[Q] [HELP] International S3 has a problem beyond my knowledge. - Galaxy S III Q&A, Help & Troubleshooting

Greetings.
I know this forum can get quite annoyed with posts being repeated and the same question being asked many times over.
I would just like to say that I have searched this forum for the problem I have, however either the posts are beyond my knowledge or not directly related to my issues. If I have missed something please let me know.
First things first. My phone.
I have an International Samsung Galaxy S3
It is running Stock JellyBean 4.1.1 (O2 UK)
It has been rooted with Odin. (I only rooted because I wanted to use Titanium Backup). It has been rooted successfully for about 3 weeks.
I wish I could give the exact firmware and other figures but I can't access them on my phone.
The Problem
Today whilst working at my desk I decide to check my phone but when I look at it there is a message being displayed that states "Encryption Failed". There is some text saying that I need to factory reset my phone and then, below that is a reset button. I press the reset button, the phone reboots to exactly the same screen. I press it again... And again... And again.
Now it boots into CWM-based recovery. Figuring I don't want to screw this phone up further without finding out what the problem is, i restart the phone again. Now the phone just boots into the Samsung logo and then reboots and so the cycle continues.
I have no idea how this happened, it was so random and unexpected.
What should I do?
The good points
I can still get into CWM-Recovery
From reading previous posts I have downloaded Samsung toolkit but its well beyond my capabilities.
The bad points
I haven't a clue what to do
Having only just switched to android and learnt the basics about rooting, I really need some assistance with this problem.
Please, please, if there is anyone on XDA who can help point me in the right direction I would forever be grateful.

Tried flashing a clean, stock ROM from Odin?

robogo1982 said:
Tried flashing a clean, stock ROM from Odin?
Click to expand...
Click to collapse
Thank you. I will look into how to do that. I've only ever rooted, never flashed any kind of ROM. I apologise for my noobness.
The one good thing about this is that I certainly will learn a lot more about my phone in a short space of time.
I will update when I have tried this.
Also will the 'backup and restore' or 'reboot recovery' in CWM be of any use?
Thanks again.
Sent from my Nexus 7 using xda premium

If you made a backup when you rooted with cwm recovery, then I would try to restore it 1st.
Sent from the S3

shinyazz52 said:
If you made a backup when you rooted with cwm recovery, then I would try to restore it 1st.
Sent from the S3
Click to expand...
Click to collapse
Unfortunately I didn't make a backup in CWM, so I cannot restore (I'll be sure too next time though).
Thanks for your suggestion.

Just to update.
Now the phone just gets stuck on the Samsung glowing screen and doesn't keep restarting. I still have access to CWM.
I'm still searching for the Official Jelly Bean ROM to download for my phone.

Starchini said:
Just to update.
Now the phone just gets stuck on the Samsung glowing screen and doesn't keep restarting. I still have access to CWM.
I'm still searching for the Official Jelly Bean ROM to download for my phone.
Click to expand...
Click to collapse
http://www.sammobile.com/

I have now opened Odin3 v1.85.
Interesting to note that the top black bar says 'Epic 4G'. I don't know if that is of any significance.
I've found the ROM which i relevant to my phone, i think (I9300XXDLIB)
Just to ask, I'm not needing to download any firmware? Different firmware versions were the major results i found when searching. I wouldn't be able to tell you what firmware I'm on, other than to say its Stock o2 UK firmware, whatever that maybe.
Thanks again for the replies.
UPDATE:
I just used odin to try and install the new ROM but it failed.
"
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
I don't know what else to try

Starchini said:
I have now opened Odin3 v1.85.
Interesting to note that the top black bar says 'Epic 4G'. I don't know if that is of any significance.
I've found the ROM which i relevant to my phone, i think (I9300XXDLIB)
Just to ask, I'm not needing to download any firmware? Different firmware versions were the major results i found when searching. I wouldn't be able to tell you what firmware I'm on, other than to say its Stock o2 UK firmware, whatever that maybe.
Thanks again for the replies.
Click to expand...
Click to collapse
I think that I9300XXDLIB is a polish firmware , are you sure it wasnt I9300XXDLIH ,that is what comes up on sammobile when searching for the stock o2 jb

shinyazz52 said:
I think that I9300XXDLIB is a polish firmware , are you sure it wasnt I9300XXDLIH ,that is what comes up on sammobile when searching for the stock o2 jb
Click to expand...
Click to collapse
Please can you provide a link? Its my first time on Sammobile so im still trying to find it. Thanks.

Ok.. After that first try failure I've noticed the phone doesn't even get past the Samsung Galaxy s3 boot screen.
I still have access to CWM through pressing the right buttons.

Starchini said:
Please can you provide a link? Its my first time on Sammobile so im still trying to find it. Thanks.
Click to expand...
Click to collapse
Mate I think ( if i remember rightly) you need an account on there to download , but here you are
http://www.sammobile.com/firmware/?page=3&model=GT-I9300&pcode=O2U&os=1&type=1#firmware

shinyazz52 said:
Mate I think ( if i remember rightly) you need an account on there to download , but here you are
http://www.sammobile.com/firmware/?page=3&model=GT-I9300&pcode=O2U&os=1&type=1#firmware
Click to expand...
Click to collapse
I've just created an account with them and am waiting to download the file. My God, if this works you are my freaking savior! My own personal Jesus f**king Christ.
If doesn't I still really appreciate you helping.

Starchini said:
I've just created an account with them and am waiting to download the file. My God, if this works you are my freaking savior! My own personal Jesus f**king Christ.
If doesn't I still really appreciate you helping.
Click to expand...
Click to collapse
Mate I am no expert myself !, just trying to point in right directions. I am wondering if you should do factory reset from recovery before flashing again , anyone else advise please

Starchini said:
I've just created an account with them and am waiting to download the file. My God, if this works you are my freaking savior! My own personal Jesus f**king Christ.
If doesn't I still really appreciate you helping.
Click to expand...
Click to collapse
Alright alright, let's start with some basic stuff here.
1)- Do you have a micro sd card in there? And a card reader to read/write content to it from your PC? (We can use this to flash another ROM directly from CWM).
2)- Did you enter download mode when attempting to flash with ODIN? (Powerdown + Home + Power button)?
Everyone should follow the layout of the first post when asking for help, makes it way easier for people to understand and help.

