This really really pi##es me off, as where I live I get 1x data, & usually use my home wireless (wifi).
Recieved the pro, and activated it. It seems disabled by being activated by alltel. I even stumped the blackberry adept person at the local store enough that they switched out the phone, I walked to next door (motel) used the free wireless (to prove the wireless would even function) then let him activate it and headed home (30+ miles into the wilderness). got home and again I cant get Crap wifi to work.
Home is wireless b, it connects, can be seen on the 'simple' 2 wire wireless appliance but the PRO, will not see or try to send data through it. turned off security and everything on the wireless for testing. I can check, but I know the pass for the motel, and I could try again, but am definitely sure that this AINT the issue--> again the phone wouldnt connect at the motel (least not the pre exchanged one) with me or the rep at Altel either, while it was activated and on alltel.
who to call? Any help out there?
my 6800 will still wifi, at anyplace there is a signal and that I know the passcodes or is open.
yes I asked this, at alltel-howard forums, but would think you guys here know more (on second thought, when I remembered about all the stuff you do here, I know I probably should've posted here 1st, but Im kinda mad at the moment!)
Pretty adept at computers, I do IS as my real job, anything I can do to help trouble shoot? yeah the 6800 has been flashed & I even noobed around with cooking a few time. appreciate any help you guys
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
goonygugle said:
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
Click to expand...
Click to collapse
goony,
Is it an Alltel? are you positive that wifi is working, not the "data" connection with alltel towers (cell call)? My proof is that if I goto my basment, I have no cell service so not any data connction, ONLY WIFI (that is where my wireless router is. that is when I found out the 1st time. Everything else looks right, on the phone it says it is connected, on the router I can see it on the connected devices list.
I have my issue that I believe, that it is some setting that Alltel is setting... like I said the phone would connect via wifi until the phone activated. When I activated (full unlimited data package is on this phone) the phone fully rebooted on its own, 3 times as if getting updated via data plan. Im not talking about the 1st time turn on customizations, those were done before I tested the wifi at the motel lobby... For instance, the volume control buttons - the display app were obviously modified, I am not positive what else was.
I'd LOVE to try custom rom, if I wasnt right in the period of time I can get my money back, or not. after that I will...
yes they are alltel, and to test the wifi i just connected it to my router and then turned of my alltel data and it stayed connected so i am positive the wifi works. you can still use a custom rom under your return period, if you want to return just relock it.
I wanted to double check myself sting to make sure i was realy getting wifi, so i connected and went to speedtest.net and did a speed test and sure enough it showed my isp as roadrunner(my home provider). Have you had this problem with multiple phones? are you checking the internet option when it connects? and do you have it diconnected from the pc? my wifi wont work on my diamond hooked to a pc.
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Sweeny Russ said:
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Click to expand...
Click to collapse
Hey thanks!
But, it is the Stock shipped rom, I have my HTC 6800 right next to this one, connected and surfing the web, both show up when in the home WIFI router config as connected, yet the pro sends NO DATA to ie or opera, (cant locate any webpages) or any app that uses internet/data.Unless there is something I need to do with PRO that I never had to do with the 6800 (mogul) that I just flashed back to stock shipped rom, ready to sell on ebay...
what I dont know is, well, most of the people wifi to tether a laptop or something, I dont! Sure that will be neat in the future, but RIGHT NOW, Just I use WIFI when I am at home and dont even have signal or evdo near me... (remote locations that I live, the tower coverage sucks out here in ks...) Got to fix this soon, or this Beyotch is going back to alltel.
Another thing, this bad boy pulled this crap, as soon as alltel activated the device (so I could use it as my phone!) when it was NOT activated, the wifi worked (proven at the motel next door to the Alltel store I exchanged this phone). BTW, I was able to test it on the 1st phone shipped to me, while it was activated, it pulled the same thing, when he unactivated the phone, we could almost pickup the wifi from the motel next door (distance was the only issue I think now looking back) but seemed like a chip problem.
