Post your benchmark results and battery stats and settings here. I know benchmarks aren't an accurate way to tell whether or not a kernel performs well, but I do find it fun to run benchmarks and see just how fast a device will score. Huge thanks to Ktoonsez for making his kernel for this device! :good:
Ktoonsez "KTManta" kernel can be found here: http://forum.xda-developers.com/showthread.php?p=34687664
1700/1700/performance, cfq
Using the performance governor
Sent from my Nexus 10 using XDA Premium HD app
dipzb90 said:
Using the performance governor
Sent from my Nexus 10 using XDA Premium HD app
Click to expand...
Click to collapse
what app are u guys using?
Xodus83 said:
what app are u guys using?
Click to expand...
Click to collapse
setcpu
before kernel flash 4900, after kernel flash, 4400 twice.
Not using setcpu or anything else, so I'm sure I'm in balanced mode. Still....it went down... bummer
Xodus83 said:
what app are u guys using?
Click to expand...
Click to collapse
I usually use either setcpu or rom toolbox pro if kernel doesn't come with an app. There are quite a few cpu control apps on playstore.. Ktoonsez has an app that comes w/ his kernel on GS3 so thinkin he may make it in this but its very new. This is just build #1. Can't wait till oc is added!! Its gonna be great.
Sent from my SPH-L710 using Xparent Blue Tapatalk 2
i've had to flash back to the stock kernel it's seems that hdmi audio doesn't seem to be working for me..anybody else?
U guys like this, heeeheee
ktoonsez said:
U guys like this, heeeheee
Click to expand...
Click to collapse
What are using to theme your notifications and battery/signal/clock?
Vellamo
Stock 4.2.1:
11/20/2012: Vellamo 1756 / 1156
Paranoid Android 2.99.6 ktmanta 2ghz CPU / 612mhz GPU
12/01/2012: Vellamo 2082 / 1306
Seems to be stable, but I haven't tried any games yet.
Related
hello guys,
its my 2nd day with blackbird(optimus net rom ported by mattof93) now and it seems really promising!
quite impressed with its performace,responsiveness..
initally it was slow,but after flashing paulo v6 touchfix kernel it became really good!
only big bug im suffering from is that usb mass storage doesnt work
however we can go to recovery and toggle usb there and use it!
other than that really small bugs expected to be fixed like autofocus,not switching on nce battery drains to 0%(remove battery and replace) !
so here im sharing a few screenshots of the rom!
i tested neocore yesterday and score was somehwere around 60-64fps (without sound) !mind its a stock modified rom..
games like asphalt 5,dungeon hunter,nfs shift,hero of sparta etc work flawlessly and quite smoothly!
most imprtant it has darktremors a2sd working really well!
have a look at it and if u like just grab it from dev thread ..
guys please vote !!poll on top of the page
some info as provided by matt on performace by kernel :
matteof93 said:
some bench's results:
Paolo's kernel
245\729 smoothass io:deadline vsync: on
antutu: 1529
neocore: 62.4 fps
Franco's kernel:
245\729 smartassv2 io:deadline vsync: on
antutu: 1552
neocore: 61.8 fps
Zacks' kernel
245\729 lightassv2 io:deadline vsync: off
antutu: 1564
neocore: 64.3 fps
Click to expand...
Click to collapse
continuation
Lol... Barack Obama in call logs
BTW how is the battery backup.
Sent from my LG-P500 using XDA App
Battery seams normal but with 3g it drains !just like any other rom
Sent from my LG-P500 using xda premium
Do u use other cm7 based roms before ? If yes whats your opinion comparing with them ?
Zacker90 said:
Do u use other cm7 based roms before ? If yes whats your opinion comparing with them ?
Click to expand...
Click to collapse
i have used almost all the available roms!!
cm7 is cm7!!thats something different cos the entire framework and sources are different!!
however with rc2 and paulo touchfix and a few app management in hand ,i feel this rom attracts me a lot!!!
however this is just rc2!!the stable release will definitely more rocking!hope sodunno when matt is goin to release but hez working on it and has promised to never stop developing on this rom!
androidusero1p500 said:
i have used almost all the available roms!!
cm7 is cm7!!thats something different cos the entire framework and sources are different!!
however with rc2 and paulo touchfix and a few app management in hand ,i feel this rom attracts me a lot!!!
however this is just rc2!!the stable release will definitely more rocking!hope sodunno when matt is goin to release but hez working on it and has promised to never stop developing on this rom!