Skander1998 said:
Alright alright, let's start with some basic stuff here.
1)- Do you have a micro sd card in there? And a card reader to read/write content to it from your PC? (We can use this to flash another ROM directly from CWM).
2)- Did you enter download mode when attempting to flash with ODIN? (Powerdown + Home + Power button)?
Click to expand...
Click to collapse
Hi,
1) Yes I have a micro SD card, which I can use to place files on from my PC.
2) Yes, I entered download mode when flashing to from Odin (The screen with the warning about installing custom software). I clicked ok, and then Odin detected my phone.
I'm currently downloading PDA:I9300XXDLIH & CSC:I9300O2UDLI3 as I'm aware the last ROM could have been the wrong one.
Any assistance would greatly appreciated.

Hope all goes well mate , skander1998 will have much more knowledge than I

shinyazz52 said:
Hope all goes well mate , skander1998 will have much more knowledge than I
Click to expand...
Click to collapse
Thanks for pointing me in the right direction, you may not be an expert but you're one step ahead of me.

Starchini said:
Thanks for pointing me in the right direction, you may not be an expert but you're one step ahead of me.
Click to expand...
Click to collapse
If ODIN doesn't work after all, download Android Revolution or any other stock based ROM, place it in your external SD card, and flash it from CWM, Factory reset and that should work.

Skander1998 said:
If ODIN doesn't work after all, download Android Revolution or any other stock based ROM, place it in your external SD card, and flash it from CWM, Factory reset and that should work.
Click to expand...
Click to collapse
Thank you. I will try this and let you know. Hopefully it will work.

Related

[Q] Bricked my phone and need help pls!! :( :(

hey guys,
i was using bionix-v-1.3.1 custom rom in my vibrant and there was a link in settings to upgrade for a kernal which supports better audio.
so i installed that kernel then my whole internal SD was gone..
so i tried to install bionix-v-1.3.1 again then it gave me an error and i am stucked now
dont know what to do...
please help..............
when i turn on the phone, it says "currupt data partition.. system is not available"
and i have the bionix-v-1.3.1 ROM in internal card but its giving me error and not installing...
you said you tried to reinstall??? if it comes on you are not stuck! you just need to odin back and start over. or atleast thats what i have found out obout the vibrant... ive screwed mine up more than once. infact i tell my friends "if the lights come on, it aint gone"
Can yu boot into recovery?
yes i can go to recovery mode and select.. but selection butons(volume up down) are working wrong.. up is working as down now lol
i dont know how to use ODIN
ODIN back to STOCK (Download Mode)
Just follow this guide, worked every time for me and is always my fail-safe.
http://forum.cyanogenmod.com/topic/...r-vibrant-and-return-to-stock-phone-pc-error/
Twisted galaxy s said:
you said you tried to reinstall??? if it comes on you are not stuck! you just need to odin back and start over. or atleast thats what i have found out obout the vibrant... ive screwed mine up more than once. infact i tell my friends "if the lights come on, it aint gone"
Click to expand...
Click to collapse
yap lights come on and recovery mode works lol... but y cant i install bionix-v-1.3.1 rom from my internal card now ??
do i need a stock ROM ?? cant install bionix-v-1.3.1 now ??
royalkalana said:
i dont know how to use ODIN
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=848737
Check out this thread
royalkalana said:
i dont know how to use ODIN
Click to expand...
Click to collapse
i can sit here and type it all out 1 more time. but it would be easier for both of us if you read through the bible. has links and full of info
By you saying that the volume keys are reversed, it sounds like you flashed a non compatible 19000 kernel or rom. Don't worry you need to do is ODIN back to stock. Take a look at the links the others have provided.
Sent from my GT-I9000 using XDA Premium App
HereĀ“s a link with a video and the files you will need.
http://forum.xda-developers.com/showthread.php?t=810130
thanks guys.. currently downloading j16 odin flashable. hoping to follow steps and make it work lol... i will post if i come up with a problem...
problem!! i cant download root update.zip from the link .it says too much traffic and have been temporarily disabled!.. any other link pls ??
royalkalana said:
problem!! i cant download root update.zip from the link .it says too much traffic and have been temporarily disabled!.. any other link pls ??
Click to expand...
Click to collapse
You can ignore that file, just load the image and the pit file, run the program and yul be fine.
I had the same problem 2 days ago
i think some thins is wrong.. i downloaded T959UVJI6 and 512.pit then started the process..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
nothing after this...
no green bar filling or even started filling.. any ideas pls ?
exit the program and restart the process
jamsun89 said:
exit the program and restart the process
Click to expand...
Click to collapse
done... but the result is same... odin doesnt proceed
and phone displays a "broken connection" mark(yellow question mark between mobile logo and a pc logo) on screen.. it doesn't go off no matter i remove the battery then restart..

[Q] Samsung Galaxy S2 - Bootloop stuck, no recovery mode but do have download mode!

