I am trying to restore an efs back up using a command line however when I run it I get /system/bin/sh: suumount: not found. What do I do to rectify this
1Chef said:
I am trying to restore an efs back up using a command line however when I run it I get /system/bin/sh: suumount: not found. What do I do to rectify this
Click to expand...
Click to collapse
Hi,
according to what Sale adviced you:
- every line constitutes a separated command
- it's not "sumount" but "su" [enter], "unmount /efs" [enter] etc.
Regards
Yay thank you so much except now I have a new problem I can't unmount efs as it is busy how do I stop efs
1Chef said:
Yay thank you so much except now I have a new problem I can't unmount efs as it is busy how do I stop efs
Click to expand...
Click to collapse
Ok, try "umount /efs" and see what happens.
Many40 said:
Ok, try "umount /efs" and see what happens.
Click to expand...
Click to collapse
Yes I type in in terminal emulator unmount/efs and the replie is umount: can't umount /efs: device or resource busy I am trying to do it in aroma file manager in recovery but that doesnt work either
This is what happens
oh dude there is a space in between umount and /efs like this
umount /efs
there is a space in between
1Chef said:
This is what happens
Click to expand...
Click to collapse
But from you screenshot I see that you didn't put [space] between "umount" and "/efs" so try again with "umount /efs" with space between.
If i am using a terminal emulator in recovery I won't need to type in adb shell or su I'll just start with umount /efs??? edit I need su
In recovery in terminal I'm getting
~#adb shell
error device not found
~# su
[email protected]:/ # umount efs
umount efs: can't umount efs: invalid argument
busybox tar zxvf /sdcard/efs-backup.tar.gz -C / for this line to work were would i need to save my efs.tar.gz
Ok I'm nearly there ON the last line see above I get tar: invalid tar magic
I"ve given up as I get stuck on the last line and after alot of googling there is no clear answer on how to fix the tar magic problem I can go back to the standard neat rom with not mods and it doesnt appear to lose its IMIE:laugh:
Related
Hi,
I am trying to alter the boot xml file to get my boot sound back. I am on Modaco 2.5.1 now.
Pulled the boot sound xml file, edited. But when I try push back to phone I get the 'android adb push read-only file system' message.
How do I get round this?
Thanks
Phil
Phil_UK said:
Hi,
I am trying to alter the boot xml file to get my boot sound back. I am on Modaco 2.5.1 now.
Pulled the boot sound xml file, edited. But when I try push back to phone I get the 'android adb push read-only file system' message.
How do I get round this?
Thanks
Phil
Click to expand...
Click to collapse
Do a adb remount before doing the push should solve it.
Thanks
That solved it!
Phil
i'm having the same error when i want to delete stock apps. i'm rooted already, but not sure how to get myself to read write rights. any idea?
Get around read-only
I am having the same problem. Have you had any luck??
woowoowooty said:
I am having the same problem. Have you had any luck??
Click to expand...
Click to collapse
adb remount
"remount failed: Operation not permitted"
you cant do it while in recovery,you have to be booted up.
EXAMPLE to remove Sim Toolkit
adb remount
remount successful
adb shell rm /system/app/Stk.apk
Done...
If you still have problems type adb shell, type su,press allow on your phone screen then try again.
If it shows a $ sign when u type adb shell then u got no root son
................ delete post. ....
sorry but i am quite new to android and rootin... can u please tell me what is recovery and what is boot up.. cause i am facing teh same issue and when i try adb remount from my command prompt, i get permission denied error . Can this also be done from terminal emulator in android.. my device is rooted and i have superuser permission..
thanks in advance,
Rejo
rejo_nazi said:
sorry but i am quite new to android and rootin... can u please tell me what is recovery and what is boot up.. cause i am facing teh same issue and when i try adb remount from my command prompt, i get permission denied error . Can this also be done from terminal emulator in android.. my device is rooted and i have superuser permission..
thanks in advance,
Rejo
Click to expand...
Click to collapse
You can try it in terminal emulator after su.
Code:
$ su
# mount -o rw,remount /system
<do what you want>
# mount -o ro,remount /system
thanks for the information!
Hi.
Samsung Galaxy Ace - FroYo 2.2.1 - Rooted with superuser.
Pulled framework.jar from /system/framework/framework.jar
edited it and now pushing back.
I get
failed to copy 'framework.jar' to '/system/framework/framework.jar': Read-only file system.
