Hello everybody,
I just successfully rooted my Galaxy Tab 10.1 Wifi (GT-P7510 model) using stock 4.0.4 ROM, and wanted to put up together all the steps, as they are disseminated through several posts and various broken links in the Galaxy Tab 10.1 Android Development forum.
As I'm not able to write there because of being a noob, I'll post it here, hoping any moderator sees this and moves it to its correct place.
I assume you have a Galaxy Tab 10.1 Wifi device (GT-P7510) with stock Android 4.0.4 ROM installed and working.
Step 1: Downloading relevant files:
From this post, get Odin3 v1.85 and CWM Touch Recovery.
Samsung_Galaxy_Tab_10.1_root.zip file from this post.
Latest version of SuperUser from here. This is needed because SuperUser included in the other zipfile doesn't work well with ICS, as stated in this post.
Step 2: Placing files correctly:
Decompress Odin3 to a folder on your computer.
Copy CWM file (named recovery.tar.md5) to the same folder of Odin3.
Plug the tablet to your computer and copy latest version of SuperUser and file "Samsung_Galaxy_Tab_10.1_root.zip" to device's root folder.
Step 3: Installing custom recovery:
Put your tablet into download mode:
Power off tablet.
Power on holding Power + Vol Down (left part of volume button) buttons.
When Samsung logo appears, release power button, but continue holding Vol Down button.
When two icons appear, push Vol Up button (right part of volume button).
Connect tablet to computer. Wait until drivers are fully configured.
Open Odin3 v1.85.exe (under WinVista/7 admin rights must be granted).
Under ID:COM label a yellow box with a COMX port number must appear. If you encounter problems see below.
Push PDA button and select previously downloaded recovery.tar.md5 file.
Push Start button. If everything went OK tablet should restart automatically. If you encounter problems see below.
Disconnect tablet from computer.
Step 4: Rooting process:
Put your tablet into recovery mode:
Power off tablet.
Power on holding Power + Vol Down (left part of volume button) buttons.
When Samsung logo appears, release power button, but continue holding Vol Down button.
When two icons appear, push Vol Down to select the leftmost option, and then Vol Up button (right part of volume button).
Right now you can switch options wih VolUP and VolDown buttons and select options with power button.
Navigate through "Install zip from sdcard" and "choose zip from sdcard".
Select "Samsung_Galaxy_Tab_10.1_root.zip" file and select "Yes - Install Samsung_Galaxy_Tab_10.1_root.zip" when prompted.
Once the installation ends, repeat procedure with the latest SuperUser build previously downloaded.
Once the installation ends, select "+++++Go Back+++++" and "reboot system now".
Step 5: Enjoy your rooted device! :victory:
This has been tested only with a Spanish Galaxy Tab 10.1 Wifi device (GT-P7510) with stock Android 4.0.4 ROM installed.
Problems encountered:
If you have trouble running Odin, follow these steps:
Disconnect tablet from computer.
Uninstall Samsung Kies.
Reboot computer.
Download root.zip file from this post.
Install "GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe" drivers.
Retry again. Another reboot may be useful.
I want to thank you to all the staff of xda-developers and to all the users whose work I compiled here.
Get in there, root acess is mine! Worked a treat on my GT-P7510 wi-fi only with stock ICS 4.0.4, build number IMM76D.UELPL, just added my tablet details for anybody searching in the future.
Thanks very much, time to play
Ty
TyTyTy.. Just what the doctor ordered. Worked flawlessly. Ty for taking the time to write all that up also.
My root went awry !
Hi
I believe I followed all the directions but something went amiss.
My GT p7510 now will just reboot to find my network and connect, then show the clock and security screen , it will show the current time and accept my security shape --but then the screen stops accepting input. and everything stops.
Seems like running recovery is possible, would a factory reset be advisable?
Thanks
GT p7510 stock ics
Confirmed Root of GT-P7510 with 4.0.4 stock
I just wanted to post a reply to confirm that I was able to use these instructions to perform my first ever root of an android device (GT-P7510 with 4.0.4 android and build number IMM76D-UELPL). Thanks for a great, easy to follow post. :good:
I would also recommend that any users make sure to install the Samsung drivers (GT-p7510_USB_Driver_v1_3_2360_0-Escape) on their PC before starting the instructions as written, as I have read that these drivers are needed as a prerequisite to rooting in other forums.
woot
Great guide i tried others and all the Dl links were broken yours all worked
THANK YOU!
Worked on my GT P7510 United States. I am a noob, I followed your flawless directions and all is well. Thanks for the easy to read and use tutorial!:good:
I'm a noob from Canada, I signed up on this forum just to thank you for this easy to follow guide!
A friend just gave me his old GT-P7510 (aka p4wifi) and I used this guide to root it because it was very clear and detailed. Went perfectly smoothly.
However, the OP is old and points to an older version of CWM. If you intend to flash CM 10.1, you need a newer version of CWM. Take a look at this thread (if you have the wi-fi version):
http://forum.xda-developers.com/showthread.php?t=2296961
From Post #5 I grabbed the flashable version of CWM Touch 6.0.3.1 (P4wifi) and flashed it, then flashed CM 10.1 (8/4 nightly) and everything went super smooth. You guys rock. :good:
Hi,
Some months later i try tu follow your tutorial. Very clear but... i've 2 problems.