Hello there!
I have read through all the Boot loop posts before anyone asks!
My phone is stuck on the Samsung galaxy s2 boot up with the yellow triangle and the black "!" inside (Boot loop). This happened after flashing the wrong kernel on the device first time. Here is the thing, no matter how many times I try to flash the Kernel which I think is "KH1" (99% sure) in download mode with Odin and all the right drivers installed right from Kies, it still won't work! I've tried stock kernels, insecure kernels... you name it I've tried it!
The phone it's self will go into DOWNLOAD mode (which works fine) , but not RECOVERY MODE at all!
I have been trying for days to fix it, but nothing on here will work.
Please some one get back to me and try to help me fix this problem as I want to use my galaxy s2 again. :/
Thanks, Sam.
Mortonx said:
I have read through all the Boot loop posts before anyone asks!
Click to expand...
Click to collapse
Really?
[READ THIS] Got a Boot Loop? Don't post a New Thread!.
Emphasis on the latter part.
oinkylicious said:
Really?
[READ THIS] Got a Boot Loop? Don't post a New Thread!.
Emphasis on the latter part.
Click to expand...
Click to collapse
Yes I have! What part of this post are you on about? I couldn't find anything on how to fix what problem I have.
Mortonx said:
What part of this post are you on about?
Click to expand...
Click to collapse
This part:
Don't post a New Thread!
oinkylicious said:
This part:
Don't post a New Thread!
Click to expand...
Click to collapse
A link would be helpful please. It was the only way I can get my question answered. I asked on that post and no reply.
Flash stock and you are done
Sent from my GT-I9100 using XDA App
Mortonx said:
A link would be helpful please. It was the only way I can get my question answered. I asked on that post and no reply.
Click to expand...
Click to collapse
A link to what? Neither in this thread nor your original post in the correct thread have you said what happens when you flash with Odin (what errors, what messages, what options you're picking), what ROMs you've tried (I try to flash the Kernel which I think is "KH1" (99% sure) sounds rather flakey).
The full, detailed instructions are in the very first post, here in case you missed it.
If it doesn't work when you follow the instructions to the letter, explain in full what does happen and someone might be able to help you.
Mortonx said:
I've tried stock kernels, insecure kernels... you name it I've tried it!
Click to expand...
Click to collapse
Any ROMs?
pulser_g2 said:
Alternatively, it is possible to flash VillainROM 1.1 if you are not comfortable in wiping via recovery, or if you cannot do so for any reason (corrupted kernel etc), as it wipes all users data when installing. Simply ignore steps 2 to 4, and flash VillainROM 1.1 via ODIN instead of the stock ROM.
Any questions about boot loops? Ask them here rather than making new threads.
Click to expand...
Click to collapse
Cangir said:
Flash stock and you are done
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Tried it, didn't work. :/ I don't think I am using the right stock Kernel though. It said JKH1, but not sure if it is the stock one! Please find a link with a stock one that will work on my phone as none will! Thank you.
oinkylicious said:
A link to what? Neither in this thread nor your original post in the correct thread have you said what happens when you flash with Odin (what errors, what messages, what options you're picking), what ROMs you've tried (I try to flash the Kernel which I think is "KH1" (99% sure) sounds rather flakey).
The full, detailed instructions are in the very first post, here in case you missed it.
If it doesn't work when you follow the instructions to the letter, explain in full what does happen and someone might be able to help you.
Any ROMs?
Click to expand...
Click to collapse
Thanks for finding all of this! I tried VillainROM 1.1, didn't work. Just comes up FAIL on Odin. I also tried CF, clock work and many others as I can't remember as I tired loads. :/ I am really stuck and don't know what to do.
Mortonx said:
Please find a link with a stock one that will work on my phone as none will!
Click to expand...
Click to collapse
Assuming you really do have an I9100, stock ROMs are here [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download and you should probably be looking for a WIPE ROM, such as XXKI3:
Intratech said:
XXKI3
Android 2.3.5
This original (unmodified) Wipe Package with new bootloader has: PDA: XXKI3| Modem/phone: XXKI3| CSC: OXAKI3
Download: http://www.multiupload.com/NJV6PR87Y3
These packages have the new bootloader removed and repacked with the old ones so you can safely reset the binary counter with a Jig.
Click to expand...
Click to collapse
oinkylicious said:
Assuming you really do have an I9100, stock ROMs are here [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download and you should probably be looking for a WIPE ROM, such as XXKI3:
Click to expand...
Click to collapse
Okay thank you, I will give that a try! what shall I do once I have flashed the phone with this wipe rom? Thank you again! Hopefully we should get my phone working by the end of tonight!
Mortonx said:
what shall I do once I have flashed the phone with this wipe rom?
Click to expand...
Click to collapse
Use the phone?
Please make sure you're checking and double checking what you're choosing in Odin, that you have no Kies programs running etc, in other words, read Intratech's posts fully before flashing again!
oinkylicious said:
Use the phone?
Please make sure you're checking and double checking what you're choosing in Odin, that you have no Kies programs running etc, in other words, read Intratech's posts fully before flashing again!
Click to expand...
Click to collapse
Isn't working!! Kies is closed (completely) and it just comes up fail on odin.
Mortonx said:
Isn't working!! Kies is closed (completely) and it just comes up fail on odin.
Click to expand...
Click to collapse
What colour, at what point, is it ever a different colour, is anything happening on the phone? Have you tried different USB ports?
Have you checked task manager for kies related processes? (ctrl+shift+esc, processes), are the drivers correctly installed, what operating system are you using and which architecture? Have you tried it on a different computer?
oinkylicious said:
What colour, at what point, is it ever a different colour, is anything happening on the phone? Have you tried different USB ports?
Have you checked task manager for kies related processes? (ctrl+shift+esc, processes), are the drivers correctly installed, what operating system are you using and which architecture? Have you tried it on a different computer?
Click to expand...
Click to collapse
It says FAIL in red background and black writing and it says "<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Also Checked to see if any Kies programmes was running but there isn't. (Doubled checked in processes as well!)
I am running Windows 7 Home Premium 64 bit and I have tried on a different computer but the phone won't connect at all on that one! (Windows 7 Ultimate 84 bit.)
If you try to flash a multi file firmware and checking re-partition it still fails? I had this by using one file firmwares. Go to Intratech's thread and download a multi file firmware with new bootloaders to get comletely stock. This can not fail.
I have found out that the most stable multi file is xxki3.
While flashing this that way you should not encounter any failures with Odin.
Sent from my GT-I9100 using xda premium
hi guys, any help would really be appreciated.. i think i have the exact same problem as op. let me articulate it in a slightly more clear manner:
1. i flashed an insecure kernel in order to get root access. somewhere along this process somehow something got messed up.
2. the phone is stuck in a bootloop. this shouldnt be a problem! simply flash stock rom/stock modem, enter recovery mode and do a reset!
3. uh-oh. recovery mode crashes instantly, and the endless bootcycle comes back.
4. ive tried using cwm recovery, stock recovery, both of these have failed.
5. download mode works completely fine (using odin 1.85)
im running the AT&T version of galaxy s2 i777, but posting on those forums havent really gotten a solution, with build version UCKH7. I've tried to find a "wipe" package for this build but although i can find stock PDA and stock MODEM, i cannot find stock CSC. in desperation, i have also tried flashing PDA/MODEM/stock PIT at the same time, but this also has not worked. someone on the i777 forums has recommended trying to flash a new bootloader, but im a little wary with taking that step. noone has done it before.
any ideas?
TL;DR: my phone is stuck in a boot loop, but unlike others, recovery mode crashes instantly before i can even explore any options, and reenters bootloop into main android.
Mortonx said:
It says FAIL in red background and black writing and it says "<ID:0/005> Added!!
Click to expand...
Click to collapse
What exactly are you putting into each section in Odin, and which settings are checked? How long does the process take? Did you ever (either when you originally messed it up or while trying to fix it) choose any of the pit/repartition settings? What did you originally flash to cause the problem in the first place?
Is it possible to get screenshots with phone connected before flashing and one afterwards with all the options you're using shown?
This thread mentions something I asked earlier as the solution but you didn't respond to. Have you tried a different USB port and reinstalled the drivers (in Kies: tools -> install driver).
Kies also has a "firmware emergency recovery" though I've got no idea what that does, or if it's recommended to try.
oinkylicious said:
What exactly are you putting into each section in Odin, and which settings are checked? How long does the process take? Did you ever (either when you originally messed it up or while trying to fix it) choose any of the pit/repartition settings? What did you originally flash to cause the problem in the first place?
Is it possible to get screenshots with phone connected before flashing and one afterwards with all the options you're using shown?
This thread mentions something I asked earlier as the solution but you didn't respond to. Have you tried a different USB port and reinstalled the drivers (in Kies: tools -> install driver).
Kies also has a "firmware emergency recovery" though I've got no idea what that does, or if it's recommended to try.
Click to expand...
Click to collapse
It takes like 2 seconds on this one, other kernels which I flash take about 30 seconds then say PASS, but still boot loops. I haven't choose any of the pit/repartition settings. I just flashed the wrong kernel from trying to root the device for the first time, but this just put it into the boot loop.
I am just putting the "New_Bootloader_GT-I9100_OXA_I9100XXKI3_I9100XXKI3_I9100OXAKI3.tar" in into the PDA and then pressing start. I can't put a screen shot up here though as it won't let me.
I have tried different USB ports and reinstalled drivers. I also tried "firmware emergency recovery" but kies doesn't connect to my phone.
mariosraptor said:
If you try to flash a multi file firmware and checking re-partition it still fails?
Click to expand...
Click to collapse
To OP, have you tried this? If all of your attempts thus far have involved a single file, and no repartition, if could be worth a try with one of the packages which has PDA/Phone/CSC as separate files (as on Intratech's description here: http://img94.imageshack.us/img94/8290/odinxm.jpg). Failing that, you could try a ROM which comes with a PIT file to repartition the phone in case the partition table is somehow corrupt/damaged/incorrect, but you might want to consider that a last resort.