I know it's a read-only file system, but I need to push that (and other files) back there.
How to allow that process?
My other option is to "FLASH" a .zip file which contains these files, and I think that puts them in their desired location, but:
What is Flashing and how is it done on my device? I've been googling for a couple hours now with no luck. Adobe Flash is taking all the search results, and some found forum entries aren't helping.
Many thanks, I hope for a quick reply.
Hi, same problem trying to push some libs and framework.jar back to where they originally pulled from. I need to do that for Arabization on Samsung Galaxy Ace running Froyo 2.2.1 with Root.
Error returs "failed: read-only file system"
I've beek googling and searching forums for a couple days now with no luck. Tried many things, commands and chmod which all failed.
The other option, which is to use update.zip on stock recovery to send the files home has failed. Got the following:
Finding update package...
Opening update package...
Installing upate...
E:Error in /sdcard/update.zip (Status 0)
Installation aborted.
I couldn't install ClockworkMod to try it there because Rom Manager does not list my phone (Samsung Galaxy Ace) in the options it gives me when I ask it to Flash ClockworkMod Recovery into my phone. I don't know which phone to choose form the list:
- Huawei Pulse Mini
- Dell Streak
- Huawei Pulse
- Commtiva Z71 (Boston, blaze, and more)
- Geeksphone ONE
- Spice MI700, Commtiva Link N700 and more)
- Huawei Ascend
Halp.
Oh just noticed I have both last posts. How progress works.
By the way,
#mount -o rw,remount /system
does not help. Trying to copy files using 'cp' commant in shell now simply brings 'file exists'. Is there an 'overwrite' attribute to add that'll fix it?
adb remount worked for me thanks..
pigfoot said:
You can try it in terminal emulator after su.
Code:
$ su
# mount -o rw,remount /system
<do what you want>
# mount -o ro,remount /system
Click to expand...
Click to collapse
champagne post. tnx!!!
pigfoot said:
You can try it in terminal emulator after su.
Code:
$ su
# mount -o rw,remount /system
<do what you want>
# mount -o ro,remount /system
Click to expand...
Click to collapse
Worked for me, thank you!
How can I do this without a sd card... thanks in advance.
Sent from my LG-VM670 using Tapatalk
Flash the recovery image?
Root
Adb push a flash_image binary to /system/bin or xbin
adb push recovery.image to /cache or something
flash_image recovery /cache/recovery.img
I'm trying to flash the recovery without a SD card, because my phone can't mount a SD card anymore. So I'm using the recovery here http://www.lg-phones.org/lg-optimus-v-custom-recovery.html and Flash_image to flash it, but I need ADB codes to do so. I'm not very good with ADB, so I need the ones without the flash_image recovery /sdcard/ recovery-thunderc-v-1.2.0-GNM.img /sdcard/ part. :/
Curiousn00b said:
I'm trying to flash the recovery without a SD card, because my phone can't mount a SD card anymore. So I'm using the recovery here http://www.lg-phones.org/lg-optimus-v-custom-recovery.html and Flash_image to flash it, but I need ADB codes to do so. I'm not very good with ADB, so I need the ones without the flash_image recovery /sdcard/ recovery-thunderc-v-1.2.0-GNM.img /sdcard/ part. :/
Click to expand...
Click to collapse
It the same thing as tvall has mentioned but I will make it more easy for you.
As mentioned in the link that you have provided, just do this instead:
A) Type in 'adb remount'
B) Copy recovery-thunderc-v-1.2.0-GNM.img to platform-tools directory where android SDK is installed.
C) Do a 'adb push recovery-thunderc-v-1.2.0-GNM.img /system/xbin'
[Now the recovery image is inside your phones memory @/system/xbin location]
Following are the existing steps from the link: Modified step is made bold.
1) mount -o remount,rw -t yaffs2 /dev/block/mtdblock5 /system
2) cat /sdcard/flash_image > /system/bin/flash_image
3) chmod 755 /system/bin/flash_image
4) mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.bak
5) mount -o remount,ro -t yaffs2 /dev/block/mtdblock5 /system
6) flash_image recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
7) reboot recover
tvall said:
Flash the recovery image?
Root
Adb push a flash_image binary to /system/bin or xbin
adb push recovery.image to /cache or something
flash_image recovery /cache/recovery.img
Click to expand...
