Hi all,
I am selling my S2, and would like to a) get rid of the triangle, and b) go back to a stock rom. Is this a simple process, and maybe there's a guide?
I am downloading I9100XWLPW_I9100XSALP6_XSA.zip | 695.6 MB – is that an OK file?
I am also downloading GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEUPL5.7z
Which would be better?
I'm in Australia, but it was a UK sourced, unlocked phone to begin with.
extract and flash using Odin 1900XWLP7 rom to go back to stock and then use trianle away which could be found in this forum to reset the counter.
after flashing and using triangle away, do not forget to go recovery and wipe the cache, go to advance and wipe daavik cache and do a factory reset to remove all personal information and apps.
thread for triangle away.
http://forum.xda-developers.com/showthread.php?t=1494114
LOL if you flash official firmware you wont get triangle RTFM.
Flash XWLP7, turn on phone, in phone *2767*3855# and profit.
You need to flash PDA, PHONE, CSC your data will reset automatically.
Sent from my GT-I9100 using xda premium
I am rid of triangle, thanks to dongle method. Now, to find out where to get XWLP7 from...
Or is that "GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEUPL5.7z" that I have already downloaded?
I am going to us Mobile Odin, which I think takes the full package (Modem.. etc)
You will lose your triangle if you flash stock.
Sent from my GT-I9100 using xda premium
Thanks. Triangle is gone now...
Just trying to find right package.
Is GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEUPL5.7z the right thing? Would that contain kernel, modem etc?
In there is a tar.md5 file, which has a whole lot of files.
U said u had your phone from UK original , which provider ? Vodafone / Orange / T-Mobile / O2 / H3G
Then i can recomand u the latest firmware to flash to it so u return it as "pure stock"
SilviuMik said:
U said u had your phone from UK original , which provider ? Vodafone / Orange / T-Mobile / O2 / H3G
Then i can recomand u the latest firmware to flash to it so u return it as "pure stock"
Click to expand...
Click to collapse
I bought it from Handtek, so.. not sure what it had. Was shipped to Australia and has been working on the Telstra network. And it's being sold in Australia.
Cralis said:
I bought it from Handtek, so.. not sure what it had. Was shipped to Australia and has been working on the Telstra network. And it's being sold in Australia.
Click to expand...
Click to collapse
Ok then u will need :
Product Code: GT-I9100LKJXSA
Latest firmware: I9100XWLPW/I9100XSALP6/I9100XXLQ6/I9100XWLPW
Modified: 9/3/2012 5:32:31 PM
Filename: GT-I9100_XSA_1_20120903173205_4qpiu8bio8.zip.enc2
Or if the new client will have Optus
Product Code: GT-I9100LKJOPS
Latest firmware: I9100XWLPW/I9100OPSLP6/I9100XXLQ6/I9100XWLPW
Modified: 8/31/2012 11:44:48 PM
Filename: GT-I9100_OPS_1_20120831234422_hzan6jkrf4.zip.enc2
Let me know if u need the files i can upload them for u , or u can go to http://fus.nanzen.se/ and download Check Fus Downloader 2.1. and download the file for yourself directly from Samsung`s servers
Would be great if you send me a link to them...
What is a enc2 extension?
Isn't it tar?
Sounds like GT-I9100LKJXSA is best if it's unbranded. Allowing the buyer to have bloat free and unlocked phone.
Edit: Actually, found a link here:
http://www.droidevelopers.com/f364/...gt-i9100-4-0-4-ice-cream-sandwich-update.html
Will grab.
Cralis said:
Would be great if you send me a link to them...
What is a enc2 extension?
Isn't it tar?
Sounds like GT-I9100LKJXSA is best if it's unbranded. Allowing the buyer to have bloat free and unlocked phone.
Edit: Actually, found a link here:
http://www.droidevelopers.com/f364/...gt-i9100-4-0-4-ice-cream-sandwich-update.html
Will grab.
Click to expand...
Click to collapse
GT-I9100LKJXSA is Gingerbread what i linked to u is ICS 4.0.4
enc2 is just a name the program adds but that is actually an zip file and inside is the tar u need for flashing
Flashed, and now on 4.0.4!
Thanks for the help and advice!