Samsung galaxy S4 sch-I545 stuck in Download mode?

After installing TWRP restore via Goomanager (on the play store) I pressed reboot to restore. the phone rebooted to to download mode. I Pulled the battery for 40+ seconds, and pressed the power button, but whatever I do, the phone keeps booting into download mode.
Is it possible to factory reset my phone via Odin?
Phone:
Samsung galaxy S4 sch-I545
Thanks,
Bill The android
Yeah you can do that but dont try installing a recovery again. Im betting youre on me7, and currently its only rootable. No recovery.
When you said factory reset I thought you meant restore. But no, you cant reset via odin. You can turn your phone off and then use the key combo to boot into odin. Itll ask to confirm or deny booting and if you deny your phone will boot normally. Everytime you restart yoll have to do this so eventually youll have to restore through odin.
Sent from my SCH-I545 using Tapatalk 2
Did you try booting into recovery? If you get into recovery try rebooting back to system. Hopefully the phone will boot up normally. You could also do a factory reset if you do get into recovery.
I am having a similar issue -- I am stuck in download mode after attempting TWRP installation. Odin is not responding to my phone once plugged in (only says "connecting"). I am unable to enter recovery mode and am not sure what I should try next. Any suggestions?
This is a new S4 on verizon -- I545/ME7
hexitnow said:
Yeah you can do that but dont try installing a recovery again. Im betting youre on me7, and currently its only rootable. No recovery.
When you said factory reset I thought you meant restore. But no, you cant reset via odin. You can turn your phone off and then use the key combo to boot into odin. Itll ask to confirm or deny booting and if you deny your phone will boot normally. Everytime you restart yoll have to do this so eventually youll have to restore through odin.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
You cant enter recovery because you overwrote the stock one and youre unable to flash/use a custom one because me7 blocked it. There might be a stock recovery posted on the forums but i havent seen one yet. I would try a different usb port, if youre using a pc a few people have had trouble with the front ports. If youre on win 7 try granting admin rights. Try a different pc. Try a different cable are some solutions.
Sent from my SCH-I545 using Tapatalk 2
I see -- I meant Kies was not connecting to the phone in my previous post (not odin). If I am unable to get it to respond, is the best way to restore to a stock phone using Odin?
Wahoogoose said:
I see -- I meant Kies was not connecting to the phone in my previous post (not odin). If I am unable to get it to respond, is the best way to restore to a stock phone using Odin?
Click to expand...
Click to collapse
I have never used kies so cant really say anything about that. But ya odin is best way to restore a phone to stock in my opinion. Like I said There might be an me7 stock recovery posted and that should fix your problem.
Sent from my SCH-I545 using Tapatalk 2
I am having trouble finding the appropriate restore .tar for my phone -- I have been looking at androidfilehost with minimal luck, but I see where other people claim to have found it.
Theyre in the dev section.
Sent from my SCH-I545 using Tapatalk 2
fixed?
has anyone been able to get out the download/ odin mode booting..... i still cant use my phone or enter recovery, if anyone solved this, any help would be appreciated. I am using the galaxy s4 at&t version i337. Please help me i just got the phone 2 days ago lol
Development section.. me7 stock .. Take out Battery start Odon hold volume down plug in usb.. Make sure drivers are installed. . After it says comm. In Pda browse to stock me7.. reinstall battery then start. . You may need a pit file not sure. .when done Reroot.. There is no cwm for me7 yet so your done after rooting don't try cwm or twerp
Can someone point me to the stock ME7?
SO_dank said:
Development section.. me7 stock .. Take out Battery start Odon hold volume down plug in usb.. Make sure drivers are installed. . After it says comm. In Pda browse to stock me7.. reinstall battery then start. . You may need a pit file not sure. .when done Reroot.. There is no cwm for me7 yet so your done after rooting don't try cwm or twerp
Click to expand...
Click to collapse
This is undoubtedly my solution as I did not do enough research before I tried to flash TWRP while running ME7. I'm a complete noob on this forum and when you say dev section, me7 stock; well, I still have no clue how to find it. I would be extremely grateful if someone could take their time and post a link. Thank you guys. Just switched back from iOS and look forward to becoming a part of the android community!
gs4 root
chris17922 said:
has anyone been able to get out the download/ odin mode booting..... i still cant use my phone or enter recovery, if anyone solved this, any help would be appreciated. I am using the galaxy s4 at&t version i337. Please help me i just got the phone 2 days ago lol
Click to expand...
Click to collapse
hold the power button and the down volume key and it should ask you if you want to install a custom os or not and then you just hit cancel and it will boot regularly
WOW
mavratin15 said:
hold the power button and the down volume key and it should ask you if you want to install a custom os or not and then you just hit cancel and it will boot regularly
Click to expand...
Click to collapse
saved my ass.....
how long are you holding down to get that message? mine is just rebooting without asking.
---------- Post added at 04:23 AM ---------- Previous post was at 04:04 AM ----------
bettadaze said:
how long are you holding down to get that message? mine is just rebooting without asking.
Click to expand...
Click to collapse
phew..finally got it...hopefully last of my silly s4 mishaps.
bettadaze said:
how long are you holding down to get that message? mine is just rebooting without asking.
---------- Post added at 04:23 AM ---------- Previous post was at 04:04 AM ----------
phew..finally got it...hopefully last of my silly s4 mishaps.
Click to expand...
Click to collapse
I can get past download mode when I click volume down I get the yellow triangle. When I try to odin back to stock I get error message Need help.
chris17922 said:
has anyone been able to get out the download/ odin mode booting..... i still cant use my phone or enter recovery, if anyone solved this, any help would be appreciated. I am using the galaxy s4 at&t version i337. Please help me i just got the phone 2 days ago lol
Click to expand...
Click to collapse
I did this exact thing, and this guide got it fixed.
http://forum.xda-developers.com/showthread.php?t=2301259
Kodaxx said:
I did this exact thing, and this guide got it fixed.
http://forum.xda-developers.com/showthread.php?t=2301259
Click to expand...
Click to collapse
If you upgraded to MJ7 that link will not help you. You need to Odin a MJ7 stock. I had to do it last night problem is you will lose root. You cant flash back to anything yet if you were on MJ7.
Here is link to zip I had to use. Post #12
http://forum.xda-developers.com/showthread.php?p=47041854#post47041854
get out of downloading loop
I have read all the different ways to get out of a downloading loop with ME7 and none of them worked for me. however, i did find another way that did work.
if your phone boots to downloading every time you boot. I came up with this method. I can only attest that it worked for me.
1. At the downloading screen, plug your phone into your computer
2. Run Odin (I used Odin3 v3.09)
3. Uncheck auto reboot and F. Reset Time
4. Select PIT and load a .pit fil ( I used a file called "SCH-I545.pit" that I downloaded from these forums)
5. Click Start
It will fail and your Message box will look like this
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
6. Now uplug your phone from the computer and reboot.
The only explanation I can come up with is that the partition file info gets corrupted or lost and doing this either rewrites the partition info file or tells the system where to look for it. I could be wrong but it is the only thing that works for me.
good luck!
THANX!!
FIXED!!! thank you, i registered here just to say thanks for posting this. Ive been looking for hrs. and this was all I had to do the whole time. great solution for being stuck on the downloading screen with errors....thank you!!! I thought I ruined my new phone! =D lol:good:

[Q] [SOLVED] My Samsung galaxy s2 just got bricked, & now its between life and death

