I've been making little videos for the past couple of days since I bought so much little stuff. I'm exhausted. Basically went to a Verizon store, slapped my DNA down on the mat and it started charging. For something to work so well out of the box, I was a little surprised. Usually just about everything requires some kind of setting modification.
What I was really looking for was a case. I hated the fact that they only had a pink and blue TPU case. The Otterbox did show up online, but neither of the two stores I visited had them. For S&G, I went ahead and asked for the TPU case to try it on. It fits pretty snug, and I have other videos on that. What I really wanted to know is if the DNA would charge with the case on. While he was grabbing the case I hovered the phone over the mat. It charged. Good sign there...
After putting the TPU case on, I tested it out and everything worked. As I went home, I was thinking that the case would probably make the charging really slow. By the end of Black Friday my phone was pretty much dead. I got home, put it on the pad, and it does charge alright. I'll try to run the phone down twice in the future to compare the factory charger with the mat.
With the Otterbox Defender Case
EDIT: Added the video of the Otterbox Defender case. A little less forgiving on the placement. Expect charging times to increase even more. Even with the TPU case it looked like the charge took twice as long as with a MicroUSB cable. This is okay if you're going to have it on the charger more due to ease though.
With the Otterbox Commuter Case
Removal of Speaker from LG WCP-700
Many people don't like the speaker because it will cycle once charged and beep over and over again. Other solution would be to get use to it or take it off the charger once it is charged.
Thanks for this! I know a lot of people asked for that. I believe this charger is from the older gen of the wireless charging standard which allows for a distance of 4mm. So most cases should be fine. Don't quote me on this but the newest revision of the qi standard allows for 40mm which will be very nice. (good for building into desks and such)
Also as a fellow owner of the LG pad, having that extra distance would be nice because sometimes the phone has to be readjusted to get it to work.
Also works perfectly with the Verizon Shell/Holster combo. I keep the shell on for the built-in kickstand and it charges without issues.
thenickisme said:
Thanks for this! I know a lot of people asked for that. I believe this charger is from the older gen of the wireless charging standard which allows for a distance of 4mm. So most cases should be fine. Don't quote me on this but the newest revision of the qi standard allows for 40mm which will be very nice. (good for building into desks and such)
Also as a fellow owner of the LG pad, having that extra distance would be nice because sometimes the phone has to be readjusted to get it to work.
Click to expand...
Click to collapse
No problem. I'm going to have to look at the standards now. I didn't think I'd enjoy this feature as much as I do. That was probably because I assumed the phone had to be naked.
Sent from my HTC6435LVW using Tapatalk 2
DNA with Otterbox
Yes please do keep us posted once you get the otterbox because I'm looking at getting the same setup. I already have the black TPC case but want to go to the Commuter versus the Defender.
Geofiveo said:
Yes please do keep us posted once you get the otterbox because I'm looking at getting the same setup. I already have the black TPC case but want to go to the Commuter versus the Defender.
Click to expand...
Click to collapse
If the Commuter was available I would have ordered it today... I did go ahead and get the Defender. Definitely need to log charge times between all the scenarios.
Bump. Added the video of the Otterbox Defender case. A little less forgiving on the placement. Expect charging times to increase even more. Even with the TPU case it looked like the charge took twice as long as with a MicroUSB cable. This is okay if you're going to have it on the charger more due to ease though.
Can you post a vid of how to take the speaker out of the wireless charging pad please? Thanks in advance.
Sent from my HTC Droid DNA
jonah1234 said:
Can you post a vid of how to take the speaker out of the wireless charging pad please? Thanks in advance.
Sent from my HTC Droid DNA
Click to expand...
Click to collapse
No problem buddy. Just has to encode now (the video). I'm glad you asked me to do it.
*update OP* w/ video of speaker removal
Defender
The otterbox defender case makes wireless charging almost not worth it but i can attest that it does work with the Lg pad from verizon.
Kind of depends on what you're goal is here. I think the wireless charger was designed for longer use from the beginning. Times when you ordinarily wouldn't go through the hassle of putting a phone on the charger, you can.
Related
http://www.ebay.com/itm/USB-Battery...818692?pt=PDA_Accessories&hash=item43aa59c504
Looking to pick one up for primarily charging/syncing but most likely will be just charging since USB charges slower than the wall but I'm not sure if this charger charges at 1A or not.
