My nook's touch screen is unresponsive at the left corner bottom (area near the n-hole)
Does anybody have the same one?
I attached the image below
All of the comment are welcome.
Sent from my Nexus 7 using Tapatalk 2
I too have a similar problem except my dead zone is in the upper left.
I wonder if we have a way to recover it to normal?
Sent from my Nexus 7 using Tapatalk 2
Same problem here, I've got it just after flashing to the SGT7 version 12/9, Tried to flash back others version like SGT7 24/11 or event CM7 beta, but the problem still remains.
Have you guys found out the way to solve this? Any help will be greatly appreciated
Edit: I think we got the problem after using the 10 mutil-touched flash app. But I have flashed back to stock 2 touch driver but nothing changed.I think I shoud try again.
http://forum.xda-developers.com/showthread.php?t=2030322
I've flashed pretty much every ROM that has been released, and I really don't believe it is caused from a certain ROM. I have found in messing with several NTs and NCs that the screen will randomly have dead areas. A few times I have seen it get worse over time. It seems to happen more on NCs and is a known problem with them. Maybe revert to stock ROM and see if it still happens. If so, try to get B&N to replace it.
Sent from my NT running Kuzma's CM10.1
hado0601 said:
Same problem here, I've got it just after flashing to the SGT7 version 12/9, Tried to flash back others version like SGT7 24/11 or event CM7 beta, but the problem still remains.
Have you guys found out the way to solve this? Any help will be greatly appreciated
Edit: I think we got the problem after using the 10 mutil-touched flash app. But I have flashed back to stock 2 touch driver but nothing changed.I think I shoud try again.
http://forum.xda-developers.com/showthread.php?t=2030322
Click to expand...
Click to collapse
What is the version of your nook? 8 or 16GB. Mine is 8GB and I knew another one have the same version with the same problem like me
Sad the I am outside the US and no way to send nook back to B&N...
Sent from my Nexus 7 using Tapatalk 2
Isn't there someway to recalibrate the touch screen? One would think this would be a must have developer app or for peeps who are switching back and forth between 2,5,10, point touch and touch area resolution?
Onageric said:
Isn't there someway to recalibrate the touch screen? One would think this would be a must have developer app or for peeps who are switching back and forth between 2,5,10, point touch and touch area resolution?
Click to expand...
Click to collapse
There is a nook recalibration app in the play store. Don't know if it actually does anything, but it is there.
goldwoods said:
My nook's touch screen is unresponsive at the left corner bottom (area near the n-hole)
Does anybody have the same one?
I attached the image below
All of the comment are welcome.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
My Nook Tablet got the same problem like yours but the dead zone at top left corner.
Same issue here
Anyone... please help us.. I'm also having same problem.. except for the dead zone on my screen is at both places(top and bottom when held veritcally)
Related
Anyone have an issue with their touchscreen where there is a "dead spot"? I don't know how to describe it other than that. There is a spot if I touch it, nothing happens. It is right where the Accept and Download button is on the market in portrait orientation. It seems to be all the way across the screen in a horizontal line. Pixels and color are not affected just the touch effect. If i reboot, it goes away for a while. Switching ROMs makes no difference, happens on every one I have tried though, so it seems to be a hardware issue. Any help would be great.
nicktheqwik82 said:
Anyone have an issue with their touchscreen where there is a "dead spot"? I don't know how to describe it other than that. There is a spot if I touch it, nothing happens. It is right where the Accept and Download button is on the market in portrait orientation. It seems to be all the way across the screen in a horizontal line. Pixels and color are not affected just the touch effect. If i reboot, it goes away for a while. Switching ROMs makes no difference, happens on every one I have tried though, so it seems to be a hardware issue. Any help would be great.
Click to expand...
Click to collapse
If you had searched the forums, you would have come across this, which will solve your problem.
Also, it's not flashable so unzip it and put the apk on your phone, install it, then run.
nicktheqwik82 said:
Anyone have an issue with their touchscreen where there is a "dead spot"? I don't know how to describe it other than that. There is a spot if I touch it, nothing happens. It is right where the Accept and Download button is on the market in portrait orientation. It seems to be all the way across the screen in a horizontal line. Pixels and color are not affected just the touch effect. If i reboot, it goes away for a while. Switching ROMs makes no difference, happens on every one I have tried though, so it seems to be a hardware issue. Any help would be great.
Click to expand...