[Q] [SOLVED] My Samsung galaxy s2 just got bricked, & now its between life and death
Samsung Galaxy S2 LTE
Model name: SHV-E110S
No Custom Binary Download
Current binary is Samsung Official
Jelly bean 4.1.2 (90% sure)
Froze while using it and upon reboot froze at boot screen where the logo of "T" keeps rotating.
Firstly, being myself a complete Noob when it come to stuffs like Custom Roms, firmware, kernel etc got the phone in worse condition.
Upon reading few forums here, tried using Odion3 v 1.85 and tried fixing it following some ideas from these forums:
http://forum.xda-developers.com/showthread.php?t=1457458
http://forum.xda-developers.com/showthread.php?t=2016984
Reckoning that the mobile must have been soft bricked, tried using recovery package which failed as shown below:
http://oi39.tinypic.com/678nls.jpg
Then committed second mistake by using "PIT" file selecting Re Partition. After that on turning on the mobile, instead of BIOS, came "Odion Mode" where additional logo of "Update appears" The failed pic using PIT is shown below:
http://oi40.tinypic.com/14ihn5h.jpg
So, is there any hope for the phone or it's gone? It doesnt gets detected on kies but is detected on odion. I closed the kies in processes in taskmngr too.
So, please tell me what should i download now?
So, please help me everyone. I need all of your guidance.
I wont use that software without any knowledge.
Please tell me the steps to be taken by me now. I badly need that phone. There's no warranty now, so i dont want to go to customer care center.
And is there any way in which none of the files get deleted inside it. It's internal system memory is 2 GB. And USB memory is 12 gb. No SD card inside it.
Thank you!
best of luck
go here
http://forum.xda-developers.com/showpost.php?p=31319717&postcount=495
How?
gohel.vishal said:
go here
http://forum.xda-developers.com/showpost.php?p=31319717&postcount=495
Click to expand...
Click to collapse
I'm so sorry man, but i didnt understand anything from that forum. I mean the forum hasnt provided kernel for the SHV-E110S. I'm a noob. I'm so sorry
sulav_rock said:
Samsung Galaxy S2 LTE
Model name: SHV-E110S
No Custom Binary Download
Current binary is Samsung Official
Jelly bean 4.1.2 (90% sure)
Froze while using it and upon reboot froze at boot screen where the logo of "T" keeps rotating.
Firstly, being myself a complete Noob when it come to stuffs like Custom Roms, firmware, kernel etc got the phone in worse condition.
Upon reading few forums here, tried using Odion3 v 1.85 and tried fixing it following some ideas from these forums:
http://forum.xda-developers.com/showthread.php?t=1457458
http://forum.xda-developers.com/showthread.php?t=2016984
Reckoning that the mobile must have been soft bricked, tried using recovery package which failed as shown below:
http://oi39.tinypic.com/678nls.jpg
Then committed second mistake by using "PIT" file selecting Re Partition. After that on turning on the mobile, instead of BIOS, came "Odion Mode" where additional logo of "Update appears" The failed pic using PIT is shown below:
http://oi40.tinypic.com/14ihn5h.jpg
So, is there any hope for the phone or it's gone? It doesnt gets detected on kies but is detected on odion. I closed the kies in processes in taskmngr too.
So, please tell me what should i download now?
So, please help me everyone. I need all of your guidance.
I wont use that software without any knowledge.
Please tell me the steps to be taken by me now. I badly need that phone. There's no warranty now, so i dont want to go to customer care center.
And is there any way in which none of the files get deleted inside it. It's internal system memory is 2 GB. And USB memory is 12 gb. No SD card inside it.
Thank you!
Click to expand...
Click to collapse
Based on your description of the problem, you should still have Odin download mode, which is good.
Let's first try and restore the phone back to somewhat stock...
Go to this post and download the MH2 pre-rooted stock firmware image (and unpack the zip file).
Flash using Odin, but don't change any of the default options and settings, just specify the tar.md5 file in the PDA section as you've done before...DO NOT TOUCH PIT option.
If Odin fails again, post the screen dump and show us the message log
if Odin succeeds, it will reboot and take a few minutes to initialize the phone (this MH2 image performs an implicit factory reset), you should eventually get the configuration wizard to setup the phone
if possible to enter in download mode then noworry you have chance to get back your device,
but if not then give try on some USB JIG products... (buy from web)
this product let you open download mode by just connecting usb part to device.
once you get enter in download mode you'll safely flash stock rom again.
but this time I suggest you to use ODIN V3.07 (latest version much safer much easier to use)
No problem with download mode
j.posarekar70 said:
if possible to enter in download mode then noworry you have chance to get back your device,
but if not then give try on some USB JIG products... (buy from web)
this product let you open download mode by just connecting usb part to device.
once you get enter in download mode you'll safely flash stock rom again.
but this time I suggest you to use
When i turn on my mobile, it directly opens Download mode. And it wont even close when i press power button. I've to force shut down by taking out the battery. There's no boot screen showing Samsung logo.
Actually i used odin3 v3.09 on first place. I knew nothing about it. so following a forum on recovering soft brick i switched to old version.
Click to expand...
Click to collapse
sulav_rock said:
j.posarekar70 said:
if possible to enter in download mode then noworry you have chance to get back your device,
but if not then give try on some USB JIG products... (buy from web)
this product let you open download mode by just connecting usb part to device.
once you get enter in download mode you'll safely flash stock rom again.
but this time I suggest you to use
When i turn on my mobile, it directly opens Download mode. And it wont even close when i press power button. I've to force shut down by taking out the battery. There's no boot screen showing Samsung logo.