I just ordered one yesterday. I need it to charge the fat extended batteries in the back slot. I am hoping that that if it doesn't come with a 1.0ma charger, I will be able to use one that I already have and get a decent charge time.
ive bought many ebay docks for many phones from many chineese dealers. these days i only buy from nakedcellphone
Only see one pic in the link when viewing on my phone, maybe there's only 1 pic, not sure. Anyway, from what I can tell, it looks just like the one I have. Mine works great for charging my phone and my HTC and Anker batteries. Phone docks nicely naked, and actually also works with some silicone an tpu cases. Seidio Surface w/kickstand case works, and even my Otterbox Commuter which really surprised me!! The charging tip just barely goes in deep enough to initiate charging with the Commuter. That's the only issue when trying to dock with thicker cases: The phone/case fits in the dock, but the charging tip isn't long enough to initiate charging. I assume that if it was much longer though it would cause the phone to not sit flat because the charging tip wouldn't bottom out in the phone (hope I'm making since here where you can understand me, lol, trying to explain it where it makes since).
Anyway, bottom line is the dock works great and well worth the money. I bought a generic dock for my Evo 4G and it never gave me a single issue. To my knowledge its still working great for the guy who bought my Evo 4G an all accessories... I'm gonna buy a generic Ebay dock for whichever phone I purchase next too. I have yet to see the need to spend more money on a dock with a name printed on it. Most of those don't have a spot in the back to charge an extra battery either, which is an absolute must for me! I probably use the battery charger more than the dock itself. Go for it, you won't be disappointed!!
Swyped from my pimpin PG86100 using XDA Premium, boiiiii!!!
stanglifemike said:
Only see one pic in the link when viewing on my phone, maybe there's only 1 pic, not sure. Anyway, from what I can tell, it looks just like the one I have. Mine works great for charging my phone and my HTC and Anker batteries. Phone docks nicely naked, and actually also works with some silicone an tpu cases. Seidio Surface w/kickstand case works, and even my Otterbox Commuter which really surprised me!! The charging tip just barely goes in deep enough to initiate charging with the Commuter. That's the only issue when trying to dock with thicker cases: The phone/case fits in the dock, but the charging tip isn't long enough to initiate charging. I assume that if it was much longer though it would cause the phone to not sit flat because the charging tip wouldn't bottom out in the phone (hope I'm making since here where you can understand me, lol, trying to explain it where it makes since).
Anyway, bottom line is the dock works great and well worth the money. I bought a generic dock for my Evo 4G and it never gave me a single issue. To my knowledge its still working great for the guy who bought my Evo 4G an all accessories... I'm gonna buy a generic Ebay dock for whichever phone I purchase next too. I have yet to see the need to spend more money on a dock with a name printed on it. Most of those don't have a spot in the back to charge an extra battery either, which is an absolute must for me! I probably use the battery charger more than the dock itself. Go for it, you won't be disappointed!!
Swyped from my pimpin PG86100 using XDA Premium, boiiiii!!!
Click to expand...
Click to collapse
the desktop/full site will show more pictures if you scroll down. can you confirm if it's the same item you have and at what mA it charges at?
Short version:
We would like an extended battery case that slips over our EVO LTE like much like a normal case would. This case would however have a USB that plugs into our phone and adds additional battery life. $49.99 will be a good price. Thanks.
P.S. If someone could please link to the site that makes these power packs, that would be great.
Schlong version:
2000 mAh stock battery won't cut it for me. It's big, but not BBC big. I'm use to a big 3500 mAh battery in my OG Hero/Epic 4G.
I need a nice, big, black, thick, powered battery case to go over my unit. This will ensure it's protected and juiced up. Ya, now getting back to the phone....
The thought of carrying around a big power brick to charge my phone is just disgusting and IDK when it became acceptable to XDA users to do this. You didn't do this when you bought your extended battery for your OG Epic 4G. Might as well just bring your charger and plug it in. I do own a 4000 mAh Energizer power brick and it's cool when I go camping or on road trips.......that's it. Not really on road trips because i'll use a cigarette lighter charger. That's much cooler and I get to annoy the driver and passenger as I sit on the floor between them.
I want to charge my phone over night and be set for two days. I need this power. It is not a question of will I use that much. Yes, yes I will. And you will too. We need an extended battery case similar to the Galaxy S II power pack on youtube. Look it up. You will cry out the code for HTC's kernel. Think about it. You know you want it.
Someting like this
http://androidcommunity.com/powerskin-extended-battery-case-lands-for-the-htc-one-s-20120521/
Sent from ummm ... Give me a day or two so this can say what we are all wanting.
Yes. That's it. The button on the side is hideous.
Sent from my wife's purple Optimus.
The button on the side is the Micro USB adapter that you are using to charge your phone. No button no charge.
