Related
I've seen this blog.
http://blog.clove.co.uk/2011/04/12/samsung-galaxy-s-ii-umts-frequencies/
However, with our experience in the industry we have seen that almost every device launched in recent years within Europe has been ‘optimised’, with the American 850/1900 range locked down, leaving only 900/2100 for the rest of the world. As we are based in the UK it is for this reason we have taken the tentative step of advertising only these frequencies.
Click to expand...
Click to collapse
yeah, UK clove store said EU galaxy S2 doesn't support US 850/1900
network. (They said that may be US 850/1900 UMTS frequencies are locked.)
But, I find google news.
http://www.mydaily-gadget.com/news/5718-att-getting-samsung-galaxy-s2-gt-i9100-fcc-says-i-do
Speaking about release dates we do not have a specific one for the GT-i9100 in the USA but we can confirm the FFC has authorized the use of this particular smart phone on the 850MHz and 1900MHz GSM frequencies which means the first carrier to offer the Samsung Galaxy S II might be AT&T. These two frequencies account for the AT&T 3G network but they also match some Canada operator’s frequencies so there is a big chance the Galaxy S II will land there too in the near future.
Click to expand...
Click to collapse
Follow this news, EU galaxy S2 using US GSM 850/1900 networks.
Who is say that TRUE?
i'm very confused.
Quad band GSM 850/900/1800/1900
Source: http://www.samsung.com/global/microsite/galaxys2/html/specification.html
It should work.
apwhitelaw said:
Quad band GSM 850/900/1800/1900
Source: http://www.samsung.com/global/microsite/galaxys2/html/specification.html
It should work.
Click to expand...
Click to collapse
So, only using ATT GSM network?
ATT UMTS network can't use?
Pulverizer said:
I've seen this blog.
http://blog.clove.co.uk/2011/04/12/samsung-galaxy-s-ii-umts-frequencies/
yeah, UK clove store said EU galaxy S2 doesn't support US 850/1900
network. (They said that may be US 850/1900 UMTS frequencies are locked.)
But, I find google news.
http://www.mydaily-gadget.com/news/5718-att-getting-samsung-galaxy-s2-gt-i9100-fcc-says-i-do
Follow this news, EU galaxy S2 using US GSM 850/1900 networks.
Who is say that TRUE?
i'm very confused.
Click to expand...
Click to collapse
That first link (that I provided earlier tonight I think) - read it to the end please, Clove has all the info on that page, just finish reading it. sorry for the tone , but I think you did not pay enough attention - there are comments to that blog post that say clove confirmed with the manufacturer and local distributor that all 4 bands are present.
I'm confused here
I have SGSII ordered from Clove. I plan to use it with ATT sim card. Have I made a mistake? Will I be able to use it? Do I need to cancel?
I hope it works well with AT&T since I intend to get this phone.
My current (imported) GT-i9000 did not properly support AT&T and has very poor call quality and call drop issues.
Sent from my Xoom using XDA Premium App
Although Clove originally said they doubted it would support 850/1900 3G+, they did later confirm their stock would be quad-band 3G. So no need to worry about support for NAM 3G.
Once someone get's the GS2 in USA on ATT, can you confirm that it indeed works on Edge AND 3G?
kurtkbee said:
I hope it works well with AT&T since I intend to get this phone.
My current (imported) GT-i9000 did not properly support AT&T and has very poor call quality and call drop issues.
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
That's because the i9000 is only tri-band UMTS and only supports AT&T's 1900 frequency. When it gets to an area where the 1900 H/3G signal is weak, it can't switch over to the 850 UMTS simply because its hardware doesn't support it. So, then the phone call drops. You'll notice if you switch the i9000 to 2G/Edge, you'll never get a dropped call... because it's quad band GSM.
Also, ever notice you never get dropped calls when stationary and on H/3G? That's because with a solid 1900 UMTS signal, the i9000 will never search for the unsupported 850 band.
