Related
Hi all. I have multiple problems in my x10i.it has 2.1 It was rooted and worked fine..few days ago I tried to wipe the phone and did the master reset via xrecovery ..after the restart it just hanged at the boot logo and xrecovery is not working from then....I wanted to update with SEUS via USB... but the phone is not connecting as well...What should I do? PLZ HELP ME GUYZ........
Hi,
Seus doesn't recognize your x10 even if you hold back button while plugging usb (flash mode) ?
This week my x10 2.1 crashed (I suppose it was because of rooting with superoneclick without rebooting immediatly), and wasn't recognized by windows. It was in a loop turnig on/off and only putting off battery could turn it off really. Big Problem.
The only solution I found : putting off battery, pluggin usb cable, holding back button and putting on battery. Back button still hold (like flash mode) until seus recognize x10. Then it runs alone and install rom (after I rooted with flashtools and launched jit optimisation, witch increase truely x10 performances!).
Probably seus not recognize your phone because you have a rooted and custom firmware in your x10 and xrecovery is not working because you did a reset and then you delete some files from your phone, you can reinstall it with the x10flashtool or to make a complete restore firmware whit the same x10flashtool
If SEUS/PCC doesn`t recognize your phone, remove them from PC and reinstall them.
You have an USB driver problem
ohm74 said:
Hi,
Seus doesn't recognize your x10 even if you hold back button while plugging usb (flash mode) ?
This week my x10 2.1 crashed (I suppose it was because of rooting with superoneclick without rebooting immediatly), and wasn't recognized by windows. It was in a loop turnig on/off and only putting off battery could turn it off really. Big Problem.
The only solution I found : putting off battery, pluggin usb cable, holding back button and putting on battery. Back button still hold (like flash mode) until seus recognize x10. Then it runs alone and install rom (after I rooted with flashtools and launched jit optimisation, witch increase truely x10 performances!).
Click to expand...
Click to collapse
nope, phone is not connecting in flash mood..i pulled of the battery and did as u said,,nothings working ......
Take the phone with the warranty for repairing.
mistake_man said:
Probably seus not recognize your phone because you have a rooted and custom firmware in your x10 and xrecovery is not working because you did a reset and then you delete some files from your phone, you can reinstall it with the x10flashtool or to make a complete restore firmware whit the same x10flashtool
Click to expand...
Click to collapse
one more thing....i checked the device manager se drivers r working f9.....when i connect phone via usb cable the green light automatically turns on....even b4 i press back key
iMatth3w said:
Take the phone with the warranty for repairing.
Click to expand...
Click to collapse
I bought it from ebay ...no warrenty... think thats stupid :/
rumanbsl said:
nope, phone is not connecting in flash mood..i pulled of the battery and did as u said,,nothings working ......
Click to expand...
Click to collapse
Did you wait for at least 30 seconds before putting battery inside phone (to make sure clearing all memories? And sure you hold back button before, during and after?
Otherwise, what does happen if you press and hold volume button before turning on the phone (and keep volume button hold)?
rumanbsl said:
one more thing....i checked the device manager se drivers r working f9.....when i connect phone via usb cable the green light automatically turns on....even b4 i press back key
Click to expand...
Click to collapse
Well your usb is definitly working then as its glowin green?..
Are you sure you are doing it all right? It happened the same to me, and it ended I was pressing the wrong buttom (I knew which one was the correct one, but was blind cause I was scared that Ive broke it totally), a day later I noticed it and I was able to flash my phone.
However, read a guide and follow it step by step, reinstall everything and start from beginning maybe?
Or use the repair function with PC Companion
Hi! I had the same problem!