Will
I'm looking for something just like that. Hopefully since HTC is moving towards non-removable batteries more companies will put out these kind of products.
i wouldn't mind a case that has a built in swappable battery, and wireless charging
I want one of these for our new phones!!
removed
Having the plug stuck out like that on the silicone portion of the case scares me. Coming from the OG Evo, I'm experiencing the dead usb port problem, which is caused mostly by USB cords being pulled/weighted (e.g. usb cords in cars pulling from below while on landscape). I almost think that something like this needs to be a two piece hard case that slides together from the sides and prevents any flexing of the plug, otherwise we're going to see something like a user accidentally swiping a hard surface with the plug side of the phone and breaking the usb port. Of course, no interchangeable batteries makes this situation a really tough one.
Might be interested if the case WASN'T Silicone... that **** is horrible. Now, TPU or something better like the material used for the Speck iCrap phones, I'm sold!
Check my thread on the official extended battery request.
Seidio is making one.
Sent from my EVO using Tapatalk 2
There is a case being made by seidio
there is a case like that being made from seidio and slated for a july release.....
well i just saw the seidio power case for the iphone, and im very optomistic based on the design for the battery case that it wont add as much bulk as xpal powerskin would add. http://youtu.be/nlfJmmYjPKU
It looks pretty slim before the silicone is added on.
I assume since this is seidio first battery case that their version for the evo 4g lte will look very similar.
Hey everyone,
Just received my Air Dock in the mail and I've had mixed results using my Galaxy Note 3 with it. So rather than buying more cases and QI adapters, throwing stuff at the wall hoping something sticks, I thought we could all band together to find the best setup. This should be a thread for people to post their experiences and post links to the cases and wireless charging adapters they are using with the Air Dock and their GN3.
For those of you unfamiliar with the Air Dock, it's a new Indiegogo backed vehicle mount that employs nano-suction and QI wireless charging. It essentially uses a bunch of tiny suction cups (and some magnets apparently) to bond to your phone with out needing any kinds of harnesses or clips. The only issue seems to be that this tech requires some specific stuff to function well. The back of the phone needs to be high gloss plastic for it to stick well and it can't be too thick (i think .8mm is the max for it to still charge). For phones with matte backs (like the Nexus 5) magnets are an option.
Here is the link to the website and plenty of videos and pictures for those who don't know about it: TheAirDock.com
Ok, so I'll start with my setup and experience and hopefully others will follow along to find the best combination of accessories to get the most out of this dock.
Phone: Black Galaxy Note 3 (Verizon)
-I tried it on the dock with no case and while it holds, I'm not very confident in it. I think it may be the texture of the soft touch back. Also there seems to be magnets in it, which I'm not sure there were supposed to be but they are responding to something in the phone
Case: Black Cruzerlite Hybrid Case for Samsung Galaxy Note 3
-Same deal, it sticks to it but it's not inspiring confidence. It's not a high gloss back, so that's probably the issue (bought it well before the Air Dock). The dock also comes with a magnet sticker to place between the case and phone, and that helps but I haven't been able to get it to register a charge at all with the case on.
QI adapter: Wireless Qi Power Receiver Car Charger NFC For Samsung Note 3 N9000 N9005 BC279
-I think this is the part that has created the biggest issue. It's only ever recognized the charger a handful of times, with and without the back cover on. And even when it recognizes it, it just flashes the "now wireless charging" dealy and then goes back to discharging immediately. I know that the adapter works because it charges fine on my desktop QI charging pad.
It holds GN3 securely?
Jc003125 said:
It holds GN3 securely?
Click to expand...
Click to collapse
Not exactly. If i put it on there with no case and like 15 degrees of back lean it holds decently. The backplate isn't as glossy as it needs to be to hold securely though. It's capable of it, they've shown it holding the various Nexus tablets.
That's kind of what this thread is about, trying to find out the best combination of accessories to make this thing work correctly.
Sent from my Galaxy Note 3 via Tapatalk
i'm still waiting on my airdock, but regarding the QI receiver insert charging/discharging deal, have you tried to rotate the airdock 90 degrees? I've ran across QI chargers where orientation matters.
oilfighter said:
i'm still waiting on my airdock, but regarding the QI receiver insert charging/discharging deal, have you tried to rotate the airdock 90 degrees? I've ran across QI chargers where orientation matters.
Click to expand...
Click to collapse
Hmm. I think that's worth a shot. The dock is weird in that the ball joint faces a specific direction, which is different than the prototypes I saw. And if what you say is true, mounting it on the windshield would make the dock upside down. I'll give that a go when I go to my car in the AM.
Sent from my Galaxy Note 3 via Tapatalk
B1gC72 said:
Hmm. I think that's worth a shot. The dock is weird in that the ball joint faces a specific direction, which is different than the prototypes I saw. And if what you say is true, mounting it on the windshield would make the dock upside down. I'll give that a go when I go to my car in the AM.
Sent from my Galaxy Note 3 via Tapatalk
Click to expand...