With the CWM that you recommend, the recovery mode is unreadable (rolling) > first problem.
So i follow this thread : http://forum.xda-developers.com/showthread.php?t=1555984 it resolves my display problem, i can access to recovery mode.
I continue with step 4 with Samsung_Galaxy_Tab_10.1_root.zip installation in recovery mode but now my device doesn't start, it loops...
Initialy it was in 4.0.4... i think i don't understand anything with the different versions of firmwares and others CWM...
Help will be really appreciate...
Many thanks
Thomas
tominou50 said:
Hi,
Some months later i try tu follow your tutorial. Very clear but... i've 2 problems.
With the CWM that you recommend, the recovery mode is unreadable (rolling) > first problem.
So i follow this thread : http://forum.xda-developers.com/showthread.php?t=1555984 it resolves my display problem, i can access to recovery mode.
I continue with step 4 with Samsung_Galaxy_Tab_10.1_root.zip installation in recovery mode but now my device doesn't start, it loops...
Initialy it was in 4.0.4... i think i don't understand anything with the different versions of firmwares and others CWM...
Help will be really appreciate...
Many thanks
Thomas
Click to expand...
Click to collapse
from stock 4.0.4
install recovery from droidbasement
send over custom rom and gapps
go into recovery and install rom then gapps
reboot and voila
(use odin and stock rom to get back to stock and no more bootloop)
as long as you can get back into recovery/download everything is fixable.
android is like a pc
recovery = bios
custom/stock rom = windows..linux...ect..
wrong root.zip file will give you bootloop your adding wrong files so device can't boot up
hope this helped
btw...you don't need to be rooted to install recovery or custom roms
I'm Rooted!!
Followed instructions to successfully root a Galaxy Tab 10.1 and then installed GSM (cell) call support from AndroidAdvices site.
All went well but I did have to follow the "Problems Encountered' sequence to get Odin3 to run on the Windows desktop.
Really appreciate your help.
Thanks guys.
Does it work for Google IO Tab with ICS 4.0.4 STOCK ROM?
Hi,
Is it work for Google IO tab GT-P7510, i have already upgraded ICS STOCK 4.0.4, Buld IMM76D.UELPL.
Thanks
gcp.test said:
Hi,
Is it work for Google IO tab GT-P7510, i have already upgraded ICS STOCK 4.0.4, Buld IMM76D.UELPL.
Thanks
Click to expand...
Click to collapse
Yes
sent from my still superb Google I/O 7510
Hi! Thanks for your post for the steps of the rooting of Samsung Galaxy Tab 10.1 . I have just a few quick questions.
is it possible to use your rooting guide to flash the latest version of CWM recovery or should I use the specific one you recommended with the link in the guide? In order words, could I flash CWM 6.0.3.0 ( the latest for galaxy tab 10.1) instead of the one you suggested? Just let me know. If you believe the CWM version you suggested in your guide is safer then I will flash the one you suggested instead. Also is it possible to use adb fastboot to turn the tablet into the desired mode? I really have trouble pressing the buttons to get to the different modes. Thank you very much.
Re My Build #
Hi I just looked at my Build # and it's IMM76D.VLLH3 now my questions are
Will this work with my Samsung Galaxy Tab 10.1 GT-P7510.
Will is change the Build #.
Thank you in advance for reply.
BBB
jovimon said:
Hello everybody,
I just successfully rooted my Galaxy Tab 10.1 Wifi (GT-P7510 model) using stock 4.0.4 ROM, and wanted to put up together all the steps, as they are disseminated through several posts and various broken links in the Galaxy Tab 10.1 Android Development forum.
As I'm not able to write there because of being a noob, I'll post it here, hoping any moderator sees this and moves it to its correct place.
I assume you have a Galaxy Tab 10.1 Wifi device (GT-P7510) with stock Android 4.0.4 ROM installed and working.
Step 1: Downloading relevant files:
From this post, get Odin3 v1.85 and CWM Touch Recovery.
Samsung_Galaxy_Tab_10.1_root.zip file from this post.
Latest version of SuperUser from here. This is needed because SuperUser included in the other zipfile doesn't work well with ICS, as stated in this post.
Step 2: Placing files correctly:
Decompress Odin3 to a folder on your computer.
Copy CWM file (named recovery.tar.md5) to the same folder of Odin3.
Plug the tablet to your computer and copy latest version of SuperUser and file "Samsung_Galaxy_Tab_10.1_root.zip" to device's root folder.
Step 3: Installing custom recovery:
Put your tablet into download mode:
Power off tablet.
Power on holding Power + Vol Down (left part of volume button) buttons.
When Samsung logo appears, release power button, but continue holding Vol Down button.
When two icons appear, push Vol Up button (right part of volume button).
Connect tablet to computer. Wait until drivers are fully configured.
Open Odin3 v1.85.exe (under WinVista/7 admin rights must be granted).
Under ID:COM label a yellow box with a COMX port number must appear. If you encounter problems see below.
Push PDA button and select previously downloaded recovery.tar.md5 file.
