Hello all, after flashing El-Diablo_LTE_V1.2 plate was loaded into the recovery, if you choose a normal reboot, it is a recovery, if you choose to reboot recovery, it loads the system. Help solve the problem.
try flashing again. something went wrong
tried several times, always the same, to wipe does not load after boot, but as described above post.
this is very strange. its like some wires got crossed..
i'd try flashing everything again.
recovery, rom, kernel
I never realized, I tried to flash all over again, since I'm the nucleus, then I thought that the problem in boot, flash it, but did not help.
I think the problem is HBOOT, could not give it, not the one that lies at the firmware LTE.
somebody tell me how to throw properly load address
Related
Hey guys,
Not exactly what to make of this which is why I'm posting. Here's the run down. Started off running Scamble_v01.3[CM6.1.3] for quite some time with everything just fine. About 2 weeks back, decided it was finally time to step it up to a Gingerbread ROM, and went with Wolfbreak's. For the first week, everything ran perfectly fine. This past week, I started to have issues with it rebooting every time I would run an app. Finally, this morning, it rebooted, and then just as it would get to the lock screen, it would say formatting SD card and then reboot. It would continue to do this repeatedly. I tried reinstalling in xRecovery (mind you I did Factory Reset (Full wipe), Wipe Cache Partition, & Wipe Dalvik Cache as well).
With high hopes, I restarted it. Unfortunately, this didn't change anything. I took my microSD card out and put Wolfbreak's updated ROM on it which just came out in hopes that maybe the file was corrupted somehow, just to find that when I tried to install it through xRecovery it, gave me an error that it couldn't because the SD card was busy. Stated in his ROM even, it says that you need to backup the ROM just for this very reason, however the only backup I had was of Scamble_v01.3[CM6.1.3] since I found it pointless to try and back up a messed up ROM.
Not knowing what else to try, and knowing that that was the last stable state my x10 was in, I restored that. Once again, it did nothing as far as the boot loop. I've gotten to the point where I have used FlashTool to flash the Generic Gingerbread ROM which just as all the others, gets to the first screen (which asks me to choose a language) and then reboots.
I'm completely stuck here and can't think of what I may be missing here. Any help would be greatly appreciated.
downwardzspiral said:
Hey guys,
Not exactly what to make of this which is why I'm posting. Here's the run down. Started off running Scamble_v01.3[CM6.1.3] for quite some time with everything just fine. About 2 weeks back, decided it was finally time to step it up to a Gingerbread ROM, and went with Wolfbreak's. For the first week, everything ran perfectly fine. This past week, I started to have issues with it rebooting every time I would run an app. Finally, this morning, it rebooted, and then just as it would get to the lock screen, it would say formatting SD card and then reboot. It would continue to do this repeatedly. I tried reinstalling in xRecovery (mind you I did Factory Reset (Full wipe), Wipe Cache Partition, & Wipe Dalvik Cache as well).
With high hopes, I restarted it. Unfortunately, this didn't change anything. I took my microSD card out and put Wolfbreak's updated ROM on it which just came out in hopes that maybe the file was corrupted somehow, just to find that when I tried to install it through xRecovery it, gave me an error that it couldn't because the SD card was busy. Stated in his ROM even, it says that you need to backup the ROM just for this very reason, however the only backup I had was of Scamble_v01.3[CM6.1.3] since I found it pointless to try and back up a messed up ROM.
Not knowing what else to try, and knowing that that was the last stable state my x10 was in, I restored that. Once again, it did nothing as far as the boot loop. I've gotten to the point where I have used FlashTool to flash the Generic Gingerbread ROM which just as all the others, gets to the first screen (which asks me to choose a language) and then reboots.
I'm completely stuck here and can't think of what I may be missing here. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Maybe give flashtool a go, just flash one of the stock firmwares.
Already tried that. As stated before, it gets to the first screen which prompts me to chose a language, and then immediately reboots
I am a relative noob at flashing roms and rooting phones, but last night I ran into an issue. My phone was having all sorts of problems so I was going to put it back to factory, then start from scratch. I then decided to just flash a different rom. here is what happened.
I deleted SuperSU - this was done as part of the process to unroot and put back to factory, after this step I decided to flash a different rom
Put new ROM on phones internal memory as well as SD card
Wipe data
wipe cache and delvic cache
install new rom
Black screen
In an attempt to unbrick I relocked my bootloader.
Now, my phone can power on (Give white screen and HTC logo), then go black, and I can access Recovery mode. That is all.
I have plugged the phone to my computer and tried running the RUU, but the RUU will not recognize the phone.
I am not sure what to do to unbrick my phone and get it working again. Any and all help would be most appreciated!
Sorry I can't be more eloquent with my words, but I'm at work. I will be responding throughout the day, though.
thanks again so much to anyone that can help!
Try running it straight from bootloader
I loaded into Bootloader, selected Fastboot(USB), ran the .exe and it still won't recognize the phone. However, I did get recovery unlocked again. So I can get into recovery mode, flash all the ROMs I want, mount and unmount, yet still everytime I flash a new ROM it still boots to a black screen. Am I doing this right?
Try a Rom with kernel installer
Thanks! Since I am still a little new could you tell me how I would spot a ROM with kernel installer or could you point me to any one that could work? From then, it's the same process as flashing any other ROM? Do I need to do something with the kernel?
Meanbean and stock with goodies are the 2 that I'm certain of. Meanbean needs to be flashed twice the first time
Thanks so much for your help, I will post my results soon!
Failed
Here's what it says. Sorry for the blurry picture. I followed directions closely.
