Hi all,
I am trying to flash another JB rom the other day.
I just turned off the Prime completely, and try to enter the recovery mode by holding power and down, then up within 5 seconds...
It then showed the Android laying down with the heart opened:silly:
I have to holding power to restart and boot normally into the rom.
I didn't do any wipe or flashing at all...
Later, I restart and now totally stuck on the splash screen with "ASUS", not even able to boot in to the rom I'm currently using...
Any help?!
Thanks
We need more information. What ROM were you using before this happened, what ROM did you try to flash, and is your device unlocked?
McJesus15 said:
We need more information. What ROM were you using before this happened, what ROM did you try to flash, and is your device unlocked?
Click to expand...
Click to collapse
He has to be unlocked otherwise he wouldn't have had a different rom on there or recovery before.
Hold down the power button and volume down button for 10 seconds, keep holding them until the screen with all the icons on it appear (recovery, wipe, usb icon etc) look up the top at the writing and at the end of the line with bootloader in it is a long number that starts with 9 or a 10. What number is it ?
flumpster said:
He has to be unlocked otherwise he wouldn't have had a different rom on there or recovery before.
Click to expand...
Click to collapse
Considering he says he got Dead Andy that makes it possible that he was on stock and just tried to use stock recovery to flash a custom ROM. I understand your point, the OP is just lacking details.
McJesus15 said:
We need more information. What ROM were you using before this happened, what ROM did you try to flash, and is your device unlocked?
Click to expand...
Click to collapse
Hi McJesus, before this happened, I was using this
http://forum.xda-developers.com/showthread.php?t=1911024
and I am trying to shift to shis one
http://forum.xda-developers.com/showthread.php?t=1982156
I was trying to enter the recovery mode to prepare wipe and flash procesure, I remember I used to use TWRP, but failed, it stopped at the "dead Android" icon, and I could get out only by restarting.
Then I researched and installed Goo and Rom manager, yet, just installed those, not done any flashing or wipe whatsoever.
Then start doing recovery mode, failed, normal boot, totally hanged, on the splash screen with "Asus"...I coudle restart with holding the power buttom though.
The device is unlocked.
Thanks for helping,
flumpster said:
He has to be unlocked otherwise he wouldn't have had a different rom on there or recovery before.
Hold down the power button and volume down button for 10 seconds, keep holding them until the screen with all the icons on it appear (recovery, wipe, usb icon etc) look up the top at the writing and at the end of the line with bootloader in it is a long number that starts with 9 or a 10. What number is it ?
Click to expand...
Click to collapse
I was able to get to the screen that you mentioned about...But after that I normal restarted and attempted entering recovery, totally failed and only made to the splash screen.:silly:
Thanks,
garykwan said:
I was able to get to the screen that you mentioned about...But after could normal restart and attepmted recovery entering, now totally failed but to the splash screen.:silly:
Thanks,
Click to expand...
Click to collapse
It looks like you was on the Jellybean bootloader before.. I'm out and about at the moment but if someone hasn't helped you by later I will knock up some instructions for you to try.
flumpster said:
It looks like you was on the Jellybean bootloader before.. I'm out and about at the moment but if someone hasn't helped you by later I will knock up some instructions for you to try.
Click to expand...
Click to collapse
Yes, I believed so.
Thank you so much for your kindly help.:good:
Related
Hello,
about 2 hours ago I decided that I would unlock my device (before that I read maximum informations that I could). Unlocking went fine and I also installed TWRP 2.1.3 (through ViperMod). So far so good.
Then I made backup in TWRP in case something goes wrong. I was going to try AOKP v40 so I downloaded it via goo manager and then I flashed it in TWRP Install option (and also installed gapps) and wiped cache. Device rebooted and I was stuck at AOKP boot animation for about 15 minutes when I decided to recover back. So I rebooted, restored and rebooted.
