[Q] BT Radar Detector & BT Headset - Galaxy S III Q&A, Help & Troubleshooting

Hi all -
I have a Cobra iRadar Detector. It connects to the phone via BT and that is how and were you see your speed and other general radar detector stuff.
I also have a Motorola SD10 BT headset. Since I drive all day, I need the headset to call the office and clients but the radar so I don't get pulled over.
How can I connect both simultaneously? I think I'd have to use the BT headset as Call Only and the BT Radar as Media only. And I'll try that today. But will I have to re-connect each time I turn off the engine and the Radar goes out? Or will it just stay connected? Or is there another way to have two devices connected at the same time?
Of course, if there are other questions I need to ask, please feel free to post those as well.
Theocrat Issak

TheocratIssak said:
Hi all -
I have a Cobra iRadar Detector. It connects to the phone via BT and that is how and were you see your speed and other general radar detector stuff.
I also have a Motorola SD10 BT headset. Since I drive all day, I need the headset to call the office and clients but the radar so I don't get pulled over.
How can I connect both simultaneously? I think I'd have to use the BT headset as Call Only and the BT Radar as Media only. And I'll try that today. But will I have to re-connect each time I turn off the engine and the Radar goes out? Or will it just stay connected? Or is there another way to have two devices connected at the same time?
Of course, if there are other questions I need to ask, please feel free to post those as well.
Theocrat Issak
Click to expand...
Click to collapse
For speed just download a GPS speedometer they are far more accurate than than anything else.
In fact if you get one that saves the data you can use it as evidence to get out of a speeding ticket.
Unless you make a habit of speeding.... tut tut.
Sent from my GT-I9300 using xda premium

I actually use WAZE for GPS, which also has a speedometer and is crowd sourced so that other area drivers can post accidents, traffic jams, police and other useful information. Very handy, and as a person that drives 200+ miles a day in the city, it's useful.
The iRadar detector is just good enough for certain circumstances. I found that by having the BT headset as phone only, the radar detector works the media aspect and thus I'm able to use both - as I'd figured.
When I'm on the BMW motorcycle, speeding isn't an issue, I go so fast you didn't even see me come from behind and pass you.

Related

[Q] Use phone as bluetooth headset for tablet?

