I9100 recovery problem - Galaxy S II Q&A, Help & Troubleshooting

Hello guys!
My problem is that I wanted to root my freind's I9100, but something went totally wrong...
Now my problem is that the bootloader doesn't seem to work... I hold the power button, the screen lights up, nothing happens for 1-2 minutes, it crashes and it all begins again.
The only thing that is working (I think) is the Download mode...
I tried to flash VillainROM v1.1 (I read that it would solve the problem somewhere), but it didn't work...
Also with that ROM I can get to the recovery, but unfortunately it can't find the storage (Of course I have a backup on there...)
I'm really worried right now, because it's not mine...
Please help me! :crying:

If you can get into Download mode, then flash a stock rom and see if that fixes your problem.
Stock rom 4.0.3 or 4.0.4 without the emmc brick bug
Sent from my tomato using xda premium

krayndr said:
If you can get into Download mode, then flash a stock rom and see if that fixes your problem.
Stock rom 4.0.3 or 4.0.4 without the emmc brick bug
Sent from my tomato using xda premium
Click to expand...
Click to collapse
Didn't work for me... Any other ideas?
EDIT: I waited some minutes and now it says "KERNEL PANIC UPLOAD MODE" any ideas?
EDIT2: I've done a lot of research now and it seems like I have an emmc-brick which can only be fixed by re-partitioning... does anyone know where I can get the PIT file and if that would fix it? THANKS

what method did u use to root??

I didn't root it, i installed CWM recovery, wiped system, and then when i tried to wipe data it crashed...
Sent from my GT-I9300 using xda app-developers app

Did you? Before install de cmw you should make the root! Super brick!
Sent from my GT-I9100 using xda premium

marf28101995 said:
Did you? Before install de cmw you should make the root! Super brick!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I don't think that this makes a difference, root basically is just some modified system files, isn't it?
and with a new rom the old system partition gets wiped completely

I dont think its super bricked if u can power on the device. try to get into download mode and flash a stock rom. If you have warranty you better take your phone to samsung repair centre

pasanjay said:
I dont think its super bricked if u can power on the device. try to get into download mode and flash a stock rom
Click to expand...
Click to collapse
That's what I tried about 15 times...
Only the rom, with bootloader, with all 4 parts, with pit, only pit, only kernel, pit & all 4 parts, nothing seems to work...
when I try all 4 parts it's stuck at DATAFS (or something like that)
& when I flashed VillianROM v1.1 it gets me into recovery, but it always says that it can't find E:\*
Please help me & thanks for you who tries / tried to help me...

karriere said:
That's what I tried about 15 times...
Only the rom, with bootloader, with all 4 parts, with pit, only pit, only kernel, pit & all 4 parts, nothing seems to work...
when I try all 4 parts it's stuck at DATAFS (or something like that)
& when I flashed VillianROM v1.1 it gets me into recovery, but it always says that it can't find E:\*
Please help me & thanks for you who tries / tried to help me...
Click to expand...
Click to collapse
Give the phone to a repair centre if you dont know what you are doing

you didnt partition the phone via odin did you, i remember i bricked it at datafs, my antivirus and kies was scanning its process so i reflashed.
http://forum.xda-developers.com/showthread.php?t=1457458

pasanjay said:
Give the phone to a repair centre if you dont know what you are doing
Click to expand...
Click to collapse
Actually i know what I'm doing...
It looks like it's hardbricked because of a so called "brick bug" on the newest android version for the S2/Note
Sent from my GT-I9300 using xda app-developers app

karriere said:
Actually i know what I'm doing...
It looks like it's hardbricked because of a so called "brick bug" on the newest android version for the S2/Note
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
No it cant be. If you can power on your device its not super bricked..If it was super bricked your phone would be just a piece of plastic that gets heat up near the camera area. you should have just flashed a safe kernel like siyah using odin. Its perfectly safe. you must have ticked the repartition on Odin

Your data partition is corrupted. And only flashing a .pit file would save your phone. If it doesnt, i think samsung is the only way...
Sent from my potato running potatomod.