Now I'm stuck at first boot logo (eee pad). When I try to do VolDown+Power to get into recovery it doesn't ask for VolUp, but goes straight to selection of Wipe or USB. When I select fastboot or wait 10 secs device frozes. (I haven't tried wipe, just in case it would be needed to unbrick).
I read thread about unbricking (http://forum.xda-developers.com/showthread.php?t=1514088) and to me it seems like option 3, but I don't see recovery option.
In device manager I have 'ASUS Fastboot Interface'.
Here's video how it looks like: http://www.youtube.com/watch?v=7BGd1PIVbn8
Please please could anyone help me?
Btw: Is there any chance to shut down? Holding power button just resets, so does pinhole... :/
qery said:
Hello,
about 2 hours ago I decided that I would unlock my device (before that I read maximum informations that I could). Unlocking went fine and I also installed TWRP 2.1.3 (through ViperMod). So far so good.
Then I made backup in TWRP in case something goes wrong. I was going to try AOKP v40 so I downloaded it via goo manager and then I flashed it in TWRP Install option (and also installed gapps) and wiped cache. Device rebooted and I was stuck at AOKP boot animation for about 15 minutes when I decided to recover back. So I rebooted, restored and rebooted.
Now I'm stuck at first boot logo (eee pad). When I try to do VolUp+Power to get into recovery it doesn't ask for VolUp, but goes straight to selection of Wipe or USB. When I select fastboot or wait 10 secs device frozes. (I haven't tried wipe, just in case it would be needed to unbrick).
I read thread about unbricking (http://forum.xda-developers.com/showthread.php?t=1514088) and to me it seems like option 3, but I don't see recovery option.
In device manager I have 'ASUS Fastboot Interface'.
Here's video how it looks like: http://www.youtube.com/watch?v=7BGd1PIVbn8
Please please could anyone help me?
Btw: Is there any chance to shut down? Holding power button just resets, so does pinhole... :/
Click to expand...
Click to collapse
Shouldn't it be volume and power down to get to the option to press volume up for recovery?
Are you familiar with fastboot flashing recoveries? Either way that will be helpful info for us to have.
Most important thing, this is no big deal at all, it's really a minor issue. Don't let yourself get stressed out over it, the community will make sure you're good to go.
CharliesTheMan said:
Shouldn't it be volume and power down to get to the option to press volume up for recovery?
Click to expand...
Click to collapse
Yes sure my bad, it was typo (I was kinda sleepy and tired when I was writing)
CharliesTheMan said:
Are you familiar with fastboot flashing recoveries? Either way that will be helpful info for us to have.
Click to expand...
Click to collapse
Nope, this is my first time flashing.
You say you dont see the VOL_UP message. From the video it looks like it is there. You just did not press it within 5 seconds.
Once it comes up, let go of the buttons ;p
leppie said:
You say you dont see the VOL_UP message. From the video it looks like it is there. You just did not press it within 5 seconds.
Once it comes up, let go of the buttons ;p
Click to expand...
Click to collapse
nope it's not there. I was holding voldown from the start and as soon as it should say 'press volup for recovery' (time 0:04) it jumps (skips 5 seconds of waiting) directly to wipe/fastboot options (wipe is one that is selected on video)
Ok so I managed to fix my problem thanks to hanzo001's thread (http://forum.xda-developers.com/showthread.php?t=1662158). Someone should add this instructions to the [HOW-TO] Unbrick your Transformer Prime (or not) thread.
qery said:
Ok so I managed to fix my problem thanks to hanzo001's thread (http://forum.xda-developers.com/showthread.php?t=1662158). Someone should add this instructions to the [HOW-TO] Unbrick your Transformer Prime (or not) thread.
Click to expand...
Click to collapse
glad it's fixed, im sure hanzo001 will appriciate a simple thanks on his thread too..and let others know it worked for you
Hello,
Last night I downloaded (from xda), and installed CM 10.1 on CWM 5.8.3.4...all seemed to go well, until I rebooted the system. Now my prime will not boot past the Eee Pad screen..I think it is because I didn't have a JB BL? But, I don't know how to get a JB BL.