1. Search and download from this forum Flashtool 0.2.6
2. Install it.
3. Download from this forum one generic ROM (for exemple X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897 )
4. Put the file in directory Flashtool/firmware
5. Launch X10flashtool.exe
6. DO NOT PUT THE USB CABLE IN THE PHONE
7.From option "flash select the desired ROM
8. Wait the program to begin(a picture will appear)
9. Pressing the back button, insert the usb cable.
10. Wait the flashing to begin and release the back button.
Follow instructions and WAIT around 5 minutes until flashing will complete
11. Send me two words if it helps you! Success!
ohm74 said:
Did you wait for at least 30 seconds before putting battery inside phone (to make sure clearing all memories? And sure you hold back button before, during and after?
Otherwise, what does happen if you press and hold volume button before turning on the phone (and keep volume button hold)?
Click to expand...
Click to collapse
I've did everything as u told.....no luck ! guess its the time to go to repair center...btw a guy from help center told me about software tampered,,!!out of luck
My name is ovidiu and i need your help!!!!!!
Yesterday i tray to change from 2.3.3. To 2.3.4. On a sgs2.....but i didnt wait to finish and i unpluget the usb cable from the phone and right it doesn't open it!!
What can i do!!sorry for disturbing u!!cheers !!AND TODAY I BUY A USB JIG FOR THE SGS2 BUT IT DOESN'T WORK!!!
Use Odin to flash a new kernel (Clockwork Recovery for example) as PDA. This time do NOT unplug before its finished.
Remember to flash the kernel while you're in DOWNLOAD MODE: Vol down + Home + Power
Try to get into either recovery or download mode.
TURN PHONE OFF
VOLUME DOWN+HOME BUTTON+POWER
IF IT WORKS, PLUG IN AND OPEN ODIN AND FLASH AGAIN
hope it works for you
Sent from my GT-I9100 using XDA Premium App
Thoes buttons doesn't work anymore.the screen is black...in this case what can i do???
m2smoe said:
use odin to flash a new kernel (clockwork recovery for example) as pda. This time do not unplug before its finished.
Remember to flash the kernel while you're in download mode: Vol down + home + power
Click to expand...
Click to collapse
this steps that u told me to do ,it doesn't work in may situation.cand u tell me plz another solution!!!>....plzz
So you mean your device is completely dead? No Download mode, no keys are working, right?
Have you tried to pull out the battery for some secs and put it back again?
Regards.
Yes try to remove battery and put back in, and if nothing works then you broke the phone, time to send it back (tell them you did samsung kies update and this happened)
m2smoe said:
yes try to remove battery and put back in, and if nothing works then you broke the phone, time to send it back (tell them you did samsung kies update and this happened)
Click to expand...
Click to collapse
but as i told u,i root it,and i'm afraid they will see it.is possible???
And when u plug in to battery charger, nothing happen too ?
if no, i think that your GS is dead .. sorry for u
ovidiumihai05 said:
but as i told u,i root it,and i'm afraid they will see it.is possible???
Click to expand...
Click to collapse
If you have tried all the things suggested and the phone cannot switch on, then how do you think Samsung will switch it on?
Right now you have an expensive paper-weight. And to be honest, you deserve it. The instructions for flashing the ROM will have told you not to unplug the USB until the flashing process was finished and roughly how long the flashing time would take.
So you have nothing to loose returning it to Samsung saying that it happened updating their KIES.
guyz i received an update from .6x to .7x firmware notification yesterday in Sony bridge for mac.
so i connected it and gave update.
it said to switch on the mobile (successfully updated).
i pressed the power button for a long time also . no sign of switching on.... even i tried power+ volume down button also.... no sign of switching on...
help me out guyz...
try to repair it via SEUS.
when i try to connect to mac...just orange notification led glows... it does not detect itself.....
did u run the SEUS? i think instructions will be posted on your screen once u do the repair. i dont have mac so i dont know if its the same process with windows, anyway try to run the SEUS and it will ask you to connect your phone, if it does not connect try to download the driver for your phone and install it, then try to connect it again.
or if u want
you can try to download an orig ftf then flash it on your phone.