(And yes, I have confirmed all of this as I also own an i9000.)
i9100 supports quad-band UMTS with 850/1900 H/3G, so you will not have the frequent dropped calls anymore.
Here are the frequencies for AT&T: http://en.wikipedia.org/wiki/AT&T_Mobility#Radio_Frequency_Summary
Frequencies used on the AT&T Network
850 MHz GSM/GPRS/EDGE 2G
1900 MHz GSM/GPRS/EDGE 2G
850 MHz UMTS/HSPA 3G
1900 MHz UMTS/HSPA 3G
700 MHz LTE 4G
So, the i9100 International will do almost all. Except LTE.
pepemosca said:
Here are the frequencies for AT&T: http://en.wikipedia.org/wiki/AT&T_Mobility#Radio_Frequency_Summary
Frequencies used on the AT&T Network
850 MHz GSM/GPRS/EDGE 2G
1900 MHz GSM/GPRS/EDGE 2G
850 MHz UMTS/HSPA 3G
1900 MHz UMTS/HSPA 3G
700 MHz LTE 4G
So, the i9100 International will do almost all. Except LTE.
Click to expand...
Click to collapse
Thanks for your information.
Ok guys I have an atrix 4g running on t-mobile. My question is why cant I get 4g/3g on this phone ? T-mobile runs on the 2100 band and the phone does support that band so why no 4g or 3g? common sense would tell me that if t-mo runs 4g on 2100 and the phone is capable of running on 2100 that it would work. have searched for a total of about 4 hours or so over the past couple days and cant find a straight answer only thing i can find is that att doesnt run on 2100 band yet the phone does. thanks in advance to anybody that can answer and taking the time to read.
are you getting H+ or H? (This is "3.5g") The Atrix 4g is not a true 4g phone.
Because the 2100 spectrum that you're using the phone on now is part of the quad-band gsm which is edge/2g. The difference lies in the bands used for 3g/4g, in which case AT&T only uses 850/1900 and tmobile only uses 1700/2100.
There is also a bunch of things that include HSPA, AWS, WCDMA, and so on and so on but I don't know enough about that to comment.
EDIT: Also, the only phones I know that can be used on both AT&T and Tmobile 3g/4g are "penta-band" phones like some European Nokia phones and the unlocked Galaxy Nexus that needs to be imported as well.
shattar01 said:
Ok guys I have an atrix 4g running on t-mobile. My question is why cant I get 4g/3g on this phone ? T-mobile runs on the 2100 band and the phone does support that band so why no 4g or 3g? common sense would tell me that if t-mo runs 4g on 2100 and the phone is capable of running on 2100 that it would work. have searched for a total of about 4 hours or so over the past couple days and cant find a straight answer only thing i can find is that att doesnt run on 2100 band yet the phone does. thanks in advance to anybody that can answer and taking the time to read.
Click to expand...
Click to collapse
Wcdma=utms=3g
Yes, WCDMA and AWS(1700), as far as I know, are both from UMTS and the differences in regards to 3G between AT&T and Tmobile lie in the spectrum use (850&1900 vs 1700&2100). And both AT&T and Tmobile use HSPA(+) based off their respected UMTS frequencies.
I just don't understand the "leap" in GSM technology that breaks the quad-band compatibility, that's all.
matthew5025 said:
Wcdma=utms=3g
Click to expand...
Click to collapse
Also I've read 850 is att's main spectrum for large areas and 900 for T-Mobile. All higher spectrums are for smaller, rural areas.
If your looking for 3g maybe find a town or, buy a dual band amplifier? That's IF they have 2100 MHz band working where you are located.
Lower bands ie 850/900 are the download streams. 1700/1900/2100 are upload streams. If I'm not mistaken
Also a T-Mobile vibrant supports att, it also has our main band, 850mhz. Again which is the main large areas, like T-Mobile 900mhz. 1700-2100mhz for att/T-Mobile range is only as good as the towns that still has that band currently operating for hspa/3g data. I've seen alot of T-Mobile phones that have 850/1900/2100, and work on att. If they were 1600/1900/2100 did not for me.