Push Start button. If everything went OK tablet should restart automatically. If you encounter problems see below.
Disconnect tablet from computer.
Step 4: Rooting process:
Put your tablet into recovery mode:
Power off tablet.
Power on holding Power + Vol Down (left part of volume button) buttons.
When Samsung logo appears, release power button, but continue holding Vol Down button.
When two icons appear, push Vol Down to select the leftmost option, and then Vol Up button (right part of volume button).
Right now you can switch options wih VolUP and VolDown buttons and select options with power button.
Navigate through "Install zip from sdcard" and "choose zip from sdcard".
Select "Samsung_Galaxy_Tab_10.1_root.zip" file and select "Yes - Install Samsung_Galaxy_Tab_10.1_root.zip" when prompted.
Once the installation ends, repeat procedure with the latest SuperUser build previously downloaded.
Once the installation ends, select "+++++Go Back+++++" and "reboot system now".
Step 5: Enjoy your rooted device! :victory:
This has been tested only with a Spanish Galaxy Tab 10.1 Wifi device (GT-P7510) with stock Android 4.0.4 ROM installed.
Problems encountered:
If you have trouble running Odin, follow these steps:
Disconnect tablet from computer.
Uninstall Samsung Kies.
Reboot computer.
Download root.zip file from this post.
Install "GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe" drivers.
Retry again. Another reboot may be useful.
I want to thank you to all the staff of xda-developers and to all the users whose work I compiled here.
Click to expand...
Click to collapse
jovimon said:
Hello everybody,
I just successfully rooted my Galaxy Tab 10.1 Wifi (GT-P7510 model) using stock 4.0.4 ROM, and wanted to put up together all the steps, as they are disseminated through several posts and various broken links in the Galaxy Tab 10.1 Android Development forum.
...
Click to expand...
Click to collapse
Thank you very much!!! Very useful tutorial!!!!
jovimon said:
[*] Latest version of SuperUser from here. This is needed because SuperUser included in the other zipfile doesn't work well with ICS, as stated in this post.
Click to expand...
Click to collapse
These links to superuser (which is necessary, I tried the version from the play store and it didn't work) have changed, they are now found here:
http://hosted.androidsu.com/superuser/su-bin-3.1.1-arm-signed.zip
http://hosted.androidsu.com/superuser/Superuser-3.1.3-arm-signed.zip
After flashing these (along with the root zip) everything worked properly...
How to root my Tab from Linux?
There's no Odin on Linux so can someone post the steps that are needed using Heimdall-FrontEnd?
This is how I did it using Heimdall
gren0 said:
There's no Odin on Linux so can someone post the steps that are needed using Heimdall-FrontEnd?
Click to expand...
Click to collapse
For RPM-based distros:
Code:
$ su -
# yum install heimdall heimdall-frontend
# wget [url]http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.3.1-p4wifi.img[/url]
# wget [url]http://download.clockworkmod.com/superuser/superuser.zip[/url]
# adb push superuser.zip sdcard/
Put device into Download Mode
Attach USB cable
Code:
# heimdall flash --SOS recovery-clockwork-6.0.3.1-p4wifi.img # SOS = Galaxy Tab specific recovery partition name
Reboot into CWM Recovery Mode
Select to Install Zip file from external storage
Browse to /sdcard/superuser.zip
Install it
Go Back
Do Backup
Go Back
Reboot
Code:
$ adb shell
[email protected]:/ $ su
[email protected]:/ # id
uid=0(root) gid=0(root)
Done.
Related
Hi guys,
I've searched for this issue quite a bit, but couldn't find a recent post on how to fix it and am hoping there's an easy way. Anyway, here goes...
I rooted my Galaxy Tab 10.1 (GT-P7500 model) by following these steps: (I can't post url's yet):
Rooting the Samsung Galaxy Tab 10.1 3G (GT-P7500)
Download the rooting file (root.zip) for the Samsung Galaxy Tab 10.1 3G GT-P7500. Get it from here and save it to your computer.
Copy the rooting file to the root directory of your tablet’s storage. You may need to connect your tablet to your PC via USB cable to be able to do this.
Turn off your Samsung Galaxy Tab 10.1.
Reboot your tablet into recovery mode, as follows:
Press and hold both the Volume Down and Power buttons on your tablet.
Release the two buttons when you see the two icons on the screen.
Use the Volume Down button to navigate between the icons.
Highlight the icon on the left (box).
Press the Volume Up button to select it and boot into recovery mode.
From the recovery menu, select “Install zip from sdcard.”
Select “Choose zip from sdcard” then select “root.zip” from the list.
Confirm that you want to flash the ZIP file.
Reboot your tablet. It’s now rooted. Continue with the next steps for installing ClockworkMod Recovery.
Download and install ROM Manager to your tablet.
Launch the ROM Manager app.
Tap on “Flash ClockworkMod Recovery” from within the app. This will download and install ClockworkMod Recovery to your tablet.
Either through the manual method or the “Reboot into Recovery” function in ROM Manager, reboot the tablet into the device and check if ClockworkMod Recovery is working.
Click to expand...