Sent from my I9100 using xda app-developers app

Related

[Q] Help to unbrick softbrick.

I wanted to revert to Sammy rom from cm9 beta. So I ran Odin and placed all the necessary files. Went into download mode, attached USB, and started. It got stuck at the mibib part after 'big partition size!!' I did have admin rights, redownloaded the same rom from samfirmware and reflashed many times with no luck.
Can someone please help?? Its my brother's phone btw.
First flash a stock rom based rom
Like
herpderp ©copy+paste
Go into recovery and format all partitions then use Odin again
Sent from my GT-S5830
and shutdown kies before flashing! this may prevent some errors!
______________|--|________________
ACE running STOCKLITE v5 from TJ_Droid
With
Beats Audio & Lagfreev3 from SLAID
Governed by SmartAss v2
If i helped hit"THANKS",it´s free :b
bathcrow said:
Go into recovery and format all partitions then use Odin again
Sent from my GT-S5830
Click to expand...
Click to collapse
I am unable to enter recovery now. Is there any Odin flashable recovery?
Sent from my GT-i9000 running ICS using XDA App
sefira said:
I am unable to enter recovery now. Is there any Odin flashable recovery?
Sent from my GT-i9000 running ICS using XDA App
Click to expand...
Click to collapse
Nope
Try adb reboot recovery
herpderp ©copy+paste
With the big partition thing try right click odin and run as admin incase. Make sure you have all neccesary files in the right place. (e.g. Default program (made that up) cant be in boot) make sure odin is on first. Then go into download mode. Press up. Then press start on odin. Or you can do a hard reset via abd (restore all files and things) i dont know the cmds off by heart so google the hard reset thing.
Sent From The Phone Of Gamers
One question...is ur phone rooted
Sent From The Phone Of Gamers
gmaster1 said:
One question...is ur phone rooted
Sent From The Phone Of Gamers
Click to expand...
Click to collapse
I was.
Sent from my GT-i9000 running ICS using XDA App
spacecaker said:
Nope
Try adb reboot recovery
herpderp ©copy+paste
Click to expand...
Click to collapse
The problem is that the recovery is screwed cause the phone only shows phone-!-computer sign.
Sent from my GT-i9000 running ICS using XDA App
well,there are always samsung centres out there if you fail to fix it...
hopefully you can avoid that
Well ur phone is dead if you see a !. Not even samsung can fix it i dont think...sry
Sent From The Phone Of Gamers
I think just doing a hrd reset will revert it to normal stock
Sent From The Phone Of Gamers
gmaster1 said:
I think just doing a hrd reset will revert it to normal stock
Sent From The Phone Of Gamers
Click to expand...
Click to collapse
How can I hard reset if I can't access recovery? All I can think of now is to keep flashing with Odin and hope it gets past mibib
Sent from my GT-i9000 running ICS using XDA App
http://forum.xda-developers.com/archive/index.php/t-1342569.html
might help u out
ohh... i faced the same problem. its because u didnt flash it completely through odin. did u extracted the zip file(downloaded) if its one package extract the file and put *.md5/tar in one package column. here for review
http://www.youtube.com/watch?v=3x5EJKY64Vg
for one package:
http://www.youtube.com/watch?v=xae93GfDCjw
Try to change usb ports.....donot use the front ones
Sent from my GT-S5830 using XDA
get it to service center and troll the employees XD <----LAst resort
anyway did you use 4.38? (or somethin like that. sorry didnt use it since I used custom roms) As I see in your sig, u use SGS.. can someone please confirm that odin used in SGS supports SGA?
Doo:DAce said:
get it to service center and troll the employees XD <----LAst resort
anyway did you use 4.38? (or somethin like that. sorry didnt use it since I used custom roms) As I see in your sig, u use SGS.. can someone please confirm that odin used in SGS supports SGA?
Click to expand...
Click to collapse
i dont think so....
Actually I have no problems with entering download mode and running the correct Odin. I just want to know why it gets stuck halfway even when I tried many times and redownloaded many times too
Sent from my GT-i9000 running ICS using XDA App

Desperately need help.

