My Evo has been completely trashed and I have no clue what to do.
I have hboot 1.19 s-on and I did the HTCdev unlock, and I rooted it and have the latest version TWRP (i think 2.3.something) with SuperSU installed. I tried to flash a ROM that was supposed to be compatible with with I had but i guess not. Everything was going great but I was stuck on the CM boot screen. After about 30 min of it sitting in that screen I figured something was wrong so i reset it and went back into TWRP. Someone told me to download MeanRom and flash that because its kernel and rom would fix everything. Here's where things get weird. I download MeanRom to my computer and mount my phone in TWRP to move the file over to the phone and when i went to factory reset before flashing it it kept saying unable to mount SD card and Internal Storage. I tried to do a restore my phone to an old back up and that wouldnt even work. So I wipe both caches and try to flash MeanRom anyway. i got a failed error and my phone shut off. Now my phone will only go into the Fastboot thing on the white screen and when i try to go into recovery, it just stays on the TWRP loading screen, not even letting me into the recovery program.
Is there anyway to fix this? My best buy insurance has expired because i missed 3 payments since I'm away at school and not working a whole bunch. So my whole smash it to pieces and get a new one solution is no longer an option.
I'm on a mac by the way so is there something I can enter into terminal to fix this? I don't care about losing any files or anything I'll do whatever I have to, to fix this.
Thanks in advance
- Josh
Read om4's guide don't panic...hboot 119 s-on you have to flash kernels separately.
Sent from my EVO using xda premium
I ran into the same problem. Word for word, really. I use a Mac, too. I went through HTCdev unlock, tried to flash a CM10 nightly and ran into a boot loop. No matter what I did, it was stuck. I couldn't restore to a nandroid backup because internal storage wouldn't mount. Couldn't do anything. All I had access to was bootloader and TWRP recovery.
I don't know the specifics of how this fixed it (I'm nothing close to a developer), but this is what I did to get out of it. You will need access to a Windows machine onto which you can download things.
1) If you still have access to fastboot, unroot your phone to stock. Completely stock.
2) Use DirtyRacun S-OFF (you'll need a Windows computer for this). Go through the whole process.
3) Re-root.
Nothing I tried fixed it until I started fresh. I couldn't tell you how it worked, but if you're desperate you really have nothing to lose but a little bit of time by doing the same thing I did.
Hope you get this figured out.
falconoble said:
I ran into the same problem. Word for word, really. I use a Mac, too. I went through HTCdev unlock, tried to flash a CM10 nightly and ran into a boot loop. No matter what I did, it was stuck. I couldn't restore to a nandroid backup because internal storage wouldn't mount. Couldn't do anything. All I had access to was bootloader and TWRP recovery.
I don't know the specifics of how this fixed it (I'm nothing close to a developer), but this is what I did to get out of it. You will need access to a Windows machine onto which you can download things.
1) If you still have access to fastboot, unroot your phone to stock. Completely stock.
2) Use DirtyRacun S-OFF (you'll need a Windows computer for this). Go through the whole process.
3) Re-root.
Nothing I tried fixed it until I started fresh. I couldn't tell you how it worked, but if you're desperate you really have nothing to lose but a little bit of time by doing the same thing I did.
Hope you get this figured out.
Click to expand...
Click to collapse
How would i unroot if I cant get into SuperSU since i cant boot up my phone? Do I need to do that first or can i just run the RUU without Going into SuperSU and hitting Unroot?
Also what do I need windows for? Getting S-OFF? Or unrooting?
Also thank you! I really hope this work!
Relock your phone from fastboot then run the RUU. Now you're completely stock.
Sent from my rooted LTEVO running CM10.
Shahal said:
Relock your phone from fastboot then run the RUU. Now you're completely stock.
Sent from my rooted LTEVO running CM10.
Click to expand...
Click to collapse
I'm sorry if this is a stupid question. But how do i re-lock it from fastboot?
U have to use the cmd window on your windows computer. I did it with mine before I ran dirty racun. It is a simple command but u have to be in the right directory ind the cmd line. Go through and look at the dirty racun guide and it tells u how to re-lock word for word I believe.
Sent from my EVO using xda app-developers app
Shahal said:
Relock your phone from fastboot then run the RUU. Now you're completely stock.
Sent from my rooted LTEVO running CM10.
Click to expand...
Click to collapse
Okay so I found a video on how to re-lock my phone in fastboot but when i type the command "fastboot oem lock"
it just says ' <waiting for device >
any suggestions on what to do? It's been stuck like this for about 5 min now.. in the video it took less than a second.
jklatt747 said:
Okay so I found a video on how to re-lock my phone in fastboot but when i type the command "fastboot oem lock"
it just says ' <waiting for device >
any suggestions on what to do? It's been stuck like this for about 5 min now.. in the video it took less than a second.
Click to expand...
Click to collapse
Turn on USB debug in devopleper options
Sent from a lens flare powered EVO LTE
What's funny is that all you had to do with s-on is flash the boot.IMG from the ROM via fastboot, just like the first reply said to.
You're doing more work right now than you needed to.
I realize this is a little late, but if you're still having trouble and you're still s-on, go read om4's guide, or get s-off.
If you want to stick with s-on, you will have to fastboot flash the boot.IMG files from the ROM manually.
jkrlvgn said:
What's funny is that all you had to do with s-on is flash the boot.IMG from the ROM via fastboot, just like the first reply said to.
You're doing more work right now than you needed to.
I realize this is a little late, but if you're still having trouble and you're still s-on, go read om4's guide, or get s-off.
If you want to stick with s-on, you will have to fastboot flash the boot.IMG files from the ROM manually.
Click to expand...
Click to collapse
Yeah i couldn't figure out how to do that. I would ask a question on how to do that and i just kept on getting the response of "google it" "look it up on youtube" or look in the forums. and I wasn't ever sure really where to find it because all my searches for it came up useless.
I just did the RUU on my phone and its finally back up and running! What a relief!!!
Now I'm going to try to get DirtyRacun s-off. How do I put a Custom Rom on my phone with S-off?
With s-off you just flash it in twrp..no extra steps
Sent from my EVO using xda premium
jkrlvgn said:
What's funny is that all you had to do with s-on is flash the boot.IMG from the ROM via fastboot, just like the first reply said to.
You're doing more work right now than you needed to.
I realize this is a little late, but if you're still having trouble and you're still s-on, go read om4's guide, or get s-off.
If you want to stick with s-on, you will have to fastboot flash the boot.IMG files from the ROM manually.
Click to expand...
Click to collapse
I only have windows 7 64bit. So this means i cannot go the dirtyracun route. Is there any other way to get S-OFF?
if not.. How do i fastboot flash the boot.IMG from the ROM manually?
jkrlvgn said:
What's funny is that all you had to do with s-on is flash the boot.IMG from the ROM via fastboot, just like the first reply said to.
You're doing more work right now than you needed to.