Cralis said:
Flashed, and now on 4.0.4!
Thanks for the help and advice!
Click to expand...
Click to collapse
If you have flashed an unbranded stock firmware could you explain the steps you took to flash it like what file you used and a detailed step by step?
Sent from my GT-I9100 using xda app-developers app
Related
Hello,
i would like some guidance on the rooting side of things. with every page i read im getting more and more confused.
i have installed/flashed litening rom.
ive used the sim unlock tool to unlock my phone.
im confused on all of the unsecure and secure stuff.
i would like my phone back to how i had it when i bought it, without the root access etc.
am i right in thinking that i would need the latest stock secure kernal which i would flash in exactly the same way as i flashed litening? or am i getting the wrong end of the stick.
or would i have to flash the specific three firmware (im not bothered about having all the three stuff on it but if i have to then so be it)
You need to follow Chainfire thread,
http://forum.xda-developers.com/showthread.php?t=1103399
Don't get too much confused, its simple.
BTW- Aren't you already rooted as you are on Litening ROM!
Sent from my GT-I9100
I am rooted which was an easy process. I just can't get my head around all the different stock firmwares etc.
I would love to unlock my wife's S2 for her but want to know how to get it back to stock after.
Hope that makes sense?
Sent from my GT-I9100 using XDA App
joelk2 said:
I am rooted which was an easy process. I just can't get my head around all the different stock firmwares etc.
I would love to unlock my wife's S2 for her but want to know how to get it back to stock after.
Flash a stock rom .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Firmware is labelled year K 2011 month ABC release number 123
KG3 2011 July 3rd release .
XXX XEU OXA lettering is area of use for that rom .
jje
Click to expand...
Click to collapse
ok i downloaded
GT-I9100_XEU_I9100XWKF3_I9100XXKE7_I9100XEUKD1
i couldnt see the KG3 one.
where do i find the csc to go with this?
If you want to get it back to stock "back to how it was when I bought it", don't use any KG firmware unless you're from Poland or Brazil - IIRC, they're the only 2 areas that KG firmware is "official", i.e., flashable via Kies.
Sounds like you'll need a KF firmware. If you can't remember what your firmware originally was, try this:
http://fus.nanzen.se/
- will also tell you your latest available official update.
KG and KH 2.3.4
Rest is 2.3.3
Edit - see you've got KF3 - for your scenario, 99% sure it's the right choice.
ok so ive downloaded that one, it was a self extracting.exe file
i now have a tar file.
do i use odin again and put this tar in the pda part?
Anyone??
Sent from my GT-I9100 using XDA App
if the package one has one .tar file then yes.
keep in mind you will not have root access after this
Brilliant thanks all
Sent from my GT-I9100 using XDA App
Also after reverting back to stock roms, do your self a favor and buy a USB JIG (Samsung galaxy S JIG) from ebay for like 10 dollars. You can use this to reset the Binary Counter in Download mode, before you ship of any phone for say Warranty issues
I have been researching the net on this and the posts in http://forum.xda-developers.com/showthread.php?t=1075278.
I haven't been able to post in there as I am a new user, but if someone can help me with this, it would be great.
I'm trying to upgrade my firmware to XXKH3 - Android 2.3.4.
My current version is:
PDA: I91000XWKE7
PHONE: I9100XXKE4
CSC: I9100OPSKE4
My Galaxy S II is rooted and it's on the OPTUS network in Australia.
My question is, how should I go about it?
Do I download the XXKH3 Stock Kernel: http://www.multiupload.com/C4DRUIJTLL and place that in PDA and PHONE in Odin?
And for CSC do I get this: Optus OPSKG1 CSC: http://www.multiupload.com/EPWZTIMS1F and place it in CSC?
I want to be able to use the OPTUS network on XXKH3, but without OPTUS bloatware. I'm just not sure which files to get so I can be with OPTUS on an Australian firmware if that makes any sense.
My last question is, would this then wipe my data? Or not?
I appreciate any help on this.
justmiike said:
I have been researching the net on this and the posts in http://forum.xda-developers.com/showthread.php?t=1075278.
I haven't been able to post in there as I am a new user, but if someone can help me with this, it would be great.