Where I got screwed was we believed the wifi to be bad on the 1st phone. So he got out a new phone, and before we activated it, I went and tested the wifi, it worked on the 2nd phone. I thought wall was fine, it worked. then I had him activate it, assuming that proved I will be able to use the wifi. So I leave the store thinking OK wifi works. I get home, and again unable to use my home networking wifi to open web or apps. unacceptable. Yet the 6800 does and still works flawlessly (as long as you slide the wifi sider on side to on {inside joke}).
follw me better now?
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Sweeny Russ said:
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Click to expand...
Click to collapse
Sweeny, Im in the houshold router (made by 2wire) I can see it (the Pro as well as the 6800) each get an ip. (I work In IT, so I know what you are talking about in ip conflicts, all that.) I have even set the router to manually setup IPs now, then set the ip inside the Pro, as well as the default gateway, dns all that.) I'm telling ya, it is more like it doesnt know the DNS or the gateway (just like I disable internet surfing on the computers at work that I still must use networking)
I copied the DNS and everything from a working laptop (ipconfig -all) on a wireless laptop today, and still as if it was disabled.
This weekend i will test the dang thing tethering with my notebook i'll bring home from work (use the pro as the internet access). if it wont tether either, then I think allHell is doing something. Again if the device is DE-Activated I will wifi... {I'll bet you $$}. I might call alltel, tomarrow night, and try that. I'll have them inactivate it and if it suddenly works, then the question is, what do I do with alltel? they dont have the right to disable hotspot usage do they?
I feel I feel the presence of VERIZON already in Alltel, Luke is turning to the dark side. NOOOOOOOOOOOOOOOOOOOOOOOOO!
You all thought I was off my crock...
http://www.htcwiki.com/thread/2073117/Touch+Pro+WiFi?t=anon lots of folks posting same problems it looks like.
Need that group of people who can create a kitchen, and hcak tomtoms, to help us with this PLEASE!
No I don't, think you're off your crock I just know how frustrating problems like this can be. Here is what I suggest you do. And if this doesn't work exchange the phone or try a different router. I know what you're thinking....not the router. Truth is might be. Its just like wireless adapters in wii's and ps3's they simply will not work with a handfull of routers even though not clearly documented.
Anyway, change router to static Ip's, safer anyway.
Specifiy gateway, primary and secondary dns, and limit your ip's within 100 available obtainables. Use a 64 bit wep encryption. Change the channel of your router's broadcast to 1 or 11. Use only simple gateway ip range, not pure server. If you need me to provide you with example settings then pm me because I do not want to broadcast them via forum
Good luck.
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
I have had the alltel touch pro since the second they hit the store. I have used 3 of them since and they all work perfectly on wifi. I primarily use wifi and use diamond tweak to activate the wifi standby so wifi stays connected in standby like data does by default and use modaco nodata to disable data as I live in a house that gets a very lowsignal from the tower and eats my battery superfast if I use data. I have a router in the house and one in my office detached from my home and when I had my mogul it often would not switch between routers successfully requiring me to manually connect more often than not. All the Touch Pros connect superfast and switch automatically. I am running mightyrom 4.12 and telus radio which is light years better than stock with signal, speed and batterylife, but even when I was on stock for about 3 months there were absolutely no wifi issues.
ACoolGuy said:
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
Click to expand...
Click to collapse
Not sure which of us you are asking this queston of...
Thanks, for the help so far...
I was having the same issue (Alltel and all).
I found this post in the MS forums:
http://social.microsoft.com/Forums/en-US/windowsmobile/thread/561f18a8-5f64-4359-957e-adb003229f1d
Essentially, it says to "Navigate to START/SETTINGS/Connections Tab/Connections icon/Advanced Tab
Press Select Networks Button
At the top it says "Programs that automatically connect to the Internet should connect using:"
You want to press on the drop down and choose My Work Network"
You need to tell the system that the Work Network connects to the internet as well. While this doesn't seem like the ideal solution (there should be a faster way to switch it, or it should do it automatically depending on location), it did work for me. I'm sure there's a much more sleek solution out there, though.