I realize this is a little late, but if you're still having trouble and you're still s-on, go read om4's guide, or get s-off.
If you want to stick with s-on, you will have to fastboot flash the boot.IMG files from the ROM manually.
Click to expand...
Click to collapse
I wish I'd ran into you when I had the same problem. I wasn't trying to make things more complicated for him, just telling him that when it happened to me, I went back to stock, went with S-OFF, and everything worked fine. At the very least I figured he probably would have just wanted his phone back.
falconoble said:
I wish I'd ran into you when I had the same problem. I wasn't trying to make things more complicated for him, just telling him that when it happened to me, I went back to stock, went with S-OFF, and everything worked fine. At the very least I figured he probably would have just wanted his phone back.
Click to expand...
Click to collapse
No. You helped me soooooo much! I was literally about to sell my phone for parts or something because everything went wrong that could go wrong and on top of that I couldn't find anything at all on how to fix it. I just did what you said and my phone is fixed! I want to go s-off now but dirtyracun doesn't support windows 7 with 64 bit, it only supports windows 7 with 32bit which I don't have access to. So i'm trying to find another way that is reliable to go S-OFF. It seems like S-OFF is the way to go and it makes everything easier.
If I cant find out how to go S-OFF with the windows 7 64 bit computer, then I guess i'll go S-on HTCdev unlock again and hopefully figure out how to manually flash the ROM or whatever it is that you do with S-ON.
jklatt747 said:
No. You helped me soooooo much! I was literally about to sell my phone for parts or something because everything went wrong that could go wrong and on top of that I couldn't find anything at all on how to fix it. I just did what you said and my phone is fixed! I want to go s-off now but dirtyracun doesn't support windows 7 with 64 bit, it only supports windows 7 with 32bit which I don't have access to. So i'm trying to find another way that is reliable to go S-OFF. It seems like S-OFF is the way to go and it makes everything easier.
If I cant find out how to go S-OFF with the windows 7 64 bit computer, then I guess i'll go S-on HTCdev unlock again and hopefully figure out how to manually flash the ROM or whatever it is that you do with S-ON.
Click to expand...
Click to collapse
Most sense roms come with a kernel installer for people that are S-ON and there have been reports of success using Win7 64bit and running DirtyRacun but.... if you run into problems they will not help you
bigdaddy619 said:
Most sense roms come with a kernel installer for people that are S-ON and there have been reports of success using Win7 64bit and running DirtyRacun but.... if you run into problems they will not help you
Click to expand...
Click to collapse
okay does anybody know on a mac what would I have to do to flash MeanRom to my phone with S-ON and HTCdev unlock?
I'm not sure how to use the kernel installer you're talking about or where to look for it.
jklatt747 said:
okay does anybody know on a mac what would I have to do to flash MeanRom to my phone with S-ON and HTCdev unlock?
I'm not sure how to use the kernel installer you're talking about or where to look for it.
Click to expand...
Click to collapse
It's included in the script just flash it like any other rom it takes a little longer to boot because it's writing the kenel so don't freak out
jklatt747 said:
okay does anybody know on a mac what would I have to do to flash MeanRom to my phone with S-ON and HTCdev unlock?
I'm not sure how to use the kernel installer you're talking about or where to look for it.
Click to expand...
Click to collapse
There is an app in the market called Flash Image GUI to use it all you have to do is click on browse in the app search where ever you downloaded your Rom or kernel select it and it will extract and flash the boot.IMG for you. So if you are s on and wanna flash a aosp Rom you can first flash the kernel using the app then it gives you the option to boot directly in to recovery then install as usual wipe system ,data, both caches and flash your Rom that you extracted the kernel from. You can also just flash just a kernel if you want to OC.
Sent from my EVO using xda premium
bigdaddy619 said:
It's included in the script just flash it like any other rom it takes a little longer to boot because it's writing the kenel so don't freak out
Click to expand...
Click to collapse
dandan2980 said:
There is an app in the market called Flash Image GUI to use it all you have to do is click on browse in the app search where ever you downloaded your Rom or kernel select it and it will extract and flash the boot.IMG for you. So if you are s on and wanna flash a aosp Rom you can first flash the kernel using the app then it gives you the option to boot directly in to recovery then install as usual wipe system ,data, both caches and flash your Rom that you extracted the kernel from. You can also just flash just a kernel if you want to OC.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Okay so here's whats happens for me.
When i go bigdaddy's way: I put the MeanRom zip on my phone from my computer (MeanRom v64 or what ever the latest one is) I factory reset, wipe cache, wipe dalvic chache, and then go to install find the app and swipe to flash.. everything seems fine until i get an error and fail. It also says there is no MD5 file when i do this.
When I go dandan's way: I have the MeanRom zip on my phone (i've tried this with v64 *or whatever the latest one is* and v34) then i go into flash image GUI and go through finding it and everything. Then i get an error right above the Flash Image button saying "zip file must contain only one of the following: recovery.img, zimage, or a type of boot.img!" On my computer I unzipped the file and looked inside and all I see the boot.img and some folders but no recover or zimage so i dont know what it is talking about.
I really dont want to go through the processes of unrooting and relocking my phone again so i want to do this right. Any help from here on out would be greatly appreciated!
If someone could give me a step by step to follow or something for putting the Latest version of MeanRom on my phone that would be great!! I think i read somewhere that you have to put on the old version of MeanRom first. If that is so, could you also include how i would go about updating from the old version to the new one?
(If you're going to help me please make sure your method supports the HTC EVO 4G LTE on hBoot 1.19 Software v. 2.13.651.1 71ORD HTCdev Unlocked and Rooted with SuperSU and TWRP. (GooManager, and Flash Image GUI are installed to)
I dont know if this matters but it also says under Kernel Version:
3.0.8-01680-gb6402b4
[email protected] #1
SMP PREEMPT
Other info:
Baseband v: 1.12.11.0809
Android Version: 4.04
HTC Sense: 4.1
HTC SDK API level: 4.24
I know this post is really long and I probably put waaayyy more information then I actually needed to but I just want to be safe. It seems like everything I try for putting any Roms on my phone goes wrong with an error or failed message and I really want to do this.
Related
i started i started running mik runny yesterday. I dont know if it was somethign with the rom but. I just updated my prl on dfs and once i went to reboot it wont go past the white htc screen and just keeps bootlooping. I cannot figure it out. Ive wiped everything muiltiple times. my nanadroids do the same thing. New roms too. I even did a factory reset. i dont get it My recovery and fastboot still work though. any other suggestions?
Flashed a new recovery img. i was using twrp2.0 i flashed twrp 1.3 to see if i had any luck with that but no dice. Im downloading the latest RUU now and hopefully that will fix it. Im guessing if it doesnt then something happened to my phone. If im not mistaken flashing the PG86IMG will flash allthe partitions so there would be no reason for it to not work unless of course something happened to the hardware?
