Hi forum, this is my problem, I just unlock my WT19 with wotan server.... and it say me "disconect your phone and turn on"....
after that i do that, my phone dont recognize the sim card... and I dont know why.....
can someone help me please??
no SIM detected
DanyBerumen said:
Hi forum, this is my problem, I just unlock my WT19 with wotan server.... and it say me "disconect your phone and turn on"....
after that i do that, my phone dont recognize the sim card... and I dont know why.....
can someone help me please??
Click to expand...
Click to collapse
wow,
I did the same with fastgsm ( its X Unlock Tool looks incredibly similar to wotans -quite identic?)
And my phone is the Xperia Ray ST18i:
ST18i detects a SIM card when booting, for I have to tip the correct SIM PIN.
Wrong PIN leads to re-asking for PIN.
Right PIN completes booting, but then there is "no SIM detected - insert SIM card and reboot".
No problem, if I only take photos, just use gps and always can use Wifi.
But sometimes I really want to use my phone to make a phone call or use 3G internet connection.
Now I heard something about 'radio something fix' in software.
Even some SIM cards should be unreadable for some ROM ???
Somebody there with more profund knowledge about that?
chorknabe1
btw, DanyBerumen,
might be better to NOT update the firmware over the air FOTA
with this I knocked out my Ray after unlocking with fastgsm.
Fortunately I found a way to fix it again... -but still "no SIM is detected" :crying:
chorknabe1 said:
wow,
I did the same with fastgsm ( its X Unlock Tool looks incredibly similar to wotans -quite identic?)
And my phone is the Xperia Ray ST18i:
ST18i detects a SIM card when booting, for I have to tip the correct SIM PIN.
Wrong PIN leads to re-asking for PIN.
Right PIN completes booting, but then there is "no SIM detected - insert SIM card and reboot".
No problem, if I only take photos, just use gps and always can use Wifi.
But sometimes I really want to use my phone to make a phone call or use 3G internet connection.
Now I heard something about 'radio something fix' in software.
Even some SIM cards should be unreadable for some ROM ???
Somebody there with more profund knowledge about that?
chorknabe1
btw, DanyBerumen,
might be better to NOT update the firmware over the air FOTA
with this I knocked out my Ray after unlocking with fastgsm.
Fortunately I found a way to fix it again... -but still "no SIM is detected" :crying:
Click to expand...
Click to collapse
Hi!!
I tell you what I done, after a few reboots, I try to unlock my phone with s1tool, and when the process finished I turn on my phone and I have signal again!!!... Maybe this be a problem with the service, because the tool that I used is "X unlock tool" hehehe....
i hope that you can use your SIM card again
DanyBerumen said:
Hi!!
I tell you what I done, after a few reboots, I try to unlock my phone with s1tool, and when the process finished I turn on my phone and I have signal again!!!... Maybe this be a problem with the service, because the tool that I used is "X unlock tool" hehehe....
i hope that you can use your SIM card again
Click to expand...
Click to collapse
ahm :
happy NewYear !
didnt see your post, only gifts, cookies, fireworks...
sorry.
but now:
good idea, s1tool. but
What did Ray tell You: Bootloader unlock allowed - yes or no ?
mine is NO.
so I'm not so happy with this in this year. yet.
chorknabe1
Related
Was just luking into the new rom i flashed (Wolfbreak v6)
But by mistake i seted a code on my x10...
(X10 --> Settings --> Location & Security --> Set up SIM card lock --> Lock SIM card)
I thought it was the Pin request on startup.....
But wass something else.... :'(
I turned off ma cell...
tryed many things....
Its telling "Unable to change Lock SIM card status.....
Please Please Help......
Roming without calls / texts for more than a week now......
do u know the PIN and where exactly do u get this error !!
the error appears when i try to uncheck the Lock sim card option....
Unfortunately donno the pin.....
Itryed flashing different roms too.....
Plez help...
Try flashing the original firmware of se thru flashtool or try repairing ur phone thru seus ...or if u havent changed ur pin then try entering 0000 as password ..have u tried entering pin before even once if not then try the pin I gve..else the other methods ..
Hope it helps
Plz thank if it did
Sent from my X10i using XDA App
Dude thanks for ur support......
But,
I tryed Flashing the original SE rom through Update Service....
N also flashed Wolf.....
but of no use....
M stuck....
U got ne other way plez...????
ddddanger said:
Was just luking into the new rom i flashed (Wolfbreak v6)
But by mistake i seted a code on my x10...
(X10 --> Settings --> Location & Security --> Set up SIM card lock --> Lock SIM card)
I thought it was the Pin request on startup.....