Click to collapse
Try to find the HTC Calibrate.apk and push it to System/Apps... It'll Definitely Help!
Twolazyg said:
If you had searched the forums, you would have come across this, which will solve your problem.
Also, it's not flashable so unzip it and put the apk on your phone, install it, then run.
Click to expand...
Click to collapse
I ran the advanced search and couldn't find anything for the E3D. But thanks for the help and for the hand-slap dude.
nicktheqwik82 said:
I ran the advanced search and couldn't find anything for the E3D. But thanks for the help and for the hand-slap dude.
Click to expand...
Click to collapse
Really? After about 1.4 seconds I had 4 touchscreen issue threads (including this one.) pop up after searching "touchscreen issue" in the "search this forum" bar. Did you fix your problem?
No go.
Well the HTC Calibrate app did not work. I must say that it did help for sure, but the same dead spot issue keeps happening. OK, so now I have begun to look at replacement parts on Ebay. So just to get this straight, it is the digitizer/front glass assembly that registers touch, correct? As I said, there are no missing pixels or colors, so does that rule out the LCD? Or should I but both to be on the safe side? I really want this issue done and over with, so help me get this thing taken care of guys. Thanks to all you guys for the help. Also, if anyone has a digitizer and LCD assembly for a good price, let me know.
I had the same issue where the bottom quarter of my e3d hboot 1.5 didn't work I didn't have insurance so I took it in and the sprint manager said I wasnt the only one with the issue it's a htc issue I tried the calibration on different roms bit it would only give you calibration on the top half of the screen, spent swapped it out and I got a new e3d with hboot 1.5 of course but at least the touch screen is working.....hoped that helped you out cuz I searched everywhere and couldn't find a solution.
I was toying with that idea. Will the "watermark" from unlocking a 1.50 hboot version be a problem? Obviously I need to unroot. And also, I bought this phone from an individual just a few weeks ago after I got my first one stolen, will this be a problem? Any other thoughts on taking it back to sprint?
Yeah, it is really weird, it is exactly where the "Accept & Download" button is when making a market purchase. So, yeah it sucks, I have to rotate it horizontal every time I want to buy something
I have been having lots of touchscreen issues as well. Tried lots of different roms and kernels but no luck. Someone suggested formatting the SD card. I haven't had access to a computer so i just removed the card about an hour ago to test and so far i haven't had any issues.
Sent from my PG86100 using xda premium
A day or so after upgrading to Jokersax's 0.5.0 build for the Atrix with the Aroma installer, I've discovered that some of the letters on on the keyboard stopped working. Using Touch Test, I've confirmed that there is a roughly 1 inch vertical stripe of my touch pad that just does not register inputs.
Downgrading to previous builds or restoring previous backups of the ROM do not fix the issue.
Is there a chance that the touchpad calibration utility for Aroma caused a miscalibration of the touchpad? Or is this likely physical damage of some sort? I've already tried rerunning through the Aroma installer and recalibrating the touchpad to no good effect.
Any other suggestions from folks?
-----
Update: Solved by replacing the screen/digitizer
mines is doing the same exact thing. from what i have read on there your digitizer is going out. I ordered another one and it should be here today, once I install it, I will let you know if it continues to do this or not.
The digitizer is a common issue with the Atrix. Motorola went cheap on the Atrix.
Funny. I also started experiencing this last week.
How much did your digitizer cost? ( @ Quinto)
Sent from my MB860 using XDA
I just installed JokerSax 0.5.0 2 days ago as well, and today I have noticed a strip up the entire touch screen that is not responding to input. I too used Touch Test to confirm that there is a strip from the back key, all the way up to between 'OROL' in the word Motorola at the top of the phone.
This affects keys B H and Y when in portrait, and the entire qwerty row when in landscape with the usb port to the top.
I dont recall this happening before running Jokersax CM9 but it very well could have been..
shirzadians said:
Funny. I also started experiencing this last week.
How much did your digitizer cost? ( @ Quinto)
Sent from my MB860 using XDA
Click to expand...
Click to collapse
got for $33 off of eBay. Here is the link:
http://www.ebay.com/itm/OEM-Motoroloa-Atrix-4G-MB860-digitzer-frame-/251030640695?pt=LH_DefaultDomain_0&hash=item3a72979837#ht_5015wt_754
It came yesterday and I am going to attempt to put it on tonight.
Thanks, and good luck. Keep us posted.