What version of recovery are you using? You may need to update it. Assuming you have a pc, try mounting the internal memory to pc through twrp. Windows will automatically tell you to format if its damaged
2.1 Updating now
omg it finally worked! Updated TWRP using fastboot and flashed MeanBean. Thank you so much!!!
I recently rooted my phone and everything was fine. This morning I installed a debloated rom http://forum.xda-developers.com/showthread.php?t=2296109 and It seemed to work but after I rebooted the phone just sits at a screen that says
Samsung
an unlocked icon
Custom
I can still get into Odin and TWRP but nothing I do seems to solve my problem. I have verified the MD5 of the image as well as trying to install a backup I made prior to flashing but the restore fails.
Does anyone know what I can do?
I should add that TWRP asks for a password when I load it but I never explicitly set one and also it seems to have trouble with the partition table.
Update: Solved maybe? I got this phone to boot but I am not sure what happened. I flashed a rom from TWRP several times and finally one took ... still would like info from someone who actually knows what is going on as I am not sure this wont happen again
Update: So it seems that every time I something happens and the drive or loader gets encrypted and it no longer boots. the "solution" is to do a full wipe then install a rom. This happens every time i reboot and I would really like a solution to this.
I'm not sure if this is in the right thread or not, but hopefully someone can help me,
I flashed CM11 onto my Y300-151 and it had constant random reboots, which is a problem with the ROM, so I decided to try and install OmniROM onto it; which is meant to be stable. So I launch the TWRP (2.7.1.0), the only recovery for the Huawei Y300 apart from stock, and I attempt to flash it after a factory reset, it black screened, I let it sit for a while but to no avail. I try again and it doesn't work, so I think perhaps the ROM is incompatible. (Which is more than likely since even though it said it was for Y300 it was for u8951 not u8833) so I try to flash SlimKat, same issue, I think perhaps it's the Kernel, so I try flashing a new Kernel, once again a black screen.
Of course the only thing I can think of now is that it must be the recovery! So I put it into fastboot and try to flash recovery, to which point it sends fine, almost instantly, but it sits infinitely on "writing 'recovery' ..." it's been sitting like this for about 20 minutes now.
Something weird is I can check for the bootloader state and it says unlocked, yet adb says no devices are connected.
I CAN however, still boot into Android (CM11 albeit) and TWRP Recovery, as if nothing had ever happened, apart from the factory reset on the ROM.
How can I fix this issue? I really want to get rid of CM11 it is to unstable for me to cope with! It randomly reboots while I'm listening to Pandora in the shower... :'(
I am rooted and S-Off. I am using the ViperOne custom ROM for my phone.
The end goal is for me to update my firmware, because my phone has an over 10 minutes boot time normally. (Not an exaggeration. I have actually timed it with a timer.) I read that in order to fix this, I should try to update the firmware by going to stock recovery and doing an OTA update.
My TWRP has worked flawlessly for me over the years, but for some reason it won't work anymore. It will hang on the boot screen for over an hour. After that hour, I assumed it's not slowly booting. (As a bit of background, recovery would boot quickly while my phone still had problems with 10 minute boot times).
Another piece of information is that the last time TWRP worked was when I used it to install .zip files from Titanium to get all my apps working. That worked perfectly fine, my apps got updated, and no trouble. I wish I could say what happened between then and now, but from what I can remember, I just used my phone normally, such as using web browsers and games. I don't remember messing with any system files.
I do know that ClockWorkMod recovery DOES work if I flash that, but my nandroids are all on TWRP. I have tried to flash different version of TWRP as well. It doesn't seem to matter which one I flash, my phone reacts exactly the same.
Another thing to note, I'm not sure if it's significant or not, is that when I got into hboot, I get the following message for a split second. I can't read the file names exactly, but I got the extensions. Then I get the normal screen with the vol instructions and choices to go to fastboot, recovery, etc... The message reads:
SD Checking...
Loading [(something).zip]
No Image!
Loading [(something).nbh]
No Image or wrong image!
Loading [(something).zip]
Loading [(something).nbh]
No Image or wrong image!
I hope this is a decent amount of information. I tried to include as much as I could, but if I'm missing any critical details, let me know and I will GREATLY appreciate your help!
have u tried to rewrite the image, download the new TWRP and load it via adb
Bradl79 said:
have u tried to rewrite the image, download the new TWRP and load it via adb
Click to expand...
Click to collapse
Well, I did do that. I rewrote different versions of the image and none worked.
Sadly, my solution was to completely wipe my phone. More than the default factory reset.
I'm so it has been solved, but probably not in the most practical way for others with a similar problem.
Battletooth said:
Well, I did do that. I rewrote different versions of the image and none worked.
Sadly, my solution was to completely wipe my phone. More than the default factory reset.
I'm so it has been solved, but probably not in the most practical way for others with a similar problem.
Click to expand...
Click to collapse
Having the exact same issue. Attempted to install twrp-2.8.6.0-m8.img using adb, but TWRP never loads. I can load prior versions but same results. Going to HBOOT I get a bunch of messages related to 0P6BDIAG.zip, 0P6BIMG.zip
and some .nbh. I think it's looking on my SDCARD for those.
If you're looking to update your firmware, you can use an official RUU to change the firmware of your phone. You can read more about it in this stickied thread in the general forum to see if it fits your needs. If you decide to do this, your phone will be completely stock after the RUU finishes running so use fastboot to flash TWRP (or whichever recovery you prefer).
Regarding the messages you see in hboot, it will always check for those files if you have an external sdcard mounted. If they are present, you will be given the option to flash the update. If not, you will get regular hboot access after the check. It is completely normal and nothing to worry about.