Click to collapse
an easier way is to not move the dock, and just rotate your phone 90 degrees (vertical vs. horizontal), and see if that helps with the wireless charging.
B1gC72 said:
Hey everyone,
Just received my Air Dock in the mail and I've had mixed results using my Galaxy Note 3 with it. So rather than buying more cases and QI adapters, throwing stuff at the wall hoping something sticks, I thought we could all band together to find the best setup. This should be a thread for people to post their experiences and post links to the cases and wireless charging adapters they are using with the Air Dock and their GN3.
For those of you unfamiliar with the Air Dock, it's a new Indiegogo backed vehicle mount that employs nano-suction and QI wireless charging. It essentially uses a bunch of tiny suction cups (and some magnets apparently) to bond to your phone with out needing any kinds of harnesses or clips. The only issue seems to be that this tech requires some specific stuff to function well. The back of the phone needs to be high gloss plastic for it to stick well and it can't be too thick (i think .8mm is the max for it to still charge). For phones with matte backs (like the Nexus 5) magnets are an option.
Here is the link to the website and plenty of videos and pictures for those who don't know about it: TheAirDock.com
Ok, so I'll start with my setup and experience and hopefully others will follow along to find the best combination of accessories to get the most out of this dock.
Phone: Black Galaxy Note 3 (Verizon)
-I tried it on the dock with no case and while it holds, I'm not very confident in it. I think it may be the texture of the soft touch back. Also there seems to be magnets in it, which I'm not sure there were supposed to be but they are responding to something in the phone
Case: Black Cruzerlite Hybrid Case for Samsung Galaxy Note 3
-Same deal, it sticks to it but it's not inspiring confidence. It's not a high gloss back, so that's probably the issue (bought it well before the Air Dock). The dock also comes with a magnet sticker to place between the case and phone, and that helps but I haven't been able to get it to register a charge at all with the case on.
QI adapter: Wireless Qi Power Receiver Car Charger NFC For Samsung Note 3 N9000 N9005 BC279
-I think this is the part that has created the biggest issue. It's only ever recognized the charger a handful of times, with and without the back cover on. And even when it recognizes it, it just flashes the "now wireless charging" dealy and then goes back to discharging immediately. I know that the adapter works because it charges fine on my desktop QI charging pad.
Click to expand...
Click to collapse
The receiver you have is not a very good one, its rather weak, i had to add another ferrite or flexi magnet to it so that most of my other transmitter can detect it, but if nfc is a must, you have no choice.
oilfighter said:
an easier way is to not move the dock, and just rotate your phone 90 degrees (vertical vs. horizontal), and see if that helps with the wireless charging.
Click to expand...
Click to collapse
So I tried all orientations and no such luck. I think it's the QI adapter.
Sent from my Galaxy Note 3 via Tapatalk
kms108 said:
The receiver you have is not a very good one, its rather weak, i had to add another ferrite or flexi magnet to it so that most of my other transmitter can detect it, but if nfc is a must, you have no choice.
Click to expand...
Click to collapse
Good to know. NFC isn't a must so could you recommend a better QI adapter for the thread?
Sent from my Galaxy Note 3 via Tapatalk
Would also like to report back on the docks performance today. I had my phone on it (in the case) all day with just a small amount of back lean. It held strong on the drive to and from bwork. I also went for some drinks after work and it held strong to and from along a fairly bumpy road. I still want to find a glossy back case but my confidence is growing in the nano suction as is.
I also wanted to report that I put my old Galaxy S1 in it (only phone I have with a glossy back) and it held just like it does in the videos.
Sent from my Galaxy Note 3 via Tapatalk
B1gC72 said:
Good to know. NFC isn't a must so could you recommend a better QI adapter for the thread?
Sent from my Galaxy Note 3 via Tapatalk
Click to expand...
Click to collapse
There is three
nillkin has one with qi/ s view function
http://forum.xda-developers.com/showthread.php?t=2605204
yijieneng
powerqi with copper coil (non nfc)
yijieneng and powerqi shown below.
Hi Guys,
Just to know if I'm the only one experiencing difficulties with my airdock :
I received my items 2 days ago (I have 2 as a friend also ordered one) and test them with 2 Nexus 4 :
Concerning the suction, it's definitily very very good with the N4 and no case, clearly, no risk to have the phone fall while driving !
So, that was the good news ...
The bad one is that the charging is very unreliable on both airdock pads, but with differents effects :
On the first one, it's very difficult for it to be seen charging by the phone, but when it does, it work for several minutes ... and stop working without apparent reasons ...
On the second one, I experiment the same kind of symptoms as described in the first post : the wireless charging is only seen by the phone for something like 1/2s, and then it's off ...