I'm trying to upgrade my firmware to XXKH3 - Android 2.3.4.
My current version is:
PDA: I91000XWKE7
PHONE: I9100XXKE4
CSC: I9100OPSKE4
My Galaxy S II is rooted and it's on the OPTUS network in Australia.
Why question is, how should I go about it?
Do I download the XXKH3 Stock Kernel: http://www.multiupload.com/C4DRUIJTLL and place that in PDA and PHONE in Odin?
And for CSC do I get this: Optus OPSKG1 CSC: http://www.multiupload.com/EPWZTIMS1F and place it in CSC?
I want to be able to use the OPTUS network on XXKH3, but without OPTUS bloatware. I'm just not sure which files to get so I can be with OPTUS on an Australian firmware if that makes any sense.
My last question is, would this then wipe my data? Or not?
I appreciate any help on this.
Click to expand...
Click to collapse
you are referring to the right thread. clear instructions are given on that thread.
choose the PDA option.
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
You don't have to change the kernel or root or unroot to flash a new stock firmware.
You can then flash the kernel of your choice.
If you want the CF-root KH3 kernel. refer this thread
If you want to flash stock KH3 kernel you can also do that.
as far as operator bloatware is concerned search for operator specific bloatware removal scripts which can be executed using Gscript app . or a simpler option would be to freeze or uninstall the bloatware apps using Titanium back up Pro.
Thank you for the fast reply.
So pretty much all I need to do is put the XXKH3 Stock Kernel in the PDA option and that's it. So the OPTUS network will not be affected correct?
Then root it and I'm done?
Thanks again!
justmiike said:
Thank you for the fast reply.
So pretty much all I need to do is put the XXKH3 Stock Kernel in the PDA option and that's it. So the OPTUS network will not be affected correct?
Then root it and I'm done?
Thanks again!
Click to expand...
Click to collapse
Exactly. I did this yesterday.
Sent from my GT-I9100 using Tapatalk
Excellent. Thanks.
I guess my last question is, by doing this, putting the XXKH3 in the PDA option, will this wipe my data?
Should I back up?
Back up apps with Titanium Pro
Sent from my GT-I9100 using Tapatalk
Alright will do. Thanks for all your help guys!
let me know how you get on,am severely tempted to flash new firmware just for a change!
Hm. I just put XXKH3 Stock Kernel in PDA and flashed it but my phone still says Android 2.3.3. I used the CF-root KH3 kernel as well to root it again.
What do I need to do to get it to Android 2.3.4? Do I have to place it in PHONE as well?
The ROM is 2.3.4, just about any ROM in original development is. What you are trying to flash is kernel. Best of luck.
Sent from my GT-I9100 using Tapatalk
justmiike said:
Hm. I just put XXKH3 Stock Kernel in PDA and flashed it but my phone still says Android 2.3.3. I used the CF-root KH3 kernel as well to root it again.
What do I need to do to get it to Android 2.3.4? Do I have to place it in PHONE as well?
Click to expand...
Click to collapse
Er, Kernel is kernel and firmware is firmware. Flashing the kernel won't update the firmware, just the kernel.
Alright I think I understand now.
Downloading the package, which should do it and I guess the stock kernel is used to root/rid yourself of the yellow triangle.
jr866gooner said:
let me know how you get on,am severely tempted to flash new firmware just for a change!
Click to expand...
Click to collapse
It went well, the phone is working great.
My data didn't get wiped.
Follow this thread: http://forum.xda-developers.com/showthread.php?t=1075278.
Download the XXKH3 package.
I also used Titanium to backup my apps just in case and MyBackup Pro for contacts etc. but haven't needed to use it.
After you flash that (if you want to root the phone) go to this page http://forum.xda-developers.com/showthread.php?t=1103399 and get CF-Root-SGS2_XX_OXA_KH3-v4.1-CWM4.zip. Put that in PDA and flash it.
To get rid of the yellow triangle, follow this post http://forum.xda-developers.com/showpost.php?p=14283369&postcount=2.
That's it. Thanks for all your help guys!
ok so lets say I chose new stock firmware to avoid the triangle,then later wanted to be official,could i plug my phone into kies and updatd to official 2.3.4 without problems?
i would like to try oranges firmware without rooting the device and voiding my warranty!
