Related
Alright so i flashed this
http://forum.xda-developers.com/showthread.php?t=1418721
on my evo 3D with hboot 1.5 s-on using adb commands:
adb reboot bootloader
then
fastboot boot recovery.img
then i flashed the rom, now the problem is that when i plug in my phone to my computer it trys to install mtp usb divice but it doesnt find any drivers for it. my adb commands no longer work it always gives me
error: device not found
fastboot commands do the same.
i have tryed to reinstall htc sync still no good. and i have tryed to install another kernal and rom, no good.
i have tryed flashimg gui to flash a kernel then flash another rom, no good.
if anyone could tell me how to use fastboot again that would be great i need to flash a kernel trough fastboot, the recovery
Just reboot it in recovery and then use adb. That's what I do if I feel like flashing a new version of an ics rom.
Problem your encountering is the lack of drivers from HTC for ICS I believe. None the less, the method I stated above will work.
Sent from my PG86100 using XDA App
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Just manually boot into bootloader then use fastboot commands to get into recovery. Didn't look which Rom you flashed but 2 if the Ics rims native USB doesn't work.
Sent from my PG8610000 using xda premium
I fought for days with my fastboot, and drove several folks a bit crazy with my incessant problems. What was eventually figured out to be my problem was that I had easytether running in the background, and it was messing with the fastboot/adb connection. Make sure you dont have anything extra running that might be trying to access your usb ports or your phone while trying to use fastboot. I learned the hard way. Also you might want to try uninstalling htcsync, and installing just the htc drivers, and turning off any antivirus you have running as well as any firewall. hope maybe this helps!
I tried [ROM][AOSP] Evervolv-ICS 2.1.0p6 [IML74K] 01/06/2011 and it was not booting on my end, I have 1.5 Unlocked and the only ones that work on my end are
1. http://forum.xda-developers.com/showthread.php?t=1411185
And
2. http://forum.xda-developers.com/showthread.php?t=1411461
I went to OTA update MeanRom from 3.1 to 3.2 and after the rom install and reboot my phone kept rebooting, I waited for about 45 minutes just make sure it wasnt going to take.
I then used fastboot to install my last recovery however, the recovery install froze at installing /system for over an hour. I had no choice but to try and reboot as none of the buttons worked. I am now stuck at the HTC screen and can not get into fastboot or phone.
I've tried searching for a solution for a day and still have had no luck. Cant run RUU as it has a USB error which I expected as the phone never boots.
Any help is greatly appreciated.
I am/was on latest radio/firmware/s-off.
Thanks for looking!
evoman said:
I went to OTA update MeanRom from 3.1 to 3.2 and after the rom install and reboot my phone kept rebooting, I waited for about 45 minutes just make sure it wasnt going to take.
I then used fastboot to install my last recovery however, the recovery install froze at installing /system for over an hour. I had no choice but to try and reboot as none of the buttons worked. I am now stuck at the HTC screen and can not get into fastboot or phone.
I've tried searching for a solution for a day and still have had no luck. Cant run RUU as it has a USB error which I expected as the phone never boots.
Any help is greatly appreciated.
I am/was on latest radio/firmware/s-off.
Thanks for looking!
Click to expand...
Click to collapse
Have you tried getting into recovery from the boot loader and flashing a rom
Sent from my EVO using xda premium
evoman said:
I went to OTA update MeanRom from 3.1 to 3.2 and after the rom install and reboot my phone kept rebooting, I waited for about 45 minutes just make sure it wasnt going to take.
I then used fastboot to install my last recovery however, the recovery install froze at installing /system for over an hour. I had no choice but to try and reboot as none of the buttons worked. I am now stuck at the HTC screen and can not get into fastboot or phone.
I've tried searching for a solution for a day and still have had no luck. Cant run RUU as it has a USB error which I expected as the phone never boots.
Any help is greatly appreciated.
I am/was on latest radio/firmware/s-off.
Thanks for looking!
Click to expand...
Click to collapse
I'm confused...You were flashing a recovery from fastboot? Or were you doing a nandroid restore? You tried holding volume down + power to get into the bootloader right?
Sent from my EVO LTE
I can not get past the first HTC screen. Holding power and volume down wont work as it wont get past the first screen. I was using a Nandriod.
Thank you.
evoman said:
I can not get past the first HTC screen. Holding power and volume down wont work as it wont get past the first screen. I was using a Nandriod.
Thank you.
Click to expand...