Btw Hboot 1.4 and running mikrunny when the bootloop started. Im super confused since it booted fine for me numerous times. The only thing i changed before this reboot was prl and i turned fastboot off earlier. one other thing im downloading RUU_Shooter_S_Sprint_WWE_2.17.651.5 radio 1.00.1216 this isnt going to affect my hboot once flashing right? even if i have to re root thats fine i just dont wanna get stuck in 1.5 prison
Is your phone unlocked and s-off
Sent from my PG86100 using XDA App
jwolf1 said:
Is your phone unlocked and s-off
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
yea. i want to run one of the ruu but not sure which one to run in order to keep my hboot at 1.4 so i can re root.
It depends all on the update an ruin will
Tell u if there's a new. Version
Sent from my PG86100 using XDA App
mteezey said:
i started i started running mik runny yesterday. I dont know if it was somethign with the rom but. I just updated my prl on dfs and once i went to reboot it wont go past the white htc screen and just keeps bootlooping. I cannot figure it out. Ive wiped everything muiltiple times. my nanadroids do the same thing. New roms too. I even did a factory reset. i dont get it My recovery and fastboot still work though. any other suggestions?
Flashed a new recovery img. i was using twrp2.0 i flashed twrp 1.3 to see if i had any luck with that but no dice. Im downloading the latest RUU now and hopefully that will fix it. Im guessing if it doesnt then something happened to my phone. If im not mistaken flashing the PG86IMG will flash allthe partitions so there would be no reason for it to not work unless of course something happened to the hardware?
Btw Hboot 1.4 and running mikrunny when the bootloop started. Im super confused since it booted fine for me numerous times. The only thing i changed before this reboot was prl and i turned fastboot off earlier. one other thing im downloading RUU_Shooter_S_Sprint_WWE_2.17.651.5 radio 1.00.1216 this isnt going to affect my hboot once flashing right? even if i have to re root thats fine i just dont wanna get stuck in 1.5 prison
Click to expand...
Click to collapse
TWRP 2.0 has been giving dirty flashes. I had nothing but bad things with it along with other folks. I jumped back to CWM as recovery it has been stable and flashes smooth no dirty flashes.
reaper24 said:
TWRP 2.0 has been giving dirty flashes. I had nothing but bad things with it along with other folks. I jumped back to CWM as recovery it has been stable and flashes smooth no dirty flashes.
Click to expand...
Click to collapse
well im kinda stuck now. I tried to run the ruu for my hboot version and on step 11 system it failed to unzip. so now i have s off still but no recovery. Im gonna try to put cwm back on my sd and hope that it flashes and see if i can get some rom to flash. I cant figure this out i feel like a newb again. fml. Does it matter that it wasnt the first time i booted into the rom for it to be a bad flash like that?
well i think im officially bricked. I ran an older ruu and it failed to unzip system so after much searching i decided to run one of the latest pg86imgs it fully updated succesfully but still bootloops at the htc screen. So now i have a locked hboot 1.5 with s-off. I gotta get some sleep and see what i can do tommorow. from evreything i have read they say im not bricked if im able to do what i have. but i dont understand why nothing will work.
mteezey said:
well i think im officially bricked. I ran an older ruu and it failed to unzip system so after much searching i decided to run one of the latest pg86imgs it fully updated succesfully but still bootloops at the htc screen. So now i have a locked hboot 1.5 with s-off. I gotta get some sleep and see what i can do tommorow. from evreything i have read they say im not bricked if im able to do what i have. but i dont understand why nothing will work.
Click to expand...
Click to collapse
Sup man your not bricked don't worry or even soft bricked lol.
You should of waited on that updated zip reason it's boot loopin or lockin up is due to the phone never got wiped before the update....
Here is the CWM that will work for you. You need to put the img in your platform tools for ADB. Rename the img file to cwm then plug your phone in while in hboot. Type fastboot flash recovery cwm.img this will put the recovery back on your phone man.
In CWM you can mount your phone and copy a rom you downloaded off xda. Take the rom you downloaded open it up on your computer make a copy of the boot.img place that in your platform tools folder. Now mount your phone using CWM copy the romwhich will put it on your sd card. Now wipe everything. Then while in ADB type : adb reboot bootloader this will take you to hboot again now type fastboot flash boot boot.img this will flash the kernel for you. Now go back into recovery and flash your rom.
You should be good to go man. Let me know if you have any questions.
This should get your phone working...
The good thing about the 3vo is dat its unbrickable just always keep a Rom u ones work an always erase scrub thing / factory reset cutting shortcuts don't work in rooting/dev world
Sent from EPIC JWOLF1 using XDA App
reaper24 said:
Sup man your not bricked don't worry or even soft bricked lol.
You should of waited on that updated zip reason it's boot loopin or lockin up is due to the phone never got wiped before the update....
Here is the CWM that will work for you. You need to put the img in your platform tools for ADB. Rename the img file to cwm then plug your phone in while in hboot. Type fastboot flash recovery cwm.img this will put the recovery back on your phone man.
In CWM you can mount your phone and copy a rom you downloaded off xda. Take the rom you downloaded open it up on your computer make a copy of the boot.img place that in your platform tools folder. Now mount your phone using CWM copy the romwhich will put it on your sd card. Now wipe everything. Then while in ADB type : adb reboot bootloader this will take you to hboot again now type fastboot flash boot boot.img this will flash the kernel for you. Now go back into recovery and flash your rom.
You should be good to go man. Let me know if you have any questions.
This should get your phone working...
Click to expand...
Click to collapse
Ok so now that i ran that ruu that changed my hboot to 1.5 is that gonna affect how the cwm installs?even though it says s-off. Also for some reason im having trouble running any commands for fastboot. Ive followed a bunch of guides made sure the envinronemtal variables were correct ect, ect but none of the adb commands will work. Maybe its my pc idk.
Since i cant get fastboot to work on my pc do you think i would just be able to reinstall clockworkmod by renaming it on my sd like you do to root in the first place. Then use it to wipe and then try reflashing?
U might have to re unlock it if ur 3vo says locked at the top if not u should have no problem
Sent from my PG86100 using XDA App
I was able to re run the pg86img with the 1.4 hboot now im back on hboot 1.4 still with soff and doesnt say locked anymore. I also was able to install recovery again but i used twrp 1.3 since none of the download links i could find were good and the ones that were good were disk img. I tried running virus superwipe tool and reflashing a rom again to see if anyhtign changed but it didnt. i really just wish i could get the commands to work to use fastboot and adb.
One thing i just noticed in recovery i went into mounts and system and data were unmounted and cache and sdcard were mounted. Do i need to mount everything and try again or was that the way it should of been?
mteezey said:
Ok so now that i ran that ruu that changed my hboot to 1.5 is that gonna affect how the cwm installs?even though it says s-off. Also for some reason im having trouble running any commands for fastboot. Ive followed a bunch of guides made sure the envinronemtal variables were correct ect, ect but none of the adb commands will work. Maybe its my pc idk.