Btw... I hope I'm posting this correctly. I'm more a reader than a poster.
Ooop... one more thing. Its non-sleekatude rests with the fact that when you want to switch between wifi and your data plan, you have to go through the whole process, and switch the active network from My Work Network to Alltell Wireless. This is where I was hoping for a better solution. As I say, it does work, but it seems like it should involve less hassle.
Might add this to the WIKI, I dunno but there could be a few more thousand users out there on ATT or SWB using the modem/routers that they shipped when you got DSL more than a year ago...
Everyone that has the older 2 wire brand, wifi modem/router that came with SBC (now ATT). Wierd I know. But Mine has just been replaced by the newer version of that modem/router. and I will be dammed, it works. but the phone wont work with the older ones. Mine was the 2WIRE 1000hw model. they are shipping new models, and finally the phone will work with the wifi on that new router.
Thought it might be nice to know...
alltel model uses wifi just fine
My TP from alltel works just fine with wi-fi all i ever do is turn it on and then select which connection i want to make ...really quite nice...maybe you need to exchange yours...
On further testing of my own setup, I'm thinking my issue was the router. I had done several fixes all at once, and cited the wrong fix as the working one. I happened to reset my router at the same time I did the above suggested fix.
I thought it had to be the device, as my HTC Apache never had an issue with the router, but after resetting the router, and going back to the original settings on the TP, I'm having no problems connecting to the network. I wish I could pinpoint the exact conflict between the two, but now that I have it working, I'm not messing with it.
My suggestion is to back up your router settings, reset the router, and see what happens. Or test your wifi on someone else's network.
Isolating a network conflict can be one of the least fun things to do, but from everything I've seen here and in other forums (and my experience with it) I'm going to say that's the issue, and not the TP alone.
I don't think it likes your router being wireless B, you should try it on a wireless G router before Ebaying it.
This has frustrated me to no end. Does anybody know if there is an app that will switch from HSPDA to 2g? Preferably one I can set to a schedule? The WiFi calling app is the only one that seems to do this flawlessly, however it requires a WiFi connection.
When I am at work I do not use my phone for anything except phone calls and my calendar, so I do not have any need for 4 or even 3g coverage... And my phone just drains battery trying to establish these connections.
I've tried using APNdroid but it just force closes my phone process.
Any help on this matter would be greatly appreciated. I'm running elite sense 2.6 if that matters at all.
Sent from my HTC Glacier using XDA App
+1
It would be great if there is some app to schedule 2g/3g.
Sent from my GT-I9000 using XDA App
Why not just do it manually? If not then maybe Locale? It's $10 but it may do what you are looking for.
Switchpro or extended controls has the option idk about a schedule though.
I use a Juicedefender/tasker combo to Control the 3g. I had to ROOT and flash CM to get it do it, but its made my life easier since I never remembered to turn 3g off when I went to work.
*EDIT: though it should be noted that the AOSP Helper that Juicedefender uses to toggle 3g doesn't seem to work on Cm7.03
Hi williecat316,
I just have installed Tasker and I would like to do the same kind of combo as you did with Juice Defender and Tasker. E.g. when I unlock the phone, stay in 2g, but use Juice Defender to start 3g if I am away from any known wifi spot AND if I launch lets say the browser or any connected app. Could you give more details about the way you configured Tasker on your phone?
Thanks
P.S. the 3G/2g swithing through Juice Defender works perfectly on my phone (via AOSP Helper of course) but I'd like to fine tune the way it switches between 2g and 3g thanks to Tasker.
I have problems with 2g... All incoming calls go to voice mail....
