I've spent my entire day trying to flash a recovery image on my streak to no avail. I've rooted it using the super one click, have superuser on my device, along with clockworkmod.
I've confirmed my device is rooted using z4root.
I've tried flashing the recovery via clockwork, it says it was successful, yet when I reboot to recovery, I always end up in the regular OS, like all it did was reboot. Furthermore, trying to manually get there, holding down the buttons, tells me that the stanard recovery wasn't actually overwritten. When I go through fastboot and flash it that way, both computer and streak tell me that everything was successful. Yet, the recovery was still not overwritten.
My end goal is to put Steve's ROM on the streak, but I can't even get the recovery overwritten with clockworkmod.
I have a Dell Streak OEM:340. Thats the locked ATT version, which I think might be a part of the problem.
How do I end up with Steve's rom?
Sounds like you are using ROM manager? That does not work well with the Streak. See this article. ROM manager may actually flash your recovery, but does not work to start the phone in that mode.
You can flash the recovery image to your phone in fastboot mode. Here is a tool to help.
You get to fastboot mode by starting the Streak while holding the camera and power buttons at the same time. Then select fastboot from the top right of the screen and plug your phone into your computer. You will need the Dell drivers for this.
Also be aware that you need to rename install-recovery-sh to something else to prevent the stock recovery from being installed when the phone restarts. It's in the folder /etc. You have to use root explorer or an alternate method to do this, but it requires root.
I am using a ROM manger, but if that doesn't work as well, I'll stop.
I've been fastbooting it the majority of the time, flashing the ROM, but it says I've done it correctly, even though I obviously haven't. So far, all I know is that it's been rooted, and the recovery flashed via fastboot.
kyrillos27 said:
I am using a ROM manger, but if that doesn't work as well, I'll stop.
I've been fastbooting it the majority of the time, flashing the ROM, but it says I've done it correctly, even though I obviously haven't. So far, all I know is that it's been rooted, and the recovery flashed via fastboot.
Click to expand...
Click to collapse
Have you renamed the install-recovery.sh file so that the custom recovery won't be replaced by the stock recovery when you reboot? If not - do so.
Make sure that the Streakdroid rom you want is in the root of the SD Card along with the install.txt file.
If you can get into fastboot mode and connect to your computer I suggest using MultiRecoveryFlasher Streakmod recovery. You can reboot the phone from there also.
When you reboot you want to get to recovery mode. Turn your phone off then press the power button tile the leds light up and as soon as they do hold down BOTH volume buttons. See this gallery for what Streammod recovery should look like. Selecting the #2 option will take you to the streakmod recovery options. You use the "apply sdcard:update.zip" to install the ROM.
See the release thread for the ROM you are installing for more info and post any problems or questions you have with the ROM in that thread.
I have not renamed the install-recovery.sh file. in fact, haven't seen one through the process. To be honest, I'm not sure this part has been done at all by me. How do I go about doing that?
Furthermore, choosing the second option in recovery doesn't give methe streakmod options, it just tells me everything will be erased (stock Dell recovery). How do I make sure that this gets corrected?
For the record, marvin02, thank you thus far for the amount of help you've been giving me.
kyrillos27 said:
I have not renamed the install-recovery.sh file. in fact, haven't seen one through the process. To be honest, I'm not sure this part has been done at all by me. How do I go about doing that?
Furthermore, choosing the second option in recovery doesn't give methe streakmod options, it just tells me everything will be erased (stock Dell recovery). How do I make sure that this gets corrected?
For the record, marvin02, thank you thus far for the amount of help you've been giving me.
Click to expand...
Click to collapse
The file install-recovery.sh is a script that runs each time your phone is started. It will replace a custom recovery (streakmod) with the stock recovery when your phone starts, so the next time you enter recovery mode you are back at the stock recovery.
If you are going to dstay with a stock ROM, but want a custom recovery you have to rename the file. The easiest way (IMO) is to use Root Explorer which is an app you have to buy. You just open root explorer and the open the folder named etc and find install-recovery.sh long pres on it to get a menu to pop up and then select rename.
You don't have to do that to get a streakdroid rom installed if you enter recovery without letting the phone restart first.