But wass something else.... :'(
I turned off ma cell...
tryed many things....
Its telling "Unable to change Lock SIM card status.....
Please Please Help......
Roming without calls / texts for more than a week now......
Click to expand...
Click to collapse
I think you should contact your SIM card provider (telephone company) and ask for the unlock code (PUK) which is linked to your SIM card subscription and how to use the code to unlock.
Yes u need PUK code from sim card provider
Sent from my X10i using xda premium
I appreciate u all......
But its not about PUK code.....
Its that the phone isn't allowing any sim to connect to the network.....
the phone is blocked to the network......
Please cheak it out in X10 --> Settings --> Location & Security --> Set up SIM card lock --> Lock SIM card....
Its is in any x10 with any 2.3.3 rom.....
B careful..... dont block ur x10, like me..... :'(
I tryed other sims too.....
Plez help......
i think to unlock it u need to try entering Pin .. so did u try entering Pin ??? how many times u tried ??
did u try putting ur Sim Card in someone elses phone and see whats it showing ??
acerulz said:
i think to unlock it u need to try entering Pin .. so did u try entering Pin ??? how many times u tried ??
did u try putting ur Sim Card in someone elses phone and see whats it showing ??
Click to expand...
Click to collapse
tryed nearly 700 different pins.......no use....
the sim is working in another cell phone........
Sim is being detected by the x10....but isn't allowed to connect to a network.....
Ne other way out...???
Can u mke calls from ur sim using another phone...and does other sim works in urs
Sent from my X10i using XDA App
I can use that sim from another cell........
not a single sim is having network on my x10.....
anything more useful fokes....?????
did u try repairing it or tried flashing some new and different firmware from what u using on top of it !! so it asks for what when u uncheck option ??
acerulz said:
did u try repairing it or tried flashing some new and different firmware from what u using on top of it !! so it asks for what when u uncheck option ??
Click to expand...
Click to collapse
I Flashed 1.6, 2.1 and wolfbreakv6 2.3.3
but no use.......
Has my x10 got locked.......
have you tried a full wipe in xrecovery? try and clear everything?
kenectd said:
have you tried a full wipe in xrecovery? try and clear everything?
Click to expand...
Click to collapse
tryed that 2.....
When the first time the it requested the pin of my SIM CARD and after i wrote this puk, then the new pin, the phone started, then it sayed no service at my status bar.I cant go anyware,with sim on the phone,if i switch on the phone, the OS work, i can go to settings i can do anything like a normal cell....
only, i cant sms, call, internet, or nething related to network, coz of network block
(The new pin i entered dosent open the network block)
Can neone help me?
Sorry for my bad english ....Please help me.
Thanks
Would the following help?
Credit to wikiAnswer (TuRtLeHeRmIt and Applechunk)
A SIM card is locked by 2 or 4 passwords
PIN1
PIN2
PUK1
PUK2
PIN1 and PIN2 are programmable by the end user the code is 4-8 digits long usually you have 3 attempts to get the code right, if you lock PIN1 or PIN2 out you then need the PUK1 or PUK2 which is the PIN UNLOCK KEY which is an 8 digit code provided by your Service Provider get this code wrong 10 times and its time to buy a new SIM card
Well this depends on what kind of "lock" you mean. A SIM card can be password protected (usually 3-6 characters long) by going into the Security Settings on your phone which is usually where you can chgange your phone's lock as well if it has one.....if you enable a SIM password this password is saved onto the SIM card itself which is a good security issue because if somebody steals your SIM card they can't just simply put it in a new phone and be ready to go....they'd have to know your SIM password in order to even get the phone to fully load up and connect to the network. Another thing that can be done is a SIM card can be locked due to someone putting in a wrong password too many times....if you ever get to this screen on a cell phone call customer care because if you try too many times you will fry your SIM card which would mean you have to shell out another $20 or so.....if that doesn't sound like what you meant than to my knowledge the answer is no but otherwise I hope this helps
So according to this......
the password is stuck in my x10....
which i cannot erase, or change......
coz my sim is working on other cells.......
so, wat should i do now...???
Plez Got no proper solution till now.....
M restless without my x10.....
I have bought unlock code, entered it and it showed me that unlocking was unsuccessful, and now when I insert any sim card it boots properly and shows me no network :/
No one? Please help guys...
After inserting unlock code I can insert any sim card without any sim restrictions, but there is no network on my phone. But before unlocking there was...
daxsm said:
No one? Please help guys...
After inserting unlock code I can insert any sim card without any sim restrictions, but there is no network on my phone. But before unlocking there was...
Click to expand...