I re-downloaded CM 9.1, and put it on m Micro SD card from my NOTE 2, but the Prime won't recognize the external SD in CWM.
How can I fix this?
Also, my PC will NOT recognize my prime at all, it doesn't even show up in the device manager...so I can do adb.
thanks!
no help
Can you get into fastboot?
Have you done nvflash?
Sent from my LT30p using Tapatalk 2
qery said:
Can you get into fastboot?
Have you done nvflash?
Sent from my LT30p using Tapatalk 2
Click to expand...
Click to collapse
i cant get into anything that has to use the computer because my tablet isnt even recognized in the device manager, ive tried different usb ports too.
i have not done nvflash, as i am not sure what that is.
cms062407 said:
i cant get into anything that has to use the computer because my tablet isnt even recognized in the device manager, ive tried different usb ports too.
i have not done nvflash, as i am not sure what that is.
Click to expand...
Click to collapse
You need access to fastboot and this is an easy fix.
Either try your prime in a different computer and see if you can get it to show up or it is possible that your cable is faulty and will need to get a new one off ebay.
flumpster said:
You need access to fastboot and this is an easy fix.
Either try your prime in a different computer and see if you can get it to show up or it is possible that your cable is faulty and will need to get a new one off ebay.
Click to expand...
Click to collapse
okay, ill try a new cable...i have one from my tf700t that i could try.
but, will the prime still be recognized by the pc even if i dont boot fully into the os on the prime? (since i cant boot into it right now)
cms062407 said:
okay, ill try a new cable...i have one from my tf700t that i could try.
but, will the prime still be recognized by the pc even if i dont boot fully into the os on the prime? (since i cant boot into it right now)
Click to expand...
Click to collapse
Hold down power button and volume down for 10-15 seconds until you get to the screen where there are icons on it (wipe, usb icon etc)
Use volume down to go to the usb icon and then press volume up. It will say entering fastboot mode and freeze on your screen. This is normal and you are in fastboot mode. Now go to device manager and see if you have any devices there.
flumpster said:
Hold down power button and volume down for 10-15 seconds until you get to the screen where there are icons on it (wipe, usb icon etc)
Use volume down to go to the usb icon and then press volume up. It will say entering fastboot mode and freeze on your screen. This is normal and you are in fastboot mode. Now go to device manager and see if you have any devices there.
Click to expand...
Click to collapse
lol, well, that worked. in m device manager it says "ASUS Android Bootloader Interface"
flumpster said:
Hold down power button and volume down for 10-15 seconds until you get to the screen where there are icons on it (wipe, usb icon etc)
Use volume down to go to the usb icon and then press volume up. It will say entering fastboot mode and freeze on your screen. This is normal and you are in fastboot mode. Now go to device manager and see if you have any devices there.
Click to expand...
Click to collapse
I just installed CWM Touch 5.8.1.8..now what must I do to get an OS back on here?
Thanks for your help too.....I never thought to try a new cord because the cord charged the prime fine...i figured it if the cord was bad it wouldn't even charge
cms062407 said:
I just installed CWM Touch 5.8.1.8..now what must I do to get an OS back on here?
Thanks for your help too.....I never thought to try a new cord because the cord charged the prime fine...i figured it if the cord was bad it wouldn't even charge
Click to expand...
Click to collapse
Personally I wouldn't even use cwm on the prime. Can you please tell me what the numbers are up the top of the screen when you get to the screen with the icons. It will either start with a 9 or a 10. Also tell me where your nvidia logo is. Bottom center or bottom right when you turn it on.
flumpster said:
Personally I wouldn't even use cwm on the prime. Can you please tell me what the numbers are up the top of the screen when you get to the screen with the icons. It will either start with a 9 or a 10. Also tell me where your nvidia logo is. Bottom center or bottom right when you turn it on.
Click to expand...
Click to collapse
what should I use? TWRP, or w/e its called haha...ill use either one, doesn't matter to me.
