are pretty high.
these are mine
1500mhz 1310mv 1125mv
1200mhz 1210mv 1100mv
800mhz 1050mv 1100mv
400mhz 950mv 950mv
200mhz 800mv 950mv
100mhz 750mv 950mv
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
Ok thanks..i started to lower small by small to be shure buy even with that voltages i got good battery life.I change now to your voltages with just +10mv on 100,200 and 400.
I got this results
Sent from my Nexus 7 using xda app-developers app
Here my voltages, +50~75 mV from the freeze value for each freq. (i don't have tegrak ultimate, so I use Voltage Control by xan):
1200Mhz 1250mV
1000Mhz 1150mV
800Mhz 1075mV
400Mhz 925 mV
200Mhz 850 mV (limited by app)
100Mhz 850 mV (limited by app)
This on rj14 kernel, on rj12 i can go even much lower without any freeze/reboot don't know why...
Another very strange thing is that I've tested a lot some lower voltages with some benchmark/stress/games tests, all passed, but as soon as I made a search on Play Store the device freezes with artefacts on screen.
zardak said:
Here my voltages, +50~75 mV from the freeze value for each freq. (i don't have tegrak ultimate, so I use Voltage Control by xan):
1200Mhz 1250mV
1000Mhz 1150mV
800Mhz 1075mV
400Mhz 925 mV
200Mhz 850 mV (limited by app)
100Mhz 850 mV (limited by app)
This on rj14 kernel, on rj12 i can go even much lower without any freeze/reboot don't know why...
Another very strange thing is that I've tested a lot some lower voltages with some benchmark/stress/games tests, all passed, but as soon as I made a search on Play Store the device freezes with artefacts on screen.
Click to expand...
Click to collapse
You can use NSTools for undervolting. its 100% free and very useful.
gskillivenom said:
You can use NSTools for undervolting. its 100% free and very useful.
Click to expand...
Click to collapse
I've already tried many of these application, even NSTools, but Voltage Control is perfect for me.
The reason is that in all these other application I tried, the voltage value you insert is not controlled, you can even go to 5V for example (yes I mean 5000mV), and this does not make me safe!
Tegrak Ultimate should be perfect too, I think, with its bar for voltage control and not an edit box.
I am runing for some time this profile
1572mhz 1330mv 1135mv
1100mhz 1210 1100
800mhz 1050 1100
400mhz 930mv 960mv
200mhz 810mv 950mv
100mhz 750mv 930mv
Ita super smooth ..did not have any resets or heating and battery lasts like on stock fq.
Sent from my Nexus 7 using xda app-developers app
DZonikg said:
I am runing for some time this profile
1572mhz 1330mv 1135mv
1100mhz 1210 1100
800mhz 1050 1100
400mhz 930mv 960mv
200mhz 810mv 950mv
100mhz 750mv 920mv
Ita super smooth ..did not have any resets or heating and battery lasts like on stock fq.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Which ROM and Kernel are you using? Just curious.
Device:- LWW
Rom :- Stock 4.1.b.0.587
Rooted:- Yes
Boot-loader:- Unlocked
Kernel:- Mesa 2.7
Kernel settings
Overclocked:-yes 1.6GHZ
Governer:-Lagfree
scheduler:- sio
Here is mine settings and what do you prefer for lag Free gaming experience.
Sorry for bad english, Its not my native language.
Sony's ICS is badly optimized. If you want lagless gaming, stick with GB.
I wouldn't use 1.6ghz tho, 1.4ghz is the highest possible safe frequency considering that arc s with msm8255t cpu is clocked at 1.4ghz by default.
1,4ghz is enough for me for many games ive installed, especially for PS1 games
games setting must be interactive gov 249mhz - 1,4ghz with i/o sio.
yes, i sent from my phone using Xda Premium, so what?
Click to expand...
Click to collapse
I always play 2d games
Max 1.2 GHz
Governor smartass2
Max background apps: 3 app
If you Want ics and gaming you can use cm9.
Sent from my ST15i using Tapatalk 2
Keep a clean system with enogh free RAM.
GB is ideal for gaming.
If on ICS, get the latest adreno drivers for it.
As anonymous said, OC-ing to 1.4GHz max i safe, dont go overkill and fry your device!
Set minimum CPU freq. to 250MHz and a good governor. Maybe changing gov to performance, just while gaming....
Also, find a tweak package that works best for you.
Sent from my ST15i
ROM: Stock 2.3.4
Kernel: RAGE Kernel v.3.0
OC: 1,4 Ghz (1,6 means more fps but 1,4 is safer and still good)
Governor: SmartassV2
Tweaks: No ram or other tweaks, just pure stock performance
Result: GTA VC at ~ 30 fps
Stock ics .587 (heavily modded with many nxt features)
lupus kernel
1.2GHz
smartassV2
I/O scheduler cfq
full project fluid
gaming is smooth, preety much lagless
apps open very fast
Thanks all of you for replying.
an0nym0us_ said:
I wouldn't use 1.6ghz tho, 1.4ghz is the highest possible safe frequency considering that arc s with msm8255t cpu is clocked at 1.4ghz by default.
Click to expand...
Click to collapse
Thanks for the advice.
changed to 1.4 GHZ and smartassv2.
There is a new script for better gaming experience!! Check that out too !!
Anoopnk said:
There is a new script for better gaming experience!! Check that out too !!
Click to expand...
Click to collapse
Can you link me to that script.
lhcrulz said:
Can you link me to that script.
Click to expand...
Click to collapse
Here
http://forum.xda-developers.com/showpost.php?p=36246428
Don't forget to hit him thanks!
LuPuS kernel -
OC: 1.1 ghz
Governor: smothass
I/O: noop
Script: Project Fluid
zRam enabled
Some graphics libraries that I draw from the last update of the Xperia S
Device: Live with Walkman
ROM: Stock GB 0.62 (with build.prop and init.d tweaks)
Kernel: X Kernel
These are my settings:
Max. Freq.: 1.4 GHz
Min. Freq.: 249 MHz
Governor: smoothass
Scheduler: sio
If you're more of a gamer, GB is ideal. My settings allow smooth gaming on heavy games (e.g. The Dark Knight Rises) - absolutely no lag. I can even multitask while gaming. You might also want to add some system tweaks and scripts for better RAM management and better battery efficiency.
Spex said:
Stock ics .587 (heavily modded with many nxt features)
lupus kernel
1.2GHz
smartassV2
I/O scheduler cfq
full project fluid
gaming is smooth, preety much lagless
apps open very fast
Click to expand...
Click to collapse
I asked for something about ur project fluid as I was thinking to do exactly what are u using now.. I am working with kernel panic and I am thinking about changing it to lupus kernel and use ur project fluid but I wanna try them 1st on panic as it is stable and working very well with me till now
-Device:Mini pro (mango)
-Rom: Revolution ICS HD
-Kernel: Kappa kernel 1.6, i didn't try another with this rom
-Settings: 250Mhz ~ 1300Mhz Interactive, Sio.
-Force GPU rendering: disabled
Enviado desde mi SK17i usando Tapatalk 2
Rom :- FXP CM7.3
Rooted:- Yes
Boot-loader:- Unlocked
Kernel:- Rage 2.9 for fxp-cm7
Kernel settings
Overclocked:-yes 1.2GHZ(performs in 3d better than 1.4ghz)
Governer:-smartassv2
Tweaks
Adreno booster v0.6
No cpu rendering
8170 score Antutu
Real Racing 3 smooth as butter
I love my phone
stock gb .84
bloatware removed.
burgas said:
Device:ST17i - Active
Rom :- Stock GB .84
Rooted:- Yes
Boot-loader:- Unlocked
Kernel:- X-Kernel v4
Kernel settings
Overclocked:-no 1.0 GHZ
Governer: smartass v2
Scheduler:- sio
Tweaks:
Adreno booster v0.6
Supercharger
The GB ROM´s are better for gaming
greetings
Click to expand...
Click to collapse
Adreno booster? Wow never seen that before link to thread?
Sent from my WT19i using xda premium
guys i m using 1ghz lww...smartassv2,sio,xnxt v9.1,kappa kernel ...i can play any game...
Hi everybody.
It would be nice if someone could make Kernel/Rom with possible GPU overclock.
By my knowledge in Xperia P is Mali-400MP with 1 (i find somewhere 2) core fragment with default speed 200Mhz.
In older SGS2 there is Mali-400MP4 on stock 267Mhz.
Is there a way for safe overclock Mali GPU in Xperia P to 267Mhz or maybe 240Mhz?
Best regards
no, not yet, and maybe never.
it will only gives problems (battery drains much faster, phones become very hot etc.)
NovaThor chips are designed for low power consumption, also overclocking the Cpu the heat produced still low.
I think that the biggest problem is the driver of chip and its documentation
mali 400 stock Frequency min 240 max 395. why give problems (except for battery )
http://www.arm.com/products/multimedia/mali-graphics-hardware/mali-400-mp.php
nickholtus said:
no, not yet, and maybe never.
it will only gives problems (battery drains much faster, phones become very hot etc.)
Click to expand...
Click to collapse
it will give problems for sure but on some heavy games our phones needs gpu overclock
Overclock only turn your phone to heater and energy eater, no to lamborgini
PS:sry for my bad english
If not overclock, atleast governor control? And I/O too if thats possible?
Is this possible atleast?
taylan08 said:
mali 400 stock Frequency min 240 max 395. why give problems (except for battery )
http://www.arm.com/products/multimedia/mali-graphics-hardware/mali-400-mp.php
Click to expand...
Click to collapse
max overclock on my s2's gpu is 520mhz (wid custom kernel) bt it requires 1350mV .. sufficient enough to make a fried omlet...
being an ex xu user.. i have found no game (atleast among what i play) which ran properly on s2 bt not on xu.. extra cores gives better benchmarks real life perfomance is games is almost similar...
Hello community,
I have installed on my Droid DNA CM10.2, without problems.
UNLOCK
S-OFF
Root
But unfortunately, I have seen that works only one of the four cores!
After a long search I found a CPU Editor for DualCores and Beta QuadCore. But unfortunately this does not at all - the version for DualCore works fine.
Has anyone similar experiences or can someone give me a tipp?
It is this mod: "CPU Editor QC Beta 1" from Smokin1337
It shouldn't need all four cores on unless you're running something that's cpu intensive. Normally it's set to use one core and as workload ramps up the other cores come online.
I run AnTuTu Benchmark and switch to CPU-Z = one core at 1512 MHz overall 25% Load!
CPU Benchmark the same result, one core and the rest ist "stopped".
Any idea?
knie said:
I run AnTuTu Benchmark and switch to CPU-Z = one core at 1512 MHz overall 25% Load!
CPU Benchmark the same result, one core and the rest ist "stopped".
Any idea?
Click to expand...
Click to collapse
What's were your scores?
It seems to be a stock kernel problem, try running crpalmers kernel.
AnTuTu score (without CPU Editor) 11247 and with DualCore Fix 13978
Edit: Problem solved! Kernel update crpalmer 3.5.1 = AnTuTu score ~20.000
Thx @orangechoochoo!