That's quite a disppointment as otherwise, it holds the phone just fine in the car and I found it very convenient. I hope I was just unlucky with mines, or maybe they suffer from transport (the package shows no evidence of it yet ...).
I contacted Greg, the guy from theAirdock.com to have his advices on the matter, but no answer so far ... I was wondering if I'm the only experimenting those issues ?
rogue931 said:
Hi Guys,
Just to know if I'm the only one experiencing difficulties with my airdock :
I received my items 2 days ago (I have 2 as a friend also ordered one) and test them with 2 Nexus 4 :
Concerning the suction, it's definitily very very good with the N4 and no case, clearly, no risk to have the phone fall while driving !
So, that was the good news ...
The bad one is that the charging is very unreliable on both airdock pads, but with differents effects :
On the first one, it's very difficult for it to be seen charging by the phone, but when it does, it work for several minutes ... and stop working without apparent reasons ...
On the second one, I experiment the same kind of symptoms as described in the first post : the wireless charging is only seen by the phone for something like 1/2s, and then it's off ...
That's quite a disppointment as otherwise, it holds the phone just fine in the car and I found it very convenient. I hope I was just unlucky with mines, or maybe they suffer from transport (the package shows no evidence of it yet ...).
I contacted Greg, the guy from theAirdock.com to have his advices on the matter, but no answer so far ... I was wondering if I'm the only experimenting those issues ?
Click to expand...
Click to collapse
You're not the only one, I had similar issues with my Note 3 (actually why I started this thread). I ended up contacting Greg as well and he recommended I purchase a Qi adapter from their site, which did make it function much more reliably. It's acceptable in my opinion at this point but I'm still not 100% sure it's going to charge or stay charging anytime I set it on the AirDock.
Bad news is, my solution isn't really an option with the N4 since (i believe) the wireless charging is built in. I do believe that the Qi charger in the AirDock is generally weak though since I tried about 3 different Qi adapters before finally buying the one from the AirDock site that worked. Otherwise it would do exactly what yours is doing (got both of the things you described with different adapters). I would say try to exchange your docks.
Something that works for me sometimes if it doesn't start charging right away is to unplug the USB cable from the lighter socket side and plug it back in. Also be sure that you are plugged into the 2.1A socket that it comes with, as i found it won't work with the standard 1A plugs most people have laying around.
I really love the concept of the AirDock and I'm glad I backed it but the build quality is certainly suspect. Mine is starting to fall apart after only a few months (the suction pad part is starting to separate from the housing, i can only assume because of how the phone has to be pulled to remove). I think this is par for the course with beta hardware though. Fortunately, customer service was very accommodating in my experience. Hope you're as fortunate.
Yep, actually, I found the thread on the N5 forum after I put my post here. And there indeed seems to be a few complaints with it
I had ne feedback from Greg sincemy email yesterday, but I figure they may be quite busy those days as many people seems to be receiving them.
Well, I hope he will provide a solution, because, for one of the two, with the same symptoms as yours, I can believe it's a problem with positionning, but for the other, the phone start charging for a few minutes and, without it moving, stops ... To me it sounds more like a loose contact somewhere inside the airdock ...
Well, wait'n see, they say ...
I will keep you posted of Greg's answer ..
Any word on how this works with the Note 3's stock "leather" textured back? Is a case required for it to stay?
Also, has anybody tried it with the Samsung brand wireless charger cover? The Air Dock website suggests that the Samsung brand cover is the best wireless charger receiver available; even better than the ones that Air Dock sells.
do you use the Magnetic Sticker?
For the original poster, how did things work out for you in the end? I have a Nexus 5 and it works extremely well with the AirDock because of the smooth back and also because of the magnets. I'm thinking of going to the Note 4. On the AirDock site it does say the textured back of the Note may not stick too well so they recommend using the magnetic sticker. I have one that come with my AirDock and can't imagine putting that on the back of the phone case. I expect it would be pretty damn ugly.
2xbass said:
For the original poster, how did things work out for you in the end? I have a Nexus 5 and it works extremely well with the AirDock because of the smooth back and also because of the magnets. I'm thinking of going to the Note 4. On the AirDock site it does say the textured back of the Note may not stick too well so they recommend using the magnetic sticker. I have one that come with my AirDock and can't imagine putting that on the back of the phone case. I expect it would be pretty damn ugly.
Click to expand...
Click to collapse
I thought for sure I had already posted this response. I ended up getting an AirDock and the OEM Samsung Wireless charging cover for my Note 3. It's been a good setup. I'm not using the ugly sticker. The magnets in the AirDock seem to hold on to some metal in the wireless cover. It isn't as good as a smooth backed device, but it works for the most part. I'm glad I bought it.