Okay this is what I've been wondering...is there anyway to use an Android phone as a bluetooth headset for the Galaxy Tab (or any Android tablet for that matter)? im planning on getting T-Mobile's prepaid Android 2.2 phone and i want to keep my minute usage down by using Google Voice on the tablet. And since they both have bluetooth capabilities it should be possible to use it in this manner, right? I do not want to use one of those hideous, uncomfortable bluetooth headsets because im already going to have a bluetooth device (the phone) with me that im more comfortable using. Is there any way to do this or an app that enables this functionality?
Isn't that like call forwarding or something?
no because your not forwarding your calls, your handling the call over bluetooth. this is what im talking about: people will call my tablet's Google Voice number, and I will be able to use my phone as a bluetooth headset for the tablet to take the call
its the same concept as bluetooth headsets today:
-you get a bluetooth headset
-you pair the headset with your phone
-you take calls on your phone but talk and listen through your bluetooth headset
the way im trying to do this is:
-you get a bluetooth-capable phone
-you pair the phone with your tablet
-you take calls on your tablet but talk and listen through your bluetooth phone
since the phone already has everything that a bluetooth headset has--microphone, earpiece, bluetooth radio-- it should be able to pair with the tablet and work in the same manner as a regular bluetooth headset
yes!
Im looking thos for months my friend. But no one seems to know anything. We are talkin for clever and serius programming so it is not so easy to find sonething.
Profile
I have been looking to do the same thing with my Samsung tab. Instead of walking around stucked to my face.
Yes I could use a BT headset, but it won't dial out. There is a specific Bluetooth profile to do this.
i don't know much about this, but wouldn't the phone would need the bluetooth protocol that a headset uses? someone would have to make a program that would allow the phone to be used as a headset, but then also decide what gets priority if the phone needs to also access the mic or earpiece when you are on a call...
i don't mind simply using a bluetooth - that is more comfortable and flexible than me holding a phone in one hand.
I am seekung solution too.
I'm looking for a solution to this as well. But a different application.
using a tablet as a car-computer.
leave phone in pocket. take and view phone calls though tablet, which is mounted to dash, which is routed to the car audio system with strategically placed microphone built into dash.
I'm surprised no one has made this... seems like something many would be after.
looking for the same here :-(
I want to buy a cheap tablet to leave in the car and use as a gps.
I'd like it to being able to be connected to my phone and work as a bluetooth hands free of sorts.
anyone has 2 android devices to try and connected and see what happens?
Me too - so i'm posting here to show that there is really demand for solution
bump 10char
The Phone app apk is there but it doesn't work Honeycomb, Google Voice also FCs. I think it's because Google knows it would take away from the Android Phones and that would piss off the carriers.
Why should it take people away from carriers? Me want to use my communicator as phone №2, so i could not take from my pocket the first one.
Yuna said:
Why should it take people away from carriers? Me want to use my communicator as phone №2, so i could not take from my pocket the first one.
Click to expand...
Click to collapse
Because you could Google Voice, Skype, etc for a lot cheaper than a carrier.
same same, would be great solution to using tab as a phone
What we are seeking is the Bluetooth HFP (Hands-Free Protocol) (ver. 1.5) HF Profile. Many newer OEM car head-units support the HFP hands-free (HF) mode while most all Android devices and tablets support the audio gateway (AG) mode only.
I am not a developer but I would suspect that getting the AG portion of HFP to work would require changes to the BT drivers. If anyone has the HF mode working on an Android device, please chime in!
ianwood said:
What we are seeking is the Bluetooth HFP (Hands-Free Protocol) (ver. 1.5) HF Profile. Many newer OEM car head-units support the HFP hands-free (HF) mode while most all Android devices and tablets support the audio gateway (AG) mode only.
I am not a developer but I would suspect that getting the AG portion of HFP to work would require changes to the BT drivers. If anyone has the HF mode working on an Android device, please chime in!
Click to expand...
Click to collapse
Do any devs have ideas? This would make tons of tablet owners happy. In an ideal world, we would be able to keep an Android phone in our pocket, and send/receive texts on the tablet through our phone carrier, as well as make and receive calls using our tablets as a Bluetooth speaker phone. This marriage of tablet to phone would be awesome, and generate a lot of money and interest in the app market.
Does anyone know if there has been any progress on using a phone as a bluetooth headset for a tablet? I am trying to figure out how to do this with a samsung galaxy gio and a samsung galaxy tab 7.
junglizste said:
I'm looking for a solution to this as well. But a different application.
using a tablet as a car-computer.
leave phone in pocket. take and view phone calls though tablet, which is mounted to dash, which is routed to the car audio system with strategically placed microphone built into dash.
I'm surprised no one has made this... seems like something many would be after.
Click to expand...
Click to collapse
This is the exact solution I am looking for! Come on developers of the world, how hard can it be!
So is the problem with this that Android doesn't support the necessary profiles in its bluetooth stack? Is there any way to add the profiles ourselves?
It would be nice if a developer would look into this.