You need that lower frequencies to ensure it to work. Then....
Also for regional based frequencies...
http://en.m.wikipedia.org/wiki/Universal_Mobile_Telecommunications_System
That link will let you know what that all really means.
I think you are mixing up gsm and umts.
GSM = 2G/Edge
UMTS (HSPA, HSPA+, HSDPA/HSUPA, WCDMA, AWS) = 3G
Have a look here. You will see they label "3G" as "UMTS" which is HSPA/WCDMA. A little more down you can see they label their data as "HSDPA", which is download, and "HSUPA" which is upload. Further delineating the speeds they label either one as UMTS for down and Edge as up, which to me tells me they use gsm for the upload and only use UMTS for download. Either way, there is not a T-mobile phone available that can be unlocked and used on AT&T's 3G, just 2G and vice versa. As I have previously mentioned, you will need a penta-band phone for that.
Ciloteille said:
Also I've read 850 is att's main spectrum for large areas and 900 for T-Mobile. All higher spectrums are for smaller, rural areas.
If your looking for 3g maybe find a town or, buy a dual band amplifier? That's IF they have 2100 MHz band working where you are located.
Lower bands ie 850/900 are the download streams. 1700/1900/2100 are upload streams. If I'm not mistaken
Also a T-Mobile vibrant supports att, it also has our main band, 850mhz. Again which is the main large areas, like T-Mobile 900mhz. 1700-2100mhz for att/T-Mobile range is only as good as the towns that still has that band currently operating for hspa/3g data. I've seen alot of T-Mobile phones that have 850/1900/2100, and work on att. If they were 1600/1900/2100 did not for me.
You need that lower frequencies to ensure it to work. Then....
Also for regional based frequencies...
http://en.m.wikipedia.org/wiki/Universal_Mobile_Telecommunications_System
That link will let you know what that all really means.
Click to expand...
Click to collapse
And don't get me wrong, I'm not trying to give anyone a hard time but it's misinformation to tell anyone that a T-mobile phone can work on AT&T 3G.
And I'll say it again, I'm not an expert so if anyone can better explain then I'm all ears (eyes).
live4nyy said:
I think you are mixing up gsm and umts.
GSM = 2G/Edge
UMTS (HSPA, HSPA+, HSDPA/HSUPA, WCDMA, AWS) = 3G
Have a look here. You will see they label "3G" as "UMTS" which is HSPA/WCDMA. A little more down you can see they label their data as "HSDPA", which is download, and "HSUPA" which is upload. Further delineating the speeds they label either one as UMTS for down and Edge as up, which to me tells me they use gsm for the upload and only use UMTS for download. Either way, there is not a T-mobile phone available that can be unlocked and used on AT&T's 3G, just 2G and vice versa. As I have previously mentioned, you will need a penta-band phone for that.
And don't get me wrong, I'm not trying to give anyone a hard time but it's misinformation to tell anyone that a T-mobile phone can work on AT&T 3G.
And I'll say it again, I'm not an expert so if anyone can better explain then I'm all ears (eyes).
Click to expand...
Click to collapse
I am just merely stating that I have a motorola defy on ATT, and it worked great for a long time with great speeds before I got a motorola atrix and infuse.
Im not saying that every tmobile phone will have working talk/text, or data for that matter. I have just posted an idea, or atleast what to look for when you are cruising for phones not labeled for your carrier.
I was getting my motorola defy with the att "grand fathered internet" for 10 dollars a month and it was about 160-420KB/s down, and 80-190KB/s up. but some phones are capable of this, others arent. I have a general idea, and have played with several different carrier cellphones and used them with att and att's 3g data.
Rogers HTC Dream (x2 of them)
Telus Milestone
Tmobile Defy
Rogers Atrix
ATT Atrix (x2 of them)
ATT Infuse
Rogers and Telus actually use the same 3G bands as AT&T so as long as those are unlocked they will work. And I'm not saying an unlocked T-mobile can't work on AT&T, because they can (they both use quad-band gsm) but you can not use an unlocked T-mobile phone an AT&T 3G. That's all I'm saying.