Since i cant get fastboot to work on my pc do you think i would just be able to reinstall clockworkmod by renaming it on my sd like you do to root in the first place. Then use it to wipe and then try reflashing?
Click to expand...
Click to collapse
I read about the 1.5 with s-off issue a while back when hboot 1.5 first was released. As long as you have s-off, it doesn't really matter what hboot you have. You'll be able to flash entire ROMs (kernel included) in one step just like you could before your issue arose, because you have s-off. I sadly don't have enough experience with fastboot to be able to give you an easy guide to flashing cwm onto your phone though, but I hope this helps you at least somewhat.
EDIT: I just realized everything I said now doesn't matter since you're not on hboot 1.5 anymore...sorry about that. reaper24 gave you a link to cwm 4.0.1.4 in post #8 in this thread. Stop using TWRP 1.3, there's already a TWRP 2 specifically for EVO 3D and even the latest TWRP has been having issues. CWM has been completely stable for me on every HTC phone I've ever used (Hero CDMA, EVO 4G and now currently the EVO 3D). CWM 4.0.1.4 is in post #8 of this thread as an attachment (it's a small link in between reaper's post and his signature)
w0rdOo said:
I read about the 1.5 with s-off issue a while back when hboot 1.5 first was released. As long as you have s-off, it doesn't really matter what hboot you have. You'll be able to flash entire ROMs (kernel included) in one step just like you could before your issue arose, because you have s-off. I sadly don't have enough experience with fastboot to be able to give you an easy guide to flashing cwm onto your phone though, but I hope this helps you at least somewhat.
EDIT: I just realized everything I said now doesn't matter since you're not on hboot 1.5 anymore...sorry about that. reaper24 gave you a link to cwm 4.0.1.4 in post #8 in this thread. Stop using TWRP 1.3, there's already a TWRP 2 specifically for EVO 3D and even the latest TWRP has been having issues. CWM has been completely stable for me on every HTC phone I've ever used (Hero CDMA, EVO 4G and now currently the EVO 3D). CWM 4.0.1.4 is in post #8 of this thread as an attachment (it's a small link in between reaper's post and his signature)
Click to expand...
Click to collapse
Cwm is the best so far no issues,
reaper24 said:
Cwm is the best so far no issues,
Click to expand...
Click to collapse
i have the clockwork mod from your link downloaded. That one i have to flash via cmd right? im having trouble getting any commands to work on either pc. However i did get qtadb to work on one of them im able to run all the same commands from the shell on it correct? nevermind on this i dont think this is made for that i may be wrong though.
If so i can flash recovery img then flash new rom boot img ect. .. i was told i have to do via pc in order to flash the boot partition cause thats whats causing my problem.
I have all the paths specified on my pc and everythign i need in my tools folder but cant cd to anyhting. i have read and read and read im pretty sure i have it all setup right but everytime i cd it says path not specified or not a batch file or soemthing.
mteezey said:
i have the clockwork mod from your link downloaded. That one i have to flash via cmd right? im having trouble getting any commands to work on either pc. However i did get qtadb to work on one of them im able to run all the same commands from the shell on it correct? nevermind on this i dont think this is made for that i may be wrong though.
If so i can flash recovery img then flash new rom boot img ect. .. i was told i have to do via pc in order to flash the boot partition cause thats whats causing my problem.
I have all the paths specified on my pc and everythign i need in my tools folder but cant cd to anyhting. i have read and read and read im pretty sure i have it all setup right but everytime i cd it says path not specified or not a batch file or soemthing.
Click to expand...
Click to collapse
If your on windows 7 just go to the folder platform tools hold down the shift key and right click on folder tell it to open a CMD prompt makes it easy.
reaper24 said:
If your on windows 7 just go to the folder platform tools hold down the shift key and right click on folder tell it to open a CMD prompt makes it easy.
Click to expand...
Click to collapse
fml lol. all this time. Now i gotta go back a couple post and re read what you said. Thanks i dont now why it wouldnt let me cd to the folder. it shows the same way i typed. Thanks alot hopefully i can get this now.
mteezey said:
fml lol. all this time. Now i gotta go back a couple post and re read what you said. Thanks i dont now why it wouldnt let me cd to the folder. it shows the same way i typed. Thanks alot hopefully i can get this now.
Click to expand...
Click to collapse
ok im so close yet so far. When trying to flash the recovery img it says
sending 'recovery
okay
writing recovery
failed(remote:not allowed)
i have twrp on here now is there anyway for me to wipe the boot partition and reflash that then my rom. sorry i know im asking questions i have read the answers to i have just read so much over the past 30-40 hours. actually cwm has a format boot option in it right?
mteezey said:
ok im so close yet so far. When trying to flash the recovery img it says
sending 'recovery
okay
writing recovery
failed(remote:not allowed)
i have twrp on here now is there anyway for me to wipe the boot partition and reflash that then my rom. sorry i know im asking questions i have read the answers to i have just read so much over the past 30-40 hours. actually cwm has a format boot option in it right?
Click to expand...
Click to collapse
Make sure the old recovery isn't still on the sd card like the recovery.img. Then try again. Your close man
reaper24 said:
Make sure the old recovery isn't still on the sd card like the recovery.img. Then try again. Your close man
Click to expand...
Click to collapse
i know right. I think what it might be is something i saw earlier about since i flashed the PG86IMG and it took revolutionary off my hboot that i no longer have fastboot. I tried to run some other commands and got the same thing. So for the hell of it i tried to run revolutionary from hbootand fastboot and it just waits for device. But then when i reboot the phone it will recognize it, but it doesnt stay long enough to run revolutionary.No i just have to remember which pg86img it was that made my phone just stay at the white screen so i can run revolutionary. lol
I am an unfortunate rookie, and have made mistakes, hence the name. I want to return my phone to stock from htcdev unlock, s-on, hboot 1.5. with a boot loop on meanom ICS for the evo 3d. I have tried to use older ruu shooters. Relock with fastbot oem lock, and then pg86img. However with the bootloop I can not access anything unless I unlock again, and then go into recovery. This is all that I can think of at the moment that might help.
Kill the rookie!!! PLEASE HELP!!
I had much the same problem with my cdma, hboot 1.5, S-On shooter. When I was S-On none of the ICS roms would work. The all bootlooped on me. If you follow the rooting method found here on xda, it will get you back to a stock Rooted GB Rom.
go into hboot -> fastboot USB-> run command dos -> fastboot cwm-4.0.1.4-shooter.IMG -> flash the 2.17 firmware-> enjoy.
I had to S-off with Juopunutbear, then re-run that root/flash to get past the bootloops.
Sent from my Shooter using xda app-developers app
Unfortunately I have tried that and it still is not working.
My only suggestion would be to try it a few times, other then that, its above my head.
Sent from my shooter using xda app-developers app
rookiemistake said:
I am an unfortunate rookie, and have made mistakes, hence the name. I want to return my phone to stock from htcdev unlock, s-on, hboot 1.5. with a boot loop on meanom ICS for the evo 3d. I have tried to use older ruu shooters. Relock with fastbot oem lock, and then pg86img. However with the bootloop I can not access anything unless I unlock again, and then go into recovery. This is all that I can think of at the moment that might help.