Click to collapse
I've unfortunately done the same thing,now i have no network,it asks me for a pin code but when it unlocks says sim card error.I've tried with different sim cards,still the same,please can anyone help?I have done this with the same phone as you,alcatel ot990,any progress?
Please can anyone help us,i'm without my phone for 5 days,there must be someone who can give us an answer!!!
Sorry if i'm spamming,but i'm hoping that someone here will see this thread,and maybe give me a helpful answer.I'm also hoping to see the creator of this thread,i want to know is there any progress on his phone,is there a way to repair this?This phone maybe doesn't cost much,but it isn't a small amount in country where i live,i can't afford myself a new phone!
Ok,
If you have a phonw wich is code frozen and no network after unlocking with code you should upload this ROM r1_de-branded_ot990-update-signed.zip and after that udating the phone with the update software wich you can download from Alcatel home page. After that your phone should work as before...
Sent from my ALCATEL one touch 990 using XDA App
jodank said:
Ok,
If you have a phonw wich is code frozen and no network after unlocking with code you should upload this ROM r1_de-branded_ot990-update-signed.zip and after that udating the phone with the update software wich you can download from Alcatel home page. After that your phone should work as before...
Sent from my ALCATEL one touch 990 using XDA App
Click to expand...
Click to collapse
I solved my problem,had to pay extra money,and now my unlocked phone is working just fine
Ok, same problem, jodanks way does not work but looks prommising to put back phone in factory state for possibly warranty issues.
From Tommy I hope I'll get the contact where he did fix his phone.
From eBay unlocker I got message I need Furious box.
I have bought a new Xperia Ray ST18a from Telus (Canada). I have successfully unlocked it using a code, called my voice mail without a problem. Then I downloaded Sony's PC companion to verify if the phone's software was up to date. When the update was finish, I tried to make another call and noticed the "Emergency Calls only. No Sim Card" message.
I used the Sim card in my old phone and it worked. I used another Sim card in my Ray, the 'No Sim card Message' was still there.
I sent the phone to Sony for repair and came back with again the same problem.
Anybody have a clue what is wrong with the phone?
The SIM lock Menu it shows:
[x Network 10
]
[] Network subset 0
[] Service provider 0
[] Corporate 0
[] SIM 0
Phone software version: 1248-9545_4.0.1.A.0.283 Generic -user
File System Version: Telus_4.0.1.A.0.283
S1 Boot version: 1241-3656-R9A029
ETS software Version: 1247-1301_7
Rooting Status: Bootloader Unlock Allowed: No
It's locked again
They have network locked your phone again. As for the SIM problem, maybe the phone/SIM contacts aren't clean enough. I don't think it's related to the network lock/unlock.
aristone said:
They have network locked your phone again. As for the SIM problem, maybe the phone/SIM contacts aren't clean enough. I don't think it's related to the network lock/unlock.
Click to expand...
Click to collapse
Thanks for the reply.
I have checked the contacts and even applied pressure on them when the phone was restarting. Same results.
How can you tell it's network locked again?
With which code did you unlock?
Does any other SIM card work?
According to the Network value, seems like the SIM-lock is still there...Is the phone branded?
Someguyfromhell said:
With which code did you unlock?
Does any other SIM card work?
According to the Network value, seems like the SIM-lock is still there...Is the phone branded?
Click to expand...
Click to collapse
Yes it's a branded phone.
I tried another SIM card from another cell phone and I'm still having the same message.
I bought an unlock code from a unlocking service from the internet.
Learned something yesterday!
Not all cell phones can prevent the insertion of the SIM card the wrong way!
On the Ray you can insert the card the wrong way and you will be able to install the battery and cover perfectly. I have re-inserted the SIM card in the right position and the "No SIM card" message disappeared and was able to unlock it with the same previous code. All is now fine.
I don't mind looking like a foul and hope this thread will help somebody else.
Thank you for trying to help.
misterhoney said:
Learned something yesterday!
Not all cell phones can prevent the insertion of the SIM card the wrong way!
On the Ray you can insert the card the wrong way and you will be able to install the battery and cover perfectly. I have re-inserted the SIM card in the right position and the "No SIM card" message disappeared and was able to unlock it with the same previous code. All is now fine.
I don't mind looking like a foul and hope this thread will help somebody else.
Thank you for trying to help.
Click to expand...
Click to collapse
You inserted the SIM card in the wrong position? How is that even possible?
Someguyfromhell said:
You inserted the SIM card in the wrong position? How is that even possible?
Click to expand...
