Please close, solved - AT&T Samsung Galaxy Note I717

I didn't want to start a thread like this but I'm having trouble finding info on this. My mother got a note and I want to get rid of touchwiz and poor jelly bean on so she can use Google now.
When I updated my sensation to jelly bean, the baseband had to be updated first to work with jelly bean. Does the note need among like that? Everything I could find for installing a job ROM has said to just flash.
Already rooted with twrp installed on stock 4.0.4
Got it all done
Sent from my Nexus 7 using xda app-developers app

Closed as OP requested.

Related

Wierd force closes on 4.1.1

Hey guys,
Recently I flashed my galaxy nexus from a yakjuux running 4.0 2 to yakju 4.0.4 then ota'd to 4.1 1. Everything is running fine however every now and then an app (particularly launcher but others have done it too) will force close on me. I'll go check the logcat app to see what happened but nothings in the log it starts again as if just booted. And as I said it's not only launcher, engadget (updated) will close and wipe my logs too. Has anyone else experienced this or know what is going?
Thanks in advance!
Sent from my Galaxy Nexus using xda app-developers app
Usually doing an ota from a rooted rom will cause issues. You might have to re-root and flash a rooted 4.1.1 rom.

Choosing a ROM for my S3

I'm new to flashing ROMs though I already rooted my S3 and have Mobile Odin installed.
Am I right in assuming that most ROMs ate better than the stock Android 4.0.4 firmware for the S3? If so, which is the best ROM that I should be flashing to my device?
A ROM is somewhat of a modified firmware that is based on the stock one, right?
Sent from my GT-I9300 using Tapatalk 2
kevindd992002 said:
I'm new to flashing ROMs though I already rooted my S3 and have Mobile Odin installed.
Am I right in assuming that most ROMs ate better than the stock Android 4.0.4 firmware for the S3? If so, which is the best ROM that I should be flashing to my device?
A ROM is somewhat of a modified firmware that is based on the stock one, right?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Wrong place mate, post in Q&A section
gee2012 said:
Wron section mate, post in Q & A section
Click to expand...
Click to collapse
Yup. I just read in the stickies about the correct section. I am very sorry, mods. I'm using Tapatalk which is why I did not see the stickies right away.
Kindly move this thread to the Q&A section. Thank you.
Sent from my GT-I9300 using Tapatalk 2
lol, don't even ask that question in Q&A. For an easy, flame free life do some research
Sent from my GT-I9300 using Tapatalk 2
You will notice this question has been asked 1000+ times before
And always results in the same answer
No-one can tell you what the best rom is as each individual has a different opinion or specific needs for a ROM
Are you looking for a Ice cream sandwich ROM (AKA ICS) latest official release for S3
Or a Jelly Bean ROM (AKA JB) Based on leaked S3 builds
I personally use Hypergalaxy 1.6 Jelly Bean ROM
All you can do is try a few ROM's an see which one works for you best
Here is a list Of all ROM's and kernals mods etc.
manemzjum said:
You will notice this question has been asked 1000+ times before
And always results in the same answer
No-one can tell you what the best rom is as each individual has a different opinion or specific needs for a ROM
Are you looking for a Ice cream sandwich ROM (AKA ICS) latest official release for S3
Or a Jelly Bean ROM (AKA JB) Based on leaked S3 builds
I personally use Hypergalaxy 1.6 Jelly Bean ROM
All you can do is try a few ROM's an see which one works for you best
Here is a list Of all ROM's and kernals mods etc.
Click to expand...
Click to collapse
+1 for hypergalaxy
manemzjum said:
You will notice this question has been asked 1000+ times before
And always results in the same answer
No-one can tell you what the best rom is as each individual has a different opinion or specific needs for a ROM
Are you looking for a Ice cream sandwich ROM (AKA ICS) latest official release for S3
Or a Jelly Bean ROM (AKA JB) Based on leaked S3 builds
I personally use Hypergalaxy 1.6 Jelly Bean ROM
All you can do is try a few ROM's an see which one works for you best
Here is a list Of all ROM's and kernals mods etc.
Click to expand...
Click to collapse
Thanks, I'll take a look at that.
Sent from my GT-I9300 using Tapatalk 2
My experience with WanamLite is awesome. It's based off of latest XXLDI5 and is amazing.
BTW, you can get Galaxy Note 2's gallery and Camera app from Themes & Apps forum.
tahiriqbal said:
My experience with WanamLite is awesome. It's based off of latest XXLDI5 and is amazing.
BTW, you can get Galaxy Note 2's gallery and Camera app from Themes & Apps forum.
Click to expand...
Click to collapse
What's special with Note2's Gallery and Camera app?
Sent from my GT-I9300 using Tapatalk 2
Thread closed, the only person who knows what you want in a rom is you, use them, try them, and make your own mind up.