Kill the rookie!!! PLEASE HELP!!
Click to expand...
Click to collapse
Have you tried one of the ruu exe files that you run from your computer? If you are trying to go stock, you should be able to relock the bootloader and run the ruu and that's it.
Sent from my ICS 3VO with Tapatalk 2
First of all I want to thank everyone that has been attempting to assist me with my problem. I have tried to relock since I am on htcdev unlock and then run an ruu force via my computer. I get an installation aborted error when trying to flash pg86img via recovery. I don't know what else to say.
You can't flash a bootloader zip from recovery. You have to flash it from hboot. Also make sure the zip is named correctly "PG86IMG.zip" without the quotes. Also make sure the zip is on the root of your sd as in not in any folders. Once you've named the zip correctly and placed it correctly then power off the phone. Hold down the volume down button and tap the power button. You should boot into the bootloader wait until the phone recognizes the zip and follow the on screen instructions. Hopefully this helps.
#Root-Hack_Mod*Always\=LTE
Thank you again. I tried your directions, it did recognize the pg86img. However it did not give me any instructions to follow. It did however allow me to be able to a partial stock state. My software version is still on the teamgenesis sense v2.9 cdma. Although I do like some of the features on this rom, I would still like to be able to get the OTA of ICS when it is released. Any suggestions?
rookiemistake said:
Thank you again. I tried your directions, it did recognize the pg86img. However it did not give me any instructions to follow. It did however allow me to be able to a partial stock state. My software version is still on the teamgenesis sense v2.9 cdma. Although I do like some of the features on this rom, I would still like to be able to get the OTA of ICS when it is released. Any suggestions?
Click to expand...
Click to collapse
To get the ota release (if it ever comes ) I do believe you will need to be locked and running the existing gingerbread rom. While I am not positive, I think the system uses the props file to determine if an update is applicable, and it will likely not recognize the teamgenesis rom version as being upgradeable.
Now I will likely get flames for saying this, but if you want to put the meanrom v2.4 of ICS on the phone, it can be done with s-on, you just need to follow the correct process. I ran that rom for a while, and it is very stock like, stable, and has a few enhancements that you will not find on a non-rooted stock rom. I never found anything wrong or not working with that rom.
To get it to load, first I downloaded flashimagegui from market, put the meanrom zip file on the sd card and made sure I had a recovery that I could get into. I am using TWRP v2.1.1, lots of folks talk about others like ext4, and I am only going to say use whichever you like, after all it is your phone.
Then with the phone unlocked via the htc method, I started the flashimage app, and browsed to the meanrom file. It extracted the kernel and flashed it. Once that was done, with clear cache buttons selected, rebooted to recovery, and used the install menu selection of TWRP to again flash the same rom file. Once it flashed the file, selected clear cache and dalvik just to be safe, selected reboot system, and it worked great.
Have a great weekend.
So, apparently I am still doing something wrong. I have put the pg86img on the root, relocked to the bootloader, and let it run it's course. However, it will get through with reading it and stops and does not finish anything with loading the system information. I have also tried to run the ruu via usb connection. I keep running into a c++ issue saying runtime error. I have wiped everything and thankfully I did make a backup of the rom and other information that I was runing so I can currently fall back on that.
I am on hboot 1.5, 2.17, and teamgenesis ICS rom for evo 3d.
Apparently there have been rumors that Sprint has finally released the ICS OTA, not that it really matters anymore, but I have run into a few interesting glitches, such as WIFI not staying connected while asleep or disconnecting.
If I have to I am willing to pay to do a netmeeing with someone in order to be able to fix this.
Sorry if it sounds like I am getting frustrated, but I have tried every walkthrough that I have found and have not had any luck with any of them.
Please help.
I forgot to say I am s-on
Hi,
I am new here and this is my first post so forgive me if starting a new thread for this topic was wrong but I found my own situation slightly different from the others here who had the same problem.
I have a gsm unlocked rezound and was trying to get rid of the unknown sim error message at lock screen. I followed the steps mentioned on this thread --> http://forum.xda-developers.com/showthread.php?t=1882355. I rooted the phone, downloaded the apk. Deleted the .odex file and replaced the existing apk with the downloaded one and rebooted. Now, I am stuck at the lock screen with no icons. But for the other people who faced similiar issue, they were able to open the home screen. I can't. I can see pop ups for sms/mail. I get ring when a call comes in but I cant pick. I tried hard reset. Tried booting without sim/sd card. Still no luck. I tried connecting the phone to my pc but now my pc wont recognise the phone when its connected. I can see icon on top of the phone which says USB connected and I also see sync icon, but it will not go any further. I dont know how to get into the phone's menu now.
I may have bitten more than I can chew, silly me :crying:
If you guys can help me in any way, I would appreciate that a lot.
OS : 4.0.3 ICS Running HTC Sense 3.6.
A quick fix:
http://forum.xda-developers.com/showthread.php?t=2017932
Flash my debloater, choosing the Sense option(will be brought to a widget removal screen if you don' use them all) & AOSP lockscreen. Disadvantage to that though, you will have to unlock to see the caller id when it rings.
Snuzzo said:
A quick fix:
http://forum.xda-developers.com/showthread.php?t=2017932
Flash my debloater, choosing the Sense option(will be brought to a widget removal screen if you don' use them all) & AOSP lockscreen. Disadvantage to that though, you will have to unlock to see the caller id when it rings.
Click to expand...
Click to collapse
Thank you for the quick response. I have downloaded the file. I know this sounds stupid but I am a real rookie. I don't know how to do the flashing or how to get to the AOSP lock screen. If you could guide me through the process or maybe give me a link where I can learn it myself, it would be great.
Essentially since you already have rooted, you will(should) also have a custom recovery (TWRP, AmonRa, CWM). Install it as you would a regular rom but without any wipes until after flash of the zip. Dependent on which recovery you will want to look up their FAQ/QnA on how to wipe dalvik/cache.
Once you get inside the script, you will see what I meant by "Choose Sense & AOSP Lockscreen".
Snuzzo said:
Essentially since you already have rooted, you will(should) also have a custom recovery (TWRP, AmonRa, CWM). Install it as you would a regular rom but without any wipes until after flash of the zip. Dependent on which recovery you will want to look up their FAQ/QnA on how to wipe dalvik/cache.
Once you get inside the script, you will see what I meant by "Choose Sense & AOSP Lockscreen".
Click to expand...
Click to collapse
Yes the phone was rooted, but I used a rooting software from google apps from the phone. After I downloaded that app, it rooted the phone and brought in an extra icon. I remember it as SU root something, but I didnt do it from the pc. So I dont have any recovery on the pc. I used to sync the phone with htc sync. Unfortunately, right now, my pc wont recognise the phone. I tried root explorer for android from pc, it wont recognise the device. HTC sync too will not. But my phone seems to know when a USB is connected, it brings the usb icon on top but thats about it. ((
Ok, best suggestion at this point is to follow the instruction in the OP for installing TWRP in the Rezound development section.