Click to collapse
developer++ said:
It the same thing as tvall has mentioned but I will make it more easy for you.
As mentioned in the link that you have provided, just do this instead:
A) Type in 'adb remount'
B) Copy recovery-thunderc-v-1.2.0-GNM.img to platform-tools directory where android SDK is installed.
C) Do a 'adb push recovery-thunderc-v-1.2.0-GNM.img /system/xbin'
[Now the recovery image is inside your phones memory @/system/xbin location]
Following are the existing steps from the link: Modified step is made bold.
1) mount -o remount,rw -t yaffs2 /dev/block/mtdblock5 /system
2) cat /sdcard/flash_image > /system/bin/flash_image
3) chmod 755 /system/bin/flash_image
4) mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.bak
5) mount -o remount,ro -t yaffs2 /dev/block/mtdblock5 /system
6) flash_image recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
7) reboot recover
Click to expand...
Click to collapse
Thanks alot guys, I really appreciate it, but I get stuck at
C:\android-sdk\platform-tools>adb remount
remount succeeded
C:\android-sdk\platform-tools>adb push recovery-thunderc-v-1.2.0-GNM.img /system
/xbin
cannot stat 'recovery-thunderc-v-1.2.0-GNM.img': No such file or directory
C:\android-sdk\platform-tools>
I'm starting to learn more, as I knew alot back when I first rooted my phone. As time went by..... easier ways were made.
Help plz.
EDIT: Been messing around with it, but still no go. This is what I got. Keep in mind I messed with some stuff if it doesn't look right..... :s
C:\android-sdk\platform-tools>adb remount
remount succeeded
C:\android-sdk\platform-tools>adb shell
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock5 /system
mount -o remount,rw -t yaffs2 /dev/block/mtdblock5 /system
# chmod 755 /system/bin/flash_image
chmod 755 /system/bin/flash_image
# mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.bak
mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.bak
mv: can't rename '/system/etc/install-recovery.sh': No such file or directory
# mount -o remount,ro -t yaffs2 /dev/block/mtdblock5 /system
mount -o remount,ro -t yaffs2 /dev/block/mtdblock5 /system
# flash_image recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
flash_image recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
failed with error: -1
error reading /system/xbin/recovery-thunderc-v-1.2.0-GNM.img header# flash_image
recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
flash_image recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
failed with error: -1
error reading /system/xbin/recovery-thunderc-v-1.2.0-GNM.img header# /system/xbi
n/flash_image recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
/system/xbin/flash_image recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
/system/xbin/flash_image: permission denied
#
Bump...
Sent from my LG-VM670 using Tapatalk
I have made inline comments. Just take note of it.
Curiousn00b said:
C:\android-sdk\platform-tools>adb remount
remount succeeded
C:\android-sdk\platform-tools>adb push recovery-thunderc-v-1.2.0-GNM.img /system
/xbin
cannot stat 'recovery-thunderc-v-1.2.0-GNM.img': No such file or directory
Click to expand...
Click to collapse
Here the 'recovery-thunderc-v-1.2.0-GNM.img' file should be present inside the C:\android-sdk\platform-tools directory. Also check if the spelling is correct.
Curiousn00b said:
C:\android-sdk\platform-tools>adb remount
remount succeeded
C:\android-sdk\platform-tools>adb shell
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock5 /system
mount -o remount,rw -t yaffs2 /dev/block/mtdblock5 /system
# chmod 755 /system/bin/flash_image
chmod 755 /system/bin/flash_image
# mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.bak
mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.bak
mv: can't rename '/system/etc/install-recovery.sh': No such file or directory
Click to expand...
Click to collapse
This error came because there is no file called 'install-recovery.sh' inside /system/etc. This is fine since you are anyways not going to use that file.
Curiousn00b said:
# mount -o remount,ro -t yaffs2 /dev/block/mtdblock5 /system
mount -o remount,ro -t yaffs2 /dev/block/mtdblock5 /system
# flash_image recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
flash_image recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
failed with error: -1
error reading /system/xbin/recovery-thunderc-v-1.2.0-GNM.img header# flash_image
recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
flash_image recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
failed with error: -1
error reading /system/xbin/recovery-thunderc-v-1.2.0-GNM.img header# /system/xbi
n/flash_image recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
/system/xbin/flash_image recovery /system/xbin/recovery-thunderc-v-1.2.0-GNM.img
/system/xbin/flash_image: permission denied
#
Click to expand...
