Related
Hi all,
All up until a few days ago, my computer/s cannot recognise my Samsung Galaxy S2. Whenever I connect my phone to my computer, the phone believes I am plugging in the charger.
I have attempted to turn on/off USB debugger, attempted the USB mass storage connection method and also attempted to use Winamp's automount option.
I thought it could have been my cable and I have tried different cables and phones and it seems my phone is the only problematic one.
Before this issue, usb used to connect very easily, even used for my car headunit.
Yesterday I was running the 2.3.6 firmware and recently changed to 4.0.3 and neither allow the usb to be working.
Has anyone encountered this problem and does anyone have a solution for this problem?
nounderscore said:
Hi all,
Yesterday I was running the 2.3.6 firmware and recently changed to 4.0.3 and neither allow the usb to be working.
Has anyone encountered this problem and does anyone have a solution for this problem?
Click to expand...
Click to collapse
Did the USB work on previous firmware if so you have messed up the install revert to older stock rom firmware and test .
jje
It didnt stop working due to a firmware upgrade. It randomly stopped working when I was using 2.3.6 so i thought maybe upgrading would do the trick, which it did not.
Try doing a factory reset..
Yeah, did a factory reset when I changed from 2.3.6 to 4.0.3 and just tried again. No difference.
I did notice that this error may have occurred when I may have dropped the phone. Not too sure how this would affect anything but just putting it out there.
Did you drop it with the usb connected?
Sounds like its a hardware problem, just try flashing stock again to be 100%
Sent from my GT-I9100 using XDA App
Dropped whilst drunk unconnected to anything, did have a case on it however.
nounderscore said:
It didnt stop working due to a firmware upgrade. It randomly stopped working when I was using 2.3.6 so i thought maybe upgrading would do the trick, which it did not.
Click to expand...
Click to collapse
ICS is not an upgrade its an unstable beta rom not passed by Samsung for use .
Possible dirty USB ports .
jje
How would one proceed with cleaning the usb ports?
In the past I happened to have trouble connecting with the usb port and I solved unistalling and reinstalling Kies. Have you already tried?
I believe what I'm attempting to do is to even use the phone as a mass storage device. I used to be able to do this via straight windows to any computer and even my car headunit. However at the moment a cable is only recognised as a power source and not as a data connection.
http://forum.xda-developers.com/showthread.php?t=438400
just gave this a go, going to leave it overnight to dry. wish me luck
No luck but I have concluded that the USB port possibly could be broken. I'm wondering, does rooting the phone void warranty?
Unfortunatelly it does...
Wipe everything U can, flash back original firmware and do reset with factory JIG... Than U have chance to claim warranty. But its not 100%...
There is thred about reverting somewhere...
Sent from my GT-I9100 using XDA App
Try again but after restarting ur computer !
Does the computer see any external drives (whether you can connect to them or not)?
Does the computer make a noise when you connect or disconnect the phone?
Hi,
I am a moderately experienced owner of S2 which has the following details
from *#1234#
PDA:I9100XWKF3
PHONE : I9100DDKE4
CSC: I9100ODDKF3
Country:India
from about phone(in settings)
Model # : GT - I9100
Android Version: 2.3.3
Baseband Version : I9100DDKE4
Kernel Version : 2.6.35.7-I9100XWKF3-CL276555 [email protected]#2
Build number : GINGERBREAD.XWKF3
I heard there was a KIES firmware update for my phone and so wanted to update. I installed KIES into my laptop and when I fired it up it notified of a KIES software update(update of KIES itself) and after updating KIES,I connected my phone which was detected properly.
I did the firmware update subsequently and after that the problem started. When I connect my phone using USB to the laptop, nothing happens, the phone doesnt charge even. Everything else works fine. I searched various forum posts but none of them work
1. Tick/Untick the USB debugging checkbox at Settings>Applications>Development - did not work
2. type *#7284#, toggle PDA <-> MODEM. didnt work
3. One curious thing is that, if I connect the phone after the phone is fully booted, it is not detected and the phone doesnt charge at all. But if connect the phone when it is switched OFF and then Switch it on, the phone does charge but still is not detected.
4. The cable is not faulty as it works perfectly with other samsung phones(Fit etc...).Also, its not the problem with my laptop as other mobiles are detected fine on my laptop.
pls help
Couple of things to try
1 Check the pins of the bottom of the phone?
2 Uninstall Kies and drivers, and reinstall?
The pins seems to be fine, anything specific I should look for?..and I have tried connecting in other systems with KIES and still the same problem. My friend's android phones connect fine in all the systems. Even if it was KIES drivers problems, shudnt it atleast charge the cell??
Rule one is use official Samsung USB cable
Rule two is use a mainboard USB Port .
jje
Hmm, It is a official samsung cable.