Intratech said:
Er, Kernel is kernel and firmware is firmware. Flashing the kernel won't update the firmware, just the kernel.
Click to expand...
Click to collapse
Understand now, 1 more question my stock rom 2.3.3 it is xwkf1 Singapore version thinking to flash it to the lastest 2.3.4 Europe/ USA rom does it support chinese?
Sent from my GT-I9100 using XDA Premium App
Hello xda-developers this it my first post, but it will be more and I will try to help you.
I have a SGS2, bought from Romania, but the CSC code is "XEF" which probably means that it was imported form France. Now I want to change my CSC in "HAT" or "COA" according to my country but I don't want to lose my warranty.
1) There is any method to do this?
2) If I will find the CSC files, flashing only this with Odin is possible and if yes I lose my warranty? I only flashed AIO or PDA,CSC,BOOT files in the mean time on my second phone,Samsung i5700, but never only one of those.
I tried with CSC Selector from Play and with Preconfig code, but my phone have no Multi-CSC, it have only "XEF".
My SGS2 informations:
PDA: I9100XWKJ2
PHONE: I9100XXKJ4
CSC I9100XEFKJ1
Thank you very much for your answers and sorry for my bad English
no need to change it unless you need something specific in that csc.
I want to upgrade to ICS via Kies, but in Romania the update exists and in France it doesn't... That's why I want this
Sent from my GT-I9100 using Tapatalk
razvan0311 said:
I want to upgrade to ICS via Kies, but in Romania the update exists and in France it doesn't... That's why I want this
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1486996
razvan0311 said:
I want to upgrade to ICS via Kies, but in Romania the update exists and in France it doesn't... That's why I want this
Click to expand...
Click to collapse
Just flash XWLP8 Frankenstein with Odin. Kies is a complete piece of crap. Uninstall it right now and just leave the samsung usb drivers.
The aforementioned package already includes everything you need... and it's official... and it's newer than the package you are planning to flash ; )
@bala_gamer: I will look forward CSC files and just flash them with Odin... But is it possibile? My device is not rooted...
@victorator: Doing this I will lose my warranty...Am I right?
Thanks a lot for the answers
Sent from my GT-I9100 using Tapatalk
flahing via odin dosent need root.
razvan0311 said:
@victorator: Doing this I will lose my warranty...Am I right?
Click to expand...
Click to collapse
Go into settings->about phone and write down what you have now.
Worst case IF you ever really need to get warranty just flash this package...
End of story. The link I gave you gives you the newest official ICS rom, non-rooted. It doesn't increase the custom binary counter (that's how they check if you messed with your phone) and it is official. Just flash it.
Ok, I didn't know that I can put the phone into download mode and flash a new firmware without increase the counter, thx
Sent from my GT-I9100 using Tapatalk
razvan0311 said:
Ok, I didn't know that I can put the phone into download mode and flash a new firmware without increase the counter, thx
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
The only thing that increases the counter is flashing specifically a kernel via Odin that is not signed by Samsung.
This is why flashing some ROMs won't necessarily increase the counter: If you flash a ROM that includes a kernel that is signed by Samsung, it will keep the counter at zero.
ctomgee said:
The only thing that increases the counter is flashing specifically a kernel via Odin that is not signed by Samsung.
This is why flashing some ROMs won't necessarily increase the counter: If you flash a ROM that includes a kernel that is signed by Samsung, it will keep the counter at zero.
Click to expand...
Click to collapse
I understend now, thx mate
I'm faceing a problem, I had no permission to post in devolpment areas yet so I ask you again some questions
1) Link to Odin in this thread: http://forum.xda-developers.com/showthread.php?t=1075278 is dead Is it ok if I download Odin 1.83 from Sammobile?
2) Under:
XWLP8
Android 4.0.3
This package has: PDA: XWLP8| Modem/phone: XXLPS| CSC: OXALPS
Download: Download
I see this: XWLP8 Stock Kernel: Download
Password: [email protected]
I have to put this kernel for not loosing my warranty? If yes, how?