Actually i used odin3 v3.09 on first place. I knew nothing about it. so following a forum on recovering soft brick i switched to old version.
Click to expand...
Click to collapse
You still have Download mode on the Phone, so your bootloader is still ok. Flash a stock rom image with Odin and you should be ok...post your results.
Click to expand...
Click to collapse
Questions
davidcsv said:
Based on your description of the problem, you should still have Odin download mode, which is good.
Let's first try and restore the phone back to somewhat stock...
Go to this post and download the MH2 pre-rooted stock firmware image (and unpack the zip file).
Flash using Odin, but don't change any of the default options and settings, just specify the tar.md5 file in the PDA section as you've done before...DO NOT TOUCH PIT option.
If Odin fails again, post the screen dump and show us the message log
if Odin succeeds, it will reboot and take a few minutes to initialize the phone (this MH2 image performs an implicit factory reset), you should eventually get the configuration wizard to setup the phone
Click to expand...
Click to collapse
first of all, thank u so much for responding. Ok i'll try downloading the pre rooted ROM.
I'll post the results on the thread in the forum after it completes.
Since u're really talented in these stuffs, i wanted to ask u few questions.
1) Will installing Pre Rooted ROM root my device or not? Or do i have to root separately?
2) Will everything get wiped out? I'm sure wallpapers, messages, and settings configurations will be deleted. What about songs, photos? Will the USB storage get wiped out too? btw there's no sd card.
3) Can i recover anything? If yes. how?
sulav_rock said:
first of all, thank u so much for responding. Ok i'll try downloading the pre rooted ROM.
I'll post the results on the thread in the forum after it completes.
Since u're really talented in these stuffs, i wanted to ask u few questions.
1) Will installing Pre Rooted ROM root my device or not? Or do i have to root separately?
2) Will everything get wiped out? I'm sure wallpapers, messages, and settings configurations will be deleted. What about songs, photos? Will the USB storage get wiped out too? btw there's no sd card.
3) Can i recover anything? If yes. how?
Click to expand...
Click to collapse
1) Pre-rooted means just that, it is already rooted for your convenience.
2) Wiping data/cache can be different on different phones. It always wipe the internal data partition (place where app specific data and such are stored) and sometimes the internal user data storage (place where your pictures and other user files are stored). Whether the user data storage is cleared, I can't say for certain, varies between roms and phone models. (external sd card is never cleared, so that's why you should get yourself one and store your data there or in the 'cloud')
3) Depending on what happens in 2), yes or no. If it's wiped, it's gone, if not, then you're lucky I suppose.
When you manage to resurrect the phone, try to follow these rules...
- sync photos with Google+
- keep other data, songs, documents, etc... on the external sd card as much as possible
- sync contact, agenda/calendar, notes, and other personal management data synced with a cloud service (Google+, Exchange, etc...)
- make regular backups with for example Titanium Backup, Super Backup, etc...
- a Samsung account and Google account will help to automatically backup some settings, call logs, etc... (If you let/allow them)
so you have download mode,
download this pre-rooted stock rom here
then this pit file for e110s here
once the files are downloaded,
head to odin then choose pit for the pit file you downloaded
same goes for the pda file
then it should flash without any errors. after that if your phone is stuck in boot animation.
turn off the phone then Reboot to recovery (volume up+volume down+power)
use the volume rockr keys to navigate and power button to select an item.
choose wipe data/factory reset and cache.
flash the rom again without the pit file, only PDA to make sure everything is fine.
it should fix your soft bricked e110s.
Thank you so much.
davidcsv said:
Based on your description of the problem, you should still have Odin download mode, which is good.
Let's first try and restore the phone back to somewhat stock...
Go to this post and download the MH2 pre-rooted stock firmware image (and unpack the zip file).
Flash using Odin, but don't change any of the default options and settings, just specify the tar.md5 file in the PDA section as you've done before...DO NOT TOUCH PIT option.
If Odin fails again, post the screen dump and show us the message log
if Odin succeeds, it will reboot and take a few minutes to initialize the phone (this MH2 image performs an implicit factory reset), you should eventually get the configuration wizard to setup the phone
Click to expand...
Click to collapse
Bro,
Thank you so much for all the trouble you took to help me. Finally, i was successful in fixing it.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> E110SKSJMH2_SLIM_PR20130904.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> userdata.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> sbl2.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> recovery.img
<ID:0/004> param.lfs
<ID:0/004> mdm.bin
<ID:0/004> cache.img.ext4
<ID:0/004> boot.img
<ID:0/004> amss.bin
<ID:0/004> aboot.mbn
<ID:0/004> ums.rfs
<ID:0/004> tomb.img.ext4
<ID:0/004> system.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
really want u to thank from my heart. Not only that, i've actually learned so many things in this 3 days regarding ROMS, multiple zip file etc.
So thanks again
best one??
davidcsv said:
Based on your description of the problem, you should still have Odin download mode, which is good.
Let's first try and restore the phone back to somewhat stock...
Go to this post and download the MH2 pre-rooted stock firmware image (and unpack the zip file).
Flash using Odin, but don't change any of the default options and settings, just specify the tar.md5 file in the PDA section as you've done before...DO NOT TOUCH PIT option.
If Odin fails again, post the screen dump and show us the message log
if Odin succeeds, it will reboot and take a few minutes to initialize the phone (this MH2 image performs an implicit factory reset), you should eventually get the configuration wizard to setup the phone