That's good to know. Thanks for replying. One way to get a smoother back and increase the adhesion on the AirDock while avoiding the thickness of a case is to get a vinyl wrap although I'm not sure how they would go with the Samsung wireless back since it looks like the shape especially around the camera is slightly different. I have a D-Brand skin on my Nexus 5 and I really love it and it makes the back even smoother. I just got a Note 4 yesterday and have ordered a third-party Qi receiver coil so I'll see how that goes first. Looks like SlickWraps has some nice vinyl skins for the Note 3 and 4.
Also want to report that yesterday I tried my Note 4 with the AirDock using the standard back. At first it did not adhere at all. However I noticed that surface of my AirDock charging pad was pretty dusty. For my Nexus 5 I had been relying mostly on the magnets to hold the phone there. So I cleaned the AirDock with a bit of water as they recommend and the Note 4 holds very securely now. I think if I add a vinyl skin or a very thin case I think it would be even more secure.
Hello all. A friend of mine developed this new car dock for the Note 3, Galaxy S3, and Galaxy S4. I was lucky enough to get an advanced copy for my GS3 and found it to be the best dock I have ever used. I purchased one for my Note 3 and I did an unboxing. Please give it a look. Thanks
www.mountr.com
Mountr Unbox 2: http://youtu.be/eNrE524swXo
Ohh wow why did I just give another 70bux to Samsung... That mount is perfect
quint9 said:
Hello all. A friend of mine developed this new car dock for the Note 3, Galaxy S3, and Galaxy S4. I was lucky enough to get an advanced copy for my GS3 and found it to be the best dock I have ever used. I purchased one for my Note 3 and I did an unboxing. Please give it a look. Thanks
www.mountr.com
Mountr Unbox 2: http://youtu.be/eNrE524swXo
Click to expand...
Click to collapse
This looks like everything I want, except I wonder about the aluminum back plate. I wonder if it interferes with radio reception at all, as every aluminum case I have used before has. Granted, this is nothing more than a backplate, not an entire wrap around case.
The only option that could possibly make this even better is the option to get an extended backplate for extended batteries...
Thanks for the link
I love it but am sporting a UAG case that has saved me a few times already. Nice work though.
Ed Murray said:
This looks like everything I want, except I wonder about the aluminum back plate. I wonder if it interferes with radio reception at all, as every aluminum case I have used before has. Granted, this is nothing more than a backplate, not an entire wrap around case.
The only option that could possibly make this even better is the option to get an extended backplate for extended batteries...
Thanks for the link
Click to expand...
Click to collapse
I'm also using the cover for the Note 3 and I've checked the impact of the aluminium plate with apps like 'Network Signal Strength' and have not been able to find any negative impact.
Ed Murray said:
This looks like everything I want, except I wonder about the aluminum back plate. I wonder if it interferes with radio reception at all, as every aluminum case I have used before has. Granted, this is nothing more than a backplate, not an entire wrap around case.
The only option that could possibly make this even better is the option to get an extended backplate for extended batteries...
Thanks for the link
Click to expand...
Click to collapse
Hi Ed, I have not noticed a drop in signal but I have not done a switch of the back plate while sitting in several places to test the signal. I would be interested to know if the aluminum on the back has any impact on signal. I would think not because it doesn't wrap around the sides.
Q9
quint9 said:
Hi Ed, I have not noticed a drop in signal but I have not done a switch of the back plate while sitting in several places to test the signal. I would be interested to know if the aluminum on the back has any impact on signal. I would think not because it doesn't wrap around the sides.
Q9
Click to expand...
Click to collapse
Hi Q9.
Radio waves tend to bend around any metal quite well. I expect that is why Mountr has combined ABS/PC with aluminium and designed the aluminium part in such a way that there is enough free space for the radio waves to bend around the plate.
You can search for the app 'Network Signal Strength' in the Play store to get an app that helps you get proper readings of the actual signal strength. Let me know if you come up with different findings.
This is not an inductance charger. There are pins in the mount that hits a ring on the back.
Also there is no nfc in the back, but without a QI coil in the back maybe the battery nfc still works. Doubtful very well with a aluminum back.
I think the $40 wireless auto mount and a $20 samsung QI back is better.
DAvid_B said:
This is not an inductance charger. There are pins in the mount that hits a ring on the back.
Also there is no nfc in the back, but without a QI coil in the back maybe the battery nfc still works. Doubtful very well with a aluminum back.
I think the $40 wireless auto mount and a $20 samsung QI back is better.
Click to expand...
Click to collapse
I'm not sure anyone thought it was, but I guess it's still "wireless", and the OP didn't say anything about induction.