Somebody can help me?
macmalon said:
Hi williecat316,
I just have installed Tasker and I would like to do the same kind of combo as you did with Juice Defender and Tasker. E.g. when I unlock the phone, stay in 2g, but use Juice Defender to start 3g if I am away from any known wifi spot AND if I launch lets say the browser or any connected app. Could you give more details about the way you configured Tasker on your phone?
Thanks
P.S. the 3G/2g swithing through Juice Defender works perfectly on my phone (via AOSP Helper of course) but I'd like to fine tune the way it switches between 2g and 3g thanks to Tasker.
Click to expand...
Click to collapse
Seriously, did you read the date on the last post.
I see a lot of people asking my same question but I haven't found a good answer yet.
I'm running Fresh LTE. Is there a method or an app that will prevent the phone from connecting to open WiFi networks unless I've connected to them before? I hate losing whatever I'm streaming every time I drive near a McDonalds or Starbucks.
Thanks
Turn WiFi off maybe?
There's juice defender. U can customize the hot spots u want to connect to by training your phone to connect when you're at that location. The other spots won't/shouldn't connect.
Another route is tasker.
Both cost money as u need the ultimate version of juice defender.
I just turn off my WiFi when I'm out. The routers @ restaurants often have the same name. McDonald's is horrible for it in my town.
you could also just erase the ap from your phone
om4 said:
you could also just erase the ap from your phone
Click to expand...
Click to collapse
Yeah, now I realize what's happening is that every Starbucks, McDonalds, and even Home Depot around here shows an SSID of attwifi. So once I connected to one Starbucks location, it thinks it has permission to connect to any other location also. I told it to forget the one attwifi I had in the list of networks, so I think that might take care of my problem.
Hey,
Does anyone know of an app what can help me automatically switch Wi-Fi based in hirsignal strengths, I have 3 connections in the house all of them have the same SSID but they're all in different places around the house basically I am looking for an app to reconnect Wi-Fi if there is an available connectable SSID 20% stronger signal.
All of the apps I've found only support different SSID's which is rather annoying.
You can give tasker a try, im not sure if it will allow you to do exactly what you ask. Surely it will be much easier if all the name of the 3 wifi were different, at that point I think android should automatically switch to the most powerful one.
Sent from my GT-N8013 using Tapatalk HD
DBBGBA said:
You can give tasker a try, im not sure if it will allow you to do exactly what you ask. Surely it will be much easier if all the name of the 3 wifi were different, at that point I think android should automatically switch to the most powerful one.
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
Hey,
I realised tht if they had different names android would automatically switch but there are like 15 wireless devices in the house and setting then all up to 3 wireless connections is a hassle especially with setting up static IP's and proxy settings for adblock plus.
Also when we have friends and family over they're more than welcome to use the Wi-Fi so it makes more hassle.
I'll have a look into tasker, thanks for your reply.
Update:
I'm so not understanding this Tasker, I can't work out how to do this... I've done a few other things but seriously can't get my head around this exact need.
My Internet speed is roughly 50 down and 5 up. I use a Netgear modem/router (this was the router that worked correctly with all of my demands). I have an iMac that will get the full 50 download speed via wifi. My iPad gets around 30 (not the full 50 but satisfactory)... but my Note 3 is around 1Mbps. Maybe sometimes it'll spike up in speed for a few moments... But it's so inconsistent. I tried using different channels on the router.... No improvement. (the upload speed is fine though. It'll usually be the full 5mbps)
Any ideas on what's going on? Any settings on the router I can try to help improve this? (stock note 3).
Any help is appreciated. Thanks
Blipstein said:
My Internet speed is roughly 50 down and 5 up. I use a Netgear modem/router (this was the router that worked correctly with all of my demands). I have an iMac that will get the full 50 download speed via wifi. My iPad gets around 30 (not the full 50 but satisfactory)... but my Note 3 is around 1Mbps. Maybe sometimes it'll spike up in speed for a few moments... But it's so inconsistent. I tried using different channels on the router.... No improvement. (the upload speed is fine though. It'll usually be the full 5mbps)
Any ideas on what's going on? Any settings on the router I can try to help improve this? (stock note 3).