Click to expand...
Click to collapse
Sorry for being this irritating 'questionare' but could you test asphalt 5 for me?
what's next (RC3):
rom partially deodexed
custom framework
some changes to scripts in init.d and build.prop
new kernel
androidusero1p500 could you add a survey to decide which kernel will be used by default in the RC3?
these are the options:
rome kernel by zacks (better performance)
franco kernel (best compromise between performance and stability)
paolo's kernel (the only kernel which solve the scrolling "bug")
matteof93 said:
what's next (RC3):
rom partially deodexed
custom framework
some changes to scripts in init.d and build.prop
new kernel
androidusero1p500 could you add a survey to decide which kernel will be used by default in the RC3?
these are the options:
rome kernel by zacks (better performance)
franco kernel (best compromise between performance and stability)
paolo's kernel (the only kernel which solve the scrolling "bug")
Click to expand...
Click to collapse
Finally i am willing to flash this rom
waiting for the update
Rutuj said:
Sorry for being this irritating 'questionare' but could you test asphalt 5 for me?
Click to expand...
Click to collapse
Didn't you read what i had written in the first post?
I already tested..works great;-)
Sent from my LG-P500 using xda premium
matteof93 said:
what's next (RC3):
rom partially deodexed
custom framework
some changes to scripts in init.d and build.prop
new kernel
androidusero1p500 could you add a survey to decide which kernel will be used by default in the RC3?
these are the options:
rome kernel by zacks (better performance)
franco kernel (best compromise between performance and stability)
paolo's kernel (the only kernel which solve the scrolling "bug")
Click to expand...
Click to collapse
I think no one would compromise for the scrolling bug !so obviously I'm predicting anyone would recommend paulo 's kernel
Sent from my LG-P500 using xda premium
androidusero1p500 said:
I think no one would compromise for the scrolling bug !so obviously I'm predicting anyone would recommend paulo 's kernel
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
i agree....anyway, please add this survey
matteof93 said:
i agree....anyway, please add this survey
Click to expand...
Click to collapse
Check your pm
Sent from my LG-P500 using xda premium
@androiduser01p500
What version of the rom are u using?
The firestorm or the ICS rom?
Ohh and +1 for paulos kernel in rc3
How are you getting 60 fps??
Im getting 50 at OC 480/729 smartass
Rutuj said:
How are you getting 60 fps??
Im getting 50 at OC 480/729 smartass
Click to expand...
Click to collapse
governor? io scheduler? kernel?
I'm using firestorm n was clocked @122-787 interactive /smartass(dun remmber xactly wich one i was usin).. paulo v6 touch kernel!with darktremor a2sd..
I get minimum 60-62fps ..with ram running at 200mb ..(don't prefer killing em)..
Also I'm using autokiller memory manager pro(plays with minfree also)from market ,it has an option called adanced tweaks too..could that be the reason?
Editrutuj the values i mentioned was without sound !also could you give feedback on your experience with the rom?
Sent from my LG-P500 using xda premium
androidusero1p500 said:
I'm using firestorm n was clocked @122-787 interactive /smartass(dun remmber xactly wich one i was usin).. paulo v6 touch kernel!with darktremor a2sd..
I get minimum 60-62fps ..with ram running at 200mb ..(don't prefer killing em)..
Also I'm using autokiller memory manager pro(plays with minfree also)from market ,it has an option called adanced tweaks too..could that be the reason?
Editrutuj the values i mentioned was without sound !also could you give feedback on your experience with the rom?
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Ok.
Im running firestorm using paulos v6touch kernel at 480/729 smartass, OC using setcpu.
Im also using zepellinrox's v6supercharger, aggressive settings.
The neocore came upto 56~55..The gaming is superb especially HD games.
So, will autokiller memory manager mess up with v6 supercharger settings?
p.s. - Whats the ETA for rc3 ?