[Q] Bluetooth auto connect

I can't see any option anywhere in my SGS2 to set a BT paired device as "authorized". Every time I enter in my car I've to manually select the BT device and start manually the connection.
I searched in the forum but didn't find answers.
I also tried to look at the filesystem and I found auto_pairing.conf file in which there are a lot of BT manufacturer brands listed in sections like "black list", "white list", .... Is it possible I need to manually modify this file to include my BT manufacturer in the white list section? It sounds really strange!
Is there any other way?
I'd love to know that as well.
I atlculay lvoe my sumnasg glxaay s2 wtih VliaRionlm mroe tahn my xobx
Update
I manually modified auto_pairing.conf file adding my car BT manufacturer without any success (I added it in white list with the name already mentioned in the file, so I think that's not a problem of brand name).
My SGS2 continue to ask me to manually select the device to connect to, even if only one BT device is available (car handsfree).
I have the same problem, which i didn't have with my Nexus One running Cynogenmod ROM. I keep my Bluetooth on all the time or most of the time and i would like (like i had in nexus one) when i turn on my car (with Sony MEX-BT3700U car stereo with Bluetooth) that the phone auto-connects with the stereo in a minute or less (or with my plantronics headset when i turn it on), but no, every time i have to go into bluetooth settings and connect on the paired device and then it's connected.
I heard about few application that could help but it would be nice to have it as native function on the phone. I haven't tried these apps yet but if anyone want's to try they can be downloaded from the market, firs is free, the second is not.
https://market.android.com/details?id=a2dp.Vol&feature=search_result
https://market.android.com/details?id=com.btautoconnect&feature=search_result
If anyone can help it would be greatly appreciated
I don't have this problem at all, on any ROM I've tried stock or not. Is your stereo also set up to auto-connect? And is it your phone or your stereo that's refusing the auto connection?
mudferret said:
I don't have this problem at all, on any ROM I've tried stock or not. Is your stereo also set up to auto-connect? And is it your phone or your stereo that's refusing the auto connection?
Click to expand...
Click to collapse
Stereo doesn't have any options, same as Plantronics headset (only ON or OFF), that means that with my old nexus one running CM (or Nokia n95 8GB) when the bluetooth is switched ON and i come near stereo or headset they connect automatically in about 30 seconds max, with my SGS 2 that doesn't happen, i tried everything but it wont auto-connect until i initiate the connection from phone manually.
I have to resolve this because it's killing me !
jartukovic said:
Stereo doesn't have any options
Click to expand...
Click to collapse
I wonder if that's the issue; IIRC it's my stereo that I've told to connect automatically rather than my phone. I'll verify on my commute home today.
Mine auto connects to my JVC car head unit, but doesn't to my Belkin Tunestage. No idea why. As it happens, this suits me but it'd be nice to be able to control it.
And the commute begins. The auto connection is an option on my JVC deck, no such option on the phone.
Sent from my GT-I9100 using XDA App
mudferret said:
I wonder if that's the issue; IIRC it's my stereo that I've told to connect automatically rather than my phone. I'll verify on my commute home today.
Click to expand...
Click to collapse
The stereo is recognized same as Plantronics and that is as a head set, but it doesn't want to automatically connect to either of them, every time i have to initiate the connection. There is one way to connect it (partially automatically ) but that's not the solution - i have to turn on the bluetooth on my phone before starting my car, then when phone is in searching mode if the car is started (stereo turned on) then it will connect automatically, if the search mode (that is active for a short time after turning the bluetooth) ended before i start the car (for instance if i keep my bluetooth on all the time on my phone) then it wont connect automatically.
Am i any clearer about my problem ?
I hear what you're saying but it appears that auto connection is initiated by my stereo. If I turn auto connect off on my stereo there is no connection until I tell my phone to connect. I don't see anything on the gsii settings to have the phone auto initiate the connection. I have a recent JVC deck fwiw.
Sent from my GT-I9100 using XDA App
I will check one more time is there any bluetooth settings on my car stereo, but i'm 90% sure that it doesn't have, because this is the first phone that doesn't connect automatically.
I have had similar issues with mine, it will pair with my Kenwood DNX520VBT but wont auto connect.
however i now have a workaround
Turn bluetooth on your GS2 first, then turn on you Radio. once my Radio boots up it initiates the connection and auto connect works.
if i turn on the bluetooth on my GS2 after my radio it never works.
ive got a sony bt3700 stereo, it connected perfectly with my samsung wave, i just upgraded to a galaxy s and i have to do it manually every time so its not the stereo.
Same thing happened to me, old nexus one with CM7 is connecting ok but i have to connect SGS2 manually or make sure that my bluetooth is ON on my phone before i start the car.