Click to collapse
This part I am not that clear but it might be that the recovery 'recovery-thunderc-v-1.2.0-GNM.img' is corrupt or may be 'flash_image' is corrupt. You can also check for the amount of free memory by typing in 'df' and 'free' respectively. df would give you phone memory stats and free would give you RAM stats. Verify if anything is too low.
For the last permission denied error do a 'ls -l' at /system/xbin and check for the permissions.
I will look around to see if I can get some clues till then, lets wait for someone who can help you better.
[ADVICE: Since you are playing around with system binaries make sure you take a backup of /system/bin atleast.]
developer++ said:
I have made inline comments. Just take note of it.
Here the 'recovery-thunderc-v-1.2.0-GNM.img' file should be present inside the C:\android-sdk\platform-tools directory. Also check if the spelling is correct.
This error came because there is no file called 'install-recovery.sh' inside /system/etc. This is fine since you are anyways not going to use that file.
This part I am not that clear but it might be that the recovery 'recovery-thunderc-v-1.2.0-GNM.img' is corrupt or may be 'flash_image' is corrupt. You can also check for the amount of free memory by typing in 'df' and 'free' respectively. df would give you phone memory stats and free would give you RAM stats. Verify if anything is too low.
For the last permission denied error do a 'ls -l' at /system/xbin and check for the permissions.
I will look around to see if I can get some clues till then, lets wait for someone who can help you better.
[ADVICE: Since you are playing around with system binaries make sure you take a backup of /system/bin atleast.]
Click to expand...
Click to collapse
I tried again about 8 hours ago. I got through everything with no error, but when I got to recovery, it was still the old one. I'll try again once I get home.
Sent from my LG-VM670 using Tapatalk.
Other option (if your phone is rooted)
Install RomManager and install CWM or alternative.
If you're not rooted you need to do that first.
After that you can flash any recovery you want and you don't need to mess with adb
You can try to flash a recovery via LGMDP. I've flashed CWM 4.0 by this way.
_Arjen_ said:
Other option (if your phone is rooted)
Install RomManager and install CWM or alternative.
If you're not rooted you need to do that first.
After that you can flash any recovery you want and you don't need to mess with adb
Click to expand...
Click to collapse
Rom manager bricks the Optimus.
Dan_Jacques said:
You can try to flash a recovery via LGMDP. I've flashed CWM 4.0 by this way.
Click to expand...
Click to collapse
Sent from my LG-VM670 using Tapatalk
I got it flashed, thanks to Jerryscript.
Sent from my LG-VM670 using Tapatalk
Curiousn00b said:
Rom manager bricks the Optimus.
Sent from my LG-VM670 using Tapatalk
Click to expand...
Click to collapse
well most time i did it via rom manger and all time it was a sucess ,still lgmdp is good option but rom manger does it quiet easily just make sure u ahve a good internet connection so that its not disrupted when downloading better connected via wifi orelse better to go wth lgmdp method
Curiousn00b said:
I got it flashed, thanks to Jerryscript.
Sent from my LG-VM670 using Tapatalk
Click to expand...
Click to collapse
You can share the solution and provide a link so that in the future if someone has the same problem he can visit this thread and get things sorted out.
Edit the title of the thread to SOLVED
developer++ said:
You can share the solution and provide a link so that in the future if someone has the same problem he can visit this thread and get things sorted out.
Edit the title of the thread to SOLVED
Click to expand...
Click to collapse
I never found out how to change the thread name.
And ill edit the post tomorrow. I also have another question.
Sent from my LG-VM670 using Tapatalk
Can someone with a sd card, and adb, test this out? I don't want to test it out, cause without a sd card mounter, if it doesn't work, I'm screwed. If it doesn't work, I'm sure you have a nandroid on your sd card, hopefully. Please and thank you.
http://www.addictivetips.com/mobile/how-to-install-a-rom-to-an-android-phone-device-without-sd-card/
Sent from my LG-VM670 using Tapatalk
Hi guys!
I created this thread mainly because many useful things can be done in Terminal emulator. I will show you some simple commands which are useful.
Very useful if you don't have Root explorer when you need it.
Make sure you take a Nandroid backup before you try out just in case you can restore when you do something wrong!