Click to collapse
Everything worked perfectly fine, except this last step:
Tap on “Flash ClockworkMod Recovery” from within the app. This will download and install ClockworkMod Recovery to your tablet.
Either through the manual method or the “Reboot into Recovery” function in ROM Manager, reboot the tablet into the device and check if ClockworkMod Recovery is working.
Click to expand...
Click to collapse
The ClockworkMod Recovery installed just fine, got the "success" message etc. The nastiness started when I rebooted the tablet into recovery mode to test CWM. I have the somewhat-familiar "screen rolling" issue, where the screen rolls/jumps/whatever you want to call it. If I reboot the tab using the power button, it boots up fine and I don't notice any other issues with it, but recovery mode rolls all over the place if I access it.
I tried updating and flashing to ClockwordMod Touch to see if that solves the issue, but still the same thing: the tab works fine, but recovery mod does screen rolling.
My question is basically two-fold:
1) How do I fix this?
2) Will this weird screen issue in recovery mode result in any other issues with the tab itself? I mean, will whatever's causing the rolling affect anything else on the tab, like performance or whatever - or is the problem only limited to the recovery mode?
If the problem is simply limited to the recovery mode, then I'm not too fussed about it right now - as long as the tab isn't otherwise negatively affected.
EDIT: I have ClockworkMod version 5.8.3.1.
EDIT2: The tab is running Android 3.2. It also states that it's HSPA+, so I'm not sure whether that means it's 3G or 4G - I followed the 3G instructions as quoted above. Other users have reported that it works fine for them on both 3G and 4G models.
EDIT3: The rooting itself works fine, btw. Just the CWM isn't.
.
odin
You have to reflash an older version of CWM recovery with Odin (i think 5.5.x.x) chech the forum or internet for instructions. GV
I second that, exactly as gvloce wrote. Download a copy of CWM and flash using Odin.
I've always had problems flashing CWM via Rom Manager.
http://forum.xda-developers.com/showthread.php?t=1555984
This will fix it for you.
Sent from my GT-P7500 using XDA Premium HD app
isimobile said:
http://forum.xda-developers.com/showthread.php?t=1555984
This will fix it for you.
Click to expand...
Click to collapse
That did it, thanks!
Questions go in the Q&A section
Hi Guys,
This is a guide on how to get CyanogenMod and fully functional UNLOCKED BOOTLOADER Galaxy S4 Developer Edition for VZW.
Purchase Links
link
link
Once I got the phone I didnt find much help on how exactly to root the device and get custom rom loaded on it.
What bits and pieces of information I found was confusing... never the less after some reading I got to understand the basics of what needed to happen.
So here it is:
Files:
Download and Install Samsung Official USB Drivers - link
Download and extract ODIN v3.07 - Link MD5: 0C21E86A38C7868B0B50396EEE85721F
Download and extract this recovery - (Unzip ) - Link MD5: D8C883282D1584A0E067E12CCF8C1750
Download Cyanogen Mod - Link
Download Google Apps - ( for 10.1 stable ) Link
Click to expand...
Click to collapse
Follow the Steps in this guide:
GUIDE
Steps to Install ClockworkMod Recovery on Galaxy S4 I9505
Step 1: Extract Odin 3.07 file using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4 I9505. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy S4 I9505 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 5: In Odin, click the PDA button and select the [RECOVERY PROVIDED] file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Click to expand...
Click to collapse
At this point reboot the phone direclty in recovery by holding the VolUp button and pressing Power button until it vibrates.
You should see it power up and blue text appear in upper left corner " Recovery..."
if you don't pull the battery and try again.
You should see the familiar CWM Recovery appear.
Backup your system.
After that is complete Install CM10.1 and Google Apps.
Enjoy.
Click to expand...
Click to collapse
I take no responsibility for damaged devices. If you are not ready to loose your phone possibly forever keep it stock.
It worked for me.
All systems are operating at this point.
Small glitch with having to restart BT after I walk away from my car and get back in it and trying to reconnect to it.
The IR Sensor doesn't work. I saw that the drivers are being implemented with some of the nighly builds.... so its not far from being operational.
Also checkout this guide:
Link
If someone wants to rewrite this and make it cleaner please do .... =)
http://forum.xda-developers.com/attachment.php?attachmentid=2376307&stc=1&d=1383795414
Best.
Thanks for documenting your steps! I was running CM10 on my Epic 4G just before I switched over to the GS4 Developer Edition phone. I'm thinking of flashing it again.
zambezy said:
Hi Guys,
This is a guide on how to get CyanogenMod and fully functional UNLOCKED BOOTLOADER Galaxy S4 Developer Edition for VZW.
Click to expand...
Click to collapse
I have a new out the box Samsung Galaxy S5 G900T. The first time turning on the phone, these are the steps I took.
Step 1. Powered off Galaxy S5. Then hold down Volume Down, Center Home, and Power buttons together for about 3-5 seconds
Step 2. Hit Volume Up
Step 3. Next connect a USB 2.0 micro-USB cable from Galaxy S5 to my computer.