Snuzzo said:
Ok, best suggestion at this point is to follow the instruction in the OP for installing TWRP in the Rezound development section.
Click to expand...
Click to collapse
Could you kindly provide me a link to the right topic. Do you think my phone is beyond repair ? Have I bricked it ?
I am running 4.0.3 ICS on Sense 3.6
http://forum.xda-developers.com/showthread.php?t=1902381
You are far FAR from being bricked. Softbricked yes, hardbricked no.
Snuzzo said:
http://forum.xda-developers.com/showthread.php?t=1902381
You are far FAR from being bricked. Softbricked yes, hardbricked no.
Click to expand...
Click to collapse
Thank you for the help buddy. I am glad you said its not. I dont know what I would have done if it had. This is my first android phone and I took it a week back. I was beginning to miss my iPhone . Unfortunately the link you provided wont help me because I have no way of restarting phone other than by removing battery. Even when in fastboot, the pc does not recognise the device even when device shows fastboot usb. I doubt if I can get past step 1 in that link.
I found that I am on Vigor H Boot 2.27.000 and Radio 2.22.10.0803r with S-ON. I tried to turn S-Off after reading and educating myself on android from this forum till now. But even to S-Off, I need to be able to enable USB in debug mode which I am not able to. Any suggestions ?
Device still not fixed
hi,
I took the phone to a couple of places to check if it can be fixed, No one was able to fix it thus far, Any other advice or suggestions to fix this would be great. Any admins/mods have something to add ? Please, I am desperate to fix this phone. Anyway of doing this ?
Have you tried flashing a different rom?
If he's S-on and locked, he can simply flash the latest RUU can't he(just to get the phone working again). From there someone can help him set up adb, and s-off.
Sent from my ADR6425LVW using xda app-developers app
From what they posted, somehow they don't have a custom recovery even though they are rooted?
Can you put a PH98IMG.zip file of a recovery (either Amon Ra or TWRP) on your SD card and flash it in hboot? Then flash a custom ROM the same way from recovery.
You can take the SD card out and mount it on your pc and use your pc to copy over the recovery PH98IMG.zip file.
And oh yeah, I see what Obaterista... was saying. You should be able to flash the latest RUU from hboot. Here's a link for it:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
That's global too, which seems to be what you'll need.
jon7701 said:
Have you tried flashing a different rom?
Click to expand...
Click to collapse
Yes I have vigor, tried AmonRa, that did not work mate. It starts fastboot, gets stuck @ unpacking PH98IMG.diag and then nothing happens.
Obaterista93 said:
If he's S-on and locked, he can simply flash the latest RUU can't he(just to get the phone working again). From there someone can help him set up adb, and s-off.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
The bootloader screen says S-On. On top it says ***Tampered*** and below it ***UNLOCKED***.
feralicious said:
From what they posted, somehow they don't have a custom recovery even though they are rooted?
Can you put a PH98IMG.zip file of a recovery (either Amon Ra or TWRP) on your SD card and flash it in hboot? Then flash a custom ROM the same way from recovery.
You can take the SD card out and mount it on your pc and use your pc to copy over the recovery PH98IMG.zip file.
And oh yeah, I see what Obaterista... was saying. You should be able to flash the latest RUU from hboot. Here's a link for it:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
That's global too, which seems to be what you'll need.
Click to expand...
Click to collapse
Yes I rooted from a tool I found on android market. Noob me. So I do not have a recovery. I had downloaded the PH98IMG.zip and put it in my sd card and tried. The recovery starts and then shows a red exclamation and then nothing happens.
I was just trying different pages for help. Someone has mentioned that I should add the PH98IMG.zip as just PH98IMG and I shud not add the .zip. Thats the only thing left to try. I will post what happens when I do that.
lllR2-D2lll said:
Yes I have vigor, tried AmonRa, that did not work mate. It starts fastboot, gets stuck @ unpacking PH98IMG.diag and then nothing happens.
The bootloader screen says S-On. On top it says ***Tampered*** and below it ***UNLOCKED***.
Yes I rooted from a tool I found on android market. Noob me. So I do not have a recovery. I had downloaded the PH98IMG.zip and put it in my sd card and tried. The recovery starts and then shows a red exclamation and then nothing happens.
I was just trying different pages for help. Someone has mentioned that I should add the PH98IMG.zip as just PH98IMG and I shud not add the .zip. Thats the only thing left to try. I will post what happens when I do that.
Click to expand...
Click to collapse
What you'll have to do is relock your boot loader, flash the RUU and then unlock again. From there you should be able to flash a recovery and flash a rom.
Sent from my ADR6425LVW using xda app-developers app
My phone is also soft bricked. I relocked the phone and now it just sits in hboot and won't do anything no matter if I yet to flash the ruu zip file or use the exe ruu.
Currently
Relocked
Hboot 2.10.0000
Believe I am 4.03.605.2 main version, at least that's what the exe file said.
I'm pulling my hair out just trying to any software installed. Help please!
Sent from my SCH-I535 using xda app-developers app
1967ls2 said:
My phone is also soft bricked. I relocked the phone and now it just sits in hboot and won't do anything no matter if I yet to flash the ruu zip file or use the exe ruu.
Currently
Relocked
Hboot 2.10.0000
Believe I am 4.03.605.2 main version, at least that's what the exe file said.
I'm pulling my hair out just trying to any software installed. Help please!
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Are you trying with the stock ROM ? If ure saving stock ROM as PH98IMG.zip, then try PH98IMG without the .zip typed in.
Obaterista93 said:
What you'll have to do is relock your boot loader, flash the RUU and then unlock again. From there you should be able to flash a recovery and flash a rom.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Thanks a tonne. That helped. I am back in the menu now. I am so grateful for ure help. But my problems dont seem to end just yet. Now, my htc sync wont detect the phone. The phone is relocked. I will try unlocking and see if it works, but is that the cause ?
lllR2-D2lll said:
Are you trying with the stock ROM ? If ure saving stock ROM as PH98IMG.zip, then try PH98IMG without the .zip typed in.
Click to expand...
Click to collapse
I'm trying to install any Rom. I find can of it is ics or gb. Nothing will load.
Sent from my SCH-I535 using xda app-developers app
1967ls2 said:
I'm trying to install any Rom. I find can of it is ics or gb. Nothing will load.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I am no expert to give u any suggestions but maybe if you could explain how it got bricked in the first place, someone might be able to give u a better solution mate.