You can get terminal Emulator from here: https://play.google.com/store/apps/details?id=jackpal.androidterm&hl=en
Note: Most commands need root. So type su and press enter and grant superuser permissions to Terminal Emulator!
First type this command before using any of the commands below just in case(needs root)
Code:
su
Some useful commands:
Turning device off (Turns your device off very fast!! ):
Code:
poweroff
Rebooting:
Code:
reboot
Rebooting to Recovery
Code:
reboot recovery
Rebooting to download mode:
Code:
reboot download
Forcing Most Apps to install to SDcard(Root needed with Terminal Emulator, no need root with ADB):
Code:
pm setInstallLocation 2
Alternatively, you can type 0 at the end instead of 2 for Auto location install mode or 1 for Internal memory install mode
To check what the current install location is:
Code:
pm getInstallLocation
Mounting R/W in system(Use with caution)
Code:
mount -o rw,remount -t /system
If above one doesnt work, try this.
Code:
mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
Unmounting R/W in system.
Code:
mount -o ro,remount -t /system
If above code doesn't work, try this
Code:
mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
Moving files from sdcard to system (Use after mounting R/W):
Code:
busybox cp /sdcard/<path> /system/<path>
Example: busybox cp /sdcard/demo/framework-res.apk /system/framework/
Changing file permissions to rw-r--r-- (Use after mounting R/W):
Code:
chmod 644 <path>
Example 1: chmod 644 /system/app/mms.apk
Example 2: chmod 644 /system/app/*.apk (This command changes the file permission of all apps in the folder to rw-r--r--)
Changing the current directory:
Code:
cd <path>
Example: cd /sdcard
Listing all the files and folders under the current directory:
Code:
ls
If you want to view all the files and folders in your sdcard, type:
cd /sdcard
ls
Making a new folder:
Code:
mkdir <path>
Example: mkdir /sdcard/newfolder
Removing files (For System files, Use after mounting R/W)
Code:
rm <path>
Example: rm /system/app/demoapp.apk
Removing Folders:
Code:
rmdir <path>
Get info of your build.prop values
Code:
getprop
That's all for now. I will add a few more later!
If you have any more new commands or if I have given an improper command, feel free to post it in the thread
Thanks for reading.
Have you any idea on why if I were to enter pm set-install-location 2(SD card), the next line would be "Killed"?
UserU said:
Have you any idea on why if I were to enter pm set-install-location 2(SD card), the next line would be "Killed"?
Click to expand...
Click to collapse
I don't understand your question...
Anyways...Thanks for reminding me of that command!
system.img said:
I don't understand your question...
Anyways...Thanks for reminding me of that command!
Click to expand...
Click to collapse
No problem. This is the output from the Terminal Emulator. The bold command changes the default install dir to the SD card:
u0 [email protected]:/ $ pm set-install-location 2
Killed
137|u0 [email protected]:/ $
Click to expand...
Click to collapse
UserU said:
No problem. This is the output from the Terminal Emulator. The bold command changes the default install dir to the SD card:
Click to expand...
Click to collapse
I never got that problem on adb.
Let me see....
This:
mount -o remount rw system
Is much easier than the previous one to mount readwrite.
Sent from my GT-P7300 using xda app-developers app
panpjp said:
This:
mount -o remount rw system
Is much easier than the previous one to mount readwrite.
Sent from my GT-P7300 using xda app-developers app
Click to expand...
Click to collapse
Isnt it /system?
ok...will add to op.
Thanks.
system.img said:
Isnt it /system?
ok...will add to op.
Thanks.
Click to expand...
Click to collapse
Not necessary for it to be /system
Sent from my Desire using xda app-developers app
panpjp said:
Not necessary for it to be /system
Sent from my Desire using xda app-developers app
Click to expand...
Click to collapse
Ok....
system.img said:
I never got that problem on adb.
Let me see....
Click to expand...
Click to collapse
Here's a thread which shed some light on the similar issue.
http://forum.xda-developers.com/showthread.php?t=1495423
UserU said:
Here's a thread which shed some light on the similar issue.
http://forum.xda-developers.com/showthread.php?t=1495423
Click to expand...
Click to collapse
I got it.
It needs root.
So type
su
pm set-install-location 2
Then you are done!
wow thanks !!
Bassesh said:
wow thanks !!
Click to expand...
Click to collapse
Welcome!
Useful
A question: once i tried to type
bootanimation
Click to expand...