Put the streakdroid rom file and the install.tx on the root of your SD card
Turn your phone off
Turn phone on in fastboot mode (camera and power buttons at the same time)
Use this tool to to flash the recovery you want
Using the same tool you can reboot the phone
As the phone reboots (wait for the leds to turn on just like they do when you restart the phone) hold down BOTH volume buttons to enter recovery. If you let the phone boot normally and you have not renamed install-recovery.sh the custom recovery will be over written.
Select option 2 and you should be taken to the streakmod options (images here)
Select apply sdcard:update.zip from the recovery menu
There will be two options on the next screen, select the one that lets you navigate to/select a file and then select the ROM file you put on your SD Card.
The ROM should install, be patient when it reboots it can take a few minutes.
I have the Galaxy Note SGH-I717R (Rogers version), with the stock android 4.0.4 installed. I want to install a custom ROM but I cannot get TWRP Recovery to work on this phone. I have followed all the guides but it will not work, even though it appears to install correctly. I put my phone into download mode, start odin in admin mode, attach my phone, it is recognized by odin, then I choose PDA and select the TWRP Recovery tar file (which is the correct one for my device). After I click Start on Odin it goes through these messages as it installs and reboots my device:
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
and the box in the upper left corner turns green and says "Pass!".
After this, I have my phone usb disconnected and I reboot into recovery mode.. Only when it starts in recovery, it is the same stock recovery mode that comes with stock android! With this, I cannot flash the custom ROM because it gives the error that verification failed.
I have tried installing TWRP through goo manager as well, but when I choose the openrecoveryscript option, it says that nothing was found for my device.
What am I missing here? How can I install this custom recovery to allow me to flash a custom ROM?
I also tried this with 2 different versions of TWRP - 2.5.0.0-quincyatt.img and the latest 2.6.3.0-quincyatt.img
This may seem like a silly question but does the TWRP package include root in it? I have had to root with Clockwork mod tar first and then I have installed TWRP after that.
There are free utilities on Google Play that can tell you if you are rooted or not.
Download the 2.6.1.0.IMG.tar file and flash it. Also change the USB port you are using, and reinstall the Samsung USB drivers before attempting it again.
fraughtsigewulf said:
This may seem like a silly question but does the TWRP package include root in it? I have had to root with Clockwork mod tar first and then I have installed TWRP after that.
There are free utilities on Google Play that can tell you if you are rooted or not.
Click to expand...
Click to collapse
according to others, you do not need to be rooted to flash a rom.
I flashed a zip file for TWRP, just like a normal rom. once you flash, it replaces your cwm.
the error????????? if it is status 7, your recovery needs to be updated
OK, I've solved the problem. I followed another video that said to uncheck auto reboot on odin when installing TWRP, then remove the battery and unplug once it loads it on. I did this, and ended up bricking my phone, it wouldn't start saying need to fix bad firmware in kies recovery. Kies wouldn't even detect my phone at this point, so I started Odin again and was able to run a recovery from there by pressing start, it said it removed something, and was successfully recovered. I tried rebooting into recovery mode again on my phone, and magically it loaded into TWRP! From there I was able to flash the custom Revolt ROM and now my phone is running fine.
You got it. The Canadian phones have a script that reinstalls the 3e stock recovery on the reboot. So you have to pull the battery to stoo that script from running. When you rhen boot into recovery it makes it the default recovery.
ok, i've flashed via odin, pulled the battery and started it up but it still goes to stock recovery.
I've also flashed, shut it down, pulled the battery, rebooted and then selected reboot in recovery with no luck either.
Am I missing something?
Thanks
rangercaptain said:
You got it. The Canadian phones have a script that reinstalls the 3e stock recovery on the reboot. So you have to pull the battery to stoo that script from running. When you rhen boot into recovery it makes it the default recovery.
Click to expand...
Click to collapse
Thanks! I was trying to instal ClockworkMod Recovery with no luck, I have an Australian Version of GT-I9506, and your tip worked for me! Solved... :victory::victory:
can't get it done
rangercaptain said:
You got it. The Canadian phones have a script that reinstalls the 3e stock recovery on the reboot. So you have to pull the battery to stoo that script from running. When you rhen boot into recovery it makes it the default recovery.