Rutuj said:
Ok.
Im running firestorm using paulos v6touch kernel at 480/729 smartass, OC using setcpu.
Im also using zepellinrox's v6supercharger, aggressive settings.
The neocore came upto 56~55..The gaming is superb especially HD games.
So, will autokiller memory manager mess up with v6 supercharger settings?
p.s. - Whats the ETA for rc3 ?
Click to expand...
Click to collapse
Why do you even need autokiller when you have v6supercharger.....Its the same thing
Rutuj said:
Ok.
Im running firestorm using paulos v6touch kernel at 480/729 smartass, OC using setcpu.
Im also using zepellinrox's v6supercharger, aggressive settings.
The neocore came upto 56~55..The gaming is superb especially HD games.
So, will autokiller memory manager mess up with v6 supercharger settings?
p.s. - Whats the ETA for rc3 ?
Click to expand...
Click to collapse
yeah auotkiller mm is simialr to v6 supercharger!
but i heard supercharger is something more than amm!
however you get 55-56 without sounD?
im getting constand scores above 61fps!with 122-787mhz,around 40-60 apps installed a lot of em in there and a lot of ram constanly being used!!
like when i ran neocore i had about 180-200mb free!
Hey All,
I have installed Foxhound ROM for ICS and loaded the Siyah Kernal.. The ROM itself is great, I have also overclocked the CPU to 1.7Ghz, But i see some battery warming issues. I have installed NStools as well.
Any recommendations what under volting can i use with this config?
mateenf said:
Hey All,
I have installed Foxhound ROM for ICS and loaded the Siyah Kernal.. The ROM itself is great, I have also overclocked the CPU to 1.7Ghz, But i see some battery warming issues. I have installed NStools as well.
Any recommendations what under volting can i use with this config?
Click to expand...
Click to collapse
Why overclock,do u experience any difference in speed in daily use,except in benchmark..
Btw an app is installed with siyah called STweaks,it controls all kernel features.read first page post 4-5 by droidphile,excellent guide
zodiaxe66 said:
Why overclock,do u experience any difference in speed in daily use,except in benchmark..
Btw an app is installed with siyah called STweaks,it controls all kernel features.read first page post 4-5 by droidphile,excellent guide
Click to expand...
Click to collapse
Yes I have observed changed after overclocking.. The s3 boots up way faster plus for gaming it showed me real difference specially playing real racing 2 with 1.4 and 1.7..Now I only need to undervolt correctly so I can save on my batter life.. Can we set a custom voltage for 1.7 below stock values??
Sent from my GT-I9300 using xda app-developers app
mateenf said:
Yes I have observed changed after overclocking.. The s3 boots up way faster plus for gaming it showed me real difference specially playing real racing 2 with 1.4 and 1.7..Now I only need to undervolt correctly so I can save on my batter life.. Can we set a custom voltage for 1.7 below stock values??
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
stock voltage for 1.7 ghz is 1400mv, try undervolting by -50mv to -100mv and stick with one which is stable
use setcpu
keep changing it down in increments of 12.5mv and do the strees test keep doing that till u find a value that works
ps once u've done that let's us know what it is.
1088mv for 1200mHz that's the top freq I use so I never played with the voltages for the freq above it.
Hope this helps
remember thanks if it did
Sent from my GT-I9300 using xda premium
---------- Post added at 02:58 PM ---------- Previous post was at 02:01 PM ----------
k did the testing for ya
on MY DEVICE (Every device slightly diff)
1704MHz voltage 1288mv (put in 1290mv it will round it down)
if that don't work or is not stable for u then the next step up is to 1300mv .
775 mv for 100MHz .
hope this helps and if it did thanks is only 1 click away.
Sent from my GT-I9300 using xda premium
bala_gamer said:
stock voltage for 1.7 ghz is 1400mv, try undervolting by -50mv to -100mv and stick with one which is stable
Click to expand...
Click to collapse
Thanks Bala, Stressing the phone to -50mv at the moment.. Have you tried at -100mv? whats the result so far?
Also when charging I observe my phone warming a little.. Is that good?