This is slightly off topic, but I desperately need help.
I put ICS on my Dads Samsung Galaxy a few days ago, and left him to it after that. He decided he didn't like it and without asking me about it, decided to restore it back to GB through CWM recovery. He's now stuck on the boot screen every time he starts his phone.
I'd really appreciate some help here guys.
Thanks in advance.
Sent from my GT-I9100 using XDA
try wipe cache and dalvik cache and reboot from recovey...
if no hope try wipe data factory reset and do again a restore..
I like your dad's decision - the way he went about it is obviously flawed...
Standard bootloop? Flash stock etc. Backup?
zaheedahmed said:
try wipe cache and dalvik cache and reboot from recovey...
if no hope try wipe data factory reset and do again a restore..
Click to expand...
Click to collapse
I've done all of the above. Still stuck on the 'Galaxy S GT-I9000' screen :/
Sent from my GT-I9100 using XDA
Wipe data/cache from the recovery menu and then try a restore.
if doesnt work probably there are some corrupt files in the backup so wipe and then flash the rom you(your dad ) want.
WARNING : Wiping data would make you loose all your apps but amything in the 'sdcard' wont get effected
Sent from my GT-I9100 using xda premium
B3311 said:
I like your dad's decision - the way he went about it is obviously flawed...
Standard bootloop? Flash stock etc. Backup?
Click to expand...
Click to collapse
He's such an idiot some times.
It's not even a boot loop to be honest...its just permanently stuck on one screen :/
Sent from my GT-I9100 using XDA
Ba7rani123 said:
Wipe data/cache from the recovery menu and then try a restore.
if doesnt work probably there are some corrupt files in the backup so wipe and then flash the rom you(your dad ) want.
WARNING : Wiping data would make you loose all your apps but amything in the 'sdcard' wont get effected
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I've done all the possible wipes.
I'm unable to access the SD card or internal storage through cmw...
Sent from my GT-I9100 using XDA
The only thing I can think of is flashing ICS through Odin on my PC..?
Sent from my GT-I9100 using XDA
are you able to access your back up?
flash a ROM from ODIN....
I know. Could you find me a link to the from I need please? I'm unsure as to what one I would need...
Sent from my GT-I9100 using XDA
http://forum.xda-developers.com/showthread.php?t=1544487
choose a rom from above,
guide for ODIN flash is there in my signature
zaheedahmed said:
are you able to access your back up?
flash a ROM from ODIN....
Click to expand...
Click to collapse
I agree with zaheedahmed, I think if u cant access using cwm, try flashing a ROM using ODIN
Sent from my GT-I9100 using xda premium
zaheedahmed said:
http://forum.xda-developers.com/showthread.php?t=1544487
choose a rom from above,
guide for ODIN flash is there in my signature
Click to expand...
Click to collapse
Thanks a lot! Once it's been downloaded and flashed I'll get back to you! Thanks so much. You saved me ass big time!
Sent from my GT-I9100 using XDA
you are most welcome buddy
feel free to ask more...
make sure keis not runnig, kill it before open ODIN....
zaheedahmed said:
you are most welcome buddy
feel free to ask more...
make sure keis not runnig, kill it before open ODIN....
Click to expand...
Click to collapse
Will do!
Also, the reason for him wishing to restore was something to do with the fact his phone calls weren't working. He said he posted on here through this account and got no reply so decided to try and restore it.
He can make and answer calls, but he can't hear or be heard by the other person.
Any idea?
Sent from my GT-I9100 using XDA
now the things are already on the midway...lets see after flashing the new ROM,
Odin froze and closed. The phone is now unresponsive. Help!?!?!?!?!?!?
Sent from my GT-I9100 using XDA
zaheedahmed said:
http://forum.xda-developers.com/showthread.php?t=1544487
choose a rom from above,
guide for ODIN flash is there in my signature
Click to expand...
Click to collapse
OP, I thought you said your dad's phone is a Galaxy S, not an S2? Well this is a link to S2 firmwares.
Edit: went back and read... Yup, you said he is stuck on the i9000 screen. You are better off asking for i9000 help in the i9000 forums...else people will assume you are talking about an i9100, and tell you to do things for the i9100, like above.
ctomgee said:
OP, I thought you said your dad's phone is a Galaxy S, not an S2? Well this is a link to S2 firmwares.
Click to expand...
Click to collapse
F*CKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK.
Okay, well now I'm definitely screwed.
ctomgee said:
OP, I thought you said your dad's phone is a Galaxy S, not an S2? Well this is a link to S2 firmwares.
Edit: went back and read... Yup, you said he is stuck on the i9000 screen. You are better off asking for i9000 help in the i9000 forums...else people will assume you are talking about an i9100, and tell you to do things for the i9100, like above.
Click to expand...
Click to collapse
I posted in there, and got no response. It's like a graveyard in there!