Step 4. download the following three files, ODIN3v185, Philz Touch CWM recovery 6.26.2, and SuperSU 1.94:
Step 5. Double-click on the file “odin3 v1.85.exe” to start the ODIN program. (Already Installed Samsung Drivers)
Step 6. Next, Auto Reboot is checked and choose “PDA” button and find the Philz Touch CWM recovery file
Step 7. Click on “Start”
The Recovery started to run, then it failed. I've tried multiple times without success.
Need Help.
quedogf94 said:
I have a new out the box Samsung Galaxy S5 G900T. The first time turning on the phone, these are the steps I took.
Step 1. Powered off Galaxy S5. Then hold down Volume Down, Center Home, and Power buttons together for about 3-5 seconds
Step 2. Hit Volume Up
Step 3. Next connect a USB 2.0 micro-USB cable from Galaxy S5 to my computer.
Step 4. download the following three files, ODIN3v185, Philz Touch CWM recovery 6.26.2, and SuperSU 1.94:
Step 5. Double-click on the file “odin3 v1.85.exe” to start the ODIN program. (Already Installed Samsung Drivers)
Step 6. Next, Auto Reboot is checked and choose “PDA” button and find the Philz Touch CWM recovery file
Step 7. Click on “Start”
The Recovery started to run, then it failed. I've tried multiple times without success.
Need Help.
Click to expand...
Click to collapse
Use Odin 3.10 , 1.85 is from the s2/s3 days. Also use a more up to date supersu meant for lollipop assuming you are on lollipop since stated it's new out the box. If you have kies installed disable / Uninstall it. Kies and Odin hate each other at times. Be sure you are using the correct Philz recovery for the device. I use twrp so no idea if you're using the correct one or version. Try different USB ports. I find that the high speed ones on back of the computer work better than easy access ones in the front.
Here i found a perfect way to root your Samsung Galaxy A8 (SM-A800F) on Lollipop 5.1.1 along with installing Xposed without installing TWRP.
Prerequisite :
1. CF Autoroot SM-A800F
2. Latest Odin
3. xposed-uninstaller-20160211.zip
4 .Xposed-v80.0-sdk22-arm-custom-build-by-wanam-20160211.zip
5. Flashfire on play store
Steps :
1. Extract CF Auto root to your PC
2. Copy Xposed to your phone internal SD-card
3. Enable Developer option on your device, and then enable OEM unlock
4. Turn off your phone
Then..
1. Go to download mode by pressing Volume Down + Home + Power at the same time
2. Plug in your USB cable
3. Open Odin, make sure Auto-Reboot and Reset time checked
4. Click AP, and choose CF-Auto-Root-a8elte-a8eltejv-sma800f.tar.md5
5. Press start., wait until finished then the phone reboot
6. You are rooted with SuperSu installed
7. Open Flashfire
8. Tap + at the bottom right
9. Choose “Flash ZIP or OTA” and leave “Auto-mount” option unchecked
10. Tap checkmark to continue
11. Tap Everoot and make sure all unchecked
12. Leave Reboot to Normal mode
13. Hit the lightning button to continue. It took about 1 - 2 minutes to complete.
14. And your phone is Xposed.
sthetix said:
Here i found a perfect way to root your Samsung Galaxy A8 (SM-A800F) on Lollipop 5.1.1 along with installing Xposed without installing TWRP.
Prerequisite :
1. CF Autoroot SM-A800F
2. Latest Odin
3. xposed-uninstaller-20160211.zip
4 .Xposed-v80.0-sdk22-arm-custom-build-by-wanam-20160211.zip
5. Flashfire on play store
Steps :
1. Extract CF Auto root to your PC
2. Copy Xposed to your phone internal SD-card
3. Enable Developer option on your device, and then enable OEM unlock
4. Turn off your phone
Then..
1. Go to recovery mode by pressing Volume Down + Home + Power at the same time
2. Plug in your USB cable
3. Open Odin, make sure Auto-Reboot and Reset time checked
4. Click AP, and choose CF-Auto-Root-a8elte-a8eltejv-sma800f.tar.md5
5. Press start., wait until finished then the phone reboot
6. You are rooted with SuperSu installed
7. Open Flashfire
8. Tap + at the bottom right
9. Choose “Flash ZIP or OTA” and leave “Auto-mount” option unchecked
10. Tap checkmark to continue
11. Tap Everoot and make sure all unchecked
12. Leave Reboot to Normal mode
13. Hit the lightning button to continue. It took about 1 - 2 minutes to complete.
14. And your phone is Xposed.
Click to expand...
Click to collapse
btw volume down+home+power button is called download mode. recovery mode is different. And also your tutorial mentions xposed uninstaller. how to use uninstaller if phone bootloops and we don't have twrp recovery? :/
Sorry, my fault. I have edit it to download mode. Thx for correcting.
I don't find any boot loop. And if you do, then you can try reflashing the phone back to stock.
the original recovery is still there.
you can as well install TWRP but you will find that red kernel error on boot (enforcing).
and you can only boot to TWRP by using NDR utils -- not with buttons.
its the 6th time am getting into bootloop
sthetix said:
Sorry, my fault. I have edit it to download mode. Thx for correcting.
I don't find any boot loop. And if you do, then you can try reflashing the phone back to stock.
the original recovery is still there.
you can as well install TWRP but you will find that red kernel error on boot (enforcing).
and you can only boot to TWRP by using NDR utils -- not with buttons.