I recently flashed to 2.45cz firmware and I obtained root access and cwm. What I wanted to know was that does stock kernel allow over-under clocking with antutu cpu master ?? Or I need a custom kernel for that??
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Harsh7689 said:
I recently flashed to 2.45cz firmware and I obtained root access and cwm. What I wanted to know was that does stock kernel allow over-under clocking with antutu cpu master ?? Or I need a custom kernel for that??
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Custom Kernel that supports OC and undervolt.
rhogz said:
Custom Kernel that supports OC and undervolt.
Click to expand...
Click to collapse
I was able to underclock the stock firmware with antutu master!! I underclocked it at 1gz at max and it's working!! I can already see the slight lag even with free ram when playing temple run which was never before!!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Harsh7689 said:
I was able to underclock the stock firmware with antutu master!! I underclocked it at 1gz at max and it's working!! I can already see the slight lag even with free ram when playing temple run which was never before!!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Yes you can underclock but not overclock and/or undervolt stock kernel.
Is it just me or do you think overclocking a 1.5 Ghz device for non-testing purposes is just unnecessary?
Hello all, i have a question, i am using the Phenomenal 3.0 normal version kernel and is using SETCPU apps to manage my CPU speed. However, when i try to set the speed to 1100mhz and above, the CPU speed does not go up to 1100mhz and above, instead it always stay at 1000mhz.
Has anyone experinece this before? if yes, has anyone any steps to resolve this?
Could it be the undervolt issue that is preventing me for going up to 1100mhz?
Thanks.
Looking at the thread it doesn't look like the kernel has overclock capabilities,
slaphead20 said:
Looking at the thread it doesn't look like the kernel has overclock capabilities,
Click to expand...
Click to collapse
I am not trying to overclock, just trying to go to 1400mhz at times but i just cant go past 1000mhz, only when i restart the phone, then it will go to 1400 at times...
seem like i have solve the problem by untick the cpu power saving under the power saving option. However, it seem like the SetCPU apps is useless as i am unable to control the CPU anymore.. is that true? or are there any apps that can overcome this issue?
mrlow81 said:
Hello all, i have a question, i am using the Phenomenal 3.0 normal version kernel and is using SETCPU apps to manage my CPU speed. However, when i try to set the speed to 1100mhz and above, the CPU speed does not go up to 1100mhz and above, instead it always stay at 1000mhz.
Has anyone experinece this before? if yes, has anyone any steps to resolve this?
Could it be the undervolt issue that is preventing me for going up to 1100mhz?
Thanks.
Click to expand...
Click to collapse
Have you tried using other apps, instead of SetCPU, or are you running two CPU-manipulation apps at once?
Try clearing SetCPU's data/cache and try again
I personally use AnTuTu CPU Master, but that is a personal choice, I guess
familyguy59 said:
Have you tried using other apps, instead of SetCPU, or are you running two CPU-manipulation apps at once?
Try clearing SetCPU's data/cache and try again
I personally use AnTuTu CPU Master, but that is a personal choice, I guess
Click to expand...
Click to collapse
I have SETCPU and system tuner pro... does these 2 apps cause the issue that i have?
Phenomenal kernel is a ready to use kernel. You cannot change any settings here in this kernel. It's not like any other kernel wherein gives you the ability to configure the cpu and gpu. Setcpu will only work with other kernels such as SiyahKernel. This will give you the ability to set the cpu and gpu freq and voltage. The power saving mode limits the power of your cpu, thus disabling it will increase cpu freq
Sent from my GT-I9300 using xda app-developers app
BelJanss said:
Phenomenal kernel is a ready to use kernel. You cannot change any settings here in this kernel. It's not like any other kernel wherein gives you the ability to configure the cpu and gpu. Setcpu will only work with other kernels such as SiyahKernel. This will give you the ability to set the cpu and gpu freq and voltage. The power saving mode limits the power of your cpu, thus disabling it will increase cpu freq
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hi, thanks for the info and advise, so can i ask if i revert back to Stock Kernel, i should be able to control my CPU speed?
mrlow81 said:
Hi, thanks for the info and advise, so can i ask if i revert back to Stock Kernel, i should be able to control my CPU speed?
Click to expand...