[SOLVED] my i9100 died on me, what now!

well guys seems my sgs2 i9100 died on me.
I'm an experienced user so I know what I'm doing, but this time seems it died.
what happened.
flashed new LQ5 sammy rom via odin for a quick test drive, all went smooth and tested all I had to test.
then it was time to flash another rom via odin.
as always before flashing another rom, I boot into fake recovery using cwm 5.8.1.5 and erase all partitions, system,data & cache and then reeboot straight to download mode to reflash the other rom via odin.
well this time, after erasing partitions I reebooted but it just went dead.
I tried about everything, even booting with usb jig into download mode, but it just doesnt work. screen is always black no message no signal no nothing.
what can I try to before RMA this Sucker ?
edit: solved by repair center replacing PBA MAIN
tks in advance,
remorema
remorema said:
well guys seems my sgs2 i9100 died on me.
I'm an experienced user so I know what I'm doing, but this time seems it died.
what happened.
flashed new LQ5 sammy rom via odin for a quick test drive, all went smooth and tested all I had to test.
then it was time to flash another rom via odin.
as always before flashing another rom, I boot into fake recovery using cwm 5.8.1.5 and erase all partitions, system,data & cache and then reeboot straight to download mode to reflash the other rom via odin.
well this time, after erasing partitions I reebooted but it just went dead.
I tried about everything, even booting with usb jig into download mode, but it just doesnt work. screen is always black no message no signal no nothing.
what can I try to before RMA this Sucker ?
tks in advance,
remorema
Click to expand...
Click to collapse
Well nothing, there are only to things that can resurrect this paperweight for you, and my guess is that you have neither of them
1. Fix it using JTAG
2. Change the PCB
So send it off to a repair centre near you mate
Best regards
Sendt fra min GT-I9300 med Tapatalk2
Ratata82 said:
Well nothing, there are only to things that can resurrect this paperweight for you, and my guess is that you have neither of them
1. Fix it using JTAG
2. Change the PCB
So send it off to a repair centre near you mate
Best regards
Sendt fra min GT-I9300 med Tapatalk2
Click to expand...
Click to collapse
I have good soldering skills but For jtag looks like there´s a box needed, and since its still under warranty I guess I'll try to RMA before opening and permanently void my warranty.
Sounds like you hit the eMMC brick. I know this sounds cruel but it gave me the heads up as I was about to flash the new LQ5 ROM. Might think twice about it. Don't mess about with it, just send it off for repair and play dumb.
Sent from my GT-I9100 using Tapatalk 2
themadba said:
Sounds like you hit the eMMC brick. I know this sounds cruel but it gave me the heads up as I was about to flash the new LQ5 ROM. Might think twice about it. Don't mess about with it, just send it off for repair and play dumb.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I think it has to do with the fake recovery. once this LQ5 firmware as a new pit file different from the older gingerbread one. and the fake recovery might not be prepared to deal with the partitions the way this new pit repartitoned
If you stay off the recovery, the rom works flawlessly, its my bad habbit of formatting the partitions before flash that screwd me
its nice that I have a usb jig and the counter is zero that way they cannot acuse me of using non official firmware.
Can you explain to me what the “fake" recovery is? Do you mean custom recovery?
Sent from my GT-I9100 using Tapatalk 2
themadba said:
Can you explain to me what the “fake" recovery is? Do you mean custom recovery?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
this http://www.clockworkmod.com/rommanager
you can boot into stock recovery and from there boot into fake recovery without the need to having a custom recovery installed in your phone.