Click to collapse
Believe it or not
WELL I KNOW I DID A HUGE MISTAKE AND I M AN IDIOT AND I HAD TO READ THE INSTRUCTIONS FIRST
i had the "NOT RECOGNIZED SIMLOCK CERTIFICATE" but i tried to unlock my boot loader using the-laser's (x10_bootloader_unlock.exe)
and now i ve lost my signal
when i look for network operator it give me all of them. but it cant connect to my netork operator .sim toolkit is still working
it look like he dont recognize my sim card . WHAT SHOULD I DO
ps : pccompanion dont work
You will need to contact @THE-laser to fix that for you. One price for both unlock sim and bootloader.
are you saying that i should unlock my sim ?
!!!!!!
Relock your bootloader. What tool u use to unlock?
Sent from my Desire HD using xda app-developers app
karimwac said:
WELL I KNOW I DID A HUGE MISTAKE AND I M AN IDIOT AND I HAD TO READ THE INSTRUCTIONS FIRST
i had the "NOT RECOGNIZED SIMLOCK CERTIFICATE" but i tried to unlock my boot loader using the-laser's (x10_bootloader_unlock.exe)
and now i ve lost my signal
when i look for network operator it give me all of them. but it cant connect to my netork operator .sim toolkit is still working
it look like he dont recognize my sim card . WHAT SHOULD I DO
ps : pccompanion dont work
Click to expand...
Click to collapse
Wow..... That was a mistake. But however, you should lock your bootloader back, Another thing you can try, BEFORE you search for a way to lock your bootloader is making sure your phone is actually "Unlocked" Sometimes you run a risk when you unlock your bootloader that your phone "Re-Locks" Witch sucks, and is another complete pain in the butt battle. But its the price you pay for not paying complete attention to whats going on. Go through them steps and get back to me.
saying tyvocc
And how to relock it ? can i have a tuto or something ?
i tryed with setools it says : nothing to restore
I have x10i and i have done the bootloader unlock with flashtool, but no matter what sim i put in they can all find networks... but none will allow access to networks no matter what sim. Im from SA and i every time i reboot im asked to insert sim... already have... and on boot please insert simcard and restart. Might i add that i put my wifes vodacom sim in and no luck... i put one of those red voda sims in which is blocked then on boot it is recognised but the sim stops the boot requiring a puk number cause the sim is blocked. But my point is that the sim is noticeably recognised and wont boot the phone further unless puk code inserted. But even so i want the phone open to all networks. I have messed round with s1tool but when it tells me hold control then choose firmware im lost... cause i push control and nada happens. I see there is generic for za and sa and there is a voda sa branded one when i use flashtool to run that. I have used all the sa versions i can see or am aware of... could i be missing something... im using generic world firmware version 2.1 update 1, Kernel 2.6.29, Baseband 2.1.54 and build number 2.1.A.0.435... so what to do?
Sent from S3Terry, Galaxy SIII GTI9300, using 8ta/Telkom Mobile.
How to re-lock a bootloader !!!!!!!
Same problem with me
To re-lock the bootloader you are going to have to download the latest flashtool and use the restore option. In some cases this has helped some people get their network back but in others not.
I am one of the unfortunate ones. I also have an x10i which i have recently aquired from a friend but after upgrading to 2.3.3 it has somehow lost its ability to read any sim card i put in it. There is absolutely no network lock on it at all and i see grey signal bars as if network is there but it never ever registers a sim card and permently stays on emergency calls only.
My phone i do believe was on a contract from t-mobile in germany but if i type *#*#7378423#*#* in to the keypad it quite clearly states that their is no locks on it at all.
I am quite clearly baffled as to why this is happening on an unlocked phone, and if anybody who reads this can help please send me a message
Hi there,
So I followed some tutorials here and managed to unlock the bootloader and install CM9.1 and its respective kernel on my SE LWW. However, even though I am using the same SIM card as before, the phone asks for a network unlock PIN after entering the SIM PIN.
Why does this happen? I'm trying to access the same network as before...
What can I do to fix it?
Thanks!
Edit: Uh, curious... If I tap "dismiss" the phone works and connects to the network. Calls, SMS, everything works. Why does it show the message then?
bockyPT said:
Hi there,
So I followed some tutorials here and managed to unlock the bootloader and install CM9.1 and its respective kernel on my SE LWW. However, even though I am using the same SIM card as before, the phone asks for a network unlock PIN after entering the SIM PIN.
Why does this happen? I'm trying to access the same network as before...
What can I do to fix it?
Thanks!
Edit: Uh, curious... If I tap "dismiss" the phone works and connects to the network. Calls, SMS, everything works. Why does it show the message then?
Click to expand...
Click to collapse
It is a known thing among CM users. This thing has no affect to phone usage whatsoever.