[Q] How to get SGH-I777 back to stock

I have been waiting patiently on the Jelly Bean update for the SGH-I777, and finally got frustrated and decided to root and get a custom rom. The walkthrough that I followed apparantly had the I9100 kernel linked so after I finished, I had no modem. I found a flash to stock, but it put me back to Gingerbread and rooted. Also, CWM does not work properly either, I keep getting errors when trying to boot into recovery. So, my question is, how can I fix this or how can return the phone to ICS and wait for Jelly Bean official?
rpeterson251 said:
I have been waiting patiently on the Jelly Bean update for the SGH-I777, and finally got frustrated and decided to root and get a custom rom. The walkthrough that I followed apparantly had the I9100 kernel linked so after I finished, I had no modem. I found a flash to stock, but it put me back to Gingerbread and rooted. Also, CWM does not work properly either, I keep getting errors when trying to boot into recovery. So, my question is, how can I fix this or how can return the phone to ICS and wait for Jelly Bean official?
Click to expand...
Click to collapse
Install mobile odin lite, and flash Siyah gingerbread kernel. That should give you cwm. And then you can flash whatever rom you want.
Ok, got Siyah installed. Now, can you recommend a solid Jelly Bean build?
rpeterson251 said:
Ok, got Siyah installed. Now, can you recommend a solid Jelly Bean build?
Click to expand...
Click to collapse
Just flash a few and find one that meets your needs. Lots to choose from. Good luck, happy flashing
Ok, things have progressed a bit, I have now gotten Siyah to run and downloaded/flashed AOKP's Jelly Bean build but the phone seems to be stuck on the unicorn screen "Initiating Swagger". Any ideas?
Update: After wiping Dalvik and Cache and Data, I have a successful boot!
It's in the Q A section..
Sent from my SAMSUNG-SGH-I777 using xda premium
bqudamith said:
It's in the Q A section..
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
You're a little late..he figured it out.
bqudamith said:
It's in the Q A section..
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Dude. Replying to answered threads or replying with non useful info isn't a good way to increase post count. I've seen you do this on like 4 threads today.
Just a heads up. Your chancesnof getting official JB armless then 1% as att has dropped all update support for it.
Batcom2
zelendel said:
Just a heads up. Your chancesnof getting official JB armless then 1% as att has dropped all update support for it.
Batcom2
Click to expand...
Click to collapse
I've still got faith in the Pirate. Eagerly awaiting Jellybean Binnacle wooot!
Phalanx7621 said:
I've still got faith in the Pirate. Eagerly awaiting Jellybean Binnacle wooot!
Click to expand...
Click to collapse
U mean Beannacle?
brandonarev said:
U mean Beannacle?
Click to expand...
Click to collapse
Hellz yes!