I may have the answer......
Hi,
I have a sort of work around.
My Pioneer head unit refuses to auto connect to my SGS2 and I have to do it manually (I connect from the radio in 4 clicks but thats not the point). This was driving me nuts as previous handsets I owned connected within 5 seconds of being in the car.
I then discovered ROMS and went for the Criskelo ROM and it put me on Android Version 2.3.6 (Not sure if that made a difference or its actually the ROM).
Now with that sorted I found that I have an extra function in my bluetooth settings. When I make the device visible I can then choose the visible time-out length. If I set this to NEVER then I have no problems connecting to the headunit everytime I get in my car.
The only problem I have with this is that I pop my phone into Airplane Mode each night and because that disables the bluetooth it loses the time-out setting so I have to put the time-out back to never each morning.
With setting the time-out to never I'm not sure what battery drain is like because I'm constantly on my phone and my battery depletes rapidly anyway but it seems like a fix for now.
I hope this makes sense and helps people out until a proper fix becomes available.
Cheers,
DJ Sploits
Hi All,
Sorry for bumping an old-ish thread, but it seemed the most appropriate thread, and better than creating a new one of the same topic!
This is what I believe to be true:
*IF* Bluetooth is enabled on the GS2 (and the phone has previously been paired with the car headunit) then when the car is turned on, it will auto-connect to the GS2
*IF* Bluetooth is NOT enabled on the GS2 (and the phone has previously been paired with the car headunit) then when the car is turned on, it will NOT connect to the GS2 (understandably!).
*IF* the phone has previously been paired with the car headunit, and the bluetooth on the GS2 is enabled *AFTER* the car has been started, it does NOT Auto-Connect.
From this, I assume that when the car is powered on, it searches for previously paired handsets in order of most recently connected first. If it finds one, then it WILL connect.
Now:
If I leave Bluetooth enabled on my phone, the battery is significantly depleted my mid-afternoon.
I've started using an app which uses the "rough location" (not GPS) to monitor where the phone is located. If it deemed to have moved in X period of time, then it enables bluetooth.
This is great, and works a charm ... BUT it does mean that bluetooth stack on the GS2 is enabled AFTER the car has been moving for a period of time, and thus does NOT auto-connect.
What I've been searching for is:
"When BT stack is enabled on GS2, can it look for previously paired devices and initiate the connection itself?" (Rather than the car connecting to it?) Is there a script or app to do this?
Hi WTFH,
I think it might be more headunit specific. I always have my bluetooth on but it wont connect automatically to my headunit unless I have it set to constantly discoverable (on the handset).
I also use a power saving program called Green Power Premium which will cut bluetooth/data/wifi after a certain amount of time when the phone is in a sleep state. Its great fro saving power as my phone isnt constantly looking for a wifi signal (I don';t use it to control my bluetooth though as I need it on for my car).
Hey DJ_sploits,
Thanks for that ... Yes, I understand that some headsets do not auto-connect to the GS2 if the phone is NOT visible.
But what does seem to be constant is that the GS2 will not auto-connect to any of the headsets if the bluetooth stack on the GS2 is enabled AFTER the headset has come online and available.
One workaround I'm thinking of is:
Enabling a profile which says "When connected to a power source (I'll have to use the power adaptor) then enable bluetooth". Connecting my phone to the power first before starting the car should enable the BT stack before the headset tries to connect.
In fact I could extend this to say "Only enable bluetooth when using power adaptor, and not connected to wifi".
It's still a pain to do this though, as I tend to just jump into the car and don't want to faff about with connecting this and that.
The only other work around I use is to set the visiblity to constant (depending on what android software version you are on). My headunit always picks the phone up if I have it setup like this. the only thing with that is it will eat the battery even more (which is annoying considering there are other phones out there that constantly have their bluetooth on and you never see the battery getting hammered).
The only flaw I can see in your method is the fact you need a power source to knock on the bluetooth. Great for powersaving but it would then mean you would have to remember to connect it to a car charger everytime you got in the car (not too bad if you have it constantly plugged in to the cigarette lighter) and as you set this can be a bit of a faff.
The only way I can see in sorting this is using a power saving app but having your visibilty constantly on for the bluetooth and then we just hope it doesnt eat the battery too much (not to bad for me as I have a charger at work but could be a pain for others). The only problem with this (apart from the battery issue) is that if you knock the bluetooth off or knock the phone to airplane mode (as I do at nights) then when you knock the bluetooth back on it forgets that you want it to be constantly visible so you have to go through the settings and check the box