Click to expand...
Click to collapse
I just can't get recovery to work after pulling the battery, it keeps on saying firmware error. What I am doing wrong?
rangercaptain said:
You got it. The Canadian phones have a script that reinstalls the 3e stock recovery on the reboot. So you have to pull the battery to stoo that script from running. When you rhen boot into recovery it makes it the default recovery.
Click to expand...
Click to collapse
mayoni said:
I just can't get recovery to work after pulling the battery, it keeps on saying firmware error. What I am doing wrong?
Click to expand...
Click to collapse
I'm having the same problem with an SGH-I717R. I flash TWRP with ODIN, pull the battery and disconnect the USB cable so the phone powers off. Then I hold Vol Up+Vol Down+Power until the phone vibrates, I see the "Samsung Note" logo on the screen for a fraction of a second, then it goes into "ODIN MODE", tells me how many custom binaries I've flashed, etc, and says "Firmware upgrade encountered and issue" and tells me to run recovery from Kies. If I restart the device normally, it goes into this mode as well. I can return the phone to a usable state by booting into download mode, flashing TWRP again with ODIN, then letting the phone reboot without holding any buttons down, but then recovery is back to stock 3e.
I've also tried this using CWM and Heimdall, as per the instructions on the CM wiki, with the same results. I've uninstalled and reinstalled the USB drivers and also enabled USB debugging on the device, since I read somewhere that might be an issue. I realize I'm replying to a 2-year old comment from rangercaptain, but do you have any more suggestions?
mdm_ said:
I'm having the same problem with an SGH-I717R. I flash TWRP with ODIN, pull the battery and disconnect the USB cable so the phone powers off. Then I hold Vol Up+Vol Down+Power until the phone vibrates, I see the "Samsung Note" logo on the screen for a fraction of a second, then it goes into "ODIN MODE", tells me how many custom binaries I've flashed, etc, and says "Firmware upgrade encountered and issue" and tells me to run recovery from Kies. If I restart the device normally, it goes into this mode as well. I can return the phone to a usable state by booting into download mode, flashing TWRP again with ODIN, then letting the phone reboot without holding any buttons down, but then recovery is back to stock 3e.
I've also tried this using CWM and Heimdall, as per the instructions on the CM wiki, with the same results. I've uninstalled and reinstalled the USB drivers and also enabled USB debugging on the device, since I read somewhere that might be an issue. I realize I'm replying to a 2-year old comment from rangercaptain, but do you have any more suggestions?
Click to expand...
Click to collapse
There is an Odin flashable cwm at rootgalaxynote. Once that is flashed you can load a su zip to your phone and flash or change to twrp by flashing it with cwm..not Odin. You then just reboot to recovery and you will be in twrp. You should probably use one from gimmeitorilltell version 2.8.0.0 or higher. I use 2.8.0.0 as it supports theming still. If you need more detail hit me up for the links. Searching the forum or googling should get you there though.
Sent from my SAMSUNG-SGH-I717
developweb said:
There is an Odin flashable cwm at rootgalaxynote. Once that is flashed you can load a su zip to your phone and flash or change to twrp by flashing it with cwm..not Odin. You then just reboot to recovery and you will be in twrp. You should probably use one from gimmeitorilltell version 2.8.0.0 or higher. I use 2.8.0.0 as it supports theming still. If you need more detail hit me up for the links. Searching the forum or googling should get you there though.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Thanks for the pointers! Would you say this tutorial[1] is more or less what you're suggesting I try? And then from there, flash TWRP 2.8.0.0 from CWM recovery?
[1] XDA won't let me embed a link because my account is too new, but it's a page on rootgalaxynote that ends with /galaxy-note-i717-roms/how-to-root-att-galaxy-note-sgh-i717-icsgingerbreadeasiest-method/
EDIT: Ugh, scratch that idea. I followed the instructions on that site and exactly the same thing happened. Flashing CWM through ODIN appears to work fine, but if I reboot immediately after flashing I end up with stock 3e recovery again, and if I hold Vol Up+Vol Down+Power to reboot immediately after flashing, I get the ODIN mode "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." message and can't get past it until I flash CWM with ODIN again and let the stock recovery overwrite on reboot.