Click to expand...
Click to collapse
Hi,
I'm sure you've flashed at least once samsung gs2 shv e1102 with custom ROM. Did it work? Actually currently, if it's safe i want to switch to the latest version that's available for my device. The stock is JB 4.1.2 So, is it bad if i use the latest verson which will trigger the status of Rom i guess. If it's actually good then i want to try it. Coz the phone has just been recover. There's no need to backup. And i've always been bothered by the sms limit of 80 letters. More than that, it becomes mms and will be sending failure. So, do u have any suggestions. And if i have to upgrade, which one will be good for me? And is the procedure same? By using Odin software?
sulav_rock said:
Hi,
I'm sure you've flashed at least once samsung gs2 shv e1102 with custom ROM. Did it work? Actually currently, if it's safe i want to switch to the latest version that's available for my device. The stock is JB 4.1.2 So, is it bad if i use the latest verson which will trigger the status of Rom i guess. If it's actually good then i want to try it. Coz the phone has just been recover. There's no need to backup. And i've always been bothered by the sms limit of 80 letters. More than that, it becomes mms and will be sending failure. So, do u have any suggestions. And if i have to upgrade, which one will be good for me? And is the procedure same? By using Odin software?
Click to expand...
Click to collapse
Go to this post and download the GT-I9210 Based MF1 Stock Root Ready rom. Same method as stock images with Odin. This is a regionalized version for the European S2 LTE variant. It works well on the E110S and will take care of that 80 character sms limit.
If you have warranty on the Phone, then you might be worried about triggering the custom binary counter, otherwise, don't worry.
Root/unroot
dc_power! said:
Go to this post and download the GT-I9210 Based MF1 Stock Root Ready rom. Same method as stock images with Odin. This is a regionalized version for the European S2 LTE variant. It works well on the E110S and will take care of that 80 character sms limit.
If you have warranty on the Phone, then you might be worried about triggering the custom binary counter, otherwise, don't worry.
Click to expand...
Click to collapse
Ok i'll download it. btw i dont have warranty coz the phone was bought in south korea itself. I didnt even find a flip cover case for that phone is my country. now the question Is there any latest version of JB where the sms limit has been removed. I mean any custom Rom having version greater than 4.1.2. If yes, which one should i download?
and the procedure is same isnt it? I've go in download mode(odin mode) and flash ROM using Odion on the PDA section isnt it?
sulav_rock said:
Ok i'll download it. btw i dont have warranty coz the phone was bought in south korea itself. I didnt even find a flip cover case for that phone is my country. now the question Is there any latest version of JB where the sms limit has been removed. I mean any custom Rom having version greater than 4.1.2. If yes, which one should i download?
and the procedure is same isnt it? I've go in download mode(odin mode) and flash ROM using Odion on the PDA section isnt it?
Click to expand...
Click to collapse
MF1 is 4.1.2. It is a stock based rom, but is identified as custom because some work had to be done with the boot kernel.
If you want anything later than 4.1.2, google cyanogenmod based roms for the e110s/celox devices. There's enough out there, but you have to put some effort into researching and finding it.
4.2.2
dc_power! said:
MF1 is 4.1.2. It is a stock based rom, but is identified as custom because some work had to be done with the boot kernel.
If you want anything later than 4.1.2, google cyanogenmod based roms for the e110s/celox devices. There's enough out there, but you have to put some effort into researching and finding it.
Click to expand...
Click to collapse
The link u gave me before also had Jelly bean 4.2.2. So if i download and flash that using Odin, will it also remove the sms limit. I actually want to switch from 4.1.2 to 4.2.2. The procedure is same isnt it? Flashing it on Odin. Or do i have to factory reset before flashing?
When i flashed official roms with Odin i never used PIT files. Just out the rom on PDA section and flash it. Usually wipe data/factory reset will erase your data on internal storage card,but in my case is not happeni g. I am trying custom roms on my s2 (i9100) and when i wpie cache,data and delvik,no data is lost from the internal memory. Still got my obb files,music and stuff. Try to flash your device using an official rom and after that i recommend omni 4.4.2. It is very stable for samsung galaxy s2.
Trimis de pe al meu GT-I9100 folosind Tapatalk
Bricked again after 2 years
davidcsv said:
Based on your description of the problem, you should still have Odin download mode, which is good.
Let's first try and restore the phone back to somewhat stock...
Go to this post and download the MH2 pre-rooted stock firmware image (and unpack the zip file).
Flash using Odin, but don't change any of the default options and settings, just specify the tar.md5 file in the PDA section as you've done before...DO NOT TOUCH PIT option.
If Odin fails again, post the screen dump and show us the message log
if Odin succeeds, it will reboot and take a few minutes to initialize the phone (this MH2 image performs an implicit factory reset), you should eventually get the configuration wizard to setup the phone
Click to expand...
Click to collapse
You wouldn't believe it but my phone "Samsung Galaxy s2 LTE SHV E100s" got bricked today after 2 years. Yes i'm still using the same phone. And thank you for helping me out last time my phone got bricked.
I have a question for you. Hope you'll help me out this time too david.
1) Which ROM would be best for my phone now? Currently i had "pre rooted 4.1.2 JB" the one you gave me link. I'm sure you have tested all sorts of ROM's.
2) DO You have any new ROMS for shv e110s? if yes, is the procedure to flash it via odin same as before? e.g leave settings on default, select .tar file on pda section and flash?
Thank you!