Click to expand...
Click to collapse
am using galaxy a8(sm-a800f) tried so many times
downloaded the file from chainfire official site but still i ran into bootloop not booting in recovery nor the phone boots up stuck at a place where logo and red texts saying kernal isnot seandroid enforcing....
and sick of flashing stock whole again n again why amnot i succeding??
i aint any newbie to root or use odin but still....??
can anyone help me please,....... :crying::crying:
hey mate, any luck with rooting on 6.0.1?
I got the red recovery is not se enforcing error and it gets stuck there... to make matters worse sammobile is down today for maintenance and I cant download a stock firmware for now...
cant find other threads about rooting the A800F please let me know if there is any... thanks...
prince Niks said:
am using galaxy a8(sm-a800f) tried so many times
downloaded the file from chainfire official site but still i ran into bootloop not booting in recovery nor the phone boots up stuck at a place where logo and red texts saying kernal isnot seandroid enforcing....
and sick of flashing stock whole again n again why amnot i succeding??
i aint any newbie to root or use odin but still....??
can anyone help me please,....... :crying::crying:
Click to expand...
Click to collapse
sthetix said:
Sorry, my fault. I have edit it to download mode. Thx for correcting.
I don't find any boot loop. And if you do, then you can try reflashing the phone back to stock.
the original recovery is still there.
you can as well install TWRP but you will find that red kernel error on boot (enforcing).
and you can only boot to TWRP by using NDR utils -- not with buttons.
Click to expand...
Click to collapse
hey there, does this xposed work on A800F with 6.0.1 marshmallow?
or is it only for lollipop?
thanks
great need of help from you guys...
i have a samsung a8(sm a800f vietnam, android 5.0.0) from my aunt but she had this phone for almost 2 years and gave it to me. i wanted to make it faster and maybe have an android 6.0.0 on it(if possible). im a super noob on this process but i already tried this thread and ([ROOT][TWRP][Xposed][New] Samsung Galaxy A8 (A800F/A800I) on 6.0.0)<< this too. hope you guys could help me i would very well appreciate it.
What is TWRP?
I quote
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
WHAT IS THE USE OF INSTALLING TWRP?
TWRP is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM.
You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/
The above text was from
https://twrp.me/about/
Download TWRP version 3.2.1-0 from
http://www.mediafire.com/file/0bhuw8gw233c3wa/twrp-3.2.1-0-degas.img.tar
HOW DO I INSTALL THE RECOVERY?
1.Download Odin from http://www.mediafire.com/file/sbobzdpre78l569/Odin3_v3.12.3.zip
STEP 1:
Put your phone into download mode.
Press and hold these three buttons until you see a WARNING SCREEN! to enter into the Download mode:
Volume DOWN key + Power key + Home key
When you see the WARNING SCREEN press the volume UP key to continue into the Download mode.
STEP 2:
Open the ODIN application on your PC. Connect your phone(while it is still in the download mode) to the PC using a USB cable.
ODIN will show an Added! message on the message box.
Device Added on ODIN
STEP 3:
Click on the AP button on the ODIN application and select the twrp-x.x.x-x-codename.img.tar file.
Click on the AP button (PDA in many Odin versions) and select the CWM recovery file
STEP 4:
Select the appropriate options before flashing the recovery image.Make sure only the Auto Reboot and F. Reset Time are checked and all other boxes are un-checked.
Select the ODIN Options
STEP 5:
Select the Start button, which will start the flashing process. When you get the PASS message, then your phone will reboot automatically.
Click on Start and wait till it completes
Now your Samsung Device is flashed with the TWRP image and you may disconnect your phone. Your phone should restart by itself if not press and hold the power button. Boot into your recovery by holding together power-volume up-and home button.
HOW TO UPDATE YOUR RECOVERY?
Your TWRP recovery can be easily updated by flashing an image file. It's very simple and easy.
1.Download the latest version of twrp. Make sure it is a .img file
Download it from http://www.mediafire.com/file/1q0oq8s8yykcxov/twrp-3.2.1-0-degas.img
2.Boot into the TWRP recovery
3.Press on install and then press install image
4.Click on recovery
5.And follow the instructions and that's it.
If you found this helpful, please give me a thanks. Have a nice day. Enjoy
All these files were obtained from TWRP's official site and from samsung odin. I own nothing and does not claim authority over these files. These files were uploaded to MediaFire for ease of access and for educational purposes.
Samsung Odin https://odindownload.com/
TWRP https://twrp.me/
Thedark night in the dark said:
What is TWRP?
I quote
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
WHAT IS THE USE OF INSTALLING TWRP?
TWRP is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM.
You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/
The above text was from
https://twrp.me/about/
Download TWRP version 3.2.1-0 from
[url]http://www.mediafire.com/file/0bhuw8gw233c3wa/twrp-3.2.1-0-degas.img.tar
HOW DO I INSTALL THE RECOVERY?
1.Download Odin from http://www.mediafire.com/file/sbobzdpre78l569/Odin3_v3.12.3.zip
STEP 1:
Put your phone into download mode.