Now, they did make an European version of the Defy that uses the 850 3G band but not the T-mobile "branded" one.
I'm going to stick to my guns on this one because I don't want to give anyone the wrong idea about interchanging AT&T and T-mobile phones and expecting 3G service. I'm fairly certain about this and unless someone can prove otherwise that's how I will think.
Ciloteille said:
I am just merely stating that I have a motorola defy on ATT, and it worked great for a long time with great speeds before I got a motorola atrix and infuse.
Im not saying that every tmobile phone will have working talk/text, or data for that matter. I have just posted an idea, or atleast what to look for when you are cruising for phones not labeled for your carrier.
I was getting my motorola defy with the att "grand fathered internet" for 10 dollars a month and it was about 160-420KB/s down, and 80-190KB/s up. but some phones are capable of this, others arent. I have a general idea, and have played with several different carrier cellphones and used them with att and att's 3g data.
Rogers HTC Dream (x2 of them)
Telus Milestone
Tmobile Defy
Rogers Atrix
ATT Atrix (x2 of them)
ATT Infuse
Click to expand...
Click to collapse
---------- Post added at 08:47 AM ---------- Previous post was at 08:36 AM ----------
Upon further research, I have found this article, where under certain circumstances, you can use an unlocked AT&T iPhone with T-mobile 3G:
http://www.gsmarena.com/tmobile_usa_running_1900mhz_3g_in_some_areas_iphones_invited-news-3537.php
Now, this shows that an AT&T phone can maybe use T-mobile 3G but not the other way around. Again, I'm always up for learning something new but I need references/proof.
Well I do get att 3g on the defy and vibrant. I am currently getting about 300ish KB/s on them and 600+KB/s on my attic, I'm just going with the facts. Those facts are that certain T-Mobile phones will work with Att, provided they have 850mhz band. That allows you in most towns (near me) to get 3g
False.
300KB/s is Edge speed, which is only 2G.
http://en.wikipedia.org/wiki/2G
http://www.phonescoop.com/glossary/term.php?gid=107
That's why you get faster speeds on the Atrix because it actually uses 3G.
Again, both AT&T and T-mobile use quad-band GSM. Which is why you can unlock a T-mobile phone and use it on AT&T, and vice versa, but it is only 2G/Edge and NOT 3G.
http://www.phonescoop.com/glossary/term.php?gid=139
http://www.phonescoop.com/glossary/term.php?gid=3
Furthermore, here are the wiki pages for AT&T and T-mobile which both inlcude frequency charts outlining the technology (2G or 3G) each one uses:
http://en.wikipedia.org/wiki/AT&T_Wireless
http://en.wikipedia.org/wiki/T-Mobile_USA
Here are the charts:
AT&T:
Frequency Protocol Class
Frequencies used on the AT&T Network
850 MHz GSM/GPRS/EDGE 2G
1900 MHz GSM/GPRS/EDGE 2G
850 MHz UMTS/HSPA 3G
1900 MHz UMTS/HSPA 3G
700 MHz LTE 4G
T-mobile:
Frequency Band Protocol
850 MHz GSM/GPRS/EDGE 2G
1900 MHz GSM/GPRS/EDGE 2G
1700 MHz UMTS (W-CDMA)/HSPA/HSPA+ 4G (formerly 3G[34])
1900 MHz UMTS (W-CDMA)/HSPA/HSPA+ 4G
I check for facts and references, I'm only saying what I find in research.
Again, when unlocked, a T-mobile phone can use AT&T 2G/Edge, not 3G
Ciloteille said:
Well I do get att 3g on the defy and vibrant. I am currently getting about 300ish KB/s on them and 600+KB/s on my attic, I'm just going with the facts. Those facts are that certain T-Mobile phones will work with Att, provided they have 850mhz band. That allows you in most towns (near me) to get 3g
Click to expand...