NVIDIA logo is bottom center
i have nothing on the device now...I wiped it clean...I actually got rid of CWM too..the only thing I can boot into is the bootloader now (with the USB symbol and WIPE DATA symbol)
cms062407 said:
what should I use? TWRP, or w/e its called haha...ill use either one, doesn't matter to me.
NVIDIA logo is bottom center
i have nothing on the device now...I wiped it clean...I actually got rid of CWM too..the only thing I can boot into is the bootloader now (with the USB symbol and WIPE DATA symbol)
Click to expand...
Click to collapse
You are on the ics bootloader at mo. Please take a look at this post. http://forum.xda-developers.com/showpost.php?p=35419142&postcount=5
That will get you up to jellybean bootloader and jellybean twrp. Make sure if you flash Cyanogenmod afterwards you flash one based on jellybean bootloader. I don't think the official cm is on jb bootloader yet but the unofficial one is.
flumpster said:
You are on the ics bootloader at mo. Please take a look at this post. http://forum.xda-developers.com/showpost.php?p=35419142&postcount=5
That will get you up to jellybean bootloader and jellybean twrp. Make sure if you flash Cyanogenmod afterwards you flash one based on jellybean bootloader. I don't think the official cm is on jb bootloader yet but the unofficial one is.
Click to expand...
Click to collapse
Okay, I am flashing the ICS TWRP...it seems like it may be "stuck" on the .bat file..it is just saying.... sending 'recover' (6340 kb)..it has been like this for 5 ish minutes now..
also, if it does install..how do I boot into TWRP? same as CWM?
cms062407 said:
Okay, I am flashing the ICS TWRP...it seems like it may be "stuck" on the .bat file..it is just saying.... sending 'recover' (6340 kb)..it has been like this for 5 ish minutes now..
also, if it does install..how do I boot into TWRP? same as CWM?
Click to expand...
Click to collapse
That should only take a few seconds to flash. Once it works correctly you would go in the same way as CWM.
I don't like the fact that it has stuck mid flash tho.
flumpster said:
That should only take a few seconds to flash. Once it works correctly you would go in the same way as CWM.
I don't like the fact that it has stuck mid flash tho.
Click to expand...
Click to collapse
just re-flashed...it flashed it...and rebooted it..but TWRM didn't start up...it is still at the Eee Pad screen....
cms062407 said:
just re-flashed...it flashed it...and rebooted it..but TWRM didn't start up...it is still at the Eee Pad screen....
Click to expand...
Click to collapse
It wouldn't go straight in. You would need to hold power and volume down and go in the way you would before.
there are also no numbers or anything up top when I re-boot..if I hold down power and vol- it goes straight into bootloader..no option to get into TWRP.
cms062407 said:
there are also no numbers or anything up top when I re-boot..if I hold down power and vol- it goes straight into bootloader..no option to get into TWRP.
Click to expand...
Click to collapse
What do you mean straight into bootloader? Do you mean where the icons are?
If so click the first one. Rck or something.
flumpster said:
What do you mean straight into bootloader? Do you mean where the icons are?
If so click the first one. Rck or something.
Click to expand...
Click to collapse
ya, it boots into the fast boot place....there are two icons...one is WIPE DATA and the other is the USB icon.
cms062407 said:
ya, it boots into the fast boot place....there are two icons...one is WIPE DATA and the other is the USB icon.
Click to expand...
Click to collapse
This isn't making much sense at the moment. The old way used to be to hold power and volume down and you would get a message saying press volume up within 5 seconds to get into recovery. The new way became that you had an icon in the same place as fastboot and wipe data that said rck and you would press up on that to get into recovery.
You are not even getting the press up to enter recovery any more before getting to the 2 icons ? I'm still a little bit worried about this flash failing earlier.
Hi,
I was just above to flash stock rom to receive JB update,
switched my desire then not able to boot into hboot, unable to boot into os.
led is turning on while attaching usb.
please help.
vipinlahoti said:
Hi,
I was just above to flash stock rom to receive JB update,
switched my desire then not able to boot into hboot, unable to boot into os.
led is turning on while attaching usb.
please help.