Sent from my MB860 using XDA
Somebody gave me a stock atrix with a similar condition, it was about 1/2 inch at the top and another 1/2 inch near the bottom (in portrait) mode.....so it's not the rom that you installed.
I too ordered a new digitizer off ebay....except mine cost $43 :-( i should have looked for a little longer...ohh well
I don't think it's necessarily a hardware issue :
The fact that it happened just after installing a new ROM is very disturbing
I have the same problem, and sometimes, with a new ROM, the problem disappears for a couple of hours, then my screen goes totally crazy, then the unresponsive strip reappears
Some people have this problem and a new digitizer didn't solve it
Is there any way that CM9-based ROMs overwrites some touchpad driver ? Does someone else could testify that it could be something else that the digitizer ?
Interesting idea. For the record though, I'm running pure CM7 RC 2. I have heard that the reason one might lose and then regain touch response is due to a hardwear connection/reconnection issue.
When this problem first began to occur, I would briefly retain touch response in the dead strip after rebooting. To test if this was a software or hardwear issue, I physically twisted my phone a few times and regained touch response temporarily, suggesting a hardwear response.
Just my two cents.
Sent from my MB860 using XDA
Anyone have luck with the replaced digitizer yet? I'm hoping to avoid ordering if that doesn't resolve the issue.
Ok, I broke down and bought the digitizer from ebay via the link that quinto0827 provided. I just installed it, and things are working great.
shirzadians said:
Interesting idea. For the record though, I'm running pure CM7 RC 2.
Click to expand...
Click to collapse
Off topic, where did you find cm7 rc2? All I'm finding is rc1 which is what I'm running.
David Guillot said:
I don't think it's necessarily a hardware issue :
The fact that it happened just after installing a new ROM is very disturbing
I have the same problem, and sometimes, with a new ROM, the problem disappears for a couple of hours, then my screen goes totally crazy, then the unresponsive strip reappears
Some people have this problem and a new digitizer didn't solve it
Is there any way that CM9-based ROMs overwrites some touchpad driver ? Does someone else could testify that it could be something else that the digitizer ?
Click to expand...
Click to collapse
I think the same thing.
I had the same problem with my Huawei Ideos U8150 after flashing Dronix 0.5 Rom.
In CWM I can see that the digitizer every 2 seconds it loose my fingers.
same has happened to me on my atrix. one perfectly straight line down the screen which doesnt react to touch. This line is moveable within the aroma installer calibration tool, which btw is what created the problem for me in the first place, after i decided to try the alternate touch option.. So yup, i agree too. I KNOW it was aroma installer that messed my atrix up.. SIGH...And i had just gotten it running top notch too..grrr .. btw that new touch file manager installed through cwm will also move this ghost line around, which could perhaps help some users navigate a little better on their touchscreen.. This is another point that suggests its not a hardware issue. Only other, worse thing i can think of is that the aroma touch installer played with the voltages feeding the screen, and did maybe blow something physically.....
Hey look at this... Just happened today and im so sad... Sometimes this solution in the link seems to work so it should be a hardware issue... http://forum.xda-developers.com/showpost.php?p=27595402&postcount=1
My wife's P7510 has started to act up. The touchscreen is jumpy. When i go into the development options and use the pointer coordinates option, my finger registers as two,sometimes three. It makes it difficult to type, and just hard to use. Do i have a hardware issue or is it something I can easily fix?
nygmam said:
My wife's P7510 has started to act up. The touchscreen is jumpy. When i go into the development options and use the pointer coordinates option, my finger registers as two,sometimes three. It makes it difficult to type, and just hard to use. Do i have a hardware issue or is it something I can easily fix?
Click to expand...
Click to collapse
Did you flash another ROM?
if stock: there is maybe moisture or dust, take apart as much as possible and hoover round the edges,If the touch screen is still not working, the tab is broken as the majority if touch screen phones and tabs cannot be calibrated
The tablet is still under warranty, so I don't want to dissemble. It had rooted stock OS on it, ICS. I flashed the stock rom back, and still have the issue. Did a Factory reset, and still have the issue. I am in the process of draining the battery to see if that helps. But I was hoping someone may have had this happen before, and can shed some light on my problem.
well, if you still got a warranty claim it then
Sent from my GT-P7500 using xda premium
Try using the touchscreen tune app (requires root).
This will allow you to modify screen sensitivity and test.
If you have the warranty..backup your data and claim a new one.