Does an app exist to auto-launch an app when bluetooth pairs with a specific device?

I listen to Pandora in my car via bluetooth every time I go somewhere. It's slightly annoying to have to launch the app every time. I'm wondering if there's an app out there that will automatically launch a program when my phone is paired with a specific device (like the Pioneer deck in my car).
I'd like my music to start up automatically when I start my car.
Anyone know of anything?
Thanks!
Locale+Locale Bluetooth Plug-in might solve this issue for you. I'm not allowed to post links but make a search for it on play.google.com.
Instead of Locale, I'd use Tasker. Locale is kind of outdated, and Tasker is less expensive (iirc) and has more support - from both the developer and the community. I never found a real need for the app so I don't know much about it. There is a 7 day trial available on the Tasker website, use that to decide if it can do what you'd like. There may already be a configuration on the website to do what you want to do, so search through those as well.
Try and find the razr's smart actions apk
Sent from my DROID RAZR using XDA
Check out YouBlue
I developed YouBlue for this purpose. It can auto start a variety of music apps on Bluetooth connect, but that's not all. It's a service, so it listens for events like wifi connect/disconnect, Bluetooth connect/disconnect in an attempt to turn your bluetooth adaptor on or off as needed. The algorithm is completely customizable in the settings.
Best of all, it's free. Search for it on the play store or amazon app store. YouBlue - Smart Bluetooth Auto
When I drive away from home in the morning, my phone never leaves my pocket. It detects loss of wifi connection, turns on Bluetooth to see if my car is in range, then once connected, starts pandora.
Bluetooth connect & Play
I would suggest the following application which is custom built for your use case.
As a new user I can't post a direct link to it, but you can find it in the google Play store.
Code:
https://play.google.com/store/apps/details?id=com.cp2.start.and.play.music.player
does youblue have the option to open different apps for different devices?
youblue said:
I developed YouBlue for this purpose. It can auto start a variety of music apps on Bluetooth connect, but that's not all. It's a service, so it listens for events like wifi connect/disconnect, Bluetooth connect/disconnect in an attempt to turn your bluetooth adaptor on or off as needed. The algorithm is completely customizable in the settings.
Best of all, it's free. Search for it on the play store or amazon app store. YouBlue - Smart Bluetooth Auto
When I drive away from home in the morning, my phone never leaves my pocket. It detects loss of wifi connection, turns on Bluetooth to see if my car is in range, then once connected, starts pandora.
Click to expand...
Click to collapse
I am looking for something that will turn on different apps for different devices. I use one app at home on bluetooth speakers and a different one when connected to stereo in the car. Does youblue do this?

i9300 and bluetooth devices.

Hello. First of all I'd like to say thay I had searched the threads as well as play store and google, and did not find any sufficient data on the matter.
I am running Ultima custom ROM on my Galaxy S3 i9300, I might have asked in the ROM thread section, but I am fairly sure this will not be ROM related, more like app related.
I recently bought a stand alone bluetooth keyboard slider case, that my SGS 3 fits in, but it forces me to keep bluetooth enabled all the time. Thus, my Sony Smartwatch that I use keeps connecting all the time via bluetooth as well. Now up to this point I used the bluetooth connection on the smart watch only when needed, for example while driving to switch songs (since the SGS 3 is docked as GPS, channeled by AUX to the car radio), which enabled me to preserve most of the watch battery power (charged it once a week, even less). Now, whenever I have the watch near the phone it will randomly connect on its own, or I make it connect by tapping it one time too many.
Now the question, is there an app somewhere that lets me filter my connected bluetooth devices, and let's say restrict the smart watch on my demand? Any info how to obtain selective bluetooth connectivity, I welcome.
please don't ask questions in this section
I feel like a moron, why didn't I post this in the Q&A -_-'' I'm sory...