Click to collapse
Did you do the restore from recovery (TWRP) or did you use fastboot? I ask because fastboot isn't typically used to restore from a nandroid backup, so just trying to understand your description. Do you have adb on your pc?
Sent from my EVO LTE
premo15 said:
Did you do the restore from recovery (TWRP) or did you use fastboot? I ask because fastboot isn't typically used to restore from a nandroid backup, so just trying to understand your description. Do you have adb on your pc?
Sent from my EVO LTE
Click to expand...
Click to collapse
I apologize I really wasnt clear. I was using TWRP. I just uninstalled it a couple of weeks ago I will go grab it again right now.
evoman said:
I apologize I really wasnt clear. I was using TWRP. I just uninstalled it a couple of weeks ago I will go grab it again right now.
Click to expand...
Click to collapse
Gotcha...then this is very strange. Once you have adb installed, try plugging the phone into your pc, power it on and when it's at the HTC screen try the "adb reboot recovery" command and see if that gets you into TWRP. I've never tried using adb from that screen so not sure if the phone is capable of communicating at that point, but worth a shot...
Sent from my EVO LTE
Ok installed r20.0.3 of Andriod SDK. I installed Andriod SDK platform tools REV 14. Now what should I do?
premo15 said:
Gotcha...then this is very strange. Once you have adb installed, try plugging the phone into your pc, power it on and when it's at the HTC screen try the "adb reboot recovery" command and see if that gets you into TWRP. I've never tried using adb from that screen so not sure if the phone is capable of communicating at that point, but worth a shot...
Sent from my EVO LTE
Click to expand...
Click to collapse
Premo, I tried that but I get an error device not found. However, I do hear my laptop make the usb connecting noise when I plug in my phone.
Any other suggestions?
Thank you
evoman said:
Premo, I tried that but I get an error device not found. However, I do hear my laptop make the usb connecting noise when I plug in my phone.
Any other suggestions?
Thank you
Click to expand...
Click to collapse
That's what I was afraid of...the only other thing I can think of is to maybe try flashing a new boot image, but you may have the same problem you had with adb in not being able to communicate with the phone. What you would need to do is pull the boot.img file out of the MeanROM zip, put it somewhere on your PC, then with your phone plugged in open the command prompt and type:
Code:
fastboot flash boot <path_to_boot_img>boot.img
It's basically the same process as installing a new kernel on the new hboot version, which is outlined here:
http://forum.xda-developers.com/showthread.php?t=1794867
Typically you have to be in the bootloader for this, but it's worth a try from the HTC screen. I've been successful with the fastboot command when adb does not see the device, so may work in this case as well. If not, then I'm out of ideas. Since you can't get to the bootloader, you should be able to take it into sprint or best buy without them knowing you tampered with it. Just tell them you took the latest OTA and the battery died during the installation or something. Hopefully they will exchange it, but you run the risk of getting one with the new hboot and losing S-OFF Better than no phone at all though, I suppose...
Not too sure if u have a recovery installed but regardless you should be able to simulate a battery pull by holding power button for 10 seconds or until the captive button lights flash 12 times I think. When the phone powers down press and hold volume down only and you should boot into boot loader. From here you should have a better chance of using adb or fastboot or recovery if you have twrp installed. If you can get to boot loader you have options especially since your s-off.
Good luck man
Sent using my LTEVO
Ok I was able to get into bootloader and tried to flash MeanRom after wiping cache/dalvik/factory reset/system three times each with a new download of MeanRom and it said it flashed successfully. I rebooted and it keeps getting almost to setup then reboots. Should I try an RUU again? If so what version should I use?
Bootloader says:
Jewel PVT SHIP S-OFF RL
CID-SPSC_001
HBOOT-1.12.111
RADIO-1.05.11.0606
Thanks again!
evoman said:
Ok I was able to get into bootloader and tried to flash MeanRom after wiping cache/dalvik/factory reset/system three times each with a new download of MeanRom and it said it flashed successfully. I rebooted and it keeps getting almost to setup then reboots. Should I try an RUU again? If so what version should I use?
Thanks again!
Click to expand...
Click to collapse
That's good you can get into the bootloader, as previous poster said, you have a lot more options. I would save RUU as a last resort. See if you can flash a different ROM, like viper 4g or clean ROM. Or maybe an older version of mean ROM.
Sent from my EVO LTE
That's odd that after a full wipe mean ROM won't boot. Wasn't there issues with mean ROM if your recovery wasn't up to date. I would do a full wipe and try to restore a nandroid. Someone with more knowledge than me can defo help you . You can access bootloder, you have a recovery installed so you should be fine.