Press and hold these three buttons until you see a WARNING SCREEN! to enter into the Download mode:
Volume DOWN key + Power key + Home key
When you see the WARNING SCREEN press the volume UP key to continue into the Download mode.
STEP 2:
Open the ODIN application on your PC. Connect your phone(while it is still in the download mode) to the PC using a USB cable.
ODIN will show an Added! message on the message box.
Device Added on ODIN
STEP 3:
Click on the AP button on the ODIN application and select the twrp-x.x.x-x-codename.img.tar file.
Click on the AP button (PDA in many Odin versions) and select the CWM recovery file
STEP 4:
Select the appropriate options before flashing the recovery image.Make sure only the Auto Reboot and F. Reset Time are checked and all other boxes are un-checked.
Select the ODIN Options
STEP 5:
Select the Start button, which will start the flashing process. When you get the PASS message, then your phone will reboot automatically.
Click on Start and wait till it completes
Now your Samsung Device is flashed with the TWRP image and you may disconnect your phone. Your phone should restart by itself if not press and hold the power button. Boot into your recovery by holding together power-volume up-and home button.
HOW TO UPDATE YOUR RECOVERY?
Your TWRP recovery can be easily updated by flashing an image file. It's very simple and easy.
1.Download the latest version of twrp. Make sure it is a .img file
Download it from http://www.mediafire.com/file/1q0oq8s8yykcxov/twrp-3.2.1-0-degas.img
2.Boot into the TWRP recovery
3.Press on install and then press install image
4.Click on recovery
5.And follow the instructions and that's it.
If you found this helpful, please give me a thanks. Have a nice day. Enjoy
Click to expand...
Click to collapse
You can also download all these files together by using this link
http://www.mediafire.com/folder/c3cd4fzs1zqp8/Samsung_Galaxy_Tab_4
It works. Try it out
Thedark night in the dark said:
You can also download all these files together by using this link
http://www.mediafire.com/folder/c3cd4fzs1zqp8/Samsung_Galaxy_Tab_4
It works. Try it out
Click to expand...
Click to collapse
Please tell me if you found this helpful
Thedark night in the dark said:
Please tell me if you found this helpful
Click to expand...
Click to collapse
I just followed your upgrade instructions and was successfully able to upgrade from TWRP 2.7.x and it works great! Results were instant and I was also able to immediately successfully flash a custom ROM to my SM-T230NU. Thanks so much for posting this!
redivivus613 said:
I just followed your upgrade instructions and was successfully able to upgrade from TWRP 2.7.x and it works great! Results were instant and I was also able to immediately successfully flash a custom ROM to my SM-T230NU. Thanks so much for posting this!
Click to expand...
Click to collapse
You are welcome.
If you are going to install a rom try this
https://forum.xda-developers.com/tab-4/development/sm-t230-nu-unofficial-cm-11-based-t3648887
or
this
https://forum.xda-developers.com/tab-4/development/rom-tranchidakat-v1-0-t3302042
If you found any other rom. You can flash that.
If you need Gapps or any instructions tell me
Have a nice day
Only 1 AP button
Thedark night in the dark said:
Click on the AP button on the ODIN application and select the twrp-x.x.x-x-codename.img.tar file.
Click on the AP button (PDA in many Odin versions) and select the CWM recovery file
Click to expand...
Click to collapse
This is where you lost me.
I have Odin v3.12, and it only has one AP button, but no PDA button.
I clicked on AP button in Odin, and selected the twrp image.tar file. Check.
Then you tell me to click on the AP button again and select the CWM file, but if I do that, then the twrp file is no longer selected.
I'm afraid to guess because even though it's old, I don't want to brick this thing.
kamikazeedriver said:
This is where you lost me.
I have Odin v3.12, and it only has one AP button, but no PDA button.
I clicked on AP button in Odin, and selected the twrp image.tar file. Check.
Then you tell me to click on the AP button again and select the CWM file, but if I do that, then the twrp file is no longer selected.
I'm afraid to guess because even though it's old, I don't want to brick this thing.[/QUOTE
wow]
yeah I would like to know the exact same thing. SOMEONE ANYONE . a response would be greatly appreciated
Click to expand...
Click to collapse
To get TWRP on my device, I followed the instructions listed here: tab-4/orig-development/twrp-install-twrp-root-samsung-galaxy-t3111934
(I can't post links. Just put forum.xda-developers in front of that)
Instead of using TWRP 3.0.0 or 2.8, I used this newest verison with Odin 3.09 (instead of 3.12)
And it worked on my T230NU
"SOMEONE ANYONE" ...those mysterious instructions entries...
i probably qualify as an anyone, that is im doing this for the first time, though i have some experience with doing the same thing to my old HP Touchpad (tenderloin) device over and over again over the years, to keep it from throwing up alerts about apps stopping... So yes i was confused by the same glitches in the instructions since i dont want to brick my old tablet and try to follow instructions exactly:
A) in STEP 2:
"Device Added on ODIN"
>> no Odin doesnt actually print those words out, i think the op is sort of restating the sentence above it.