Interesting. You didn't have ClockworkMod Recovery then? Because ROM Manager and CWMR don't get on together. Just return your phone to Samsung and say the update failed in Kies. It's a 50/50 chance they will fix it. But it's worth a try.
Sent from my GT-I9100 using Tapatalk 2
The same has happened to me after an LQ5 NanDroid backup. Phone is dead, cannot boot, get recovery to start, no Odin, no Jig; nothing. Will it have to be sent for repair peeps?
Sent from my HTC Desire using XDA App
fs1023 said:
The same has happened to me after an LQ5 NanDroid backup. Phone is dead, cannot boot, get recovery to start, no Odin, no Jig; nothing. Will it have to be sent for repair peeps?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
either that or a jtag box.
Sent from my STM712HCZ using Tapatalk 2
Well if it is the eMMC brick, even a JTAG repair won't save it. A new motherboard is in place. Just send it to Samsung and play stupid
Sent from my GT-I9100 using Tapatalk 2
This is really bad if Samsung enabled MMC_CAP_ERASE in this new kernel, they absolutely should not have done this given the known consequences...
Sent from my GT-N7000 using Tapatalk 2
themadba said:
Well if it is the eMMC brick, even a JTAG repair won't save it. A new motherboard is in place. Just send it to Samsung and play stupid
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
if jtag cant save it does that mean samsung wont be able to confirm what appened to the board?
Sent from my STM712HCZ using Tapatalk 2
remorema said:
if jtag cant save it does that mean samsung wont be able to confirm what appened to the board?
Sent from my STM712HCZ using Tapatalk 2
Click to expand...
Click to collapse
if ur phone is bricked samsung will not knw wat u had done
just act stupid in front of them
i did the same thing when i had bricked by phone
i told them i was updating the phone in kies and after that my phone din start
What build did you die on? Saying "LQ5" is useless - with ICS you MUST include the FULL build identifier including region code when talking about a given build.
Well now I might be little more cautious, but I have wiped multiple times using the dial code and it worked fine.
Might be the touch recovery done something or you!
Have to be sure before everyone gets Bizzurk about the Emmc brick, which we didn't have until now.
Fix it by JTAG / univ on Samsung Centre
Sent from my GT-I9100 using xda premium
neerajganga said:
if ur phone is bricked samsung will not knw wat u had done
just act stupid in front of them
i did the same thing when i had bricked by phone
i told them i was updating the phone in kies and after that my phone din start
Click to expand...
Click to collapse
yep
will do that
Sent from my STM712HCZ using Tapatalk 2
The LQ5 release the OP is talking about is the leaked Samsung release of 4.0.4 for the GS2. Leaked a few days ago by sammobile.com. Is there any way to tell if the MMC_CAP_ERASE is still present in Samsung's new kernel? Or that is is at least equal to 0?
Sent from my GT-I9100 using Tapatalk 2
Mobile Odin Pro
Just a heads up. I purchased and used Mobile Odin Pro from since the release and have always used that ever since to flash leaked or official samsung roms due to the fact the pc version bricked my i5800 years back. Happy to say, It never failed me, Also it has support for Wipe Data and Also Dalvik cache. Options to Enable Ever Root, Inject Super Su (Best), And Mobile Odin so your always ROOTED :good:. Gotta hand it to Chainfire for his awesome works. I would suggest for everyone to use it for a worry free Day anytime changing non custom recovery roms, also I have had problems using superuser in the past when trying to install CWMR. Never with Super SU Pro, That's why I use it. Before thinking this post is not useful, think about it, you would be able to wipe data before flashing with no need to worry and perform it via fake recovery or CWMR. Also Odin performs MD5 checksum at your request to ensure its official.