Sent from my SCH-I905 using xda app-developers app
Serpentene said:
Try using the touchscreen tune app (requires root).
This will allow you to modify screen sensitivity and test.
If you have the warranty..backup your data and claim a new one.
Sent from my SCH-I905 using xda app-developers app
Click to expand...
Click to collapse
I don,'t think this app will work as this looks like a hardware issue after flashing another ROM, maybe you can check the all forum-searcher and check if anyone else has this issue too.
I'd suggest to send it back and claim a new tablet as well!
sometimes upper part of my sola does not responds and it is an temporary problem
whenver this touch problem occurs
I clesn the screen with cloth and it works fine.
can anyone have solution for this problem?
and hardware of the phone is not the problem I think.
screen shot for touch screen service test..
Sola
shailen007 said:
sometimes upper part of my sola does not responds and it is an temporary problem
whenver this touch problem occurs
I clesn the screen with cloth and it works fine.
can anyone have solution for this problem?
and hardware of the phone is not the problem I think.
screen shot for touch screen service test..
Click to expand...
Click to collapse
Me too i have the same problem but mine is the lower part near at the delete icon for keyboard. Please help. I installed swiftkey3 but still. sometimes it responds sometimes it dont.
AllanCaladiao said:
Me too i have the same problem but mine is the lower part near at the delete icon for keyboard. Please help. I installed swiftkey3 but still. sometimes it responds sometimes it dont.
Click to expand...
Click to collapse
I had the same problem with ICS, but i downgrade to GB. First I did the "sunbath", and works, but some apps started to crush. So I decided to go back to GB. Until now, it works flawless. I lose a couple of functions, but it's better than the "sunbath".
UPDATE1: After a couple of weeks the problem came back. Anybody, got a solution other than throw to the garbage the phone?
UPDATE2: Well, I really don't know what makes appears the touch screen problem again, but since I install GB, I got only once that the screen didn´t work and only for a short time. I've been using for a couple of days and I didn't have any trouble at all. I'm guessing that is like a bug software problem, but if someone find a final solution, please post it.
Hey!
Hey guys. I also have the same problem. My service test in touch screen was so terrible. Also behind delete button in keyboard. Lower part right side of the screen. What shall we do?
Additions.
Haha. I forgot the attchmnts
same problem
Same Problem here to.
Anyone know something about this problem?
Anybody got a workaround?
Thanks
Another one with the same problem, mine in the low right side of the screen. Im using the glove mode otherwise its impossible to use it. Somebody with JB, which disables glove mode, has resolve the problem??Im asking this because while its not responding, I restart the phone an enter CWM, and there, its responses perfectly.
So, somebody with this problem, has flashed the any port of JB and resolve this issue??
ok, I´ve tested with JB and it became more responsive but also having the problem.
I left the phone with direct sunligth and now it is ok WTF!!??
have you tried calibrating it? there's an app at the play store if i'm not mistaken..
I have tried everything but 1 thing worked. Sunbathing your sola will recalibrate touchscrren. I dont know how it work but it sure does the job. I'm afraid i have to sell my phone cause i dont want any problems. Now i'm using galaxy s3 mini
Sent from my GT-I8190 using Tapatalk 2
SunBathing Works!!!
Hi, Sunbathing really works as a last effort for Xperia Sola
It fixed mine and the time needed for your phone under the sun is approx..1 hour
Dont worry about the battery
First, sorry for my bad English!
My V10 H901V20L now the sencond sreen turns off with the main screen too. Means when I turned off the main screen, the second screen went off too, and I can't do anyting with the second screen too. I have tried so many ways ( like turn OFF and ON again both in Settings > Display > Second Screen, flash many differentce roms after 4wipes) and it doesn't work.
I have searched in forum but seem like noone have a solution for this issue.
So can anyone help me!
I have followed this thread and enter "signboardtest", but seem like its not a solution for me.
https://forum.xda-developers.com/lg-...uired-t3253752
And I have tested my proximity sensor, it works nomarly. So I can't find out what is the problems with my V10.
Settings > Display > Second Screen > Turn ON Both Options
Double0EK said:
Settings > Display > Second Screen > Turn ON Both Options
Click to expand...
Click to collapse
Yes, I have tried turn both off and on again. But I didn't work.
You can flash tot
China user
andy_zhang said:
You can flash tot
China user
Click to expand...
Click to collapse
Yes, for sure, I had tried with stock rom .TOT, but it doesn't work too.
update : I had updated KDZ V20J and V20L thru LGUP but it didn't work too. Can anybody help me pls!!
Anybody have any ideals about build.prop. Did this file control the second screen?
Can anyone tell me that is the problem with the hardware or solfware pls!!
Looks like a hardware issue, might want to replace that screen
Sent from my LG-H901 using Tapatalk
luisoman2000 said:
Looks like a hardware issue, might want to replace that screen
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
Can you expland me more. Cause the sencond screen works perfectly when the main screen ons.
You already tried wiping and several roms, so it is definitely not a software issue. If it was software the screen would have worked with at least 1 of the roms you tried.
Sent from my LG-H901 using Tapatalk
luisoman2000 said:
You already tried wiping and several roms, so it is definitely not a software issue. If it was software the screen would have worked with at least 1 of the roms you tried.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
You are the men. Cause I still cant believe that is a hardware problem, I had gg for it but seem like no one had the "deepest" problem like me
tuilakhang said:
You are the men. Cause I still cant believe that is a hardware problem, I had gg for it but seem like no one had the "deepest" problem like me
Click to expand...
Click to collapse
Guys HEEEEEEELLLLPPPPP!!!
I have exactly the same problem! Surely someone knows what could cause this? Why does the backlight go off with the main screen??? The display is working, because if you shine light into it, the date/time/notifications are there it's just that the backlight is going off!!!! Surely this is software?
I've factory reset and it made no difference but that doesn't roll back to LP... I just upgraded this phone to the latest software when I bought it so don't know if it had this issue from new.
Sorry to take over the thread, will delete and start a new one if people would prefer.
Don't see how it can be hardware at fault???
Thanks in advance for any help?!
kennish said:
Guys HEEEEEEELLLLPPPPP!!!
I have exactly the same problem! Surely someone knows what could cause this? Why does the backlight go off with the main screen??? The display is working, because if you shine light into it, the date/time/notifications are there it's just that the backlight is going off!!!! Surely this is software?
I've factory reset and it made no difference but that doesn't roll back to LP... I just upgraded this phone to the latest software when I bought it so don't know if it had this issue from new.
Sorry to take over the thread, will delete and start a new one if people would prefer.
Don't see how it can be hardware at fault???
Thanks in advance for any help?!
Click to expand...
Click to collapse
this is what exactly happen to mine. But I had searched for it for months, and didn't have any solution. Only roll back to LP I didn't try.
tuilakhang said:
this is what exactly happen to mine. But I had searched for it for months, and didn't have any solution. Only roll back to LP I didn't try.
Click to expand...
Click to collapse
This is crazy... it's probably something simple to some of the guys on here?. Oh well I'll just see if the seller will accept that it's faulty and send me another one. How did you get sorted or didn't you?
kennish said:
This is crazy... it's probably something simple to some of the guys on here?. Oh well I'll just see if the seller will accept that it's faulty and send me another one. How did you get sorted or didn't you?
Click to expand...
Click to collapse
Unluckily, I got this phone from my friend and it broke after a few time, so I can't send it back to my friend and have to find a solution.
Some say that an harware issues. But I cant get it. The second screen works perfectly with the main screen, but lights out. @@
tuilakhang said:
Unluckily, I got this phone from my friend and it broke after a few time, so I can't send it back to my friend and have to find a solution.
Some say that an harware issues. But I cant get it. The second screen works perfectly with the main screen, but lights out. @@
Click to expand...
Click to collapse
That's bad for you... unlucky.
Can you recall what (if anything) may have caused it to stop working? I'm wondering it mine went bad after LG bridge software update and restore from previous V10 (H961N).
Sent mine back and got another coming this week.. fingers crossed this time. Might update it the same but maybe not restore? or not restore settings at least?
Got my new one. Working fine except it's maybe a tad dimmer compared to my previous V10s second screen. There's definitely variation as it won't go off with my finger over the proximity sensor whereas my brothers one does (this just dims right down). A piece of cardboard or paper shuts it down. But most importantly, it does go off in my pocket... or else the wifi, sound, flashlight etc would be getting switched the whole time.
I solved this problem by checking PINs on mainboard for the second Flex Cable for LCD of LG V10, see the video, READ comments here https://www.youtube.com/watch?v=hpeVAqgU94s, so in my case one of three PINs was folded little, so one PIN contact didn't touch the second Flex Cable and this caused the problem...