Click to collapse
The boot animation started but..i couldn't stop it!! I could "use" the phone (i caught 4 or 5 screens) but the only thing i saw was the bootanimation.. i had to pull the battery off and restart my ace.. any solution??
Toni5830 said:
Useful
A question: once i tried to type
The boot animation started but..i couldn't stop it!! I could "use" the phone (i caught 4 or 5 screens) but the only thing i saw was the bootanimation.. i had to pull the battery off and restart my ace.. any solution??
Click to expand...
Click to collapse
That is the use of the bootanimation command. You can stop it either by pulling battery or closing terminal emulator!
But what I did to stop it was to rotate my phone to landscape and somehow close terminal emulator.
But in ADB it is easier to stop using exit command.
how to get info about /system memory and /data memory ?
rajxelton said:
how to get info about /system memory and /data memory ?
Click to expand...
Click to collapse
What info do you exactly want? Free Space, Partition Size or Used space?
system.img said:
What info do you exactly want? Free Space, Partition Size or Used space?
Click to expand...
Click to collapse
partition size. well can you tell me for all.
Anyone know a command to trigger media scanner?
Thanks for the commands. Quite new to all of this and these will help me understand things a little better
Hi all, i added some files into the system directory of my kindle fire hdx 7'.. when i restarted it is stuck in a boot loop on the animated Kindle Fire boot screen, i can ADB onto it, and i attempted to remove the files, but "ADB su" isn't working for me, and I'm unable to access the system directory over ADB... and i don't have custom recovery.
Any ideas on this one? is there a way of restoring the Kindle?
Thanks
osmorgan said:
Hi all, i added some files into the system directory of my kindle fire hdx 7'.. when i restarted it is stuck in a boot loop on the animated Kindle Fire boot screen, i can ADB onto it, and i attempted to remove the files, but "ADB su" isn't working for me, and I'm unable to access the system directory over ADB... and i don't have custom recovery.
Any ideas on this one? is there a way of restoring the Kindle?
Thanks
Click to expand...
Click to collapse
what you get on
Code:
adb shell
su
?
thanks for the reply. when i
adb shell
su
Click to expand...
Click to collapse
it returns to 1:[email protected] where it should show [email protected] any ideas?
osmorgan said:
thanks for the reply. when i
it returns to 1:[email protected] where it should show [email protected] any ideas?
Click to expand...
Click to collapse
after that use
Code:
mount -o rw,remount /system
if you wil get permission denied you need to do hard reset from recovery and try again
after that you could change files in /system
great, i will try this later.. any guides on doing a hard reset?? keeping in mind that i don't have custom recovery..
thanks again.
osmorgan said:
great, i will try this later.. any guides on doing a hard reset?? keeping in mind that i don't have custom recovery..
thanks again.
Click to expand...
Click to collapse
you could get into stock recovery by holding power+volume up
all of this suggesting that you are at 4.5.2 and rooted
for 3.2.X hard reset will delete su - file
You're a star. Thanks. I'll get onto this after work.
ONYXis said:
you could get into stock recovery by holding power+volume up
all of this suggesting that you are at 4.5.2 and rooted
for 3.2.X hard reset will delete su - file
Click to expand...
Click to collapse
No luck :/ was unable to mount, and hard reset via recovery still results in boot loop :/ any other ideas?
Could you post output?
and pls what is your firmware and root method?
Seems no way to recover(sorry
How do I provide the output? I was 4.5.2 and rooted with CVE
copy-paste output from cmd
like:
Code:
adb shell
su
....
ahh i see what you mean.. ive run s uagian after factory reset and its now giving me the root prompt! great! im just about to follow this guys steps
http://forum.xda-developers.com/showthread.php?t=2793253
thanks for your help.. i may be back.
any idea if this method works with stock recovery?
ONYXis said:
copy-paste output from cmd
like:
Code:
adb shell
su
....
Click to expand...
Click to collapse
nope.. that didnt work for me.. do you know how i can push a deb to reflash?
Pls post output to see that exactly doesn't work.
to use that manual you need to use 4.5.3 bin btw
I see, I was having permissions errors when pushing the file to the sdcard, I had mounted the data partition. I am unable to write anything as shell user, but fine as root. Any ideas?