Click to collapse
No u need a kernel with cpu freq altering capability integrated. Siyah kernel has this I know
Sent from my GT-I9300 using xda app-developers app
I use Tegrak Overclock on stock rooted ROMs. It goes to 1.6Ghz. Works perfectly.
mrlow81 said:
Hi, thanks for the info and advise, so can i ask if i revert back to Stock Kernel, i should be able to control my CPU speed?
Click to expand...
Click to collapse
Nope. Stock kernel will not allow you to change it. If you're on stock ics rom, i would suggest you use siyah kernel v1.5.2. I'm once a user of it. If you need a guide in underclocking and undervolting, you can find the best guide here posted by bala_gamer. You can also settings in his signature which you can use.
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 06:40 PM ---------- Previous post was at 06:37 PM ----------
Here's the link
http://forum.xda-developers.com/showthread.php?t=1827635
Sent from my GT-I9300 using xda app-developers app
BelJanss said:
Nope. Stock kernel will not allow you to change it. If you're on stock ics rom, i would suggest you use siyah kernel v1.5.2. I'm once a user of it. If you need a guide in underclocking and undervolting, you can find the best guide here posted by bala_gamer. You can also settings in his signature which you can use.
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 06:40 PM ---------- Previous post was at 06:37 PM ----------
Here's the link
http://forum.xda-developers.com/showthread.php?t=1827635
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Read my post above. With Tegrak you can overclock stock rooted ROMs.
Baldilocks said:
Read my post above. With Tegrak you can overclock stock rooted ROMs.
Click to expand...
Click to collapse
Yes sir I know. But I just want to give other options. So that he can choose which is good for him. He can overclock upto 1800mhz in siyah kernel. But afaik, he is more on overclocking with undervolting to have performance and battery life.
Sent from my GT-I9300 using xda app-developers app
Thank you all for your good advise... now i know why i cant set my CPU speed due to kernel.
Will look into trying other kernel if i really like to control my CPU.
Baldilocks said:
Read my post above. With Tegrak you can overclock stock rooted ROMs.
Click to expand...
Click to collapse
Pal, i believe you have tired this apps, is this apps dangerous and diffcult to use?
mrlow81 said:
Pal, i believe you have tired this apps, is this apps dangerous and diffcult to use?
Click to expand...
Click to collapse
Nope. Pretty straightforward and it's been around for a while now. Used it with my Galaxy S II as well.
BelJanss said:
Yes sir I know. But I just want to give other options. So that he can choose which is good for him. He can overclock upto 1800mhz in siyah kernel. But afaik, he is more on overclocking with undervolting to have performance and battery life.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
And you are very right!!!!! Doesnt matter what app you use u cant overclock on stock kernel!!!! Stock kernel doesnt have the provision for that. And if members who send links read those links properly before they send them they will realise that you need a kernel that supports overclocking like siyah!!!!!!!!!!!! Stock kernel doesnt.
art_arev said:
And you are very right!!!!! Doesnt matter what app you use u cant overclock on stock kernel!!!! Stock kernel doesnt have the provision for that. And if members who send links read those links properly before they send them they will realise that you need a kernel that supports overclocking like siyah!!!!!!!!!!!! Stock kernel doesnt.
Click to expand...
Click to collapse
You need to actually go look at the Tegrak app before you start typing....
I'm super new to all this but I'm running Beans build 4 with Perseus kernel--works perfect but for some reason in cpu master when I try to overclock the gpu antutu says "gpu control not supported on this device" how can I change that?
iphoneislame said:
I'm super new to all this but I'm running Beans build 4 with Perseus kernel--works perfect but for some reason in cpu master when I try to overclock the gpu antutu says "gpu control not supported on this device" how can I change that?
Click to expand...
Click to collapse
Why aren't youusing the STweaks app??
jmorton10 said:
Why aren't youusing the STweaks app??
Click to expand...
Click to collapse
This.^ The app can control everything from CPU, GPU, audio, etc.
Haha I couldn't find gpu overclocking in stweaks... can you throw a noob a bone and tell me how?
Sent from my SCH-I605 using xda app-developers app
OMG nvm... I found it thanks
Sent from my SCH-I605 using xda app-developers app