Brick after Rom Manager Reboot?

Hi
I searched and only found similar cases with other phones and no solution.
I was on stock 4.0.3 with CWM, rooted and siyah kernel and tried to upgrade to CM9
with Rom manager
i dled cm9 with gapps and let ROM Manager do the backup, wipe and reboot to recovery
but then i just saw the first GT 9100i boot screen with the triangle and after that
the screen stayed black.
i noticed in a darker area that the screen blinked everey few seconds, so i guess its trying to reboot all the time. some kind of bootloop?
i cant access the cwm, nor boot normaly.
just the download mode is working
so i tried to flash a stock FW from intratechs thread via odin
but... FAIL
help would be much appreciated right know :crying:
thank you
Mmm I've had issues with rom manager before but never this severe. All I can suggest is what I would do which is to fash stock firmware from samfirmware via PDA section in odin. If this doesn't work I think there is a sticky thread which is dedicated to situations like this. It requires flashing a firmware via odin again but all partitions are used so it will wipe your device. All the best.
Sent from my GT-I9100 using xda premium
skarboy said:
Hi
I searched and only found similar cases with other phones and no solution.
I was on stock 4.0.3 with CWM, rooted and siyah kernel and tried to upgrade to CM9
with Rom manager
i dled cm9 with gapps and let ROM Manager do the backup, wipe and reboot to recovery
but then i just saw the first GT 9100i boot screen with the triangle and after that
the screen stayed black.
i noticed in a darker area that the screen blinked everey few seconds, so i guess its trying to reboot all the time. some kind of bootloop?
i cant access the cwm, nor boot normaly.
just the download mode is working
so i tried to flash a stock FW from intratechs thread via odin
but... FAIL
help would be much appreciated right know :crying:
thank you
Click to expand...
Click to collapse
Can you still get into Download Mode?
EDIT:
Try manually wiping data, cache and dalvik cache.
Try to go into recovery. Hold down volumen up, home key, and power on, at once hold them down ontil you reach recovery.
Sendt fra min GT-I9100 med Tapatalk2
I had that problem too-a black screen with a flash down the rh side of the screen every few seconds.
I managed a repair via odin after a couple of attempts.
Sent from my GT-I9100 using xda premium
Flash a stock kernel then wipe everything the recovery it comes with. Also make your flashing roms for your 9100i model.
Sent from my GT-I9100 using Tapatalk 2
thank you very much
i just reflashed a few times as adviced with my dled rom
am on stock again
retry without rommanager
ftw
Remove rom manager and dont use it again on your s2.
Sent from my GT-I9100 using xda premium
skarboy said:
thank you very much
i just reflashed a few times as adviced with my dled rom
am on stock again
retry without rommanager
ftw
Click to expand...
Click to collapse
I have the very same problem as you.
I can enter download mode but can't enter recovery mode.
I can flash any rom I can find but all of them have no use.
Still can't boot nor recovery.
Have you fixed the problem just by reflashing stock rom?
theunderling said:
Remove rom manager and dont use it again on your s2.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
This. How many times people saying:Rom manager doesn't work on S2 100%!!! Read people, read again before doing something!!
Mr.Greg said:
This. How many times people saying:Rom manager doesn't work on S2 100%!!! Read people, read again before doing something!!
Click to expand...
Click to collapse
Yes, that's our fault that haven't read enough before installing a software.
But is there any way to revive our phone?
wm_shi said:
Yes, that's our fault that haven't read enough before installing a software.
But is there any way to revive our phone?
Click to expand...
Click to collapse
the only way to revive ur phone, is to flash a stock ICS 4.0.3 firmware thro 'ODIN' and have a clean boot of ur phone
and never use 'Rom Manager' in the future