Click to expand...
Click to collapse
first question, can you boot to bootloader/fastboot?
w1040 said:
first question, can you boot to bootloader/fastboot?
Click to expand...
Click to collapse
No, cant,
no bootloader just led on when attaching cable.
and PC detects as "unknown device attached"
vipinlahoti said:
No, cant,
no bootloader just led on when attaching cable.
and PC detects as "unknown device attached"
Click to expand...
Click to collapse
I think your only option is to restore it via RIFF JTAG... I don't know another way...
vipinlahoti said:
Hi,
I was just above to flash stock rom to receive JB update,
switched my desire then not able to boot into hboot, unable to boot into os.
led is turning on while attaching usb.
please help.
Click to expand...
Click to collapse
Is ur device booting in Qualcomm diagnostic mode.....?
If ur phn does then there is a possibility of flashing stock Rom
If u don't know..just Google it.....!
Sent from my ST25i using Tapatalk 2
@ OP, did you charge it?
Sent from my awesome fridge
yes, from last 2 hrs its on charging.
I donno what is RIFF JTAG and Qualcomm diagnostic mode
googling it....
If you haven't done it yet, pull out the battery, put it back in and try to get into bootloader or recovery. (the pulling out the battery part is important)
by the way, what exactly is happening when you try to boot? please describe step by step what is happening. And what do you mean by boot "into hboot"?
And how did you try to go back to stock? Did you even get into the stock rom. Didn't you just forgot to flash the boot.img when going back to stock?
DeXeS said:
If you haven't done it yet, pull out the battery, put it back in and try to get into bootloader or recovery. (the pulling out the battery part is important)
by the way, what exactly is happening when you try to boot? please describe step by step what is happening. And what do you mean by boot "into hboot"?
And how did you try to go back to stock? Did you even get into the stock rom. Didn't you just forgot to flash the boot.img when going back to stock?
Click to expand...
Click to collapse
to flash a rom I
1. Switched off my phone,
2. hold power + vol down (to boot into bootloader recovery), just blank screen no boot.
3. hold power button + vol up, again just blank screen no boot.
4. when us connected led lights up, and PC detects as "unknown device found".
not booting at all.
vipinlahoti said:
to flash a rom I
1. Switched off my phone,
2. hold power + vol down (to boot into bootloader recovery), just blank screen no boot.
3. hold power button + vol up, again just blank screen no boot.
4. when us connected led lights up, and PC detects as "unknown device found".
not booting at all.
Click to expand...
Click to collapse
but did you remove the battery and put it back in or not? If so and it still does not want to go into bootloader, it really is bricked.. Bring it to a service center for repair..
DeXeS said:
but did you remove the battery and put it back in or not? If so and it still does not want to go into bootloader, it really is bricked.. Bring it to a service center for repair..
Click to expand...
Click to collapse
Tried already but no luck,
Damn mine is rooted and bootloader not sure whether they repair or not
vipinlahoti said:
Tried already but no luck,
Damn mine is rooted and bootloader not sure whether they repair or not
Click to expand...
Click to collapse
If its hard bricked ,they wouldn't no.
..
navmad
mate maybe the screen of your phone has the problem...thats why it shows only blank...
mhb92 said:
mate maybe the screen of your phone has the problem...thats why it shows only blank...
Click to expand...
Click to collapse
That depends, if the device doesn't even shake, then it's not the screen.
Sent from my awesome fridge
Guys, I dont think having any screen problem, bcoz, no vibration during powering on, just a blank screen btw I have given to service center,
just finger crossed
I was doing a backup with TWRP and everything seemed to go just fine. Then after a reboot i unlocked the phone to notice that it was leaving the lock-screen icons on the bottom of the page. I still had access to my notification bar and could clear notifications. Figuring that there had just been a mistake in the boot process, I held the power button to restart the phone. Well it never brought up my power menu to restart. Also instead of making me wait ten seconds until it flashed its lights and restarted, it just restarted in like 3 seconds. Now my phone is stuck on the HTC ONE screen and will not respond to anything including hold the power button.