Any help is appreciated. Thanks
Click to expand...
Click to collapse
Digital Trends has an article that has some tips on this issue:
Glitch: Wi-Fi issues
Some Note 3 owners are having trouble connecting to Wi-Fi networks, finding that the Wi-Fi is very slow, or that the device keeps dropping the connection. There are a ton of potential reasons for this and consequently there are a ton of potential fixes. Here’s what you can try:
Workaround:
Some people with stability issues have been able to get solid Wi-Fi connections simply by making sure that mobile data is switched off. Just drag down the notification shade and toggle Mobile data off.
Potential solutions:
Go to Settings > Wi-Fi and tap Menu > Advanced and then uncheck Auto network switch. That seems to have helped some people.
Try turning off the Note 3 and your router for a few minutes and then turn them both back on again.
Go to Settings > Wi-Fi and long press on the problem connection, then tell the device to forget it and set the connection up again from scratch.
Try out the free Wi-fi Analyzer app and see if crowded channels could be the issue. If so then change the channel on your router.
Make sure that your router firmware is up to date and check settings like MAC filtering.
If you’re having stability issues then you might try disabling the apps Wi-Fi Direct and Wi-Fi Direct Share via Settings > Applications manager on the All tab.
Read more: http://www.digitaltrends.com/mobile/galaxy-note-3-problems/#ixzz34AdTmdKl
Follow us: @digitaltrends on Twitter | digitaltrendsftw on Facebook
Click to expand...
Click to collapse
You might also try a different modem, which are you using? (NAB, NC5 or even MJ4)
jdelano said:
Digital Trends has an article that has some tips on this issue:
You might also try a different modem, which are you using? (NAB, NC5 or even MJ4)
Click to expand...
Click to collapse
Thank you for the reply. Unfortunately nothing seemed to of helped.
I do not know how to tell which type of router I have. I can tell you it took many routers to find the right one (NetGear C3700). I went through a bunch of Time Warner crap and several from Best Buy......even Motorola's flagship modem/router. It needed to do the following:
Provide open NAT type for Xbox live
Allow my Android device to recognize the Xbox One as a device on my network (pics, vids & music through the console)
Allow Android Youtube app to communicate with the Xbox One Youtube app.
Allow proper connection to my iMac via Wifi (One of Time Warner routers would not work with my iMac)
My BT and Wifi havent worked the same since the KitKat update - Thanks again
Blipstein said:
Thank you for the reply. Unfortunately nothing seemed to of helped.
I do not know how to tell which type of router I have. I can tell you it took many routers to find the right one (NetGear C3700). I went through a bunch of Time Warner crap and several from Best Buy......even Motorola's flagship modem/router. It needed to do the following:
Provide open NAT type for Xbox live
Allow my Android device to recognize the Xbox One as a device on my network (pics, vids & music through the console)
Allow Android Youtube app to communicate with the Xbox One Youtube app.
Allow proper connection to my iMac via Wifi (One of Time Warner routers would not work with my iMac)
My BT and Wifi havent worked the same since the KitKat update - Thanks again
Click to expand...
Click to collapse
Man that sucks, I had serious issues with 4.3. since KK I've been rocks solid with WiFi,
You might try to old factory reset (which sucks I know) just backup first so if there is no change you can restore easy enough.
What ROM are you running? Stock?
Set your wireless channel away from everyone elses. There is a setting where you can just set it to just 802.11N save it. Try setting your wifi port to static for your device. Check your wifi settings on your device. Make sure your using the same channel on your device as for the router.
Sent from my SM-G900P using XDA Premium 4 mobile app
I've already tried a factory reset since the KK update (for Bluetooth issues). No help.
The phone is stock.
I've tried changing around the channels a little bit with no success so far. How can I change the channel on the device? How do I set the port to static for my device?
Thanks