Since I can't post to development thread for this ROM and I only see a question regarding Bluetooth stability, but no answer, I would like to report that when using a Voyager+ Pro call audio is often not sent to the BT device. Sometimes I can switch back to earpiece or speaker and get the audio back sometimes I can't. Other times, if I toggle from BT to earpiece / speaker back to BT I get the audio on the BT device. I want to be sure the Twistedumbrella knows about this.
If there is a solution, please let me know. Otherwise, thanks for the work on this ROM. I hope it is stable enough for daily use soon.
Mike
Related
Since I cannot post to the CM7 developer forum where I feel this question likely belongs...I am posting here.
I updated to cm-7.1.0-RC1.7-Thunderbolt and have been having trouble with Bluetooth (BT) audio when making calls. The situation is interesting and only happens when there is a change in power source for the device outside of a call. For example, the following will fail to send audio to BT:
Unplugged, battery as source.
BT connect.
Place call
No BT audio.
Disable BT, audio on phone or speaker.
Enable BT again, usually returns to BT. Cool, everything works.
But, now I disconnect from that call and...
Switch to USB power.
Place call (BT still connected).
No BT audio.
...rest of above...
Now, if I don't change power source, that is, I successfully use the enable/disable BT audio to get the first call working, all subsequent calls without power source change work just fine -- everytime.
But, if I change power source, no BT audio without disable/enable. If I switch during a call, there is no issue, BT audio works.
I've also had a few issues with calls not being placed and having to redial a number of times, but that could just be VZW.
I did not have any issues with RC1.6 and will probably flash back. Otherwise, I LOVE CM7 -- best thing ever.
Anyone else have these issues or care to post to the Development forum for me?
If you're going to ask someone, you should ask slayher (and get a logcat of the issue happening or he can't help you much). The reason you can't ask where you "think" it should be is because development for the Thunderbolt is still unofficial and not supported directly by the Cyanogen team.
If you send slayher a PM (probably better to at rootzwiki than here since he doesn't seem to follow the thread here anymore) with a logcat dump of when the issue happens, he can help you or find him on IRC in the freenode network at #slayher (the channel).
The situation is like this, i connected my bluetooth earpiece, but don't have any sound when calling, and i switch to handfree or loud speaker, then i can hear the sound, when turn back to bluetooth, no sound, i have maximum the volumn... can anyone help me?
I have flashed my SGS2 to MIUI 1.9.30, the same time i tried to flash to cyanogenmod as well, the result is same...
It's MIUI bug. It hopes to be fixed next release
Thank, i have solved this problem with flash Galnet Miui weekly build, the latest one.
Anyway this ain't the right place to ask question.
Sent from my GT-I9100 using xda premium
Actually, it's Cyanogen's bug, and since MIUI is Cyanogen based, it didn't work there as well.
But latest nightly of Cyanogen have this resolved, so it should be in MIUI as well (or very soon)
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
Hi Folks
Hope someone has an advice or opinion for a problem i have and did not find a solution searching through the forums. The 4.2.2 Bluetooth sound quality is no issue and also no distractions when using with my Parrot Asteroid in my car.
My problem is that when I am finished driving and have an active conversation running and I switch back to device speaker (internal or external does not matter!!!), the sound never comes back to the speakers but the microphone is switching properly to the device's mike iso the BT system. If I switch back to Bluetooth I get the sound back to the speakers of the car.
Same symptom on all the 3 4.2 ROMs I loaded so far (currently running on Dragon's Fusion ROM).
Thanks for any help!
I have exactly the same problem and by far no solution.
Hi people.
I have found thread mentioned about these problems, but unfortunately, I have no permission to post in developer's forum, so I will post the problem here.
After installing the cm-10.1-20130513-NIGHTLY-p760, i had problem while setting sound volume at 80% - 100%, or if someone calls me while playing the music. Audio on phone completely freezes and cannot talk, nor cannot listen anything. Audio on phone completely stocks. I had to reset the phone to make audio working. This problem mentioned at http://forum.xda-developers.com/showthread.php?t=2190300&page=27 by VladimirCicanci and donACEsko. Solution was the mikegapinski' patch (found it at http://forum.xda-developers.com/showthread.php?t=2202222).
Another problem I have: cannot answer by pressing the button on headphones. When I am listening music and someone calls me, I hear the ringing tone in headphones, and on phone standard speaker also hear it. This is the strange behavior. Pressing the button on headphones does nothing. If I answer on the screen of phone, conversation is taking place correctly: phones and microphone are working. Also, I cannot end the call by pressing the button on the headphones - it doesn't working. Headphones are original, coming with the phone and working on P700 at another phone.
Can somebody help, I will appreciate it.
Thank you
Stick with RC2, the nightlies are buggy and full of problems (not always though)
it has already been mentioned: don't rant about problems in nightly builds
reset, flash the RC2 again and wait for a stable release, it's around the corner :silly:
hamdimo said:
Stick with RC2, the nightlies are buggy and full of problems (not always though)
it has already been mentioned: don't rant about problems in nightly builds
reset, flash the RC2 again and wait for a stable release, it's around the corner :silly:
Click to expand...
Click to collapse
No. Better install today's lastest nightly build when it's out. CM10.1 RC had no changes regarding our phone. Follow CM 10.1 thread.
I will wait some time and than install fresh nightly from zero.
I know this is a bit off topic but does anyone know if there are plans for CM to come to the P768? Or is it the problem of no source code for 768 JB?
Sent from my LG-P768
Hi all,
I looked everywhere but could not find a solution to a problem I've been having for a long time now.
I apologise if it's inappropriate to open a new thread but I cannot find any other solution.
I've been using AOKP milestone for some time on my I9300 (S3) device and am very happy with all the features and battery life etc.
I've been having one problem with the bluetooth and am unable to find out the solution or root cause of the problem.
Recently I have even tried a factory reset and flashed the milestone 2 latest rom but still am having the same issue,
Here are the details of the problem;
During a call using bluetooth handsfree car kit or earpiece it's not possible to resume / direct / transfer the call to the devices internal or external speaker.
Once I turn off the bluetooth due to arrival to destination and having to leave the car or battery dying in the earpiece I can hear the person on the other end for 3 seconds and then total silence but the other end can hear me clearly. Once I turn on the BT or external speakers on / off I can hear for 3 more seconds and so on,
What am I missing.
Please help.
did you find a solution to your issue.
I have the exact same, but running on CM10.2
Issue is when I am on a call with bluetooth I can't switch to speaker, or phone while in call. If I do so, they cannot hear me and I cannot hear them. If I switch back to bluetooth everything works again... Anyone else know a fix for this?
I cant find any solution for this? anybody know..
no solution yet
I looked all over and tried different roms and issue remains the same.
I used Omega based samsung and only then it worked fine but I do not like Sam. Based roms.
Please keep me posted if you solve this.
Also another problem I'm facing is, if capturing a video in a concert / club, video sound is very nosiy and un hearable, picture is ok though
Can you verify this too please?