Having a Qi coil on my battery, I use wireless inductive charging for home, often. In the car it would not be as practical, I don't think. Since Qi charging is very under powered, and since we tend to use our phones in the car with navigation, calling, music, etc, I'm doubting any Qi charger would be able to actually stay ahead of the use. (I could be wrong here, but with my Qi pads used in my car, it was useless)
This charger posted above uses the next best idea. And that is why I like it. Maybe not enough to spend that kind of dough on it, but it is a good idea.
I'd like to here for sure if the NFC works, but I betting it does.
It could be even better if it had support for aftermarket cases.
All that being said, if I saw it sold for $40.00 or less, I'd give it a try.
I am using the airdock in my car. It works good. Except I cant use a case with it since the magnet and the suction isn't strong enough to hold it up.
That's my only issue at the moment with it. In my line of work, cases are a priority. Without them, you mine as well not carry it. When/if this idea enables case usage, I will be all over it like white on rice.
Ed Murray said:
I'm not sure anyone thought it was, but I guess it's still "wireless", and the OP didn't say anything about induction.
Having a Qi coil on my battery, I use wireless inductive charging for home, often. In the car it would not be as practical, I don't think. Since Qi charging is very under powered, and since we tend to use our phones in the car with navigation, calling, music, etc, I'm doubting any Qi charger would be able to actually stay ahead of the use. (I could be wrong here, but with my Qi pads used in my car, it was useless)
This charger posted above uses the next best idea. And that is why I like it. Maybe not enough to spend that kind of dough on it, but it is a good idea.
I'd like to here for sure if the NFC works, but I betting it does.
It could be even better if it had support for aftermarket cases.
All that being said, if I saw it sold for $40.00 or less, I'd give it a try.
Click to expand...
Click to collapse
Good news, Mountr recently dropped prices significantly in their web store.
Any idea if the will make one for a Note 4?
Kind of curious: has anyone tried the G3 with an AirDock:
http://www.theairdock.com/
Wondering if the curved back presents any problems with adhering to the micro-suction surface of the dock.
I have one and the charging works great. Only issue is that if the pad or surface isn't clean the phone doesn't like to stay put. The surface is some kind of nano technology. In my opinion it needs to be improved and the magnets need to be improved. The curved back does limit the overall contact surface area but I am getting a new SUPCASE and I am hoping that the material will stick better.
I have the AirDock, and it does not work with my cheap, Chinese Qi charging sticker. The very same sticker works on my Tylt Vu, however. I'm curious what Qi receiver you guys are using.
Thanks!
I found a couple of posts here on XDA that indicated the magnets in the Air Dock interfere with the Qi stickers. Air Dock (the company) doesn't recommend the mount for use with the G3.
meyerweb said:
I found a couple of posts here on XDA that indicated the magnets in the Air Dock interfere with the Qi stickers. Air Dock (the company) doesn't recommend the mount for use with the G3.
Click to expand...
Click to collapse
Though on their website it clearly says supported (with additional hardware.) I assume this to mean with the QuickCircle charging case, which is horrendous and annoying. You are spot-on regarding the magnets. I asked if those can be removed, and support responded that they are necessary to keep the phone from sliding off. I am not convinced that is the case on the G3, because the phone slides off VERY easily without some sort of flat-back.
Sounds like G3 owners should just wait it out...
Me:
Howdy Howdy!
I noticed that the LG G3 is officially 'supported' (with additional hardware,) on your site, and I was curious if any developments have been made? I am still using the cheap Chinese sticker with my Tylt Vu, but of course that doesn't work on my original AirDock. Is there a recommended charging sticker, or do you guys still recommend the Circle case?
In all honesty, it's hard to recommend the naked G3 on the AirDock, because it can barely hold it. I have to clean my foam almost daily for it to stick, because the phone's back is curved. My friends with flat-back phones never seem to ever clean the foam and it works great.
Thank you!
-Steven
AirDock Support:
Hi Steven,
There are a couple things that are going to be better about Version 2.0 and the G3.
The transmitter in V2.0 will work well with that aftermarket receiver sticker. That's the biggest difference. It's an upgraded transmitter from V1.0
We will also be supplying a special version of V2.0 that will be curved to match the back of your G3 so that you can have the same grip strength as your flat backed phone owning friends!
Thanks
Me:
Whoa, that's awesome! I wish there was a trade-in option because I've been pretty bummed about this one, despite getting a few friends to pick one up for their more well-suited phones.
Thank you for the update!
Sounds great, but I already came up with my own solution. I grafted the Qi charger and phone clamp from this:
http://www.amazon.com/gp/product/B00M685JTG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 (made by the same company as the Tylt Vu)
With the sticks-anywhere micro suction base of this:
http://www.amazon.com/iOttie-Windsh...UTF8&qid=1417825105&sr=8-1&keywords=iottie+xl
My only real complaint is that the Qi emits a shrill beeeeep every time it gets power (i.e., when I turn the car on).