My phone is rooted an s-off. I know that I have not posted at all on here, but I have been rooting and know how at least the basics on adb shell. I just have never had a phone lock up to this point. If I can at least get to recovery, I should have 2 or 3 backups to run. I just don't want to have to wait for the phone battery to die just to hope I can get to recovery.
TugboatTony said:
I was doing a backup with TWRP and everything seemed to go just fine. Then after a reboot i unlocked the phone to notice that it was leaving the lock-screen icons on the bottom of the page. I still had access to my notification bar and could clear notifications. Figuring that there had just been a mistake in the boot process, I held the power button to restart the phone. Well it never brought up my power menu to restart. Also instead of making me wait ten seconds until it flashed its lights and restarted, it just restarted in like 3 seconds. Now my phone is stuck on the HTC ONE screen and will not respond to anything including hold the power button.
My phone is rooted an s-off. I know that I have not posted at all on here, but I have been rooting and know how at least the basics on adb shell. I just have never had a phone lock up to this point. If I can at least get to recovery, I should have 2 or 3 backups to run. I just don't want to have to wait for the phone battery to die just to hope I can get to recovery.
Click to expand...
Click to collapse
Are you saying volume up + power button does not restart your phone nor does any help? Check if your phone is detected in computer and if so you can issue and adb reboot command
also since there is no removable battery HTC added a reboot function press home vol down and power that should do the trick
The phone is not detected by a computer, nor will it charge. Vol down and power is not cutting it off. Right now I am waiting for the battery to die so I can hopefully boot into recovery and do a restore.
Vol up + Power was the key. I was thinking it was volume down. Thanks for all your help
TugboatTony said:
The phone is not detected by a computer, nor will it charge. Vol down and power is not cutting it off. Right now I am waiting for the battery to die so I can hopefully boot into recovery and do a restore.
Click to expand...
Click to collapse
Its volume up mate + power not volume down
pradeepvizz said:
Its volume up mate + power not volume down
Click to expand...
Click to collapse
Hi Do you have a HTC one max stock Rom I could use??
Thanks
mini88448 said:
Hi Do you have a HTC one max stock Rom I could use??
Thanks
Click to expand...
Click to collapse
There have been lots of request for this, ill upload a stock rooted ROM soon.
pradeepvizz said:
There have been lots of request for this, ill upload a stock rooted ROM soon.
Click to expand...
Click to collapse
OMG THANK YOU SO MUCH!!!
:victory::victory::victory:
Just wanted to point out I ran into this issue also (Stuck on white HTC boot screen) after wiping my ROM and Vol UP + Power did the trick for me also (and then Vol Down + Power to get back to the bootloader).
i need help, guys
so attempting to install a new rom, i must have dont something wrong because now restarting the phone will leave me on the htc logo loop and restart. i still have access to hboot and fastboot. but when attempting to load into twrp, it shows the team win logo for half a second and then restarts the phone. then i installed cwm and it does boot into it but whatever option i pick, install zip, wipe data, ANYTHING, restarts the phone.
i have no idea what to do. i tried installing a rom using adb sideload but it stops at around 80%, ive tried installing different versions of twrp and cwm and same thing. i think it is bricked. im using the verizon htc one max. the only option i see left is the ruu toolkit but ive only been able to find the sprint version and then it says that bootloader needs to be locked and i have not idea how to do that from hboot, fastboot, or cwm
attempting to install superuser also fails
if there's anyone here that can help, please, any suggestions will be appreciated. thanks =:laugh:
Sounds like you're flashing the wrong TWRP.