Thank you again
razvan0311 said:
I'm faceing a problem, I had no permission to post in devolpment areas yet so I ask you again some questions
1) Link to Odin in this thread: http://forum.xda-developers.com/showthread.php?t=1075278 is dead Is it ok if I download Odin 1.83 from Sammobile?
Click to expand...
Click to collapse
Should be fine. But the link isn't broken, per se. Just right-click it, and "save link as". That will save the .7z file to wherever you want.
razvan0311 said:
2) Under:
XWLP8
Android 4.0.3
This package has: PDA: XWLP8| Modem/phone: XXLPS| CSC: OXALPS
Download: Download
I see this: XWLP8 Stock Kernel: Download
Password: [email protected]
I have to put this kernel for not loosing my warranty? If yes, how?
Thank you again
Click to expand...
Click to collapse
That kernel is posted just in case you need it, if you flash a custom or insecure kernel, and want to flash back to stock. If you don't flash a custom of insecure kernel, you won't need it. Wouldn't hurt you to download it anyways though, again, just in case you need it later.
Ok, thank you ... And, only to be sure, this version will not count in download mode in case I have to sent the phone to sercice, no?
Sent from my GT-I9100 using Tapatalk
razvan0311 said:
Ok, thank you ... And, only to be sure, this version will not count in download mode in case I have to sent the phone to sercice, no?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
No
kanye92 said:
No
Click to expand...
Click to collapse
Thanks I will flash it right now
And there is any way to check the counter?
razvan0311 said:
Ok, thank you ... And, only to be sure, this version will not count in download mode in case I have to sent the phone to sercice, no?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
As I said above, it will not. The firmware has a kernel signed by Samsung in it.
razvan0311 said:
Thanks I will flash it right now
And there is any way to check the counter?
Click to expand...
Click to collapse
When you go into Download mode, it will display a count if you have ever flashed a non-Samsung signed kernel. If you have never done so, it will not display a count at all.
ctomgee said:
As I said above, it will not. The firmware has a kernel signed by Samsung in it.
When you go into Download mode, it will display a count if you have ever flashed a non-Samsung signed kernel. If you have never done so, it will not display a count at all.
Click to expand...
Click to collapse
Thank you very much... I will flash this night, for the moment I am trying to figure out how to backup my current ROM and data
razvan0311 said:
Thank you very much... I will flash this night, for the moment I am trying to figure out how to backup my current ROM and data
Click to expand...
Click to collapse
You'll have to install CWM recovery to do this... which means flashing a kernel NOT signed by Samsung, which means increasing your counter.
ctomgee said:
You'll have to install CWM recovery to do this... which means flashing a kernel NOT signed by Samsung, which means increasing your counter.
Click to expand...
Click to collapse
So there isn't any method... I will flash it right now
EDIT:
It worked, thank you all
Okay so long story short I was stuck in bootloop so I restored my phone back to like 3 months ago and now when I try to upgrade it back to ICS from 2.3.6 in Kies it says I cant it gives this error:
Your device does not support software upgrading via Kies.
Current fireware version : I9100XWKI4/I900XEUKH2/I9100XXLPS/I9100XWKI4 (XEU)
Please help and tell me what I must do I am so lost
Really no one knows?!?!?! Here is some more info if it helps...
GT-I9100
2.3.4
I9100XXLPS
2.6.35.7-I9100XWKI4-CL575468
[email protected] #2
GINGERBREAD.XWKI4
*#1234#
See what you get
I think you will get Lps in phone which is modem.
Just flash the stock modem back and you will get kies working.
Sent from my GT-I9100 using Tapatalk 2
atifsh said:
*#1234#
See what you get
I think you will get Lps in phone which is modem.
Just flash the stock modem back and you will get kies working.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
PDA : I9100XWKI4
PHONE : I9100XXLPS
CSC : I9100XEUKH2
Yeap you were right so which do I flash it to can you give me a link please? I been download one for about an hour now and im scared its the wrong one the file name is: I9100UMKK1_I9100TCEKK1_TCE
Yes wrong
You have to correct modem via Odin and use kies or you can flash the stock Ics whole ROM via Odin, time saving
Sent from my GT-I9100
atifsh said:
Yes wrong
You have to correct modem via Odin and use kies or you can flash the stock Ics whole ROM via Odin, time saving
Sent from my GT-I9100
Click to expand...