But if the Air Dock 2 described above had been available, I probably would have bought that one. Good news for future buyers.
ScrapMaker said:
Sounds like G3 owners should just wait it out...
Me:
Howdy Howdy!
I noticed that the LG G3 is officially 'supported' (with additional hardware,) on your site, and I was curious if any developments have been made? I am still using the cheap Chinese sticker with my Tylt Vu, but of course that doesn't work on my original AirDock. Is there a recommended charging sticker, or do you guys still recommend the Circle case?
In all honesty, it's hard to recommend the naked G3 on the AirDock, because it can barely hold it. I have to clean my foam almost daily for it to stick, because the phone's back is curved. My friends with flat-back phones never seem to ever clean the foam and it works great.
Thank you!
-Steven
AirDock Support:
Hi Steven,
There are a couple things that are going to be better about Version 2.0 and the G3.
The transmitter in V2.0 will work well with that aftermarket receiver sticker. That's the biggest difference. It's an upgraded transmitter from V1.0
We will also be supplying a special version of V2.0 that will be curved to match the back of your G3 so that you can have the same grip strength as your flat backed phone owning friends!
Thanks
Me:
Whoa, that's awesome! I wish there was a trade-in option because I've been pretty bummed about this one, despite getting a few friends to pick one up for their more well-suited phones.
Thank you for the update!
Click to expand...
Click to collapse
I have the original airdock and have been using it with my G3 with no problems. I have a thin ringke case and use the airdock sticker and it charges fine. I'm considering getting the LG g3 slim guard case because I don't like having the sticker on my phone. I read someone on here write that the LG g3 slim guard case sticks to the airdock.
What Qi receiver are you using?
I'm using a replacement battery cover with qi sticker that I bought on Amazon. I'm guessing the company puts the sticker on an oem battery cover but it has qi and nfc
p1garcia said:
I'm using a replacement battery cover with qi sticker that I bought on Amazon. I'm guessing the company puts the sticker on an oem battery cover but it has qi and nfc
Click to expand...
Click to collapse
Strange, then you are the first with an AirDock to get it working with the Qi sticker. I have followed the threads very closely, and even AirDock says it won't work. Do you have a link to the sticker/cover you bought?
Thanks!
I do... But I don't think I can post it. But if you go to Amazon the seller is 38 Ave. It's an oem battery cover with qi and nfc. I also just ordered the LG g3 slim guard case. I've read it works and sticks to the airdock.
I finally received the original LG g3 slim guard case. It is for the US version. It works great with the airdock. Sticks to it and charges it with no issues.
p1garcia said:
I finally received the original LG g3 slim guard case. It is for the US version. It works great with the airdock. Sticks to it and charges it with no issues.
Click to expand...
Click to collapse
When you drive with GPS on, screen on, streaming music over bluetooth, does your battery stay charged? Mine won't even do that with a 2-amp USB connection. :/
ScrapMaker said:
When you drive with GPS on, screen on, streaming music over bluetooth, does your battery stay charged? Mine won't even do that with a 2-amp USB connection. :/
Click to expand...
Click to collapse
Regardless of the input to the Qi charger, current Qi coils output at most 1 amp. But to answer your question, no, mine slowly discharges under the conditions you describe. If you're doing that for a long period, unplug the cable from the dock and plug it into your phone.
meyerweb said:
Regardless of the input to the Qi charger, current Qi coils output at most 1 amp. But to answer your question, no, mine slowly discharges under the conditions you describe. If you're doing that for a long period, unplug the cable from the dock and plug it into your phone.
Click to expand...
Click to collapse
Dang. That's the entire time I've driving -- always. I should have done more research on Qi before ordering the sticker or any of these chargers. My Tylt has an almost impossible time keeping my phone charged when streaming and keeping the screen on at work. Nothing else going. Just heats up like crazy.
ScrapMaker said:
Dang. That's the entire time I've driving -- always. I should have done more research on Qi before ordering the sticker or any of these chargers. My Tylt has an almost impossible time keeping my phone charged when streaming and keeping the screen on at work. Nothing else going. Just heats up like crazy.
Click to expand...
Click to collapse
I don't seem to have any issues when I'm not streaming or using GPS. Just keeping the screen on seems to be fine. Make sure you're using a good USB cable. I found a couple of cheap ones I had wouldn't keep the phone charging consistently - it would keep cycling in and out of charge / discharge modes.
This won't help now, but there's a new Qi standard in development that is supposed to provide higher rates of charge. I do wonder how they'll deal with the extra heat, though.