"E:Failed to mount [Everything]"

Hello gentlemen, here I am asking for help.
After trying different ROMs, I decided to go back to stock because of the frequent reboots. Today, after a few days since stock, all of a sudden the phone reboots itself and gets stuck on the Galaxy S3 logo (not bootloop). Opening recovery leads to a list of errors similar to this post, if not identical. Alas, being the d***head I am, i didn't backup EFS or system, or at least I don't know where did i put them lol
@xDave7: make shure that the downloaded firmware is correct, and flash it with Odin. Then boot into recovery and do a FactoryReset. If system still won't boot, flash a 3part-rescue-firmware with PIT-file to repartition.
rp158 said:
@xDave7: make shure that the downloaded firmware is correct, and flash it with Odin. Then boot into recovery and do a FactoryReset. If system still won't boot, flash a 3part-rescue-firmware with PIT-file to repartition.
Click to expand...
Click to collapse
Failed, here's the log
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Btw, the firmware I tried to flash was the one Kies gave me, then I downloaded it from sammobile. But since it didn't work out, could you explain me the second method, or link me a guide? Thank you
OP, your eMMC (your phone's, actually) might be on its way to the garbage - and might not. The problem is that if it is - it takes the whole phone with it.
I'd suggest going into the recovery and trying to mount the phone to PC and downloading everything you can - if you can - before doing anything else.
After that, repartition FW + PIT, and if it fails - try working from a different PC. If it fails from any PC when trying to write eMMC - well, then you probably need to buy a new phone.
Repartitioning FW:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
or
http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
Hey @Jack_R1, thanks for your answer. Before I proceed with one of those guides, what do you mean with:
Jack_R1 said:
I'd suggest going into the recovery and trying to mount the phone to PC and downloading everything you can - if you can - before doing anything else.
Click to expand...
Click to collapse
because I think I don't get what you mean
He means adb pull, search for how to use it. But you'll probably find all your data is gone anyhow.
boomboomer said:
He means adb pull, search for how to use it. But you'll probably find all your data is gone anyhow.
Click to expand...
Click to collapse
@boomboomer so is this to save files like pictures, music, videos, etc...? Because if that's the case, it doesn't matter really that much, the important matter is to make this phone work again. So, is there anything else I need to know before going with those guides?
Other that you'll probably need to buy a new phone, no.
boomboomer said:
Other that you'll probably need to buy a new phone, no.
Click to expand...
Click to collapse
Well, that's encouraging lol just out of curiosity, is there a reason becuase it stopped working all of a sudden and ****ed itself up so badly?
Nand memory wear.
Flash an official cwm or stock recovery.
Sent from a stolen phone!

Categories

Resources