Click to collapse
I know it's been posted a few times before regarding whether or not the international version of the Galaxy S III will be compatible on Canadian Carriers (In my case, TELUS) but I am just wondering if it can in fact work. Here's why I ask:
I live in Kelowna, British Columbia, and my current phone is a Galaxy S II from Bell Mobility. I unlocked it back in August of last year to use it on the TELUS network. It ran on the 850/900/1900/2100 MHz bands and I had no issue with using it on TELUS at HSPA+ speeds. With the Galaxy S III it runs on the same bands, so shouldn't it work? Now I've seen people saying that it still requires the 1700 MHz frequency (same idea with T-Mobile), however in my location there is no cellular tower that supports the 1700 MHz frequency (according to Canadian Cellular Towers Map). The only frequencies in Kelowna are 850 and 1900 actually.
This being said, shouldn't the Galaxy S III work in my area if I were to continue with my pre-order for the International variant?
[EDIT]
Also, just to point out, the HTC One S, which is also just released on TELUS, also opperates on the same frequencies as the Galaxy S III International.
I think you'll be fine.
And if the international version doesn't work from wherever you buy it from, I'm sure you can return it.
That's the premise I'm going on with SaskTel.
@MaesterB: Yeah I think so too. I spoke with a TELUS rep now and he claims that the 850/1900 MHz frequencies are enough to handle up to 42Mbps download speeds, and the 1700 MHz is primarily for the LTE coverage areas (Vancouver, Toronto, etc). Of course, in my area my Galaxy S II can only hit up to 6-8 Mbps anyways so I'm not overly concerned.
Exactly.
In Regina, we have "4G" but the fastest I can get is like up to 5MB anywhere in the city.
So, the International SGS3, running on 3g/4g...should be just fine.
So since AT&T uses bands 4 & 17 for LTE (700/1700/2100MHz) and according to the Developers edition has 700/850/1900MHz then to me that looks like the Developers edition can only access AT&Ts 700 LTE bands.
Is this correct?
Seems to be correct.. but im not a expert when it comes to network bands
Red5 said:
So since AT&T uses bands 4 & 17 for LTE (700/1700/2100MHz) and according to the Developers edition has 700/850/1900MHz then to me that looks like the Developers edition can only access AT&Ts 700 LTE bands.
Is this correct?
Click to expand...
Click to collapse
The Developers Edition page shows the following: LTE: 700/850/AWS/1900 MHz (US)
This would mean it supports 700, 850, 1700, 1900 and 2100. AWS refers to Band 4, which is 1700 for uplink and 2100 for downlink. Unless something in AT&T's white sheet is missing, the Developer's edition supports two extra bands that are used in some European and Asian countries.
TRF-Inferno said:
The Developers Edition page shows the following: LTE: 700/850/AWS/1900 MHz (US)
This would mean it supports 700, 850, 1700, 1900 and 2100. AWS refers to Band 4, which is 1700 for uplink and 2100 for downlink. Unless something in AT&T's white sheet is missing, the Developer's edition supports two extra bands that are used in some European and Asian countries.
Click to expand...
Click to collapse
Ah, that clears it up for me. Thanks.
TRF-Inferno said:
The Developers Edition page shows the following: LTE: 700/850/AWS/1900 MHz (US)
This would mean it supports 700, 850, 1700, 1900 and 2100. AWS refers to Band 4, which is 1700 for uplink and 2100 for downlink. Unless something in AT&T's white sheet is missing, the Developer's edition supports two extra bands that are used in some European and Asian countries.
Click to expand...
Click to collapse
Finally someone can give me a sensible answer! :thumbup:I read from another thread that T-mobile LTE works on AWS 1700/2100 but the unlocked new one does not have the two frequencies in LTE. Apparently, that was a wrong info. I am going to move to DC and hopefully my dev. new one will work on T-mobile LTE in DC.