first you need a flashtool
http://forum.xda-developers.com/show....php?t=1588586
and then u need the ftf (orig)
http://forum.xda-developers.com/show....php?t=1599303
and for the instructions on flashing the original firmware
http://forum.xda-developers.com/showthread.php?t=928343
if u choose to flash using flashtool:
since your phone is not booting, once you have the necessary files and place the firmware on the folder of flashtool, (c:flashtool/firmware/your downloaded firmware), open the flashtool then click the lightning icon and choose flashmode and choose your firmware, then connect your phone via flash mode (power button + volume down), this will not connect immediately, what will you do is to push the power button+ volume up and wait until it vibrates 3 times, then after that push the power button+volume down, then the pc will detect your phone and flash the firmware, and then wait until it finish, once finished power on your phone. ( it happens to me also that my phone does not turning on and thats what i did).
Plug it into charger to charge for a while.
i tried to charge it for an hour also... no response.....
or you can go to the store where you buy the phone and have them repair it, its still under warranty right?
I have same problem and this is the way worked back
I had encounter this problem just this morning cz I "repair" my phone by using PCC.
I let it overnight cz when I did it already midnight.
When morning I woke up, I found that the phone was totally shut down and I was unable to turn on the phone.
I was worried at that time and even I charge my phone I cant switch on the phone.
I let the phone charge for very long time, using the adapter charger. Then I try to pull out the sim card and wait long time just put back the sim card, suddenly the phone switch on by itself.
But i really dunno why. Hehe
This is my way. Hope will help you
I have the same problem, how long i must wait until try to insert again the sim card???
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
bokivaol said:
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
Click to expand...
Click to collapse
Happened to me b4 if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
Leave your phone plugged in and press POWER-HOME and BACK all together, as soon as the screen turns completelly black (backlight off too) releast POWER and HOME, and leave the back-button pressed, that will probably work too.
LukBoy99 said:
if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
Click to expand...
Click to collapse
Can you explain me a little more detailed, i didn't get you very well. I am noob
How do you mean until I reach connection step, where should I reach connection step?
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
SmG67 said:
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
Click to expand...
Click to collapse
It doesn't work.
I tried and POWER-BACK-HOME buttons while the phone is plugged in (turned off and turned on), same sh..t. Phone starts like that I powered it on
stitypta had
What do you think, what will happened if I wipe it using CWM? Can I brick it on that way?
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
SmG67 said:
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
Click to expand...
Click to collapse
Does this mean that I have hardware problem. Phone works without any problem.
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
SmG67 said:
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
Click to expand...
Click to collapse
I didn't flashed it before, I couldn't do that. I couldn't unlock bootloader, because I couldn't boot it in flash mode (phone just show that battery charging), after installing CWM now phone even don't show that battery is charging (it turns on when I plug in USB in the phone without holding any button). This is nightmare!
You are still on the original firmware then?
I mean, your phone still works?
SmG67 said:
You are still on the original firmware then?
I mean, your phone still works?
Click to expand...
Click to collapse
Yes, I am on original firmware and phone still works, but I have problem to boot it in flash mode. When I plug in USB cable in the phone it turns on, like that I pressed POWER button. I don't press any button, but when I plug in usb cable 10-20 seconds and phone is on.
Yes, because your phone detects the usb-cable getting plugged in, even when it's off, it thinks you want to charge it, so (normally) it loads the kernel in order to start the charging-process, that is normal behaviour. I have been on a kernel that didn't support that feature, and it booted into the full rom before it started charging.
In short: the usb-port also functions as a power-button, sort off
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
Yes, the back button works perfect, closing apps (not close apps, but back to the phones "desktop"), back to previous pages in browser...
I am concerned because, before I installed CWM , when it was OFF and plugged in on USB, phone just showed black screen and when I clicked on some button I could see that battery is charging, that was all. Now, when I plug in USB it turns on like I pressed POWER button.
And off course never booted in flash mode because it turns on
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
What is app-drawer, I don't know what is that.
oh, that's the bit where you find all your installed apps, the grid you see when you press on the little triangle on the bottom of your desktop, or swipe up on the desktop.
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
SmG67 said:
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
Click to expand...
Click to collapse
I solved problem about POWER-ing on when I plug in USB. I installed new ROM "MiniCM7Pro_V21_Paul_XXX" via CWM because I didn't need to boot it in flash mode and now when I plug in USB I got that it charging battery and orange led diode.
But I can't boot it in flash mode even with new ROM, all the time orange led diode when I hold back button and plug in USB. I wiped out all date except something about "battery" from Advanced CWM options.
bokivaol said:
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Click to expand...
Click to collapse
i dont have time to read if this was resolved but you need to leave your phone of for about 2 min the little bugger holds a charge for quit a bit you got one of the newer ones like mine i got this info from sony website at least 30sec power off before attempting to do the above steps also i do know how to get the phone out of this refer to the this thread http://forum.xda-developers.com/showthread.php?t=1635286&page=2 i only know this cause iam you !! lol as soon as i find a stock rom boom i am
http://minus.com/lbg0XZRW728Kwu ling for stock rom bro
follow step for step with the referance link above to reflash stock rom thanks that dude that told me
and it works cause i rebricked it lol i reflashed the same rom that did this to my phone and so far all above steps in referance link seem to be working"
http://forum.xda-developers.com/showthread.php?t=1636504 follow to the t you hav i.c.s 4.0 i guess works like a charm ! between both guides 25 min !!! yesterday i put 7hrs !! enjoy bro and thank thank the guys that root me they are the true credit iam just passing the info on too you that i got from both guides. look at my post and you will see i had this problem follow these steps and you will be fine remeber firs boot is the longest
best thing that ever happened to me was i bricked my my xperia mini pro u20 haha got ics out it lol
Hi,
I have the SE X10i, one day i tried to power it on and it showed the 3 flash red light, so i charge the battery and then tried to power on the phone.
The phone vibrate once and nothing going up, the screen stay black, no light at the keys.
I tried to install new rom via SERUS, it fails.
tried install via flashtool and it stuck on flashing loader.
As i understand from the flashtool the phone can get into flashmode.(back key and insert the usb cable).
Any help please how to wake up this phone alive.
Thanks.
wo88les said:
In flashtool select the Rom you want to flash
Remove battery
Insert USB cable
When software asks you to press back, hold back while putting battery back in, should go straight to flash mode and flash
Sent from my Xperia X10 using xda premium
Click to expand...
Click to collapse
Also try downloading another stock Rom, maybe the one you have has became corrupted?
Hope that helps if not, you may need a more senior member to help
Sent from my Xperia X10 using xda premium
pumemule said:
Hi,
I have the SE X10i, one day i tried to power it on and it showed the 3 flash red light, so i charge the battery and then tried to power on the phone.
The phone vibrate once and nothing going up, the screen stay black, no light at the keys.
I tried to install new rom via SERUS, it fails.
tried install via flashtool and it stuck on flashing loader.
As i understand from the flashtool the phone can get into flashmode.(back key and insert the usb cable).
Any help please how to wake up this phone alive.
Thanks.
Click to expand...
Click to collapse
Hey pumemule,
Turn off phone or take out battery
Conect your USB cable to PC
Open Flashtool
Select Kernel that you wanna flash
Wait for pop up message
Connect your phone
Hola BACK button
Re-insert the battery
check this video to show you how to put on flashmode Xperia X10 on flashmode
You can check any for any stock ROM on android development
Hope that helps
Regards
First download the stock ftf file from the below link
http://forum.xda-developers.com/showthread.php?t=1749426
Turn off phone and take out battery
Conect your USB cable to PC
Open Flashtool
Select Kernel that you wanna flash (stock Rom)
hold back button
Re-insert the battery
Connect your phone
a green led will appear.....
then the work is done......
restart your phone
It helped me a lot...
and many people