Sent from my Galaxy Nexus using Tapatalk
suieitori said:
so attempting to install a new rom, i must have dont something wrong because now restarting the phone will leave me on the htc logo loop and restart. i still have access to hboot and fastboot. but when attempting to load into twrp, it shows the team win logo for half a second and then restarts the phone. then i installed cwm and it does boot into it but whatever option i pick, install zip, wipe data, ANYTHING, restarts the phone.
i have no idea what to do. i tried installing a rom using adb sideload but it stops at around 80%, ive tried installing different versions of twrp and cwm and same thing. i think it is bricked. im using the verizon htc one max. the only option i see left is the ruu toolkit but ive only been able to find the sprint version and then it says that bootloader needs to be locked and i have not idea how to do that from hboot, fastboot, or cwm
attempting to install superuser also fails
if there's anyone here that can help, please, any suggestions will be appreciated. thanks =:laugh:
Click to expand...
Click to collapse
May I suggest following these instructions?
http://forum.xda-developers.com/showpost.php?p=51753483&postcount=129
If you're able to complete those instructions outlined in that post, this should set you up with the latest HBOOT, Radio and TWRP (Recovery) for the Verizon HTC One.
Make sure you read the post fully before you start, especially this part:
fastboot flash zip firmware.zip (Be sure it finishes saying 'successful', not 'please flush again immediately'. If it says the flush again, rerun the command)
If you succeed in getting that done, see if TWRP still causes the phone to reboot and get back to us.
Randomly this morning, my phone rebooted to the bootloader and is rebooting every 10 seconds or so. I'm able to use the volume up button to cycle through the menu options, but the volume down and power buttons appear to do nothing on the bootloader screen. Also, holding the power button for an extended period (which would normally power cycle the device) does nothing. Any thoughts or ideas on this one? I'm stuck.
frpst9 said:
Randomly this morning, my phone rebooted to the bootloader and is rebooting every 10 seconds or so. I'm able to use the volume up button to cycle through the menu options, but the volume down and power buttons appear to do nothing on the bootloader screen. Also, holding the power button for an extended period (which would normally power cycle the device) does nothing. Any thoughts or ideas on this one? I'm stuck.
Click to expand...
Click to collapse
Are you rooted or is this stock?
Ƒłƴнαłƒ205 said:
Are you rooted or is this stock?
Click to expand...
Click to collapse
Rooted and unlocked- was running the newest Beanstalk build.
frpst9 said:
Rooted and unlocked- was running the newest Beanstalk build.
Click to expand...
Click to collapse
The newest so lollipop? I would recommend flashing more stable rom than lollipop at the moment or a lollipop rom that gets built regularly(no offense to beanstalk dev)... Flash to a stock rom and get stability and flash back to aosp.
Ƒłƴнαłƒ205 said:
The newest so lollipop? I would recommend flashing more stable rom than lollipop at the moment or a lollipop rom that gets built regularly(no offense to beanstalk dev)... Flash to a stock rom and get stability and flash back to aosp.
Click to expand...
Click to collapse
I hear you- problem is the bootloader doesn't stay active long enough for me to do anything, and the power button won't choose the item that is selected (i.e. enter recovery). I have about 10 seconds between reboots and no way to choose anything... kinda stuck. My next try will be to attempt to send a fastboot command in that 10 second window and see what happens...
frpst9 said:
I hear you- problem is the bootloader doesn't stay active long enough for me to do anything, and the power button won't choose the item that is selected (i.e. enter recovery). I have about 10 seconds between reboots and no way to choose anything... kinda stuck. My next try will be to attempt to send a fastboot command in that 10 second window and see what happens...
Click to expand...
Click to collapse
Sounds like you need to RUU if you can get something in fastboot going.
frpst9 said:
I hear you- problem is the bootloader doesn't stay active long enough for me to do anything, and the power button won't choose the item that is selected (i.e. enter recovery). I have about 10 seconds between reboots and no way to choose anything... kinda stuck. My next try will be to attempt to send a fastboot command in that 10 second window and see what happens...
Click to expand...
Click to collapse
Power button is bad or your emmc is toast.