Be Vegan, Make Peace ＼(^o^)／
Because it's radio supports these extra bands, will there be any software incompatibility between the Dev edition and the AT&T one? I'm trying to find the proper forum for Dev edition development!
Is the Developer edition basically an AT&T One with extra bands enabled? Are the AT&T and Dev editions different model numbers? I have so many questions, but so much excitement...
peachlai said:
Finally someone can give me a sensible answer! :thumbup:I read from another thread that T-mobile LTE works on AWS 1700/2100 but the unlocked new one does not have the two frequencies in LTE. Apparently, that was a wrong info. I am going to move to DC and hopefully my dev. new one will work on T-mobile LTE in DC.
Click to expand...
Click to collapse
T-Mobile's LTE frequency is on Band 4, so as far as using the Developers Edition on T-Mobile USA, you will certainly get LTE as long as T-Mobile has it running in the area, and default to 3G/HSPA+ since it does support PCS band (1900 MHz), albeit this coverage may suffer as the phone is missing the AWS band for UMTS.
gridlock489 said:
Because it's radio supports these extra bands, will there be any software incompatibility between the Dev edition and the AT&T one? I'm trying to find the proper forum for Dev edition development!
Is the Developer edition basically an AT&T One with extra bands enabled? Are the AT&T and Dev editions different model numbers? I have so many questions, but so much excitement...
Click to expand...
Click to collapse
Their device identifier code will certainly be different, so HTC will make sure you can't run the Developer Edition's RUU for the AT&T phone. As far as custom ROM is concerned, I don't see why you can't use the same ROM as long as it's not touching any other partition other than the /system.
TRF-Inferno said:
T-Mobile's LTE frequency is on Band 4, so as far as using the Developers Edition on T-Mobile USA, you will certainly get LTE as long as T-Mobile has it running in the area, and default to 3G/HSPA+ since it does support PCS band (1900 MHz), albeit this coverage may suffer as the phone is missing the AWS band for UMTS.
Click to expand...
Click to collapse
Yes... I hope I won't travel around next year and will stay in DC most of the time. I am currently using Straight Talk with my Droid DNA, and it has good coverage, hspa+ most of the time. But Straight Talk does not have LTE. I am so ready to feel the speed of LTE! But it seems like if I would be outside of DC, my LTE experience will drop to 2G.... Anyway, at least I have the freedom to change back to Straight Talk if I have to.
Be Vegan, Make Peace ＼(^o^)／
peachlai said:
Yes... I hope I won't travel around next year and will stay in DC most of the time. I am currently using Straight Talk with my Droid DNA, and it has good coverage, hspa+ most of the time. But Straight Talk does not have LTE. I am so ready to feel the speed of LTE! But it seems like if I would be outside of DC, my LTE experience will drop to 2G.... Anyway, at least I have the freedom to change back to Straight Talk if I have to.
Be Vegan, Make Peace ＼(^o^)／
Click to expand...
Click to collapse
I had straight talk before I went to att. The difference is mind blowing. Even on just h+ it blows straight talk out of the water 3 fold. I don't regret leaving straight talk one bit
Sent from my HTC One VX using xda premium
I live in the California AT&T service area. I have been trying to find out the 4G and LTE bands on the intl and ATT Versions. If I buy the intl version will it be compatible with AT&T LTE bands? Ideally I would like to buy the intl version so that I can get the OS updates when Samsung releases them without waiting the extra time for AT&T to release the upgrade. I also dont want the AT&T bloatware.
gravyplaya said:
I live in the California AT&T service area. I have been trying to find out the 4G and LTE bands on the intl and ATT Versions. If I buy the intl version will it be compatible with AT&T LTE bands? Ideally I would like to buy the intl version so that I can get the OS updates when Samsung releases them without waiting the extra time for AT&T to release the upgrade. I also dont want the AT&T bloatware.
Click to expand...
Click to collapse
International variant, as long as it supports the LTE bands. I even converted my M8 into Developer Edition because I disliked the bloatware from AT&T and because OTAS take soooo long to appear with AT&T branded devices.