B) in STEP 3:
"Click on the AP button (PDA in many Odin versions) and select the CWM recovery file"
>> I think this is just a copy/paste error the op took from some other post and never cleaned up, presumably CWM refers to ClockWorkMod which is different recovery in itself, and i don't suspect you can have two recoveries installed, no? plus, its not mentioned anywhere else in this thread no link of anything, so i just ignored that line and proceeded according to the rest of the instructions.
C) STEP 4:
"Select the ODIN Options"
>> another instance of repeating whats already been instructed in the sentence above it.
So I just ignored the items noted above, the only other thing i did that is different from this thread is i had previously installed the samsung USB drivers noted as seemingly important in other threads, i dont know if that matters since ive never tried it without them, but anyways, I hit 'start' and it worked fine and said PASS in about 5 seconds, then a bit later rebooted, but took a couple minutes to get out of the Samsung logo boot screen -i almost thought it was bricked for a moment there- but it finally came through and it all seems okay. so now i can reboot into TWRP and see all of its options, so now im ready to give a try to install the Pixelized OS!
For my T230NU, TWRP reboots (crashes) reliably in the middle of the wiping-the-cache process:
The TWRPs i tried are "twrp-3.0.0-0-degas.img.tar", "twrp-3.2.1-0-degas.img.tar" , "twrp-3.3.0-0-degas.img.tar"
I selected the usual four items to wipe: "Dalvic cache", "cache", "system", "Data"
(the built-in one-swipe factory-reset wipe crashes just the same)
I installed them all with Odin 3.12.3
This older version seems just fine: "openrecovery-twrp-2.8.0.1-degas.tar"
Will this image work with Verizon Tablet SM-T537V?
Hey, will this work on degaswifi (regular SM-T230)?
slap happy gas pedal said:
For my T230NU, TWRP reboots (crashes) reliably in the middle of the wiping-the-cache process:
The TWRPs i tried are "twrp-3.0.0-0-degas.img.tar", "twrp-3.2.1-0-degas.img.tar" , "twrp-3.3.0-0-degas.img.tar"
I selected the usual four items to wipe: "Dalvic cache", "cache", "system", "Data"
(the built-in one-swipe factory-reset wipe crashes just the same)
I installed them all with Odin 3.12.3
This older version seems just fine: "openrecovery-twrp-2.8.0.1-degas.tar"
Click to expand...
Click to collapse
Flashed it successfully on my SM-T230NU, however I am also experiencing a crash during a built-in wipe. I reverted back to v3.0.0 and it seems to be working as expected. Thanks,
Thedark night in the dark said:
What is TWRP?
I quote
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
WHAT IS THE USE OF INSTALLING TWRP?
TWRP is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM.
You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/
The above text was from
https://twrp.me/about/
Download TWRP version 3.2.1-0 from
http://www.mediafire.com/file/0bhuw8gw233c3wa/twrp-3.2.1-0-degas.img.tar
HOW DO I INSTALL THE RECOVERY?
1.Download Odin from http://www.mediafire.com/file/sbobzdpre78l569/Odin3_v3.12.3.zip
STEP 1:
Put your phone into download mode.
Press and hold these three buttons until you see a WARNING SCREEN! to enter into the Download mode:
Volume DOWN key + Power key + Home key
When you see the WARNING SCREEN press the volume UP key to continue into the Download mode.
STEP 2:
Open the ODIN application on your PC. Connect your phone(while it is still in the download mode) to the PC using a USB cable.
ODIN will show an Added! message on the message box.
Device Added on ODIN
STEP 3:
Click on the AP button on the ODIN application and select the twrp-x.x.x-x-codename.img.tar file.
Click on the AP button (PDA in many Odin versions) and select the CWM recovery file
STEP 4:
Select the appropriate options before flashing the recovery image.Make sure only the Auto Reboot and F. Reset Time are checked and all other boxes are un-checked.
Select the ODIN Options
STEP 5:
Select the Start button, which will start the flashing process. When you get the PASS message, then your phone will reboot automatically.
Click on Start and wait till it completes
Now your Samsung Device is flashed with the TWRP image and you may disconnect your phone. Your phone should restart by itself if not press and hold the power button. Boot into your recovery by holding together power-volume up-and home button.
HOW TO UPDATE YOUR RECOVERY?
Your TWRP recovery can be easily updated by flashing an image file. It's very simple and easy.
1.Download the latest version of twrp. Make sure it is a .img file
Download it from http://www.mediafire.com/file/1q0oq8s8yykcxov/twrp-3.2.1-0-degas.img
2.Boot into the TWRP recovery
3.Press on install and then press install image
4.Click on recovery
5.And follow the instructions and that's it.
If you found this helpful, please give me a thanks. Have a nice day. Enjoy
All these files were obtained from TWRP's official site and from samsung odin. I own nothing and does not claim authority over these files. These files were uploaded to MediaFire for ease of access and for educational purposes.
Samsung Odin https://odindownload.com/
TWRP https://twrp.me/
Click to expand...
Click to collapse
I have a SM-T230NU (nook). It freezes at boot after the "nook" logo screed is displayed. When I power down it immediately reboots to the same logo screen and again freezes. I can't turn it off without taking the back off and unplugging the battery. When I plug the battery back in after a few minutes, it stays off until I try to boot again and the same cycle repeats itself. Any ideas how to fix this.