EDIT #2: So I finally got it to boot CWM by holding Vol Up+Vol Down as ODIN reboots the device, but trying to flash the Superuser zip from that site results in an error and the instant you boot system, it overwrites recovery with stock again. Am I correct to assume that if I can get into CWM and flash a custom ROM, recovery will stop being reset to stock on every boot?
mdm_ said:
Thanks for the pointers! Would you say this tutorial[1] is more or less what you're suggesting I try? And then from there, flash TWRP 2.8.0.0 from CWM recovery?
[1] XDA won't let me embed a link because my account is too new, but it's a page on rootgalaxynote that ends with /galaxy-note-i717-roms/how-to-root-att-galaxy-note-sgh-i717-icsgingerbreadeasiest-method/
EDIT: Ugh, scratch that idea. I followed the instructions on that site and exactly the same thing happened. Flashing CWM through ODIN appears to work fine, but if I reboot immediately after flashing I end up with stock 3e recovery again, and if I hold Vol Up+Vol Down+Power to reboot immediately after flashing, I get the ODIN mode "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." message and can't get past it until I flash CWM with ODIN again and let the stock recovery overwrite on reboot.
EDIT #2: So I finally got it to boot CWM by holding Vol Up+Vol Down as ODIN reboots the device, but trying to flash the Superuser zip from that site results in an error and the instant you boot system, it overwrites recovery with stock again. Am I correct to assume that if I can get into CWM and flash a custom ROM, recovery will stop being reset to stock on every boot?
Click to expand...
Click to collapse
Did you repeat steps as instructed at this point?
If you get any errors at this point, don’t worry about it and repeat Steps 13 to Step 16 twice more and reboot. You will still get root.
Sent from my SAMSUNG-SGH-I717
developweb said:
Did you repeat steps as instructed at this point?
If you get any errors at this point, don’t worry about it and repeat Steps 13 to Step 16 twice more and reboot. You will still get root.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Yep, I was finally able to root the device doing that, but I still can't get CWM recovery to persist. I can flash it with ODIN, then hold down Vol Up+Vol Down as ODIN resets the device, which gets me into CWM recovery. From there I can do the usual CWM recovery stuff, and if I reboot, then hold down Vol Up+Vol Down immediately, I can get back into CWM recovery. I can do this as many times as I like and it always brings up CWM recovery. As soon as I let the phone boot the stock OS, CWM recovery is gone and I'm back to stock 3e. My end goal is to flash a custom ROM to this device; I assume if I do that, the stock recovery will stop being restored on every boot?
mdm_ said:
Yep, I was finally able to root the device doing that, but I still can't get CWM recovery to persist. I can flash it with ODIN, then hold down Vol Up+Vol Down as ODIN resets the device, which gets me into CWM recovery. From there I can do the usual CWM recovery stuff, and if I reboot, then hold down Vol Up+Vol Down immediately, I can get back into CWM recovery. I can do this as many times as I like and it always brings up CWM recovery. As soon as I let the phone boot the stock OS, CWM recovery is gone and I'm back to stock 3e. My end goal is to flash a custom ROM to this device; I assume if I do that, the stock recovery will stop being restored on every boot?
Click to expand...
Click to collapse
Sorry this didn't work for you, but I'll throw in the last bit anyway.
" With Android 4.0.4 update, your phone might overwrite the ClockworkMod Recovery you flashed in ODIN. To get around the problem, simply flash ClockworkMod Recovery again in ODIN, then when you see “PASS!”, immediately hold down Volume Up and Volume Down buttons, you should be in ClockworkMod Recovery instead of the Belly-up Andy Android figure."
Sent from my SAMSUNG-SGH-I717
Same Problem
Huge problem
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
scarface195894 said:
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
Click to expand...