I've been trying to root my EVO 4G LTE using various guides from this board, and I'm not having a lot of luck. I have HBOOT 2.09 and it's S-ON. It seems like the easiest way to root the device is to go S-OFF, but then it appears that the device needs to be rooted to get S-OFF. So I'm a little confused at this point. I've unlocked the bootloader and installed TWRP, but when I try to install the SuperSU root utility it gives me an error about mounting partitions and fails. My bootloader screen also displays "TAMPERED" which seems to be a problem but I'm not having a lot of luck finding a way to resolve it.
So... can anyone tell me what my next step is?
Thanks in advance.
Are you using Facepalm, Moonshine, or DirtyRacun? You haven't really provided enough details to help, at this point. What's your software version? I assume you're running the stock ROM?
I was running the stock ROM, I think it was 3.16. I tried using Facepalm but again it seems like it needs root to work which I haven't been able to achieve just yet. I tried installing the ROM from this thread through TWRP but it just hangs on the HTC screen so I'm not sure what's on there now. I can still get into the bootloader and recovery though.
You can't use Facepalm on 3.16 software. Use Moonshine.
Try flashing this stock rooted to get back to a working state: http://d-h.st/users/Captain_Throwback/?fld_id=10308#files
You may need to fastboot flash the boot.img to make sure it fully boots.
OK, I downloaded that ROM and extracted the boot.img. I booted the phone into the bootloader and ran "fastboot flash boot boot.img". It seems to have completed correctly, no errors at least, but now the phone just sits at the HTC screen with the red text at the bottom. Clearly I'm doing something wrong...
Did you flash the ROM too? Or did it reboot on you when you tried?
I just did the boot.img. Should I also do "fastboot flash zip 3.16.651.3_stock_rooted_odex_CPTB.zip"?
davel23 said:
I just did the boot.img. Should I also do "fastboot flash zip 3.16.651.3_stock_rooted_odex_CPTB.zip"?
Click to expand...
Click to collapse
You have to flash the ROM in recovery.
Ok, so I went into recovery which is still TWRP, adb pushed that ROM to the phone then tried to install it. It gives a bunch of error messages about being unable to mount various items, says it's unable to find path for partition [name of the zip] and fails.
Thanks for your help and patience so far...
You do not extract the file, leave it as a zip and do not open it. Move it to your SD card while in fastboot (mount sd) and from there use twrp and select the correct zip to flash. But above all... DO NOT EXTRACT THE FILR
Sent from my EVO using xda app-developers app
roscoepcoltra said:
You do not extract the file, leave it as a zip and do not open it. Move it to your SD card while in fastboot (mount sd) and from there use twrp and select the correct zip to flash. But above all... DO NOT EXTRACT THE FILR
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
He's S-on. He can't flash kernels from recovery with Hboot 2.09.
davel23 said:
Ok, so I went into recovery which is still TWRP, adb pushed that ROM to the phone then tried to install it. It gives a bunch of error messages about being unable to mount various items, says it's unable to find path for partition [name of the zip] and fails.
Thanks for your help and patience so far...
Click to expand...
Click to collapse
I don't understand what you're doing here. Boot to recovery, mount storage, copy the ROM zip over, and then flash it.
Ok, so I mounted storage from recovery, or least I tried to, my PC said it needed to be formatted. So I did so, copied the file over and flashed it which completed successfully this time. My phone now boots properly, I'll give Moonshine a try now. Hopefully I won't need to bug you again, thanks for all the help.
Captain_Throwback said:
You can't use Facepalm on 3.16 software. Use Moonshine.
Try flashing this stock rooted to get back to a working state: http://d-h.st/users/Captain_Throwback/?fld_id=10308#files
You may need to fastboot flash the boot.img to make sure it fully boots.
Click to expand...
Click to collapse
my friend wants to buy im rooted unlocked evo. it is on viper now can I flash this an it will be stock rooted ?
Tigerstown said:
my friend wants to buy im rooted unlocked evo. it is on viper now can I flash this an it will be stock rooted ?
Click to expand...
Click to collapse
Yes.
Captain_Throwback said:
Yes.
Click to expand...
Click to collapse
S-on Ok? Or do I need to moonshine first?
Tigerstown said:
S-on Ok? Or do I need to moonshine first?
Click to expand...
Click to collapse
You need to use Flash Image GUI or fastboot flash the kernel.
FinZ28 said:
You need to use Flash Image GUI or fastboot flash the kernel.
Click to expand...
Click to collapse
Ok I got that app I use that. An for my other one I'm selling is s-off so I can just flash this on that one..it's been fun on the Evo with the helpful fellow xda's on the jewel. But the wife's work now cover half your bill if you have verizon so we had no choice
Captain_Throwback said:
Yes.
Click to expand...
Click to collapse
Omg I just moonshine(easy thing I ever did) this phone my wife didn't want s-off before. So now I'm s-off I will just flash thanks once again throwback. Hope there is someone in vzw htc one thread that breaks down firmware like you.
Sent from my EVO using XDA Premium 4 mobile app
I'm having a little trouble with Moonshine. It reboots the phone a couple of times, gets to step 3 then just keeps printing periods in the program window. I've been reading through the Moonshine thread and it seems other people have had the same problem, but I haven't seen a solid fix yet. Anyone know what I need to do or should I stick with the Moonshine thread?
Please help. I have unlocked this phone through HTC Dev. I have flashed a custom recovery. Somewhere through this process, the original installation of the factory rom from VM was deleted. That doesn't bother me because I was never going back to it anyway, but If I had it right now, I wouldn't be here. I have tried to use the RUU exe in fastboot and the RUU zip in recovery from here. Neither will install, exe throws errors and the zip returns [bad]. I have also tried the [ROM] NegaLite-BluRom-JCFunk | 2.95 | Sprint/VM | Sense/Apex/Nova | 03/25/2014. This eventually installed, but will not boot even with installing boot.img separately. I followed all directions to the best of my ability, but by no means am I saying I did correctly, but I am pretty sure I did. So to recap - I have whats in the title, but no rom whatsoever installed that can be accessed. Any takers?
Some more info please, hboot version? Which recovery. s-on makes things harder.
To flash stock need to be relocked, stock will not flash from recovery.
If you put rom.zip, stock zip, in root of sdcard and rename to PG86IMG.zip. hboot will flash automaticly.
Or if you have a copy of the custom recovery img file on your computer, you can do a fastboot command that will let you boot from it and give it full write access.
fastboot boot recovery.img, then you can retry to flash negalite
img must be in directory you use fastboot in.
Philz recovery not working well for 3d, I use 4ext or my unofficial twrp.
Before I proceed in explaining anything, please let me Thank You JCFunk for lending me a hand in my endeavors. This is my first crack at a HTC device. So I'm a newb at locks, hboots, and HTC specifics. So, Thank You!
I scanned through a lot of information and I moved to quickly, thinking I would ace this project and not particularly following a guide step by step. I know I should just wire trick this phone. I am wanting to get to hboot 1.40 and use Revolutionary to S-OFF. Once that is achieved load a kitkat rom. This is just a project, not used for daily phone use - no service.
jcfunk said:
Some more info please, hboot version? Which recovery. s-on makes things harder.