Sent using my LTEVO
are you on the latest version of TWRP? version 2.2.2, mean rom has had some issues with older versions...
bog3nator said:
are you on the latest version of TWRP? version 2.2.2, mean rom has had some issues with older versions...
Click to expand...
Click to collapse
No I wasnt so I just updated and will try again. Let you know soon. Thank you
Ok upgraded to the latest TWRP and tried MeanROM again. No go so now I will try CM10 to see if that works
Great news CM10 works and so does an old version of MeanROM guess I just cant run version 3.2 or 3.3. Thanks again for all of the help everyone! This place is the best.
Your phone must not like the new kernel.
Sent from my EVO using Tapatalk 2
thicklizard said:
Your phone must not like the new kernel.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I am not sure if that is all it is. I tried to install 3.3 and then flashed the stock kernel over it and still couldn't boot properly. Its ok it forced me to try CM10.
So I was trying to root/rom flash my wife's X+ to the Viper rom. I unlocked the bootloader from HTC, downloaded the all-in-one app, but it only had CWM on it, so I flashed CWM, pushed SU and installed SU with CWM, everything was fine. \
Loaded Viper rom on to internal memory, rebooted into CWM, installed Viper rom with full wipe. Phone rebooted, got Viper start up screen, booted to Viper lock screen, but when I unlock it, it shows a white screen with HTC on it, and wont let me get into anything. If I hold the home button, it says set up stopped responding, wait or close. I then reboot and all I get is a black screen with the battery, wrong time, and no signal at the top and then it resets it's self after about 2-3 mins. I cant get into the memory card or debugging before it reboots. What can I do to get the phone back functioning?
1. What method did you use to try to root? see above
2. Do have twrp or cwm installed? If so can you boot to recovery? CWM, yes
3. Can you boot to bootloader? Yes
4. What software version is phone on? 4.1.1
4. Does you pc recognize the phone when plugged in?
5. Does the phone boot at all? Yes
6. Can still get to fastboot? Yes
Do you flash boot.img?
HTC One X+ with Elegancia Rom Jelly Bean 4.1.1
rameriitoh said:
Do you flash boot.img?
HTC One X+ with Elegancia Rom Jelly Bean 4.1.1
Click to expand...
Click to collapse
yes, I pulled the one from the rom zip and flashed it
Mmm repeat the process flash the boot.img and flash the rom again, do you have a nandroid backup?
Sorry for my english :/
HTC One X+ with Elegancia Rom Jelly Bean 4.1.1
rameriitoh said:
Mmm repeat the process flash the boot.img and flash the rom again, do you have a nandroid backup?
Sorry for my english :/
HTC One X+ with Elegancia Rom Jelly Bean 4.1.1
Click to expand...
Click to collapse
i've tried, but i will try again when i get home from work tonight. and no, i didnt get a nandroid backup ...
Download other rom and try again
If you like flash the twrp 2.4, I had no problems with that
HTC One X+ with Elegancia Rom Jelly Bean 4.1.1
If you've updated the phone to the new firmware ( AT&T/Telus) the only roms you can flash are the one with new base.
@Turge posted two stock roms in the developer section.
http://forum.xda-developers.com/showthread.php?t=2235248&nocache=1
Sent from my HTC One X+ using Tapatalk 2
garmig said:
If you've updated the phone to the new firmware ( AT&T/Telus) the only roms you can flash are the one with new base.
@Turge posted two stock roms in the developer section.
http://forum.xda-developers.com/showthread.php?t=2235248&nocache=1
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
I've been "mentioned".. lol
Twiztidunreal said:
So I was trying to root/rom flash my wife's X+ to the Viper rom. I unlocked the bootloader from HTC, downloaded the all-in-one app, but it only had CWM on it, so I flashed CWM, pushed SU and installed SU with CWM, everything was fine. \
Loaded Viper rom on to internal memory, rebooted into CWM, installed Viper rom with full wipe. Phone rebooted, got Viper start up screen, booted to Viper lock screen, but when I unlock it, it shows a white screen with HTC on it, and wont let me get into anything. If I hold the home button, it says set up stopped responding, wait or close. I then reboot and all I get is a black screen with the battery, wrong time, and no signal at the top and then it resets it's self after about 2-3 mins. I cant get into the memory card or debugging before it reboots. What can I do to get the phone back functioning?