Click to collapse
Pull battery let it sit for two minutes. Push menu button, volume down button, and power button at the same time boot into download mode. once there flash a fresh copy of your OS which ever version of KitKat your running. You lose all your personal data, but your beyond that now. Then here is link to my thread should answer all your questions http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 enjoy !!!
uknow said:
Yeah ive said it a few times this should not be used
If youve bricked your phone you can get back into your phone by holding volume down menu botton and power botton at the same time when it pops up the warning screen to enter download mode hit cancel your phone will then boot up after your phone is on if you do not have a computer the way you fix the phone so you dont have to do this every time your phone is off you need mobile odin and a kitkat cwm.img.tar for our phone flash it and problem solved you can now boot into cwm recovery then if you want you can flash a twrp img zip through cwm or just keep cwm hope this helps
Ps if you Google mobile odin the dev gives it away on his xda mobile odin page
Click to expand...
Click to collapse
.............^^^^^^...........
stuck in recovery loop also
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
update-- i found an updated version of the philz tar file and installed it with odin and that got me out of the loop..just havent tried to get back into recovery yet...lol
Cat1970 said:
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
Click to expand...
Click to collapse
First, pull the battery for a minute then reinstall hold the power, menu, and volume down buttons at the same time and boot into download mode. The version of Phil'z CWM you flashed is to old for 4.4.4 NK4. Now download to your desktop the right Philz CWM recovery file (Phil'z_Touch_6.48.4-hlte.tar.md5 ) here is the link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/hlte/ there are two listed use the second one. Flash with odin and you should be good to go. Go to my thread http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 for more info.
done exactly as you said and the same screen came up saying recovery is not seandroid enforcing and then it jumps to Philz Touch 6 so im assuming everything is right now...i really appreciate the help! tyvm
different rom
ok..i installed cyanogen rom..i also used titanium backup..i want to go back to where i was but i dont see titanium backup on there anymore..how do i revert back?
i guess i need to update my phone n900p (help)
my rooted note 3 was running 5.0 L so i tried flashing a custom recovery both TWR and CWM now its stuck in boot loop. i read all the post showing you how to get out the bootloop. how ever i still need to put a recovery on my phone are there any updated links for this with odin because i was using the odin 3.0 sorry odin 307
Hi, I have this problem. I had rooted galaxy S3 i9300, with Android Revolution ROM. I wanted to flash Liquid Smooth ROM and I did something wrong because I soft bricked it. So I downloaded some stock ROM (Not the one I used to have, completely different one with older android I didn't notice version I looked for region) flashed it with Odin, then rooted phone with Odin and flashed CWM with Odin, so I could do nandroid restore of the older ROM I had. The problem is I can't get to CWM recovery. When I turn on phone while holding Vol-, Home and Power buttons, I don't see Samsung logo, I get straight to download mode. Somewhere I read that you need to install CWM first and then root, so I did that as well and it didn't help. Can I restore my backups some other way? Or what should I do?
Edit: I installed ROM manager and tried to install CWM. It downloaded and then I got Flashing 100/100 and nothing happened. It froze and CWM was not installed. Then I found app CWM (idk if it was there before I didn't notice it) So I tried to restore backup with that and it did not worked as well.
Actually I wouldn't mind using this older version, I would say it's faster than newer one, but my network is not working. No signal so I need to repair that fast bc I don't have any other backup phone.
I'd say your best bet would be to try:
Flashing your stock rom again using odin.
Let it reboot and load, then switch it off.
Go back into download mode and flash cwm or philz touch or whatever custom recovery you choose. Make sure you untick the reboot when finished option in odin or else the phone will revert back to stock recovery.
Unplug the phone and pull the battery.
Hold down the vol+ / home / power button for about 5 seconds and then let the power button go. This should load the recovery. Reboot from recovery and it should be a permanent fix.
I'd then root and apply supersu and then install a custom power menu (xposed module + gravitybox) which allows you to boot into recovery/download mode straight from the power menu.
Good luck.
I did what you said, installed stock ROM, right one (I guess), flashed cwm, unticked reboot, after that I unplugged phone and pulled out battery. And now, if I try to enter recovery I just enter download mode again. Idk what did I do wrong?
niC00L147 said:
I did what you said, installed stock ROM, right one (I guess), flashed cwm, unticked reboot, after that I unplugged phone and pulled out battery. And now, if I try to enter recovery I just enter download mode again. Idk what did I do wrong?
Click to expand...
Click to collapse
Press volume up for recovery. Volume down for download mode.
Sent from my GT-i9300 using XDA Free mobile app