Click to collapse
You lost me there LOL how can I fix the modem via Odin? I would also like to upgrade to ICS via Kies since the downloads are so slow over here via Kies would be a lot faster, I download at 350kbs but when I download the full files for use with Odin it only goes at 50kbs soooooo how can I fix the modem? I am downloading a firmware flash will that fix it all?
Just get the UK ICS from Sammobile and flash using Odin. Or use checkfus download.
or wait one hour, I'll post some links, on the move now
Sent from my GT-I9100
Well my phone is the international version so I really don't know which one to chose from sammobile.com :/ The only UK version without a carrier in parenthesis is: I9100XWLP7 4.0.3 2012 April I9100XEULP5 United Kingdom / Ireland
m8 jus download modem frm modem collection and flash it or use cwm ...its simple as tht.or roll back one step behind frm current firmware an then everything is stock again....cheeeerz
Link please for the modem collection? Also explain which one to use please I don't want to screw my phone up anymore then it already is :/
ANOTHER THING!!! ... I live in Dominican Republic, so if I use Check Fus and download the Dominican Republic one can I flash it and it will all change to DR and work again via Kies to upgrade to ICS? Sorry I'm such a noob
atifsh said:
Just get the UK ICS from Sammobile and flash using Odin. Or use checkfus download.
or wait one hour, I'll post some links, on the move now
Sent from my GT-I9100
Click to expand...
Click to collapse
Its been an hour, I NEED YOUUUUUUU!!! LOL You're the only one who helps me! LOL I'm a little impatient sometimes xD
Griingo said:
Its been an hour, I NEED YOUUUUUUU!!! LOL You're the only one who helps me! LOL I'm a little impatient sometimes xD
Click to expand...
Click to collapse
wat u want modem (gb) or ics ?
rocky23 said:
wat u want modem (gb) or ics ?
Click to expand...
Click to collapse
I'm a noob I have no idea I just want my phone to work with Kies again
EDIT: Ignore what I just said, I need it for GB 2.3.4 thats what I have now
Griingo said:
EDIT: Ignore what I just said, I need it for GB 2.3.4 thats what I have now
Click to expand...
Click to collapse
http://skywanker.net/download/downl...9100_XEU_I9100XWKI4_I9100XEUKH2_I9100XXKI1.7z download i think its 3 file pakage ,if yes then jus flash the modem in pda in odin....
1: if you want to save something save it on pc or external sdcard
2: dial *2767*3855# it will wipe your phone to factory defaults
3: learn how to use odin
4: download that ICS file uk/ireland thats fine
5: using odin flash it will be fine and you get ICS stock
6: after reboot dial that code again
http://forum.xda-developers.com/showthread.php?t=1544487
you can use sammobile and checkfus
you can flash any rom for i9100 it will work
you dont waste your time for finding modem and flashing when at the end you want ICS.
atifsh said:
1: if you want to save something save it on pc or external sdcard
2: dial *2767*3855# it will wipe your phone to factory defaults
3: learn how to use odin
4: download that ICS file uk/ireland thats fine
5: using odin flash it will be fine and you get ICS stock
6: after reboot dial that code again
http://forum.xda-developers.com/showthread.php?t=1544487
you can use sammobile and checkfus
you can flash any rom for i9100 it will work
you dont waste your time for finding modem and flashing when at the end you want ICS.
Click to expand...
Click to collapse
Okay I wiped it, so anything from checkfus will work? I can download any of themM
Griingo said:
Okay I wiped it, so anything from checkfus will work? I can download any of themM
Click to expand...
Click to collapse
yes as far its for i9100
atifsh said:
yes as far its for i9100
Click to expand...
Click to collapse
Okay well I am going to download one from that thread link you gave me the one that says:
I9100XWLP7 Download (Thanks To SamMobile!)
Base Firmware: I9100XWLP7 (4.0.3)
Region United Kingdom / Ireland
Carrier: SIM FREE (Generic)
Build Date: 3rd April 2012
Modem: XXLPS
CSC: XEULP5 (XEU)
Change List: 340913
CF-Root v5.4 LP7: Download
Because it has no carrier it is XXLPS and XEU exactly what I have, THANKS!!! I hope this works I'll let you know after it downloads, unless you have a hotfile account I could use to download it instantly?