[Q] cant flash 4.2.2

Hello everyone. Ive been running the AOKP 1/22 JB ROM for a little while which I believe is 4.2.1 and wanted to try some other 4.2.2 jelly bean ROMs like cm10 and nexus ROM, but every time that I try to flash it I get an error 7. I remember running into this problem before but I don't remember the solution. Does it have to do about this new MALI driver I've seen mentioned so much? What is it? Please help!
Thanks
First, this should have been posted in the Q & A section.
Second, error 7 is a common issue which you should easily be able to learn about by searching.
It means the flashing firmware is checking the buildprop on your phone for phone model (I777) and finding a mismatch.
aspen1135 said:
Hello everyone. Ive been running the AOKP 1/22 JB ROM for a little while which I believe is 4.2.1 and wanted to try some other 4.2.2 jelly bean ROMs like cm10 and nexus ROM, but every time that I try to flash it I get an error 7. I remember running into this problem before but I don't remember the solution. Does it have to do about this new MALI driver I've seen mentioned so much? What is it? Please help!
Thanks
Click to expand...
Click to collapse
are you USED triangle away?always after it error 7 or flash stock ICS, flash siyah.tar-through Odin and then flash any roms!
Good luck!
aspen1135 said:
Hello everyone. Ive been running the AOKP 1/22 JB ROM for a little while which I believe is 4.2.1 and wanted to try some other 4.2.2 jelly bean ROMs like cm10 and nexus ROM, but every time that I try to flash it I get an error 7. I remember running into this problem before but I don't remember the solution. Does it have to do about this new MALI driver I've seen mentioned so much? What is it? Please help!
Thanks
Click to expand...
Click to collapse
Anytime I run into this issue, I revert to a really old backup (rooted-stock, CM, etc.) and then wipe and flash the ROM. That usually fixes it. Hopefully you have a backup that's compatible. If not, there's a thread around here that explains how to use Heimdell or something to flash a rooted-stock image that you can then use to update to the CM ROM.
It definitely can be done, and it's not too difficult. I've had to do it a time or two. Good luck!
aspen1135 said:
Hello everyone. Ive been running the AOKP 1/22 JB ROM for a little while which I believe is 4.2.1 and wanted to try some other 4.2.2 jelly bean ROMs like cm10 and nexus ROM, but every time that I try to flash it I get an error 7. I remember running into this problem before but I don't remember the solution. Does it have to do about this new MALI driver I've seen mentioned so much? What is it? Please help!
Thanks
Click to expand...
Click to collapse
Flash Siyah 4.3.3 kernel-> Reboot recovery-> Flash the 4.2.2 ROM zip -> You are good to go now.
Sent from my SGH-I777 using xda premium
---------- Post added at 01:30 PM ---------- Previous post was at 01:18 PM ----------
If you are already on Siyah 4.3.3 then Reboot into recovery-> Wipe data/factory reset, cache, dalvik-> Format system-> Reboot recovery-> Flash the 4.2.2 ROM zip. Hope this helps.
Sent from my SGH-I777 using xda premium
I constantly have this problem. I download my ROM of choice, open the zip, edit the updater-script, and delete the asserts inside for get.prop
Sent from my SGH-I777 using xda app-developers app

Take the OTA or stay on 4.1.1 for unlock/root?