Help please recovery

Hi ok i rooted and loaded the nandroid of the JB thats floating the forum, I deleted some bloat wear theninstalled chainfire, so I opened it up and installed the drivers etc and it restarted, only to go no where
Here's what I have
Android system recovery <3e>
Options to choose from
Reboot system now
Aply update from abd
apply update from ext storage
wipe data factory reset
wipe cache partition
apply update from cache
a picture of a dead android with a red triangle coming out of his belly
now i tried adb but doesnt bring up the device when adb devices
I dont got another rom to apply only 2 nands
How can I get out of this mess please??????????
That is stock android recovery.
What happens when you hit reboot system now?
Sent from my GT-I9300 using xda premium
nodstuff said:
That is stock android recovery.
What happens when you hit reboot system now?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Just sticks on the galaxys s3 logo
Well you can try hit factory reset (will wipe everything, including internal storage)
Flashing cwm via Odin
Flashing a stock ROM via Odin.
Sent from my GT-I9300 using xda premium
nodstuff said:
Well you can try hit factory reset (will wipe everything, including internal storage)
Flashing cwm via Odin
Flashing a stock ROM via Odin.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
FActory reset done nothing
Can anyone point me in the right direction on how to do this through odin?
Kickasskev said:
FActory reset done nothing
Can anyone point me in the right direction on how to do this through odin?
Click to expand...
Click to collapse
When the ROM is booting it usually stays on the Samsung logo for a few minutes as it boots/builds dalvik-cache and all that jazz.
How long did you wait?
Do you have Odin already?
You'll need to download a stock ROM to flash first of all, or if you want there is am Odin flashable version of the jellybean ROM you flashed.
Sent from my GT-I9300 using xda premium
nodstuff said:
When the ROM is booting it usually stays on the Samsung logo for a few minutes as it boots/builds dalvik-cache and all that jazz.
How long did you wait?
Do you have Odin already?
You'll need to download a stock ROM to flash first of all, or if you want there is am Odin flashable version of the jellybean ROM you flashed.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It doesnt get past the first lot of writing, just holds there saying galaxy siii gt i9300
I have odin already but thats it
Kickasskev said:
It doesnt get past the first lot of writing, just holds there saying galaxy siii gt i9300
I have odin already but thats it
Click to expand...
Click to collapse
Oh OK, you'll need to flash it so.
download whatever stock ROM you need from samfirmware.com or the jellybean leaked one (Odin in title) and we'll talk then. (700+mb)
You can flash whatever firmware you want from samfirmware.com (obviously for gt-i9300) but region doesn't matter, I used XXBLG8 firmware. (UK)
Sent from my GT-I9300 using xda premium
nodstuff said:
Oh OK, you'll need to flash it so.
download whatever stock ROM you need from samfirmware.com or the jellybean leaked one (Odin in title) and we'll talk then. (700+mb)
You can flash whatever firmware you want from samfirmware.com (obviously for gt-i9300) but region doesn't matter, I used XXBLG8 firmware. (UK)
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks
downloading I9300OXABLG8
Wonder what happened an where the hell my recovery went??
Wont be installing chainfire anymore
Kickasskev said:
Thanks
downloading I9300OXABLG8
Wonder what happened an where the hell my recovery went??
Wont be installing chainfire anymore
Click to expand...
Click to collapse
Chainfire didn't get rid of your recovery, stock android has a file in ota's which overwrites custom recoveries on boot, i think flashing cf-root seems to solve this problem, I still have my custom recovery after several reboots.
Chainfire3d may not be compatible with sammy jellybean just yet.
Sent from my GT-I9300 using xda premium
nodstuff said:
Chainfire didn't get rid of your recovery, stock android has a file in ota's which overwrites custom recoveries on boot, i think flashing cf-root seems to solve this problem, I still have my custom recovery after several reboots.
Chainfire3d may not be compatible with sammy jellybean just yet.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Just sorted it out and got it working, thanks so much for your help much appreciated :good:

Categories

Resources