I did not understand what u meant by mainboard port?? I am not using any hub if that whats you meant. I am thinking it is an issue because of the firmware update.
I was actually thinking of getting the firmware update and subsequently, after backing up using clockworkmod, I was thinking if getting either villianROM or revolutionROM. Now, backing up is out of question as the present firmware is broken. So, If I go ahead with the flashing, what options do I have if I want it to get to factory state for warranty purposes.
Connecting the AC charger when phone is switched on, will initiate charging?
Sent from my GT-I9100 using Tapatalk
yes. Normal charging happens fine. So its not the pins I guess.
gradientt said:
yes. Normal charging happens fine. So its not the pins I guess.
Click to expand...
Click to collapse
How about a factory reset? Try that!
sorry, should have mentioned that. I did factory reset twice and then went into recovery mode and did a wipe and clean and cleaned the cache too.
So, alternatively where can I get the stock rom/firmware for the specs i provided above. I found a thread where various firmware were provided but one compatible with my kernel..csc etc,, was not there
I appreciate u all replying. I tried on the indian thread but nobody seems to feel it worth replying.
Mainboard or motherboards USB port only .
jje
gradientt said:
sorry, should have mentioned that. I did factory reset twice and then went into recovery mode and did a wipe and clean and cleaned the cache too.
So, alternatively where can I get the stock rom/firmware for the specs i provided above. I found a thread where various firmware were provided but one compatible with my kernel..csc etc,, was not there
I appreciate u all replying. I tried on the indian thread but nobody seems to feel it worth replying.
Click to expand...
Click to collapse
http://www.sammobile.com/firmware/
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
KevandLynds said:
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Not actually true. It just needs to be a working micro USB cable. I use a generic micro USB cable (originally for a BlackBerry, I think) for all my flashing. Works fine.
this doesnt work guys, iv tried 3 different usb cables. nothing is happening it just wont connect. is it a way of installing a usb driver for my phone so it will reckonise my phone??
please help some one need help
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
blackgf said:
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
Click to expand...
Click to collapse
Yes i tried all that with no luck i just cant get my phone connected to my laptoo if i could I
could unbrick
Check for Windoze updates if you're unable to get your PC & phone to recognise each other after trying the obvious (different USB ports, different cables, different versions of Odin, making sure Kies/its processes aren't running in Task Manager on PC. Try *all* of these).
This has solved the issue for a few people over the last week or so. Failing that, uninstall Kies from your PC, reboot, redownload it, reinstall it, reboot & try again.
If that doesn't work, try a different PC.
Bratcher123 said:
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
Click to expand...
Click to collapse
This method not required to connect your mobile to PC.
Just need external sdcard and ics based recovery
If you are ics recovery version , we can come from this issue.
1, download any ics ROM ( stock based ) and copy to your external sdcard.
2, root the mobile using this way
http://forum.xda-developers.com/showthread.php?t=1501719
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel
3, as per the above guide once you flashed cwm.zip , you will get cwm based recovery screen.
4, wipe system and cache
5, install the custom ROM from external sdcard
I believe this method will work for you.
All the best
Sent from my GT-I9100 using XDA
sendhiloo7 said:
I believe this method will work for you.
Click to expand...
Click to collapse
I believe it won't since he bricked his device and can't even start the phone.
Do what MistahBungle said + make sure that you install Kies first so that you have the proper drivers for Odin.
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
That's nice.
Now have you tried the other suggestions that have been made ? If your phone & PC can't/won't recognise each other, you need to fix that first. Forget about CW not working. It's not relevant. You're not going to fix this without an Odin flash and making that happen should be your focus/priority.
Bratcher123 said:
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
Click to expand...
Click to collapse
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Might be. Try the (many) suggestions on the first page. Any one of those could be/resolve the problem. In addition to those suggestions, you can also try uninstalling Kies on your PC, rebooting, re-downloading it, reinstalling it, rebooting & then seeing if your PC & phone recognise each other.
But definitely try those other suggestions first.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
trell959 said:
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
Click to expand...
Click to collapse
I use Siyah, and have no such problems.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
grungysquash said:
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
Click to expand...
Click to collapse
That doesnt help as Odin doesnt recognise the phone in Download mode.
crunchie-uk said:
That doesnt help as Odin doesnt recognise the phone in Download mode.
Click to expand...
Click to collapse
+1 10char.....
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
AntAust1513 said:
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
Well I thought of that, but none of us can get into recovery at all.
Sent from my SGH-I897 using XDA
Ok ,so heres my problem:
My S3 (i9300) wont connect to my computer which is running windows 7. I plug it in, and there is no sound for a device connected, no confirmation, and all the gs3 does is charge. it doesnt even show the little usb symbol at the top on the status bar. i've also tried two different cables, two computers, and ive cleaned the usb port on the phone.
This is all pretty recent as well. it used to connect fine on stock and the same on cm9, but one day when i plugged it in, it said unrecognized device, and from then on, the computer doesnt even know its connected anymore. i restored back to my original stock backup that had worked fine before, but still no progress. Kies has been uninstalled and reinstalled multiple times and so have the drivers for samsung phones..
Download, extract and install, then try again
Sent from my GT-I9300 using xda premium
---------- Post added at 03:07 PM ---------- Previous post was at 03:06 PM ----------
http://db.tt/TSzlg0lI
Sent from my GT-I9300 using xda premium
Nope, no luck
Sent from my GT-I9300 using xda app-developers app
Does anyone else have any input or ideas? I'd really like to solve this...
Sent from my GT-I9300 using xda app-developers app
SPLucas26 said:
Does anyone else have any input or ideas? I'd really like to solve this...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
going to be a driver issue if it charges, install KIES first as that provides the necessary samsung drivers too. If this doesnt work then uninstall the USB controller you phone is connected to, unplug the phone and reboot. Leave the phone out and install KIES again.The try again.
Could be your cable too though, have you swap tested anything yet, does a different cable work or does the cable work ok in another PC?
da.trute said:
going to be a driver issue if it charges, install KIES first as that provides the necessary samsung drivers too. If this doesnt work then uninstall the USB controller you phone is connected to, unplug the phone and reboot. Leave the phone out and install KIES again.The try again.
Could be your cable too though, have you swap tested anything yet, does a different cable work or does the cable work ok in another PC?
Click to expand...
Click to collapse
I'm reinstalling KIES right now and ill try it with two different usb cables. If neither work, then ill try uninstalling the usb controller as you said and then go through the process once more. ill get back to you on it all when I'm done.
I have a few no-brand, cheap microUSB cables that allow only for charging the phones: they don't let me get a data connection between the phone (or whatever) and the PC.
Other USB cables work ok, so I know the problem is not with the phone.
You don't need (and shouldn't) install KIES only because of the drivers.
The only drivers you should install from the only trusted source are these:
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
I had the same problem.
I tried EVERYTHING. I did tons of research and tried them all, nothing worked.
I fixed my problem by sending my phone in and getting it fixed. I think they replaced the hardware.
Your phone is likely having a hardware issue, get it sent in, this is the only way.
Simonetti2011 said:
I have a few no-brand, cheap microUSB cables that allow only for charging the phones: they don't let me get a data connection between the phone (or whatever) and the PC.
Other USB cables work ok, so I know the problem is not with the phone.
You don't need (and shouldn't) install KIES only because of the drivers.
The only drivers you should install from the only trusted source are these:
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
Click to expand...
Click to collapse
since this option is really quick to try, ill do that right now.
As for the cable I'm using, the one that I've been trying the most is the one that would work before i started having these issues. The other cable that i have is the one that came with my phone.
leeznon said:
I had the same problem.
I tried EVERYTHING. I did tons of research and tried them all, nothing worked.
I fixed my problem by sending my phone in and getting it fixed. I think they replaced the hardware.
Your phone is likely having a hardware issue, get it sent in, this is the only way.
Click to expand...
Click to collapse
The only problems with that are: 1) My phone is rooted and 2) That might take a while... what im bascially trying to do now is get it to work with my pc so that i have the possibility of unrooting and putting my music on it directly through the cable, rather than removing my microsd and having to put that into an sd adapter.
I'm having the same issue with my AT&T version. I have CM10 installed. I flash back to stock via Odin and I can get it to work, but as soon as I flash back to CM10 after rooting it won't connect.
mmurphmsu said:
I'm having the same issue with my AT&T version. I have CM10 installed. I flash back to stock via Odin and I can get it to work, but as soon as I flash back to CM10 after rooting it won't connect.
Click to expand...
Click to collapse
Did you flash back to the stock that the phone came with? I'm currently on a nandroid backup of my stock software that's rooted and I know as a fact did work at one point in time, but for some reason just refuses to connect to my pc.
SPLucas26 said:
Did you flash back to the stock that the phone came with? I'm currently on a nandroid backup of my stock software that's rooted and I know as a fact did work at one point in time, but for some reason just refuses to connect to my pc.
Click to expand...
Click to collapse
No I am flashing to a stock rooted touchwiz and I can connect to my phone when its done. When it reboots it goes into a loop so I have to reboot it and wipe data/factory reset, then reboot. When it comes back on it still won't connect, so then I reflash stock root again using Odin and it comes back with USB connection working. I think some files are getting corrupt on the phone when flashing to CM10.
I had the same problem before, I used a different charger and it worked.. idk what it was
Well right now I am on Stock TW that is rooted and I can get into my phone via Windows Explorer. But if I was to put Clock work Mod back on it seems to not want to connect anymore. So it seems CWM is doing something weird.
I'm gonna install TWRP instead of CWM and see if that makes a difference.
mmurphmsu said:
No I am flashing to a stock rooted touchwiz and I can connect to my phone when its done. When it reboots it goes into a loop so I have to reboot it and wipe data/factory reset, then reboot. When it comes back on it still won't connect, so then I reflash stock root again using Odin and it comes back with USB connection working. I think some files are getting corrupt on the phone when flashing to CM10.
Click to expand...
Click to collapse
I think that this could be what's happening. When I restore to my rooted touchwiz, all I do is restore and that's it. Could you explain exactly what you do to get it working again? I'm a bit of a noob so I just need it explained a little simpler.
SPLucas26 said:
I think that this could be what's happening. When I restore to my rooted touchwiz, all I do is restore and that's it. Could you explain exactly what you do to get it working again? I'm a bit of a noob so I just need it explained a little simpler.
Click to expand...
Click to collapse
Look for the rooted image for your phone for stock. Put your phone in download mode and use Odin to reflash it back to stock not a restore. Use this site for help: http://galaxys3root.com/category/galaxy-s3-unroot/
Its worked for me every time. You may have to flash it twice with Odin to get it to work, that's what I usually have to do.
mmurphmsu said:
Look for the rooted image for your phone for stock. Put your phone in download mode and use Odin to reflash it back to stock not a restore. Use this site for help: http://galaxys3root.com/category/galaxy-s3-unroot/
Its worked for me every time. You may have to flash it twice with Odin to get it to work, that's what I usually have to do.
Click to expand...
Click to collapse
My issue ended up being an app I had installed, Triangle Away. I uninstalled and rebooted and had my USB connection back.
Well, so far, all I've gotten it a "usb cable connected" notification when trying yet another cable. Although i got this notfication, i still couldnt see any of the files on it from my pc, so it basically wasn't really connected. Im not sure what to do from here.
My ultimate goal would be to be able to unroot it so that if i needed to send it in or whatever, then i could without worry. As a side question, is there anyway to unroot it without a pc?
how i want to fix this matter ? help me guys. " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. " my screen S2 appear this. all time. i cant go anywhere. when i unplug usb cable it blank. cant on. after i plug in usb cable, it appear this. pc cant recognize this driver " OMAP4430 ". im death. please help me.
What have you done dude
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kind of help plss.
llrzall said:
kind of help plss.
Click to expand...
Click to collapse
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kunterk said:
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
llrzall said:
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
Click to expand...
Click to collapse
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Make sure you are flashing the right ROM for your device.........
kunterk said:
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
A similar kind of thing happened to my phone as well when I was upgrading to 4.0.4 from gingerbread via Kies. The installation got stuck when the phone was in the download mode and I had no other option than to disconnect. But yours got stuck while using Odin. I would suggest you to flash the firmware again. I hope your phone goes into download mode now. As for the drivers, uninstall everything related to samsung from your PC and then reinstall it. DO NOT UPGRADE SAMSUNG KIES IF IT ASKS YOU TO DO SO! AS I TOLD YOU A SIMILAR THING HAPPENED TO MY PHONE. MY PC COULD'NT RECOGNIZE IT AND I REINSTALLED EVEYTHING AND IT FINALLY SHOWED SOME SIGN. MAKE SURE YOUR ANTIVIRUS IS FULLY DEACTIVATED WHILE YOU EXECUTE THE FLASHING OPERATION!
leech4 said:
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
Click to expand...
Click to collapse
make senses. but genuine won't make any different, all micro usb cable are the same. i'm using my old Nokia micro usb cable now, and just works fine
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
first of all, while your phone is disconnected from USB cable, can you enter download mode?if no, then try to find someone that have JIG. else, as leech4 said, this might caused by your USB cable. OR might caused by your USB port of your PC. as i said earlier, try to repair your USB driver (not sammy USB driver, but your PC's usb driver). flash using ODIN, and kill kies services from task manager as kies will conflict with ODIN later. here i give you LSJ link(thanks to ApriliaM3) in case you don't have. extract the zip and use all the PDA, PHONE and CSC file. you can even use PIT to re-partition your system. (tested and proven to be working). good luck mate.:good:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
TheATHEiST said:
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
Click to expand...
Click to collapse
LOL. its ur phone? no rite. learn from mistake, make me perfect next time.
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Wow, I suspect this kind of brick or what so ever others called it. I've read some where, and they talking about JIG. If what they mean is the same like what I understood from my electronic knowledge, then you have to find someone that have JIG to do further troubleshooting directly from your board, not via usb. Well, I'm just saying. You might want to seek for other solution first since it's your device.
Cheers
Sent from my GT-I9100 using xda app-developers app