1. What method did you use to try to root? see above
2. Do have twrp or cwm installed? If so can you boot to recovery? CWM, yes
3. Can you boot to bootloader? Yes
4. What software version is phone on? 4.1.1
4. Does you pc recognize the phone when plugged in?
5. Does the phone boot at all? Yes
6. Can still get to fastboot? Yes
Click to expand...
Click to collapse
I assume you wiped data if you got the setup screen?
As @garmig said, if you updated the firmware and are on the latest HBOOT, you won't be able to flash ViperXL+ until I update it to the latest build. Did you take the OTA update?
Turge said:
I've been "mentioned".. lol
I assume you wiped data if you got the setup screen?
As @garmig said, if you updated the firmware and are on the latest HBOOT, you won't be able to flash ViperXL+ until I update it to the latest build. Did you take the OTA update?
Click to expand...
Click to collapse
yes, i wipped all data, cache, etc.
if that was the update that came out about a week or so ago, then yes i remember her saying something about an update from ATT.. How can I get another rom on there to flash if i cant get into ADB and debugging mode? ive tried the side load in CWM but i cant get it to connect, and the phone just sits there waiting.
I've always flashed galaxys and such, so im use to being able to remove the memory card and put what ever i needed on with a card reader. I just got my HTC One and now she wanted her OneX+ flashed for more options. Guess I didnt read close enough about the update.. and of course she is mad because she doesnt have a working phone at the moment, lol, GO ME!!!
Twiztidunreal said:
yes, i wipped all data, cache, etc.
if that was the update that came out about a week or so ago, then yes i remember her saying something about an update from ATT.. How can I get another rom on there to flash if i cant get into ADB and debugging mode? ive tried the side load in CWM but i cant get it to connect, and the phone just sits there waiting.
I've always flashed galaxys and such, so im use to being able to remove the memory card and put what ever i needed on with a card reader. I just got my HTC One and now she wanted her OneX+ flashed for more options. Guess I didnt read close enough about the update.. and of course she is mad because she doesnt have a working phone at the moment, lol, GO ME!!!
Click to expand...
Click to collapse
You can use the RUU from here keeping in mind that it will wipe your phones internal memory COMPLETELY!
or you could flash this rooted and deodexed version from here
Both are the new build 1.19.502.1
Twiztidunreal said:
yes, i wipped all data, cache, etc.
if that was the update that came out about a week or so ago, then yes i remember her saying something about an update from ATT.. How can I get another rom on there to flash if i cant get into ADB and debugging mode? ive tried the side load in CWM but i cant get it to connect, and the phone just sits there waiting.
I've always flashed galaxys and such, so im use to being able to remove the memory card and put what ever i needed on with a card reader. I just got my HTC One and now she wanted her OneX+ flashed for more options. Guess I didnt read close enough about the update.. and of course she is mad because she doesnt have a working phone at the moment, lol, GO ME!!!
Click to expand...
Click to collapse
First thing's first, what hboot version are you on? you can see that in the booloader screen. Mine is 1.32.0000 which is the previous version.
Anyways, ADB works in TWRP. I'm running 2.4.4.0 and I noticed it can take up to 30 seconds for it to start. You may want to start with that version: http://techerrata.com/browse/twrp2/evitareul
Once in TWRP, you can either use "adb push" or "adb sideload":
ADB Push:
Run "adb devices" until your serial # shows up
run "adb push c:\somefolder\rom.zip /sdcard/" to push the rom zip to your phone's sdcard. It can take up to 10 mins to transfer it this way. You can use one of these: http://forum.xda-developers.com/showthread.php?t=2235248
ADB Sideload:
While in TWRP, select Advanced then ADB Sideload
Type "adb sideload c:\somefolder\rom.zip"
Once flashed, reboot to bootloader and flash the boot.img then reboot your phone.
His wife is prob pissed lol I know mone would be
Sent from my HTC One X+ using XDA Premium HD app
TheJokah said:
You can use the RUU from here keeping in mind that it will wipe your phones internal memory COMPLETELY!
or you could flash this rooted and deodexed version from here
Both are the new build 1.19.502.1
Click to expand...
Click to collapse
so the first one i see is an .exe, so does that mean that is all i would need to wipe it? and the second one, how would i flash it, using which utility?
Twiztidunreal said:
so the first one i see is an .exe, so does that mean that is all i would need to wipe it? and the second one, how would i flash it, using which utility?
Click to expand...
Click to collapse
Yes, the first is an .exe and can be run from Windows. However, you may need to flash stock recovery( which can be found here ) first.
The second file can be flashed like any other rom as well as the boot.img
ac3kill said:
His wife is prob pissed lol I know mone would be
Sent from my HTC One X+ using XDA Premium HD app
Click to expand...
Click to collapse
you have no idea..... lol kinda glad im at work so i dont have to hear about it, but kinda wish i was home so i could fix it faster, lol
i should be home in about 3 or 4 hours though, and i will try a few things and let you guys know the status. I appreciate all the help so far, hope i can get it back up and running asap!
before going back to stock, i would flash a different rom mate. latest viper as a known issue where it leaves you stuck at that very point I'm sure while its stuck on the htc screen you should be able to connect it to your pc and drag a new rom across, if not flash TWRP 2.4.4.0 and "sideload" or "push" your rom. Trust me theres no need to go back to stock.
http://forum.xda-developers.com/showpost.php?p=40497069&postcount=1191
Turge said:
First thing's first, what hboot version are you on? you can see that in the booloader screen. Mine is 1.32.0000 which is the previous version.
Anyways, ADB works in TWRP. I'm running 2.4.4.0 and I noticed it can take up to 30 seconds for it to start. You may want to start with that version: http://techerrata.com/browse/twrp2/evitareul
Once in TWRP, you can either use "adb push" or "adb sideload":
ADB Push:
Run "adb devices" until your serial # shows up
run "adb push c:\somefolder\rom.zip /sdcard/" to push the rom zip to your phone's sdcard. It can take up to 10 mins to transfer it this way. You can use one of these: http://forum.xda-developers.com/showthread.php?t=2235248
ADB Sideload:
While in TWRP, select Advanced then ADB Sideload
Type "adb sideload c:\somefolder\rom.zip"
Once flashed, reboot to bootloader and flash the boot.img then reboot your phone.
Click to expand...
Click to collapse
hboot is 1.40.0000 so yeah, its updated... i will try the earlier version of TWRP, as the 2.5 didnt work for me either
ratcom said:
latest viper as a known issue where it leaves you stuck at that very point [/url]
Click to expand...
Click to collapse
What are you talking about?
Sent from my HTC One X using Tapatalk 2
Turge said:
What are you talking about?
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
If you install the international 1.0.7 from a full wipe you get stuck at that very point.
I'll follow up with m0n then see if he knows anything about it.
However, I'm pretty sure we're talking about the AT&T variant of the HOX+
Sent from my HTC One X using Tapatalk 2
I unfortunately have fallen victim to inexperience. I thought I could figure this out again, but it's been too long since I've rooted anything.
I did the rumrunner unlock, and that all went well. I then downloaded the viper rom, and from there my progress stopped.
Followed instructions for rumrunner, all worked, ended up on the bootloader screen.
Went and downloaded the Viper rom.
Tried to find my phone through my PC, but it wasn't available. So I used the bootloader menu to select recovery, as the directions VIA the Viper how-to.
The phone turned off, and ended up in a screen with a red triangle screen and wouldn't respond at all. No buttons worked, holding down any of them did nothing but make the bottom 3 icons flash.
So I unplugged my phone from the computer, and it turns on now, but to a normal home screen. I cannot figure out how to get back into the bootloader screen.
I did put the extracted Viper rom file into the download folder in my DNA, but I haven't been able to get past the issue of entering recovery to start wiping material.
You went to the stock Android recovery, which tells me you need to install a custom recovery. Find the threads for either Philz CWM Advanced or TWRP 2.6.3 beta and follow those directions, although you're going to need to set up ADB and make sure it's working. You won't be able to install a custom recovery without your computer recognizing your phone in fastboot mode.
Sent from my Galaxy Nexus using xda app-developers app
webeougher said:
You went to the stock Android recovery, which tells me you need to install a custom recovery. Find the threads for either Philz CWM Advanced or TWRP 2.6.3 beta and follow those directions, although you're going to need to set up ADB and make sure it's working. You won't be able to install a custom recovery without your computer recognizing your phone in fastboot mode.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Guh, I cannot figure out the ADB. I found a couple (Nexus tools and ADB Drivers from some guy on youtube) and I cannot get them to install.
I feel way in over my head, I don't remember it being this difficult a couple years ago.
cunningStunts said:
Guh, I cannot figure out the ADB. I found a couple (Nexus tools and ADB Drivers from some guy on youtube) and I cannot get them to install.
I feel way in over my head, I don't remember it being this difficult a couple years ago.
Click to expand...
Click to collapse
Try pdanet if you're having issues with drivers.
Sent from my HTC6435LVW using Tapatalk
durgis said:
Try pdanet if you're having issues with drivers.
Sent from my HTC6435LVW using Tapatalk
Click to expand...
Click to collapse
After some work last night, I finally got it. Research through this forum is invaluable!
So I've tried researching this slight issue and I have seen a lot of different solutions but none of them apply to my particular problem. My phone works just fine when booted regularly and charges just fine. The only time I'm having an issue is if I boot into recovery. I just installed twrp 2.7.0.3 and tried to reboot in order to flash supersu. No dice. I've tried rebooting into fastboot and reflashing and I've tried the M8 toolkit. Reflashing works, but still won't boot to recovery and the toolkit just hangs trying to flash the file. I think that's where my issue lies. I waited 19 minutes and eventually closed the program and just rebooted. I'm thinking this caused an issue and corrupted my recovery but i figured reflashing would solve this.
I was wondering if someone could clarify this for me, in which i'll just sit tight and wait until an ruu releases and stick with stock sense. The phone works perfectly so I can deal for a little while. I was just hoping to move to the GPe rom and get xposed running on it.
Thanks yall. I'll keep searching until I have to go to work and if I find a solution before anyone responds I'll update this post so it can be locked.
I would make sure you adb files are up to date, and try flashing philz recovery instead.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
HolyAngel said:
I would make sure you adb files are up to date, and try flashing philz recovery instead.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Are you using philz instead? I flashed twrp and it's very buggy. Did you fastboot flash recovery etc...? How can I install philz over twrp?
Thanks
Sent from my HTC One_M8
yeah im using philz, have been since it came out as i thought the same about twrp, tons of issues.
definitely 'fastboot flash recovery philz_touch_6.25.5-m8.img'
It'll apply itself right over your current recovery no problem :good:
pokedroid said:
So I've tried researching this slight issue and I have seen a lot of different solutions but none of them apply to my particular problem. My phone works just fine when booted regularly and charges just fine. The only time I'm having an issue is if I boot into recovery. I just installed twrp 2.7.0.3 and tried to reboot in order to flash supersu. No dice. I've tried rebooting into fastboot and reflashing and I've tried the M8 toolkit. Reflashing works, but still won't boot to recovery and the toolkit just hangs trying to flash the file. I think that's where my issue lies. I waited 19 minutes and eventually closed the program and just rebooted. I'm thinking this caused an issue and corrupted my recovery but i figured reflashing would solve this.
I was wondering if someone could clarify this for me, in which i'll just sit tight and wait until an ruu releases and stick with stock sense. The phone works perfectly so I can deal for a little while. I was just hoping to move to the GPe rom and get xposed running on it.
Thanks yall. I'll keep searching until I have to go to work and if I find a solution before anyone responds I'll update this post so it can be locked.
Click to expand...
Click to collapse
Seems like every problem in here is when someone uses a toolkit. IMO it is easier just to use the commands. There is nothing wrong with twrp as most people including myself are using it flawlessly. Download fresh copy of twrp. Make sure you get .img file, not .zip. Boot your phone, plug in and type "adb reboot bootloader" it will reboot to fastboot, if not, you do not have newest adb drivers, get this fixed before moving on. once in bootloader type "fastboot reboot-bootloader" this will just reboot your boot loader and let you know fastboot is working. If not fix this. next move to your directory with twrp and type "fastboot flash recovery twrp***.img" should only take 5 seconds. next type fastboot reboot to make sure system is still booting. Then type "adb reboot recovery" and it should go to twrp. Make sure you are getting the UL_CA twrp and not the whl. whl is for sprint and will not work. let me know. UL_CA is not available on official site. search the xda forums for it.
I actually tried the commands first and couldn't get it that's why I tried the toolkit. That's actually what ended up working for me though, but at least I'm good to go! I should have updated this a few days ago but forgot lol this thread can be locked if a mod wants to. Thanks all
Sent from my HTC One_M8 using Tapatalk
HolyAngel said:
yeah im using philz, have been since it came out as i thought the same about twrp, tons of issues.
definitely 'fastboot flash recovery philz_touch_6.25.5-m8.img'
It'll apply itself right over your current recovery no problem :good:
Click to expand...
Click to collapse
Which version of the recovery did you download? I can't find an AT&T version . Just regular M8 version. Just wanna make sure
Sent from my HTC One_M8 using Tapatalk
Z51 said:
Which version of the recovery did you download? I can't find an AT&T version . Just regular M8 version. Just wanna make sure
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
The regular m8 version in original android development ^^
Sent from my HTC One_M8 using XDA Premium 4 mobile app