Does anyone know if the intl version supports att lte?
Sent from my Nexus 6 using Tapatalk
I'm thinking about doing the same thing and buying the international variant. I have a Moto X Pure Edition, and I love not having carrier bloatware.
Sent from my ATRIX HD using XDA Free mobile app
Does anyone know whether the radios for AT&T, T-Mobile, Verizon and international version are different, such as with the LG G3? Normally gsmarena has info on the frequencies, but nothing is on there yet. Thanks
The unlocked international version supports the following AT&T LTE frequency/bands:
850/5
1900/2
The following are all of AT&T frequency/bands:
700/12,17
850/5
1700,2100/4
1900/2
I do not know if the model specific and locked to ATT supports all of their bands or remains identical to the international unlocked version. I do know different bands can be activated via firm ware update, like Moto did with the 2nd gen Moto X. The pure edition got updated to support all of ATT bands instead of just a couple.
From the T-mobile website for the Galaxy S6 Edge:
Quad Band GSM;
LTE: 1, 2, 3, 4, 5, 7, 8, 17;
UMTS: Band I (2100), Band II (1900), Band IV (1700/2100), Band V (850), Band VIII (900)
From the AT&T site for the Galaxy S6 Edge:
4G-LTE Bands 1, 2, 3, 4, 5, 7, 8, 12, 17, 20, 29 and 30
3G - UMTS 850/1900/2100MHz
GSM/GPRS/EDGE 850/900/1800/1900MHz
So the AT&T version seems to cover more bases in terms of LTE coverage e.g. for those wanting LTE coverage in the UK too, the T-mobile version will work on 3 (3) and EE (3 and 7), whereas the AT&T version will work on 3 (3), EE (3 and 7), O2 (20) and Vodafone (20) [LTE bands shown in brackets]
holtenc said:
The unlocked international version supports the following AT&T LTE frequency/bands:
850/5
1900/2
Click to expand...
Click to collapse
Hey, do you have any link to the specs for the Unlocked International model? Cant find one myself!
Thanks
Pito
Where does one even order an international variant? I cannot find one anywhere?
Pure+ said:
Where does one even order an international variant? I cannot find one anywhere?
Click to expand...
Click to collapse
http://www.clove.co.uk/
http://www.expansys.com/
Typically from UK but there are from other places too.
Pito
thanks, but i need to buy in US
Pure+ said:
thanks, but i need to buy in US
Click to expand...
Click to collapse
You can buy from
http://www.expansys-usa.com/
The International Unlocked version is a UK version that is Sim Unlocked and not attached to any carrier (no bloat and no carrier branding). You can't buy a US version unlocked anywhere in the US. Even the stores in the US that sell unlocked International versions are selling the UK one.
Pito
mp2ning said:
Hey, do you have any link to the specs for the Unlocked International model? Cant find one myself!
Thanks
Pito
Click to expand...
Click to collapse
http://www.mobicity.com/samsung-galaxy-s6-edge-32gb-4g-lte.html#.VRm74_nF-LE
click the specs tab
Final official answer
I just called an ATT tech and he told me that while I could get the UK/intl version IT WILL BE COMPATIBLE WITH ATT LTE. BUT since not all the bands are supported the intl version will have limited LTE coverage in the US.
For example the intl version only supports 2 of the 4 bands in the US. (Bands 2 and 5, when bands 2, 4, 5, 17 are available). So if the towers near your house are only using bands 2 and 4 you'll get less coverage/signal as if the towers near your house supported more bands.
What? T-Mobile version doesn't support band 12 LTE?
gravyplaya said:
I just called an ATT tech and he told me that while I could get the UK/intl version IT WILL BE COMPATIBLE WITH ATT LTE. BUT since not all the bands are supported the intl version will have limited LTE coverage in the US.