Thanks
adb shell
[email protected]:/ $ su
[email protected]:/ # mount -o rw,remount /cache
[email protected]:/ # mkdir /cache/recovery
mkdir failed for /cache/recovery, File exists
[email protected]:/ # echo install /cache/kindleupdate.bin > /cache/recovery/openrecoveryscript
[email protected]:/ # chmod 0777 /cache/recovery/openrecoveryscript
[email protected]:/ # exit
[email protected]:/ $ exit
Mac-miniownloads $ adb push update-kindle-13.4.5.3_user_453011120.bin /cache/kindleupdate.bin
failed to copy 'update-kindle-13.4.5.3_user_453011120.bin' to '/cache/kindleupdate.bin': Permission denied
What do you think?
ONYXis said:
what you get on
Code:
adb shell
su
?
Click to expand...
Click to collapse
ONYXis said:
Pls post output to see that exactly doesn't work.
to use that manual you need to use 4.5.3 bin btw
Click to expand...
Click to collapse
osmorgan said:
Mac-miniownloads $ adb push update-kindle-13.4.5.3_user_453011120.bin /cache/kindleupdate.bin
failed to copy 'update-kindle-13.4.5.3_user_453011120.bin' to '/cache/kindleupdate.bin': Permission denied
What do you think?
Click to expand...
Click to collapse
You cant do this at that way
you need :
Code:
adb push update-kindle-13.4.5.3_user_453011120.bin /sdcard/update.zip
adb shell
su
mount -o remount,rw /cache
cd /sdcard
cp update.zip /cache
chmod 777 /cache
chmod 777 /cache/recovery
cd /cache/recovery
echo "--update_package=/cache/update.zip" > command
exit
exit
adb reboot recovery
thank you but i still get permissions issues -
failed to copy 'update-kindle-13.4.5.3_user_453011120.bin' to '/sdcard/update.zip': Permission denied
ONYXis said:
You cant do this at that way
you need :
Code:
adb push update-kindle-13.4.5.3_user_453011120.bin /sdcard/update.zip
adb shell
su
mount -o remount,rw /cache
cd /sdcard
cp update.zip /cache
chmod 777 /cache
chmod 777 /cache/recovery
cd /cache/recovery
echo "--update_package=/cache/update.zip" > command
exit
exit
adb reboot recovery
Click to expand...
Click to collapse
osmorgan said:
thank you but i still get permissions issues -
failed to copy 'update-kindle-13.4.5.3_user_453011120.bin' to '/sdcard/update.zip': Permission denied
Click to expand...
Click to collapse
Hmm....Strange. Are you see Fire as mtp device on you Pc (for Mac you need https://www.android.com/filetransfer/)?
If "yes" - try to copy update.zip manual into Fire's internal storage.
Hi, does anyone know how to delete a file on root with terminal, as rm -r returns screenshotted error.
kriki200 said:
Hi, does anyone know how to delete a file on root with terminal, as rm -r returns screenshotted error.
Click to expand...
Click to collapse
Did you execute this command as root ? If not enter "su" then enter your command. (Make sure you hit "Allow" when the prompt for you to allow root accès to the shell appears)
And maybe it sounds stupid but try chmod commands if your command doesn't work.
I'm not an expert with android terminal so if the problem is persistent you can try this with a root explorer.
Hope all of this helped
Have a good day
kriki200 said:
Hi, does anyone know how to delete a file on root with terminal, as rm -r returns screenshotted error.
Click to expand...
Click to collapse
The partitition you want to deal with must be mounted as READ-WRITE before.
Raiz said:
Did you execute this command as root ? If not enter "su" then enter your command. (Make sure you hit "Allow" when the prompt for you to allow root accès to the shell appears)
And maybe it sounds stupid but try chmod commands if your command doesn't work.
I'm not an expert with android terminal so if the problem is persistent you can try this with a root explorer.
Hope all of this helped
Have a good day
Click to expand...
Click to collapse
I did, kinda don't want to change permissions... same.
jwoegerbauer said:
The partitition you want to deal with must be mounted as READ-WRITE before.
Click to expand...
Click to collapse
How do I do and undo that, will it change any file permissions?
Example:
Code:
su
cd /
mount -o rw,remount -t auto /system
jwoegerbauer said:
Example:
Click to expand...
Click to collapse
Thank you, it worked, do you know how to undo it, the below command deosn't seem to work and do you know what the "auto" is for in the command?
Code:
mount -o ro,remount -t auto /system