[Q] LG G Watch - communication question

Hi guys, I wonder if I could get an answer to something that I can't seem to figure out.
I currently have an HTC One M8, which when I get into my car, automatically pairs to the car's Bluetooth system & allows me to use voice control to dial, and also play music through the car stereo (also via Bluetooth).
What I can't figure out, is if I were to buy a smartwatch (The LG is what i'm looking at), then I assume that the watch connects to the phone using Bluetooth? If that is the case, then what happens, if my phone & watch are currently paired together when I get into my car?
I'm under the impression that Bluetooth only was between 2 devices? If so, would I need to manually disconnect the phone from the watch and then manually connect it to the car? Or would the phone automatically drop the watch connection when it saw the in-car connection available? Or can the phone somehow remain connected to both Bluetooth devices at the same time?
I can't be the only person that might have in-car Bluetooth that's also thinking about/already owns a smartwatch?
Maybe I'm just over-thinking it?
Thanks in advance for any information.
greatcapp said:
Hi guys, I wonder if I could get an answer to something that I can't seem to figure out.
I currently have an HTC One M8, which when I get into my car, automatically pairs to the car's Bluetooth system & allows me to use voice control to dial, and also play music through the car stereo (also via Bluetooth).
What I can't figure out, is if I were to buy a smartwatch (The LG is what i'm looking at), then I assume that the watch connects to the phone using Bluetooth? If that is the case, then what happens, if my phone & watch are currently paired together when I get into my car?
I'm under the impression that Bluetooth only was between 2 devices? If so, would I need to manually disconnect the phone from the watch and then manually connect it to the car? Or would the phone automatically drop the watch connection when it saw the in-car connection available? Or can the phone somehow remain connected to both Bluetooth devices at the same time?
I can't be the only person that might have in-car Bluetooth that's also thinking about/already owns a smartwatch?
Maybe I'm just over-thinking it?
Thanks in advance for any information.
Click to expand...
Click to collapse
I have the Omate Truesmart. I keep it paired to my Note3, and also use LG Tone bt headphones or with my car radio JVC Kameleon. The difference is when you click on the settings icon for the connected device in the BT menu on the phone. It will list the headphones/car radio as phone and media audio and allows me to play music through them or use as bluetooth connection for calls, and skip tracks and play pause. For the watch it lists the connection type as internet use, and I can use the watch to view and skip tracks, view/answer/dismiss calls, reply to notifications. I am guessing the android wear devices will probably work the same way.
ghostfaceg35 said:
I have the Omate Truesmart. I keep it paired to my Note3, and also use LG Tone bt headphones or with my car radio JVC Kameleon. The difference is when you click on the settings icon for the connected device in the BT menu on the phone. It will list the headphones/car radio as phone and media audio and allows me to play music through them or use as bluetooth connection for calls, and skip tracks and play pause. For the watch it lists the connection type as internet use, and I can use the watch to view and skip tracks, view/answer/dismiss calls, reply to notifications. I am guessing the android wear devices will probably work the same way.
Click to expand...
Click to collapse
Many thanks for the reply.
So, for all intents & purposes, I can, in real terms, keep the phone connected to both the watch & the in-car audio at the same time?
yep2345
greatcapp said:
Many thanks for the reply.
So, for all intents & purposes, I can, in real terms, keep the phone connected to both the watch & the in-car audio at the same time?
Click to expand...
Click to collapse
Yes, you can
animefans said:
Yes, you can
Click to expand...
Click to collapse
Thanks very much for your responses guys. I ended up ordering the Samsung instead of the LG in the end (Which is odd, as I dislike their phones).
I have a Galaxy Gear and keep it connected to my phone all the time as well as my LG Tone+ , I haven't experienced any issues with the two. I'm assuming that the Android Wear stuff will work similarly if not better.
Good question
Enviado desde mi GT-S5570I usando Tapatalk 2

Categories

Resources