Hi all, thanks for having such a helpful support forum. I just picked up a new Note 2 and it is on FW 4.1.1. I want to unlock and root/ROM and was wondering about the recommended sequence.
Should I first use Casual to unlock, or should I take the OTA (which I believe updates the bootloader) then unlock? Is there any benefit or detriment to using one way or the other? Thanks for any help.
Sent from my SCH-I605 using xda premium
Over in origional dev section adam has the new root,jailbreak, recovery for the new 4.1.2 ota. So if you want stock 4.1.2 with root and all that you would be safe to take the ota on stock then run CASUAL. I beleive either way your reallywanting 4.1.2 unlocked so you can have custom roms and ive seen some of the roms being updated for the vramc3 base anyhow. So if want you could run casual now with 4.1.1 that you have (you just picked it up so im assuming its all stock) and flash a cust9m rom that has 4.1.2 already implimented. cheak out the rooting/custom rom guide and the jailbreak thread and decide. In the end both paths will lead to the same place.
Just root/unlock 4.1.1 and flash a 4.1.2 VRAMC3 rom of choice in recovery...
Thanks for the help, I appreciate it. I thought it might be six of one half dozen of the other, but after recently going through OTA he11 on the DNA I'm really leery of any updates.
Sent from my SCH-I605 using xda premium
MunkinDrunky said:
Over in origional dev section adam has the new root,jailbreak, recovery for the new 4.1.2 ota. So if you want stock 4.1.2 with root and all that you would be safe to take the ota on stock then run CASUAL. I beleive either way your reallywanting 4.1.2 unlocked so you can have custom roms and ive seen some of the roms being updated for the vramc3 base anyhow. So if want you could run casual now with 4.1.1 that you have (you just picked it up so im assuming its all stock) and flash a cust9m rom that has 4.1.2 already implimented. cheak out the rooting/custom rom guide and the jailbreak thread and decide. In the end both paths will lead to the same place.
Click to expand...
Click to collapse
Yes, it was 4.1.1 stock. I took your advice and unlocked/rooted in 4.1.1. What is the difference in having a base of vrall4 vs. vramc3? I flashed Jelly Beans and am showing 4.1.2 on vrall4. If I went to a different ROM based on vramc3,would it cause any issues? Thanks for the help and sorry for the n00b questions or if they've been answered a lot, I haven't modded Samsung in a while.
Sent from my SCH-I605 using xda premium
eakeller said:
Yes, it was 4.1.1 stock. I took your advice and unlocked/rooted in 4.1.1. What is the difference in having a base of vrall4 vs. vramc3? I flashed Jelly Beans and am showing 4.1.2 on vrall4. If I went to a different ROM based on vramc3,would it cause any issues? Thanks for the help and sorry for the n00b questions or if they've been answered a lot, I haven't modded Samsung in a while.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Jelly Beans builds 15 and 16 are on the new base, VRAMC3, which is 4.1.2.
eakeller said:
Yes, it was 4.1.1 stock. I took your advice and unlocked/rooted in 4.1.1. What is the difference in having a base of vrall4 vs. vramc3? I flashed Jelly Beans and am showing 4.1.2 on vrall4. If I went to a different ROM based on vramc3,would it cause any issues? Thanks for the help and sorry for the n00b questions or if they've been answered a lot, I haven't modded Samsung in a while.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Many sites have a change log of all the changes that vramc3 brings to the Note 2. I flashed a stock vramc3 ROM that VZW pushed OTA. The only difference is that the Jelly Beans developer (beanstown106) rooted it, replaced the secure bootloader and made it flashable. So I've basically accepted the OTA but I'm still rooted and unlocked.
larry_thagr81 said:
Many sites have a change log of all the changes that vramc3 brings to the Note 2. I flashed a stock vramc3 ROM that VZW pushed OTA. The only difference is that the Jelly Beans developer (beanstown106) rooted it, replaced the secure bootloader and made it flashable. So I've basically accepted the OTA but I'm still rooted and unlocked.
Click to expand...
Click to collapse
Here's what I did: Stock 4.1.1 VRALL4 -> Unlocked/rooted with Casual --> Flashed Jelly Beans build 16
Now in my "About Phone" setup, i have this: Android version 4.1.2; Baseband version I605VRALL4; Build number JZO54K.I605VRAMC3
The build flashed just fine and it appears I'm on VRAMC3. However the baseband remains at VRALL4, I assume because JBeans doesn't update the baseband. Is there any reason to care about the "mismatch" between the baseband and the build? Should I go through the work to update the baseband, and if so what is the best method? I've been looking around the net and have found a bunch of conflicting answers to this question, so hopefully someone can straighten things out regarding the Note 2 specifically.
Thanks for the discussion.
Baseband is the modem. Just download and flash the zip.
Sent from my Note II using Tapatalk 2
eakeller said:
Here's what I did: Stock 4.1.1 VRALL4 -> Unlocked/rooted with Casual --> Flashed Jelly Beans build 16
Now in my "About Phone" setup, i have this: Android version 4.1.2; Baseband version I605VRALL4; Build number JZO54K.I605VRAMC3
The build flashed just fine and it appears I'm on VRAMC3. However the baseband remains at VRALL4, I assume because JBeans doesn't update the baseband. Is there any reason to care about the "mismatch" between the baseband and the build? Should I go through the work to update the baseband, and if so what is the best method? I've been looking around the net and have found a bunch of conflicting answers to this question, so hopefully someone can straighten things out regarding the Note 2 specifically.
Thanks for the discussion.
Click to expand...
Click to collapse
If you look at post #2 in the beans thread, there is a link to the new radio. Flash that and you will be completely up to date.
Sent from my SCH-I605 using Tapatalk 2
randy6675 said:
If you look at post #2 in the beans thread, there is a link to the new radio. Flash that and you will be completely up to date.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Thanks guys, found Scott's zip and flashed the baseband. Everything looks to be consistent, so I'm good.
Sent via Note2 with XDA Premium

Categories

Resources