Hi,
I am starting to developing on Android and i just got a used Galaxy S2 GT-9100 ( Canada ). This phone is rooted on an other firmware. I want to go back on the last official firmware in order to make Samsung Kies working. I really don't understand why when i look for official samsung firmware on google i finish on unknown blog ....
There is a way to get the last official Samsung Firmware ?
Thanks
Go to sammobile.com. register for free. Enter your device details. Download ROM. Flash it via Odin.
Sent from my GT-I9100 using Tapatalk 2
how to flash a sammoblie firmware file
Spiralzz said:
Go to sammobile.com. register for free. Enter your device details. Download ROM. Flash it via Odin.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hello from me! My first post!!!
Well I was wandering how can I flash the sammobile dowloaded firmware with Odin3. I mean full flash so I can change the phone and CSC not only the pda. Because what I get from sammoblie is a one file bundle *.tar.md5 .
- Just in case, I recently bought from ebay a GT-9100 locked with T-Mobile and stocked with Gingerbread. I am not a customer of T-Mobile so I unlocked it and upgraded it to latest firmware 4.0.4
- The problem is the signal strength is very poor (but not always - sometimes, for about 10 minutes I might get full H+ and after that no signal (wtf)).
I am not sure whether it is a software or hardware fault and wanted to downgrade back to Gingerbread.
Any help is apreciated.
b4rdarian said:
Hello from me! My first post!!!
Well I was wandering how can I flash the sammobile dowloaded firmware with Odin3. I mean full flash so I can change the phone and CSC not only the pda. Because what I get from sammoblie is a one file bundle *.tar.md5 .
- Just in case, I recently bought from ebay a GT-9100 locked with T-Mobile and stocked with Gingerbread. I am not a customer of T-Mobile so I unlocked it and upgraded it to latest firmware 4.0.4
- The problem is the signal strength is very poor (but not always - sometimes, for about 10 minutes I might get full H+ and after that no signal (wtf)).
I am not sure whether it is a software or hardware fault and wanted to downgrade back to Gingerbread.
Any help is apreciated.
Click to expand...
Click to collapse
tar.md5 is complete rom with modem and csc togather using odin just place the tat file in pda and flash.
Cosmic Blue said:
tar.md5 is complete rom with modem and csc togather using odin just place the tat file in pda and flash.
Click to expand...
Click to collapse
Any idea on the second part of my problem?
Plus, when I flashed Gingerbread I got stuck in set up wizard due to errors. And I was not able to factory reset the phone.
b4rdarian said:
Hello from me! My first post!!!
Well I was wandering how can I flash the sammobile dowloaded firmware with Odin3. I mean full flash so I can change the phone and CSC not only the pda. Because what I get from sammoblie is a one file bundle *.tar.md5 .
- Just in case, I recently bought from ebay a GT-9100 locked with T-Mobile and stocked with Gingerbread. I am not a customer of T-Mobile so I unlocked it and upgraded it to latest firmware 4.0.4
<snip>
Click to expand...
Click to collapse
T-Mobile where? In Europe? Or the US?
ctomgee said:
T-Mobile where? In Europe? Or the US?
Click to expand...
Click to collapse
b4rdarian said:
Hello from me! My first post!!!
Well I was wandering how can I flash the sammobile dowloaded firmware with Odin3. I mean full flash so I can change the phone and CSC not only the pda. Because what I get from sammoblie is a one file bundle *.tar.md5 .
- Just in case, I recently bought from ebay a GT-9100 locked with T-Mobile and stocked with Gingerbread. I am not a customer of T-Mobile so I unlocked it and upgraded it to latest firmware 4.0.4
- The problem is the signal strength is very poor (but not always - sometimes, for about 10 minutes I might get full H+ and after that no signal (wtf)).
I am not sure whether it is a software or hardware fault and wanted to downgrade back to Gingerbread.
Any help is apreciated.
Click to expand...
Click to collapse
I have the exact same problem, UK, Tmobile/EE