To flash stock need to be relocked, stock will not flash from recovery.
If you put rom.zip, stock zip, in root of sdcard and rename to PG86IMG.zip. hboot will flash automaticly.
Click to expand...
Click to collapse
I tried this step first and it returned:
Main Version is older.
Update Fail!
Press <POWER> to reboot.
Would I be correct to say if I flashed the SetMainVersionLOW.zip that this method would likely work?
Also, if I am overcomplicating this(other than wire-trick) and there is an easier method, please advise.
oD33z said:
Before I proceed in explaining anything, please let me Thank You JCFunk for lending me a hand in my endeavors. This is my first crack at a HTC device. So I'm a newb at locks, hboots, and HTC specifics. So, Thank You!
I scanned through a lot of information and I moved to quickly, thinking I would ace this project and not particularly following a guide step by step. I know I should just wire trick this phone. I am wanting to get to hboot 1.40 and use Revolutionary to S-OFF. Once that is achieved load a kitkat rom. This is just a project, not used for daily phone use - no service.
I tried this step first and it returned:
Main Version is older.
Update Fail!
Press <POWER> to reboot.
Would I be correct to say if I flashed the SetMainVersionLOW.zip that this method would likely work?
Also, if I am overcomplicating this(other than wire-trick) and there is an easier method, please advise.
D33z
Click to expand...
Click to collapse
How good are you with linux, or do just use windows? Never did wire trick myself, I've always done Unknownforce hboot downgrade. Which I can now do in about 15 min.
s-off not required, there's many way to bypass unlocked limitations.
Your main var is to high because htc never released a current ruu, so the ota pushed version higher but no ruu to match.
what can I help you do?
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
jcfunk said:
Philz recovery not working well for 3d, I use 4ext or my unofficial twrp.
Click to expand...
Click to collapse
Does your unofficial twrp support SELinux? I am assuming it does but just checking. Is it available for download and if so where?
oD33z said:
Does your unofficial twrp support SELinux? I am assuming it does but just checking. Is it available for download and if so where?
Click to expand...
Click to collapse
here's the thread
http://forum.xda-developers.com/showthread.php?t=2831444
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
jcfunk said:
How good are you with linux, or do just use windows? Never did wire trick myself, I've always done Unknownforce hboot downgrade. Which I can now do in about 15 min.
s-off not required, there's many way to bypass unlocked limitations.
Your main var is to high because htc never released a current ruu, so the ota pushed version higher but no ruu to match.
what can I help you do?
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
Click to expand...
Click to collapse
I am great with linux, but was under the assumption it needed to be burned to cd and that USB was not an option, please advise if not the case. I have read a ton and I remember reading about Unknownforce, but cant remember if thats the case or not.
Off topic: I learned from you that it has to be locked to go stock, but does it need to be unlocked to flash your rom or locked as well?
Unlocked for custom, locked for stock.
Here is unknownforce ultimate tool,
there was a live cd version made for windows users scared of linux.
I use tiny core linux for this, Ubuntu tries to mount all the partitions and you only have a 5 second window when they are writeable. I have used Ubuntu, at first, but preferred tinycore.
But first you are going to need to get stock.zip to install.
http://forum.xda-developers.com/showthread.php?t=1653777
I would do fastboot boot recovery.img
Then install negalite, so atless you can boot the phone
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
---------- Post added at 12:37 AM ---------- Previous post was at 12:24 AM ----------
here is 4ext recovery I would use this one first until you get used to things, best recovery for 3d.
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
Is 4ext > TWRP unofficial? I am currently on your unofficial TWRP and installing the latest negalite.
oD33z said:
Is 4ext > TWRP unofficial? I am currently on your unofficial TWRP and installing the latest negalite.
Click to expand...
Click to collapse
did you fastboot boot?
There are several custom recoveries out there.
Here is thread for 4ext
http://forum.xda-developers.com/showthread.php?t=1408936
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
What I meant was, in your opinion, is the 4ext a better recovery than the unofficial TWRP?
During the install of Negalite at the point of -Setting Up Kernel Over-Clock Settings
under this it reads: assert failed: write_raw_image("/tmp/newboot.img","boot")
Is this a red flag of something not going right in any way?
After this I click Next>Recovery>Wipe Dalvik>Reboot and it boots into Fastboot. Whats happening at this point?
Since I am basically starting from scratch and the end goal is to have a kitkat rom and possibly S-OFF(if its a must to do so).
What all needs to be done as far as formatting, tweaks, or anything else to achieve the best performance, space, or anything you can think of?
Thats if you dont mind sharing. I appreciate your time and if I can be of service to you in any way, I will.
I am currently on the 4ext recovery with 1GB sd-ext 0 swap and formatted Ext4.
fastboot boot recovery.img
flashrom.zip from recovery
reboot, wipe dalvik, reboot
Negalite.zip installed with no errors whatsoever.
Thank You.
Beautiful smooth running rom btw.
Does all that above sound like I did the right things as for setting up and installing?
4ext is most stable, the unofficial has new features like f2fs and selinux, but 95% stable.
fastboot boot recovery.img is an old work around, also used to flash boot.img with fastboot. That is ok with roms that include a whole boot.img but roms like mine use a dynamic boot.img. Basically the installer makes the boot.img using your choices.
From what I know about Kitty kat I think you need to downgrade hboot or be s-off. Not sure I've stayed on ics for stability because I still use this phone. Also there is a new version of negalite on svn, just takes hours for me to upload a zip version.
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
Revision 7
Are you sure this is the latest?
oD33z said:
Revision 7
Are you sure this is the latest?
Click to expand...
Click to collapse
Lol, yes since I updated it a few weeks ago
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
I should have worded that different really, the revision numbers threw me, I honestly was just making sure I was in the right place. 48mb smaller, anything stripped?
jcfunk said:
Some more info please, hboot version? Which recovery. s-on makes things harder.
To flash stock need to be relocked, stock will not flash from recovery.
If you put rom.zip, stock zip, in root of sdcard and rename to PG86IMG.zip. hboot will flash automaticly.
Or if you have a copy of the custom recovery img file on your computer, you can do a fastboot command that will let you boot from it and give it full write access.
fastboot boot recovery.img, then you can retry to flash negalite
img must be in directory you use fastboot in.
Click to expand...
Click to collapse
I tried installing your new negalite the same way as I do the old version and at the end of the install procedure I get an error about set permissions. After that - reboot, wipe dalvik, reboot - it just reboots into recovery. I tried many times with SmartFlash enabled and disabled. I go back and install r121 with no problems.
oD33z said:
I tried installing your new negalite the same way as I do the old version and at the end of the install procedure I get an error about set permissions. After that - reboot, wipe dalvik, reboot - it just reboots into recovery. I tried many times with SmartFlash enabled and disabled. I go back and install r121 with no problems.
Click to expand...
Click to collapse
Here. Try this
https://www.androidfilehost.com/?fid=23578570567720169
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer