I replaced broken digitizer in my neo v, but the touch screen is not working in new one.
Touch screen was working in old digitizer.
I tested proximity sensor in new digitizer and it is working.
Did they send me broken digitizer or could it be software issue?
I bet it is broken
i think the same, broken.
Yep he's broke man^^
seNt froM My bustEr Neo V <3
Weird. All strip cables are ok?
If they are, then then the digitizer is broken. Did you order the correct model?
Related
My Touch HD, for 9 months now, perfectly works with the screen cracked.
Touch is ok, no problem.
No pixel missing (only the distortion from the cracks thats barely visible from straight look).
I'd like to change it my self but i dont know what to change....!!
touch screen: viewitem.eim.ebay.gr/HTC_Touch_HD__T8282_LCD_Screen_Display__Tools_New/220603358520/item
or
LCD: viewitem.eim.ebay.gr/Tctil_Pantalla_wGlass_Lens_Para_HTC_Touch_HD__T8282/150367803789/item
But it works now, if the risk changing it myself is high, from killing it, is it better to leave it as it is?
P.S. I had changed my screen 1 year ago and I payed 268€ (it cracked in 3 months after htc service)
Thnx in advance
it's probably the lcd since the touchscreen (digitizer) is made out of plastic. I don't think that'll crack very easily
OK i have a similar question...
But first of all can someone please clarify if the OP has the items the other way around? I mean is touchscreen (digitizer) the outer casing with the plastic screen and LCD the inside part?
OK now to my question. I dropped my phone and scratched the outer casing. Everything works fine but i would like to change the touchscreen just for aesthetics. Reading many many many tutorials i noticed most people faced problems trying to replace lcd screen only or touchscreen only and prefer to buy the bundle. My question is if i buy the touchscreen that the OP states here : viewitem.eim.ebay.gr/Tctil_Pantalla_wGlass_Lens_Para_HTC_Touch_HD__T828 2/150367803789/item isn't just a matter of connecting the digitizer to my existing LCD? Are they connected with a conducting adhesive tape as i was reading on the tutorials? Or this is not the part connected with the adhesive?
Thanks a lot for the help and sorry for hijacking the thread.
I've changed only the digitizer in my Blackstone but its really difficult job and took me about half day to finish. The digitizer its glued to LCD and you need to be very careful to separate them. I've done it only because i bought this HD very cheap for parts but next time will probably buy the whole part (LCD+Digitizer).
don't change digitizer
my touch-panel was not working correctly,i bought a digitizer to change it self but the lcd is broken ... impossible don't try.
i recommend you to buy complete set lcd+digitizer , its need only one click on motherboard
be carefully
metbod said:
my touch-panel was not working correctly,i bought a digitizer to change it self but the lcd is broken ... impossible don't try.
Click to expand...
Click to collapse
It's possible, I did it yesterday
So it happened - my neoV fell on the ground. The screen smashed totally, however
the picture still seems to be clear behind broken glass, no bleeding or discoloration.
It's still responsive to gestures, however there is danger of cutting myself while touching the surface.
Now I need to know what needs replacing. Is it only the touchscreen - I've found some on ebay:
http://www.ebay.co.uk/itm/SONY-ERIC...arts_Tools&hash=item4604353c33#ht_2532wt_1165
however I'm not sure if this is only a thin foil that goes over the glass or this is the whole glass that I need to replace with.
The cover is slighty scratched at one corner, this is not of such importance to me, I just need a working screen.
if screen is entirely responsive, then touchscreen/digitizer is ok, no need to replace it.
you might be just lucky and end up with ONLY broken front mask.
Digitizer is behind the glass? I thought this is a one-piece component. How is this mask called?
EDIT: you were probably referring to front cover? I found those also on ebay. I'm not sure how NEO V screen is held together - digitizer can be separated from front case?
Front cover, front mask, front housing..different names, but yes we think on same.
Digitizer shoud be stuck with screen and front case can be removed without separating from digitizer or screen.
Google up for disassembly videos tutorials or pdf guides, you can even find it in accessories section.
Repair
It's danger for screen sensor if you direct touch,,,
suggest go to Sony center nearly
sorry my bad english
It's the digitizer. It's composed from glass + sensors and this part as whole can be detached from front case.
But I need a new front case too, I found one of the side panels to have broken support latches around screws. It's time to get a red one
Does anyone know if MT15i Mt15a parts are compatible with MT11i Mt11a?
Xpeia neo v front screen glass cracked
Hey buddy,
I have broken the screen glass of my xperia neo v and fortunately it is working fine still.........
All the gestures are working perfectly and there are no changes in color...........just like u've mentioned.........
Just wanted to know if you've got your screen replaced, if yes from where? how much did it cost you?
Could you please give me some tips for the same.
Thanks & Regards.
I did
You need a new digitizer and case if some important parts of it are broken. Mounting the digitizer is a bit difficult, since it's hard to close it without trapping dust between it and LCD. Look into the technical manual
Check eBay for prices.
Sent from my MT11i using xda app-developers app
Hi
Is there any way to retrieve my contacts as the phone screen is totally not working
Guys,
Today I dropped my DX (so much to say about Friday the 13th...)
You can see it in the attached picture. I just wanted to ask, will the following replacement work:
http://www.ebay.de/itm/HTC-Desire-X...AU_MobilePhoneAccessories&hash=item20d2dca972
Thank you in advance!
Few weeks ago, I dropped my DX too, although damage was less. I read about digitizer replacement on HTC devices (in general) and I read it's not that easy as on Samsung devices. One guy tried to replace digitizer and he ended up with broken LCD panel. You can also buy whole module (LCD screen + digitizer) but it's like a roll of a dice - you can get good lcd and you can get bad lcd too. It's a risk. You can send it to local repair centre. I was told it would cost about 100-120€. From then, I knew, I have to live with that broken screen. lol
Found something different:
http://www.parts4repair.com/complete-screen-assembly-with-lgp-for-htc-desire-x-t328e/
Does anybody have experience with that shop? The price is ok, I would even order a new back cover there (because mine is a bit broken, too).
Hard to replace
I've tried to replace the touch screen (only the glass). In eBay it's about 25$ or something like that.
It hard, very hard to replace. I've ended with a broken LCD, because when try to separate the glass from LCD, LCD broke.
For me, it's better to replace the whole screen, not only the glass. I've seen it for 51$ in eBay, but worth it.
Video on how to replace (as you can see, you need a dryer, and big ball, because phone gets VERY hot, and you're the whole time thinking you're going to melt it
.you*tube*.co*m/*watch?v=hzRsLDahWVg
I won't try to replace only the glass, because my lcd is already broken. So I'll replace whole display unit (see link above for shopping details). Video on how to replace just the whole screen assembly can be found here: https://www.youtube.com/watch?v=hzRsLDahWVg
Good news guys... My package arrived in Germany, so soon I will be able to replace my screen and get my DX working again...
I have a Problem
I didnt drop my xtouch but its touchscreen isnt working at the corners HELLLPPPP
WHAT TO DO?
Anybody knows a reliable source for a new lcd + digitizer module for desire X?
kisbatyu75 said:
Anybody knows a reliable source for a new lcd + digitizer module for desire X?
Click to expand...
Click to collapse
Look a few posts above, my post #3 contains a link (that's the shop I used, lcd + digitizer are stil working well).
Firday the 13th... aaaand I dropped my Desire X smack on the corner, leaving me with a nice mosaic of cracks all over.
Thanks for the provided links. Guess I have some tinkering ahead of me....
help
after i replaced removed the digitizer and put it back it not sticking ...
i cleaned it using glass cleaner also ...!!
[email protected] said:
after i replaced removed the digitizer and put it back it not sticking ...
i cleaned it using glass cleaner also ...!!
Click to expand...
Click to collapse
Did you remove the digitizer from the lcd? If yes, I actually don't know what to do; but I used a complete assembly of lcd and digitizer as replacement. It's sticking at the four corners, at least for me.
Its is sticking but slight gap near the ui keys .....
I think there is dust between the screen and the digitizer
Sent from my HTC Desire X
hi help
can i use this
http://www.ebay.in/itm/121348746163?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
or
http://www.ebay.in/itm/151326952917?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
to stick the glass back
which is better to buy
please some one tell fast
Hello,
I'm desperate for some help. My girlfriends Lumia 920 got a cracked glass the other day, so I ordered a brand new OEM digitizer and adhesive and fitted it yesterday. All seemed well. Anyway last night we noticed that the soft keys don't light up anymore.
I assumed they scavenged light from the LCD screen but maybe they don't? Are they on a connector? Are they LED's? Has anyone else made this mistake before and knows how to rectify it, or is it a defective digitizer
Any help?
same issue
I have the same problem , mine worked fine then after replacing the glass/digitizer the touch and the lights at the bottom don't work. with the first one I thought it was bad , so they sent a second one. it does the exact same thing . so either the phone got messed up or maybe the replacements use a new chipset that does not jive well with the phone .if anyone needs parts for their phone I will part this one out. I got a new one from a pawn shop for $150 so it was not worth replacing the whole chaise to fix it ($99 online) . the digitizer/glass is brand new , maybe it will work for someone else and the battery, camera and lcd work fine as do all the buttons and charge ports.
Hii guyzz..
Yesterday my zuk z1 screen got a crack...
Display is working fine..can the digitizer can be replaced without getting a new display??
Sent from my ZUK Z1 using Tapatalk
you have to unglue the lcd from the digitizer/glass (it's a unique part) and replace the last one. it's a very difficult work because the size is very big, i really don't think anybody can do it without a machine.
Luckly for you the lcd + digitizer part already assemblied it's cheap