For example the intl version only supports 2 of the 4 bands in the US. (Bands 2 and 5, when bands 2, 4, 5, 17 are available). So if the towers near your house are only using bands 2 and 4 you'll get less coverage/signal as if the towers near your house supported more bands.
Click to expand...
Click to collapse
Hmmm... That's interesting because looking at the "Tech Specs" section for the Galaxy S6, as listed for ordering directly from Samsung in the UK, the Galaxy S6 appears to have support for all of the LTE and UMTS bands that are used by AT&T, here in the States:
http://www.samsung.com/uk/consumer/mobile-devices/smartphones/android/SM-G920FZKABTU
This info is listed on the above link for the Galaxy S6 (model SM-G920F), but (oddly) not for the Edge (SM-G925F) model. It shows the following bands as being supported:
2G GSM
GSM850, GSM900, DCS1800, PCS1900
3G UMTS
B1(2100), B2(1900), B5(850), B8(900)
4G FDD LTE
B1(2100), B2(1900), B3(1800), B4(AWS), B5(850), B7(2600), B8(900), B12(700), B17(700), B18(800), B19(800), B20(800), B26(800)
Unless there's something different about these bands due to the preceding "B" designation before the band number, it looks like the UK version should support LTE bands 2, 4, 5, 17, which is what AT&T are supposed to be using here in the States...
Not sure why Samsung doesn't list the "Tech Specs" on this site for the Edge model, but I would presume and hope they are identical to the Galaxy S6 SM-G920F model they list on their UK site.
Anyone have further details or insight into this? Hopefully I'm not misreading something and spreading erroneous info here!
mp2ning said:
Hey, do you have any link to the specs for the Unlocked International model? Cant find one myself!
Thanks
Pito
Click to expand...
Click to collapse
Here is a link to Samsung UK and the specs for the international S6 version SM-G920F.
gravyplaya said:
I just called an ATT tech and he told me that while I could get the UK/intl version IT WILL BE COMPATIBLE WITH ATT LTE. BUT since not all the bands are supported the intl version will have limited LTE coverage in the US.
For example the intl version only supports 2 of the 4 bands in the US. (Bands 2 and 5, when bands 2, 4, 5, 17 are available). So if the towers near your house are only using bands 2 and 4 you'll get less coverage/signal as if the towers near your house supported more bands.
Click to expand...
Click to collapse
That doesn't sound right based on what I've read. This page says what AT&T uses:
"AT&T 4G HSPA and HSPA+ use 850Mhz(Band 5) and 1900Mhz(Band 2) bands but it all depends on area if they own a license. LTE uses Band 17(700Mhz), Band 5(850Mhz), Band 2(1900Mhz), Band 4(1700/2100Mhz) currently"
Then according to this page the SM-G920F version in the UK does support LTE bands 2, 4, 5, 17. This page (pdadb.net) here seems to show that the SM-G920I also supports those LTE bands. Then in comments on Android Central this page gravage says he owns a G920I and it works without a hitch.
Thoughts? I'm looking into getting the international version as well so I can avoid AT&T's crap.
sbrown23 said:
That doesn't sound right based on what I've read. This page says what AT&T uses:
"AT&T 4G HSPA and HSPA+ use 850Mhz(Band 5) and 1900Mhz(Band 2) bands but it all depends on area if they own a license. LTE uses Band 17(700Mhz), Band 5(850Mhz), Band 2(1900Mhz), Band 4(1700/2100Mhz) currently"
Then according to this page the SM-G920F version in the UK does support LTE bands 2, 4, 5, 17. This page (pdadb.net) here seems to show that the SM-G920I also supports those LTE bands. Then in comments on Android Central this page gravage says he owns a G920I and it works without a hitch.
Thoughts? I'm looking into getting the international version as well so I can avoid AT&T's crap.
Click to expand...
Click to collapse
I live in Mexico but AT&T's variant is the American version with most compatibility in both Mexico & US so I decided to buy that one and just converted it to Developer Edition. So now I have full connectivity without AT&T bloatware and quick OTAs. Hope it helps.